Mechanical engineer jobs in Hampton, VA - 504 jobs

Merrick is seeking an experienced Mechanical Engineer to join our Energy, Manufacturing & Bioprocessing Business Unit. This full time, direct hire position, will be responsible for engineering, design, coordination, client communications and associated construction administration. This position will be located in our Newport News, VA or Richmond, VA offices. As a Senior Mechanical Engineer with our Energy, Manufacturing & Bioprocessing team, you will work in a dynamic multi-discipline environment with other engineering and technical personnel to ensure overall project goals are met. A hybrid work schedule will be supported. Annual salary range for this position is $102,400 - $132,600. Pay offered may vary depending on job related knowledge, skills, and experience. WHAT YOU'LL DO * Apply your knowledge in Food & Personal Care, Bioprocessing, Oil & Gas, Chemical, Power, Manufacturing and Industrial and shipbuilding facilities/systems (Conceptual Design). * Ensure understanding and compliance with owner's requirements of the facility or corporate standards related to mechanical design. * Confirm and review applicable codes and standards such as, but not limited to, the IBC, ASME, API, PIP and NFPA. * Establish and document the mechanical systems basis of design and in doing so provide clarification, qualifications and design assumptions regarding relevant design issues. * Develop scopes of work based on RFPs and pre-bid meetings with clients. * Work with owner and construction management team to validate construction cost and provide value-engineering options as necessary. * Interpret scopes-of-work and translate them into executable project plans. * Manage project mechanical engineering and design team and oversee all aspects of the mechanical scope related primarily to equipment and piping. * Perform and document engineering calculations related to mechanical engineering for the purpose of selecting code compliant systems and equipment. * Perform sizing and selection of equipment and systems. * Oversee piping group activities related to mechanical equipment, piping and 3D modeling to support mechanical deliverables. * Perform pipe stress analysis utilizing software such as CAESAR II, NozzlePro, etc. * Work with the project team to design a cohesive, technically acceptable, and optimized piping system. * Perform detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents. * Mentor other mechanical engineers and designers. * Construction Support: * Contribute to the preparation of construction documents including drawings, specifications, calculations, and equipment datasheets. * Oversee problem solving efforts for field oversights and addressing RFI's. * Perform field inspections and review of reports. * Work with Project Engineer/Manager to ensure that project schedule will be met, and complete documents provided for each deliverable. REQUIRED QUALIFICATIONS * Bachelor's degree in mechanical engineering from ABET accredited program required. * Eight (8)+ years industry experience. * Registered Professional Engineer or ability to obtain your PE within the first year of employment. * Experience with Design/Build and EPC projects. * Experience leading teams of engineers on design projects. * Client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * Pipe stress analysis experience utilizing software such as CAESAR II. * Significant experience designing and installing retrofits and upgrades at manufacturing, industrial, and shipbuilding facilities. * HVAC and plumbing design for industrial facilities. * Knowledge of ASME B31.3 and B31.1, ASME Boiler & Pressure Vessel codes, PIP and API codes. * Experience in managing personnel and project engineering. PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Bachelor's degree in mechanical engineering from ABET accredited program required. * Eight (8)+ years industry experience. * Registered Professional Engineer or ability to obtain your PE within the first year of employment. * Experience with Design/Build and EPC projects. * Experience leading teams of engineers on design projects. * Client projects for this position require U.S. Citizenship. * Apply your knowledge in Food & Personal Care, Bioprocessing, Oil & Gas, Chemical, Power, Manufacturing and Industrial and shipbuilding facilities/systems (Conceptual Design). * Ensure understanding and compliance with owner's requirements of the facility or corporate standards related to mechanical design. * Confirm and review applicable codes and standards such as, but not limited to, the IBC, ASME, API, PIP and NFPA. * Establish and document the mechanical systems basis of design and in doing so provide clarification, qualifications and design assumptions regarding relevant design issues. * Develop scopes of work based on RFPs and pre-bid meetings with clients. * Work with owner and construction management team to validate construction cost and provide value-engineering options as necessary. * Interpret scopes-of-work and translate them into executable project plans. * Manage project mechanical engineering and design team and oversee all aspects of the mechanical scope related primarily to equipment and piping. * Perform and document engineering calculations related to mechanical engineering for the purpose of selecting code compliant systems and equipment. * Perform sizing and selection of equipment and systems. * Oversee piping group activities related to mechanical equipment, piping and 3D modeling to support mechanical deliverables. * Perform pipe stress analysis utilizing software such as CAESAR II, NozzlePro, etc. * Work with the project team to design a cohesive, technically acceptable, and optimized piping system. * Perform detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents. * Mentor other mechanical engineers and designers. * Construction Support: * Contribute to the preparation of construction documents including drawings, specifications, calculations, and equipment datasheets. * Oversee problem solving efforts for field oversights and addressing RFI's. * Perform field inspections and review of reports. * Work with Project Engineer/Manager to ensure that project schedule will be met, and complete documents provided for each deliverable.

Team: E35 SUBMARINE ENGINEERING - ADVANCED CAPABILITIES Entity: Newport News Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: Yes, up to 10% of the time Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. The AUKUS SSNA Program is seeking a strong engineer to support the development of the next generation of fast attack submarines. This position will be responsible for working collaboratively with other key stakeholders throughout the SSNA program and will interface with UK's BAE Systems integrated delivery teams (IDTs) to help design portions of the UK and Australian SSNA nuclear-powered submarine. The engineer will need to: · Engage with shipyards, customers and other stakeholders to collect feedback for design incorporation. · Have flexibility with work assignments and may perform duties outside of traditional discipline work scope. · Work with multi-discipline teams on incorporation of SSNA design principles · Solve complex spatial integration issues while meeting system and overall ship requirements · Be able to effectively communicate with both internal leadership and external customer(s). · Be prepared to work in a collaborative and fast-paced environment. · The position will requires individuals who are able to adapt and adjust to support objectives. Must Have Bachelor's Degree and 9 years of relevant exempt experience; Master's Degree and 7 years of relevant professional experience; Ph.D. and 4 years of experience. Newport News Shipbuilding requires a Bachelor's Degree in engineering from an ABET accredited program. Nice to Have • Strong technical background with a comprehensive knowledge of the engineering and design process related to mechanical systems from the concept stage through ship integration. • Team facilitator and innovator, helping to inspire creative solutions to challenging design goals. • Strong communication skills, both written and verbal, to support the development and presentation of technical reports and briefs to NNS leadership or the Navy, and coordinating with vendors and industry partners. • Knowledge of submarine mechanical systems and how they interface with structural, electrical, and other mechanical systems. • An understanding of an array of mechanical products, such as hydraulic and electric actuators, linkages/cam-sliders, pumps and valves, HVAC systems, structural weldments, welded or fastened joints, and others. • Experience in traditional and computer-based methodologies for the design and analysis of components. • The ability to foster a collaborative and inclusive team culture within a diverse set of team members and stakeholders. • Exhibit an openness to continuous learning and development in a dynamic environment. • Operational experience on commissioned or under construction Navy vessels is a plus. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #2 for Newport News Shipbuilding.

is required to be on-site, in Evansville, Indiana, Monday through Friday. . Applicants must be eligible to work in the United States without visa sponsorship now or in the future. Frontier-Kemper, a Tutor Perini Company, is seeking an Mechanical Engineering Manager for our home office in Evansville, Indiana. About Frontier-Kemper Excellence in Underground and Heavy Civil Construction At Frontier-Kemper, we specialize in heavy civil construction and underground mine development. We are known for our expertise in the engineering and construction of deep shafts and tunnels of all sizes and complexity. Our FKC-Lake Shore division provides design/build/install services for innovative Hoisting and Vertical Conveyance Systems. Our goal is to be the industry's best source, and best value, for complete turn-key construction, engineering and design-build services and related products. Across North America, notable projects include The Purple Line Extensions section 3 in Los Angeles, Water Tunnel number 3 in New York City, Eagle Mountain Gas Pipeline and Kemano T2 tunneling projects in British Columbia, Canada, the Inter-Quarry Tunnel in Leesburg, VA and the Century Mine in Volga, WV. Extraordinary Projects need Exceptional Talent DESCRIPTION: As an Mechanical Engineering Manager at Frontier-Kemper, you will have the opportunity to: * Lead and mentor a high-performing team of mechanical engineers and designers. * Oversee all mechanical engineering and design activities across three operational divisions: Heavy Civil Tunneling, Mine Development, and OEM Equipment Manufacturing (FKC-Lake Shore). * Drive innovation in mechanical systems design, including hoisting systems, material handling, shaft sinking equipment, and custom tunneling components. * Manage project engineering schedules, budgets, and deliverables, ensuring mechanical systems meet cost, performance, and reliability targets. * Serve as the primary technical liaison between internal stakeholders, clients, vendors, and regulatory authorities for all mechanical engineering matters. * Direct and coordinate design integration across mechanical, structural, and electrical disciplines to ensure efficient system performance and constructability. * Implement and improve engineering standards, manufacturing practices, and quality processes to enhance safety, productivity, and equipment lifecycle. * Mentor mechanical engineers and designers, fostering technical growth, innovation, and continuous improvement within the organization. REQUIREMENTS: * Bachelor's degree or higher from an ABET-accredited institution. * Minimum 15 years of progressive mechanical engineering experience. * Minimum 10 years in engineering leadership and/or operations management, with demonstrated success leading cross-functional mechanical teams. * Professional Engineer (P.E.) license preferred. * Proven expertise in mechanical systems design, equipment manufacturing, and integration for large-scale construction or industrial applications. * Strong understanding of fabrication methods, hydraulic and electrical interface systems, and mechanical analysis (FEA, stress, fatigue, etc.). * Excellent leadership, communication, and collaboration skills. * Advanced analytical and computer skills, including proficiency with CAD and mechanical design tools. Frontier-Kemper builds extraordinary projects, and we need exceptional talent. Join us and together we will build the future Equal Opportunity Employer

is contingent upon contract award* * This position is eligible for a $500 ZelTech Non-Employee Referral fee. Contact ZelTech Recruiters for questions concerning this matter. * Join Our Talent Community to Stay Connected! Job Summary: ZelTech is seeking a motivated and skilled Mechanical Engineer to support the research, design, analysis, and prototyping of next-generation Unmanned Systems for a Government customer. The ideal candidate will contribute to mechanical design and systems integration across the full development lifecycle and play an active role in advancing mission-ready unmanned technologies. Responsibilities: Assist in the design, development, and evaluation of mechanical components and subsystems for unmanned and autonomous platforms. Conduct mechanical and structural analyses, including load, vibration, thermal, and corrosion assessments. Apply Model-Based Systems Engineering (MBSE) principles to develop, analyze, and manage system models, ensuring the integration of modeling and simulation tools and methodologies with systems engineering processes to support requirements development, architecture design, trade studies, and system validation activities. Generate and revise engineering documentation such as CAD models, drawings, parts lists, system diagrams, and manufacturing plans. Support integration and test activities in lab and field environments, including troubleshooting and resolving mechanical issues during assembly and operation. Contribute to the mechanical aspects of UxS prototype development and validation through hands-on fabrication, testing, and performance assessments. Collaborate closely with multidisciplinary teams including electrical, software, and systems engineers to ensure complete and functional system designs. Maintain accurate technical data and deliverable documentation. Evaluate new mechanical hardware and integration approaches to improve autonomy, survivability, and environmental performance. Support trade-off studies, risk assessments, value engineering, and lifecycle cost estimation from a mechanical standpoint. Support development and validation of mechanical models for simulation of UxS performance in variable environments. Integrate simulation feedback into iterative mechanical design improvements. Requirements: Must be a US citizen. Must possess a bachelor's degree in Mechanical Engineering. Must have an active SECRET clearance. Minimum of 3 years of experience in mechanical engineering, preferably for defense, aerospace, or related technical fields. Demonstrated experience applying Model-Based Systems Engineering (MBSE) practices using tools such as Cameo, SysML, or similar, including integration of modeling and simulation to support systems engineering processes. Proficiency in CAD tools such as SolidWorks or AutoCAD. Working knowledge of mechanical engineering principles related to structural design, materials, thermal management, and environmental survivability. Strong problem-solving skills and hands-on experience with prototype fabrication, mechanical assembly, or field testing. Ability to work independently and as part of a cross-functional technical team. Successful background and drug screening check. Preferred Requirements: N/A Physical Demands or Work Environment: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of the time is spent in an office setting. Occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance, vision, color vision and ability to adjust focus. Frequently required to sit, use hands to finger, handle, or feel, and talk or hear. About ZelTech: Founded in 1988 by Ret. Col. Jack L. Ezzell Jr., Zel Technologies is a trusted leader in national security, providing comprehensive research, development, engineering, and operational support to the Department of Defense, the Intelligence Community, and federal agencies. Originally focused on leveraging operational and software expertise to improve time-critical targeting capabilities for the military, the company advanced its capabilities to provide scientific and HUMINT expertise for CBRNE collection and analysis. In the wake of 9/11, Zel Technologies rapidly expanded its capabilities to provide turnkey ISR support services to US Special Operations Forces (SOF), as well as advanced technical & operational intelligence, physical & data science, and engineering support services to the greater Intelligence and SOF Communities supporting global counterterrorism and CWMD operations. Today, Zel Technologies remains at the forefront of intelligence missions, advancing CWMD and global counterterrorism efforts, while also addressing emerging threats posed by near-peer adversaries. Our team remains committed to delivering adaptive, innovative, and cost-effective solutions across multiple domains, in alignment with the mission priorities of the U.S. Government and its partner nations. Our Mission: Through our commitment to innovation and quality, our skilled teams deliver robust, technology driven solutions and insights that empower our customers to overcome complex challenges and achieve their mission objectives. Our Workforce: ZelTech team members represent a wide range of backgrounds, skills, experience, and personalities bound together by common objectives and mutual respect. You will join a caring community of professional, including many military veterans who challenge and support each other in seeking the right solutions to important matters. Benefits: Medical, Dental and Vision Insurance 401k immediate vesting with company match Flexible Spending Accounts Health Savings Account with company contributions Employee Assistance Program (EAP) Bonuses for performance Voluntary life/accidental death & dismemberment Educational assistance and special training programs Voluntary benefits (accidental, critical illness, whole life) Group life insurance (Company paid) Short-term and Long-term Disability Insurance (Company paid) Paid Time Off (PTO), Holiday Leave, Jury Duty, and Military Leave Health and fitness reimbursement Referral bonuses Employee discounts on various services and products Equal Opportunities: ZelTech is an equal opportunity employer and does not discriminate based on race, color, religion, creed, sex, age, sexual orientation, national origin, disability, marital status, military status, genetic predisposition, or any other basis protected by law.

This role is hands-on and execution-oriented, involving robotic cell setup and tuning, WAAM process development, path planning, integration with power sources, and supporting early production and demos. This position is essential in operationalizing WAAM cells, focusing on building, testing, iterating, and producing rather than purely research and development. Responsibilities * Setup and tune robotic cells for optimal performance. * Develop WAAM processes and plan paths for robotic systems. * Integrate robotic systems with power sources effectively. * Support early production phases and demonstrations. * Contribute technically to make WAAM cells operational. * Participate in building, testing, and iterating processes. Essential Skills * Experience in robotic programming and industrial robotics. * Proficiency in robotic automation, especially with KUKA or similar systems. * Experience with WAAM (Wire Arc Additive Manufacturing) processes. * Understanding of additive manufacturing techniques. Additional Skills & Qualifications * Experience with any WAAM process variant is acceptable. * Experience with tools like Grasshopper is a plus. * A proactive, 'roll up your sleeves' attitude. Work Environment The position is on-site, Monday through Friday, from 8 AM to 5 PM, located around shipyards. The work environment is dynamic and involves a lot of trial and error, making it a unique opportunity to develop a company from the ground up with a clear growth path from individual contributor to lead or director roles. Job Type & Location This is a Contract to Hire position based out of Portsmouth, VA. Pay and Benefits The pay range for this position is $77.00 - $96.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portsmouth,VA. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Junior Mechanical Engineering position with emphasis on electronics hardware design. This position will work with a lead mechanical engineer as part of a cross-functional team of engineers to design and develop high-performance products. The scope of the position encompasses a range of responsibilities, spanning mechanical design, analysis, and integration of high-performance radio amplifiers, servers, power supplies, loudspeakers, and other electronics. Duties may also include the design, assembly and maintenance of production test fixtures as required. Mechanical engineers will also be responsible for fostering partnerships with suppliers to support engineering development activity. Ideal candidates will show a willingness to learn and a grow their skillset while developing innovative solutions to challenging design constraints. They will show a willingness to take on new or unfamiliar challenges while identifying and overcoming downstream obstacles. They will offer customers unique solutions, enabling the team to maintain a competitive edge in the market space. Ideal candidates will have prior experience in the description above. Essential Functions*: Create 3D models for design feasibility and interference detection Produce 2D manufacturing & assembly drawings from 3D models Interface with outside vendors to source custom machined, sheet metal, die-cut, and injection molded parts Develop and manage mechanical design packages (models, drawings, BOMs) Analyze designs to determine suitability for intended purpose and environments, including (but not limited to) thermal and structural with an emphasis on vibration and shock, fatigue, etc. Perform GD&T tolerance analyses of designs to ensure manufacturability and interchangeability. Directly interface with members of the product development team to produce high quality, dependable products and resolve technical issues. Interpret and apply military, industry and customer standards. Attendance and participation in internal and customer-attended meetings. Conduct root cause analysis investigations for production and field failures Provide input into new products, processes, standards, and plans Provide guidance to production/manufacturing operators in the assembly of production hardware. Must be able to work onsite in Virginia Beach, VA (not remote) Education / Training / Skills / Experience: Qualifications: Education: BS in Mechanical Engineering with 3-5 years prior experience OR Associates/Engineering Technology degree and 5-7 years prior experience Fluency with 3D CAD and ability to create complex solid models and assemblies (Creo, Solidworks, Inventor, etc.) Working knowledge and experience generating 2D dimensional CAD drawings (Creo, Solidworks, Inventor, etc.) Experience designing machined, sheet metal, or injection-molded parts Strong analytical and communication skills Ability to take direction and hunger to learn and grow as an engineer. Experience with Microsoft Office suite (Excel, Powerpoint, Word, etc) Willing to travel occasionally, both domestically and internationally. Preferred Qualifications: Ability to think in 3D Experience using PTC applications, including Creo & Windchill PLM software Experience managing large CAD assemblies (100+ parts) Experience with electronics packaging and integration (PCB's, connectors, harnesses, buttons, switches, etc.) Experience with sheet metal & machined-part design Experience with industry standard coatings & finishes (anodize, powder coat, paint, etc.) Understanding and experience designing for both military and commercial environments Knowledge of designing to meet MIL-STD-810 requirements Self-motivated and ability to work with limited guidance Strong team player who can incorporate input from others and can generate consensus Ability to thrive in a fast-paced and dynamic work environment with an emphasis on accuracy and timeliness. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; must be able to remain in a stationary position 50% of the time; use hands to handle or feel objects, tools, or controls; reach with hands and arms; balance; stoop, kneel, talk and hear. The employee must occasionally lift and/or move up to 45 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must have the ability to travel occasionally both domestically and internationally. *Employees must be able to perform the essential functions of the job with or without reasonable accommodation. This job description is intended to convey information essential to understanding the scope of the position described above and it is not intended to be an exhaustive list of skills, efforts, duties, responsibilities or working conditions associated with the position. Ultralife Corporation is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, color, religion, sexual orientation, gender identity, national origin, citizenship, sex, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at *************

Job DescriptionSalary: As a global engineering solutions firm that plays a leading role in the areas of plants, architecture and asset management, Hyundai Engineering is expanding into renewable energy to build a sustainable future. In the area of plants, the company provides total solutions for front-end engineering design (FEED) as well as engineering, procurement and construction (EPC). Job Summary We are seeking a detail-oriented and skilled Architectural Design Engineer to join our project. The candidate will be responsible for reviewing the building structure drawings and supporting the design changes and related techniques. This position requires a strong technical understanding of structural designs, effective document control, and communication skills between internal teams, subcontractors, and clients. Key Responsibilities Manage and maintain construction projects in a safe, timely, and sustainable manner Support the overall documentation management for mechanical works, including contracts, submittals, RFAs, NCRs, and ITPs Manage materials and equipment tracking, including order status, delivery schedules, and inventory control Maintain up-to-date drawing files (Design drawings, Shop drawings, As-built, etc.) and ensure proper distribution to relevant teams Assist with preparing and reviewing Bill of Quantities (BOQ) and Material Inspection Requests (MIR). Coordinate with the site team to ensure that required materials and documentation are available on time Communicate with clients and subcontractors to clarify documentation and material-related issues Provide administrative and technical support to the Mechanical Manager, including data updates and reporting Qualifications Bachelors degree or higher in Structural Engineering or a related field Minimum of 3 years of hands-on experience in structural design and construction (experience level may be adjusted based on project scale) Proficiency in Microsoft Office experience (Word, Outlook, Excel, PowerPoint) Technical Skills Proficient in Tekla Structures Proficient in AutoCAD Experience with BIM tools, including Revit Preferred Experience with large-scale construction projects such as industrial facilities, plants, or high-rise buildings Understanding of international codes and standards (AISC, ACI, ASCE, etc.) and local regulations Strong teamwork, communication, and coordination skills U.S. Professional Engineer (PE) license preferred Bilingual in English and Korean is highly preferred for better coordination with the team Additional Information Must be legally authorized to work in the U.S. Weekend work may be required depending on the project schedule Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the essential functions typically require sitting, standing, climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, handling tools or controls, talking, hearing, seeing, repetitive motions, and include the physical ability to navigate active job sites and construction areas Employee may occasionally lift and/or move up to 50 pounds. Work Environment Work is performed in a variety of environments ranging from the office to construction sites, which may involve working near moving mechanical parts, equipment, or machinery on rough or uneven surfaces, and exposure to dust, noise, chemicals, odors, gas, oils, fumes, extreme temperatures, or heights. May occasionally be exposed to inclement or hazardous conditions, including but not limited to inadequate lighting, work space restrictions, and intense noises and travel; requiring moderate physical activities. The above statements are intended to describe the general nature and level of work being performed by incumbents. They are not intended to be an exhaustive list of all responsibilities, duties, skills required of personnel so classified and it is not a contract express or implied. All employees may have other duties assigned at any time.

Are you looking to make a tangible impact on project outcomes? As an experienced Project Engineer, you will track and analyze cost data, ensuring our projects stay on budget. Your expertise in resource monitoring and control, combined with your construction knowledge, will keep our projects running smoothly and efficiently. Apply now and transform your career with us. What you will be doing Meet with engineering team to review production schedule and confirm all materials, equipment and resources. Review shop drawings, design specifications, material requirements and project data. Provide technical input for project work plan and scheduling. Identify risk elements of production, materials, equipment or process that could negatively impact the budget or schedule. Evaluate weekly and monthly production, schedule and budget projections to accurately track project performance. Updatesproject schedule weekly for owner and management reporting. Prepare and managesa three-week work plan. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost. Initiate and manages all Requests for Information (RFIs). Remit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported. Manage invoicing with accounting team regarding materials, equipment and subcontractor needs. Review certificates and permits needed to perform work. Review required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel. Participates in all weekly safety meetings with field team and project leadership; presents field analysis as needed. Perform project leadership role during close-out procedures if Project Manager separates from project before close. Reviews close-out checklist with owner and field crews at the end of the project. What we are looking for Bachelor's Degree in a related field. 7+ years construction engineering experience. Experience managing construction engineering teams. Proven skill and ability managing engineering teams in a design build or other alternative build project. Able to set clear expectations for direct reports regarding role and responsibilities. Able to delegate and assign work to engineering team to progress the project production forward. Advanced knowledge of contract specifications and quality assurance practices. Able to identify budget and project costs and recommend options to mitigate project delays. Knowledge of design build and other alternative build techniques. Knowledge of financial reporting methods, quantity tracking methods and cost coding. Knowledge of construction scheduling and production time management preferred. Why work for us Some of the benefits you may be eligible for as an employee are: Comprehensive compensation package and paid time off program Industry leading 401(k)/RRSP Medical/Extended Health Care, Dental, Vision and/or Provincial Medical Wellness benefits & Employee Assistance Program Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $110,000.00/Yr. Salary Max USD $130,000.00/Yr.

Branch is searching for a highly skilled, team-oriented Project Engineer to join our well-established, growing company. The Project Engineer oversees all engineering and technical aspects of the project, with a strong emphasis on organizing and planning, to assure the highest level of accuracy and quality. This position reports directly to the Project Manager and provides support in project safety, documentation, plans and specifications, construction means and methods, scheduling, budgeting, projections, and project closeout. Duties/Responsibilities * Measure, report and forecast accurate cost and revenue dollars and quantities * Fully review contract documents, drawings and specifications * Assist Pre-Construction Services/Project Manager(PM) in defining project budget and cost codes * Prepare Initial Budget Adjustments for PM review prior to start of work * Ensure the acquisition of permits, through appropriate channels, as required * Maintain and update RFI Log, Change Order Log, and Submittal Log * Maintain and update the Materials Book - C25s/Certs/Etc. * Support quality control/Ensures approved materials are being used * Draft and submit Change Orders per PM approval * Draft and submit RFIs per PM approval * First level approval of subcontractor invoices for PM final approval Duties/Responsibilities Cont. * Review and submit end of month billings * Develop and communicate an effective plan in cooperation with the superintendent * Monitor work to ensure means and methods are followed and effective * Maintain and update project schedule for PM review * Review and/or develop material tracking list * Promote Branch Safety Culture * Perform pre-punch list walk thru with PM and Superintendent * Enforce contract close-out timeline and reconciles with Subcontractors * Review cost data for accuracy and assists PM in generation of projection updates Qualifications Required Qualifications: * Bachelor's degree in civil engineering, construction management, or related field Preferred Qualifications: * Master's Degree in engineering/Construction and two years of experience in heavy civil VDOT/large site construction Competencies Budgets/Cost Control Organizational Savvy Work Environment/Safety Establishing Relationships Working with Financial Information Travel Extensive travel within the Virginia Beach Region Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Nearest Major Market: Hampton Roads Apply now " Find similar jobs: Branch Civil Project Management * Careers Home * View All Jobs * Benefits * Life at Branch * Programs * branchgroup.com * * * Copyright 2025

Synigent Technologies is searching for a Manufacturing Engineer, with strong CNC experience for a client in Chesapeake VA. . Minimum requirements include: AA degree in Mechanical Engineering 10 years experience as CNC programmer (turning, milling, drilling, etc) Lean manufacturing experience Ability to prepare and maintain process sheets, process maps, in a Poka-Yoke environment Basic understanding of Statistical Process Control Ability to read, understand, and create complex engineering drawings and blueprints Sound like you or someone you know? Let's connect today.

Engineering Designer Purpose: Valkyrie Enterprises is seeking a Engineering Designer in Virginia Beach, VA. This position is to provide drafting and design drawing support for modernization and upgrade initiatives for Navy Ship Self Defense Systems (SSDS). Job Description: The team member shall be familiar with ASME drawing standards. The team member shall utilize government provided redline drawings to update technical data packages (TDPs) and drawings for final release. The team member shall be able to provide quality control checks on various TDPs. The team member shall update and maintain drawing tracking databases. The team member shall update current 3D models in Inventor to capture changes. The team member will have to support onsite drawing activities at Dam Neck Annex Base. Qualifications: Must have 3 plus years of experience with naval systems and/or SSDS and a high school diploma. Must have experience working with Microsoft Office Suite (I.e., Project and Excel). Must have experience working with AutoCAD and Inventor software. Desired Qualifications: Certification from an accredited Technical School in the Drafting/Design field, preferred. Experience with Engineering Change Proposals (ECPs), preferred. Experience with working on Dam Neck Annex Base, preferred. Security Requirements: Must have an Active DoD Secret clearance and the ability to maintain a clearance. Must maintain clearance eligibility to access military facilities, naval shipyards, and private shipyards. Travel Requirements: Less than 10% If position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. (More information regarding REAL ID can be found: *************************** ) Physical Requirements: Must be able to work in an office, industrial, or shipboard environment. Be able to lift and move materials not to exceed the guidelines set for one-man lift. Must be able to perform site surveys and carry a laptop computer. Valkyrie strictly adheres to a policy of equal employment opportunity. This policy is based on Valkyrie's commitment to hire and retain qualified employees consistent with position requirements; and to seek, employ, promote and treat all employees and applicants for employment without regard to race, color, religious creed, national origin, ancestry, citizenship status, pregnancy, childbirth, physical disability, mental disability, age, military status or protected veteran status, marital status, registered domestic partner or civil union status, gender (including sex stereotyping and gender identity or expression), medical condition, genetic information or sexual orientation or other protected characteristics. Additionally, Valkyrie Enterprises provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid life and disability insurances, 401k with match, education reimbursement, as well as company paid holidays and paid time off (PTO).

Job Description Stampede Ventures, a company within the BSNC family is currently seeking a qualified, highly motivated individual with USACE Construction experience. The candidate will be performing all facets of the Bering Straits East Coast model to include quality control management, submittal tracking, daily reporting, communicating deficiencies to the customer, running multiple sites simultaneously, and other various tasks as assigned. This position is in support of a current contract that supports a project at Fort Myer, Arlington, VA location. Depending on workload, this position may be extended to additional contracts as needed. Applicants will be contacted via phone or email within ten (10) business days of submittal. ESSENTIAL DUTIES & RESPONSIBILITIES Plans and supports (or organizes) projects and sub-projects with limited complexity under the direct supervision of the Project Manager or Director. Drives and monitors daily progress of project work packages and activities to meet the project schedule with project team members in support of the Project Manager. Provides detailed updates to Project Managers, project team members, and project stakeholders. Organizes and maintains project documentation and artifacts, trackers, and reports. Manages and oversees Definable Features of Work Submittal packages and supports Superintendent/PM Supports maintenance and continuous improvement efforts to project management processes and procedures. Engages in and actively volunteers for Continuous Improvement projects/tasks. Must follow all required ISO procedures, comply with all work exposure EH&S training requirements. Must be able to travel infrequently. Miscellaneous duties assigned. Supports overall project quality and reviews all trade contractors' means and methods in accordance with project contract documents with the Project Superintendent. Reviews and analyzes submittal data on the product specifications, scopes of work, plans and engineer reports to determine the finished product meets the quality and reliability expectancy of the Client. Assists the project management team with the RFI process to ensure that all RFIs are properly and timely logged and that the information requests are reviewed and then forwarded to the appropriate people. Supports testing programs will be conducted throughout construction to verify that all materials and installations are as specified; in addition to mandatory "milestone" inspections or tests, supports the QC who monitors all aspects of the construction on a daily basis to verify contract compliance. Assists with plans, coordination, and the quality control program as designed, to ensure continuous production of projects are consistent with established standards by performing the QCM duties personally or through subordinate supervisors. Performs random project site audits for all stages in the production process and inspects materials for specifications and contract compliance. Interacts effectively with the NAVFAC Quality Control personnel to ensure. Previous Federal construction experience is preferred. NON-ESSENTIAL DUTIES Have existing relationships with Federal government customers in the Southeast Region Previous experience working with 8(a) companies. Other duties as assigned. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION Required (Minimum) Qualifications One year experience supporting a Federal or commercial projects. Must be US Citizen USACE Quality Control Certification OSHA 30 Certification (can be obtained after employment) Current or ability to get a security clearance is preferred. Current certifications for First Aid and CPR Knowledge, Skills and Abilities Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 Valid Driver's License Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce. Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Knowledge of Local vendor and subcontractor companies. Must be organized and have excellent communication skills. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees must always maintain a constant state of mental alertness. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee often works in an office environment. The employee is required to visit job sites regularly and will be subject to a lift and/or move up to 25 pounds. The employee is occasionally required to stand, climb or balance and stoop, kneel, crouch or crawl. During visits to job sites, the employee may be exposed to extreme cold or hot weather conditions. SUPERVISORY RESPONSIBILITIES Limited supervisory responsibilities will be required for this position. ADDITIONAL QUALIFYING FACTORS As a condition of employment, may be required to pass a pre-employment drug screening, as well as have acceptable reference and background check results to obtain access to military base. Must have reliable transportation to/from work as a necessity and must be able to obtain access to military installations. Shareholder Preference. BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Are you ready to take the first step in your civil engineering career with a company that values innovation, collaboration, and professional growth? Timmons Group is looking for a motivated and detail-oriented Civil Project Engineer I candidates for in our Virginia Beach, VA office. A Civil Project Engineer I is responsible for designing, building, supervising, operating, and maintaining large construction projects and systems, including roadways, piping systems, utilities, land grading specifications, and other infrastructural systems for commercial and residential building sites. Timmons Group is currently seeking candidates for the following groups: * Land Development * Stormwater Management * Water/Wastewater Essential duties and responsibilities of a successful candidate include but are not limited to: * Design project components using AutoCAD Civil 3D and other industry-standard software. * Complete calculations using engineering formulas and skills and/or utilizes computers in order to solve problems * Research and prepare material specifications, installation guidelines, and inspection protocols. * Work to complete design details and plan sets * Complete field observation, inspection and data collection duties as directed by senior engineering staff * Collaborate with client staff and internal design team as directed by senior engineering staff * Contribute to cost estimates and technical reports that drive project success. Skills/Requirements of a successful candidate include but are not limited to: * A bachelor's or master's degree in civil engineering or a closely related degree with coursework in land development, and/or water resources preferred * EIT preferred * Working knowledge of AutoCAD Civil 3D

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description SUMMARY OF POSITION: The Project Engineer is responsible for providing sound project management related to capital and continuous improvement projects. This role is responsible for implementing assigned projects to meet the approved and established scope, budget and schedule. The Project Engineer is expected to achieve defined forecast spend accuracy on capital projects through sound project management and leadership. This position will be required to demonstrate solid organizational skills including attention to detail and multi-tasking skills. The Project Engineer will work as an integral member of a project team. ESSENTIAL FUNCTIONS: 1. Maintain compliance with safety and quality systems while possessing an uncompromising commitment to occupational safety. 2. Deliver on assigned capital, major maintenance, and plant alteration projects. 3. Deliver on project scopes, budgets, schedules and prepare CER documentation. 4. Plans and participates in Field Acceptance Testing and Site Acceptance Testing 5. Coordinate and participates in validation protocols (IQ/OQ/PQ) 6. Support assigned continuous process improvements to reduce costs. 7. Organize resources and oversee completion of project work. 8. Coordinate internal resources and third parties/vendors for the flawless execution of projects. 9. Establish and maintain relationships with third parties/vendors and successfully manage the relationship with all stakeholders. 10. Assist in the definition of project scope and objectives, involving all relevant stakeholders and ensuring technical feasibility. 11. Develop detailed and comprehensive project plans to monitor and track performance and progress. 12. Manage changes to the project scope, project schedule, and project costs using appropriate verification techniques. Qualifications Experience: Five years of project management and manufacturing engineering experience preferably in pharmaceutical, medical device, or related industry to include packaging, project management and/or maintenance engineering. Ability to follow the implementation of new equipment and testing of approved validation protocols (IQ/OQ/PQ) and commissioning documents. Knowledge of equipment design and project management. PMP certification is a plus. Additional Information To know more on this position or to schedule an interview, please contact: ******************************* ************

Responsible for the preventative maintenance, repairing, and continual operation of all Central Laundry Facility equipment. The Laundry Plant Engineer II assists with the daily laundry production and adjusts the equipment as necessary to ensure the quality of the finished linen and terry items. Responsible for closely monitoring the equipment throughout the production process to ensure operational down-time is minimized. Reports directly to the Laundry Chief Engineer. Engineer II assists the Laundry Director of Operations, Laundry Chief Plant Engineer, Production Manager, Production Supervisor, and Laundry Attendants to maximize plant productivity and efficiencies. This role will require the Engineer II to perform maintenance services after production hours while the laundry machines are not in operation. Responsibilities 1. Provide daily routine preventative maintenance and repairs to all Central Laundry equipment to include greasing/ lubricating, checking belt and/ or chain tension, making sure the equipment is clean and lint-free and performing a general inspection to ensure proper functionality. 2. Maintain and track inventory spare parts, supplies, tools, and equipment. 3. Works with all of the production and mechanical equipment throughout the plant. 4. Attends all departmental, company- wide, and factory in-service training and education programs. 5. Provides prompt feedback to the Chief Laundry Plant Engineer and Engineer I on production, 6. maintenance, safety, security, and physical environment issues. 7. Always works as a team player to provide quality linen services, whether directly or indirectly. With a scope of responsibility, each employee will assist other team members in accomplishing their job duties in order to "get the job done". 8. Holds self and team members accountable for knowledge of and full compliance with customer service performance standards as listed on all team member's job descriptions. Customer is defined as hotel guest, restaurant patron, fellow employee, and supplier/vendor. 9. Participates in planning and in the efficient, effective management/ utilization of company resources and assets. 10. Supports and is actively involved in quality improvement initiatives. 11. Responsible for preventative maintenance, repairing, and operating all of the Central Laundry plant equipment. 12. Performs scheduled preventive maintenance on all major equipment to include but not limited to: a. Laundry equipment b. Kitchen equipment c. Air handlers d. Pumps e. Motors 13. Repairs all equipment as needed 14. Repairs all in-unit items as needed on appliances, cabinetry, doors, etc. 15. Performs all necessary laundry facility and public area repairs and maintenance. 16. Provide General "handyman" skills Qualifications Type Qualification Experience Minimum of one year of maintenance experience, with special emphasis on preventative maintenance preferred. Experience High schools diploma required, any other combination of education, training or experience that provides the required knowledge skills and abilities. Experience Significant experience with all maintenance disciplines. Skill Possess a working knowledge of electronics, pneumatics, hydraulics, plumbing, mechanics to include water and steam. Skill Proficient in reading OEM schematics, reading equipment manuals, and ordering repair parts. Skill Must have a working knowledge of computers and MS Office programs to include Word, Outlook and Excel. Skill Able to listen to and process oral and written instructions, have customer awareness and sensitivity skills, and ability to organize and schedule plant personnel, assign work and ensure task completion on a daily basis. Skill Able to multi-task, research part suppliers, be highly organized, etc.

Skanska is searching for a dynamic Temporary Works Design Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to society and the environment around us. We build in many different verticals. (******************************************************** Whether we are building schools to provide inspiring spaces for learning, roads to connect communities, or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values -Be Better Together, Act Ethically and Transparently, Commit to Customer, and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. The Temporary Works Design Engineer is involved with the design of municipal infrastructure, highways, railways, transit systems, airports, harbors, bridges, tunnels, building, water supply and sewage treatment facilities. The position reports to the Senior Engineer. The Design Engineer must be a team player and have experience in heavy civil construction. This includes budgeting, organization, implementation, and scheduling of the project. Ensure the project is constructed in a safe, ethical manner and in compliance with all federal, state, and local laws. The Project Management Team can vary greatly depending on the size and complexity of the projects, which in turn will affect the number of responsibilities the Project Engineer will be involved in. **Design Engineer Required Qualifications:** + 2+ years of heavy civil infrastructure industry experience is required + Proficiency in Structural software such as STAAD Pro, RISA or SAP 2000 or Geotechnical software such as CivilTech or PLAXIS and AutoCAD software + 2+ years experience with falsework, formwork, pile templates, temporary works design. + Bachelor of Science in Construction or Engineering or equivalent experience and minimum 5 years prior relevant experience. **Our** Investment (************************************************ **in you:** + We believe that Benefits (********************************************************************** should connect you to the support you need when it matters most, and should help you care for those who matter most. That's why we provide an array of options (including medical, dental, and vision insurance plans), expert guidance, and always-on tools, that are personalized to meet the needs of your reality - to help support you physically, financially, and emotionally through the big milestones and in your everyday life. Please visit the compensation and Benefits (********************************************************************** summary on our careers site for more details. + As a Skanska community, our values ground us, and our diversity of experience propels us forward. No matter what your career stage, there's a place for you to thrive here and partner with us in shaping how our world lives, moves, and connects. + At Skanska, we Care for Life. And we're committed to supporting your whole health and peace of mind through inclusive and personalized total rewards. + We're committed to your success by developing you in your role and supporting your career growth + Compensation and financial well-being (********************************************************************** - Competitive base salary, excellent bonus program, 401k, & Employee ownership program. **Come work with us and join a winning team!** **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

Connect Talent Solutions, one of Hampton Roads fastest growing companies is seeking a dynamic and motivated Project Engineer with 0-3 years of experience to join our team and support our Project Manager in the successful execution of construction projects. The ideal candidate should possess a degree in Civil Engineering, Construction Management, or a related field and have a solid understanding of HVAC and plumbing systems. The Project Engineer will play a crucial role in responding to Requests for Information (RFIs), reviewing drawings, and maintaining project schedules to ensure the timely and efficient completion of our projects. Key Responsibilities: - Collaborate closely with the Project Manager to understand project goals, scope, and requirements. - Assist in reviewing and interpreting architectural and engineering drawings, specifications, and other project documentation. - Proactively respond to Requests for Information (RFIs) from various stakeholders, providing accurate and timely information to ensure clarity in project execution. - Maintain organized records of all RFIs, responses, and other relevant project correspondence. - Contribute to the development and maintenance of project schedules, tracking milestones, deadlines, and critical path activities. - Participate in project meetings and communicate effectively with cross-functional teams, clients, subcontractors, and vendors. - Support the identification and resolution of potential issues or conflicts that may impact project progress. - Gain a deep understanding of HVAC and plumbing systems within the context of construction projects. - Collaborate with the design and engineering teams to ensure coordination and integration of HVAC and plumbing systems into the overall project. - Assist in the coordination of construction activities, ensuring that work is executed in accordance with project plans and specifications. - Participate in site visits to monitor construction progress and verify compliance with project requirements. - Contribute to the preparation of progress reports, project documentation, and presentations for stakeholders. Qualifications: - Bachelor's degree in Civil Engineering, Construction Management, or a related field. - 0-3 years of relevant professional experience in construction projects. - Solid knowledge of HVAC and plumbing systems and their integration within construction projects. - Familiarity with reading and interpreting construction drawings, specifications, and technical documents. - Strong organizational skills and attention to detail to effectively manage project documentation. - Excellent communication and interpersonal skills to collaborate with various stakeholders. - Proficiency in project scheduling and management tools is a plus. - Ability to adapt to changing priorities and handle multiple tasks in a fast-paced environment. - Enthusiasm for learning and growing within the construction industry. - Strong problem-solving skills and a proactive approach to challenges. - Professionalism and the ability to represent the company positively in client interactions. Benefits: - Competitive compensation package. - Opportunities for professional development and career growth. - Exposure to diverse and challenging construction projects. - Collaborative and supportive work environment. - Comprehensive benefits package including health insurance, retirement plans, etc. If you are a motivated and detail-oriented individual looking to kick-start your career in project engineering within the construction industry, we encourage you to apply. Join our team and contribute to the successful delivery of projects that make a tangible impact in our community.

Job Title: Release Train Engineer (RTE) Department: Operations - Services Reports To: RavenTek Program Manager Schedule: Monday - Friday Hours: Full-time, 40-hours/week FLSA Status: Hourly, Nonexempt Clearance: Secret Position Summary The Release Train Engineer (RTE) is responsible for leading agile transformation efforts and coordinating scaled agile development across multiple teams supporting enterprise modernization initiatives. This role ensures delivery alignment with NAVSEA 03D3's digital modernization objectives, optimizing delivery flow, and enabling high-performance team execution. The performance of this position is key to RavenTek's performance on the contract, and therefore RavenTek's mission to support the customer. Requirements Essential Duties and Responsibilities Facilitate Planning Interval (PI) planning, system demos, and SAFe ceremonies across agile teams. Coordinate dependencies, risks, and impediments across the Agile Release Train (ART). Guide cross-functional teams to deliver high-availability solutions (targeting 99.9% uptime). Collaborate with stakeholders to align development efforts with modernization goals. Monitor and report on program metrics aligned to NAVSEA 03D3 strategic objectives. Coach teams on agile best practices, roles, and responsibilities. Support continuous improvement initiatives at the team and train level. Manage relationships and communication across internal and external stakeholders. Integrate cybersecurity and ISO-certified processes into the agile lifecycle. Contribute to digital transformation and agile process adoption in complex environments. Enter actual time worked, once complete, at the end of the day, or no later than 10:00 a.m. the following workday, and submit timesheets at the end of each pay period. Provide Monthly Status Reports (MSR) to the RavenTek Program Manager by the deadline provided. Monitor RavenTek email on a regular basis, at least 3 times per week, and respond accordingly. Complete required compliance training as assigned. Travel on an as needed basis up to 10%. Other duties as assigned. Knowledge and Critical Skills Comprehensive knowledge of scaled agile frameworks (e.g., SAFe) and agile delivery practices. Experience with Agile Release Train coordination, planning, and delivery. Strong facilitation skills for PI planning, retrospectives, and team syncs. Familiar with DevSecOps practices and secure development pipelines. Excellent communication, coaching, and problem-solving skills. Understanding of government or DoD agile environments preferred. Must understand agile development and cybersecurity compliance requirements. Must be comfortable coordinating multiple teams and managing remote or hybrid environments. Ability to drive alignment, resolve conflicts, and enable agile execution across teams. Education & Work Experience Bachelor's degree in Computer Science, Engineering, or related field. Minimum 5 years' experience in agile project management, Scrum Master, or RTE roles. Certifications, Licenses CompTIA Security+ CE. SAFe Release Train Engineer (RTE) Certification, desired. Other SAFe or scaled agile certifications, desired. Special Requirements Must be able to obtain and maintain required security clearance. Work Environment Employee will be working indoors in an office environment with other people. Potential moderate temperature fluctuations. Typical indoor and computer related noise level, and typical office, paper, and equipment related dust. Exposure to video display terminals occurs on a regular basis. Physical Demands To successfully perform the essential functions of the job, the employee needs to be able to sit at a workstation for extended periods; use hand(s) to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear; see to read printed materials and computer screens; mobility to work in a typical office setting. Ability to work on desktop or laptop computer for extended periods of time reading, reviewing/analyzing information, and may be required to provide recommendations, summaries and/or reports in written format. Must be able to effectively communicate with others verbally and in writing. Employee must be able to lift and/or move moderate amounts of weight, typically up to 20 pounds. Regular and predictable attendance is essential. ADA: RavenTek will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990. EEO/AA: RavenTek does not discriminate based on race, color, national origin, sex, religion, age, disability, sexual orientation, gender identity, veteran status, height, weight, or marital status in employment or the provision of services and is an equal access/equal opportunity/affirmative action employer. This job description is not intended to be an all-inclusive list of duties and standards of the position and will be reviewed periodically as duties and responsibilities change with business necessity. Essential job functions are subject to modification. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Full-time Description Job Title: Release Train Engineer (RTE) Department: Operations - Services Reports To: RavenTek Program Manager Schedule: Monday - Friday Hours: Full-time, 40-hours/week FLSA Status: Hourly, Nonexempt Clearance: Secret Position Summary The Release Train Engineer (RTE) is responsible for leading agile transformation efforts and coordinating scaled agile development across multiple teams supporting enterprise modernization initiatives. This role ensures delivery alignment with NAVSEA 03D3's digital modernization objectives, optimizing delivery flow, and enabling high-performance team execution. The performance of this position is key to RavenTek's performance on the contract, and therefore RavenTek's mission to support the customer. Requirements Essential Duties and Responsibilities Facilitate Planning Interval (PI) planning, system demos, and SAFe ceremonies across agile teams. Coordinate dependencies, risks, and impediments across the Agile Release Train (ART). Guide cross-functional teams to deliver high-availability solutions (targeting 99.9% uptime). Collaborate with stakeholders to align development efforts with modernization goals. Monitor and report on program metrics aligned to NAVSEA 03D3 strategic objectives. Coach teams on agile best practices, roles, and responsibilities. Support continuous improvement initiatives at the team and train level. Manage relationships and communication across internal and external stakeholders. Integrate cybersecurity and ISO-certified processes into the agile lifecycle. Contribute to digital transformation and agile process adoption in complex environments. Enter actual time worked, once complete, at the end of the day, or no later than 10:00 a.m. the following workday, and submit timesheets at the end of each pay period. Provide Monthly Status Reports (MSR) to the RavenTek Program Manager by the deadline provided. Monitor RavenTek email on a regular basis, at least 3 times per week, and respond accordingly. Complete required compliance training as assigned. Travel on an as needed basis up to 10%. Other duties as assigned. Knowledge and Critical Skills Comprehensive knowledge of scaled agile frameworks (e.g., SAFe) and agile delivery practices. Experience with Agile Release Train coordination, planning, and delivery. Strong facilitation skills for PI planning, retrospectives, and team syncs. Familiar with DevSecOps practices and secure development pipelines. Excellent communication, coaching, and problem-solving skills. Understanding of government or DoD agile environments preferred. Must understand agile development and cybersecurity compliance requirements. Must be comfortable coordinating multiple teams and managing remote or hybrid environments. Ability to drive alignment, resolve conflicts, and enable agile execution across teams. Education & Work Experience Bachelor's degree in Computer Science, Engineering, or related field. Minimum 5 years' experience in agile project management, Scrum Master, or RTE roles. Certifications, Licenses CompTIA Security+ CE. SAFe Release Train Engineer (RTE) Certification, desired. Other SAFe or scaled agile certifications, desired. Special Requirements Must be able to obtain and maintain required security clearance. Work Environment Employee will be working indoors in an office environment with other people. Potential moderate temperature fluctuations. Typical indoor and computer related noise level, and typical office, paper, and equipment related dust. Exposure to video display terminals occurs on a regular basis. Physical Demands To successfully perform the essential functions of the job, the employee needs to be able to sit at a workstation for extended periods; use hand(s) to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear; see to read printed materials and computer screens; mobility to work in a typical office setting. Ability to work on desktop or laptop computer for extended periods of time reading, reviewing/analyzing information, and may be required to provide recommendations, summaries and/or reports in written format. Must be able to effectively communicate with others verbally and in writing. Employee must be able to lift and/or move moderate amounts of weight, typically up to 20 pounds. Regular and predictable attendance is essential. ADA: RavenTek will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990. EEO/AA: RavenTek does not discriminate based on race, color, national origin, sex, religion, age, disability, sexual orientation, gender identity, veteran status, height, weight, or marital status in employment or the provision of services and is an equal access/equal opportunity/affirmative action employer. This job description is not intended to be an all-inclusive list of duties and standards of the position and will be reviewed periodically as duties and responsibilities change with business necessity. Essential job functions are subject to modification. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.