Mechanical engineer jobs in Decatur, IL - 270 jobs

Hanson Values Integrity | Commitment | Quality | Relationships | Innovation If you're looking for a firm that encourages innovative thinking and challenges you every day, with an opportunity to learn and advance, a career at Hanson is right for you. The belief in sustainability within our company's practices creates a focus on client success and partnerships that are important to our communities and our environment. A Day in Life of a Mechanical Engineer at Hanson Here's a snapshot of what you would do in this role: Design, analyze, and optimize HVAC systems for government, commercial, and industrial buildings, ensuring energy efficiency and compliance with relevant codes and standards. Develop detailed plans, specifications, and drawings for HVAC and plumbing systems, including ductwork, piping layouts, equipment selection, and sizing calculations. Conduct site visits to assess existing HVAC and plumbing systems, identify deficiencies, and propose cost-effective solutions for upgrades or replacements. Perform comprehensive facilities condition assessments on government and/or military facilities, focusing on HVAC and plumbing systems. Collaborate with architects, contractors, and other stakeholders to integrate mechanical systems into building designs and renovations. Utilize computer-aided design (CAD) software and simulation tools to model and simulate HVAC and plumbing systems. Prepare written reports and presentations summarizing findings, recommendations, and project updates for internal and external stakeholders. Provide high-level cost estimates, utilizing industry-standard cost estimation databases. Stay abreast of industry trends, emerging technologies, and regulatory changes related to HVAC and plumbing. Ability to travel up to 30% of the time. What We're Looking For We feel the following qualifications would set you up for success in this role: Education/Experience: Bachelor of Science Degree in Mechanical Engineering Minimum of 7 years in the consulting professional services industry, in the Mechanical Engineering Discipline Licensure as a professional engineer. Skills: Specific technical experience with the preparation of HVAC and plumbing construction drawings, specifications, submittals review and construction administration. Experience performing facilities condition assessments for HVAC and plumbing systems. Strong understanding of building codes, standards, and regulations related to mechanical systems (e.g., ASHRAE, International Mechanical Code). Familiarity with Microsoft Office, AutoCAD, and REVIT software. Ability to collaborate on multiple projects concurrently. Ability to assume task leadership responsibilities by guiding CAD/Revit technicians and other Engineers/Designers. Strong written and oral communication skills. Familiarity with energy analysis software such as ComCheck and FLACOM EnergyGauge, and load calculation software, such as Trane Trace 700 or equivalent software. A candidate having the ability to obtain a Top-Secret clearance is preferred but not required. The salary range for this position is $100,000 - $145,000 per year. This position may also be eligible for annual discretionary bonuses. Benefits Our focus on people means we offer a generous benefits program to help you create a solid foundation for health and security throughout your career, including: Competitive compensation Performance bonuses 401(k) with matching contribution Employee Stock Ownership Plan Comprehensive health & well-being plans Financial wellness plans Work-life balance programs Want to know more? Visit our benefits page for all the details. Culture We understand that selecting a job is about more than the day-to-day tasks. It's important to feel like you belong and safe to grow and progress along your career path. You'll find that at Hanson. We have an inclusive, diverse workforce awaiting to connect with you and numerous opportunities to cultivate your career, including: Monthly educational webinars Leadership training Lunch & learn development sessions 24/7 access to thousands of skill-building courses Mentorship opportunities Award-winning internship program Employee recognition And so much more! AN EQUAL OPPORTUNITY EEO - EMPLOYER We do not accept unsolicited resumes from recruiters or agencies/staffing firms. Resumes are only accepted from recruiters and agency/staffing firms if a signed agreement is in place at the inception of the recruiting effort and authorized for a specified position.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Internship Term: Summer 2026 This is a general application, and is not an official opening. Your application can be considered for Rivian's 2026 internship programs. If you are selected, you will receive an invitation to interview for an open position. Rivian internships are experiences optimized for student candidates. To be eligible, you must be an undergraduate or graduate student in an accredited program during the internship term with an expected graduation date between December 2026 and 2028. If you are not pursuing a degree, please see our full time positions on our Rivian careers site. Note that if your university has specific requirements for internship programs, it is your responsibility to fulfill those requirements. Responsibilities Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes Qualifications Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Pay Disclosure Salary Range/Hourly Rate for Internships: The range of pay for internships is 25.00-51.00 per hour. Actual compensation will be determined based on location, and other factors permitted by law. Rivian provides robust wellness benefits, and a medical insurance package for interns, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes

Job Title: Mechanical Design EngineerJob Description We are seeking a skilled Mechanical Design Engineer to join our dynamic team in Bloomington, IL. The ideal candidate will be responsible for designing, developing, and optimizing mechanical systems and conveyor solutions. This role requires a strong understanding of engineering principles, creativity in problem-solving, and proficiency in CAD software. Responsibilities * Create detailed designs and specifications for mechanical components, assemblies, and systems using CAD software (AutoCAD, SolidWorks). * Develop and test prototypes to ensure designs meet performance standards and customer requirements. * Manage project timelines, resources, and budgets to ensure successful completion of design projects. * Work closely with clients, engineers, and manufacturing teams to ensure design specifications are met and projects are delivered on time. * Prepare technical reports, design specifications, and operational manuals. * Stay updated with the latest advancements in technology, design trends, and engineering best practices. Essential Skills * Bachelor's degree in Mechanical Engineering or related field. * Minimum of 2 years of experience in mechanical design engineering. * Proficiency in CAD software (AutoCAD, SolidWorks). * Strong analytical and problem-solving skills. * Excellent verbal and written communication abilities. * Ability to manage multiple projects simultaneously. * Knowledge of conveyor systems and industrial equipment. Additional Skills & Qualifications * PE certification. * Experience with FEA and 3D printing technologies. * Familiarity with manufacturing processes and materials. Work Environment Join a smaller privately held company where you will work on massive complex recycling conveyor systems from start to finish. Enjoy great benefits, exposure to all facets of engineering, and significant opportunities for growth. Job Type & Location This is a Contract to Hire position based out of Normal, IL. Pay and Benefits The pay range for this position is $28.00 - $44.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Normal,IL. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Details Division: CHI Overhead Doors Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. C.H.I. Overhead Doors is seeking a Mechanical Engineer to help us meet our goals for 2025 and beyond. The Mechanical Engineer will perform engineering duties in planning and designing residential/commercial garage doors, hardware components, and other infrastructure. This role works collaboratively with internal and external customers, industry and building products experts, and other resources to develop these products and processes for the organization. We are committed to innovation, and the Mechanical Engineer will be at the forefront of this exciting work. Additional Responsibilities: Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems, and processes to meet requirements, applying knowledge of engineering principles. Troubleshoot defects to determine root cause failures and implement innovative product, process, and equipment countermeasures. Conduct research that tests or analyzes the feasibility, design, operation, or performance of products, equipment, components, or systems. Develop and test models of alternate designs and processing methods to assess feasibility, operating condition effects, possible new applications, and necessity of modification. Estimate component, capital, and manufacturing costs for product designs. Design Documentation - Modeling; Drawings; Mfg.; Bill of Materials; QC Forms; Operator's, Maintenance, Parts, Etc. Manuals (Detail Oriented). Compensation Data Starting Base Salary Range: $81,994-$115,378 ROA Bonus ROA Bonus percentage is variable, determinate upon company performance each year, up to 33% of annual salary. Profit-Sharing 10% of Nucor's pre-tax earnings are contributed to the Profit Sharing Plan annually and distributed to all eligible teammates. A large portion is deposited into your profit-sharing account, and a smaller portion is distributed in cash. Current 6-year average = 19.88% of your eligible earnings. Eligible earnings include regular pay, overtime, and bonus.Benefits C.H.I. Overhead Doors, a Nucor company, is proud to offer industry-leading benefits to its teammates. Visit nucor.com/benefits to learn more. These benefits include, but are not limited to: Annual Profit-Sharing Bonus 401K program with company match Paid maternity & Paternity leave Paid time off, 11 paid holidays, 1 personal day Short-term disability/sick pay Zero-deductible medical & dental insurance Vision insurance Teladoc (free virtual access to medical, dermatology, and mental health professionals) No-cost physical therapy & wellness programs Nucor stock purchase plan with company match Minimum Qualifications: Bachelor's Degree (four-year college or technical school) Required, Field of Study: Mechanical Engineering Preferred Qualifications: 2-5 years of experience in Mechanical Engineering Experience in Inventor, AutoCAD, MS Office, and Adobe applications Experience in Engineering Documentation Revisions (Drawings, BOM"s, Manuals) Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Our award-winning client is looking to identify talented individuals for an Entry-Level Engineer for a leading manufacturer of products that serve a variety of industries including defense and aerospace. They are looking for a Mechanical or Aerospace Engineer with internship or project experience in design. Required Qualifications: A BS Degree in Mechanical or Aerospace Engineering. Intern or Project Engineering experience in Design - aerospace parts, automotive, or similar. Desire to learn and be mentored. Excellent communication skills with the ability to work and interact in a Team Setting. Connections to east central Illinois or a desire to live in the area.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Start Your Career with Purpose** Are you ready to apply your engineering education to real-world challenges? Caterpillar's Engineering Rotational Development Program (ERDP) is designed for entry-level professionals like you. Through rotational assignments, you'll continue developing your skills and knowledge-helping you achieve your career goals while contributing to Caterpillar's mission of delivering exceptional products, services, and technologies to our customers. Our Engineering Rotational Development Program is an entry-level program designed to build employees' skill sets within the discipline and continue growth, even after the successful completion of the program. This 12 to 18-month program provides practical experience across multiple engineering teams and technologies. It's more than just a job, it's a launchpad for your future at one of the world's leading manufacturers of construction and mining equipment. **What the Program Offers** As part of the ERDP, you'll rotate through different teams and projects that match your skills, knowledge, and abilities. You'll work on meaningful projects, connect with mentors, and get exposure to various areas of the company. Here are just a few paths you might explore: + **Product Design:** Design components and systems for Caterpillar products to meet customer needs. Collaborate with cross-functional teams throughout the value chain-from concept to production-to deliver effective solutions. + **Simulation/Performance Analysis:** CFD [Computational Fluid Dynamics] (ANSYS), FEA [Finite Element Analysis], 3D modelling, autonomy sensor and photorealistic environment root cause investigation, system/subsystem/component design optimization, structural dynamics, development and optimization of engine, aftertreatment, battery, fuel cell, powertrain, machine system performance, and/or autonomy and multiple machine coordination. + **Test/Validation/Hands-on:** Apply strong mechanical engineering understanding in a test/validation (hands-on) environment, troubleshooting issues, and collaborating with others for optimal results. + **Controls Development:** Develop/implement control system algorithms using Matlab/Simulink for various control systems including, but not limited to, engine controllers, machine implement controllers, as well as powertrain controllers. Will be responsible for understanding the feature requirement, implementing it, as well as testing it prior to a production rollout. + **Electronic Components:** Will be responsible for designing and testing various electronic control modules, as well as various electronic components. Will work with various internal Caterpillar clients to understand controller/component requirements, help design PCB [Printed Circuit Board] layouts, as well as perform digital/analog/power circuit analysis and testing. Other duties may include working with suppliers, testing the controllers/components in various environments, ensuring that FMEAs [Failure Mode and Effects Analysis] are conducted and documented to meet stringent Caterpillar quality requirements. + **Embedded Software Development:** Develop embedded software in C, C#, and/or C++ for various electronic control modules. Some examples of embedded software development applications include Datalink communications, inputs and outputs (sensors and actuators), speed calculation, injection/spark timing, memory management, CPU optimization, multi-core design and implementation, autonomy algorithms for perception, localization, planning, etc. In addition, some areas of work include developing scripts in Python/Visual Basic for automation. + **Software Validation/Verification for Electronic Systems:** Verify functionality of a feature or control system algorithm on a HIL [Hardware in the Loop] simulator bench or a SIL [Software in the Loop] system. Understand the requirements of the feature and/or the schematics of the controller/control system, verify functionality and debug/report anomalies to the development team, and help validate fixes. + **Engineering Data Analytics:** Ability to write and understand computer code, Python, analytics/data science experience, exposure to machine learning concepts/tools, engineering and statistics fundamentals. + **Process Engineering:** Apply mechanical, manufacturing, systems and/or industrial engineering knowledge to analyze and optimize an engineering process or processes. Will have the opportunity to leverage problem-solving and communication skills. **What You Have - Skills and Experiences** In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills: + Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities + Knowledge of engineering principles, theory, and engineering experience gained through projects, internships, and/or relevant work experience + Fundamental understanding of engineering for a manufacturing environment and the ability to design and implement materials, structures, machines, devices, systems, and processes that safely realize a desired objective or invention + Ability to manage multiple projects simultaneously and quickly acquire and apply new skills and knowledge + Collaborate with others of diverse cultures, interpersonal styles, and abilities + Strong written and verbal communication skills + Participate in and build on our inclusive, constructive, and productive work environment + Ensure all team members' contributions are recognized and valued + This position requires 12 months or less of professional experience in this field (excluding internships) **Program Qualifications** + ABET-accredited Bachelor's or Master's degree in Mechanical, Electrical, Computer, Agricultural, or Aerospace Engineering; Engineering Technology; or a related technical discipline (selected candidates must obtain their degree before they start) + Minimum cumulative GPA of 3.0/4.0 or higher (unrounded) + Willing to relocate and travel as needed **Top Candidates May Also Have** + Involvement with a campus design/competition team or related experience + Project or team leadership experience + Previous technical internship/co-op or relevant experience + Excellent interpersonal and communication skills + Intellectual curiosity, adaptability, and a willingness to learn by doing **Additional Information** + Please attach your resume and an unofficial copy of your transcript to your application + Applicants will be considered for positions throughout the United States + Most positions are based in **Peoria, Illinois** , with limited availability in other United States' locations + This is a **Monday through Friday, in-person opportunity** -perfect for building relationships, learning fast, and diving deep into your rotations + Sponsorship is **NOT** available for this position + Relocation is available to those who qualify + **2026 available start dates** - February 2, 2026; June 1, 2026; July 13, 2026; and August 3, 2026 (seats are limited for each start date) **Why Choose Caterpillar?** We're a values-driven company where you'll feel your work matters-whether you're optimizing machine performance, writing embedded code, or designing the next innovation in clean energy. You'll gain access to top-tier mentorship, technical resources, and real ownership of your work from day one. **Final Details** Please regularly check the email associated with your application-including your junk/spam folder-as this will be our primary method of communication. To check the status of your application, please visit our career website using the candidate login, as it will reflect any updates to your status. Interested applicants should explore our direct hire positions at ******************************* . For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. **Summary Pay Range:** $79,800.00 - $143,520.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** **Posting Dates:** January 5, 2026 - May 31, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

We are seeking a candidate for a key leadership role in scheduling for a portfolio of Data Center projects of strategic importance to Meta. The Schedule lead will act as a technical Schedule subject matter expert overseeing all schedule management and reporting for their portfolio of projects. The successful candidate will have focus on speed to market and be a critical partner for the Delivery Team and the Project Controls Lead to forecast and help mitigate schedule related risks and issues on the project, enable commercial accountability, manage schedule health reporting/escalation, and ensure that schedule change management is effective and expedient. Leadership, communication, and organization skills are a must in this highly collaborative, analytical, and strategic role. This position will work closely within the DEC Technical Operations team and various internal departments including Site Project Management teams, Pre-Construction, Contracts, Finance, Accounting, Sourcing and Operations Engineering. **Required Skills:** Area Schedule Lead - Data Center Design, Engineering and Construction Responsibilities: 1. Responsible for end to end schedule coordination and updates, including interface with risk management and pro-active communication of updates and alignment of variance root cause/commentary with Cross-functional partners 2. Identifies, documents, and communicates schedule risks through defined processes, including Risk Registers, health reviews, and New Build Program management meetings 3. Accountable for all aspects of vendor and Contractor schedule management 4. Accountable for Contractor baseline schedule development and evaluation during pre-con, including ensuring adherence to program guidance and specifications. Will lead efforts to optimize schedules for speed to market and successful on-time-delivery 5. Responsible for application of commercial entitlement for contractor Extensions Of Time (EOT) for their designated portfolio of projects. Provide leadership to site teams for Delay Tracking, EOT requests and claims. Responsible for making recommendations that are in line with contract and escalating when site decisions differ from the contractual or program guidance 6. Lead the identification and application of Proactive Risk Indicators in sub-area and ensure all risks are properly escalated to Health Reviews, and other appropriate forums. Lead ad-hoc schedule analysis to support program as required 7. Lead a small team of consultants (if required) to support effective schedule management for the designated portfolio of projects 8. Approximately 50% travel to other Data Center sites within the Area and home office **Minimum Qualifications:** Minimum Qualifications: 9. 10+ years of Planning, Scheduling, Construction Management, or Related field experience 10. Bachelor's degree in Engineering, Construction Management, or Equivalent Technical Field or related field experience 11. Subject Matter Expert in Primavera P6 and other scheduling related methodologies and software 12. Experience developing/managing an Owner's planning/scheduling program 13. Familiar with Data Center, Infrastructure or Construction programs requiring complicated commissioning specifications 14. Demonstrated analytical, communication, problem solving, prioritization, organization and reporting skills 15. Experience leading complex project or program planning and coordination amongst a large group of internal and external project stakeholders 16. Demonstrated experience developing and driving actions or operational adjustments based on schedule or project controls performance metrics 17. Demonstrated experience partnering with cross-functional teams to influence strategic direction **Preferred Qualifications:** Preferred Qualifications: 18. Experience identifying schedule efficiencies and driving programmatic or organizational alignment in changing execution strategies to optimize schedule performance 19. Experience negotiating schedule changes or complex construction claims 20. Successful development and implementation of scheduling or project controls strategies in a large organization 21. Familiar with complex networking systems and electrical infrastructure 22. Experience managing a team of Contingent Worker Schedulers **Public Compensation:** $150,000/year to $209,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Engineering Services Utilizing mechanical & plumbing design expertise, this position will be responsible for the design, development, review, and management of mechanically oriented projects for campus buildings. Produce and deliver engineering opinions, designs, technical decisions, recommendations, and documentation to F&S departments, campus, and other University units in conformance with applicable codes and University Facilities Standards. Provide the analysis, and development of mechanical project scopes for campus buildings. Designs and technical opinions are to provide safe, reliable, comfortable, productive, sustainable, and cost-effective facilities to support the Mission of the University. Provide support to other units. Support the Mission, Vision, Values, and Guiding Principles of Facilities and Services. DUTIES & RESPONSIBILITIES: PROJECT PLANNING ASSISTANCE Assist with project planning and program analysis phase for new construction and renovation projects to assist in the development of detailed technical scopes. Provide analysis of existing mechanical systems of campus buildings for condition assessment, operating capacity, functionality, compatibility with associated systems and use of spaces served under the supervision of licensed professional engineer. Establish, update, and meet project schedules. Note significant milestones and deadlines, potential construction conflicts, sequencing and phasing concerns and building/site accessibility. Estimate hours and duration required for tasks of self, technicians, and others involved in development of design, construction administration and project close-out. Manage work assignments, establish project priorities, and resolve design issues. Confer with Management Architects, Management Engineers, and Associate Director regarding resource needs and schedules. Develop weekly forecast of planned work and provide periodic project status reports. Update the design teammates and client routinely and upon changes in scope, schedule, budget, or status. Compare and incorporate results of previous projects and develop schedule and resource allocations required to meet needs of project and client. PROJECT DESIGN & DESIGN REVIEW Provide analysis of existing HVAC, Fire Protection and Plumbing systems of campus buildings for condition assessment, operating capacity, functionality, compatibility with associated systems and use of spaces served. Provide troubleshooting expertise for existing HVAC, fire protection, and plumbing systems that are not functioning properly to identify problems, determine appropriate resolution, and provide recommended corrective work in project program analysis format with clear definition of scope and probable costs. Provide detailed design documents (drawings and specifications) for construction projects for remodeling, renovation, repair, replacement, or new work. This includes all necessary engineering analysis, design and layout of HVAC, fire protection, plumbing systems, development of control sequences, points lists, schematics, and associated building automation control systems integration. Prepare and present reports, programs, displays, or drawings to management or staff as assigned. Provide detailed engineering analysis of Building HVAC Load and System Simulations using Trane Trace700, Carrier HAP, or other suitable software. Provide detailed review of projects designed by outside professional services consultants (PSC's) and in-house designers. Prepare written review comments for items not compliant with code or University Facilities Standards and for items not compatible, coordinated or acceptable for the proposed use. . May participate in formal or informal discussions concerning these comments. Provide assessment / analysis of existing mechanical, plumbing, and fire suppression systems of campus buildings for mechanical/plumbing operations, capacity, functionality, compatibility with associated systems and use of spaces served. Provide assessment of new technologies, equipment, and systems for mechanical & plumbing building elements and associated equipment in order to evaluate applicability and value to campus projects. Upon request, provide technical review & opinion on variance approval request forms submitted on projects. Utilize software and information resources available to the F&S Division. This includes the Microsoft Office (Teams, Word, Excel, Outlook, PowerPoint, etc.), AutoCAD, Bluebeam, AiM, the my.fs.illinois.edu Portal, SharePoint, and internet offerings. CONSTRUCTION & WARRANTY SUPPORT Provide review of HVAC construction submittals and testing verification on in-house designed projects and other projects as requested. Attend construction progress meetings as needed or by request. Provide technical support and on-site inspections as requested for the Commissioning & Inspection Group. Assist Lead Inspector and occupant with technical issues in-house designed projects during the warranty or post construction phase. CONTINUING EDUCATION Provide and/or attend training for professional development, technical topics, and team-building. Provide assessment of new technologies, equipment and systems for related HVAC, Fire Protection and Plumbing equipment to evaluate applicability to our projects and UIUC Facilities Standards. Prepare and present training sessions for staff for various topics as assigned. Maintain knowledge in current building codes, University Facilities Standards, State and Federal regulations, and restoration standards, energy codes needed to adequately meet the needs of the Engineering Services Department. SUPPORT TO OTHER UNITS & CAMPUS COMMITTEE ASSIGNMENTS Provide technical support to F&S Crafts and Trades for equipment selection, troubleshooting of building elements and system problems, development of preventive maintenance needs and answer technical questions. Provide technical support to Commissioning and Inspection group including shop drawing review, contract document interpretations, codes and standards interpretations, testing procedures and start-up. Provide technical engineering consultation to other Facilities & Services units and campus units. Provide Mechanical, Plumbing, and Fire Suppression expertise in support of Capital Programs/Deferred Maintenance, Engineering Services, Construction Services, Utilities and Engineering Services, Building Maintenance & Grounds, and other F&S Departments as well as campus units. Assist Capital Programs Planners and/or Project Managers in the preparation of project descriptions, preliminary budget and applicable scope of professional services required for each project as requested. Evaluate types of Feasibility Studies required to appropriately meet institutional requirements. Participate in the process for the selection of Professional Services Consultants, as assigned. Participate in focus groups, F&S and campus committees, and initiatives as assigned. OTHER DUTIES AS ASSIGNED Establish and maintain effective working relationships with other employees, faculty, staff, administration, professional consultants, and contractors. Provide support in the collaboration, development, and maintenance of the University Facilities Standards. Perform other duties and responsibilities as assigned. Physical Demands Walking : Occasionally Stairs : Occasionally Sitting : Occasionally Additional Physical Demands 1. Support the Mission, Vision, Values, and Guiding Principles of Facilities and Services. 2. Occasional field visits for projects in construction. Minimum Qualifications 1. Bachelor's or advanced degree in Mechanical Engineering or related field from an accredited institution. 2. Licensed Professional Engineer in the State of Illinois. 3. In-depth (five (5) years minimum) progressively responsible administrative experience in engineering design of HVAC. 4. Demonstrated knowledge & experience of building systems, including mechanical, electrical, plumbing, fire protection, and/or building automation and/or control systems. Preferred Qualifications 1. Advanced degree in Mechanical Engineering or related field from an accredited institution. 2. Seven (7) or more years of extensive design experience with large HVAC Central Systems. 3. Four (4) or more years of design experience with Plumbing, and Fire Suppression Systems and building automation systems with increasing responsibility of project development and management. 4. CEM, CEFP, LEED or additional certification in engineering, energy or facility management. 5. Experience using mechanical and plumbing equipment selection software. 6. Experience in Siemens and Schneider Electric I/A Building Automation Control Systems. Knowledge, Skills and Abilities * PREFERRED KNOWLEDGE, SKILLS, AND ABILITIES: * 1. Thorough knowledge of applicable building codes, standards, and regulations, including the International Building Code, International Mechanical Code, International Energy Conservation Code, and other applicable codes and standards. * 2. Thorough knowledge of air-side and complex energy recovery systems. * 3. Thorough knowledge of systems modeling and optimum system selection. * 4. Experience in energy modeling. * 5. Knowledge of laboratory HVAC design. * 6. Knowledge of laboratory gas design, laboratory piping and plumbing design, pneumatics, and fuel gas system design. * 7. Knowledge of applicable higher education standards, including University Facilities Standards. * 8. Solid trouble shooting skills for performance of building systems. * 9. Knowledge of building systems, including architectural, electrical, plumbing, fire suppression, and building automation and control systems. * 10. Thorough knowledge of CEM, CEFP, LEED, or additional certification programs in engineering, energy, or facility management. * 11. Moderate working skills with AutoCAD. * 12. Solid knowledge and Microsoft Office and Adobe products. * 13. Solid verbal and written communication skills. * 14. Solid technical writing ability. Appointment Information This is a 100% full-time Academic Professional position, appointed on a 12-month basis. The expected start date is as soon as possible after 1/26/2026. The budgeted Salary Range for this position is $100,000 to $115,000. Application Procedures & Deadline Information Applications must be received by 6:00 pm (Central Time) on 1/26/2026 (Extended). Apply for this position using the Apply Now button at the top or bottom of this posting. Applications not submitted through ************************* will not be considered. For further information about this specific position, please contact Ken McCray at ********************* or ************. For questions regarding the application process, please contact ************. The University of Illinois offers a very competitive benefits portfolio, depending on the position. Click for a complete list of Employee Benefits. The University of Illinois System is an equal opportunity employer, including but not limited to disability and/or veteran status, and complies with all applicable state and federal employment mandates. Please visit Required Employment Notices and Posters to view our non-discrimination statement and find additional information about required background checks, sexual harassment/misconduct disclosures, and employment eligibility review through E-Verify. Applicants with disabilities are encouraged to apply and may request a reasonable accommodation under the Americans with Disabilities Act (2008) to complete the application and/or interview process. Accommodations may also be requested on the basis of pregnancy, childbirth, and related conditions, or religion. Requests may be submitted through the reasonable accommodations portal, or by contacting the Accessibility & Accommodations Division of the Office for Access and Equity at ************, or by emailing accessibility@illinois.edu. Requisition ID: 1033775 Job Category: Professional Administration Apply at: *************************

The North America team is seeking a Design Engineer II for our Taylorville, IL facility to help shape the future of protein equipment. The Design Engineer will be responsible for the design and development of protein (swine and poultry) product lines. Your Impact Configure and design variations of current products to meet customer order requirements. Develop and document repeatable design procedures to ensure consistency, quality, and efficiency across product configurations. Supply accurate bills of materials (BOMs) to support farmers, customer service, manufacturing, and assembly. Create 3-D models and manufacturing/assembly drawings using Creo software. Collaborate with cross-functional teams to understand the Voice of the Customer and align designs with product requirements and cost targets. Analyze and identify risks related to customer needs, manufacturability, and project timelines. Perform design calculations and simulations to ensure product robustness and reliability. Coordinate and execute testing on concept and prototype builds to validate performance and safety. Supporting manufacturing and quality division of on-going production. Apply knowledge gained from prior product development efforts to guide new product introduction (NPI), continuous improvement, and field issue resolution. Your Experience and Qualifications Bachelor's degree in mechanical or agricultural engineering or a related technical field. Mechanical and technical aptitude with the ability to deliver innovative products. Solid modeling proficiency and understanding of mechanical design best practices, including experience with design documentation and structured development processes. A track record of contributing to or leading product development efforts, from concept through production release. Working knowledge of Microsoft Office (Outlook, Teams, Word, Azure DevOps, PowerPoint, and Excel). Five to ten years of experience in design or product engineering, sheet metal production, machining, and assembly. Creo and Windchill experience. Experience of airflow / ventilation a plus. Your Compensation and Benefits Expected annual salary for this role will be $70,000 - $90,000, plus a 7% bonus target. This is dependent upon job related knowledge, experience, and skills. Benefits will include the ability to elect health care and wellness plans, dental and vision plans, flexible and virtual work options (where available), 401(k) Savings Plan with company match, paid holidays, paid time off, health savings and flexible spending accounts, reimbursement for continuing education, life insurance, and other supplemental insurance plans. Your Workplace and Travel You will be working based in Taylorville, IL. There will be up to 5-10% of travel expected. We value inclusion and recognize the innovation a diverse workforce delivers to our farmers. Through our recruitment efforts, we are committed to building a team that includes a variety of experiences, backgrounds, cultures and perspectives. Join us as we bring agriculture into the future and apply now! Grain & Protein Technologies is proud to be an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing. 1. GPT Purpose: Feeding the World Better, through high quality grain and responsibly raised protein 2. GPT Mission: Make Farmers and Agribusiness Managers more productive and more profitable 3. GPT Culture: Winning Values and Winning Behaviors that nurtures a "Winners Win" culture of excellence 4. GPT Approach: Achieve balanced and sustainable success for Employees, Customers, and OwnersGrain & Protein Technologies is a leading global designer, manufacturer, and marketer of reliable, durable, and innovative equipment solutions for grain, seed, poultry, egg, and swine production. Generating $1.1 billion in annual revenue, the Company serves farmers and agribusiness managers in over 100 countries and currently operates 19 manufacturing facilities across 5 continents, employing more than 3600 people. The Company goes to market with its strong portfolio of industry leading brands - GSI, Cumberland, AP, Tecno, Cimbria, Aerotech, Reventa, and Euroemme. With its Company Purpose of "Feeding the World Better", Grain & Protein Technologies emphasizes advancing smart technologies and offering innovative technical solutions to make farmers and agribusiness managers more productive and profitable in a sustainable way.

The North America team is seeking a Design Engineer II for our Taylorville, IL facility to help shape the future of protein equipment. The Design Engineer will be responsible for the design and development of protein (swine and poultry) product lines. Your Impact Configure and design variations of current products to meet customer order requirements. Develop and document repeatable design procedures to ensure consistency, quality, and efficiency across product configurations. Supply accurate bills of materials (BOMs) to support farmers, customer service, manufacturing, and assembly. Create 3-D models and manufacturing/assembly drawings using Creo software. Collaborate with cross-functional teams to understand the Voice of the Customer and align designs with product requirements and cost targets. Analyze and identify risks related to customer needs, manufacturability, and project timelines. Perform design calculations and simulations to ensure product robustness and reliability. Coordinate and execute testing on concept and prototype builds to validate performance and safety. Supporting manufacturing and quality division of on-going production. Apply knowledge gained from prior product development efforts to guide new product introduction (NPI), continuous improvement, and field issue resolution. Your Experience and Qualifications Bachelor's degree in mechanical or agricultural engineering or a related technical field. Mechanical and technical aptitude with the ability to deliver innovative products. Solid modeling proficiency and understanding of mechanical design best practices, including experience with design documentation and structured development processes. A track record of contributing to or leading product development efforts, from concept through production release. Working knowledge of Microsoft Office (Outlook, Teams, Word, Azure DevOps, PowerPoint, and Excel). Five to ten years of experience in design or product engineering, sheet metal production, machining, and assembly. Creo and Windchill experience. Experience of airflow / ventilation a plus. Your Compensation and Benefits Expected annual salary for this role will be $70,000 - $90,000, plus a 7% bonus target. This is dependent upon job related knowledge, experience, and skills. Benefits will include the ability to elect health care and wellness plans, dental and vision plans, flexible and virtual work options (where available), 401(k) Savings Plan with company match, paid holidays, paid time off, health savings and flexible spending accounts, reimbursement for continuing education, life insurance, and other supplemental insurance plans. Your Workplace and Travel You will be working based in Taylorville, IL. There will be up to 5-10% of travel expected. We value inclusion and recognize the innovation a diverse workforce delivers to our farmers. Through our recruitment efforts, we are committed to building a team that includes a variety of experiences, backgrounds, cultures and perspectives. Join us as we bring agriculture into the future and apply now! Grain & Protein Technologies is proud to be an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing. 1. GPT Purpose: Feeding the World Better, through high quality grain and responsibly raised protein 2. GPT Mission: Make Farmers and Agribusiness Managers more productive and more profitable 3. GPT Culture: Winning Values and Winning Behaviors that nurtures a “Winners Win” culture of excellence 4. GPT Approach: Achieve balanced and sustainable success for Employees, Customers, and Owners

Consider our Product Development Engineer* role if you enjoy finding creative solutions and working with cross functional teams to meet short- and long-term goals. You'll be involved from idea generation to full production implementation resulting in a rewarding and career building experience. * Please note, we are not able to consider candidates who currently or in the future will require VISA sponsorship. Hydro-Gear is a world leader in the design and production of precision drive solutions, serving multiple industries and delivering to customers worldwide. Our passion is innovation and a commitment to making our customers successful. Learn more about us at Hydro-Gear.com. Benefits: For Benefits and Pay Range ***************************************************************************** Our Product Development Engineer will * Research, design, development and process in support of existing or new products * React and implement changes quickly to meet customer requirements * Apply various mechanical engineering principles to product applications * Process customer and in-house engineering change requests * Use CAD programs to develop concepts and designs * Assemble and evaluate performance of prototype hardware * Assist with reliability test programs * Be instrumental in cost avoidance and cost reduction activities We're looking for someone who is self-motivated, driven and excited to continually find improvements and who have * Bachelor's degree (B.S.) in Engineering and 2 or more year's related experience and /or training * 2 to 5 years related industry product and design engineering experience * Experience working with NX or other 3D modeling systems * Lean manufacturing experience (is a plus) * Bachelor's degree (B.S.) in Engineering and 2 or more year's related experience and /or training

Full-time Description Company Background TCCI Manufacturing is a world leader in compressor technology for commercial vehicles, automotive, and same-day delivery vehicles. Our global footprint spans 10 locations across the US, China, India, Germany, UK, Ireland, Spain, and Mexico-employing more than 650 employees worldwide. TCCI has become one of the leading global Electric Compressor (EC) Manufacturers for the commercial & heavy-duty sectors, as well as automotive specialty vehicle markets. As we look to the future, we will pioneer technology in electrification and support our customers' plans for a full electrification solution that includes vehicle production, charging, route planning, and infrastructure. Role Overview: The Manufacturing Engineer will be responsible for developing, optimizing, and supporting CNC machining processes, including programming and optimizing milling and lathe operations. This role ensures efficient production, high-quality standards, and continuous improvement in a fast-paced manufacturing environment. Key Responsibilities: Process Development & Optimization Design and implement CNC machining processes for new and existing products. Participate cross-functionally with Quality and lead department-specific APQP actions as required, including product validation. Select appropriate tooling, fixtures, and cutting parameters for milling and lathe operations. Develop and maintain CNC programs using CAD/CAM software. Continuous Improvement Analyze production data to identify opportunities for cycle time reduction and cost savings. Implement lean manufacturing principles and Six Sigma methodologies. Quality Assurance Ensure compliance with dimensional tolerances and surface finish requirements. Collaborate with the Quality team to resolve machining-related issues and improve inspection processes. Equipment & Maintenance Support installation, setup, and troubleshooting of CNC machines. Recommend upgrades or replacements for tooling and equipment. Documentation & Training Create and maintain process documentation, work instructions, and setup sheets. Train operators and technicians on best practices for CNC machining. Requirements Key Qualifications: Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. Experience: 3+ years in CNC machining environment (milling and lathe operations). Proficiency in CAD/CAM software (e.g., Mastercam, SolidWorks). Experience with Milling and Lathe Operations. Skills: CNC Programming (Fanuc, Siemens) Lean Manufacturing & Six Sigma Tooling Design and Selection CAD/CAM (SolidWorks, Mastercam) Process Validation & PPAP Strong knowledge of G-code programming and CNC controls. Understanding and use of GD&T, material properties, and cutting tool technology. Excellent problem-solving and analytical skills. Process Documentation & Work Instructions. Quality Control & Inspection Tools, including CMM. Basic PLC Programming. Design and creation of custom fixtures for complex parts. Ability to lead cross-functional teams for new product introduction. Ability to create training documentation and conduct technical training to employees with varying degrees of experience. Preferred Qualifications 5-8 Years of experience in a production environment. Experience with automation and robotic integration. Familiarity with G&M Code, Modeling Softwares Knowledge of ISO 9001 or AS9100 standards. Physical Requirements Ability to work in a manufacturing environment with exposure to noise, oils, and moving machinery. Occasional lifting of up to 50 lbs. Salary Description $85,000 - $100,000 annually

Innovative Staff Solutions has a direct hire opportunity for a Design Engineer with our client located in the Mattoon, IL. area! Our client has been in business for over 150+ years and is one of the world's largest turbocharger manufacturers. This position requires strong critical thinking skills and working in a collaborative team environment. POSITION SUMMARY To design and document turbochargers and their components as produced or marketed. This includes the creation of original designs, as well as those received. PRINCIPLE DUTIES AND RESPONSIBILITIES Creation of original drawings of turbochargers and their components using a Prints with GD via 3D Solid Modeling CAD Programming and 2D print with GD&T Adapt existing designs from company to current customer needs Redraw original designs using U.S. formats and specifications Assign all part numbers for production and prototype parts; maintain a log of all part numbers and assemblies Receive and catalog all technical materials, drawings, and specifications in conjunction with the liaison engineer Assign engineering change request numbers. Keep and maintain a log of all proposed changes Generate engineering release notices and change notices Provide drawings as required for concept turbochargers and their installation Maintain all Computer systems, assist all employees with computer training 1Understand GD&T and be able to apply it Accountable for assigning part numbers, ECR numbers, EWR numbers, preparation of design drawings and CAD files, filing and cataloging of drawings and technical materials Utilize geometric tolerancing of parts and use judgment in interpreting engineer's instructions per EWR's and ECR's Interface with other departments to communicate design intent and continuous improvement ideas Comply with all safety rules, policies and procedures, including wearing the required personal protective equipment (PPE) and report any defective PPE REQUIREMENTS High school diploma, associate's degree preferred 5 or more years CAD experience; 2D and 3D preferred using SolidWorks or NX Be able to lift and or move up to 50 lbs. Ability to wear proper safety gear/PPE as needed Repetitive standing, bending, turning, and twisting for extended periods of time Must be able to pass drug/alcohol test and background screen Use of both hands, arms, and shoulders (full range of motion)

ARi, headquartered in East Peoria, IL, USA, is a rapidly expanding global engineering enterprise. The essence of our “i” symbolizes our distinctiveness from competitors - an embodiment of innovation, intelligence, ingenuity, and insight. Boasting a diverse team of over 1,500 engineering experts hailing from various nations and cultures across the globe, we are excellently poised to provide intricate and personalized resolutions to our esteemed clients. Duties/Responsibilities: Review process to gather and document requirements. Access information from the Product Support systems including failure analysis. Conduct data analysis. Understand the role of hydraulic filtration and system ISO cleanliness. Recognize the differences in hydraulic fluids, compatibility, temperature-viscosity selection. Perform or be able to interpret system CFD and/or hydraulic simulation modeling results. Intro to integration team when placing components - ensure lines routings best practices are understood. Access components and machine models, approve drawing releases, reassign drawing design control ownership, create new part numbers. Work with the releasing team, submitting drawings and 3D models. Publishing 3D models prior to drawing releases to allow systems to confirm proper fit up. Hands on inspection of returned hardware such as new components, field failures, etc. Education & Experience Required: Bachelor's degree in an accredited Engineering curriculum preferred. 3+ years of relevant work experience Required Skills: Working knowledge of hydraulic components or systems Strong analytical and problem-solving skills Ability to read and interpret engineering drawings and hydraulic schematics. Desired Skills: Working knowledge of hydraulic pumps and motors strongly desired Experience with databases, Microsoft Teams, SharePoint, and Apps desired The Benefits of Working at ARi At ARi, our commitment to our employees goes beyond the workplace, ensuring comprehensive benefits. From day one, full-time employees enjoy group health, dental, and life insurance coverage. Additionally, vision coverage is accessible starting the following month. Recognizing the significance of rejuvenation, we provide paid time off, sick days, company holidays, and maternity/paternity leave to our full-time staff. In times of loss, we also offer bereavement support. Furthermore, a 401(k) program is maintained for eligible employees. #LI-AA1

MSA has an opportunity for a Project Engineer Public Works at our Champaign, IL office. As a licensed engineer (PE), this position primarily supports local municipal engineering clients/projects. This position is Flex Time eligible, and hybrid working arrangements are possible. Flex Time is a benefit for salaried staff that recognizes when you work over 40 hours in a week, in addition to your standard PTO (for example: work 42 hours this week, have 2 hours of Flex Time to use as future time off). Who we are & how we help What does it mean to serve communities for over 100 years? It means doing the type of work that helps people raise a family, grow a business, engage with their neighbors, and enjoy a variety of unique, enduring spaces that form the fabric of “home.” MSA's roots reach back to 1919. What began with an entrepreneurial solo practitioner in Baraboo, Wisconsin, has grown into a robust and thriving company of over 400 employee owners conducting work across the country. As a 100% employee-owned firm, when we say we “own” our work, we mean it. We stand behind the quality of our designs, the integrity of our people, and the generations of client relationships we've formed based on trust, firm handshakes, and the belief that together - we can accomplish anything. Commitment to DEIB MSA seeks to provide a workplace where everyone can feel secure in bringing their authentic selves to work, where opportunities to learn and succeed are afforded to all, and in which diversity of perspective leads to an innovative and successful employee-owned firm. Responsibilities The work you will do Client relations including attendance at client meetings and interaction with existing and new clients Project management including project planning, scoping, budgeting and QA/QC Design and administration of construction on infrastructure projects Project experience in potable water, storm water and wastewater projects among more Assist with mentoring junior engineering staff Preparation of plans, details, specifications, and bidding documents Preparation of technical reports and regulatory permits for projects Qualifications What you bring Skills & Knowledge / Education & Experience: Bachelor's degree in Civil Engineering (or related) required 4+ years of prior experience within the Public Works market, serving multiple clients required PE license required, IL PE preferred. Experience in managing multiple projects and client needs required Extensive knowledge of regulations and requirements within Wisconsin preferred Experience with funding and grants available to municipalities preferred This position requires you to have authorization to work in the United States for any employer. We will not provide sponsorship for this position. The salary for this position ranges from $79,081 to $126,529 per year commensurate with experience. Higher compensation within this range will be paid to candidates with significant experience and exceptional qualifications. Benefits Why MSA? We're glad you asked! Better Together - A collaborative work environment that promotes open doors, new ideas and honest opinions. Multi-disciplinary Opportunities - As multi-talented people in a multi-disciplinary firm, we encourage everyone to follow their interests, seek new experiences and apply their skills where they feel most impactful. We've Got Your Back - Support when you need it, independence when you don't. We're 400+ team members strong, operating as one cohesive MSA. Passion & Purpose - We're passionate about what we do and proud of it! Join us to share inspirations, “geek out” and think big. Pay & Perks - We offer competitive industry pay and a variety of perks - just a few of the things that make us uniquely MSA. Communities of Practice - Our CoPs are our company think tanks and idea generators, the perfect means to regularly share, collaborate and learn together. Work-Life Integration - Life doesn't stop when the work day begins. MSA supports our employees as professionals, parents, citizens and friends - with the understanding and flexibility to meet your obligations and balance your time. Commitment to Learning - We support the professional aspirations of our employees with ongoing training options, tuition reimbursement opportunities, and the technology to keep us connected, creative and competitive. Community Engagement - We give back to the communities in which we live, work and play. MSA employee owners are volunteers, educators, STEM outreach participants and event attendees, supported by dedicated corporate sponsorship and donations initiatives. There's more! Eligible employees will also enjoy the following benefits: Quality Insurance Options - Medical, dental and vision coverage for you, your spouse or domestic partner and eligible dependents Paid Time Off - All full-time employees will receive, at minimum, 17 days (that's 3+ weeks!) of paid time off in the first year alone. Paid Holidays - MSA offers time off pay for 8 holidays in every calendar year. Paid Parental Leave - Both parents will receive 2 weeks of paid time off and birth parents are eligible for additional paid time off under MSA's Short Term Paid Leave. The paid 2 weeks of time also applies to adoption and foster care placement. Supplemental Insurance - MSA pays 100% for all employees to have life insurance, long-term disability insurance and short-term disability insurance. Employee Stock Ownership Plan (ESOP) - MSA is an ESOP S-Corporation, which means that our company is 100% owned by us! Through the ESOP, eligible employees receive MSA stock in the form of company shares as a percentage of compensation, at no cost to the employee. 401k Retirement Savings Plan - Employees can also choose to participate in a 401k plan, with a generous employer match that is immediately 100% vested. Short Term Incentive (STIP) - This program rewards employees who meet performance goals with a one-time annual STIP payment as a percentage of their eligible compensation - recognition of individual accomplishments and achieving organizational goals. STIP payments are awarded if MSA reaches its corporate financial plan for the year. MSA is an equal opportunity/affirmative action employer that is committed to diversity and inclusion in the workplace. At MSA, we value a diverse, inclusive workforce and we provide equal employment opportunity for all applicants and employees. All qualified applicants for employment will be considered without regard to an individual's race, color, sex, gender identity, gender expression, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other basis protected by federal, state or local laws. If you are unable to submit your application because of incompatible assistive technology or a disability, please contact us at ************* Equal Employment Opportunity/Affirmative Action Employer Benefits We can recommend jobs specifically for you! Click here to get started.

Job DescriptionSalary: Product Engineer/Production Test Engineer At Smartz Inc, we rely on our dynamic team of engineers to solve the many challenges and puzzles that come with integrating IoT smart devices. We are seeking a product engineer who is ready to work with new technologies and architectures in a forward-thinking organization thats always pushing boundaries. You will assist in creating product requirements and you will test hardware integration of Internet of Things products. You will take a customer-centric approach to champion product features, functionality and experience and play a key role in the product development phases by collaborating with cross functional teams and stakeholders. About Us Smartz was founded in June of 2021 by Dr. Kevin Wan, who has been a successful entrepreneur in the smart home industry for more than 10 years. Our team at Smartz wants to disrupt the PropTech Industry by providing advanced AI software that is compatible with industry-leading smart home devices and will provide property owners and tenants with an all-in-one solution to all of their property management needs. Our team uses the latest mobile technologies for all features of Smartz apps, which include live video streaming/recording, motion/sound alerts, AI-powered object detection, video access sharing functions, etc. We always strive to develop innovative features to create secure and smart device management experiences for our users and business partners. Job Type Full-time (Champaign, IL) Job Responsibilities Understand the hardware and software vision and roadmap for Internet of Things products Own post release product quality by solving top engineering issues together with developers Help hardware and software testing to improve quality before official release Work closely with Technical Support team to classify and prioritize customer issues Take tech support escalation as needed Proactively define/build product metrics to identify issues Build tools/processes which can easily propagate for new Smartz products Schedule product release plan for App, Cloud, and firmware for Smartz Communicate project plan, priority, and schedule to internal teams and partners Work as QA to assure every release meets predefined quality bar Improve release processes. Utilize external tools as appropriate Continually work towards making improvements in QA and release process Demonstrates teamwork and values that foster a positive team culture Technical Skills Requirements 2+years experience in IT, Network, QA, device/system installation or relevant technology field Passionate about Smart Home and IoT devices Strong problem-solving skill with a hands-on approach Excellent internal and external communication skill Understanding of Systems development life cycle and agile development Experience & Qualifications Bachelors degree in Network, IT, security systems, or related technology field preferred Benefits Company paid Medical, Dental, Vision, and Life insurance Retirement and savings plan with company match Unlimited PTO Smartzs commitment to diversity and inclusion is one we strive to cultivate continuously. We aim to provide everyone, regardless of identity, a space where they can grow and feel seen as a person first. These are more than just words to us; they are guidelines for how we build and foster our team, our leaders, and the core culture of our company. We are also an equal opportunity employer that does not discriminate based on any protected attribute, including race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, marital or veteran status, pregnancy or disability, or any other basis protected under applicable law. In accordance with the law, we make reasonable

Job Description Growing firm with offices in multiple states is seeking an I & C Designer/Engineer for their team in Champaign! Responsibilities: Responsible for design, development, and implementation of control systems for water/wastewater treatment facilities Work closely with multidisciplinary engineering teams to ensure all systems meet the required specifications/quality standards Create electrical drawings/schematics using AutoCAD Ensure all projects meet safety and quality standards Requirements: Bachelor's degree in electrical engineering, automation, or a related field 5+ years of experience in designing/implementing control systems Proficient in AutoCAD Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! *********************************** ************

Headquartered in Dublin, Ohio, Cardinal Health, Inc. (NYSE: CAH) is a global, integrated healthcare services and products company connecting patients, providers, payers, pharmacists and manufacturers for integrated care coordination and better patient management. Backed by nearly 100 years of experience, with more than 50,000 employees in nearly 60 countries, Cardinal Health ranks among the top 20 on the Fortune 500. **_What Application Development & Maintenance contributes to Cardinal Health_** Information Technology oversees the effective development, delivery, and operation of computing and information services. This function anticipates, plans, and delivers Information Technology solutions and strategies that enable operations and drive business value. Application Development & Maintenance performs configuration or coding to develop, enhance and sustain the organization's software systems in a cross-functional team environment through adherence to established design control processes and good engineering practices. This job family programs and configures end user applications, systems, databases, and websites to achieve the organization's internal needs and externally facing business needs. Application Development & Maintenance partners with business leaders, investigates user needs and conducts regular assessments, maintenance, and enhancements of existing applications. We are seeking a highly skilled and experienced Senior SAP Platform Engineer to join our team. This role is a unique blend of deep technical expertise, strategic planning, and leadership. You will be responsible for the stability, performance, and continuous improvement of our SAP platforms, with a strong focus on emerging technologies like SAP BTP and BRIM. You will also provide critical support for our existing legacy systems like PI/PO and Portal as we plan their migration. The ideal candidate will be able to manage a diverse landscape that includes ECC, S/4HANA, and RISE, lead and mentor offshore resources, and provide robust data lifecycle management through advanced archiving strategies. **_Responsibilities:_** + Support our SAP platforms and ensure that we leverage the power of technology to its full potential. + Analyze and troubleshoot technical issues and develop and deliver solutions based on system analysis and user requirements. + Monitor system performance and identify opportunities for improvement while staying up to date with the latest technological trends and industry standards. + Work with a variety of integration patterns, including synchronous and asynchronous messaging, REST APIs, SOAP web services, and event-driven architectures. + Support existing and/or future ASAPIO and BTP implementations. + Support SAP Data Lifecycle Management (DLM) including archiving, data purging, and related tools and processes. + Support the successful scaling of our current SAP CI/CD initiatives to optimize the experience and productivity of developers and other users. + Provide engineering support for large projects. + Support and maintain the existing implementations of PO, Portal, NWDI, Biller Direct and XREF. **_What is expected of you and others at this level_** + Applies advanced knowledge and understanding of concepts, principles, and technical capabilities to manage a wide variety of projects. + Participates in the development of policies and procedures to achieve specific goals. + Recommends new practices, processes, metrics, or models. + Works on or may lead complex projects of large scope. + Develops technical solutions to a wide range of difficult problems. Solutions are innovative and consistent with organization objectives. + Excellent problem-solving and analytical skills. + Effective communication and collaboration skills to work effectively with cross-functional teams. + Ability to work independently and manage multiple priorities in a demanding environment. + Acts as a mentor to less experienced colleagues. **_Qualifications_** + Bachelor's degree in related field preferred, or equivalent work experience, preferred. + 8-12 years of experience preferred. + Strong SAP ABAP and other SAP Application Development experience. + Experience in Java development. + Solid grasp of SAP technical architectures. + Strong understanding of common integration protocols and technologies such as REST, SOAP, OData, IDoc, and RFC. + Experience with API Management concepts and tools. + Experience with PO, Portal, NWDI, and ASAPIO. + Experience with SAP running in the cloud, especially Google Cloud. + Experience with SAP archiving. + An understanding of SAP S/4HANA and UI5. + Experience in Fiori and Workflow development across SAP modules is a plus. + Experience with Middleware and/or SAP Integration Suite (on BTP) is a plus. + SAP functional experience, especially in SAP BRIM, is a plus. **Anticipated salary range:** $123,400.00 - $176,300.00 **Bonus eligible:** Yes **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/15/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Who Are We? Nestled in the heartland, DICKEY-john is at the center of the agricultural marketplace. With more than 60 years of helping farmers produce higher yields to feed the world, DICKEY-john is proud of our heritage and our contributions. As a part of the TSI Incorporated family, DICKEY-john employees also provide support for TSI solutions. TSI's vision to create a better world by helping to protect people, products and the environment is seen and experienced at all facilities, including our Auburn, Illinois DICKEY-john facility. Manufacturing Engineer I at TSI Provides support and problem resolution to the production floor. Plan, document and implement production methods and processes to facilitate the timely and efficient manufacture of quality products. Review new product designs to ensure the products are manufacturable and cost effective. Coordinate, as part of a project team, the introduction of new products to the production floor. What Will You Do? In order to grow and build a successful career with TSI, you will be responsible for: * Production floor support/problem resolution and methods engineering * Make suggestions and incorporate changes to improve the workflow in the assigned value streams. * Communicate effectively with personnel from widely varied backgrounds * New product review, coordination and introduction to the production floor * Establish and document efficient manufacturing processes / methods using but not limited to Bills of Materials, Routings, Visual Work Instructions, PFMEA's, ECO's and Control Plans * Ability to read complex schematics, blueprints, CAD drawings * Fixture and tooling design and improvements * Participate on cross-functional project teams that require coordinating with staff from engineering, quality, production, and purchasing * Personal and professional integrity * Cost analysis * Cost reduction and avoidance * Introduce and maintain best practices on the manufacturing floor including Lean Manufacturing, and 5S. * Training of production personnel * Work on multiple assignments concurrently and prioritize based on importance and urgency * Ability to employ sound judgment with little or no supervision * Ability to proficiently use Microsoft Office tools, SAP, and be a resource for others * Completes other assignments requested What Do You Need? Required * Bachelor of Science in an Engineering or technical related field required. * 0-2 years of experience. Desired * Bachelor of Science in Industrial or Manufacturing Engineering. * 1 year of experience. What Can We Give You? At TSI, our employees are our most valuable assets, and we care about their health and happiness. We offer a competitive benefits program to keep our employees and their family members protected and foster a healthy work-life balance. Additionally, we are committed to employee development and growth, and encourage and foster an environment of collaboration, and innovation. Our work has meaning and the products we design and build help protect people and the environment. Dress for your day: We want our employees to be comfortable at work and we know they are more productive when they're comfortable. The dress for your day policy allows employees' discretion to select appropriate dress for the business of each workday. Free Beverages/On-site Cafeterias: Enjoy complimentary coffee, tea and hot chocolate each day at work. We also have a large cafeteria employees can eat lunch in, as well as an outside patio area that employees can enjoy during the summer months. Pay & Benefits: Competitive market salary from $70,000 - $80,000 per year* depending on qualifications and experience. For eligible Leadership and individual contributor roles, additional bonus opportunities may be available and awarded at the discretion of the Company. Benefits: * Health Insurance: Comprehensive medical, dental, and vision coverage. * Retirement Plan: 401(k) with company match. * Paid Time Off Program: Paid time off, paid holidays, and paid floating holidays. * Other Benefits: Life insurance, employee assistance program (EAP), and professional development opportunities. * Pay amount does not guarantee employment for any particular period of time. Legal authorization to work in the United States without the need for sponsorship. We require proof of eligibility to work in the United States. EOE/Vet/Disability DICKEY-john manufactures monitors, controllers, moisture testers, ground speed sensors, and a variety of other systems used in agricultural, public works, and analytical markets. Customers range from individual farmers to original equipment manufacturers (OEMs). No matter what the size, the expectations are the same: a cost-effective, technologically advanced, precision product. Visit our products at ****************************