Mechanical design engineer jobs in Town North Country, FL - 469 jobs

where associates are heavily supervised and are expected to learn and assist with all engineering design aspects of a project. Once trained, associates in this position will be responsible for their own design projects and may check the work of others. Responsibilities Design all parking deck, building, and wall products, and associated connections With assistance, design laterals Independently manage engineering design aspects of a project with minimal assistance or guidance Review contract documents to be familiar with project requirements Attend project meetings as directed; may lead coordination meetings May write requests for information (RFI) With assistance, answer questions from drafting subcontractors Resolve engineering design issues independently (with the exception of laterals) Assist others with resolving engineering design issues (with the exception of laterals) Check engineering design calculations and details of others for accuracy, efficiency, and adherence to Metromont standards (with the exception of laterals) and Engineering Design Process Review erection drawings, master shop tickets, and any additional shop tickets to ensure designs and standards are followed With assistance, complete repairs Must adhere to all Metromont and OSHA safety rules and regulations. Job Description Strong personal organization skills Above average ability to manage multiple priorities Self-motivated Demonstrated ability to manage multiple projects and priorities, maintain project schedules, and work effectively within a project team Above average assertiveness; proactive addressing issues or problems on projects Able to adapt to changes in work schedules, tasks, or processes Values and demonstrates safe working behaviors Strong communication skills Able to document ongoing information on projects for record keeping purposes BS Civil Engineering required

Designs manufacturing processes, procedures and production layouts for CCA and module assemblies. Cable harness experience and process writing are a plus. Interprets engineering prints to design processes and works with design engineering to implement production improvements. Supports the production floor by working with the operations team and focusing on continuous improvement. Designs, procures, and implements tooling to support manufacturing processes. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations and specifications. Supports the production floor by working with the operations team. Designs manufacturing processes and production layout for circuit card assemblies and subassemblies. Understands how the circuit card process works. Cable harness experience is a plus.

Senior Project Engineer - Heavy Civil Construction Responsibilities Review contracts, plans, and specs in full Support the Project Manager and Superintendent with daily operations Assist with schedules, cost tracking, forecasting, and quantity reporting Solicit pricing from subcontractors and vendors, including change orders Coordinate materials, equipment, subcontractors, and field crews Support billing, cash flow projections, and change order processing Manage project documentation, submittals, permits (NPDES/SWPPP), and record drawings Review daily field reports for accuracy Assist with inspections, testing, utility coordination, and project closeout Handle additional tasks as assigned by the Project Manager Requirements BS in Civil Engineering (Construction Engineering & Management preferred) 5-8 years of heavy civil construction experience (field and/or office) Strong written and verbal communication skills Proficient in Excel, Word, and Primavera P6

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

The Motion and Controls Engineer, a member of the Flight Dynamics Group, is a highly motivated, self-driven team player responsible for the development, integration, testing, and documentation of motion and flight control simulations for flight training simulators across a wide range of fixed and rotary-wing commercial and military aircraft. This role requires experience in aerodynamics, mechatronics, and servo design, as well as the ability to succeed in a fast-paced, dynamic prototyping environment. Responsibilities Develop aircraft test plans and provide on-site data collection support. Post-process aircraft test data and prepare simulator verification data roadmaps. Design simulator motion and control loading systems. Develop aircraft motion and flight control simulation math models and software to execute these models in real-time. Integrate simulation models with simulator hardware, computers, software, and other simulated systems. Prepare simulator qualification test guides and acceptance test procedures. Participate in domestic and international simulator acceptance and qualification events with customers, military organizations, and commercial regulatory agencies. Prepare math model reports and associated simulator documentation. Participate in system requirements, design, and test reviews. Collaborate with other multi-disciplined engineering groups to ensure that overall simulator performance and quality standards are achieved. Maintain currency with the latest domestic and international flight simulator regulations and technologies. Provide technical content for proposals and technical specifications. Essential Skills 1-2 years of experience in developing/integrating flight dynamic models and creating Qualification Test Guides (QTGs) in the flight simulation industry. Bachelor's degree in Aerospace Engineering, Physics, or related field. Experience with feedback control systems. Experience with real-time modeling. Proficiency with modern software systems, including C/C++, Python, Linux, Git. Excellent verbal and written communication skills. Additional Skills & Qualifications Rigorous understanding of servo control and stability. In-depth understanding of fixed and rotary-wing aircraft flight control systems. Knowledge of motion, vibration, and buffet simulation methods. Ability to work independently or in a team environment. Strategic innovator with critical thinking skills. Strong work ethic, accountability, and integrity. Professional and diplomatic demeanor. Ability to travel for extended periods domestically and internationally up to 25% annually. Direct experience designing 6DOF motion systems and/or control loading systems is preferred. Field experience with aircraft testing. Piloting knowledge of fixed-wing and/or rotary-wing aircraft. Work Environment The position offers a unique and interesting work experience with a large organization that supports continued growth and learning. The work schedule follows a 9/80 format, allowing for a balanced work-life experience. This is an onsite role. Job Type & Location This is a Permanent position based out of Lutz, FL. Pay and Benefits The pay range for this position is $95000.00 - $125000.00/yr. benefits relocation package Workplace Type This is a fully onsite position in Lutz,FL. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

This is a U.S. based position. All of the programs we support require U.S. citizenship to be eligible for employment. All work must be conducted within the continental U.S. Who we are: Raft () is a customer-obsessed non-traditional small business with a purposeful focus on Distributed Data Systems, Platforms at Scale, and Complex Application Development, with headquarters in McLean, VA. Our range of clients includes innovative federal and public agencies leveraging design thinking, cutting-edge tech stack, and cloud-native ecosystem. We build digital solutions that impact the lives of millions of Americans. About the role: As an ML Ops Engineer, you will collaborate with a cross-functional data team comprising AI/ML Engineers, DevSecOps engineers, Product Owners, Data Engineers, Data Analysts, and Data Scientists. Your primary responsibility will be to design, build, and maintain the infrastructure and pipelines that enable Machine Learning model training, deployment, and scaling. You will manage distributed workloads across GPU-enabled Kubernetes clusters and ensure efficient resource orchestration between training and inference operations. What we are looking for: 3+ years of relevant hands-on experience Experience building and maintaining machine learning pipelines Strong Python skills for defining and maintaining ML pipelines Practical experience with PyTorch (TensorFlow experience acceptable) Airflow for job orchestration, particularly managing resources between training and inference workloads Strong Kubernetes experience including managing local clusters, running different flavors, and managing custom resource definitions Istio networking experience in Kubernetes environments Experience working with MinIO object storage Must have hands-on experience running GPU workloads on Kubernetes Fast learner, analytical thinker, creative, hands-on, strong communication skills Able to work both independently and as part of a team Excellent problem-solving skills and attention to detail Highly preferred: CENTCOM or DoD experience Experience with time slicing GPUs on Kubernetes\ Exposure to computer vision and/or large imagery formats such as NITF Publications or GitHub repos showcasing your skills Experience with Docker and container orchestration best practices Clearance Requirements: Active TS with ability to obtain and maintain SCI Work Type: Onsite in Tampa, Florida May require up to 15% travel Salary Range: $150,000 to 220,000 The determination of compensation is predicated upon a candidate's comprehensive experience, demonstrated skill, and proven abilities What we will offer you: Highly competitive salary Fully covered healthcare, dental, and vision coverage 401(k) and company match Take as you need PTO + 11 paid holidays Education & training benefits Generous Referral Bonuses And More! Our Vision Statement: We bridge the gap between humans and data through radical transparency and our obsession withthemission. Our Customer Obsession: We will approach every deliverable like it's a product. We will adopt a customer-obsessed mentality. As we grow, and our footprint becomes larger, teams and employees will treat each other not only as teammates but customers. We must live the customer-obsessed mindset, always. This will help us scale and it will translate to the interactions that our Rafters have with their clients and other product teams that they integrate with. Our culture will enable our success and set us apart from other companies. How do we get there? Public-sector modernization is critical for us to live in a better world. We, at Raft, want to innovate and solve complex problems. And, if we are successful, our generation and the ones that follow us will live in a delightful, efficient, and accessible world where out-of-box thinking,and collaboration is a norm. Raft's core philosophy is Ubuntu: IAm, BecauseWe are. We support our "nadi" by elevating the other Rafters. We work as a hyper collaborative team where each team member brings a unique perspective, adding value that did not exist before. People make Raft special. We celebrate each other and our cognitive and cultural diversity. We are devoted to our practice of innovation and collaboration. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionMechanical Design Engineer - Design Build Projects Tampa, Florida | Full-Time | Office-Based with Field Visits We are seeking an experienced Mechanical Engineer to join our client's Design Build team. This role is ideal for a career-minded engineer with strong technical expertise in HVAC and MEP design. You will work closely with sales and project teams to create fully engineered mechanical solutions tailored to client needs. This is a dynamic position that combines office-based design work with occasional field site assessments. With an excellent company culture, competitive compensation, and exciting growth opportunities, this is an ideal role for an engineer ready to make a long-term impact. Basic Qualifications Bachelor's Degree in Mechanical Engineering or related field 5+ years of experience in the MEP industry Proficiency with heating and cooling load calculations Skilled in CAD and drafting software Strong communication and presentation skills Preferred Qualifications Familiarity with HVAC design in healthcare, manufacturing, and commercial settings PE license or progress toward licensure Experience with energy modeling or sustainable design principles Key Responsibilities Collaborate with sales teams to develop fully engineered HVAC/mechanical solutions Conduct on-site surveys to understand customer needs and project scope Design customized mechanical systems to meet client requirements Prepare and present design recommendations and project proposals Generate accurate load calculations and system sizing Support Project Managers and field teams with technical guidance Ensure all designs meet code, compliance, and performance standards Maintain documentation and support handoff to construction teams What Makes This Role Stand Out Career Growth: Join a forward-thinking team with leadership support and room to grow Great Benefits: Employer-paid health insurance, 401(k) match, bonus opportunities, and profit sharing Stability: Work with an established firm known for excellence in MEP design and delivery Supportive Culture: Positive, team-focused environment with frequent employee and family events Work-Life Balance: Office-based role with scheduled field visits and predictable hours Apply now to submit your resume. Please provide as much detail in the resume as possible to expedite recruitment screening.

About Us Zeromark builds AI-driven counter-drone systems that actually work in combat. No PowerPoints. No hype. Just field-proven technology that saves lives. We've doubled year-over-year for two straight years, winning contracts that prove what we've always known: real innovation happens in the dirt, not in conference rooms. Our systems transform standard weapons into AI-powered platforms that detect, track, and neutralize drone threats-because a $200 drone shouldn't require a million-dollar countermeasure. Here's what makes us different: ZeroMark operators don't build from behind screens. You'll validate tech from Blackhawk helicopters, train alongside Tier-1 units (who happen to be our coworkers), and test at legendary ranges from White Sands to the cliffs of Hawaii. When we say field-tested, we mean you'll shoot it, fly with it, and push it to failure. We don't tweet about changing the world-we're too busy actually doing it. Dark humor required, thick skin recommended. If you want to make an actual impact-and have some unforgettable Tuesday afternoons along the way-let's talk. We're all about delivering practical, field-tested tech, not just theories. About the Role The Mechanical Design Engineer will be responsible for the full lifecycle of mechanical design, from conceptualization and detailed design to prototyping, testing, and production support. This role requires a strong foundation in mechanical engineering principles, proficiency in CAD software, and a passion for developing robust and reliable systems in a fast-paced environment. What you'll do Design & Development: Lead the mechanical design of complex defense systems and components, ensuring performance, reliability, and manufacturability. Create detailed 3D models, assemblies, and 2D engineering drawings using CAD software. Perform engineering calculations, simulations (FEA, CFD), and analyses to validate designs. Select appropriate materials, manufacturing processes, and components for designs. Prototyping & Testing: Oversee the fabrication and assembly of prototypes. Develop and execute test plans to validate mechanical designs against performance requirements. Analyze test data and implement design modifications as needed. Collaboration & Communication: Work closely with cross-functional teams including electrical engineers, software engineers, project managers, and manufacturing personnel. Participate in design reviews, providing technical expertise and constructive feedback. Document design decisions, specifications, and test results thoroughly. Continuous Improvement: Stay current with industry trends, emerging technologies, and best practices in mechanical engineering. Identify opportunities for design optimization, cost reduction, and process improvements. What you'll need Required Bachelor's degree in Mechanical Engineering or a related field. 3-5 years of experience in mechanical design, preferably in the defense, aerospace, or a highly regulated industry. Proficiency in 3D CAD software (e.g., SolidWorks, Creo, CATIA). Strong understanding of mechanical engineering principles, including statics, dynamics, kinematics, thermodynamics, and material science. Experience with geometric dimensioning and tolerancing (GD&T). Ability to obtain and maintain a security clearance. Preferred Master's degree in Mechanical Engineering. Experience with FEA and CFD software. Knowledge of various manufacturing processes (e.g., machining, additive manufacturing, injection molding). Familiarity with defense industry standards and regulations. Experience with product lifecycle management (PLM) software. Benefits Competitive salary and comprehensive benefits package. Opportunities for professional development and growth. Engaging work on impactful projects that contribute to national security. A collaborative and innovative work environment.

Power Your Engineering Career with a Leader in Energy Innovation At Lithionics Battery , we don't just build batteries-we engineer intelligent, safe, and high‑performance energy solutions that power the future of transportation, recreation, and commercial electrification. From RVs and marine vessels to industrial EV platforms, our products are trusted in some of the most demanding environments. As a Mechanical Engineer intern on our engineering team, you'll be part of a company recognized for its commitment to innovation, quality, and U.S.-based manufacturing excellence . Here, your work isn't “just an internship”-you'll contribute directly to the systems, components, and processes that support our next generation of energy technology. Join us and help advance electrification in a hands‑on, fast‑paced, mission‑driven environment. What You'll Do As a Mechanical Engineering Intern, you will support our engineering group with real design work, meaningful documentation improvements, and high‑impact product development tasks that integrate directly into our production workflow. Key Responsibilities CAD Database Management Audit, organize, and modernize our existing CAD library to ensure engineering accuracy and reduce retrieval and reference issues. Blueprint Updates & Redlines Apply redline corrections to mechanical drawings, ensuring our documentation reflects the current state of production and engineering changes. Component Design Create 3D models and production‑ready 2D drawings for custom busbars and heatsinks , contributing directly to thermal and electrical subsystem development. Drafting Quality & Standards Enforcement Review mechanical drawings for consistency, accuracy, GD&T use, and formatting-serving as the initial compliance checkpoint before final engineering approval. What You Bring Required Qualifications Pursuing a B.S. in Mechanical Engineering or related field Proficiency in SolidWorks , Autodesk Inventor , or comparable 3D CAD software Strong understanding of technical drawing standards, orthographic projection, and GD&T High attention to detail and a passion for engineering accuracy Preferred Traits Enthusiastic about improving engineering processes A problem‑solver who enjoys technical challenges Curious, proactive, and eager to learn from experienced engineers Proud of delivering clean, consistent, professional engineering work Why Lithionics Battery? Industry Leadership: Be part of a company that sets the bar in lithium‑ion innovation, safety, and performance. Real Impact: Your designs and documentation improvements will be used in products built on‑site and shipped worldwide. Professional Growth: Gain exposure to mechanical design, manufacturing, quality, and electro‑mechanical integration. Collaborative Culture: Work closely with seasoned engineers who value mentorship, craftsmanship, and continuous improvement. Mission‑Driven Environment: Contribute to the rapidly evolving world of electrification and clean energy technology.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. We are seeking a candidate with 1-5 years of experience to join a multi-disciplinary team in our Orlando office. This role will primarily focus on plumbing design as well as other mechanical design tasks. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects. This is a unique opportunity to work alongside architects and other engineers across a multitude of project types (theme parks, airports, college campuses, laboratories, and others). Duties and responsibilities: Works in the responsible charge of a licensed professional engineer Performs plumbing engineering calculations, edits specifications, and prepares design drawings Assists in developing project construction documents, including conducting site visits, producing specifications, developing drawings, sizing equipment and producing cost estimates. Coordinates with the other design disciplines in the delivery of mechanical designs Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations Qualifications 1-5 years of related mechanical/plumbing design Bachelor's degree in mechanical engineering OR Certified Plumbing Designer Understanding of design and construction documents. Proficiency in REVIT. Knowledge of building codes. Self-starter with a proactive attitude Ability to prioritize tasks and meet deadlines Estimated Compensation Range and Benefits $80,000 - $90,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Power Your Engineering Career with a Leader in Energy Innovation At Lithionics Battery , we don't just build batteries-we engineer intelligent, safe, and high‑performance energy solutions that power the future of transportation, recreation, and commercial electrification. From RVs and marine vessels to industrial EV platforms, our products are trusted in some of the most demanding environments. As a Mechanical Engineer intern on our engineering team, you'll be part of a company recognized for its commitment to innovation, quality, and U.S.-based manufacturing excellence . Here, your work isn't “just an internship”-you'll contribute directly to the systems, components, and processes that support our next generation of energy technology. Join us and help advance electrification in a hands‑on, fast‑paced, mission‑driven environment. What You'll Do As a Mechanical Engineering Intern, you will support our engineering group with real design work, meaningful documentation improvements, and high‑impact product development tasks that integrate directly into our production workflow. Key Responsibilities CAD Database Management Audit, organize, and modernize our existing CAD library to ensure engineering accuracy and reduce retrieval and reference issues. Blueprint Updates & Redlines Apply redline corrections to mechanical drawings, ensuring our documentation reflects the current state of production and engineering changes. Component Design Create 3D models and production‑ready 2D drawings for custom busbars and heatsinks , contributing directly to thermal and electrical subsystem development. Drafting Quality & Standards Enforcement Review mechanical drawings for consistency, accuracy, GD&T use, and formatting-serving as the initial compliance checkpoint before final engineering approval. What You Bring Required Qualifications Pursuing a B.S. in Mechanical Engineering or related field Proficiency in SolidWorks , Autodesk Inventor , or comparable 3D CAD software Strong understanding of technical drawing standards, orthographic projection, and GD&T High attention to detail and a passion for engineering accuracy Preferred Traits Enthusiastic about improving engineering processes A problem‑solver who enjoys technical challenges Curious, proactive, and eager to learn from experienced engineers Proud of delivering clean, consistent, professional engineering work Why Lithionics Battery? Industry Leadership: Be part of a company that sets the bar in lithium‑ion innovation, safety, and performance. Real Impact: Your designs and documentation improvements will be used in products built on‑site and shipped worldwide. Professional Growth: Gain exposure to mechanical design, manufacturing, quality, and electro‑mechanical integration. Collaborative Culture: Work closely with seasoned engineers who value mentorship, craftsmanship, and continuous improvement. Mission‑Driven Environment: Contribute to the rapidly evolving world of electrification and clean energy technology.

Job DescriptionAre you a current student searching for an Engineering Internship? BSA is seeking a current Architectural Engineering or Mechanical Engineering student that wants to join a firm that specializes in creating places that support, enhance and inspire healing, learning and discovery. We are now accepting applications for Summer 2026 internship opportunities in our Tampa studio. What You'll Do: Participate in the development of design ideas based on factors such as appealing appearance, design-function relationships, serviceability, and client specifications. Prepare working drawings from sketches and design specification. Prepare presentations and materials for clients. Participate in project design meetings to experience how multi-disciplinary teams collaborate on project design and delivery. Attend client meetings; visit construction sites on projects. Participate in site surveys to gather field data. Education and Experience: Educational Background: Will be a current student of an accredited Mechanical or Architectural Engineering program during Summer of 2026 Software Skills: Familiarity with Revit, 3D CADD, SketchUp Office Tools: Familiarity with Microsoft Windows environment, Microsoft Office Suite Why You'll Thrive at BSA: Our core values define us: Partners: Our employee-owners value team success as well as individual success. Purposeful: Our experts are solution oriented, creating inspired solutions in healing, learning, and discovery environments. Learners: We are constantly striving for expertise and sharing knowledge. Owners: We are committed to a culture of empowerment; thinking and acting like employee-owners to ensure the success of our clients and our business. Ideal Team Players: We are humble, hungry, and smart. If these values resonate with you, we encourage you to apply and take the next step in your engineering career with BSA! BSA is an Equal Opportunity Employer BSA is unable to offer visa sponsorship now or in the foreseeable future. Candidates must be legally authorized to work in the United States without the need for current or future visa sponsorship.

Job DescriptionDescription: Salvo Technologies (Zaffiri Precision) is a fast-growing precision firearm CNC manufacturer serving industries that demand uncompromising accuracy and reliability. We combine advanced machining and manufacturing technology with a commitment to innovation, quality, and teamwork. We are seeking a highly skilled Product Design Engineer Lead who blends creative industrial design with deep mechanical engineering and manufacturing knowledge. This leader will drive new firearm concepts and accessories from initial sketches through production - balancing ergonomics, aesthetics, safety, functionality, and manufacturability to deliver industry-leading products. You will help shape the product roadmap, mentor product designers, and establish scalable design and engineering practices across the company. Position Overview This is a hands-on leadership role for a technical designer/engineer who is equally comfortable sketching form and driving tolerance analyses. The Product Design Engineer Lead will own product design execution, DFM/DFA, prototype cycles, testing, and the transfer of designs into production while coordinating closely with CNC programmers, machinists, QA, Product Development, and Management. The role requires strong judgment around firearm safety, regulatory compliance, and end-user ergonomics. Key Responsibilities · Lead design and development of new firearms, components, and accessories (receivers, slides, frames, triggers, optics mounts, etc.) from concept through production release. · Create and refine 3D CAD models, detailed drawings, and assemblies using SolidWorks, Fusion 360, or similar tools. · Apply industrial design and human factors/ergonomics principles to optimize handling, balance, and user experience. · Perform tolerance analyses, tolerance stack-ups, and engineering calculations to ensure performance and manufacturability. · Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) efforts to minimize cost and cycle time while maintaining high quality. · Collaborate daily with CNC programmers, machinists, and production staff to optimize parts for machining and finishing processes. · Oversee prototype fabrication and iterative testing (bench, field, and durability testing); analyze results and execute design iterations. · Evaluate and select materials, coatings, and surface finishes-working with R&D and Quality to ensure strength, durability, and corrosion resistance. · Ensure designs comply with ATF regulations, SAAMI specifications, ITAR/other export controls, and applicable international standards where required. · Produce and maintain all technical documentation: drawings, BOMs, change orders, test reports, and revision control. · Serve as primary technical liaison between design, production, quality, sales, and customers for product-related technical inquiries and part qualification. · Mentor and lead junior engineers, designers, and technicians; establish and enforce design standards, review processes, and engineering workflows. · Identify and implement continuous improvement opportunities across product design, prototyping, and production processes. · Stay current with trends in materials science, manufacturing technologies (additive, coatings, composites), and firearms design best practices. · Support supplier selection and qualification for specialty processes and components when required. Requirements:Required Qualifications · Bachelor's degree in mechanical engineering, Industrial Design, Manufacturing Engineering, or a related field. · Hands-on experience with modern CNC machinery including programming, setup, and operation. · 5+ years of product design experience in firearms, defense, precision machining, or high-precision mechanical products - experience across both industrial design and mechanical engineering is strongly preferred. · Proficiency in 3D CAD (SolidWorks preferred; Fusion 360 acceptable). · Strong understanding of GD&T, tolerance analysis, and tight-tolerance machining practices. · Practical knowledge of machining, injection molding, casting, finishing, and other relevant manufacturing processes. · Demonstrated experience with prototype development, testing, and design validation. · Understanding ergonomics, recoil dynamics, firearm safety mechanisms, and end-user requirements. · Excellent mechanical intuition, problem-solving ability, creativity, and attention to detail. · Strong documentation skills (drawings, BOMs, test reports) and experience with revision control. · Proven ability to collaborate cross-functionally with engineering, CNC programming, production, and quality. · Collaborate with design, engineering, quality, and production teams to develop and implement CNC machining strategies. · Program, set up, and operate CNC machines to produce high-quality components in accordance with design specifications. · Optimize machining processes through trials, simulations, and tests to identify the most efficient tools, speeds, feeds, and tool paths. · Create and maintain CNC programs using CAD/CAM software, ensuring accuracy and repeatability. · Must be legally eligible to work with controlled firearm components and comply with U.S. ITAR and other applicable regulations. Preferred Qualifications · Direct experience designing tactical or sporting pistols and related components. · Familiarity with FEA or other simulation tools for strength and dynamic analysis. · Experience in rapid prototyping: 3D printing, CNC prototyping, polymer additive methods. · Background in optics, mount systems, or accessory design. · Hands-on firearm enthusiast with experience and understanding of law enforcement, defense, or competitive shooting needs. · Prior leadership experience in product development or engineering team management. · Proficiency in CAD/CAM software such as SolidWorks, Mastercam, or Fusion 360 · In-depth understanding of machining principles, cutting tools, materials, and feeds/speeds optimization. · Strong ability to accurately interpret engineering drawings, blueprints, and technical specifications. Physical & Work Environment Requirements · Ability to work in a manufacturing and prototype shop environment and to be present for prototype builds and testing. · Comfortable handling precision components and assemblies; able to lift up to 35 lbs. when necessary. · Strong attention to detail and capacity for extended focused work during design review and testing activities. · Occasional travel for field testing, vendor visits, or customer meetings may be required.

… The mechanical designer at Power Design is the brain behind the design of mechanical and plumbing systems on our large-scale projects. As the mechanical designer, you'll work on HVAC load and plumbing flow calculations, equipment selections, and ductwork and piping layouts. position details/responsibilities… Coordinate the best design solutions for mechanical and plumbing systems by applying industry knowledge and quality standards while considering customer needs and budgeting requirements. Provide design direction, support and guidance to all team members, including working directly with Revit CADD technicians to ensure quality and review constructability. Communicate effectively with customers, project team members and inspecting authorities. here's what we're looking for… A team player who always acts with customers in mind and thrives in a constantly changing and evolving environment and has at least three (3) years of relevant mechanical/plumbing design experience. Someone with working knowledge of constructability and strong design fundamentals for mechanical and plumbing systems and installation methods required. Experience with VRV, WSHP and DX Split systems and/or CADD/Revit experience, as well as a bachelor's degree in engineering, is preferred. Detailed knowledge of mechanical and plumbing codes. (IPC, IMC, IBC, ASHRAE) An excellent communicator who is able to read and interpret blueprints, submittals and specifications and perform basic plumbing calculations. Knowledge of HVAC load calculations using Trane Trace or similar HVAC load and energy analysis programs, as well as experience in duct sizing, layout and design for air systems. Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation and growth. some of our benefits… Power Design has national health and dental plans, and we also offer life insurance and short and long term disability plans. You'll receive paid vacations and holidays as well as national discount programs for everything from movie tickets to flowers, rental cars, phones and vehicles! We also offer a 401(k) retirement plan as well as incentive and recognition programs. Relocation opportunities may also be available!

SUMMARY: This position requires the ability to lead and advocate for multiple projects. Manages and coordinates priorities with the Engineering Manager, coordinates with team members and collaborates with customers. Follows projects through from inception to completion; coordinates all tasks using the appropriate personnel, reporting the status to the stakeholders, and leading for the cause. ESSENTIAL DUTIES AND RESPONSIBILITIES INCLUDE THE FOLLOWING: Design new products or make improvements to existing projects following Stage Gate Process Determine Manufacturing Costs and Requirements Ability to manage projects efficiently and timely. Evaluate New/Changes and seek feedback from the Internal and External Customers Review/Initiate Cost-Savings by following the Stage Gate Process Create/develop BOM's Collaborate with Production to create/develop Preliminary Routes and work instructions Creation/Editing of Specifications in collaboration with the Engineering team. Collaboration with Quality in identifying on the specification the critical characteristics/features that are essential to the function of the product. Collaboration with Quality and Production to ensure the Product Verification Testing performed within Production is aligned with the Market expectations of the Product function. Participate in custom order processing. QUALIFICATIONS/EXPERIENCE: 3+ years relevant experience required Solid knowledge on various engineering disciplines, procedures and policies is also required. ERP experience required Possess good project skills Good communication skills Strong decision-making skills is a must 3D CAD Skills, Autodesk Inventor experience a plus. EDUCATION: Bachelor's degree in Engineering or Associate degree in a related engineering field with applicable experience is required LANGUAGE SKILLS: Detailed understanding of engineering disciplines, procedures and policies which results in business development is required. MATHEMATICAL SKILLS: Candidate must have the ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. REASONING ABILITY: Candidate must have the ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exits. Candidate must also have the ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Lifting 25/lbs. or more may be required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT: Must be able to work with constant interruptions, also some lifting is required. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately quiet to loud

The Product Design Engineer will work to design, develop, and maintain screw-in hydraulic cartridge valves. The candidate will be the technical owner of various product lines based on technical expertise. The Design Engineer is challenged with being a key contributor to the continuous improvement of our cartridge valve technology product portfolio, both locally and globally. Duties/Responsibilities: * Responsible for all aspects of given product line(s) by developing and maintaining requirements of the design * Submit and carry out Engineering Change Notices (ECNs) effective and efficiently * Coordinate with manufacturing engineering and operations teams for: * Design for Manufacturing, Cost, Assembly * First Pass Yield (FPY) Improvements * Design custom cartridges for customer specific applications utilizing specialized software to create models and drawings of products * Work with customers, distributors, integrators, etc. to answer technical questions and specify appropriate cartridge utilization * Provide technical guidance and expertise on design related issues * Drive the project management of new applications from initial conception to final commissioning/in-field testing through to production release * Prepare and deliver presentations at reviews and meetings Required Skills/Abilities: * Hands-on capability to carry through the complete project from conception to final sign-off by the customer * Ability to understand complex mathematical relationships that underpin mechanical analysis * Ability to read and interpret blueprint documents * Ability to proficiently utilize CAD/3-D Modeling Software * Ability to coordinate and communicate tasks across a wide range of cross-functional teams * Extreme attention to detail Education and Experience: * B.S. degree in Mechanical Engineering or Mechatronics is highly preferred. * Experience in the use of simulation tools (e.g., FEA, CFD, 1-D, etc.) * Knowledge of screw-in cartridge, sub plate mounted and stackable mobile sectional valves, as well as a solid understanding of hydraulic components, circuits, and systems * Thorough understanding of materials, linear and nonlinear behavior of materials, fatigue, and corrosion * Understanding of GD&T standards and best practices * Understanding of 6 Sigma principles Physical Requirements: * Ability to sit for prolonged periods of time * Ability to lift to 35 pounds

Principal Mechanical Engineer to lead building system design of HVAC, Plumbing and Fire Protection systems. This is a leadership position to establish the mechanical team for a growing healthcare focused MEP firm with a quick path to equity. Job Description Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection. Required Qualifications: Bachelor's degree in mechanical engineering from an ABET-accredited program. 8+ years of related experience P.E. License Revit experience. Strong written and oral communication skills with both internal employees and external clients. Self motivated Preferred Qualifications: AHCA Experience Healthcare experience Additional Information All your information will be kept confidential according to EEO guidelines.

Principal Mechanical Engineer to lead building system design of HVAC, Plumbing and Fire Protection systems. This is a leadership position to establish the mechanical team for a growing healthcare focused MEP firm with a quick path to equity. Job Description Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection. Required Qualifications: Bachelor's degree in mechanical engineering from an ABET-accredited program. 8+ years of related experience P.E. License Revit experience. Strong written and oral communication skills with both internal employees and external clients. Self motivated Preferred Qualifications: AHCA Experience Healthcare experience Additional Information All your information will be kept confidential according to EEO guidelines.

Are you the 𝗕𝗲𝘀𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗕𝗲𝘀𝘁? An innovator? A problem solver? If so, CONMED has a great opportunity to join a talented team of experienced R&D Engineers. As a Mechanical Engineer II R&D, you will apply intensive and diversified knowledge of engineering principles and practices to a broad area of design assignments. While working under the general supervision of an engineering manager, you'll have significant freedom to drive projects independently. A degree of creativity and latitude is encouraged and expected. You should be familiar with a variety of mechanical engineering design principles and practices, as well as design controls for engineering changes. Duties & Responsibilities: Demonstrated mechanical design experience (CAD, tolerance stack ups, GD&T) Ability to plan, conduct and supervise engineering assignments involving several smaller or lower priority projects or one major project. Works with cross-functional teams and under minimal supervision of an engineer manager or supervisor; has some latitude for un-reviewed action. Writes and advise others of the testing requirements. Creates and check design specifications. Conducts root-cause investigation and recommend corrective action for design issues in existing products Effectively communicates relevant project information to superiors. Schedules work to meet completion dates and technical specifications. Translate or develop engineering specifications based on voice of the customer input. Consistently acknowledges and appreciates each team member's contributions. Motivates team to work together in the most efficient manner. Qualifications: Bachelor of Science degree in Mechanical Engineering. 2 years of experience in R&D engineering. Strongly Preferred: Prior medical device experience. Demonstrated mechanical design experience (CAD, tolerance stack ups, GD&T) Expected Travel 0-20% This position is not eligible for employer-visa sponsorship This job posting is anticipated to close on February 6, 2026. We may, however, extend this time period, in which case the posting will remain available on careers.conmed.com. Please submit your application as soon as possible as we will be reviewing applications on a rolling basis as we receive them. Benefits: CONMED offers a wide array of benefits to fit your unique needs. Visit our Benefits Page for more information. Competitive compensation Excellent healthcare including medical, dental, vision and prescription coverage Short & long term disability plus life insurance -- cost paid fully by CONMED Retirement Savings Plan (401K) -- CONMED matches your contributions dollar for dollar, with the potential for up to 7% per pay period Employee Stock Purchase Plan -- allows stock purchases at discounted price Tuition assistance for undergraduate and graduate level courses Know someone at CONMED? Have them submit you as a referral before applying for this position to be eligible for our Employee Referral Program incentives! CONMED is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. The Know Your Rights: Workplace Discrimination is Illegal Poster reaffirms this commitment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. If you feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact us at ************ option #5.