Mechanical engineer jobs in Cincinnati, OH

Immediate need for a talented PCB Design Engineer. This is a 11+ months contract opportunity with long-term potential and is located in Cincinnati, OH(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 25-94418 Pay Range: $55 - $58/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: Key skills; PCB, Design Validation, Embedded Systems Development and qualification of electromechanical components such as Switch assemblies, cable assemblies, PCBAs. Understand Measurement Systems analysis and understanding of establishing calibration requirements. Work with suppliers to meet established cost, quality, and performance requirements. Work with suppliers on component qualification activities and monitor the execution. Understand and conduct Design of Experiments, Process Stability / Control / Capability methods, etc. for process characterizations/mfg./equipment development Effective communication with suppliers on design requirements and process capability needs Position may require up to 30% travel both domestic and international. Board Bring-up Design review, DFMEA, DFM & Board Revision Low-level Embedded drivers development for on-board peripherals & Motor control Schematics & BOM updates for PCBAs Write Module test plan and execution Writing Engineering Studies for board level & device level testing Design Transfer Test Engineering scope: Writing Test Specs for ICT/ FCT Liaison technical discussions between supplier & design team and resolve stumbling blocks Design review of Hardware & fixture for Functional Testers ICT/ FCT Qualification and deployment on plant Our client is a leading IT Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

The Commissioning Engineer is a deployable member of the Engineering team responsible for system commissioning, acceptance testing, and end-user knowledge transfer. This role ensures that integrated AV, UC, and IT systems are tested, validated, and fully functional prior to project turnover. The Commissioning Engineer servs as an on-site technical leader and works closely with installation, project management, programming, and engineering teams to deliver systems that meet Pixel integration standards and project specifications. ROLES AND RESPONSIBILITIES: · Conduct pre-deployment system testing and validation, in-office, prior to installation. · Perform on-site commissioning and acceptance testing prior during final system verification. · Provide direction and technical leadership to installation personnel while on-site to ensure proper system functionality and adherence to company standards. · Conduct knowledge transfer sessions with client stakeholders and end users following acceptance testing. · Test and verify control system functionality and collaborate with programmers to debug and optimize performance. · Make minor control system and/or GUI modifications when necessary to align with project documentation and system performance goals. · Configure and tune DSP systems. · Perform network configuration to support AV-over-IP solutions. · Configure, test, and optimize digital video signal chains. · Deploy and configure unified communications systems (Microsoft Teams Rooms, Zoom Rooms, and Cisco Webex). · Validate and troubleshoot USB signal extension, connection, and operations. · Document commissioning and acceptance testing results and provide detailed feedback to engineering and programming teams. · Maintain professionalism and represent the company positively during client-facing engagements. SUCCESS FACTORS: · Ability to Travel Nationwide · A high level of customer centricity · Strong team player with the ability to adapt to diverse team members · Ability to perform in a fast paced/high volume environment · Excellent verbal and written communication skills · Exceptional Critical Thinking skills · Detail Oriented- a high level of attention to detail is required · A high level of time management, accountability, and prioritization skills · Self-motivated, goal-oriented, and driven to accomplish department goals · Ability to be organized, problem solve, and be solution oriented · Proficient in Microsoft Office (Word, Excel, Outlook, Power Point) WORK ENVIRONMENT: · Must be able to work in a variety of physical positions, including climbing, sitting, standing, walking, and driving · When working on site, could be required to wear common protection of safety equipment, such as safety glasses, gloves, hearing protection and hard hats EXPERIENCE AND EDUCATION: · 3-5 years of experience in AV integration, service, or commissioning. *Programming or Engineering experience is a plus* · Hands-on experience with Crestron, Q-SYS, or Extron control systems · Hand-on experience with Q-SYS, Biamp, or Shure DSP platform configuration and tuning · Demonstrated understanding of AV-over-IP and network-based media transport technologies and protocols · Real world experience configuring and deploying UC ecosystems such as Microsoft Teams, Zoom, and Webex · Strong troubleshooting and system-level problem-solving skills · CTS certification, or ability to quickly obtain Pixel Technologies is an equal opportunity employer. All candidates agree to complete a selection assessment and pre-employment drug screen.

A nationally recognized architectural and engineering consultancy is looking to add a technically sharp and forward-thinking Project Design Engineer - Structural to their team. With offices in key markets and a reputation for innovation and quality, this firm is known for tackling projects that span commercial, civic, and institutional sectors. You're being invited to join a dynamic team where your skills in structural design will be valued, and you'll have plenty of chances to learn and grow alongside talented colleagues in a supportive atmosphere. What You'll Do: Contribute to the design and documentation of building structures using steel, concrete, timber, and hybrid systems. You'll play a key role in ensuring structural elements meet regulatory standards and are thoroughly analyzed for both new construction and renovation initiatives. Work closely with project managers on design intent, deliverables, and timelines. Collaborate with architects, MEP engineers, and other stakeholders to align structural solutions with project goals. Participate in quality checks, internal reviews, and technical coordination across project milestones. Help assess design challenges and offer technical input to guide project direction efficiently. Qualifications: A background in civil or structural engineering with a bachelor's degree is required, and having a postgraduate degree would be a significant advantage. A strong background in structural engineering and building design is expected, with familiarity with a variety of materials and systems. EIT with active progress toward PE/SE licensure, or currently licensed as a PE/SE. Familiarity with relevant building codes and experience using structural modeling tools. Team-first mindset with a track record of positive collaboration and quality execution. Why Join This Firm? Work on impactful projects that are shaping skylines and communities nationwide. Mentorship from experienced professionals and a budgeted path for continuing education. Strong internal culture that promotes autonomy, creativity, and career progression. Benefits include: Comprehensive health, dental, and vision plans 401(k) with match Paid time off and company holidays Annual bonus potential Student loan repayment options Certification/licensure reimbursement Flexible schedules and work/life balance support If you're ready to grow your technical capabilities while making a lasting impact through structural design, this role offers a compelling path forward. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

What You'll Do As a Design Engineer, you will support the account management team throughout the pre-sales process. You will be responsible for delivering complete system designs and associated documentation. This will include the Scope of Work, Bill of Materials, Labor Estimates, and High-Level System Sketches in accordance with company and departmental standards. You will also act as the technical subject matter expert for the account managers, and other departments as needed. Day-to-Day Responsibilities · Develop system designs based on customer requirements and needs analysis · Develop proposal documentation package (SOW, BOM, Sketches, etc.) for account management · Attend calls and/or site visits as technical subject matter expert with account manger · Review pre-construction site design and architectural documentation · Identify logistical requirements or challenges with executing proposed system design · Develop design documentation for custom hardware · Provide advanced engineering support to project delivery teams as required · Attend manufacturer and industry training to remain up to date on technologies, trends, and design requirements What We Are Looking For Must-Haves · Minimum two (2) years of demonstrated AV/IT system design experience · AVIXA CTS certification · Demonstrated IP network design/architecture experience · Enterprise Video Teleconference and Unified Communications design experience · First-hand experience configuring, programming, and supporting audio, video, and control systems · Ability to work and think independently to meet deadlines and delivery requirements · Strong interpersonal communication skills · Business and technical writing skills · Proficiency with Microsoft Visio, AutoCAD, Revit, and Bluebeam Nice-to-Haves · Formal education in electronics or related fields preferred · AVIXA CTS-D and/or BICSI RCDD certifications · Manufacturer audio, video, and control system certifications

Job Title: Manufacturing Engineer Terms: 6-month contract (possible extension) Schedule: Sat-Wed, 7:00 AM-4:30 PM EST (flexible with advance notice) Pay Rate: $40-$50/hr (Without benefits) Top Skills Needed: AutoCAD (2024), CREO, or SolidWorks for visualization and design Process definition: time studies, work instructions, line execution improvements Engineering degree preferred (ME ideal; Supply/Industrial/other engineering also considered) Experience with line architecture & industrial processes Role Responsibilities: Support process design/layout, mechanical/manufacturing engineering, tooling, and safety Address daily and long-term manufacturing issues using PFMEA, Control Plans, 8D, SAP, etc. Contribute to new product development, cost estimates, design concepts, and process layouts Assist with tooling, fixtures, equipment design, and capital expenditure planning Improve processes, ergonomics, safety, and material handling Provide key on-floor support, drive problem resolution, and lead improvement projects Preferred Qualifications: Bachelor's degree in Engineering (ME/EE preferred) 3-5 years of relevant manufacturing experience Strong communication and project management skills

We're looking to hire a talented Lead Engineer I or a Process Engineer II with experience in oral solid dosage to help develop innovative treatments for chronic diseases. Apply today-this is your chance to make a real impact in healthcare! Relocation assistance is available! Pay: $95k-$115k for the Lead Engineer I $85k-$100k for the Process Engineer II Location: Wilmington County, Ohio Responsibilities: Support the scale-up and transfer of oral solid dosage formulations and processes to the production facility Design and recommend equipment purchases Troubleshoot and maintain manufacturing systems, processes, and equipment Identify and implement process and equipment improvements Develop and implement SOPs Author high-quality technical protocols/reports (engineering studies, summary reports, equipment specifications, change controls, and investigations) Requirements: Lead Engineer I: BS degree in Engineering or technical discipline 5+ years of OSD pharmaceutical experience Experience with OSD equipment procurement Knowledge of cGMP, OSHA, EPA and FDA facility requirements and regulations Knowledge of OSD operations, statistics, equipment design, process control, process scale-up, and equipment validations Experience in statistical analysis Process Engineer II: BS degree in Engineering or technical discipline 2-5 years of OSD pharmaceutical experience Experience with OSD equipment procurement Knowledge of cGMP, OSHA, EPA and FDA facility requirements and regulations Knowledge of OSD operations, statistics, equipment design, process control, process scale-up, and equipment validations Experience in statistical analysis We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!

Dayton, OH $75,000 - $85,000 28976 Our client is an established systems integrator in Dayton, OH and are currently looking for a talented Robotics Engineer. This is a full-time/direct hire opening offering a great base salary with full benefits. You will have the opportunity to work for one of the largest equipment suppliers in the U.S. and you will join an experienced and proven team of engineers and technical professionals. Position Summary This role involves designing robotic machine controls from concept through installation at the customer's facility. The engineer will support system assembly, answer technical questions, program all system functions, and assist with onsite startup. Ideal Candidate Organized, self-driven, customer-focused, able to travel across North America, and an excellent communicator. Key DutiesDevelop industrial robot programs (FANUC required) Create clean-sheet and offline programs; debug and finalize code Perform I/O testing, including power, I/O, and safety circuits Troubleshoot network I/O, hydraulic, and pneumatic systems Prepare bills of materials and support purchasing Commission and start up robotic systems at customer sites Write operation manuals and document equipment risk assessments Required Qualifications3+ years of relevant experience Associate's degree or higher Robotic programming (FANUC; Motoman/ABB a plus) Ability to travel up to 25% in the U.S. Knowledge of industry safety standards and design practices Preferred QualificationsPLC/HMI experience (AB, Mitsubishi, Omron, Siemens) Experience with Cognex or FANUC iRVision Project management experience Please apply or send us a copy of your resume to ******************. All of your information will be kept confidential. Please feel free to call us at ************. Applications that fit the listed requirements will be contacted within 2-3 business days to schedule an initial phone interview with the Omni One team.

At least 5 year of React/Redux commercial experience (within last 2 years) 6+ years of strong Web-UI development experience (with demonstrable HTML, CSS, JavaScript technology usage) Excellent programming skills in JavaScript (ES 2015+) Experience using Git and npm in a collaborative environment Demonstrable knowledge of these concepts: Software Design Principles and Patterns Browsers (HTTP, APIs, event loop, render cycle, etc.) Build Tools (Webpack, Rollup, etc.) CI/CD (tools, pipelines, patterns) Automated Testing (unit, functional, contract, mocking, etc.) Application Performance Tuning (Lighthouse, browser dev tools, etc.) WAI-ARIA, WCAG, & assistive technology Progressive Web App (PWA) technologies BONUS SKILLS Functional programming in JavaScript WebAssembly (Wasm) Server-side development experience with Node.js or similar language/framework Jest/Mocha Webpack/Rollup Yarn Babel Webdriver IO GitLab Web UI framework experience (Angular, Vue, Stencil, Svelte, etc.) Web Components Flowtype/TypeScript NGINX Bash Scripting Cloud Platforms (Azure, GCP, Cloud Foundry) Docker Key Responsibilities Senior Web Lead Identify, uphold and apply Web engineering best practices Implement Web design principles to ensure our Web apps are performant, accessible, and provide the ideal user experience on devices of various sizes. Collaborate with designers, product managers, and team to iterate on design and implementation Assist in the development of applications & features that will be used by customers and internal associates Work with APIs and API teams to build and ship new experiences Review existing Web app code, new code and plan future app upgrades with the development teams Design and develop frameworks for creating Web apps that grow with the needs of the company Set Web app performance indicators and alarms. Monitor, actively improve, and respond to performance metrics Stay up-to-date and explore emerging technologies

Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems KODIAK Construction Recruiting & Staffing Cincinnati Metropolitan Area (On-site) Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems in Cincinnati, OH We're hiring a licensed Mechanical Engineer (PE) with deep expertise in hydronic systems-water and steam boilers, chilled water, and full HVAC system design-for complex industrial and commercial environments. This role owns the design, analysis, and stamping of mechanical systems while supporting project managers, sales, and field operations to deliver code-compliant, construction-ready solutions. Key Responsibilities Lead mechanical and hydronic system design for design-build projects. Review, seal, and approve permit-ready drawings (Ohio PE required). Provide engineering oversight and mentor junior designers. Ensure all designs meet IMC, IFGC, ASHRAE, and energy code requirements. Develop calculations and system models using Carrier HAP, AutoCAD, Revit, and Excel. Support QC reviews and participate in client-facing technical meetings. Apply engineering expertise in process steam, process piping, and process water systems for industrial and/or food-grade facilities. Qualifications Ohio PE License (required); KY/IN PE or ability to obtain within 12 months. 5+ years of mechanical/HVAC design experience with strong hydronics competency. Experience with industrial process systems; ammonia refrigeration experience is a plus. Proven commercial/industrial project background. Proficient in load calculation software and CAD/Revit platforms. Strong code knowledge and design best practices. What's In It for You Competitive compensation + 401(k) with company match Medical, dental, vision, life, disability Tuition reimbursement + PE license support Paid vacation, sick leave, and holidays National resources backed by local leadership Seniority Level Mid-Senior level Industry Construction HVAC and Refrigeration Equipment Manufacturing Employment Type Full-time Job Functions Engineering Skills Revit Mechanical Systems Computer-Aided Design (CAD) Industrial Engineering Hydronics Ammonia Refrigeration Commercial Projects Boilers Chilled Water HVAC

Senior Azure Cloud Engineer - Location: Hybrid onsite 2-3 days per week in Cincinnati, OH 45245 (Eastgate mall Batavia) - 6 Month Contract to Hire - Must be Green Card or US Citizen - Pay: $80-$90 per hr W-2 Conversion Salary ($150k - $160K) CBTS is searching for a Senior Azure-focused Cloud Engineer to design, deploy, and maintain the cloud infrastructure that supports these systems. This role ensures reliability, performance, scalability, security, and operational continuity across multiple applications, environments, and services. You will be responsible for building the underlying platform that allows engineering teams to deliver features quickly and securely-while enabling the ecosystem to scale. Responsibilities: Cloud Infrastructure & Architecture Design and implement Azure-based infrastructure for: APIs (Azure App Service) MAUI + Blazor application backends Databases (Azure SQL) Blob storage for media and timing data Azure Functions (event-driven workloads) Identity & Access Management (Azure AD / Managed Identity) API Management (APIM) Build secure, resilient, highly available cloud environments for production, staging, and development. DevOps & CI/CD Maintain GitHub Actions or Azure DevOps pipelines for: Automated builds Automated deployments Database migrations Artifact and container management Support infrastructure-as-code (IaC) using: Bicep ARM Terraform (optional) Security & Compliance Implement cloud security best practices: Azure Key Vault for secret management Role-based Access Control (RBAC) Network Security Groups and firewalls Managed Identities for services Zero-trust access flows Manage API throttling, DDoS protection, and monitoring alerts. Observability & Monitoring Implement monitoring and alerting with: Azure Monitor Application Insights Log Analytics Create diagnostic dashboards for: API health Latency Errors Throughput Live event traffic (race-day spikes) Performance & Scalability Tune SQL and App Service performance. Support auto-scaling rules for high-demand racing events. Optimize storage, cold/warm data tiers, and retention policies. Ensure low-latency real-time updates (SignalR-backed services). Operational Responsibilities Manage incident response and root cause analysis. Implement backup, restore, and disaster recovery procedures. Work with backend/frontend teams on deployment readiness. Enforce environment standards and configuration consistency. Maintain cloud documentation, runbooks, and architecture diagrams. Requirements Technical Skills 3-7+ years in cloud engineering, DevOps, or infrastructure roles. Strong experience with Azure services: App Service Azure SQL Storage Accounts (blobs/queues/tables) Azure Functions VNETs, networking, firewalls API Management Azure AD / Entra ID Key Vault Monitoring & Application Insights Experience with CI/CD: GitHub Actions or Azure DevOps Deployment slots Automated migrations Infrastructure-as-Code experience (Bicep/ARM/Terraform). Strong understanding of security, identity, and environment isolation. Nice to Have Experience supporting .NET/Blazor/MAUI app deployments. Familiarity with Clean Architecture and modular monolith patterns. Understanding of real-time systems (SignalR). Experience with containerization (Docker) and Azure Container Apps or AKS. Experience with Sports technology or IoT-like hardware integrations. SQL performance tuning experience. Soft Skills Strong communication and documentation skills. Ability to work cross-functionally with developers, designers, and leadership. Operates with high ownership and problem-solving initiative. Thrives in a fast-paced, evolving startup-style environment. CBTS provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws.

-Design life safety and asset protection systems using AutoCAD and proprietary software applications, adhering to local, national, and manufacturer requirements. -Direct contractors in the proper installation and operation of systems. -Survey job sites to ensure proper system design and installation. -Read, review, and implement customer-supplied project specifications. -Attend manufacturer training classes and other continued education training -Create project-specific operation and maintenance manuals. -Update existing drawings. -Assist office staff with engineering-related tasks such as process improvement. -Assist with system inspection and maintenance (if needed). -Assist in system startups and commissioning (if needed). Qualifications: -Previous experience in the Fire Protection Industry is required -Previous experience as a Design Engineer -Proficient knowledge of AutoCAD 2D drafting. -Knowledge and efficient use of 3D design software. -Understanding of MS Office applications. -Good organizational skills. -Ability to communicate technical information. -Desire to learn industry standards. -Willingness to study for and obtain NICET certification.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite** position with a competitive hourly pay rate and eligible for overtime pay. **This position will start May 2026 and go through Summer. Dates are flexible with school calendar.** Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Produce detailed layout and equipment details of HVAC systems, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements** : + Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), + Strong interest in Building Systems Mechanical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Produce detailed layout and equipment details of HVAC systems, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), Strong interest in Building Systems Mechanical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. #LI-RH1 #LI-Onsite

Roles & Responsibilities: Support the In-Service Operations of fleets of various Large, Medium, and Small Aero engines Development of repair solutions for structural and rotating parts of engines Support engine overhaul by providing repair solutions to salvage engine components In-Service Issue Analysis (Maintenance), Non-conformance Investigation & dispositions Technical Report writing and develop substantiation for the Airworthiness requirements Repair procedure Development & writing repair instructions/ preparation and modification of Repair & Inspection manuals to support in service fleet maintenance on Aero-Engine components Incorporation of Service Bulletin, Modification Bulletin, Design Alternation Request and Repair notes into the repair manuals Provide inputs supporting evaluation and improvement of processes, tools, and methodologies & ensure best practices are used throughout the company. Required Skills: BS or associate degree from an accredited university/college with a minimum of 1+ years of repair engineering experience Minimum one year of experience in repair engineering and/or technical writing on Gas turbines/Aero Engines components Good hands-on experience in using MS Office (Word, Excel, PowerPoint, and similar tools) Must have strong verbal and written communications skills, organization & trouble shooting skills Proven ability to work well within a team & collaborative environment with different engineering functions and manufacturing shops Desired Skills: Understanding of repair source approvals and vendor trial management Collaboration with other support functions- design, analysis, fleet, materials, sourcing, and shops to demonstrate repair processes are viable Ensure configuration management changes and spares requirements are accounted proactively with sourcing/suppliers Sound knowledge of gas turbine engines, engine components and their functions during engine operation Knowledge of various failure/ deterioration mechanisms leading to component/ system failures or distress Knowledge of various inspection methods including NDT techniques, various manufacturing techniques and their application during component repair Familiar with Gas Turbine Materials, Tooling, Protective Treatments, Coatings and Heat Treatments Knowledge of Gas Turbine fundamentals, component manufacturing, cleaning, and inspection processes Experience in NX, Teamcenter, part drawing reading, preparing repair sketches, and GD&T Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement. Substantial amounts of telephone and computer work. Heavily Regulated Industries with strict adherence to procedures. Flexibility to meet business deadlines by staying late or arriving early. Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM Ability to use personal transportation to visit customer locations. Due to the nature of the work, all candidates must be a U.S. Citizen or US Person The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Location: Cincinnati, OH Full compensation package is based on candidate experience and certifications Pay Ranges$68,000-$72,000 USD At Quest Defense Systems and Solutions, we don't just build technology - we engineer the future. From next-generation aerospace solutions to cutting-edge defense systems, we tackle the toughest, mission-critical challenges that keep people safe and push the boundaries of innovation. This is where problem-solvers, innovators, and visionary thinkers come together to shape the future. With over 25 years of aerospace and defense engineering expertise, our commitment to delivering high-quality, transformative solutions sets us apart - not just as an industry leader, but as a driving force for impactful change. Together, we're not just leading the industry - we're revolutionizing it. Quest Defense provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionSalary: tek Worx is the leading supplier of energy optimization solutions for chiller and boiler systems in industrial, institutional and commercial sites. Our growth and success has opened the opportunity for multiple Application Engineers to function as the lead technical representatives for these large scale HVAC projects. Responsibilities: Pre-sale data collection and site assessment including mechanical/operational and control system audits Develop project implementation plan and budget Field startup/commissioning to ensure system compliance with specifications Client field training on system operation, maintenance and troubleshooting Coordinate post-installation performance measurement/verification and support Qualifications: Experience in one of the following: Industrial and/or commercial HVAC: central plants, mechanical systems, or Mechanical/HVAC equipment: chillers, boilers, pumps, cooling towers, valves, or Control systems: building automation, PLC, instruments, VFDs, or related areas B.S. in Engineering or Associate degree in mechanical or electrical/electronic technology with 2 years related experience Ability to communicate technical material to a non-technical audience Strong interpersonal skills; able to work comfortably with customers, system integration partners and sub-customers Able to travel domestically up to 20% of the time (M-F only) tek Worx Culture & Benefits Opportunities for personal and professional growth Competitive salary and profit sharing Health insurance Employer-funded HSA account Education reimbursement 401(k) match Self-managed vacation policy Emphasis on work/life balance Open and cooperative work environment Ifyou are a self-motivated, collaborative and goal oriented individual seeking a position that guarantees a direct business impact, we encourage you to submit your resume. Please note, a drug/alcohol screen, background check and psychological profile examination are required for any successful candidates. Must be a US citizen or Green Card holder.

The Aerospace Engineer will work with the Installation Aerodynamics team to perform aerodynamic design and optimization of inlets, nacelles, and exhaust systems, as well as related aerodynamic components. In this role you will coordinate with internal and external stakeholders including airframers, global partners, leadership staff, and the broader installation aero team to provide aerodynamic performance assessments of aerodynamic engine components and commercial aviation propulsion systems. **Essential Responsibilities** As the Aerospace Engineer, you will: + Execute, with guidance from senior engineering resources, aerodynamic analysis, design, test, and integration functions required to define and support assigned components, assemblies, and systems that meet business standards and program / product requirements + Prepare and present technical information to internal and external customers + Perform computational fluid dynamics (CFD) analysis including geometry modification & meshing + Use, develop, and test in-house engineering tools to perform aerodynamic evaluations + Set up and execute test programs achieving test objectives within schedule and budget guidelines + Document and communicate aero design, analysis, and test data results + Share engineering information, lessons learned, and promote open dialogue + Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures **Qualifications/Requirements** + Bachelor of Science degree from an accredited university or college in Mechanical Engineering, Aerospace Engineering, or related discipline with a minimum of 2 years of relevant experience + Master of Science degree from an accredited university or college in Mechanical Engineering, Aerospace Engineering, or related discipline + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** + Experience in engine, nacelle, or aircraft aerodynamic design, CFD, or test support + Demonstrated passion for the aviation industry + Highly motivated and passionate with excellent communication skills + Proven teaming and collaboration capability _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

As a Frontend engineer, you will have the opportunity to design, build, test, maintain, and have a direct and meaningful effect on the digital platform and customer experience. We are committed to being an inclusive and transparent culture that cultivates the best software engineers who define the future of our digital platforms. REQUIRED SKILLS: At least 5 year of React/Redux commercial experience (within last 2 years) 6+ years of strong Web-UI development experience (with demonstrable HTML, CSS, JavaScript technology usage) Excellent programming skills in JavaScript (ES 2015+) Experience using Git and npm in a collaborative environment Demonstrable knowledge of these concepts: Software Design Principles and Patterns Browsers (HTTP, APIs, event loop, render cycle, etc.) Build Tools (Webpack, Rollup, etc.) CI/CD (tools, pipelines, patterns) Automated Testing (unit, functional, contract, mocking, etc.) Application Performance Tuning (Lighthouse, browser dev tools, etc.) WAI-ARIA, WCAG, & assistive technology Progressive Web App (PWA) technologies BONUS SKILLS: Functional programming in JavaScript WebAssembly (Wasm) Server-side development experience with Node.js or similar language/framework Jest/Mocha Webpack/Rollup Yarn Babel Webdriver IO GitLab Web UI framework experience (Angular, Vue, Stencil, Svelte, etc.) Web Components Flowtype/TypeScript NGINX Bash Scripting Cloud Platforms (Azure, GCP, Cloud Foundry) Docker Key Responsibilities: Senior Web Lead • Identify, uphold and apply Web engineering best practices • Implement Web design principles to ensure our Web apps are performant, accessible, and provide the ideal user experience on devices of various sizes. • Collaborate with designers, product managers, and team to iterate on design and implementation • Assist in the development of applications & features that will be used by customers and internal associates • Work with APIs and API teams to build and ship new experiences • Review existing Web app code, new code and plan future app upgrades with the development teams • Design and develop frameworks for creating Web apps that grow with the needs of the company • Set Web app performance indicators and alarms. Monitor, actively improve, and respond to performance metrics • Stay up-to-date and explore emerging technologies

The Aerospace Engineer will work with the Installation Aerodynamics team to perform aerodynamic design and optimization of inlets, nacelles, and exhaust systems, as well as related aerodynamic components. In this role you will coordinate with internal and external stakeholders including airframers, global partners, leadership staff, and the broader installation aero team to provide aerodynamic performance assessments of aerodynamic engine components and commercial aviation propulsion systems. Essential Responsibilities As the Aerospace Engineer, you will: * Execute, with guidance from senior engineering resources, aerodynamic analysis, design, test, and integration functions required to define and support assigned components, assemblies, and systems that meet business standards and program / product requirements * Prepare and present technical information to internal and external customers * Perform computational fluid dynamics (CFD) analysis including geometry modification & meshing * Use, develop, and test in-house engineering tools to perform aerodynamic evaluations * Set up and execute test programs achieving test objectives within schedule and budget guidelines * Document and communicate aero design, analysis, and test data results * Share engineering information, lessons learned, and promote open dialogue * Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures Qualifications/Requirements * Bachelor of Science degree from an accredited university or college in Mechanical Engineering, Aerospace Engineering, or related discipline with a minimum of 2 years of relevant experience * Master of Science degree from an accredited university or college in Mechanical Engineering, Aerospace Engineering, or related discipline * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics * Experience in engine, nacelle, or aircraft aerodynamic design, CFD, or test support * Demonstrated passion for the aviation industry * Highly motivated and passionate with excellent communication skills * Proven teaming and collaboration capability This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. **Job Description** Job Summary: Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op! You'll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life. Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity. You will gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems. Ultimately, you'll be placed taking your preferences into account while also considering your major, year of schooling, and business needs at the time of placement. Essential Responsibilities: An Aerospace Systems & Defense intern/co-op may experience work in the development of engine controls, navigation, & guidance systems; gas turbine engine components; electrical power systems; mechanical systems; vehicle health & data management systems; mission systems; computing systems; and platform systems integration. Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support. Qualifications/Requirements: + Minimum 3.0 cumulative GPA off a 4.0 scale without rounding. + Attending a full time matriculated and nationally accredited baccalaureate or graduate program in engineering (degrees accepted: Mechanical Engineering, Aeronautical/Aerospace Engineering). + Willingness and ability to work in the United States; primary locations are: Dayton, OH. + Reliable transportation, many of our sites do not have public transportation available. Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics: + A solid commitment to a career in technology and a passion for engineering + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with honesty, contributes constructively + Focused: quick learner, strategically prioritizes work, committed, and takes initiative + Leadership ability: strong communicator, decision-maker, and collaborative teamwork + Problem solver: analytical-minded, challenge existing processes, critical thinker + Strong knowledge of computer and Microsoft products + Proficiency in at least one programming language Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: _GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an_ Equal Opportunity Employer (******************************************************************************************************************************************************** _._ _Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.