Mechanical design engineer jobs in Tulsa, OK - 237 jobs

Our client is one of the world leaders in innovative design of High Performance Air Cooled Heat Exchangers (ACHE) servicing the Power Generation, Data Center, Renewable Energy, and Oil and Gas Markets on a global scale. As a Designer, you will be responsible for creating 3D CAD models and piece part drawings using Inventor. Key Responsibilities: Be able to create complete solid models with pre-assigned part numbers; The designer will try to utilize existing parts but if they do not exist, a new part number will need to be created. Pride with modeling accuracy and drawing detailing is critical. This includes proper mating, constraints, and modeling consistency. Communicate realistic due dates for project completion. Complete 3D model with all parts pre-assigned and fully detailed in case the project needs to be reassigned. Prepare approval drawings in a standardized format for the customer's review. Prepare piece part drawings of the entire assembly after project approval. Prepare accurate Bill of Materials (BOM) for the project both on the drawings and in EPR system. Complete release sheets so projects can be released to the shop. Correct errors when requested. Other duties as assigned. Education and Experience: Associate's degree in Drafting or equivalent combination of experience and education. 5+ years drafting/design experience. Previous experience with Inventor preferred. Previous experience with Heat Exchangers preferred. Strong understanding of mechanical principles, manufacturing processes, and materials science. Ability to manage multiple projects and work effectively in a fast-paced environment. Excellent communication and teamwork skills. Work Environment: This job is based in a manufacturing environment with a combination of office and plant floor responsibilities. This role uses standard office equipment. When in the manufacturing facility, all employees are required to wear personal protective equipment to include/hearing protection, and safety glasses with side shields, and OSHA compliant safety boots/shoes. Physical Demands: While performing duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Benefits: Generous benefits package including comprehensive health, dental, vision, 401(k) retirement plan with company match, a generous paid time off schedule, and professional development opportunities. Position Type/ Expected Hours of Work: This is a full-time exempt position. Days and hours of work are Monday through Friday, 7:00 a.m. to 4:00 p.m. Occasional evening and weekend work may be required.

Senior Mechanical Engineer Metric Geo are partnered with a fast growing contractor who are looking for a Senior Mechanical Engineer with expertise in facility mechanical systems for industrial and manufacturing projects. This role leads design efforts, mentors junior engineers, and ensures projects are delivered on time, on budget, and to code. What You'll Do: Lead design of HVAC, plumbing, utilities, steam, compressed air, chilled water, and process piping systems Produce 2D AutoCAD drawings and 3D Revit models Mentor and guide mechanical engineers on the team Conduct site evaluations and gather field data Collaborate with clients, vendors, and internal teams Ensure compliance with ASME, ASHRAE, OSHA, and other relevant standards What You Bring: PE in Mechanical Engineering, B.S. required 10-20 years of mechanical system design experience in industrial or manufacturing facilities Strong knowledge of codes, standards, and facility mechanical systems Excellent leadership, communication, and project management skills Benefits: Competitive salary, sign-on bonus, health/vision/dental, 401(k) with match, PTO, and relocation assistance If you're a seasoned mechanical engineer ready to lead design projects and mentor a team, we want to hear from you.

📍 Tulsa, OK | Full-Time | Monday-Friday, 7:00 a.m.-4:00 p.m. | On-Site Eligible candidates must be legally authorized to work in the U.S. and not require current or future sponsorship. 💲 Pay & Benefits 💵 Compensation: $95,000-$150,000 (based on experience) 🩺 Health & Wellness: Medical, dental, and vision insurance 🏦 Retirement Planning: 401(k) with company match 🏖️ Time Away: Generous paid time off, personal days, and holidays 💡 Additional Support: Employee Assistance Program (EAP) 🛡️ Coverage: Life and disability insurance 🚀 Career Growth: Professional development in a stable, growth-focused organization About The Role We're seeking a technically strong Project Engineer to support the execution of engineered-to-order industrial cooling equipment. This role is ideal for an engineer who enjoys owning projects end-to-end, working directly with customers, and serving as the technical bridge between engineering, manufacturing, and operations. You'll take responsibility for projects once they transition from the sales/application phase and remain accountable through design validation, fabrication support, and shipment. Key Responsibilities Project Ownership Assume responsibility for projects at internal handoff and manage them through completion and delivery Serve as the primary technical point of contact for customers throughout the project lifecycle Lead project kickoff meetings and align internal teams on scope, schedule, and requirements Engineering Coordination Translate customer requirements into complete engineering packages for design and manufacturing Review thermal, mechanical, and code-related calculations using internal and third-party tools Ensure engineering designs meet applicable specifications, quality standards, and regulatory requirements Design & Documentation Review and submit approval drawings to customers, incorporating feedback as needed Review manufacturing drawings prior to procurement and fabrication to ensure accuracy and build readiness Maintain clear, accurate project documentation across departments Execution & Communication Coordinate schedules with Planning, Purchasing, and Production to support on-time delivery Monitor project progress and proactively resolve technical or scheduling challenges Support final shipping coordination and documentation as required Project Leadership Provide technical guidance and oversight to project-related engineering resources Support workload coordination and execution quality within assigned projects Qualifications Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related discipline 5+ years of engineering experience in a manufacturing or industrial equipment environment Strong understanding of mechanical and thermal design principles Experience supporting engineered or custom-built industrial systems (heat transfer experience preferred) Proficiency interpreting technical drawings, specifications, and engineering calculations Comfortable working cross-functionally and communicating directly with customers Strong organizational skills with the ability to manage multiple active projects Work Environment This position is primarily office-based with regular interaction in a manufacturing facility. PPE is required when on the shop floor, including safety glasses, hearing protection, and safety footwear. The manufacturing environment includes typical fabrication conditions such as noise, dust, and temperature variation. Occasional lifting up to 25 lbs. may be required. Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

We are seeking an experienced Mechanical Design Engineer to join a growing team specializing in multi-axis robotic positioning systems. This role offers the opportunity to fully design complex mechanical systems from concept through installation, often integrated with six-axis industrial robots. The ideal candidate enjoys hands-on engineering, takes ownership of projects, and thrives in an environment where designs evolve and innovation is encouraged. This is a highly collaborative role with strong internal technical support, including access to experienced engineers and a licensed Professional Engineer. Strong communication skills and the ability to interact positively with customers are essential. Hours: 7:30am - 4:30pm Salary: $100,000 - $110,000 (DOE) Benefits include: 401(k) with company match Medical and dental insurance Annual bonus plan Travel: Required, as needed for installation and implementation support Key Responsibilities Design multi-axis mechanical positioning equipment for robotic automation systems Develop complete SolidWorks models, assemblies, drawings, and supporting documentation Apply practical knowledge of structural analysis, welding, machining, and mechanical assembly Manage engineering projects from concept through completion, including installation oversight when required Collaborate with internal engineering, manufacturing, and assembly teams Communicate effectively with customers to support design requirements and implementation Participate in troubleshooting and continuous improvement of existing designs Support integration of mechanical systems with industrial robots

Mechanical Engineer, Pressure Vessel - Full Time - Tulsa (OK), United States Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society. Are you someone who is passionate about working with cutting-edge technologies and revolutionizing the industry? If yes, then Sulzer Chemtech's Process Solutions division is where you should be! We are a team of innovative professionals who are committed to delivering excellence and guaranteed performance in the field of separation technologies. Our services are designed to cater to multiple industries like chemicals, pharmaceuticals, polymers, biofuels, or food and beverage. As part of our team, we depend on your entrepreneurial spirt to drive the development of process solutions, from conceptualization to plant reality. If you are looking to be part of a team that shapes the future of process solutions, then Sulzer Chemtech is the place for you. We are looking for a Mechanical Engineer, Pressure Vessel to join our CT_MTCS team in United States . Your main tasks and responsibilities: * Creation of equipment specifications and layout drawings according to internal and international applicable standards, customer specifications and contractual agreements. * Independent processing of process equipment and machine orders with support of purchasing, project management other specialized departments. * Independent creation of purchasing specifications and purchase requisitions. * Checking detailed documents created by external suppliers or customers. * Supporting the project management in the implementation of technical specifications, regulations, quality and deadlines. To succeed in this role, you will need: * Bachelor of Science in Mechanical Engineering * 3+ years mechanical engineering design of pressure vessels and rotating equipment design for applications in chemistry, pharma, or oil and gas industries. * Experience in using pressure vessel design code ASME VIII-Div 1. * Knowledge of AutoCAD or SolidWorks design software. * Analytical capability as required in performing calculations, reviewing, assessing and interpreting customer requirements and developing responsive design specifications and parameters. What we offer you: * An innovative, vibrant, and agile culture * Opportunities to develop as a professional and grow in areas of your interest from a world-class, progressive international company * A competitive salary and robust company bonus plan * 12 paid holidays plus additional PTO and company paid time off to volunteer * Comprehensive benefits program * Retirement plan matching with additional match benefits available after 1 year No visa or work permit support can be provided for this role Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in Brazil, China, Finland, Germany, Ireland, Switzerland, South Africa, the UK and the USA.

The Development Engineer will take ownership of the full technical product development cycle-from concept generation through product launch-while providing technical support to customers and manufacturing teams. Success in this role requires collaborative problem-solving, cross-functional teamwork, and a commitment to delivering robust, high-quality products that meet the toughest demands. Key Responsibilities: Research, design, and develop advanced assemblies and components. Lead engineering efforts from concept through product launch. Troubleshoot and sustain existing products to enhance performance and reliability. Collaborate with cross-functional teams, including manufacturing and customer support, to provide technical expertise and support project goals. Ensure all designs meet performance, quality, and durability standards for severe-duty applications. Supervisory Responsibilities: None Duties/Responsibilities: Product and Technology Innovation: Execute R&D activities to identify new technologies, materials, and design techniques that can be used to develop innovative new products for the oil and gas industry. Tasks include research, ideation and concept development, prototype development and testing, data analysis, and final product development. Product Improvement: Continuous improvement of existing product designs and specifications to enhance performance, quality, and reliability. Failure Analysis: Coordinate product failure analysis and develop solutions to improve product performance and prevent future issues. Production Support: Address and resolve production-related issues with current product lines to support efficient and effective manufacturing processes. Cross-Functional Collaboration: Work closely with teams across the organization to clearly define engineering project and/or support requirements, allocate resources, and coordinate tasks required to deliver project objectives and deliverables on schedule and in budget. Customer Communication and Support: Communicate and collaborate with our customer base from field locations to the corporate office to understand their challenges, provide expert technical support, and world-class solutions that help them achieve success. Engage with customers in the field to gather VOC on new and existing product performance. Project Management: Manage projects from conception through to completion, ensuring they are delivered on time and within budget. Problem Solving Skills: Leverage expert technical skills to analyze product design, process, and application issues and deliver effective and efficient solutions. Documentation: Maintain detailed records of the design and development process, projects, and resulting products, including 2D drawings, 3D models, design and manufacturing specifications, test results, data analysis, product BOMs, and product manuals. Continuous Improvement: Stay informed of the latest trends and advancements in the engineering and product design sectors through ongoing education, organizational membership, and analysis of trade and professional journals. Required Skills/Abilities: Troubleshooting mechanical failures, problem solving, and root cause analysis. Ability to interface with staff at all levels in corresponding departments. Demonstrated effective communication with customers independently in both office and frac service field/site location settings. Proficiency in Microsoft Office (Word, Excel, Access), Autodesk Inventor, and SAP. 3D modeling, GD&T, and tolerance analysis. Must be able to travel 10% - 15% of the time within North America. Education and Experience: Bachelor's degree in Mechanical Engineering. 5+ years' experience in product development and engineering support. Additional plus experiences: pump design and application, oilfield pressure pumping, statistical analysis, and finite element analysis. Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 25 pounds at times.

The Mechanical Design Engineer will be responsible for mechanical engineering design and will create final construction drawings throughout the entire construction process. Accommodation Requests We are committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment. If reasonable accommodation is needed to participate in the job application or interview process, contact ************ or ********************** Essential Duties and Responsibilities Typical functions of the Mechanical Design Engineer's job include, but are not limited to: Produces engineering design elements consistent with project specifications. Produces design elements and troubleshoots flaws in accordance with the project hours, scope, and parameters. Produces engineering construction documents based on project specifics. Manages project timelines and related design activity communication between the design team and the client accurately and timely. Provides assistance in the preparation of proposals and engineering agreements. Provides project coordination with in-house and outside sources. Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes, and standards consistent with company quality standards. Accurately and consistently execute the QA/QC process. Produces accurate and complete engineering project specifications within project parameters. Provide timely billing of projects to the accounting department. Actively participates in post-design activities and represents the company in client meetings, through construction completion. Actively mentor junior engineers and designers. Follows established company policies and procedures. Engages actively with other company members to continuously strive to improve processes, create efficiencies, and reduce costs. Education, Experience, and Technical Skills Required Bachelor's in Mechanical Engineering, Mechanical Engineering Technology, or Architectural Engineering. Minimum 3 years in mechanical design engineering in the architecture, engineering, or construction industry Real ID or Passport or must obtain upon hire Proficiency in Microsoft Office suite, including Word, Excel, Outlook, and Teams Expert level proficiency in utilizing Revit to apply BIM Modeling knowledge to various architectural and engineering projects Sound knowledge of mechanical engineering fundamentals Excellent communicator, organizer, and engager Thrive in a fast-paced environment with changing demands and priorities Initiate and enjoy independent problem solving Successfully incorporate feedback and manage multiple points of view Demonstrate excellent language and written communication skills Preferred Engineer in Training (EIT Designation) Eligible and interested in pursuing a PE License Working Environment Most of this role is performed in a professional temperature-controlled office environment when not working from a home office, remotely, or onsite at a project location. Additionally, this role is required to attend site visits. During site visits, there may be exposure to a variety of environmental conditions, such as being outdoors, being in indoor non-temperature-controlled environments, and maneuvering into tight spaces to scan existing electrical power and lighting systems. During site visits, you will work long days (10-12 hours) to complete 3d scanning jobs at client locations. These are typically week-long trips and happen 3- 4x per calendar year. Physical Demands Sitting/Standing: This role is generally sedentary performing sitting work utilizing technological office equipment including a laptop, mouse, keyboard, computer monitors, telephones, scanners, copiers, and fax machines. Walking: This role requires the ability to move about inside the office to access technological equipment required for the role. During site visits, this role requires the ability to traverse various project sites and buildings that will have uneven surfaces. Stooping/Kneeling/Crouching/Crawling: This role may require stooping to reload printer trays with print paper. During site visits, this role requires the ability to stoop, kneel, crouch, and crawl to set up scanning devices that will scan an existing structures heating, ventilation, air-conditioning, and piping systems. Using Hands/Fingers: This role constantly operates technological office equipment such as laptop, mouse, keyboard, computer monitors, telephones, and scanners, copiers, and fax machines. Talking/Hearing: This role requires constant communication with others in the organization to exchange information, review information, and make decisions about information. Seeing: This role requires the ability to view existing building structures inside and out to determine where scanning devices should be placed to get the required scans for the project. Carrying/Lifting: This role requires the ability to lift up to 30lbs to transport technological office equipment to and from various workspaces. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Native American Hiring Preference Our parent company, Mno-Bmadsen, prefers to hire Pokagon citizens who are qualified and suitable for available positions. For purposes of this section, “qualified” means that the applicant meets the technical and experiential needs for employment; and “suitable” means that the candidate appears to be the best fit considering present circumstance and conditions. Targeted preference is in the following order: First, to qualified Pokagon Band citizens; and Second, to qualified spouses, and qualified custodial parents; and Third, to other qualified Native Americans; and Fourth, to all other qualified applicants Any determinations as to the applicability of the Pokagon hiring preference are at the discretion of each Company President. Reporting Branch: Buildings Services Reporting Entity: Steelhead Engineering Fair Labor Standards Act Status: Exempt Hours Per Week: 40 Reporting Status: Hybrid Reports To: Engineering Technical Manager Manages Others: No Overnight Travel: Up to 10% Annually Tags: #LI-Hybrid #LI-SM1

Dallas, TX; Fort Worth, TX; Kansas City, MO; North Kansas City, MO; Oklahoma City, OK; Overland Park, KS; Tulsa, OK ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Join Olsson's South Facilities Engineering and Design team and contribute to projects that matter-healthcare facilities, data centers, and commercial spaces. In this role, you'll apply your technical expertise to develop HVAC and plumbing system designs that meet code requirements, achieve energy performance goals, and support project-specific needs. This position is suited for an experienced designer who values collaboration and takes pride in delivering accurate, well-coordinated mechanical systems. Primary Responsibilities: + Prepare detailed mechanical system layouts, plans, and sections using Revit and other design tools. + Work closely with engineers to develop coordinated HVAC, plumbing, and specialty system designs. + Review and maintain accuracy of design drawings and construction documentation. + Contribute to drafting standards and best practices. + Support multidisciplinary coordination, clash detection, and project delivery timelines. + Mentor junior design staff and provide technical guidance. + Assist with documentation and submittals, including specifications. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Associate degree in Drafting, Design Technology, or a related field (preferred). + 6+ years of mechanical drafting or design experience, preferably in building systems. + Proficiency in Revit; experience with AutoCAD and other BIM tools is a plus. + Strong understanding of HVAC and plumbing systems in commercial, healthcare, or mission-critical buildings. + Detail-oriented with strong collaboration and communication skills. \#LI-DD1 **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

DirectHire Title: Custom Machine Design Engineer lll Company: Trinity Employment Specialists Salary Range: $119,691 - $140,679 / Annually Trinity Employment Specialists is seeking a Custom Machine Design Engineer to lead the design, procurement, and commissioning of custom machinery, including CNC winders and electrically, hydraulically, or mechanically driven systems. Responsibilities include full lifecycle design, fabrication, installation, startup, and troubleshooting of specialized equipment. Proficiency in SolidWorks and AutoCAD is required for detailed fabrication drawings with precise tolerances and manufacturability. Experience with automation, PLC systems, hydraulics, and DFM-including motor sizing, gearbox and shaft sizing, and bearing selection-is highly desirable. Primary Duties & Responsibilities: Lead custom machine design projects, optimizing equipment performance and manufacturing processes. Collaborate with product design engineers to define specifications and manufacturing methods. Prototype new equipment or processes to support production. Translate performance requirements into detailed specifications for equipment and processes. Analyze and optimize layouts, industrial processes, and equipment placement. Recommend process and equipment improvements using current technologies and best practices. Collaborate with electrical engineers for automation integration. Design test equipment and procedures to evaluate product performance and reliability. Manage vendor relationships for component sourcing, fabrication, machining, and assembly. Prepare and approve technical packages, including drawings, BOMs, data sheets, specifications, and calculations. Estimate costs, prepare bids, and manage budgets and schedules to ensure on-time, on-budget project delivery. Oversee installation, operation, maintenance, and repair of machines to meet specifications. Investigate operational issues, determine root causes, and recommend corrective actions. Read and interpret blueprints, technical drawings, schematics, and reports. Education & Experience: Bachelor's degree in Mechanical Engineering or related field required; Master's preferred. 5-10+ years of experience in custom equipment design, ideally in composite manufacturing. Full project or machine system ownership from concept to commissioning. Independent project execution with minimal supervision. Expertise in FEA, tolerance stack-ups, and material selection. Approves design and procurement decisions and reviews others' work. Proficient in AutoCAD and SolidWorks for fabrication drawings and BOMs. Experienced with shop fabrication, machining, hydraulics, automation, PLC systems, DFM, structural/thermal calculations, and tolerance analysis. Experience with composite, plastic, or sheet metal design preferred. Behavioral Competencies: Dependable and proactive in communication and work continuity. Applies logical, evidence-based problem-solving and sound judgment. Active listener who incorporates feedback to improve design outcomes. Demonstrates critical thinking and proposes technically justified improvements. Manages complex engineering problems with multiple constraints. Self-manages projects, resources, and timelines while leading technical aspects with minimal supervision. Technical Competencies: Read and interpret technical drawings, schematics, and reports. Strong mechanical aptitude and problem-solving skills. Proficient in 2D/3D CAD design with AutoCAD and SolidWorks. Experience with FEA, material selection, structural/thermal calculations, and tolerance analysis. Knowledge of shop fabrication, machining, hydraulics, automation, PLC systems, and DFM. Familiarity with composite/nonmetallic, plastic, or sheet metal product design. Other: Occasional evening, weekend, overnight, and international travel required. 130000.00

Designer/Drafter is primarily responsible for creating production drawings for natural gas line heaters, industrial direct contact water heaters, glycol dehydration units, and other products. This will include both fabrication and assembly detail drawings. Direction will be given from the Project Engineer to design a drawing package to meet the customers requirements for each job. In some cases, drawing will originate from standards and in others they will be based on previous designs. Responsibility to take engineering handoff package and with minimal instructions create a production handoff package for each project. Create general arrangement, fabrication and assembly for assign projects using both 3D, 2D CAD Create and maintain parts, their part numbers, descriptions and specifications. Manage Engineering change task wit the PLM and ERP systems Generate drawing packages for production and service of projects. Interface with engineering, production, and purchasing personnel for Engineering changes. Generate CNC files for the burn table using CAM software. Problem Solving, Adaptability, Accountability, Coachability Fulltime position Monday-Friday 8:00am-5:00pm Overtime as required. Have H.S. diploma or GED Technical Certificate or a AA Degree in drafting. 3-5 Years Exp. in drafting manufacturing, familiar with metal fab and welding procedures. APPLY IN PERSON WITH RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD BETWEEN 9AM-3:00PM AT: LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE. SUITE 105 TULSA, OK 74135

The mechanical drafter is responsible for engineering custom units for production release. Essential functions To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Maintain a safe and clean working environment by complying with procedures, rules, and regulations. Create necessary sheet metal drawings required for fabrication and assembly. Create dimensional and piping drawings for customers according to customer specifications. Send finished drawing to applications engineer for review. Determine components to be mounted on the base (compressor, chiller, condenser, etc.) for mounting location and design structural/sheet metal bases accordingly. Release sheet metal, base, and assembly drawings to production upon completion. Work with sales to understand needs and create solutions. Visit production-type areas where assistance in design questions or revisions needs a solution. Attend meetings when requested to collaborate in a team environment to find solutions for problems and opportunities. Work with all departments on obtaining information. Attend work as outlined in Employee Handbook and/or specified by your supervisor. Complete other tasks as directed by supervisor. Comply with government regulations, laws, company policies, and company procedures. Desired qualifications Education: High school diploma or General Education Degree (GED). Experience: At least 2 years prior experience in design and working with the AutoCAD program through work experience or higher education courses specific to designing. Skills: Ability to use Microsoft productivity software. Self-motivated. Effective oral and written communication skills. Multi-tasking abilities. Must have basic computer skills. Ability to read a tape measure down to 1/16 of an inch. Basic math skills are required and the employee must also have the ability to recognize basic angle measures (45°, 90°, 180°, 270°, 360°) along with recognizing and converting fraction & decimal equivalents. Certificates, licenses or training: On-site training. Extensive training in CAD programs (SolidWorks/AutoCAD, etc.) Interaction with others Answers to Director of Product Design. Must be able to accurately receive and understand instructions from supervisor to determine if further instruction is required before attempting to complete the task assigned. In constant communication with other departments (Sales, production, etc.). It is essential that the employee is able to work with all employees of the RAE team and shows a spirit of cooperation with others in the organization. working environment The job is conducted primarily in a climate-controlled office setting, with occasional exposure to the manufacturing environment including moving mechanical parts and vehicles. The noise level in the work environment is usually quiet to moderate. tools & equipment used Stapler Windows 7 AutoCAD SolidWorks Tape Measure Ruler Photocopier/Scanner/Fax Machine Microsoft Office (Word, Powerpoint, Excel, Sharepoint, Outlook, etc.) Telephone Safety Glasses (when required) Computer physical demands Physical Demands Lift/Carry Stand O Walk O Sit C Handling / Fingering F Reach Outward F Reach Above Shoulder O Climb O Crawl N Squat or Kneel O Bend O Twist O 10 lbs or less O 11-20 lbs O 21-50 lbs O 51-100 lbs N Over 100 lbs N Push/Pull 12 lbs or less O 13-25 lbs O 26-40 lbs N 41-100 lbs N +100 lbs N N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements: Vision - Near, Sense of Sound (Audible Voice), Ability to wear Personal Protective Equipment (PPE) (Safety Glasses) The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. RAE Corporation is an Equal Opportunity Employer EEO/AA M/F/V/D

Job DescriptionJob Title: Design Engineer - Structural A structural steel fabrication company is seeking a Design Engineer - Structural to support the engineering and design of steel structures used in electrical transmission and traffic applications. This role is responsible for completing structural engineering calculations, reviewing drawings, and ensuring all deliverables meet industry standards, project requirements, and internal quality expectations. Primary Responsibilities Participate in the development and maintenance of engineering standards. Design structural components for steel structures used in electrical power line and traffic intersection applications. Perform engineering calculations and structural analysis. Provide accurate inputs to design teams for fabrication drawings. Review structural drawings to ensure compliance with engineering and project requirements. Interpret contract documents, drawings, work orders, and customer specifications. Deliver engineering details that meet organizational and customer standards. Provide technical guidance for design reviews, investigation reports, and development of corporate standards and guidelines. Ensure engineering deliverables are completed according to project schedules. Participate in internal and external design reviews and offer technical support as needed. Qualifications Bachelor's Degree in Engineering, preferably Civil or Structural. 5+ years of experience in structural engineering and design. Professional Engineer (PE) certification. Familiarity with SolidWorks or similar 3D modeling software. Strong communication skills. Solid proficiency with computer systems and office software; regular use of computers and office equipment required. Strong organizational and planning skills. Schedule Monday: Friday 8am-5pm OT as needed Pay: $28-30/hr DOE Abundant Solutions5151 S Mingo RdSuite DTulsa OK 74146 Send resumes to ***********************

JOB TITLE: Design Engineer PAY RATE: $70/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Create solid 3D models in CATIA V5 for aerospace components Generate detailed drawing packages, layouts, and engineering documentation Perform model release activities ensuring accuracy, compliance, and configuration control Collaborate with Integrated Product Team (IPT) members to resolve design challenges Provide factory and production floor support during build and assembly Convert 2D drawings into 3D models for modernization and optimization initiatives Requirements: 10+ years of aerospace engineering experience (Boeing experience strongly preferred) Expertise in structural and mechanical design for aerospace systems Advanced proficiency with CATIA V5 Strong understanding of FAA regulations and aerospace industry standards Must be a U.S. Citizen (as defined by ITAR). Desired Skills: Experience with composite materials and advanced manufacturing techniques Familiarity with stress analysis / finite element modeling Background supporting design certification processes Engineering degree from an ABET-accredited program About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! Engineers - #Hotjobs

Reports To: Project Development Manager Located In: Tulsa, OK Cooperates With: Project Engineering, Project Management, Field Service, & Operations Brief Description: We are seeking a detail-oriented Product Development Engineer to join our cross-functional team. Our products include fully integrated mechanical, electrical, and chemical systems which reduce harmful emissions from stationary pollution sources. This role supports the planning and execution necessary to develop and validate new products for this market space. What You'll Do: Design prototypes, develop test plans, and validate new product offerings Assist with bench tests, field trials, product launches, and new product support activities Create flowcharts, diagrams, test reports, service bulletins, and other documentation as needed to support development, training, and troubleshooting efforts Create and maintain models and drawings of complex parts and assemblies Data analysis and synthesis of emissions control test results What Qualifies You: Bachelor's degree in Engineering or Engineering Technology 1-5 years of experience in a technical engineering role Experience writing technical documentation and presentations Self-motivated, organized, and detail-oriented Strong desire to learn, explore, solve problems, and troubleshoot Strong computer skills and excellent communication skills (both written and verbal) Able to travel < 25% What Sets You Apart: (Beneficial Knowledge or Experience) 3D modeling and 2D drawings (SolidWorks preferred) Project management, product management, or program management Sheet metal fabrication procedures such as cutting, forming, or welding Reciprocating internal combustion engine design, operation, or application Systems engineering, automation, mechatronics, or process controls Ladder Logic, Function Block, Structured Text, Python, MatLab, or LabView programming Emission control technologies design, operation, or application Chemistry or chemical process design, operation, or application What's In It for You: Competitive Salary 5% 401K Match $350 Annual Wellness Credit 15 Days Annual PTO 5 Days Annual Sick Leave Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations.

Your Opportunity: We are looking for highly motivated Engineering student to join our team as a Product Engineering Co-op from May-December 2026 in Tulsa, Oklahoma. Greenheck Group is a dynamic, multi-branded international commercial HVAC manufacturer. Our equipment is used worldwide in commercial, institutional, and industrial facilities, ranging from comfort ventilation to manufacturing processes. Our efficient products improve comfort, safety, and health of lives across the planet. Since 1947, we are deeply committed to helping you “Build Your Future,” through professional growth, challenging projects, and exciting opportunities to explore your career path. What You'll Be Doing: Assist with laboratory testing operations which include the setup, test, and data collection of various life cycle testing, refrigeration performance, and efficiency testing of Greenheck products. Assist engineering team with the startup and commissioning of the new lab and test facility on the Greenheck Tulsa campus. Interpret test data, write technical reports, and communicate results to engineering team. Help to create new product CAD drawings, 3D models and documentation needed for new product launches. Assist engineering with prototyping new product designs and providing feedback regarding designs. Participate in cost reduction and quality improvement projects. What You Should Have: Enrollment in a related bachelor's degree program (Manufacturing, Mechanical, Industrial, Electrical Engineering or similar degree) On track to graduate in the next 2 years or less. Ability to act and make decisions independently. CAD experience preferred (AutoDesk, Solid Works, Inventor). ASHRAE, FSAE, Baja, or related student organization participation is a plus. Hand and power tool experience. Knowledge of airflow systems, HVAC systems and electrical systems is a plus. Things You Should Know: Team members in our college programs: Network: You will interact and network within the intern & co-op group across the U.S. (over 50 total college students). Meet Our Executives: You will present your projects and experiences to our company leaders and executives at the end of your term. Get Exposure to Various Areas: You will participate in Fundamental Fridays - professional development sessions where you connect directly with our leaders. Make a Difference: You will have the opportunity to take part in company sponsored volunteering. Collaborate: You will be an important part of our team with opportunities to collaborate and partner within your team and across the company. Why You'll Love It Here: Our culture is built on growth, innovation, continuous learning, making a difference in our community, and the tremendous talent of our team members. Our college programs provide exposure to leadership, mentoring, and the tools to help you grow professionally. We are deeply committed to help build your future and pledge to provide you with the types of challenges and opportunities that will relate to your interests and personal development goals. Compensation and Benefits: Greenheck Group takes pride in providing competitive pay. The starting base pay range for this position is $23/hour - $27/hour and may vary based type of position and school seniority. Visa Sponsorship Information: We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to consider candidates who will require any type of immigration work sponsorship either now or in the future. This includes but is not limited to F1-OPT, F1-CPT, H-1B, TN, L-1, J-1, etc. SPECIAL NOTATION The preceding statements are intended to describe the general nature and level of work being performed by people in this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills. The Employer retains the right to change or assign other duties to this position. EEO STATEMENT We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. ACCOMMODATIONS REQUEST Greenheck Group complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. To request an accommodation for the application or interview process, please email **************** with your name, job title, posting number, and requested accommodation. RECRUITING FRAUD ALERT At Greenheck Group, your personal information and online safety are our top priorities. Our recruiters will only direct candidates to apply through our official career page at ************************************ We will never request payments, financial account details, or sensitive information such as Social Security numbers. If you're unsure about the legitimacy of a message, please contact **************** for verification. If you're looking for a place to grow while working with happy, enthusiastic, values-based people, you'll enjoy your career with us!

Join a team of industry professionals who value your skills and talents. At OGI Process Equipment, our goal is to hire talented and motivated people. We offer a friendly work environment with competitive wages and benefits. From engineers to welders, salespeople to sandblasters, OGI has some of the best talent in the industry. Check out our job openings, and we look forward to working with you. Summary/Objective The Designer/Drafter is primarily responsible for creating production drawings for natural gas line heaters, industrial direct contact water heaters, glycol dehydration units, and other products. This will include both fabrication and assembly detail drawings. Direction will be given from the Project Engineer to design a drawing package to meet the customers' requirements for each job. In some cases, drawings will originate from standards and in others they will be based on previous designs. It will be the designer/drafter's responsibility to take the engineering handoff package and with minimal instructions create a production handoff package for each project. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Create General Arrangement, Fabrication, and Assembly for assign Projects using both 3D and 2D CAD. Create and maintain parts, their part numbers, descriptions, and specifications. Manage Engineering Change tasks within the PLM & ERP systems. Generate drawing packages for production and service of projects. Interface with engineering, production, and purchasing personnel for Engineering Changes. Generate CNC files for the burn table using CAM software. OGI has determined this position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019. Competencies Commitment to safety Technical capacity High quality of work and thoroughness Communicate professionally with other employees. Problem solving skills. Adaptability, Accountability, Coachability Interpersonal skills and ability to work in an office environment. Supervisor Responsibility This position has no supervisory responsibilities. Work Environment This job primarily operates in a professional office environment. This role uses standard office equipment. Occasional trips to the manufacturing floor and warehouse for observation and research are also required. When in the manufacturing facility, all employees are required to wear personal protective equipment to include/hearing protection, and safety glasses with side shields. Protective toe boots are not required when an employee is in designated walkways in the plant. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing duties of this job, the person in this position frequently communicates with employees and must be able to exchange accurate information in these situations. The employee must constantly remain stationary for long periods of time, while operating a computer and other office machinery. This position needs to occasionally move about inside the office to access supply cabinets and operate office productivity machinery, such as a copy machine. The employee might occasionally lift or move objects up to 25 pounds. On occasion, may be required to visit the shop that is a non-temperature-controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Occasional hours over 40 may be required as job duties demand. Travel No travel is required for this position. Education and Experience High school diploma or equivalent (GED) Technical Certificate or an AA degree in drafting preferred. 3 to 5 years of experience in drafting for manufacturing. 1 to 2 years working knowledge of SOLIDWORKS preferred. Familiar with metal fabrication and welding procedures. Possession of strong personal organizational skills Excellent written and verbal communication skills Ability to work both independently and with a team on assigned tasks. Additional Eligibility Qualifications None required for this position. Work Authorization/Security Clearance None required for this position. AAP/EEO Statement OGI is an equal employment opportunity employer. OGI recognizes and embraces federal legislation on equal employment opportunity and is committed to providing a workplace free of discrimination. All applicants for employment and all employees will be afforded equal opportunity and treatment, regardless of age, race, religion, gender, national origin, disability status or other protected status. All employees are responsible for complying with all applicable Federal, State and Local Laws, rules, and regulations regarding non-discrimination practices. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! OGI is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Responsibilities * Work in a safe manner * Utilize NX CAD/CAM software to create process plans and NC programs for turbine engine and gas compressor components. * Create routing and BOM's in MRP system (Infor BAAN) * Develop and document manufacturing processes * Work with shop floor to improve programs and processes * Work with Manufacturing Engineering and Operations to implement new products * Design work holding for machining centers and lathes using NX CAD/CAM Software * Work with QA department to develop inspection plans for new parts * Facilitate disposition of non-conforming parts Desired Qualifications * Bachelor's Degree in technical discipline +5 years relevant experience or High school diploma (GED or equivalent) + 10 years of relevant experience * Solid modeling experience (NX preferred) * Experience with multi-axis NC programming using a solid model-based CAD/CAM system (NX preferred) * Experience supporting model-based definition parts * Ability to work hands on with shop floor * Ability to read/understand blueprints and GD&T * Demonstrate good problem solving, analytical thinking, and decision making * Experience designing fixtures with solid modeling CAD software (NX preferred) * Strong machining background * Ability to read and understand G-code programs * Strong work ethic * Must possess good interpersonal skills to work with key stake holders. * Works well with team and individually Software * Siemens NX * Vericut * Autocad * MS office Summary Pay Range: $87,456.00 - $131,184.00 This position does not offer a full time remote option. We will not provide relocation for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. This position requires working onsite five days a week. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: January 8, 2026 - January 22, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Designer / Drafter Pay: $21.00-$25.00/hour Shift: 1st Shift | 8:00 AM - 5:00 PM Safety Sensitive We are seeking an experienced Designer / Drafter to support the creation of production drawing packages for industrial and energy-related equipment. This Designer / Drafter role focuses on developing fabrication and assembly drawings for products such as natural gas line heaters, industrial water heaters, and glycol dehydration units, working closely with Project Engineering to meet customer and production requirements. What the Designer / Drafter Will Be Doing • Create General Arrangement, Fabrication, and Assembly drawings using 2D and 3D CAD • Develop production drawing packages from engineering handoff documents with minimal supervision • Maintain parts, part numbers, descriptions, and specifications • Manage Engineering Change tasks within PLM and ERP systems • Generate drawing packages for production and service • Interface with engineering, production, and purchasing teams for design changes • Generate CNC burn table files using CAM software • Support fabrication and assembly through accurate, production-ready documentation Required Qualifications for the Designer / Drafter • 3-5 years of drafting experience in a manufacturing environment • 1-2 years working knowledge of SOLIDWORKS preferred • Familiarity with metal fabrication and welding procedures • Strong organizational, documentation, and problem-solving skills • Ability to communicate professionally and work independently or as part of a team • High attention to detail and commitment to quality Work Environment & Physical Requirements • Primary work performed in a professional office environment • Occasional visits to the manufacturing floor and warehouse • Ability to remain seated for extended periods while working at a computer • Occasional lifting of objects up to 25 lbs • PPE required when in production areas (hearing protection and safety glasses) Education & Experience • High School Diploma or GED required • Technical Certificate or Associate Degree in Drafting preferred • Strong written and verbal communication skills This is an excellent opportunity for a skilled Designer / Drafter seeking steady first-shift hours and long-term growth in a manufacturing and engineering environment. Job Order # 123419 Stand-By Personnel | Skilled Division

801 N Xanthus Tulsa Oklahoma 74110-4949 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. Note: While this position is posted as a Design Engineer, we are open to considering candidates with varying levels of experience. Depending on qualifications, the final title may be adjusted to reflect the level of engineer. Location: Tulsa, OK, or Houston/Brenham, Texas A Brief Summary of This Position: This individual contributor role is responsible for the structural analysis and design of utility transmission and distribution structures fabricated by the Valmont Utility Division, Steel Group. The engineer will handle full design responsibilities for quotes and orders, and provide general support to drafting and sales. The role involves planning and managing design workflows to meet project milestones and collaborating with senior engineers to ensure customer specifications are met and designs are efficient and manufacturable. Essential Functions: Reports to the Engineering Manager/Supervisor; no direct or indirect reports Analyzes and designs steel utility structures (primarily transmission and distribution) using structural design software, including Finite Element Method (IMPAX) Balances safety, manufacturability, and cost-efficiency in all designs Interprets customer specifications, market needs, and sales input to develop compliant, practical solutions Prepares and communicates engineering data for quotes and orders, including weight estimates and cost-related details Supports Drafting team to ensure design accuracy and timely order processing Reviews engineering and shop drawings, and evaluates as-built products for alignment with design intent Coordinates workflow and project milestones to ensure on-time delivery Provides internal and external technical support, including to customers, consultants, and contractors Maintains effective communication through phone, email, and in-person interactions May provide guidance to drafters and junior design staff Participates in product and process improvement discussions to enhance team efficiency and morale Recommends and coordinates testing to confirm theoretical designs when necessary Ensures design compliance with Valmont, industry, and national codes and standards Handles both standard and complex structural modeling tasks with appropriate support Applies sound engineering judgment to projects with clearly defined objectives and variable challenges May require travel up to 10% Essential Qualifications: Bachelor's degree in Civil or Structural Engineering with 2-5+ years of relevant structural design experience preferred Engineer-in-Training (EIT) certification Proficiency in structural engineering principles and 3D CAD (AutoCAD) Strong communication and teamwork skills Preferred Qualifications: Master's degree in Civil or Structural Engineering 3-4 years of industry experience Professional Engineer (P.E.) license Experience designing steel monopoles or utility structures Familiarity with utility design loads and industry standards Prior project team experience #LI-JC1 #LI-Onsite Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.