Mechanical engineer jobs in Corvallis, OR - 115 jobs

All

Mechanical Engineer

Project Engineer

Manufacturing Engineer

Senior Mechanical Engineer

Facility Engineer

Mechanical Engineering Internship

Research And Development Engineer

Research Engineer

Sr. Mechanical Engineer
Aerovironment 4.6
Mechanical engineer job in Salem, OR
The Sr. Mechanical Engineer applies engineering techniques to design, install, modify, analyze, repair and test tools, engines, machines and other mechanically functioning equipment. Leads and supports the mechanical design, testing, and production of electrical machines as well as the design of electronics packaging for high altitude aerospace applications. Leads or supports mechanical packaging development effort for electronic equipment that withstand stringent environmental requirements (i.e., mass, volume, thermal, vibration). Manages mid-size development projects outsourced to sub-contractors (development of a system, equipment or components). Location: Hood River, OR Position Responsibilities + Leads or supports the thermal, structural, dynamic, and fluid flow analysis efforts for electronics equipment + Leads the testing and data collection in the laboratory and the field + Models the mechanical devices and selects the proper material + Performs stress and fatigue analysis; Performs thermal analysis and selects bonding material + Develops mechanical drawings and specifies the dimensional tolerances + Develops assembly instructions and test procedures + Develops test plans and test procedures to verify designs + Works on complex issues where analysis of situations or data requires an in-depth knowledge of variable factors + Executes team assignments effectively following the given schedule, milestone, and available resources. May coordinate activities of other personnel (Team Lead). + Other duties as assigned Basic Qualifications (Required Skills & Experience) + Minimum 8 - 12 years of relevant technical experience in Mechanical Engineering, of which a minimum of 5 years in developing for production rotating electrical machines, electronics equipment packaging solution, and/or mechanical devices solutions for industrial and aerospace applications + Experienced in developing requirements specification for mechanical subsystems and according to MIL-STD 961D standard or equivalent + Has sufficient proficiency with the following CAD /CAE tools to perform one's position responsibilities: + SolidWorks for mechanical modeling. + ANSYS for structural and fatigue analysis + ANSYS Icepack for thermal analysis. + Extensive experience with Solid Works and designing electrical rotating machines for high- performance applications + Extensive experience with thermal management tradeoffs and solutions and materials properties + Experienced with bonding techniques for extreme environmental conditions using different adhesives + Experienced with manufacturing methodologies of electrical machines + Experienced with creating and maintaining product document tree + Experienced with creating and maintaining products bill of materials (BOM) + Experienced with test and measurement techniques, such as torque transducer calibration and instrumentation Other Qualifications & Desired Competencies + MS degree in Mechanical Engineering is preferred + Recognition by a reputable international engineering society such as ASME at the senior membership level or higher is desired + Demonstrates familiarity with MIL-STD-810 or DO-160 + Demonstrates familiarity with MIL-STD 961D standards (or equivalent) for developing subsystem technical specifications + Demonstrates full understanding & knowledge of engineering principles in the technical discipline and successfully works independently + Effectively articulates concepts and ideas to both technical and non-technical staff + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills (Verbal and written) + Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands + Ability to work in an office and production environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $107,370 - $152,250 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************
$107.4k-152.3k yearly 60d+ ago

Looking for a job?

Let Zippia find it for you.

Engineer Intern - Mechanical
Sierra Pacific Industries 4.7
Mechanical engineer job in Eugene, OR
Wages range from $19.50 to $21.50 per hour Mechanical Engineering Interns will work directly with a team of experienced engineers to assist in the design and rebuilding of lumber manufacturing equipment. SPI is seeking motivated individuals who are interested in pursuing a career in mechanical engineering and machine design. Duties include, but are not limited to: * Assist full time engineers with drafting and seeing projects and sub assembly projects through the manufacturing process. * Take on small projects that involve designing or rebuilding wood products equipment. * Work and gain experience in a full on fabrication, machining, and tech shop. Qualifications * Currently in second or third year of engineering school, in or related to mechanical systems. * Completed coursework in a 3D modeling class or competent in Solidworks. * Possess strong multi-tasking and organizational skills. * Excellent verbal and written communication skills. * Understanding of basic welding and machining procedures. * Interested in machinery and mechanical systems. Base Location: Eugene, Oregon Compensation includes competitive hourly wage and housing allowance for qualifying individuals. How to Apply Apply online at: spi-ind.com/internships Applicants must provide a cover letter and resume when submitting application. Applications Close: February 16th 2026 Interviews will be ongoing as applications are received. Position may be filled prior to deadline. Employment Period: SUMMER 2026 (flexible start & end dates) Celebrate our 300th million seedling planted with us! spi-ind.com/OurForests/ThreeHundredMillion Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. What does it mean to be part of the Sierra Pacific family? It means you are a valued team member and part of a growing, fourth-generation family-owned, forest products company built on hard work, innovation, and wise investments. With around 6,500 crew members in over 30 states, Sierra Pacific offers many opportunities for personal and professional growth; from entry-level to skilled trades, from truck drivers to sales managers, from foresters to engineers - for everyone! We invite you to learn more about our history, our 2.4 million acres of forestlands, and our state-of-the-art wood product and window manufacturing facilities at ************************ As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We are also proud that all Sierra Pacific facilities follow our tobacco-free policy. Sierra Pacific adheres to E-verify to verify the social security number of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. If you are an individual with a disability and need accommodation to complete the application process, please call ************ or write to Sierra Pacific Industries at PO Box 496011, Redding, CA 96049.
$19.5-21.5 hourly 1d ago
Mechanical Engineer
Concept Systems Inc. 3.9
Mechanical engineer job in Albany, OR
Job Description Join our team! Our Mechanical Engineer is responsible for performing a wide range of complex mechanical engineering functions related to the design, testing and evaluation of mechanical and electro-mechanical systems. This individual will provide project solutions, estimates and designs on complex projects relative to budget, performance, and schedule. EDUCATION and/or EXPERIENCE Bachelor's degree (B. A. or B.S.) in Mechanical Engineering, Mechatronics, Electrical Engineering, Computer Science or related field from a four-year college or university. CERTIFICATES, LICENSES, REGISTRATIONS A valid insurable Driver's License is required A valid passport is preferred 15 - 20% travel required for this position Qualified applicants must be legally authorized for employment in the United States. Applicants cannot require employer sponsored work authorization now or in the future for employment in the United States. Concept Systems offers a full range of comprehensive benefits, including medical, dental, flexible spending, matching 401(k), generous paid time off programs, profit sharing, and company paid training - in addition to a professional and business casual environment. Concept Systems is an Equal Opportunity Employer JOB DUTIES ENGINEERING Interprets scope and project requirements and develops design alternatives. Works on complex assignments and exercises judgement and initiative to solve problems and make sound recommendations. Performs engineering calculations as required to support mechanical design work. Improves, develops and maintains engineering standards and criteria. PROJECT MANAGEMENT Monitors and maintains project schedule and budget. Understands and follows Concept's project methodology. Coordinates billing and review and approves invoices. SALES & MARKETING SUPPORT Supports and prepares proposal estimates and completes technical research in a timely manner. Provides technical content as requested at sales meetings. Writes project briefs for larger projects. CUSTOMER RELATIONS Maintains existing relationships. Develops and fosters new relationships. Provides prompt and courteous response to service and support issues. OTHER In-depth understanding of engineering concepts, principles and theories. Prioritizes and plans work activities and uses time efficiently. Exhibits a high level of professionalism and builds trust both within the organization and with customers. Strong technical writing abilities. Travels to support project and sales requirements Maintains punctual, regular and predictable attendance. Works collaboratively in a team environment with a spirit of cooperation. Displays excellent communication skills including presentation, persuasion, and negotiation skills required in working with customers and coworkers and including the ability to communicate effectively and remain calm and courteous under pressure. Respectfully takes direction from manager. SUPERVISORY RESPONSIBILITIES This position does not have any supervisory responsibilities. QUALIFICATIONS Ability to perform essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. COMPUTER SKILLS Job requires specialized computer skills. Must be adept at using various applications including database, spreadsheet, report writing, project management, graphics, word processing, presentation creation/editing, communicate by e-mail and use scheduling software on Microsoft systems and programs. Ability to generate system layout for proposal and projects in 2D drawings and 3D models. Ability to navigate automation/control system integration projects across a variety of industries and applications. Skills with SolidWorks or comparable 3D modeling software required. AutoCAD skills preferred. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to sit. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Project work in the shop and customer start-ups may require moderate physical demands. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and extreme heat (non-weather). The employee is occasionally exposed to wet or humid conditions (non-weather); work in high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold (non-weather) and vibration. The noise level in the work environment is usually moderate. The work environment may vary depending on start-up and customer site visit environments. Travel to customer sites is required for this position; 20-30% annually. Qualified applicants must be legally authorized for employment in the United States. Applicants cannot require employer sponsored work authorization now or in the future for employment in the United States. Concept Systems offers a full range of comprehensive benefits including medical, dental, flexible spending,401(k), generous paid time off programs, profit sharing, and company paid training - in addition to a professional and business casual environment. Concept Systems is an Equal Opportunity Employer
$74k-98k yearly est. 4d ago
Project Engineer
International Paper 4.5
Mechanical engineer job in Springfield, OR
**Project Engineer - Packaging Solutions North America (PSNA) Engineering** ** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **Job Identification** 1082326
$115k-134k yearly 14d ago
AI Research Engineer
Agility 4.6
Mechanical engineer job in Salem, OR
Agility Robotics is a pioneer. Our robot, Digit, is the first to be sold into workplaces across the globe. Our team is differentiated by its expertise in imagining, engineering, and delivering robots with advanced mobility, dexterity, intelligence, and efficiency -- robots specifically designed to work alongside people, in spaces built for people. Every day, we break through engineering challenges and invent new solutions and capabilities that will one day make robots commonplace and approachable. This work is our passion and our responsibility: our mission is to make businesses more productive and people's lives more fulfilling. About the Role The AI innovation team at Agility works on building and deploying next-generation robot foundation models and end-to-end policies on humanoid robots. Your goal will be to develop and test cutting-edge methods for imitation learning and reinforcement learning on humanoid robots, in order to establish the techniques necessary for humanoid robots to perform different real-world tasks. You will work on a team, running experiments on humanoid robots, and will research and implement methods which can be transferred into production. About The Work Design, train, and deploy robust policies for locomotion, manipulation, and dynamic interactions with the environment. Develop core reinforcement learning infrastructure, including scalable training pipelines and evaluation frameworks. Design and implement new simulation environments and tasks to support training and deployment of control policies. Develop, design, and test imitation learning methods Collaborate with Robotics Software and AI engineering teams to develop policies which can be transferred to production About You 3+ years of experience developing and deploying learning-from-demonstration Strong programming skills in Python, with proficiency in deep learning frameworks such as PyTorch. Experience with modern learning-from-demonstration tools like DiffusionPolicy Experience with robot data collection, training, and testing on hardware to perform manipulation tasks. Ability to work collaboratively in a fast-paced environment to deliver safe, high-quality software. Bonus Qualifications Advanced degree (MS or PhD) in Robotics, Computer Science, or a related field. Publications in top ML or robotics conferences (e.g. NeurIPS, ICML, CoRL, RSS, ICRA). Familiarity with robot simulation environments (e.g. Mujoco, Isaac Sim) and sim-to-real transfer techniques. Experience with modern reinforcement learning techniques for locomotion, manipulation, and whole-body control Experience with writing performant, high quality software in C++ This role is hybrid based out of any of our three office locations in Pittsburgh, Salem, or San Francisco Bay Area. Full-time Employees are eligible for Benefits: 401(k) Plan: Includes a 6% company match. Equity: Company stock options. Insurance Coverage: 100% company-paid medical, dental, vision, and short/long-term disability insurance for employees. Benefit Start Date: Eligible for benefits on your first day of employment. Well-Being Support: Employee Assistance Program (EAP). Time Off: Exempt Employees: Flexible, unlimited PTO and 10 company holidays, including a winter shutdown. Non-Exempt Employees: 10 vacation days, paid sick leave, and 10 company holidays, including a winter shutdown, annually. On-Site Perks: Catered lunches four times a week and a variety of healthy snacks and refreshments at our Salem and Pittsburgh locations. Parental Leave: Generous paid parental leave programs. Work Environment: A culture that supports flexible work arrangements. Growth Opportunities: Professional development and tuition reimbursement programs. Relocation Assistance: Provided for eligible roles. All of our roles are U.S.-based. Applicants must have current authorization to work in the United States. Agility Robotics is committed to a work environment in which all individuals are treated with respect and dignity. Each individual has the right to work in a professional atmosphere that promotes equal employment opportunities and prohibits unlawful discriminatory practices, including harassment. Therefore, it is the policy of Agility Robotics to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Agility Robotics prohibits any such discrimination or harassment. Agility Robotics does not accept unsolicited referrals from third-party recruiting agencies. We prioritize direct applicants and encourage all qualified candidates to apply directly through our careers page. If you are represented by a third party, your application may not be considered. To ensure full consideration, please apply directly. Apply Now: ***************************
$91k-126k yearly est. Auto-Apply 4d ago
Manufacturing Engineer (Performance Engineer)
Atimaterials
Mechanical engineer job in Albany, OR
Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is hiring a Manufacturing Engineer (Performance Engineer) for our Millersburg, OR facility in the Fabrication Department. This is an onsite position. This is a key role in analyzing and monitoring our overall equipment effectiveness and driving issues to resolution. This is the perfect role for someone with an engineering degree who wants to get an introduction into a successful manufacturing company, working across different business functions, and use their engineering education or experience. You will identify improvements and implement effective solutions through collaboration with the appropriate functions and teams. Primary Responsibilities Own and eliminate production losses, whether in utilization, yield, or uptime, to ensure effective solutions are implemented. Evaluates and categorizes production losses for proper classification for targeted improvement efforts. Record, analyze, and interpret production deviation data to determine trends and opportunities for performance improvement. Determines and prioritizes corrective actions to close operational performance gaps. Review daily operating logs to identify equipment reliability issues and collaborate with teams to address challenges. Partner with reliability engineers to identify and address equipment losses to ensure long-term reliability improvements. Works with the Capability Leader to determine solutions for mitigating losses due to operating discipline. Monitors and analyzes the effectiveness of the reliability program to ensure performance targets are met and areas for improvement are addressed. Lead criticality analysis for equipment within the area, focusing on high-priority equipment. Identifies needs and resources for Root Cause Analysis (RCA) and the appropriate level of investigation for issues that arise. Provides input to turnaround scope for availability and equipment reliability opportunities that cannot be addressed during regular operations. Evaluate improvement proposals to uncover their true value and alignment with business goals. Provides subject matter expertise in support of key performance improvement initiatives.
$66k-91k yearly est. 2d ago
Manufacturing Engineer (Performance Engineer)
Atimetals
Mechanical engineer job in Albany, OR
Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is hiring a Manufacturing Engineer (Performance Engineer) for our Millersburg, OR facility in the Fabrication Department. This is an onsite position. This is a key role in analyzing and monitoring our overall equipment effectiveness and driving issues to resolution. This is the perfect role for someone with an engineering degree who wants to get an introduction into a successful manufacturing company, working across different business functions, and use their engineering education or experience. You will identify improvements and implement effective solutions through collaboration with the appropriate functions and teams. Primary Responsibilities Own and eliminate production losses, whether in utilization, yield, or uptime, to ensure effective solutions are implemented. Evaluates and categorizes production losses for proper classification for targeted improvement efforts. Record, analyze, and interpret production deviation data to determine trends and opportunities for performance improvement. Determines and prioritizes corrective actions to close operational performance gaps. Review daily operating logs to identify equipment reliability issues and collaborate with teams to address challenges. Partner with reliability engineers to identify and address equipment losses to ensure long-term reliability improvements. Works with the Capability Leader to determine solutions for mitigating losses due to operating discipline. Monitors and analyzes the effectiveness of the reliability program to ensure performance targets are met and areas for improvement are addressed. Lead criticality analysis for equipment within the area, focusing on high-priority equipment. Identifies needs and resources for Root Cause Analysis (RCA) and the appropriate level of investigation for issues that arise. Provides input to turnaround scope for availability and equipment reliability opportunities that cannot be addressed during regular operations. Evaluate improvement proposals to uncover their true value and alignment with business goals. Provides subject matter expertise in support of key performance improvement initiatives.
$66k-91k yearly est. 2d ago
Research and Development Engineer
Reynolds Consumer Products 4.5
Mechanical engineer job in Albany, OR
Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive salaries and benefits in an exciting, dynamic, fast-paced, and high-performance organization. If you are looking to build a strong career, we have an opportunity for you! We are searching for a Research and Development Engineer to join our team located at our facility in Albany, OR. Responsibilities Your Role: The Research and Development Engineer will lead projects driving the next generation of sustainable, high-performance products. This role owns multiple initiatives from concept through commercialization, including new materials, tooling design, and process trials. The ideal candidate combines strong technical depth with manufacturing experience and thrives in a fast-paced applied R&D environment where ideas move rapidly from prototype to production. You are someone who is both strategic and tactical, capable of designing experiments, leading trials, and working side-by-side with technicians to deliver results that accelerate innovation and scale. You will have the opportunity to Make Great Things Happen! Lead and manage multiple material, product, and process development projects from formulation to commercialization. Design, communicate, and execute structured experiments and trials in partnership with technicians and cross-functional teams. Develop and optimize tooling and process solutions to meet performance, manufacturability, and cost targets. Collect, analyze, and interpret trial data using DOE and statistical methods to draw clear conclusions and drive decisions. Present results and recommendations with clarity to peers, leadership, and cross-functional stakeholders. Create and maintain detailed documentation of materials, process settings, tooling revisions, and outcomes to ensure repeatability and learning transfer. Collaborate with operations and manufacturing teams to transition successful projects into production while supporting scale-up and validation. Identify and implement opportunities to improve efficiency, repeatability, safety, and data capture within R&D workflows. You will love it here if… You put safety first, always You listen, learn, and evolve You are passionate about collaboration, teamwork, and achieving shared goals You treat all people with respect, operating ethically, and embrace inclusivity You are committed to improving our impact on local communities What Success Looks Like! You will take ownership of your projects from start to finish, stay close to the process, and deliver results that become real, manufacturable product using project management fundamentals and tools. You will combine creativity and analytical rigor to solve complex problems, and you move fluidly between strategy and hands-on execution. You elevate those around you through example, mentorship, and technical excellence. You are data-driven, proactive, and thrive in an environment that rewards curiosity, ownership, and pace. Qualifications We need you to have: Bachelor's degree in Materials Science, Chemical Engineering, Mechanical Engineering, or a related field. (Advanced degrees with related experience) 5+ years of experience in manufacturing, product development, or applied R&D (injection molding or extrusion preferred). Proven ability to lead hands-on trials, analyze complex data, and translate insights into actionable improvements. Deep understanding of polymers, tooling design, and processing principles. Proficiency in SolidWorks, Excel, and statistical analysis tools; experience with DOE and structured data analysis required. Excellent communication and collaboration skills with the ability to convey technical information clearly across levels. Demonstrated drive for innovation, curiosity, and continuous improvement. Passion for sustainability, materials innovation, and transforming concepts into scalable manufacturing solutions. Icing on the cake: Masters degree in Mechanical, Electrical, or Chemical Engineering. 10+ years of applicable experience. If you answer yes to the following…we want to meet you! Intellectual Curiosity: Do you have an inquisitive nature? Problem Solving: Do you have a knack for tackling issues head-on? Entrepreneurship: Do you enjoy taking ownership of your work? Customer Centricity: Do you always act in the best interests of the customer, putting their needs first? Growth Mindset: Do you focus on progress rather than perfection? Continuous Improvement: Are you never satisfied with the status quo? Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Posted Salary Range USD $90,000.00 - USD $100,000.00 /A
$90k-100k yearly Auto-Apply 3d ago
Project Engineer
Vets Hired
Mechanical engineer job in Albany, OR
This position scopes, plans, and manages capital projects to provide new equipment and capabilities to company assets with a focus on growing pharmaceutical process capabilities. Provides engineering support to R&D/Technical Services, Manufacturing, Quality, and Maintenance pertaining to R&D, laboratory, production equipment, utility systems, and facilities. Ensures compliance with process safety, product, and environmental regulations. Main aspects of the role include: Executes all aspects of capital projects as assigned, including cost estimates, scope definition, capital appropriation requests, design specifications, bidding, budget management, contractor management, installation, and start-up. Establishes viable contractors, vendors, and fabricators. Identifies new technologies and equipment solutions to improve operations. Provides technical support to R&D, manufacturing, and maintenance as required for lab, processing, and packaging systems optimization and structural changes. Performs work in accordance with all applicable local, state, and federal codes and regulations, including compliance with OSHA, USDA, FDA, UBC codes, and SQF and ISO regulations and programs as applicable. Utilizes asset management software - including the addition of new assets and applicable information, as well as leveraging data for analysis and referencing historical data to inform upcoming project decisions. You! The ideal candidate will have a Bachelor's Degree in Mechanical, Chemical, or Industrial Engineering. In addition, this candidate should have experience in scoping, managing, and executing successful capital projects in the pharmaceutical industry. A minimum of 5 years of experience working in the pharmaceutical industry, specifically in a technical capacity, is required. The individual should have a demonstrated aptitude for design and implementation for new processes and equipment in a manufacturing environment. Finally, this individual must possess organizational, interpersonal, and problem-solving skills. Working Place: Albany, Oregon, United States Company : Feb 27th 2025 Virtua Fair - Oregon Freeze Dey
$68k-92k yearly est. 60d+ ago
Traveling Project Engineer - National Building Group
Layton Construction Company 4.8
Mechanical engineer job in Corvallis, OR
The Project Engineer assists Project Managers to ensure that work installed on the project meets plan and specification requirements. This position operates nationally and requires relocation to the project site. If you're unable to relocate, please consider applying for a role that aligns more closely with your needs. Duties and Responsibilities Assures compliance by becoming intimately familiar with the assigned project plans and specifications. Reviews shop drawing and submittals. Reviews plans from the standpoint of value analysis and constructability, ensuring appropriate materials are utilized. Communicates inconsistencies to the architect. Recommends labor saving and other cost-saving methods, which will save Layton and/or the owner money in actual construction. Attends and takes notes for project team meetings, including weekly Owner/Architect meetings and subcontractor coordination meetings. Distributes meeting minutes to participants. Publishes weekly progress reports for assigned projects and follows up for receipt, review, and distribution of information required for project construction. Updates project schedules as needed. Assists in bidding and in developing scope of work for trade contractors. Works with the superintendent to prepare project schedule, including establishing dates for receiving shop drawings and milestones necessary to complete the project on time. Follows up for review and approval for shop drawings, samples, material lists, etc. Maintains logs, reflecting the status of shop drawings, requests for clarification, change requests, and proposal requests. Advises on proper procedures for concrete pours. Inspects structural reinforcing. Coordinates standard slump and compaction testing to verify compliance to specifications. Reviews field procedures and final installation of structural elements to ensure compliance of the work. Performs work sampling. Observes and analyzes work methods, techniques, and procedures to advise superintendent on improvement of production efficiency. Comply with all safety policies, practices and procedures. Report unsafe activities to supervisor and/or Safety. Qualifications Bachelor's degree in construction management or related field, or an equivalent combination of education and experience. 1+ year of experience with a commercial general contractor, or comparable internship experience, preferred. Good written and oral communication skills. Expresses self clearly and effectively when talking with individuals and groups. Demonstrates poise and mastery of language. Expresses ideas clearly in writing. Uses proper organization and grammar. Working knowledge of Word and Excel. Flexibility: Willing to modify plans and behavior when necessary to meet a goal. Cooperation: Works well with other people. Takes time to help co-workers, customers and others achieve their goals and assignments. The ability to read and understand blueprints. Learning Ability: Has the ability and desire to quickly learn new job-related information. The ability to understand and apply OSHA and company safety requirements. Has integrity: maintains normal standards of ethics, conduct, and organizational policies in job-related activities. Problem Solving: Solves practical problems and deals with a variety of variables in situations where only limited standardization exists; interprets a variety of complex instructions. Working knowledge of scheduling programs preferred. Benefits: Layton Construction offers the following benefits for this position, subject to applicable eligibility requirements: Medical Insurance, Dental Insurance, Vision Insurance, Health Savings Account, Healthcare Flexible Spending Account, Dependent Care Flexible Spending Account, 401(k) retirement plan with employer match, Life & AD&D Insurance, Long-term Disability Insurance, Short-term Disability Insurance, Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Home & Auto Insurance, Family Support, Pre-tax Paid Parking/Public Transportation, Paid time off: 2 Weeks for Non-Exempt and Three Weeks for Exempt, Time Away Benefits, 8 Paid Holidays, Group Legal, Employee Stock Purchase Plan, Identity Theft Protection, Group Legal, Pet Insurance, Employee Assistance Program. EEO Statement: Layton Construction is an equal opportunity employer. We evaluate qualified employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
$63k-81k yearly est. Auto-Apply 1d ago
Manufacturing Engineer- Eugene Airport Road
Default 4.5
Mechanical engineer job in Eugene, OR
BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team more than 4,000 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We're looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. LOCATION: Eugene Oregon ABOUT THE POSITION Primary Process Owner, who works closely with all aspects of Astec, Inc. operations (manufacturing, quality, OpEx and safety) to develop safe, efficient and reliable manufacturing methods. Identifies process improvement opportunities (productivity and reduce costs), allowing Astec to create a sustainable competitive advantage through the use of Kaizen, lean tools and methods. Leads cross functional events to analyze and deploy standards and techniques, to improve quality, ensure on-time delivery, control costs and/or other engineering/economic objectives; Applies visual and auditable, manufacturing best practices to solve problems, improve performance and productivity, while eliminating waste. Deliverables & Responsibilities • Develops, evaluates, and recommends improvements in manufacturing methods through new processes and modifications, minimizing cost and effectively applying production capabilities. • Implements process improvements through time studies, process mapping, value-stream mapping, spaghetti mapping and workload balancing, through cross-functional team collaboration using standard lean tool sets, achieves safety and process improvements, through reductions cycle-time, rework, scrap, inventory, overtime, space, on-time completions, etc. • Facilitates continuous improvements through the use of lean tools and coordinates lean training, development activities of all employees. • Works with manufacturing to analyze and plan work force utilization, space requirements, material routing and handling methods, manufacturing processes and methods, machine and tool design applications, workflow and new technology and designs layout of equipment and workspace for maximum efficiency, safety and quality. • Estimates production times, capacity requirements and related costs to provide information for management decisions and to meet completion dates and technical specifications. • Develops proposals, evaluates new development programs and recommends changes in parts specifications, manufacturing processes and production methods and/or objectives to improve quality, productivity, manufacturability and safety as required. • Applies statistical methods to estimate future manufacturing requirements and potential. • Responsible for the transition of new product introductions from engineering to manufacturing, including capacity analysis, process robustness and process validations. • Develops and maintains the manufacturing process work instructions and assembly tooling that are initiated by product design or method improvement changes. • Specify new equipment and design required fixtures, jigs and tooling needed to meet production and quality requirements. • Prepares and makes presentations to individuals and groups using Microsoft Office applications. • Researches, organizes, analyzes and maintains records of technical information from a variety of sources. • Follows company policies and procedures at all times. • Follows proper safety rules and procedures at all times. • Performs special projects other duties as assigned. To be successful in this role, your experience and competencies are: • Bachelor's degree in industrial, manufacturing, mechanical engineering or related field required. • Minimum of three (3) years related work experience in a manufacturing environment required with a demonstrated understanding of heavy machinery manufacturing processes. • Knowledge of machine shop operations/processes required. • Knowledge of LEAN methods used in manufacturing processes required. • Knowledge of all types of metal-cutting processes, to include punch, plasma, and flame cutting required. • Knowledge of engineering/manufacturing system of symbols, legends, shading and lines required and skill reading engineering drawings required. • Knowledge and understanding of nesting software for material optimization preferred. • Must be able to collaborate and facilitate cross functional teams to influence and manage change in a heavy manufacturing, multi-shift work environment. • Must be able to meet regular attendance requirements. Supervisor and Leadership Expectations. Does this role have supervisory or managerial responsibilities? No Does this role have budgetary or program management responsibilities? (must state if manager and above title with no direct reports). No Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers • Honesty and integrity in all aspects of business • Respect for all individuals • Preserving entrepreneurial spirit and innovation • Safety, quality and productivity as means to ensure success Travel Requirements: 10% of travel, regional, international
$67k-88k yearly est. 51d ago
Associate Facilities Engineer
Waseyabek Development Company LLC
Mechanical engineer job in Albany, OR
Mission Waséyabek Federal Services, LLC (WFS) is a 100% Tribally owned, Native American SBA 8(a) small business of the Nottawaseppi Huron Band of the Potawatomi (NHBP). WFS is part of a portfolio of companies managed by Waséyabek Development Company, LLC, a 100% Tribally owned economic development firm focused on income diversification on behalf of NHBP that reaches beyond gaming and is a well-funded, experienced small business, with substantial liquid assets and experience in federal contracting. WFS has borrowing capacity to meet the daily cash needs of new business development, new award support, and operational working capital. WFS is well-versed in federal contract compliance and provides outstanding support services Position Summary Perform a range of technical/engineering assignments under the supervision of a senior engineer on less complex assignments. Generally, functions in the following activities: engineering design packages for replacement of in-kind equipment, designs to address maintenance needs, construction inspections, general space management plans, infrastructure alterations, infrastructure management, specialty engineering services, and some project management responsibilities. Responsibilities: Performs a range of mechanical/civil design, development, analysis, or review tasks under supervision. Provides less complex AutoCAD facility engineering design drawings, statement of work bid packages, and project cost estimates. Able to assemble design specifications for projects. Understands the construction process and is able to apply this knowledge to general work responsibilities. Ensures compliance with established standards, guides, precedents, methods, and techniques within the discipline. Conducts site visits, experimental investigations and analyzes engineering problems, proposes solutions and alternatives, and provides recommendations. Generates space management plans under supervision. Coordinates contractor on-site visits. Minimum Qualifications, Knowledge, Skills, and Abilities: Bachelor's degree in Mechanical or Civil Engineering or related field. Must have 1 year of job-related experience. Excellent communications and analytical skills; working knowledge of computer systems and integrated software application programs. Position may require the ability to pass and maintain a Security Clearance. Ability to pass a Fit for Duty employment test to verify the ability to meet the physical and functional demands of the position. Ability to pass a pre-employment drug screen. Ability to pass a background investigation, including but not limited to a nationwide criminal record search, and other relevant background information deemed necessary by the contract. United States citizenship is required to work on a federal contract and will be electronically verified via E-Verify. Physical Requirements: Most positions involve work typical of an office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting with occasional use of a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/organizing skills, and must be able to work under deadlines. Travel Requirements: May require travel Disclaimer: This job description indicates in general the nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under the Americans with Disabilities Act) expected of an incumbent. It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of an incumbent. An incumbent may be asked to perform other duties as required.
$73k-106k yearly est. Auto-Apply 38d ago
Manufacturing Engineer- Eugene Airport Road
Astec Industries 4.6
Mechanical engineer job in Eugene, OR
Job Description BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team more than 4,000 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We're looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. LOCATION: Eugene Oregon ABOUT THE POSITION Primary Process Owner, who works closely with all aspects of Astec, Inc. operations (manufacturing, quality, OpEx and safety) to develop safe, efficient and reliable manufacturing methods. Identifies process improvement opportunities (productivity and reduce costs), allowing Astec to create a sustainable competitive advantage through the use of Kaizen, lean tools and methods. Leads cross functional events to analyze and deploy standards and techniques, to improve quality, ensure on-time delivery, control costs and/or other engineering/economic objectives; Applies visual and auditable, manufacturing best practices to solve problems, improve performance and productivity, while eliminating waste. Deliverables & Responsibilities • Develops, evaluates, and recommends improvements in manufacturing methods through new processes and modifications, minimizing cost and effectively applying production capabilities. • Implements process improvements through time studies, process mapping, value-stream mapping, spaghetti mapping and workload balancing, through cross-functional team collaboration using standard lean tool sets, achieves safety and process improvements, through reductions cycle-time, rework, scrap, inventory, overtime, space, on-time completions, etc. • Facilitates continuous improvements through the use of lean tools and coordinates lean training, development activities of all employees. • Works with manufacturing to analyze and plan work force utilization, space requirements, material routing and handling methods, manufacturing processes and methods, machine and tool design applications, workflow and new technology and designs layout of equipment and workspace for maximum efficiency, safety and quality. • Estimates production times, capacity requirements and related costs to provide information for management decisions and to meet completion dates and technical specifications. • Develops proposals, evaluates new development programs and recommends changes in parts specifications, manufacturing processes and production methods and/or objectives to improve quality, productivity, manufacturability and safety as required. • Applies statistical methods to estimate future manufacturing requirements and potential. • Responsible for the transition of new product introductions from engineering to manufacturing, including capacity analysis, process robustness and process validations. • Develops and maintains the manufacturing process work instructions and assembly tooling that are initiated by product design or method improvement changes. • Specify new equipment and design required fixtures, jigs and tooling needed to meet production and quality requirements. • Prepares and makes presentations to individuals and groups using Microsoft Office applications. • Researches, organizes, analyzes and maintains records of technical information from a variety of sources. • Follows company policies and procedures at all times. • Follows proper safety rules and procedures at all times. • Performs special projects other duties as assigned. To be successful in this role, your experience and competencies are: • Bachelor's degree in industrial, manufacturing, mechanical engineering or related field required. • Minimum of three (3) years related work experience in a manufacturing environment required with a demonstrated understanding of heavy machinery manufacturing processes. • Knowledge of machine shop operations/processes required. • Knowledge of LEAN methods used in manufacturing processes required. • Knowledge of all types of metal-cutting processes, to include punch, plasma, and flame cutting required. • Knowledge of engineering/manufacturing system of symbols, legends, shading and lines required and skill reading engineering drawings required. • Knowledge and understanding of nesting software for material optimization preferred. • Must be able to collaborate and facilitate cross functional teams to influence and manage change in a heavy manufacturing, multi-shift work environment. • Must be able to meet regular attendance requirements. Supervisor and Leadership Expectations. Does this role have supervisory or managerial responsibilities? No Does this role have budgetary or program management responsibilities? (must state if manager and above title with no direct reports). No Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers • Honesty and integrity in all aspects of business • Respect for all individuals • Preserving entrepreneurial spirit and innovation • Safety, quality and productivity as means to ensure success Travel Requirements: 10% of travel, regional, international
$66k-87k yearly est. 22d ago
Project Engineer
Kerr Contractors
Mechanical engineer job in Woodburn, OR
Established in 1988, Kerr Contractors is a leading heavy civil general contractor and construction management firm headquartered in Woodburn, Oregon. Kerr Contractors is recognized as one of the most technically advanced earth-moving, road building and underground utilities contractors in the region. Our business is founded on trusting relationships, excellent service, workmanship that has enduring character, and meeting or exceeding customer expectations every time. We have staked our reputation on our ability to deliver each of these. Job Duties and Responsibilities * Ensure that safety protocols are followed, PPE and safety tools and equipment are used consistently. * Daily & weekly safety meetings/briefings are occurring. * A pre-construction safety plan is developed with the management team prior to beginning work. Promoting safety culture at Kerr is the priority. * Ensuring that quality workmanship is provided by all our crews. Systematic internal checks and QC processes are used and double checked. * Ensuring that Kerr Core Values are implemented and adhered to. * Works under the direct supervision of a Kerr Project Manager on one or more civil projects. * Ensures job records are kept current and orderly including daily reports, quantity tracking, testing and inspections, material certifications, etc. * Perform document control duties including management of submittals, RFI's, correspondence, quality documents and other project related documents. * Coordinate with field superintendent and foremen daily, learning the work and identifying issues, daily job photo record. * Reviews daily time and daily reports, ensuring proper coding of labor and equipment. * Assist with management of subcontractors, suppliers, and other vendors. * Daily overall job costing. Qualifications * Must have valid license and clean driving record * Must pass a pre-employment drug screen * BS in Construction Management, or equivalent job experience. * Experience using project management software systems such as HCSS Heavy Job, Heavy Bid, electronic document control systems and file storage, project scheduling using MS Project, SureTrak, P6 or similar CPM software. * Experience working on heavy civil contracts for public works and private owners for a variety of job types including site work, highway and road, utilities, airport, etc. This experience can include summer internships. Benefits * Competitive Salary * PTO * Community Involvement * Team Building Events * Annual Company Events * Medical, Dental, Vision and Life Insurance * Flexible Spending Accounts * 401k * Paid Holidays As an equal opportunity employer Kerr Contractors will hire without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability. Kerr Contractors also enforces a zero-tolerance drug policy. Accessibility: If you need an accommodation as part of the employment process, please contact Human Resources at Phone: ************ Email: ****************************** Equal Opportunity Employer, including disabled and veterans.
$68k-92k yearly est. 60d+ ago
Transportation Project Engineer
Blueprint Hires
Mechanical engineer job in Eugene, OR
A multi-disciplinary engineering and consulting firm specializing in innovative solutions for infrastructure and environmental projects is seeking a Transportation Project Engineer to help them design and deliver complex transportation projects, including roads, highways, and bike paths, at their Eugene, OR office. Your Day Includes Performing advanced engineering calculations and design for transportation facilities. Preparing CAD mark-ups and performing 3D corridor modeling. Writing project specifications, technical reports, and construction quantity calculations. Estimating construction costs and coordinating with clients and stakeholders. Drafting scope and budget documents, and preparing project correspondence. Must Haves PE license and a bachelor's degree in a relevant field. 6 years of experience in transportation engineering (5 years with an advanced degree). Proficiency in AutoCAD C3D, Microstation Connect, and OpenRoads. P.S. In addition to offering a comprehensive health, dental, and vision package, we also provide Health Savings Account, Krowdfit and 9 paid holidays. If you have the necessary qualifications and are excited about this opportunity, we encourage you to apply. We look forward to hearing from you. *Eligible for Blueprint Helpers referral program (find out more: blueprinthires.com/bphelpers)
$68k-93k yearly est. 45d ago
Project Engineer
Empwr
Mechanical engineer job in McMinnville, OR
As a hands-on Project Engineer, you'll play a key role in designing and technical integration of CAPEX projects. You will work side by side with oversees and local vendors, local contractors, and in house cross functional teams to accomplish our goals with safety and industry standards in mind. You'll handle complex operational challenges, bringing solutions to our machinery and workflow for continuous improvement. With a mix of machine-related tasks and broader production flow responsibilities, you'll contribute to a high-performing production environment. CAPEX Project Deliver: Projects delivered on time, within budget, and according to scope and specifications. Working closely with a variety of vendors, contractors, and in house cross functional teams to ensure success. Smooth commissioning and handover: protocols, documentation, drawings, manuals, etc. Ensure projects are following all safety standards as well as food safety standards. Collaborate with cross-functional teams to drive innovation and maintain quality standards. Innovation and Continuous Improvement. Education: Bachelor's degree in engineering, Food Science, or related field. Master's degree in engineering preferred. Documented and proven work experience could be relevant in lieu of education. Project Management Certifications preferred. Technical Expertise: Schematic plans, "PNID's", "One-line Diagrams", Layouts (AutoCAD). Hands on execution of capital projects working with OEM's, contractors, and vendors. Problem-Solver: A natural inclination for hands-on troubleshooting and continuous improvement. Strategic Thinker: Ability to maintain a broad perspective while focusing on targeted solutions. Download attachment(s) This job as a PDF file
$68k-92k yearly est. 60d+ ago
Project Engineer
Pence Companies
Mechanical engineer job in Salem, OR
Department Operations Employment Type Full Time Location Salem, OR Workplace type Onsite Key Responsibilities Qualifications Work Conditions About Pence/Kelly We build peace of mind. We build it through structures and relationships with trust, dedication and collaboration. We are innovative and excited by possibility, yet purposeful and grounded in a tradition of excellence. We seek lasting partnerships with our people and our clients. We take visions and make them tangible. We ask big questions and analyze small details. Our partners and friends know they can count on us. We don't do ego. We do teamwork. We care about success and happiness. We care about peace of mind.
$68k-92k yearly est. 51d ago
Project Engineer
Western Partitions, Inc. 3.7
Mechanical engineer job in Eugene, OR
Project Engineer Western Partitions, Inc. (WPI) is one of the largest and most reputable interior and exterior contracting firms in the US. WPI provides superior contracting services for drywall, prefabrication, metal studs, acoustical systems, wall panels, fireproofing, firestopping, stucco, claddings, painting, windows, doors/frames/hardware, and more. Since WPI's inception in 1972, we have provided award-winning construction without sacrificing integrity, safety, or efficiency. We are proud that a significant percentage of our business comes from repeat customers. Our service-oriented, fast-track approach, coupled with an attention to detail has resulted in a superior reputation within our industry. We work hard every day to earn our customers' trust and confidence. Throughout our history, our dedication to our employees, quality of work, and customers has set us apart. The strongest characteristic of our organization is the prominent level of pride we take in every job we complete. Our employees are driven to do the job right the first time without compromise. Lastly, our customers choose WPI based on the emphasis we place on communication, trust, and respect. The Project Engineer will assist the Project Manager with the setup, management, and closeout of projects at the Regional office or Jobsite to accomplish project objectives by planning, scheduling, and executing project activities throughout each phase to completion. Understand and comply with all WPI policies, procedures, and corporate safety program. Actively participate in the safety plans and measures of the assigned projects. Review contract language, scope of work, and special provisions in the contract. Make sure project team members are aware of these items. Assist with the buyout and procurement of material, subcontractor, and engineering quotes. Prepare RFI's, submittals, and shop drawings. Support and visit assigned job sites and participate in job meetings as required. Price change requests and update the budget promptly. Prepare, review, and report weekly productions. Review the weekly job cost report with the project Foreman and team. Prepare billings and approve invoices for payment. Track progress and spending, ensuring the work is completed on time and within budget. Support the implementation of job schedules. Coordinate warranties, O&M's, and closeout on projects. Requirements Basic Requirements Bachelor's degree in Construction Science, Construction Management, Business, Accounting, or related field. Minimum Requirements Ability to diagnose and process key information, recognize critical areas on the job that could impact profitability, and then actively navigate the project away from risks and liabilities for a successful outcome. Proficient in Microsoft Windows, Microsoft Office Suite (Excel, Word, and Outlook). Strong oral and written communication skills is required. Ability to work in team environment is required. Strong customer service skills are required. Ability to multitask, think critically, and problem-solve is required. Ability to learn new job skills by engaging in the technical aspects of the job and applying new skills as they are taught is required. Must be able to work independently, make decisions, and follow through on all assignments. Must possess strong organizational and computer use skills and have a high level of competency to read/write/speak English, and communicate with coworkers. Preferred Requirements Experience with drywall, metal-stud framing and ACT in the commercial market. Local to office is preferred This role is not eligible for visa sponsorship. Benefits At WPI our employees are our greatest asset. We put our people first and are proud to provide a comprehensive benefits package designed to meet the needs of our employees at every stage of life. In our commitment to fostering an environment where everyone can thrive personally and professionally, we offer: Competitive pay Incentive bonus plan 401(k) retirement savings plan with match Medical, prescription drug, dental and vision insurance plans with flexible spending account option Life insurance, accidental death, and disability benefits Flexible paid time off policy and paid holidays WPI provides equal employment and affirmative action opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. WPI is a background screening, drug-free workplace. This job description is intended to outline the general nature and level of work being performed by employees. It is not designed to cover or contain a comprehensive list of responsibilities, duties, or skills required of the employee of this job. Furthermore, this description is subject to change at the discretion of the company, with or without notice. Revised 7-11-2022
$63k-83k yearly est. 3d ago
Manufacturing Engineer- Eugene Airport Road
Astec Industries Inc. 4.6
Mechanical engineer job in Eugene, OR
BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team more than 4,000 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We're looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. LOCATION: Eugene Oregon ABOUT THE POSITION Primary Process Owner, who works closely with all aspects of Astec, Inc. operations (manufacturing, quality, OpEx and safety) to develop safe, efficient and reliable manufacturing methods. Identifies process improvement opportunities (productivity and reduce costs), allowing Astec to create a sustainable competitive advantage through the use of Kaizen, lean tools and methods. Leads cross functional events to analyze and deploy standards and techniques, to improve quality, ensure on-time delivery, control costs and/or other engineering/economic objectives; Applies visual and auditable, manufacturing best practices to solve problems, improve performance and productivity, while eliminating waste. Deliverables & Responsibilities * Develops, evaluates, and recommends improvements in manufacturing methods through new processes and modifications, minimizing cost and effectively applying production capabilities. * Implements process improvements through time studies, process mapping, value-stream mapping, spaghetti mapping and workload balancing, through cross-functional team collaboration using standard lean tool sets, achieves safety and process improvements, through reductions cycle-time, rework, scrap, inventory, overtime, space, on-time completions, etc. * Facilitates continuous improvements through the use of lean tools and coordinates lean training, development activities of all employees. * Works with manufacturing to analyze and plan work force utilization, space requirements, material routing and handling methods, manufacturing processes and methods, machine and tool design applications, workflow and new technology and designs layout of equipment and workspace for maximum efficiency, safety and quality. * Estimates production times, capacity requirements and related costs to provide information for management decisions and to meet completion dates and technical specifications. * Develops proposals, evaluates new development programs and recommends changes in parts specifications, manufacturing processes and production methods and/or objectives to improve quality, productivity, manufacturability and safety as required. * Applies statistical methods to estimate future manufacturing requirements and potential. * Responsible for the transition of new product introductions from engineering to manufacturing, including capacity analysis, process robustness and process validations. * Develops and maintains the manufacturing process work instructions and assembly tooling that are initiated by product design or method improvement changes. * Specify new equipment and design required fixtures, jigs and tooling needed to meet production and quality requirements. * Prepares and makes presentations to individuals and groups using Microsoft Office applications. * Researches, organizes, analyzes and maintains records of technical information from a variety of sources. * Follows company policies and procedures at all times. * Follows proper safety rules and procedures at all times. * Performs special projects other duties as assigned. To be successful in this role, your experience and competencies are: * Bachelor's degree in industrial, manufacturing, mechanical engineering or related field required. * Minimum of three (3) years related work experience in a manufacturing environment required with a demonstrated understanding of heavy machinery manufacturing processes. * Knowledge of machine shop operations/processes required. * Knowledge of LEAN methods used in manufacturing processes required. * Knowledge of all types of metal-cutting processes, to include punch, plasma, and flame cutting required. * Knowledge of engineering/manufacturing system of symbols, legends, shading and lines required and skill reading engineering drawings required. * Knowledge and understanding of nesting software for material optimization preferred. * Must be able to collaborate and facilitate cross functional teams to influence and manage change in a heavy manufacturing, multi-shift work environment. * Must be able to meet regular attendance requirements. Supervisor and Leadership Expectations. Does this role have supervisory or managerial responsibilities? No Does this role have budgetary or program management responsibilities? (must state if manager and above title with no direct reports). No Our Culture and Values Employees that become part of Astec embody the values below throughout their work. * Continuous devotion to meeting the needs of our customers * Honesty and integrity in all aspects of business * Respect for all individuals * Preserving entrepreneurial spirit and innovation * Safety, quality and productivity as means to ensure success Travel Requirements: 10% of travel, regional, international
$66k-87k yearly est. 52d ago
Project Engineer
Western Partitions 3.7
Mechanical engineer job in Eugene, OR
Western Partitions, Inc. (WPI) is one of the largest and most reputable interior and exterior contracting firms in the US. WPI provides superior contracting services for drywall, prefabrication, metal studs, acoustical systems, wall panels, fireproofing, firestopping, stucco, claddings, painting, windows, doors/frames/hardware, and more. Since WPI's inception in 1972, we have provided award-winning construction without sacrificing integrity, safety, or efficiency. We are proud that a significant percentage of our business comes from repeat customers. Our service-oriented, fast-track approach, coupled with an attention to detail has resulted in a superior reputation within our industry. We work hard every day to earn our customers' trust and confidence. Throughout our history, our dedication to our employees, quality of work, and customers has set us apart. The strongest characteristic of our organization is the prominent level of pride we take in every job we complete. Our employees are driven to do the job right the first time without compromise. Lastly, our customers choose WPI based on the emphasis we place on communication, trust, and respect. The Project Engineer will assist the Project Manager with the setup, management, and closeout of projects at the Regional office or Jobsite to accomplish project objectives by planning, scheduling, and executing project activities throughout each phase to completion. Understand and comply with all WPI policies, procedures, and corporate safety program. Actively participate in the safety plans and measures of the assigned projects. Review contract language, scope of work, and special provisions in the contract. Make sure project team members are aware of these items. Assist with the buyout and procurement of material, subcontractor, and engineering quotes. Prepare RFI's, submittals, and shop drawings. Support and visit assigned job sites and participate in job meetings as required. Price change requests and update the budget promptly. Prepare, review, and report weekly productions. Review the weekly job cost report with the project Foreman and team. Prepare billings and approve invoices for payment. Track progress and spending, ensuring the work is completed on time and within budget. Support the implementation of job schedules. Coordinate warranties, O&M's, and closeout on projects. Requirements Basic Requirements Bachelor's degree in Construction Science, Construction Management, Business, Accounting, or related field. Minimum Requirements Ability to diagnose and process key information, recognize critical areas on the job that could impact profitability, and then actively navigate the project away from risks and liabilities for a successful outcome. Proficient in Microsoft Windows, Microsoft Office Suite (Excel, Word, and Outlook). Strong oral and written communication skills is required. Ability to work in team environment is required. Strong customer service skills are required. Ability to multitask, think critically, and problem-solve is required. Ability to learn new job skills by engaging in the technical aspects of the job and applying new skills as they are taught is required. Must be able to work independently, make decisions, and follow through on all assignments. Must possess strong organizational and computer use skills and have a high level of competency to read/write/speak English, and communicate with coworkers. Preferred Requirements Experience with drywall, metal-stud framing and ACT in the commercial market. Local to office is preferred This role is not eligible for visa sponsorship. Benefits At WPI our employees are our greatest asset. We put our people first and are proud to provide a comprehensive benefits package designed to meet the needs of our employees at every stage of life. In our commitment to fostering an environment where everyone can thrive personally and professionally, we offer: Competitive pay Incentive bonus plan 401(k) retirement savings plan with match Medical, prescription drug, dental and vision insurance plans with flexible spending account option Life insurance, accidental death, and disability benefits Flexible paid time off policy and paid holidays WPI provides equal employment and affirmative action opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. WPI is a background screening, drug-free workplace. This job description is intended to outline the general nature and level of work being performed by employees. It is not designed to cover or contain a comprehensive list of responsibilities, duties, or skills required of the employee of this job. Furthermore, this description is subject to change at the discretion of the company, with or without notice. Revised 7-11-2022
$63k-83k yearly est. Auto-Apply 30d ago

Learn more about mechanical engineer jobs

How much does a mechanical engineer earn in Corvallis, OR?

The average mechanical engineer in Corvallis, OR earns between $64,000 and $111,000 annually. This compares to the national average mechanical engineer range of $58,000 to $97,000.

Average mechanical engineer salary in Corvallis, OR

$84,000

$64,00010%

$84,000Median

$111,00090%

What are the biggest employers of Mechanical Engineers in Corvallis, OR?

The biggest employers of Mechanical Engineers in Corvallis, OR are:

NuScale Power
CONCEPTS, INC.
CONCEPTS

Job type you want

Full Time

Part Time

Internship

Temporary

Mechanical engineer jobs in Corvallis, OR - 115 jobs

Sr. Mechanical Engineer

Engineer Intern - Mechanical