Explore jobs
Find specific jobs
Explore careers
Explore professions
Best companies
Explore companies
Best mechanical engineer certifications
Mechanical engineer certifications allow job seekers to demonstrate their competency as an mechanical engineer to employers. However, not all mechanical engineer certifications provide the same value for job seekers.
The best certifications for a mechanical engineer are Engineer In Training Certification (EIT), EPA Amusement Operators Safety Certification (EPA), and Certified Energy Manager (CEM).
Below is a list of the best mechanical engineer certifications. Obtaining an mechanical engineer certification will give you a leg up when you apply for jobs and increase your potential salary.
18 best certifications for mechanical engineers
18 best mechanical engineer certifications
1. Engineer In Training Certification (EIT)
The EIT Certification, which is formally known as the Engineer In Training Certification, is simply a document, a number, granted by the individual’s state engineering board after they pass the Engineer In Training Exam. The Engineer in Training Exam (EIT Exam) is the first of two exams you will take as you move towards obtaining your Professional Engineering License (PE). This exam, which you may also hear referred to as the Fundamentals of Engineering exam (FE Exam), is developed and administered in all states (and a number of locations outside the US) by the National Council of Examiners for Engineering and Surveying (NCEES). The FE Exam is offered to eligible students year-round in four different testing windows.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? No
- Renewal required? No
2. EPA Amusement Operators Safety Certification (EPA)
A comprehensive, equipment specific safety program designed to provide operators and their employees with a thorough understanding of best risk management practices. Industry accidents, which serve to put a spotlight on potential issues, can often be avoided through the utilization of proper risk management techniques.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
3. Certified Energy Manager (CEM)
CEM, which stands for Certified Energy Manager®, recognizes individuals who have demonstrated high levels of experience, competence, proficiency, and ethical fitness in the energy management profession. Each CEM candidate must meet one of the following criteria. A four-year engineering degree and/or P.E., with at least three years experience in energy engineering or energy management.A four-year business or related degree, with at least five years experience in energy engineering or energy management.A two-year technical degree, with eight years experience in energy engineering or energy management.Ten years or more verified experience in energy engineering or energy management.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
4. Project Management Professional (PMP)
The PMP designation following your name tells current and potential employers that you have demonstrated a solid foundation of knowledge from which you can competently practice project management.To be eligible for a PMP Credential, you must first meet specific educational and project management experience requirements and agree to adhere to a code of professional conduct. The final step to becoming a PMP is passing a rigorous multiple-choice examination designed to objectively assess and measure your ability to apply project management knowledge in the following six domains: initiating the project, planning the project, executing the project, monitoring and controlling the project, closing the project, and professional and social responsibility. This computer-based examination is administered globally with translation aids in 10 languages.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
5. Engineering Management Certification Fundamentals (EMCF)
The EMCF examination emphasizes fundamental aspects and principles of engineering management and is designed for early career engineers and other technical professionals. If you are an early career engineer, scientist, or other technologist intent on entering engineering management on your career path, then the EMCF credential is right for you.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
6. Certified Agile Developer (CAD)
Agile approaches help teams respond to unpredictability through incremental, iterative work cadences, known as sprints. Agile methodologies are an alternative to waterfall, or traditional sequential development. Agile, a popular method of delivering top-quality software on schedule through a collaborative, iterative approach. Certification helps in understanding the key principles of Agile software development, which promote faster release cycles, better deliverable's and the ability to adapt quickly to changing circumstances. You’ll gain knowledge on policies and process improvements that can enhance interactions between developers and project and program managers. Agile software development, uses iterative, feature-driven, customer-focused Agile practices to develop applications that meet user requirements. In this certification, you also gain practical experience performing each role within an Agile team.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? No
- Renewal required? No
7. Certified Systems Engineering Professional (CSEP)
Targeted towards systems engineers with five or more years of systems engineering work experience
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 5 year(s)
8. Six Sigma Yellow Belt
The IASSC Certified Lean Six Sigma Yellow Belt (ICYB) is a professional who is versed in the basics of the Lean Six Sigma Methodology who supports improvement projects as a part of a team or conducts small projects on a part time basis. A Lean Six Sigma Yellow Belt possesses an understanding of the aspects within the phases of D-M-C.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
9. LEED AP Building Design + Construction (LEED)
For professionals with expertise in the design and construction phases of green buildings, serving the commercial, residential, education and healthcare sectors. The LEED BD+C exam is designed to measure your knowledge and skill in understanding the LEED Rating system and ability to facilitate the project certification process.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
10. Certified Manufacturing Engineer (CMfgE)
Professionals who earn a CMfgE demonstrate a comprehensive knowledge of manufacturing processes and practices. Pursuing a CMfgE certification requires a minimum of 8 years of combined manufacturing-related education and/or work experience, including a minimum of 4 years of work experience. A CMfgT with a minimum of 7 years manufacturing-related work experience and/or education also qualifies.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
11. Software Engineering Master Certification (SEMC)
This professional competency certification requires successful completion of Certificates of Proficiency in twelve key knowledge areas: Software Engineering Requirements, Software Engineering Design, Software Engineering Construction, Software Engineering Testing, Software Engineering Maintenance, Software Engineering Configuration Management, Software Engineering Quality, Software Engineering Processes, Software Engineering Models & Methods, Software Engineering Management, Software Engineering Project Management, Software Engineering Economics and the successful completion of two advanced applied modules.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
12. Master Certified Electronics Technician (CETma)
A technician with six or more years combined work and electronics training may be eligible for the ETA Master Certified Electronics Technician (CETma) certification. The Master certification was created to showcase those technicians who are able to demonstrate proficiency in the many fields of electronics. In addition to the Associate level certification, one must successfully obtain six other certifications, with no more than two originating from the same specialized category, in order to qualify.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 1 year(s)
13. Professional Engineering Manager (PEM)
The professional certification at this level is designed for experienced technical managers seeking to validate their skills and experience with a professional certification.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
14. Certified Quality Engineer (CQE)
The Certified Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use metrology and statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
15. Software Engineering Management Associate Engineer
Software engineering management involves a number of various activities and processes. It requires an understanding of software engineering economics, software development process, software models and methods as well as traditional management functions such as planning, coordinating measuring, controlling and reporting in the context of software engineering.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
16. Certified Maintenance Manager (CMM)
Today's successful maintenance managers must have effective human resources and facilities management expertise, sound judgment, and practical skills. They must keep pace with change, improve their knowledge, and share their experience with others. The Certified Maintenance Manager (CMM) designation provides recognition for these skills.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 5 year(s)
17. Certified HVAC Designer (CHD)
Earning the Certified HVAC Designer (CHD) certification will let your employer, peers and customers know that you have the knowledge, skills and abilities needed to get the job done, and position you for continued recognition and success.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
18. Precision Sheet Metal Operator Certification (PSMO)
PSMO Certification is the metal fabricating industry's first comprehensive exam designed to assess a candidate's knowledge of fundamental precision sheet metal fabrication processes in shearing, sawing, press brake, turret punch press, laser cutting, and mechanical finishing. PSMO certification gives employers a tool to make better decisions in hiring new employees, training current workers, and promoting and retaining experienced team members. For operators who validate their accomplishments with certification, it can be a means to advance their career, obtain a promotion or raise, and help distinguish them as a skilled professional in their field.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
What is the best certification for a mechanical engineer?
The best mechanical engineer certification is Engineer In Training Certification (EIT). The Engineer In Training Certification (EIT) is awarded by the National Council of Examiners for Engineering and Surveying.
Here's a bit more background on how to obtain this mechanical engineer certification:
- To become a certified Engineer In Training Certification (EIT), you don't need to pass the exam.
- Lucky you - certification doesn't require more than two years of work experience.
- No renewal for certification, if you earn it once it is valid all time.
What are some of the most in-demand certifications for mechanical engineers?
The most in-demand mechanical engineer certification is Engineer In Training Certification based on all active job postings. Having this mechanical engineer certification will give you access to more mechanical engineer jobs with higher salaries.
What certifications can impact a mechanical engineer career and salary?
The Engineer In Training Certification certification will help you to secure a mechanical design engineer position, which will increase your pay and career trajectory. A mechanical design engineer's average salary is $72,692 whereas mechanical engineers make an average salary of $75,352.
The most common combination of mechanical engineer certifications include: Engineer In Training Certification (EIT), EPA Amusement Operators Safety Certification (EPA), and Certified Energy Manager (CEM).
Online courses for mechanical engineers to earn certifications
1. Quantum Mechanics for Engineers
This Specialization is intended for engineers seeking to acquire fundamental understanding of quantum mechanics which are the basis of modern electrical, mechanical and quantum engineering. Through 3 courses, you will learn (1) basic concepts such as superposition and entanglement of quantum states, measurement in quantum mechanics and uncertainty principle, (2) mathematical tools needed to describe and manipulate quantum states, (3) advanced theory of angular momentum and (4) approximation...
2. Modelling and simulation of mechanical systems
The course provides the principles of modelling and simulation of modern mechatronic systems, which are mechanical systems integrated with several types of sensors and actuators. The aim of the course is to show different methodologies to improve the potential of mechanical systems by transforming them into mechatronic systems based on virtual models. In particular, the lessons will be focused on case studies in three engineering fields: robotics, controlled electro-hydraulic actuators and...
3. Mechanics / Statics - Introduction to Mechanical Engineering
Engineering Solid Mechanics / Engineering Statics...
4. Mechanical design and Product development process
Learn the basic ideas and concepts behind developing mechanical products related to mechanical engineering...
5. Quantum Mechanics
Course 2 of Statistical Thermodynamics presents an introduction to quantum mechanics at a level appropriate for those with mechanical or aerospace engineering backgrounds. Using a postulatory approach that describes the steps to follow, the Schrodinger wave equation is derived and simple solutions obtained that illustrate atomic and molecular structural behavior. More realistic behavior is also explored along with modern quantum chemistry numerical solution methods for solving the wave equation...
6. Basics of Material selection for mechanical design engineers
Learn about the fundamentals of materials and their selection for mechanical engineering design for design engineers...
7. The Complete Engineering Mechanics Course
Master the fundamentals of mechanics, statics and applied physics and then solve real-world mechanics problems...
8. Diesel Engine Fundamentals (Mechanical Engineering)
Learn about the diesel engine! Ideal for Automotive Engineering and Automobile Engineering!...
9. Python for Mechanical Engineers
Learn Python to solve problems in mechanical fields...
10. Engineering Mechanics: Statics
The Study of Objects in Equilibrium...
11. Reliability and Maintenance Engineering - FMEA
Failure Mode and Effects Analysis - A mechanical engineering approach to risk management of plant and machinery...
12. Basics of Tolerance Stack-up Analysis and Fits with GD & T
Learn About Tolerances Stack-up Analysis and about fits in engineering with multiple examples with GD & T for mechanical...
13. Internal Combustion Engine Basics (Mechanical Engineering)
Learn how internal combustion engines work! Learn all of a combustion engine's main components and how they work!...
14. ANSYS Training: An Easy Introduction with Applications
Essential training on solving Engineering Problems from start by using Ansys workbench with examples...
15. Mechanical Engineering and Electrical Engineering Explained
Learn how things work! Boilers, engines, valves, transformers, pumps, learn it all in this constantly growing course!...
16. Abaqus CAE: Learn Static and Dynamic Analysis
Learn Finite element analysis & simulation with Abaqus CAE...
17. Manufacturing Guide for Mechanical Product Development
Learn how everyday physical products are manufactured with no prior experience in engineering...
18. Basics of Sheet metal design for Mechanical design engineers
Learn Sheet metal design, processes and practical design considerations along with Design projects...
19. Ansys Workbench - Analysis Engineering Training Program
If you want to be an Analysis Engineer with Ansys Workbench join this Course !...
20. Design Failure Mode Effect Analysis - Concepts & Practice
Learn about the fundamentals of preparing DFMEA for Mechanical design engineers...