Mechanical engineer jobs in Canton, MI - 1,450 jobs

The Engineering Manager will manage and oversee all current program activities for the plant as well as any upcoming launches. Structural / Mechanical Engineering Manager Responsibilities: Manages, motivates, and leads team of Engineers ensuring appropriate direction, training, and evaluation. Supervise and mentor the engineering staff, including supervisors, fabricators and installers by fostering positive employee relations and promoting a collaborative, high-performance work environment. Allocate resources and manage project timelines to meet operational goals. Responsible for new product launches. Manage end-to-end fabrication, installation and modernization projects. Coordinate with vendors, contractors, and internal teams for seamless execution. Collaborate with the Sales Manager to review completed projects and identify opportunities for improved quoting accuracy and design enhancements through the installation process. Manages exploration of new materials and processes in order to achieve the best quality, process, and reliability. Maintains documentation closely following necessary timeliness on specific projects. Leads the engineering team in continuous improvement initiatives resulting in cost-reductions and customer give backs. Responsible for understanding design and engineering requirements on development programs, and ensuring that engineering disciplines are followed. Define and manage fixed and capital budgets. Strong shop floor experience in mfg / mechanical / process engineering - shop floor level. Manage performance of direct reports. Follows safety regulations and enforces compliance with company safety rules and regulations. Education/Skills: Bachelor's Degree in Mechanical, Electrical, or Structural Engineering (Master's preferred). Strong knowledge of heavy equipment, load calculations, and structural integrity. Ability to handle multiple tasks effectively. Effectively and professionally communicate. Solid understanding of Continuous Improvement and Lean Manufacturing methodologies and proven track record of implementation. Strong interpersonal skills and decision making ability. Ability to motivate a team environment, help drive results, and delegate authority to subordinate personnel. Excellent communications skills. Ability to effectively communicate to a diverse audience (customers, suppliers, employees). Results oriented approach. Effective leadership, management and development of direct reports.

Our client has a full-time opening for a Senior Mechanical Engineer to join our Mechanical Engineering team. This position can be based in either our Farmington Hills, MI or Toledo-Maumee, OH office. The Senior Mechanical Engineer will provide technical leadership and project oversight on complex projects within the healthcare and higher education markets, with additional exposure to industrial and municipal projects. This role requires a self-motivated professional with strong leadership, planning, and communication skills who can serve as a trusted client partner while mentoring and developing junior staff. Desired Education Bachelor of Science degree in Mechanical Engineering from an ABET-accredited program. Desired Job Experience Minimum of 10 years of experience in the Architectural/Engineering (A/E) consulting business. Licensed Professional Engineer (PE). Demonstrated experience leading mechanical design efforts for healthcare or higher education projects; industrial or municipal experience a plus. Ability to lead and manage mechanical design teams through all phases of project delivery. Experience acting as a project manager or engineering lead, including managing budgets, schedules, and work assignments. Proven ability to serve as the primary client contact with strong communication and organizational skills. Experience pursuing new work, developing client relationships, preparing proposals, and participating in interviews. Proficiency with Revit Building Information Modeling software. Proficiency with Microsoft Office products. Demonstrated ability to mentor and support the development of junior staff. Strong coordination skills across architectural, structural, electrical, and civil disciplines.

Summary/Objective The Mechanical Designer position plans and designs the automotive assembly line equipment for “General Assembly Tooling”. Essential Functions Designs custom fixtures and complex tooling systems for general assembly Designs 2D and 3D models using NX Develop Bill of Materials (BOMs) for manufacturing processes Performs engineering assignments with clear and specified objectives and involves conventional types of plans and specifications Designing and implementing cost-effective equipment modifications Making sure a product can be made reliably and will perform consistently in specified operating environments Managing projects using engineering principles and techniques Planning and designing new production processes Producing details of specifications and outline designs Using research, analytical, conceptual, and planning skills, particularly mathematical modeling and computer-aided design Consider the implications of issues such as cost, safety and time constraints in your design. Support all quality systems requirements Minimum Education Requirements High School diploma or equivalent Minimum Experience Required 5-8 years of General Assembly Tooling design experience Other Requirements Skilled in Unigraphics NX. (Experience in ACAD 2D, ACAD 3D and inventor beneficial) Experienced in GM General Assembly Tooling specifications and Data Banking requirements preferred Experience must include background in detailing and layout design before release to the shop floor Willing to work in office and interface with shop floor as required Ability to perform assigned duties under frequent time pressures in an interruptive environment Knowledge of machines and tools Experience with customer interaction Good verbal and written communications skills Ability to conceptualize new designs then follow through to completion, specify fabrication materials, specify machining requirements and welding requirements Microsoft Office (Word, Excel, PowerPoint) Up to 5% of travel may be required

Looking for Product Engineer CAD Software/ CATIA, Siemens NX BIW or Body Closure Systems (doors, hoods, tailgates, etc.)

We are seeking an experience Mechanical Piping Designer. This role is critical to producing coordinated and constructable piping layouts, ensuring project accuracy, efficiency, and field installation success. Responsibilities: Develop and coordinate details mechanical piping modes and layouts using AutoCAD, Fabrication CADmep, and Revit Perform clash detection and system coordination using Navisworks Manage to ensure accuracy across disciplines Interpret engineering drawings, specifications, and design intent to produce fabrication-ready spool constructability Collaborate closely with lead details, project managers, engineers, and field personnel to ensure constructability Support BIM coordination meetings and contribute to design/field issue resolutions Maintain drawing accuracy, version control, and compliance with company detailing standards Requirements: Strong understanding of commercial HVAC, plumbing, and mechanical piping systems Proficiency in Navisworks Manage, Fabrication CADmep, AutoCAD, and Revit (required) Working knowledge of Bluebeam and Microsoft Office Suite Ability to interpret construction documents, equipment submittals, and engineering drawings Previous construction field or fabrication shop experience highly preferred Perks of the Trade Medical, Vision, Dental, Life Insurance Profit Sharing Program 401k Retirement Holiday Pay

Responsibilities: Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive Interior system Thorough knowledge of engineering design & development concepts of automotive Interior system Good Working experience as Design engineer in interior engineering Very good proficiency in CATIA V5. Prepare and execute design release in the 3DExperience PLM system. Experience in design and development of Floor Colsole, and Instrument panel, Ability to resolve design related issues in the manufacturing plant Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Interior assemblies. Knowledge and understanding of Tooling and manufacturing processes Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD.

About Us: Colasanti Companies is a leading Construction Manager and General Contractor, as well as a nationally recognized self-performing concrete contractor. We take pride in tackling some of the most complex and high-profile projects in the country, including luxury high-rise hotels, mixed-use developments, stadiums, universities, and municipal projects. Our culture is built on collaboration, accountability, and craftsmanship. We value people who take ownership, lead with integrity, and share our commitment to safety and quality. At Colasanti, you will join a family-owned company with four generations of experience, where your expertise will be recognized and your growth supported. About the Job: The Project Engineer will support the project team throughout the entire construction process, from pre-construction to closeout. Responsibilities include planning, developing, coordinating, and managing onsite construction activities for large projects. Responsibilities: Coordinate submittals and procurement, ensuring timely material arrival and communicating progress. Manage and record drawings, document control, and coordination with trades. Document site progress through photos and daily reports. Lead project documentation and reporting. Assist with payment application processing. Maintain and update project schedules. Attend and document project meetings. Manage RFIs and resolve issues promptly. Track cost issues with input from the Project Manager. Assist in change order management, including quantity take-offs and subcontractor quotes. Enforce project safety and quality assurance/quality control policies. Solve problems proactively, researching and gathering relevant data. Assist in closeout processes and punch list management. Participate in training and development opportunities. Complete additional tasks as assigned. Knowledge, Experience & Qualifications: 3-5 years of experience. Experience working within commercial general contracting. Eager to grow and excel within our company. Proficient in Microsoft Word, Excel, and related software. Basic knowledge of construction processes and project management principles. Strong verbal and written communication skills. Excellent time management skills. Ability to travel to project sites. OSHA 30, First Aid, and CPR certified. Bachelor's degree in Construction Management, Engineering, Architecture, or a related field. Job Type: Full-time Benefits: 401(k) 401(k) 6% Match 401(k) matching Cell phone reimbursement Dental insurance Fuel discount Health insurance Life insurance Opportunities for advancement Paid time off Vision insurance Experience: Project engineering: 3 years (Required) Construction site: 3 years (Required) License/Certification: OSHA 30 (Required) Ability to Commute: Ann Arbor, MI 48113 (Required) Ability to Relocate: Ann Arbor, MI 48113: Relocate before starting work (Required) Work Location: In person

Works independently and in support of Project Managers in designing and implementing Heating, Ventilation and Air Conditioning (HVAC) projects. Initiates project scope process, developing preliminary design, engineering schedules, cost estimates, and qualitative and quantitative risk assessments. Authorizes preliminary project scope reviews, scope definitions, and estimates. Chairs regular update meetings for leadership on scope, budget, engineering costs, schedules, and estimates for engineering design. Works with Facilities leadership and front-line employees to gain alignment and approval for designs. The Successful candidate will be responsible for executing multiple projects at the same time ranging from tens of thousands of dollars to less than ?5 million dollars. Key Accountabilities: Primary interface and liaison to resolve engineering design problems. Directs project scoping process, develops preliminary schedule (design engineering) and cost estimates, conducts qualitative and quantitative risk assessment. Works on a project team with proper skill sets for preliminary estimating, risk identification, and organizational planning. Authorizes and forwards preliminary project scope review, scope definition, and estimates to Project Manager. Ensures design schedule is on target and monitors engineering costs. Chairs all scope meetings and provides updates of design status. Works with Project Manager to submit and evaluate bid packages for projects. Proficient with HVAC controls design, engineering and application. Support Facilities Operations troubleshooting of HVAC system and controls issues for existing assets within the portfolio. Updates to HVAC and Building Automation System (BAS) standards. Minimum Education & Experience Requirements: Bachelor's degree in Mechanical Engineering and 10+ years of job-relevant experience. Preferred: Licensed Professional Engineer (P.E.) Working experience of BAS control system design, engineering and application. Experience with Building Information Modeling (BIM), Autodesk Construction Cloud (ACC) and/or Revit. Working experience of Niagra Tridium BAS. PMI/PMP (Project Management Institute) certificate. Other Requirements: Ability to apply project planning & implementation and/or continuous improvement principles (typically acquired through several years of experience in these areas) to affect tangible, positive outcomes. Competent in multitasking (i.e the ability to prioritize & manage multiple tasks, issues or projects that may include high visibility initiatives and require innovation, teamwork & planning). Ability to conduct organized, efficient meetings & manage the meeting process with optimal results. Flexibility & the ability to work with shifting priorities; embrace new/evolving responsibilities. Copes with multiple demands from superiors, and/or subordinates & peers in a positive and fair fashion; displays a calm demeanor under pressure. Initiates new ideas and approaches; challenges orthodox practices & approaches with reasonably sound alternatives. Broad understanding of building HVAC and control systems. Advanced analytical and project management skills. Consulting and influencing skills consistent with the ability to build relationships and influence parties; may include getting parties to embrace changing expectations and initiatives Additional Notes: Incumbents may engage in all or some combination of the activities/accountabilities and utilize a variety of the competencies cited in this description depending upon the organization and role to which they are assigned. This description is intended to describe the general nature and level of work performed by incumbents in this job. It is not intended as an all-inclusive list of accountabilities or responsibilities, nor is it intended to limit the rights of supervisors or management representatives to assign, direct and control the work of employees under their supervision.

About the Role: We are seeking a Mechanical Engineer with extensive experience in commercial building HVAC and control systems. The ideal candidate has a strong track record in designing, implementing, and optimizing HVAC systems for commercial environments, with less focus on automotive applications. You will play a key role in ensuring the efficiency, reliability, and sustainability of our building systems. Key Responsibilities: Design, analyze, and optimize HVAC systems for commercial buildings, ensuring compliance with industry standards and building codes. Develop and implement building control systems for energy efficiency, comfort, and system integration. Conduct performance evaluations, troubleshooting, and preventative maintenance planning for HVAC systems. Collaborate with architects, contractors, and other engineering disciplines to ensure seamless project execution. Prepare technical documentation, specifications, and reports for internal and client use. Mentor junior engineers and provide technical guidance on complex mechanical systems. Stay updated with emerging technologies and industry trends in commercial building systems. Qualifications: Bachelor's degree in Mechanical Engineering or related field (Master's preferred). Strong knowledge of HVAC design principles, building codes, and control systems. Proficiency with CAD software, energy modeling tools, and building automation systems. Excellent problem-solving, communication, and project management skills. Automotive industry experience is a plus but not the primary focus.

Title: Project Engineer Duration: 2 years of Contract Shift: Hybrid Works independently and in support of Project Managers in designing and implementing Heating, Ventilation and Air Conditioning (HVAC) projects. Initiates project scope process, developing preliminary design, engineering schedules, cost estimates, and qualitative and quantitative risk assessments. Authorizes preliminary project scope reviews, scope definitions, and estimates. Chairs regular update meetings for leadership on scope, budget, engineering costs, schedules, and estimates for engineering design. Works with Facilities leadership and front-line employees to gain alignment and approval for designs. The Successful candidate will be responsible for executing multiple projects at the same time ranging from tens of thousands of dollars to less than ?5 million dollars. Key Accountabilities • Primary interface and liaison to resolve engineering design problems. • Directs project scoping process, develops preliminary schedule (design engineering) and cost estimates, conducts qualitative and quantitative risk assessment. • Works on a project team with proper skill sets for preliminary estimating, risk identification, and organizational planning. • Authorizes and forwards preliminary project scope review, scope definition, and estimates to Project Manager. • Ensures design schedule is on target and monitors engineering costs. • Chairs all scope meetings and provides updates of design status. • Works with Project Manager to submit and evaluate bid packages for projects. • Proficient with HVAC controls design, engineering and application. • Support Facilities Operations troubleshooting of HVAC system and controls issues for existing assets within the portfolio. • Updates to HVAC and Building Automation System (Client) standards. Minimum Education & Experience Requirements • Bachelor's degree in mechanical engineering and 10+ years of job-relevant experience. Preferred · Licensed Professional Engineer (P.E.) · Working experience of Client control system design, engineering and application. · Experience with Building Information Modeling (BIM), Autodesk Construction Cloud (Client) and/or Revit. · Working experience of Niagra Tridium Client. · PMI/PMP (Project Management Institute) certificate. Other Requirements • Ability to apply project planning & implementation and/or continuous improvement principles (typically acquired through several years of experience in these areas) to affect tangible, positive outcomes. • Competent in multitasking (i.e the ability to prioritize & manage multiple tasks, issues or projects that may include high visibility initiatives and require innovation, teamwork & planning). • Ability to conduct organized, efficient meetings & manage the meeting process with optimal results. • Flexibility & the ability to work with shifting priorities; embrace new/evolving responsibilities. • Copes with multiple demands from superiors, and/or subordinates & peers in a positive and fair fashion; displays a calm demeanor under pressure. • Initiates new ideas and approaches; challenges orthodox practices & approaches with reasonably sound alternatives. • Broad understanding of building HVAC and control systems. • Advanced analytical and project management skills. • Consulting and influencing skills consistent with the ability to build relationships and influence parties; may include getting parties to embrace changing expectations and initiatives Incumbents may engage in all or some combination of the activities/accountabilities and utilize a variety of the competencies cited in this description depending upon the organization and role to which they are assigned. This description is intended to describe the general nature and level of work performed by incumbents in this job. It is not intended as an all-inclusive list of accountabilities or responsibilities, nor is it intended to limit the rights of supervisors or management representatives to assign, direct and control the work of employees under their supervision

Job description: A Senior Design Engineer leads and executes complex design projects, ensuring that products or systems meet technical specifications, quality standards, and customer requirements. This role involves advanced design and analysis, project management, mentorship of junior engineers, and collaboration with cross-functional teams. A Sr. Design Engineer will have the ability to work autonomously, with little guidance, but also collaborate with the team. The ability to conceptualize and design based on customer requirements and stand behind his/her design. Job responsibilities: Design advanced automation equipment using 3D software from concept through final design including 2D drawings for manufacture and build Plan the release of designs to ensure timely delivery and alignment with project timelines Verify equipment designs and identify opportunities for improvement to enhance functionality and efficiency Work with cross functional team to implement all controls requirements, simulation requirements, and safety requirements Perform engineering analysis to ensure design meets the requirement of the application Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Develop comprehensive plans for design timing, monitor progress, conduct thorough reviews, and provide effective solutions for any arising issues Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Provide cross-functional leadership to drive technical tasks to successful completion Create and execute test plans to evaluate system performance and address any issues encountered during testing Conduct root cause analysis (RCA) and problem-solving to resolve engineering and technical issues efficiently Ability to travel to customer site and troubleshoot and find solutions for assembly issues and process issues Ability to travel up to 25% Minimum Requirements: 5+ years of experience Bachelor's degree in mechanical engineering Extensive experience in mechanical design engineering, with a proven track record of successful projects and innovations Proficiency in CAD software such as SolidWorks, AutoCAD, or similar, with advanced skills in 3D modeling, assembly design, and drawing creation Strong understanding of mechanical engineering principles and design standards, with expertise in statics, dynamics, thermodynamics, and materials science

Job Title: Sr. Design Engineer Job description: A Senior Design Engineer leads and executes complex design projects, ensuring that products or systems meet technical specifications, quality standards, and customer requirements. This role involves advanced design and analysis, project management, mentorship of junior engineers, and collaboration with cross-functional teams. A Sr. Design Engineer will have the ability to work autonomously, with little guidance, but also collaborate with the team. The ability to conceptualize and design based on customer requirements and stand behind his/her design. Job responsibilities: Design advanced automation equipment using 3D software from concept through final design including 2D drawings for manufacture and build Plan the release of designs to ensure timely delivery and alignment with project timelines Verify equipment designs and identify opportunities for improvement to enhance functionality and efficiency Work with cross functional team to implement all controls requirements, simulation requirements, and safety requirements Perform engineering analysis to ensure design meets the requirement of the application Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Develop comprehensive plans for design timing, monitor progress, conduct thorough reviews, and provide effective solutions for any arising issues Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Provide cross-functional leadership to drive technical tasks to successful completion Create and execute test plans to evaluate system performance and address any issues encountered during testing Conduct root cause analysis (RCA) and problem-solving to resolve engineering and technical issues efficiently Ability to travel to customer site and troubleshoot and find solutions for assembly issues and process issues Ability to travel up to 25% Minimum Requirements: 10+ years of experience Bachelor's degree in mechanical engineering Extensive experience in mechanical design engineering, with a proven track record of successful projects and innovations Proficiency in CAD software such as SolidWorks, AutoCAD, or similar, with advanced skills in 3D modeling, assembly design, and drawing creation Strong understanding of mechanical engineering principles and design standards, with expertise in statics, dynamics, thermodynamics, and materials science Reports to : Vice President Global Engineering

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Starfish Computer Corporation's Managed Services Engineer (Level 3) is responsible for the on-going and continuous operation of our clients' Information technology environments.Highly trained and certified, the Engineer, Level 3, is an expert in infrastructure technologies including networking (switching, routing, command lines, dynamic / static routes), security, servers and domains, virtualization, data storage and recovery. The Engineer, Level 3, is assigned as the primary person to oversee and own all technical aspects of the assigned clients' environments and projects. They work in concert with Starfish Computer Corporation's internal Help Desk and technical resources (with dedicated Level 1 and Level 2 support), the client's own on-site support technicians (if any), and other Starfish team members to deliver managed services offerings and project executions to our clients that are “best in class”. Job Functions & Responsibilities: Install, configure, monitor, and maintain network equipment, including routers, switches, and firewalls, across multi-vendor environments (Cisco IOS and HPE Aruba). Design, implement, and manage IP addressing schemes, including subnetting and supernetting, to optimize network performance and security. Configure and manage VLANs to segment network traffic, enhance security, and improve network efficiency. Routing & Switching: Implement and troubleshoot both static and dynamic routing protocols (e.g., OSPF, BGP, EIGRP) to ensure efficient data flow and high availability. Troubleshooting & Resolution: Monitor network performance, identify issues, and troubleshoot complex network problems using various tools and techniques (e.g., packet captures, CLI tools). Manage, support, install and upgrade Microsoft servers in physical and virtual environments. Optimize the client's service offering including Microsoft platforms, IP networking, telephony platforms, storage and data protection and recovery, mobile devices, servers, laptops, desktops, virtualization. Coordinate efforts on behalf of assigned clients between themselves, client support teams and Starfish internal resources. Act as the lead technical resource for assigned managed services clients. Ensure that the client environment is comprehensively documented and keep Starfish internal management systems up-to-date. Create preventative maintenance plans with detailed instructions that Level 1 and Level 2 engineers can reliably execute - either remotely or at client site. Work directly with Level 1 and Level 2 engineers to identify and resolve potential or on-going problems. Recommend capacity and performance plans for assigned client environments. Evaluate and schedule appropriate response to scheduled or unscheduled outage notifications. Coordinate and manage upgrades or changes in the client's environment. Determine root cause analysis of service outages and complete or coordinate resolutions. Documents, tracks, and monitors all incoming service requests to completion Assists in the preparation of client and prospect proposals and project plans including timeframes, budget estimates (time) and project milestones Be the lead technical resource for the assigned clients' projects while maintaining a balance between the roles of project manager and technical advisor Ensures personally that all support tickets classified as P2 or P1 have been resolved Completes and closes out service orders within service ticket application General Requirements & Information: Working locations include a mix of the office (in-office work is required during on-boarding period), remote and client locations. This is a hybrid position once on-boarding activities have been completed. Full-time position Competitive salary and benefits package Ability to travel locally to various client locations Participate in an on-call support rotation (current rotation is once every eight (8) weeks) Technical Requirements, Skills & Experience: Two years of on-site client experience or MSP experience 5-7 years of experience in IT support, customer service, help desk, or call center operations working in a multi-customer environment In-depth knowledge of Cisco IOS and/or Aruba AOS/Aruba CX operating systems. Strong understanding of networking principles and protocols (TCP/IP, DNS, DHCP). Expertise in IP subnetting, supernetting, and VLAN configurations. Proficiency in configuring static routes and dynamic routing protocols. Active Directory, 0365, VMware and/or Hyper-V skills and integration experience Experience supporting MS Windows Server, MS Exchange and MS SQL Experience with Watchguard (preferred) or related firewalls Demonstrable experience with vendor management Working knowledge of infrastructure monitoring tools Creates and maintains network and system documentation Strong technical troubleshooting and communications skills Excellent client relationship management skills Cisco CNA or Cisco CCIE preferred, but not required. CompTIA A+, Network+, and Security+ preferred, but not required. MCITP, MCSE certification a plus 4-year degree or equivalent work experience

SSOE is looking to hire a Machine Designer that will play a pivotal role in conceptualizing, detailing, and refining machinery and material handling equipment for complex manufacturing and industrial projects. You will leverage Autodesk Inventor and AutoCAD to develop precise 3D models, fabrication weldment details, and 2D production drawings that comply with applicable standards. Working within multidisciplinary teams, you will collaborate closely with project managers, engineers, and other designers to ensure seamless integration of mechanical systems with process equipment and facility utilities. This role requires you to engage in thorough design reviews, scope change control processes, and risk assessments to uphold quality and safety protocols consistent with SSOE's project execution standards. Typical projects include the layout and design of automated equipment, such as material handling lines, robotic assembly stations, and custom machine tooling, often interfacing with ductwork and equipment utilities (compressed air, vacuum systems), as well as supporting process PFDs and PIDs to validate equipment fit within manufacturing process flows. You will participate in site visits to validate design intent and troubleshoot installation challenges during construction administration and startup phases. Your ability to interpret utility and process layouts and apply mechanical design calculations will be critical in mitigating downstream operational risks and ensuring manufacturability and maintainability of solutions delivered. AI and Innovation As part of our commitment to innovation, all team members will be trained on Microsoft Copilot and empowered to use it as a core tool in their everyday work. Responsibilities Lead the mechanical design and development of machinery and automated material handling equipment, applying AutoCAD and Autodesk Inventor for detailed 3D modeling and 2D fabrication drawings. Develop design packages for machinery, incorporating ductwork and support structures as specified. Collaborate with multidisciplinary teams to integrate machine design within overall facility layouts, referencing PIDs, PFDs, and utility schematics to ensure seamless system compatibility. Conduct thorough QA/QC documentation reviews to ensure deliverables meet SSOE quality standards and external code requirements prior to client submission. Participate in interdisciplinary design review sessions, incorporating feedback from project management, discipline leads, and client representatives to maintain alignment and manage scope changes. Conduct site walks to validate equipment installation, perform field inspections, and inform corrective action plans. Assist in the development of project-specific documentation including BOMs, equipment data sheets, and maintenance manuals. Utilize version control and change management protocols to track design revisions and maintain project records in compliance with company policies. Contribute to risk management by identifying potential design or operational hazards and suggesting mitigation strategies during design phases. Communicate effectively with cross-disciplinary teams, clients, and contractors through clear, concise technical reports, meeting presentations, and written correspondence. Maintain up-to-date knowledge of manufacturing technologies, automation trends, and emerging design tools relevant to machine design and material handling. Qualifications Minimum 7 years of mechanical design experience specializing in machine design and material handling equipment within the manufacturing or industrial sectors. Proficient in AutoCAD and Autodesk Inventor for 3D modeling, detail drawings, and fabrication documentation. Demonstrated expertise designing fabrication weldments and structural supports compliant with AWS D1.1 and ANSI machinery safety standards. Familiar with process and utility layouts, referencing PFDs, PIDs, and plant utility systems to coordinate machine interfaces effectively. Solid understanding of mechanical design calculations related to load analysis, stress, deflection, and weld integrity. Experience collaborating with project managers, discipline leads, engineers, and other designers in a multidisciplinary AEC/EPC environment. Strong verbal and written communication skills capable of producing technically rigorous documentation and effectively presenting complex concepts. Detail-oriented with a proven track record of meeting quality and safety standards under tight project schedules. Salary Range: $85,000 - $90,000/year depending on location, education, experience, and any certifications that are directly related to the position. Opportunity for ample rewards and generous bonus opportunities. Benefits include health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), opportunities for professional development and training, generous PTO & paid holidays. Preferred Qualifications (not required) Experience with SolidWorks as an alternative CAD platform. Familiarity with other design software such as Navisworks or Plant 3D software and its application in piping and equipment utilities design. Knowledge of fabrication and assembly processes, commissioning/startup support, and constructability reviews in industrial projects. Exposure to process piping design, including familiarity with ASME B31.3 code and equipment utility systems such as compressed air, chilled water, or vacuum. Prior involvement in mentoring junior designers or engineers, promoting best practices and continuous improvement. Strong cost and schedule awareness that contributes to value engineering and optimization efforts on projects. Why SSOE At SSOE, you will join an innovation-forward, mentorship-centric environment where integrated design disciplines converge to deliver complex industrial and manufacturing solutions. Our project teams drive continuous improvement through knowledge sharing, career development pathways, and a culture that values technical excellence alongside social responsibility. As a Machine Designer here, you will contribute to cutting-edge projects across multiple sectors while receiving expert coaching and opportunities for leadership growth-empowering you to build impactful career milestones and deliver engineered solutions that matter. #LI-Hybrid

Compensation: $90,000-$100,000 base salary (commensurate with experience and education) Bonus: Ample rewards and generous bonus opportunities We are seeking an experienced Senior Machine Designer to lead the detailed design and development of specialized machinery and material handling equipment for industrial and manufacturing clients. This role plays a critical part in delivering high-quality, constructible designs using AutoCAD and Autodesk Inventor, supporting projects across manufacturing, glass, and similar industrial sectors. This position offers long-term growth, technical leadership opportunities, and the chance to mentor junior designers while contributing to complex, multidisciplinary projects. Key Responsibilities Lead detailed mechanical design of machine and material handling equipment, including conveyors, lifts, feeders, and custom fabrication weldments. Develop and validate 3D CAD models and detailed 2D drawings using AutoCAD and Autodesk Inventor, ensuring dimensional accuracy and compliance with internal and client standards. Collaborate with process, controls, and structural engineers to integrate automation components, ductwork routing, and equipment foundations into cohesive design packages. Coordinate with project managers to manage design scope, milestones, release cycles, and revision control through formal change management processes. Conduct internal and client-facing design reviews, presenting technical solutions and incorporating feedback to improve constructability and performance. Prepare technical submittals, RFIs, and review vendor documentation to confirm compliance and manufacturability. Support procurement and fabrication teams with complete build packages, including BOMs, welding symbols, assembly instructions, and inspection checklists. Participate in site visits during installation and commissioning to verify design intent, resolve technical issues, and support safe startup activities. Maintain thorough project documentation, including calculations, revision logs, and correspondence for full traceability. Identify and resolve design conflicts or safety risks prior to fabrication to reduce downstream impacts. Drive continuous improvement initiatives, enhancing design workflows, CAD standards, and 3D modeling best practices. Mentor junior designers and interns, providing guidance in CAD proficiency, codes, and machine design fundamentals. Assist with labor and material estimating, project budgeting, and ongoing cost monitoring throughout the project lifecycle. Leverage CAD automation, scripting, and parametric tools to improve efficiency and design throughput. Required Qualifications Minimum 15 years of professional mechanical design experience, with a strong focus on machine design and material handling equipment for industrial or manufacturing environments. Advanced, demonstrable proficiency in AutoCAD and Autodesk Inventor for 3D modeling and detailed drafting. Strong knowledge of mechanical fabrication practices, welding standards (AWS D1.1), and structural steel specifications (ASTM A6). Experience integrating ductwork systems, automation components, and fabrication weldments into equipment designs. Excellent verbal and written communication skills, with the ability to convey complex technical information clearly. Proven experience working within quality assurance, quality control, and formal change management systems. Background working in cross-functional project teams through all phases-from concept and design through fabrication, installation, and startup. Preferred Qualifications Experience with SolidWorks as an alternative CAD platform. Strong constructability review experience and knowledge of field installation practices. Understanding of project cost estimating and schedule impacts related to machine design decisions. Demonstrated leadership or mentoring experience with junior designers or small technical teams. Exposure to parametric design, CAD automation, and advanced modeling techniques. Experience integrating industrial automation equipment and control system interfaces. Benefits Health, dental, and vision insurance Life insurance 401(k) retirement savings plan with company match Professional development and training opportunities Generous PTO and paid holidays Please send your resume to hmccormick@selectek.net for consideration.

SSOE is looking to hire a Senior Machine Designer to play a pivotal role in the detailed design and development of specialized machinery and material handling equipment essential to manufacturing and industrial clients. Utilizing advanced CAD tools such as AutoCAD and Autodesk Inventor, you will produce fully coordinated, fabrication-ready 3D models and detailed 2D construction drawings for automated equipment, that integrate mechanical components, structural weldments, and ductwork systems compliant with industry codes and fabrication standards. Your work will directly support multidisciplinary project teams, involving process engineers, controls/automation specialists, and structural designers, ensuring design congruence across disciplines. This position demands close engagement with project managers and discipline leads through defined review gates and change management workflows to maintain project quality, schedule, and risk mitigation, following quality assurance and control protocols aligned with company and project standards. AI and Innovation As part of our commitment to innovation, all team members will be trained on Microsoft Copilot and empowered to use it as a core tool in their everyday work. Responsibilities Lead detailed mechanical design activities for machine and material handling equipment, including, but not limited to conveyors, lifts, feeders, and customized fabrication weldments, supporting industrial manufacturing projects primarily within manufacturing, glass, and other similar sectors. Develop and validate 3D CAD models and detailed 2D drawings using AutoCAD and Autodesk Inventor, ensuring design accuracy, dimensional control, and adherence to company and client standards. Collaborate closely with process engineers, controls engineers, and structural designers to integrate automation components, ductwork routing, and equipment foundations into cohesive multidisciplinary design packages. Coordinate with project managers to manage design scope, milestones, release cycles, and revision control through formal change management boards and document control systems. Conduct comprehensive design reviews internally and with clients, providing clear technical presentations, clarifications, and incorporating feedback to optimize constructability and performance. Prepare and submit technical submittals, vendor requests for information (RFIs), and evaluate supplier documentation to validate component compliance and manufacturability. Support procurement and fabrication teams by developing clear build packages, including bill of materials, welding symbols, assembly instructions, and inspection checklists aligned with quality protocols. Participate in site visits during equipment installation and commissioning phases to verify field adherence to design intent, troubleshoot emergent technical issues, and support safe startup procedures. Maintain detailed project documentation, including design calculations, revisions logs, and correspondence, ensuring traceability and audit readiness. Apply rigorous attention to detail to identify and resolve potential design conflicts or safety hazards before fabrication, minimizing downstream risk. Engage in continuous process improvement initiatives to refine design workflows, implement efficiency gains through 3D modeling best practices, and embed constructability reviews early in the design lifecycle. Mentor and provide technical guidance to junior designers and interns, fostering skill development in CAD proficiency, industry codes, and equipment design fundamentals. Assist in estimating labor and material quantities to support project budgeting and scheduling efforts, maintaining cost-effectiveness without compromising quality or compliance. Ongoing monitoring of project budget/costs throughout the project. Utilize AutoCAD and Autodesk Inventor automation features and scripting to accelerate repetitive design tasks and improve overall design throughput. Qualifications Minimum 15 years' professional experience in mechanical design with specific expertise in machine design and material handling equipment for manufacturing or industrial facilities. Proficient, demonstrable advanced skills in AutoCAD and Autodesk Inventor for 3D modeling and detailed mechanical drafting. Thorough knowledge of mechanical fabrication, welding standards (AWS D1.1), and structural steel material specifications (ASTM A6) relevant to equipment manufacture. Experience integrating ductwork systems, designing automation components, and fabrication weldments into machine designs. Proven ability to communicate complex technical information clearly and effectively in verbal and written form with project teams, clients, and contractors. Demonstrated adherence to quality assurance/control protocols and change management procedures within EPC or design firm environments. Experience working in cross-functional teams involving project managers, discipline leads, and external stakeholders throughout all project phases from pre-design through construction administration and startup. Salary Range: $90,000 - $100,000/year depending on location, education, experience, and any certifications that are directly related to the position. Opportunity for ample rewards and generous bonus opportunities. Benefits include health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), opportunities for professional development and training, generous PTO & paid holidays. Preferred Qualifications (not required) Experience using SolidWorks as an alternative to Inventor will be considered. Background in constructability reviews and knowledge of field installation practices to optimize design for ease of fabrication and assembly. Understanding of project cost estimating and schedule impacts related to machine design changes. Leadership aptitude demonstrated through mentoring junior engineers or leading small technical teams. Exposure to advanced modeling techniques, including parametric design and CAD automation to improve productivity and reduce errors. Experience with industrial automation equipment integration and control system interfaces. Why SSOE At SSOE, you join a global leader renowned for delivering complex, multidisciplinary industrial and manufacturing projects with precision and agility. Our culture prioritizes innovation-forward thinking and mentorship-driven growth, empowering you to collaborate across integrated disciplines-architecture, MEP, process, structural, controls-and expand your technical breadth. We invest deeply in knowledge sharing, continuous improvement, and career path development, offering rich opportunities to influence large-scale, impactful industrial systems while advancing your expertise. Join a team where your technical contributions are valued, your development is prioritized, and your impact on safer, smarter facilities is real and lasting. #LI-Hybrid

We are seeking a highly skilled and innovative Battery Modeling Engineer to join our Innovation Team. The candidate will be responsible for developing and/or enhancing battery modeling tools and performing cell performance and ageing simulations in support of cell technology Innovation projects. Develop/enhance numerical tools to implement and couple the physical phenomena governing the performance (chemical, thermal, mechanical, and ageing) and safety (thermal runaway) of battery cells. Leverage ML/AI where applicable. Perform cell performance and ageing simulations in support of all the cell technology Innovation projects within the Battery Advanced Functional Design team, to evaluate the Key Performance Indicators (KPIs) of the disruptive technologies in cell electrochemistry for automotive applications. Assist with completion of Technology Readiness Level (TRL) evaluations on time, by providing pertinent virtual analysis results including pack performance metrics such as charge time and thermal system requirements. Help scout, analyze and assess promising technologies or concepts from various sources (press, media, scientific publications, conferences, direct contacts with suppliers, startups or academic partners). Contribute to mid - and long -term roadmaps for cell electrochemistry in accordance with the Expertise Network. Collaborate with other virtual engineering teams within the company that work on battery cell and pack performance evaluation. Collaborate with other supporting technical teams such as materials and processes, standards, purchasing, component and subsystem testing. To arbitrate decisions on relative perimeter and to escalate major gaps that require higher level arbitration. Requirements Engineering Degree in Materials, Electrical, Electrochemistry or related degree field. Experience in lithium -ion battery technologies and materials. 3+ years of experience in cell electrochemistry modeling. Proficient in numerical modeling using computational tools such as MATLAB, Simulink, COMSOL, and GT -AutoLion. Advanced used of Microsoft Office applications. Preferred Requirements: Master's or PhD in Materials Engineering or Electrochemistry. 5+ years of experience in cell electrochemistry modeling. Excellent interpersonal skills to work in a cross functional, multi -cultural, and global team environment. Experience to provide technical guidance and direction during supplier technical reviews.

We are seeking a Machine Designer in any of the following locations: Toledo OH, Columbus OH, Midland MI, Troy MI, or Portage, MI. A minimum of 7 years related experience is required. You will play a pivotal role in the detailed design and development of specialized machinery and material handling equipment essential to manufacturing and industrial clients using AutoCAD and Autodesk Inventor. Base salary is $85-$90K, relevant to experience, education and certifications. *Opportunity for ample rewards and generous bonus opportunities. Benefits include health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), opportunities for professional development and training, generous PTO & paid holidays* Job description: Lead the mechanical design and development of machinery and automated material handling equipment, applying AutoCAD and Autodesk Inventor for detailed 3D modeling and 2D fabrication drawings. Develop design packages for machinery, incorporating ductwork and support structures as specified. Collaborate with multidisciplinary teams to integrate machine design within overall facility layouts, referencing PIDs, PFDs, and utility schematics to ensure seamless system compatibility. Conduct thorough QA/QC documentation reviews to ensure deliverables meet quality standards and external code requirements prior to client submission. Participate in interdisciplinary design review sessions, incorporating feedback from project management, discipline leads, and client representatives to maintain alignment and manage scope changes. Conduct site walks to validate equipment installation, perform field inspections, and inform corrective action plans. Assist in the development of project-specific documentation including BOMs, equipment data sheets, and maintenance manuals. Utilize version control and change management protocols to track design revisions and maintain project records in compliance with company policies. Contribute to risk management by identifying potential design or operational hazards and suggesting mitigation strategies during design phases. Communicate effectively with cross-disciplinary teams, clients, and contractors through clear, concise technical reports, meeting presentations, and written correspondence. Maintain up-to-date knowledge of manufacturing technologies, automation trends, and emerging design tools relevant to machine design and material handling. Required: Minimum 7 years of mechanical design experience specializing in machine design and material handling equipment within the manufacturing or industrial sectors. Proficient in AutoCAD and Autodesk Inventor for 3D modeling, detail drawings, and fabrication documentation. Demonstrated expertise designing fabrication weldments and structural supports compliant with AWS D1.1 and ANSI machinery safety standards. Familiar with process and utility layouts, referencing PFDs, PIDs, and plant utility systems to coordinate machine interfaces effectively. Solid understanding of mechanical design calculations related to load analysis, stress, deflection, and weld integrity. Experience collaborating with project managers, discipline leads, engineers, and other designers in a multidisciplinary AEC/EPC environment. Strong verbal and written communication skills capable of producing technically rigorous documentation and effectively presenting complex concepts. Detail-oriented with a proven track record of meeting quality and safety standards under tight project schedules. Preferred: Experience with SolidWorks as an alternative CAD platform. Familiarity with other design software such as Navisworks or Plant 3D software and its application in piping and equipment utilities design. Knowledge of fabrication and assembly processes, commissioning/startup support, and constructability reviews in industrial projects. Exposure to process piping design, including familiarity with ASME B31.3 code and equipment utility systems such as compressed air, chilled water, or vacuum. Prior involvement in mentoring junior designers or engineers, promoting best practices and continuous improvement. Strong cost and schedule awareness that contributes to value engineering and optimization efforts on projects.