Mechanical engineer jobs in Norfolk, VA - 570 jobs

Merrick is seeking an experienced Mechanical Engineer to join our Energy, Manufacturing & Bioprocessing Business Unit. This full time, direct hire position, will be responsible for engineering, design, coordination, client communications and associated construction administration. This position will be located in our Newport News, VA or Richmond, VA offices. As a Senior Mechanical Engineer with our Energy, Manufacturing & Bioprocessing team, you will work in a dynamic multi-discipline environment with other engineering and technical personnel to ensure overall project goals are met. A hybrid work schedule will be supported. Annual salary range for this position is $102,400 - $132,600. Pay offered may vary depending on job related knowledge, skills, and experience. WHAT YOU'LL DO * Apply your knowledge in Food & Personal Care, Bioprocessing, Oil & Gas, Chemical, Power, Manufacturing and Industrial and shipbuilding facilities/systems (Conceptual Design). * Ensure understanding and compliance with owner's requirements of the facility or corporate standards related to mechanical design. * Confirm and review applicable codes and standards such as, but not limited to, the IBC, ASME, API, PIP and NFPA. * Establish and document the mechanical systems basis of design and in doing so provide clarification, qualifications and design assumptions regarding relevant design issues. * Develop scopes of work based on RFPs and pre-bid meetings with clients. * Work with owner and construction management team to validate construction cost and provide value-engineering options as necessary. * Interpret scopes-of-work and translate them into executable project plans. * Manage project mechanical engineering and design team and oversee all aspects of the mechanical scope related primarily to equipment and piping. * Perform and document engineering calculations related to mechanical engineering for the purpose of selecting code compliant systems and equipment. * Perform sizing and selection of equipment and systems. * Oversee piping group activities related to mechanical equipment, piping and 3D modeling to support mechanical deliverables. * Perform pipe stress analysis utilizing software such as CAESAR II, NozzlePro, etc. * Work with the project team to design a cohesive, technically acceptable, and optimized piping system. * Perform detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents. * Mentor other mechanical engineers and designers.Construction Support: * Contribute to the preparation of construction documents including drawings, specifications, calculations, and equipment datasheets. * Oversee problem solving efforts for field oversights and addressing RFI's. * Perform field inspections and review of reports. * Work with Project Engineer/Manager to ensure that project schedule will be met, and complete documents provided for each deliverable. REQUIRED QUALIFICATIONS * Bachelor's degree in mechanical engineering from ABET accredited program required. * Eight (8)+ years industry experience. * Registered Professional Engineer or ability to obtain your PE within the first year of employment. * Experience with Design/Build and EPC projects. * Experience leading teams of engineers on design projects. * Client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * Pipe stress analysis experience utilizing software such as CAESAR II. * Significant experience designing and installing retrofits and upgrades at manufacturing, industrial, and shipbuilding facilities. * HVAC and plumbing design for industrial facilities. * Knowledge of ASME B31.3 and B31.1, ASME Boiler & Pressure Vessel codes, PIP and API codes. * Experience in managing personnel and project engineering. PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Bachelor's degree in mechanical engineering from ABET accredited program required. * Eight (8)+ years industry experience. * Registered Professional Engineer or ability to obtain your PE within the first year of employment. * Experience with Design/Build and EPC projects. * Experience leading teams of engineers on design projects. * Client projects for this position require U.S. Citizenship. * Apply your knowledge in Food & Personal Care, Bioprocessing, Oil & Gas, Chemical, Power, Manufacturing and Industrial and shipbuilding facilities/systems (Conceptual Design). * Ensure understanding and compliance with owner's requirements of the facility or corporate standards related to mechanical design. * Confirm and review applicable codes and standards such as, but not limited to, the IBC, ASME, API, PIP and NFPA. * Establish and document the mechanical systems basis of design and in doing so provide clarification, qualifications and design assumptions regarding relevant design issues. * Develop scopes of work based on RFPs and pre-bid meetings with clients. * Work with owner and construction management team to validate construction cost and provide value-engineering options as necessary. * Interpret scopes-of-work and translate them into executable project plans. * Manage project mechanical engineering and design team and oversee all aspects of the mechanical scope related primarily to equipment and piping. * Perform and document engineering calculations related to mechanical engineering for the purpose of selecting code compliant systems and equipment. * Perform sizing and selection of equipment and systems. * Oversee piping group activities related to mechanical equipment, piping and 3D modeling to support mechanical deliverables. * Perform pipe stress analysis utilizing software such as CAESAR II, NozzlePro, etc. * Work with the project team to design a cohesive, technically acceptable, and optimized piping system. * Perform detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents. * Mentor other mechanical engineers and designers.Construction Support: * Contribute to the preparation of construction documents including drawings, specifications, calculations, and equipment datasheets. * Oversee problem solving efforts for field oversights and addressing RFI's. * Perform field inspections and review of reports. * Work with Project Engineer/Manager to ensure that project schedule will be met, and complete documents provided for each deliverable.

Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $80,298.00 - $97,905.60 Security Clearance: Ability to Obtain Level of Experience: College This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are HII Mission Technologies is seeking a skilled Mechanical CAD Engineer to design and develop mechanical systems, components, and products. This role requires expertise in Computer-Aided Design (CAD) software to create detailed 2D and 3D models and drawings. The ideal candidate will work with a team of engineers and project managers to ensure designs meet technical specifications, budget, and timeline requirements. This position is contingent upon contract award. What You Will Do Works closely with design originators preparing drawings of unusual, complex or original design. Prepares drawings, which require a high degree of precision. Performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise. Assures that anticipated problems in manufacture, assembly, installation and operation are resolved by the drawing produced. Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent. Provides advice, guidance, and instruction to drafters. May serve as primary point of contact for complex drafting projects. Ability to prepare a complete drawing package without supervision. Calculates Weight and Moments changes as a result of drawing. Calculates electrical loads or heat loads for specific drawing and provide proper breakers, cable type/size or heat exchanger for requirements. Selects proper material for structural members. Assists Electrical/Mechanical engineers for stress/electrical/mechanical calculations. Revises drawings to reflect As-Installed Conditions. Ability to utilize World Wide Web for research. Ability to research existing conditions and where to find that information. What You Must Have 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field. 4 years of additional equivalent experience can be substituted for a BA/BS. Candidate must be a recent graduate with a Bachelor's of Science degree in Engineering or graduating college senior who is in good academic standing and pursuing a Bachelor's degree in Engineering. Bachelor's of Science Degree in Engineering from an ABET accredited program is required prior to starting employment. Candidate must have the ability to lead Site Visits to vessels and shore sites to gather technical data for drawing development. Candidate must be completely knowledgeable with all tools of the trade (CAD program, rulers, compass, divider, calculator etc.) and complete knowledge of drafting and design standards. Candidate must be proficient with at least one electrical CAD software package (e.g., AutoCAD Electrical, SolidWorks Electrical, or similar). Candidate must have a strong understanding of electrical and electronic components, circuits, and systems. Candidate must have knowledge of industry standards for electrical drawings and schematics. Candidate must have excellent attention to detail and a high level of accuracy. Candidate must have strong communication and teamwork skills. Candidate must be able to obtain and maintain a Secret Clearance. Bonus Points For Having! Thorough knowledge of Model Space/Paper Space techniques Complete understanding of Weight Group assignments for Ships Systems and manual for BSCI/ESWBS grouping. Physical Requirements Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances during site surveys. Lifting and moving of materials not to exceed the guidelines set for one man lift. Must be able to perform site surveys and carry a lap top computer. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-###-#### for assistance. Press #3 for HII Mission Technologies.

Team: E35 SUBMARINE ENGINEERING - ADVANCED CAPABILITIES Entity: Newport News Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: Yes, up to 10% of the time Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. The AUKUS SSNA Program is seeking a strong engineer to support the development of the next generation of fast attack submarines. This position will be responsible for working collaboratively with other key stakeholders throughout the SSNA program and will interface with UK's BAE Systems integrated delivery teams (IDTs) to help design portions of the UK and Australian SSNA nuclear-powered submarine. The engineer will need to: · Engage with shipyards, customers and other stakeholders to collect feedback for design incorporation. · Have flexibility with work assignments and may perform duties outside of traditional discipline work scope. · Work with multi-discipline teams on incorporation of SSNA design principles · Solve complex spatial integration issues while meeting system and overall ship requirements · Be able to effectively communicate with both internal leadership and external customer(s). · Be prepared to work in a collaborative and fast-paced environment. · The position will requires individuals who are able to adapt and adjust to support objectives. Must Have Bachelor's Degree and 9 years of relevant exempt experience; Master's Degree and 7 years of relevant professional experience; Ph.D. and 4 years of experience. Newport News Shipbuilding requires a Bachelor's Degree in engineering from an ABET accredited program. Nice to Have • Strong technical background with a comprehensive knowledge of the engineering and design process related to mechanical systems from the concept stage through ship integration. • Team facilitator and innovator, helping to inspire creative solutions to challenging design goals. • Strong communication skills, both written and verbal, to support the development and presentation of technical reports and briefs to NNS leadership or the Navy, and coordinating with vendors and industry partners. • Knowledge of submarine mechanical systems and how they interface with structural, electrical, and other mechanical systems. • An understanding of an array of mechanical products, such as hydraulic and electric actuators, linkages/cam-sliders, pumps and valves, HVAC systems, structural weldments, welded or fastened joints, and others. • Experience in traditional and computer-based methodologies for the design and analysis of components. • The ability to foster a collaborative and inclusive team culture within a diverse set of team members and stakeholders. • Exhibit an openness to continuous learning and development in a dynamic environment. • Operational experience on commissioned or under construction Navy vessels is a plus. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #2 for Newport News Shipbuilding.

is contingent upon contract award* * This position is eligible for a $500 ZelTech Non-Employee Referral fee. Contact ZelTech Recruiters for questions concerning this matter. * Join Our Talent Community to Stay Connected! Job Summary: ZelTech is seeking a motivated and skilled Mechanical Engineer to support the research, design, analysis, and prototyping of next-generation Unmanned Systems for a Government customer. The ideal candidate will contribute to mechanical design and systems integration across the full development lifecycle and play an active role in advancing mission-ready unmanned technologies. Responsibilities: Assist in the design, development, and evaluation of mechanical components and subsystems for unmanned and autonomous platforms. Conduct mechanical and structural analyses, including load, vibration, thermal, and corrosion assessments. Apply Model-Based Systems Engineering (MBSE) principles to develop, analyze, and manage system models, ensuring the integration of modeling and simulation tools and methodologies with systems engineering processes to support requirements development, architecture design, trade studies, and system validation activities. Generate and revise engineering documentation such as CAD models, drawings, parts lists, system diagrams, and manufacturing plans. Support integration and test activities in lab and field environments, including troubleshooting and resolving mechanical issues during assembly and operation. Contribute to the mechanical aspects of UxS prototype development and validation through hands-on fabrication, testing, and performance assessments. Collaborate closely with multidisciplinary teams including electrical, software, and systems engineers to ensure complete and functional system designs. Maintain accurate technical data and deliverable documentation. Evaluate new mechanical hardware and integration approaches to improve autonomy, survivability, and environmental performance. Support trade-off studies, risk assessments, value engineering, and lifecycle cost estimation from a mechanical standpoint. Support development and validation of mechanical models for simulation of UxS performance in variable environments. Integrate simulation feedback into iterative mechanical design improvements. Requirements: Must be a US citizen. Must possess a bachelor's degree in Mechanical Engineering. Must have an active SECRET clearance. Minimum of 3 years of experience in mechanical engineering, preferably for defense, aerospace, or related technical fields. Demonstrated experience applying Model-Based Systems Engineering (MBSE) practices using tools such as Cameo, SysML, or similar, including integration of modeling and simulation to support systems engineering processes. Proficiency in CAD tools such as SolidWorks or AutoCAD. Working knowledge of mechanical engineering principles related to structural design, materials, thermal management, and environmental survivability. Strong problem-solving skills and hands-on experience with prototype fabrication, mechanical assembly, or field testing. Ability to work independently and as part of a cross-functional technical team. Successful background and drug screening check. Preferred Requirements: N/A Physical Demands or Work Environment: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of the time is spent in an office setting. Occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance, vision, color vision and ability to adjust focus. Frequently required to sit, use hands to finger, handle, or feel, and talk or hear. About ZelTech: Founded in 1988 by Ret. Col. Jack L. Ezzell Jr., Zel Technologies is a trusted leader in national security, providing comprehensive research, development, engineering, and operational support to the Department of Defense, the Intelligence Community, and federal agencies. Originally focused on leveraging operational and software expertise to improve time-critical targeting capabilities for the military, the company advanced its capabilities to provide scientific and HUMINT expertise for CBRNE collection and analysis. In the wake of 9/11, Zel Technologies rapidly expanded its capabilities to provide turnkey ISR support services to US Special Operations Forces (SOF), as well as advanced technical & operational intelligence, physical & data science, and engineering support services to the greater Intelligence and SOF Communities supporting global counterterrorism and CWMD operations. Today, Zel Technologies remains at the forefront of intelligence missions, advancing CWMD and global counterterrorism efforts, while also addressing emerging threats posed by near-peer adversaries. Our team remains committed to delivering adaptive, innovative, and cost-effective solutions across multiple domains, in alignment with the mission priorities of the U.S. Government and its partner nations. Our Mission: Through our commitment to innovation and quality, our skilled teams deliver robust, technology driven solutions and insights that empower our customers to overcome complex challenges and achieve their mission objectives. Our Workforce: ZelTech team members represent a wide range of backgrounds, skills, experience, and personalities bound together by common objectives and mutual respect. You will join a caring community of professional, including many military veterans who challenge and support each other in seeking the right solutions to important matters. Benefits: Medical, Dental and Vision Insurance 401k immediate vesting with company match Flexible Spending Accounts Health Savings Account with company contributions Employee Assistance Program (EAP) Bonuses for performance Voluntary life/accidental death & dismemberment Educational assistance and special training programs Voluntary benefits (accidental, critical illness, whole life) Group life insurance (Company paid) Short-term and Long-term Disability Insurance (Company paid) Paid Time Off (PTO), Holiday Leave, Jury Duty, and Military Leave Health and fitness reimbursement Referral bonuses Employee discounts on various services and products Equal Opportunities: ZelTech is an equal opportunity employer and does not discriminate based on race, color, religion, creed, sex, age, sexual orientation, national origin, disability, marital status, military status, genetic predisposition, or any other basis protected by law.

is required to be on-site, in Evansville, Indiana, Monday through Friday. . Applicants must be eligible to work in the United States without visa sponsorship now or in the future. Frontier-Kemper, a Tutor Perini Company, is seeking an Mechanical Engineering Manager for our home office in Evansville, Indiana. About Frontier-Kemper Excellence in Underground and Heavy Civil Construction At Frontier-Kemper, we specialize in heavy civil construction and underground mine development. We are known for our expertise in the engineering and construction of deep shafts and tunnels of all sizes and complexity. Our FKC-Lake Shore division provides design/build/install services for innovative Hoisting and Vertical Conveyance Systems. Our goal is to be the industry's best source, and best value, for complete turn-key construction, engineering and design-build services and related products. Across North America, notable projects include The Purple Line Extensions section 3 in Los Angeles, Water Tunnel number 3 in New York City, Eagle Mountain Gas Pipeline and Kemano T2 tunneling projects in British Columbia, Canada, the Inter-Quarry Tunnel in Leesburg, VA and the Century Mine in Volga, WV. Extraordinary Projects need Exceptional Talent DESCRIPTION: As an Mechanical Engineering Manager at Frontier-Kemper, you will have the opportunity to: * Lead and mentor a high-performing team of mechanical engineers and designers. * Oversee all mechanical engineering and design activities across three operational divisions: Heavy Civil Tunneling, Mine Development, and OEM Equipment Manufacturing (FKC-Lake Shore). * Drive innovation in mechanical systems design, including hoisting systems, material handling, shaft sinking equipment, and custom tunneling components. * Manage project engineering schedules, budgets, and deliverables, ensuring mechanical systems meet cost, performance, and reliability targets. * Serve as the primary technical liaison between internal stakeholders, clients, vendors, and regulatory authorities for all mechanical engineering matters. * Direct and coordinate design integration across mechanical, structural, and electrical disciplines to ensure efficient system performance and constructability. * Implement and improve engineering standards, manufacturing practices, and quality processes to enhance safety, productivity, and equipment lifecycle. * Mentor mechanical engineers and designers, fostering technical growth, innovation, and continuous improvement within the organization. REQUIREMENTS: * Bachelor's degree or higher from an ABET-accredited institution. * Minimum 15 years of progressive mechanical engineering experience. * Minimum 10 years in engineering leadership and/or operations management, with demonstrated success leading cross-functional mechanical teams. * Professional Engineer (P.E.) license preferred. * Proven expertise in mechanical systems design, equipment manufacturing, and integration for large-scale construction or industrial applications. * Strong understanding of fabrication methods, hydraulic and electrical interface systems, and mechanical analysis (FEA, stress, fatigue, etc.). * Excellent leadership, communication, and collaboration skills. * Advanced analytical and computer skills, including proficiency with CAD and mechanical design tools. Frontier-Kemper builds extraordinary projects, and we need exceptional talent. Join us and together we will build the future Equal Opportunity Employer

This role is hands-on and execution-oriented, involving robotic cell setup and tuning, WAAM process development, path planning, integration with power sources, and supporting early production and demos. This position is essential in operationalizing WAAM cells, focusing on building, testing, iterating, and producing rather than purely research and development. Responsibilities: * Setup and tune robotic cells for optimal performance. * Develop WAAM processes and plan paths for robotic systems. * Integrate robotic systems with power sources effectively. * Support early production phases and demonstrations. * Contribute technically to make WAAM cells operational. * Participate in building, testing, and iterating processes. Essential Skills * Experience in robotic programming and industrial robotics. * Proficiency in robotic automation, especially with KUKA or similar systems. * Experience with WAAM (Wire Arc Additive Manufacturing) processes. * Understanding of additive manufacturing techniques. Additional Skills & Qualifications * Experience with any WAAM process variant is acceptable. * Experience with tools like Grasshopper is a plus. * A proactive, 'roll up your sleeves' attitude. Work Environment * The position is on-site, Monday through Friday, from 8 AM to 5 PM, located around shipyards. * The work environment is dynamic and involves a lot of trial and error, making it a unique opportunity to develop a company from the ground up. * This position will provide a clear path to Lead Engineer or Engineering Manager as the team grows. Job Type & Location This is a Permanent position based out of Portsmouth, VA. Pay and Benefits The pay range for this position is $160000.00 - $200000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portsmouth,VA. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

with emphasis on electronics hardware design. This position will work with a lead mechanical engineer as part of a cross-functional team of engineers to design and develop high-performance products. The scope of the position encompasses a range of responsibilities, spanning mechanical design, analysis, and integration of high-performance radio amplifiers, servers, power supplies, loudspeakers, and other electronics. Duties may also include the design, assembly and maintenance of production test fixtures as required. Mechanical engineers will also be responsible for fostering partnerships with suppliers to support engineering development activity. Ideal candidates will show a willingness to learn and a grow their skillset while developing innovative solutions to challenging design constraints. They will show a willingness to take on new or unfamiliar challenges while identifying and overcoming downstream obstacles. They will offer customers unique solutions, enabling the team to maintain a competitive edge in the market space. Ideal candidates will have prior experience in the description above. Essential Functions*: Create 3D models for design feasibility and interference detection Produce 2D manufacturing & assembly drawings from 3D models Interface with outside vendors to source custom machined, sheet metal, die-cut, and injection molded parts Develop and manage mechanical design packages (models, drawings, BOMs) Analyze designs to determine suitability for intended purpose and environments, including (but not limited to) thermal and structural with an emphasis on vibration and shock, fatigue, etc. Perform GD&T tolerance analyses of designs to ensure manufacturability and interchangeability. Directly interface with members of the product development team to produce high quality, dependable products and resolve technical issues. Interpret and apply military, industry and customer standards. Attendance and participation in internal and customer-attended meetings. Conduct root cause analysis investigations for production and field failures Provide input into new products, processes, standards, and plans Provide guidance to production/manufacturing operators in the assembly of production hardware. Must be able to work onsite in Virginia Beach, VA (not remote) Education / Training / Skills / Experience: Qualifications: Education: BS in Mechanical Engineering with 3-5 years prior experience OR Associates/Engineering Technology degree and 5-7 years prior experience Fluency with 3D CAD and ability to create complex solid models and assemblies (Creo, Solidworks, Inventor, etc.) Working knowledge and experience generating 2D dimensional CAD drawings (Creo, Solidworks, Inventor, etc.) Experience designing machined, sheet metal, or injection-molded parts Strong analytical and communication skills Ability to take direction and hunger to learn and grow as an engineer. Experience with Microsoft Office suite (Excel, Powerpoint, Word, etc) Willing to travel occasionally, both domestically and internationally. Preferred Qualifications: Ability to think in 3D Experience using PTC applications, including Creo & Windchill PLM software Experience managing large CAD assemblies (100+ parts) Experience with electronics packaging and integration (PCB's, connectors, harnesses, buttons, switches, etc.) Experience with sheet metal & machined-part design Experience with industry standard coatings & finishes (anodize, powder coat, paint, etc.) Understanding and experience designing for both military and commercial environments Knowledge of designing to meet MIL-STD-810 requirements Self-motivated and ability to work with limited guidance Strong team player who can incorporate input from others and can generate consensus Ability to thrive in a fast-paced and dynamic work environment with an emphasis on accuracy and timeliness. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; must be able to remain in a stationary position 50% of the time; use hands to handle or feel objects, tools, or controls; reach with hands and arms; balance; stoop, kneel, talk and hear. The employee must occasionally lift and/or move up to 45 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must have the ability to travel occasionally both domestically and internationally. *Employees must be able to perform the essential functions of the job with or without reasonable accommodation. This job description is intended to convey information essential to understanding the scope of the position described above and it is not intended to be an exhaustive list of skills, efforts, duties, responsibilities or working conditions associated with the position. Ultralife Corporation is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, color, religion, sexual orientation, gender identity, national origin, citizenship, sex, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at *************

Job Title: Release Train Engineer (RTE) Department: Operations - Services Reports To: RavenTek Program Manager Schedule: Monday - Friday Hours: Full-time, 40-hours/week FLSA Status: Hourly, Nonexempt Clearance: Secret Position Summary The Release Train Engineer (RTE) is responsible for leading agile transformation efforts and coordinating scaled agile development across multiple teams supporting enterprise modernization initiatives. This role ensures delivery alignment with NAVSEA 03D3's digital modernization objectives, optimizing delivery flow, and enabling high-performance team execution. The performance of this position is key to RavenTek's performance on the contract, and therefore RavenTek's mission to support the customer. Requirements Essential Duties and Responsibilities Facilitate Planning Interval (PI) planning, system demos, and SAFe ceremonies across agile teams. Coordinate dependencies, risks, and impediments across the Agile Release Train (ART). Guide cross-functional teams to deliver high-availability solutions (targeting 99.9% uptime). Collaborate with stakeholders to align development efforts with modernization goals. Monitor and report on program metrics aligned to NAVSEA 03D3 strategic objectives. Coach teams on agile best practices, roles, and responsibilities. Support continuous improvement initiatives at the team and train level. Manage relationships and communication across internal and external stakeholders. Integrate cybersecurity and ISO-certified processes into the agile lifecycle. Contribute to digital transformation and agile process adoption in complex environments. Enter actual time worked, once complete, at the end of the day, or no later than 10:00 a.m. the following workday, and submit timesheets at the end of each pay period. Provide Monthly Status Reports (MSR) to the RavenTek Program Manager by the deadline provided. Monitor RavenTek email on a regular basis, at least 3 times per week, and respond accordingly. Complete required compliance training as assigned. Travel on an as needed basis up to 10%. Other duties as assigned. Knowledge and Critical Skills Comprehensive knowledge of scaled agile frameworks (e.g., SAFe) and agile delivery practices. Experience with Agile Release Train coordination, planning, and delivery. Strong facilitation skills for PI planning, retrospectives, and team syncs. Familiar with DevSecOps practices and secure development pipelines. Excellent communication, coaching, and problem-solving skills. Understanding of government or DoD agile environments preferred. Must understand agile development and cybersecurity compliance requirements. Must be comfortable coordinating multiple teams and managing remote or hybrid environments. Ability to drive alignment, resolve conflicts, and enable agile execution across teams. Education & Work Experience Bachelor's degree in Computer Science, Engineering, or related field. Minimum 5 years' experience in agile project management, Scrum Master, or RTE roles. Certifications, Licenses CompTIA Security+ CE. SAFe Release Train Engineer (RTE) Certification, desired. Other SAFe or scaled agile certifications, desired. Special Requirements Must be able to obtain and maintain required security clearance. Work Environment Employee will be working indoors in an office environment with other people. Potential moderate temperature fluctuations. Typical indoor and computer related noise level, and typical office, paper, and equipment related dust. Exposure to video display terminals occurs on a regular basis. Physical Demands To successfully perform the essential functions of the job, the employee needs to be able to sit at a workstation for extended periods; use hand(s) to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear; see to read printed materials and computer screens; mobility to work in a typical office setting. Ability to work on desktop or laptop computer for extended periods of time reading, reviewing/analyzing information, and may be required to provide recommendations, summaries and/or reports in written format. Must be able to effectively communicate with others verbally and in writing. Employee must be able to lift and/or move moderate amounts of weight, typically up to 20 pounds. Regular and predictable attendance is essential. ADA: RavenTek will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990. EEO/AA: RavenTek does not discriminate based on race, color, national origin, sex, religion, age, disability, sexual orientation, gender identity, veteran status, height, weight, or marital status in employment or the provision of services and is an equal access/equal opportunity/affirmative action employer. This job description is not intended to be an all-inclusive list of duties and standards of the position and will be reviewed periodically as duties and responsibilities change with business necessity. Essential job functions are subject to modification. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Full-time Description Job Title: Release Train Engineer (RTE) Department: Operations - Services Reports To: RavenTek Program Manager Schedule: Monday - Friday Hours: Full-time, 40-hours/week FLSA Status: Hourly, Nonexempt Clearance: Secret Position Summary The Release Train Engineer (RTE) is responsible for leading agile transformation efforts and coordinating scaled agile development across multiple teams supporting enterprise modernization initiatives. This role ensures delivery alignment with NAVSEA 03D3's digital modernization objectives, optimizing delivery flow, and enabling high-performance team execution. The performance of this position is key to RavenTek's performance on the contract, and therefore RavenTek's mission to support the customer. Requirements Essential Duties and Responsibilities Facilitate Planning Interval (PI) planning, system demos, and SAFe ceremonies across agile teams. Coordinate dependencies, risks, and impediments across the Agile Release Train (ART). Guide cross-functional teams to deliver high-availability solutions (targeting 99.9% uptime). Collaborate with stakeholders to align development efforts with modernization goals. Monitor and report on program metrics aligned to NAVSEA 03D3 strategic objectives. Coach teams on agile best practices, roles, and responsibilities. Support continuous improvement initiatives at the team and train level. Manage relationships and communication across internal and external stakeholders. Integrate cybersecurity and ISO-certified processes into the agile lifecycle. Contribute to digital transformation and agile process adoption in complex environments. Enter actual time worked, once complete, at the end of the day, or no later than 10:00 a.m. the following workday, and submit timesheets at the end of each pay period. Provide Monthly Status Reports (MSR) to the RavenTek Program Manager by the deadline provided. Monitor RavenTek email on a regular basis, at least 3 times per week, and respond accordingly. Complete required compliance training as assigned. Travel on an as needed basis up to 10%. Other duties as assigned. Knowledge and Critical Skills Comprehensive knowledge of scaled agile frameworks (e.g., SAFe) and agile delivery practices. Experience with Agile Release Train coordination, planning, and delivery. Strong facilitation skills for PI planning, retrospectives, and team syncs. Familiar with DevSecOps practices and secure development pipelines. Excellent communication, coaching, and problem-solving skills. Understanding of government or DoD agile environments preferred. Must understand agile development and cybersecurity compliance requirements. Must be comfortable coordinating multiple teams and managing remote or hybrid environments. Ability to drive alignment, resolve conflicts, and enable agile execution across teams. Education & Work Experience Bachelor's degree in Computer Science, Engineering, or related field. Minimum 5 years' experience in agile project management, Scrum Master, or RTE roles. Certifications, Licenses CompTIA Security+ CE. SAFe Release Train Engineer (RTE) Certification, desired. Other SAFe or scaled agile certifications, desired. Special Requirements Must be able to obtain and maintain required security clearance. Work Environment Employee will be working indoors in an office environment with other people. Potential moderate temperature fluctuations. Typical indoor and computer related noise level, and typical office, paper, and equipment related dust. Exposure to video display terminals occurs on a regular basis. Physical Demands To successfully perform the essential functions of the job, the employee needs to be able to sit at a workstation for extended periods; use hand(s) to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear; see to read printed materials and computer screens; mobility to work in a typical office setting. Ability to work on desktop or laptop computer for extended periods of time reading, reviewing/analyzing information, and may be required to provide recommendations, summaries and/or reports in written format. Must be able to effectively communicate with others verbally and in writing. Employee must be able to lift and/or move moderate amounts of weight, typically up to 20 pounds. Regular and predictable attendance is essential. ADA: RavenTek will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990. EEO/AA: RavenTek does not discriminate based on race, color, national origin, sex, religion, age, disability, sexual orientation, gender identity, veteran status, height, weight, or marital status in employment or the provision of services and is an equal access/equal opportunity/affirmative action employer. This job description is not intended to be an all-inclusive list of duties and standards of the position and will be reviewed periodically as duties and responsibilities change with business necessity. Essential job functions are subject to modification. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Ready to drive financial accuracy and project success? As a Project Engineer, you will track and analyze cost data, ensuring our projects stay on budget. Your expertise in resource monitoring and control, combined with your construction knowledge, will keep our projects running smoothly and efficiently. The Hampton Roads Connector Partners JV (HRCP) consisting of Flatiron, Dragados USA and VINCI has been selected to construct the $3.3BN Design Build project -the largest civil construction contract ever awarded by the Virginia Department of Transportation (VDOT). The project scope across a 9 mile section of the I-64 will include: a new 3.5-mile bridge-tunnel crossing that will accommodate a total of 8 lanes of capacity across the water, replacement of the existing marine approach bridges and the addition of a third lane on I-64 in each direction. The twin 45' diameter 1.5-mile tunnels will be bored by TBM, creating the second largest TBM tunnel opening for a TBM in North America. Apply now and transform your career with us. What you will be doing Meet with engineering and field crews to review production schedule and confirm all materials, equipment and resources. Review all shop drawings, design specifications, material requirements and project data. Provides technical input for project work plan and scheduling. Identify risk elements of production, materials, equipment or process that could negatively impact the budget or schedule. Evaluate daily production, schedule and budget projections to accurately track project performance. Update project schedule weekly for owner and management reporting. Prepare and manage a three-week work plan. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost. Initiate and manage all Requests for Information (RFIs). Remit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported. Manage invoicing with accounting team regarding materials, equipment and subcontractor needs. Review certificates and permits needed to perform work. Review required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel. Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for Bachelor's Degree in a related field. 5+ years construction engineering experience Strong construction experience in a marine environment. Experience in resource monitoring techniques (i.e. cost accounting, basic estimating) and construction technology, process systems and/or structures preferred. Able to identify budget and project costs and recommend options to mitigate project delays. Knowledge of design build and other alternative build techniques. Knowledge of financial reporting methods, quantity tracking methods and cost coding. Knowledge of construction scheduling and production time management preferred. Why work for us Some of the benefits you may be eligible for as an employee are: Comprehensive compensation package and paid time off program Industry leading 401(k)/RRSP Medical/Extended Health Care, Dental, Vision and/or Provincial Medical Wellness benefits & Employee Assistance Program Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $100,000.00/Yr. Salary Max USD $120,000.00/Yr.

Job Description Stampede Ventures, a company within the BSNC family is currently seeking a qualified, highly motivated individual with USACE Construction experience. The candidate will be performing all facets of the Bering Straits East Coast model to include quality control management, submittal tracking, daily reporting, communicating deficiencies to the customer, running multiple sites simultaneously, and other various tasks as assigned. This position is in support of a current contract that supports a project at Fort Myer, Arlington, VA location. Depending on workload, this position may be extended to additional contracts as needed. Applicants will be contacted via phone or email within ten (10) business days of submittal. ESSENTIAL DUTIES & RESPONSIBILITIES Plans and supports (or organizes) projects and sub-projects with limited complexity under the direct supervision of the Project Manager or Director. Drives and monitors daily progress of project work packages and activities to meet the project schedule with project team members in support of the Project Manager. Provides detailed updates to Project Managers, project team members, and project stakeholders. Organizes and maintains project documentation and artifacts, trackers, and reports. Manages and oversees Definable Features of Work Submittal packages and supports Superintendent/PM Supports maintenance and continuous improvement efforts to project management processes and procedures. Engages in and actively volunteers for Continuous Improvement projects/tasks. Must follow all required ISO procedures, comply with all work exposure EH&S training requirements. Must be able to travel infrequently. Miscellaneous duties assigned. Supports overall project quality and reviews all trade contractors' means and methods in accordance with project contract documents with the Project Superintendent. Reviews and analyzes submittal data on the product specifications, scopes of work, plans and engineer reports to determine the finished product meets the quality and reliability expectancy of the Client. Assists the project management team with the RFI process to ensure that all RFIs are properly and timely logged and that the information requests are reviewed and then forwarded to the appropriate people. Supports testing programs will be conducted throughout construction to verify that all materials and installations are as specified; in addition to mandatory "milestone" inspections or tests, supports the QC who monitors all aspects of the construction on a daily basis to verify contract compliance. Assists with plans, coordination, and the quality control program as designed, to ensure continuous production of projects are consistent with established standards by performing the QCM duties personally or through subordinate supervisors. Performs random project site audits for all stages in the production process and inspects materials for specifications and contract compliance. Interacts effectively with the NAVFAC Quality Control personnel to ensure. Previous Federal construction experience is preferred. NON-ESSENTIAL DUTIES Have existing relationships with Federal government customers in the Southeast Region Previous experience working with 8(a) companies. Other duties as assigned. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION Required (Minimum) Qualifications One year experience supporting a Federal or commercial projects. Must be US Citizen USACE Quality Control Certification OSHA 30 Certification (can be obtained after employment) Current or ability to get a security clearance is preferred. Current certifications for First Aid and CPR Knowledge, Skills and Abilities Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 Valid Driver's License Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce. Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Knowledge of Local vendor and subcontractor companies. Must be organized and have excellent communication skills. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees must always maintain a constant state of mental alertness. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee often works in an office environment. The employee is required to visit job sites regularly and will be subject to a lift and/or move up to 25 pounds. The employee is occasionally required to stand, climb or balance and stoop, kneel, crouch or crawl. During visits to job sites, the employee may be exposed to extreme cold or hot weather conditions. SUPERVISORY RESPONSIBILITIES Limited supervisory responsibilities will be required for this position. ADDITIONAL QUALIFYING FACTORS As a condition of employment, may be required to pass a pre-employment drug screening, as well as have acceptable reference and background check results to obtain access to military base. Must have reliable transportation to/from work as a necessity and must be able to obtain access to military installations. Shareholder Preference. BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Norfolk, Virginia, US Engineering 12253 Full-Time must have the ability to obtain and maintain a SECRET Security Clearance Yes - May Consider Occasional/Part Time Teleworking for this position $63881.84 - $106470.54 Description & Qualifications** **Position Description & Qualifications** If you're motivated by high-impact work that directly supports the U.S. Navy, **Serco** is seeking a Junior Engineer to join a highly experienced team in **Arlington, VA** supporting the development, construction, and sustainment of U.S. Navy surface ship systems. In this role, you will provide supervised engineering, production, and testing support across hull, mechanical, electrical, and total ship systems, including ship surveillance, waterfront engineering, inspections, and construction oversight. This position offers the opportunity to work alongside Navy, shipyard, and industry partners to ensure ships are built and maintained to the highest technical and safety standards, directly contributing to fleet readiness and the safety of our Sailors. **In this role, you will:** + Under supervision provide support to clients developing and maintaining U.S. Navy surface ships systems and associated subsystems. + Provide production and testing support including engineering support for hull, mechanical and electrical systems; total ship engineering; ship surveillance; and all types of waterfront engineering and inspections. + Review shipbuilder work packages, conduct photo documentation, develop databases allowing searches for key information in written correspondence. + Review drawings, Initial Change Proposals (ICP), Engineering Change Proposals (ECP), waterfront changes, work items, design reviews condition reports and trial cards. + Reviewing initial designs, developments, and analysis of new ships and/or ship systems. + Assist in the development of designs for current and conceptualized ships, systems, and equipment. Evaluate designs for feasibility. + Reviewing ECP packages for completeness and provide recommendations. + Assessing compliance with Naval regulatory and design standards. + Interfacing with stakeholders and cross functional teams to ensure necessary resources are available for ship/system. + Participating in Gas Turbine design meetings. + Reviewing qualification test procedures and participating in qualification testing and trials. + Researching new technology and/or development tools to remain informed of current technology. + Maintaining communications with SUPSHIP, NAVAIR and other commands, including laboratories and support contractors, in resolving technical issues impacting (or have potential to impact) the design or performance of the ship class. **To be successful in this role, you will have:** + Bachelor's degree in naval architecture, ocean engineering, mechanical engineering, marine engineering, systems engineering (ABET-Accredited), or a related discipline. + Understanding of ship and ship system design principles and practices. + Familiarity with maritime HM&E systems and Naval construction process. + Applicant must be highly skilled in both oral and written communications and be capable of productive and efficient work with limited or no supervision. + Applicant must be proficient with Microsoft Office programs. + Candidate must have the ability to obtain and maintain a SECRET Security Clearance + Travel Requirement ~10% **Additional desired experience and skills:** + Experience working with applicable regulatory, commercial, and military standards and classification society rules desired. + Experience working with ship system performance assessment and prediction methods a plus. + Knowledge of DDG 51 acquisition program and processes a plus. + Experience working with Navy ship and ship system design principles and practices. + Familiarity with maritime fuel systems, Gas Turbine Propulsion, Gas Turbine Generators, Saltwater Cooling systems, damage control systems and auxiliary systems. + Former Navy gas turbine shipboard auxiliary or main propulsion experience a plus. + Experience working with applicable regulatory, commercial, and military standards and classification society rules desired. _If you are interested in supporting and working with our military and sailors and a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career!_ **Company Overview** Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************ . If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email ********************* . Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. **Pay Transparency** Our Total Rewards package includes competitive pay, performance-based incentives, and benefits that promote well-being and work-life balance-so you can thrive both professionally and personally. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance. Program availability may vary based on factors such as contract type, location, hire date, and applicable collective bargaining agreements. Salary range: The range for this position can be found at the top of this posting. This range is provided as a general guideline and represents a good faith estimate across all experience levels. Actual base salary will be determined by a variety of factors, including but not limited to, the scope of the role, relevant experience, job-related knowledge, education and training, key skills, and geographic market considerations. For roles available in multiple states, the range may vary to reflect differences in local labor markets. In addition to base salary, eligible positions may include other forms of compensation such as annual bonuses or long-term incentive opportunities. Benefits - Comprehensible benefits for full-time employees (part-time employees receive a limited package tailored to their role): + Medical, dental, and vision insurance + Robust vacation and sick leave benefits, and flexible work arrangements where permitted by role or contract + 401(k) plan that includes employer matching funds + Tuition reimbursement program + Life insurance and disability coverage + Optional coverages that can be purchased, including pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Employee Assistance Plan To review all Serco benefits please visit: ******************************************* . Serco complies with all applicable state and local leave laws, including providing time off under the Colorado Healthy Families and Workplaces Act for eligible Colorado residents, in alignment with our policies and benefit plans. The application window for this position is for no more than 60 days. We encourage candidates to apply promptly after the posting date, as the position may close earlier if filled or if the application volume exceeds expectations. Please submit applications exclusively through Serco's external (or internal) career site. If an applicant has any concerns with job posting compliance, please send an email to: ******************** .

We are currently seeking an experienced Project Engineer II to join our Stormwater Group in our Virginia Beach, Virginia office location. Essential Duties and Responsibilities of a successful candidate include but are not limited to: * Perform hydrologic and hydraulic analyses to investigate storm drainage issues and support stormwater management designs. * Provide engineering assistance for the design of best management practices (BMPs), low impact development (LID) solutions, natural stream restoration, and other stormwater related projects. * Understanding of stormwater management, erosion and sediment control. * Provide technical expertise and check accuracy of all completed work. Assure that a QA/QC review is completed at the appropriate stages of each project. * Prepare project specifications to include materials, installation, inspection and payment of items specific to a project. * Conduct background research on technical issues and write clear reports and memorandums. * Complete calculations using engineering formulas and skills and/or utilizes computers in order to solve problems. * Assist in the preparation of engineering and construction cost estimates. * Complete field observation, inspection and data collection duties as directed * Communicate with clients and internal design team as directed by the Project Manager. Skills/Requirements of a successful candidate include but are not limited to: * B.S. degree in civil engineering or equivalent with work experience. EIT preferred. * 3 to 6+ years' experience in environmental/civil engineering including experience in stream and wetland restoration design. * A demonstrated ability to manage multiple projects at the same time. * Working knowledge of CADD software (Civil 3D preferred).

Job DescriptionSalary: Retroaim is looking for a Project Engineer that will play a critical role in planning, coordinating, and estimating concrete cutting and core drilling projects. This position requires strong technical knowledge of concrete cutting methods, equipment, and safety standards, combined with excellent project management skills to ensure timely and cost-effective delivery. Key Responsibilities: Assist in developing project scopes, schedules, and budgets. Coordinate with clients, contractors, and internal teams to ensure project requirements are met. Prepare and review technical drawings, specifications, and work plans. Create construction estimating on various tasks depending on what the customer would like within concrete drilling and cutting. Provide engineering expertise for concrete cutting and core drilling operations. Recommend appropriate cutting techniques, tools, and equipment based on project specifications. Ensure compliance with industry standards and safety regulations. Conduct site visits to familiarize yourself with the proper tools and techniques to provide an adequate estimate. Ensure adherence to safety protocols and quality standards. Maintain accurate project documentation, including daily logs, progress reports, and change orders. Track material usage, labor hours, and equipment performance. Assist in estimating project costs and managing budgets. Identify cost-saving opportunities without compromising quality or safety. Qualifications/Additional Skills: Education: Bachelors degree in civil engineering, Construction Management, or related field (or equivalent experience). Familiarity with diamond cutting tools, wire saws, wall saws, and core drilling equipment is highly desired. Strong understanding of structural concrete and reinforcement. Proficient in reading blueprints and technical drawings. Excellent problem-solving and communication skills. Knowledge of OSHA safety standards and industry best practices. Exposure to Microsoft Office Suites and any additional construction software is a plus. Ability to work in fast-paced environments and manage multiple projects. Strong leadership and team coordination skills. Willingness to travel to job sites as needed

Job Description Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for "the best at what they do" to join our team and help us grow. Strong attention to detail is essential as you will be fully engaged from the first day. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and a 401(k)-retirement plan with company match. We are always looking for top-talent and we look forward to new-thinkers and team-players joining our company! *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced Engineer to support our Engineering department and Fleet Services Group. The successful candidate will be responsible for project management, installations, repair, and modernization initiatives onboard ships. Essential duties & responsibilities include, but are not limited to the following: Monitors and controls activities at job sites, office, and/or onboard vessels. Ensures projects/initiatives progress as scheduled and contract specifications are adhered to. Inspects construction site daily and works with contractors to schedule deliveries. Experienced with NAVSEA Standard Items, 9090-310 Technical Specifications, NSTM standard concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Works with Senior Management, Program Managers and Project Leads with both Surface and Submarine Alterations, Repair or Fleet Modernization projects. Ensure projects and initiatives progress as scheduled and contract specifications are adhered to. Interface with clients and customers regarding tasking. Perform duties outside of specialty to complete work assignment. Requirements: Must possess a bachelor's degree in engineering from an ABET accredited college or university. Target experience of five (5) years of experience in design, installation, testing and/or repair of ships and ship systems aboard US Navy, Military Sealift Command and/or US Coast Guard ships. Direct experience in ship repair and installation of Hull, Mechanical and Electrical (HM&E) systems and equipment on surface ships and submarines. Ability to perform detailed ship checks involving collection of data necessary to develop the applicable design modifications for systems and components required to support the system design change Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is a must. Must have or have the ability to obtain a SECRET clearance Must have the ability to obtain base access and security credentials Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Travel may be required within and outside of the continental United States. Due to export control regulations, this role is open to U.S. citizens only. Additional Requirements: Organizational skills and attention to detail Strong communication skills Ability to work independently and execute multiple assigned tasks Proficient knowledge of Microsoft Project and Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) Physical Requirements: Exposure to open-air environments, including noisy, hot, and cold conditions. Required to visit project sites aboard ships and rigs, both onshore and offshore. Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required. Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components. Exposure to sound levels exceeding 100 decibels. Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment. May work in confined spaces with limited ventilation. Requires prolonged periods of sedentary work, including sitting and/or standing. May be required to operate machinery, power tools, and/or heavy equipment. Must be able to communicate effectively to exchange and comprehend information. Frequent exposure to extreme weather conditions, including high heat and extreme cold. Must be able to lift and carry 30 lbs. or more, depending on the task requirements. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to *********************** See all of our latest opportunities at *********************** or follow us on our LinkedIn page at ********************************************************** Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran”. “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Ready to Take the Next Step in Your Career to Project Management? Curtin Maritime offers hands-on field training designed to equip you with the leadership, management, and problem-solving skills essential for success. Our comprehensive training and coaching programs are tailored to develop exceptional project managers who lead with confidence and competence. Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, these core values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are a dynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing places on earth. THIS ROLE: The Project Engineer is the leader responsible for all aspects of production & survey within our dredging projects including providing technical/operational expertise to the operations team. This includes the oversight of all surveys to both the operations team and the admin team. In addition, the Project Engineer administers project survey requirements from completion to final approval. The Project Engineer directs all dig strategy with the dredge management team. The Project Engineer is also responsible assisting the Project Manager in establishing, maintaining and performing all duties required to provide administrative support for dredging project jobsites. **This role follows a 2 week on / 2 week off rotational schedule. This role will require travel to different projects sites and our corporate HQ/shipyard in Long Beach, CA** WHAT YOULL DO: Manage all survey assets Develop dig strategy with project management Analyze survey data to advise/plan daily dredge plan Responsible for all technical/operational aspects of survey in the assigned project within the guidelines set by the Project Manager and customer Generate daily survey related deliverables and discuss survey results with Project Manager and crew Perform survey related calculations Define, generate, and review project requirements documentation within defined scope Develop work plans and hazard analysis to ensure safety and efficiency Resolve of engineering, material and planning issues Ensure implementation of improved engineering processes Work with purchasing department on vessel specific purchases needed which includes sourcing from appropriate vendors and arranging the shipment Track, analyze and generate reports of project progress and productivity Ensure compliance with all relevant regulatory agencies Calibrate, troubleshoot & maintain survey and vessel positioning systems WHO YOU ARE: Certifications and Other Requirements Bachelor's degree in Engineering (any discipline) or Construction Management preferred. 1+ years dredging experience as a Project Engineer or similar role USACE Construction Quality Management for Contractors (CQM-C) Certification RMS competency and ability to update daily reports for clients OSHA 30 Primavera P6 Certification Develop SOPs for survey and engineering team Understanding of pump dynamics, velocities, pipeline routes, and booster placements. Draft and update project schedules in conjunction with Quality Control Manager Generates volumes for pay applications Provides survey updates for client meetings and can act as lead for client meetings in absence of PM or QCM Proficient in setting up survey equipment such as GPS positioning on tugs and dredge, base stations, and tide gauges with no assistance. Able to calibrate a survey boat by manipulating settings, verifying equipment communication, perform bar checks, etc. Ability to interpret project plans and specs to produce survey deliverables with minimal assistance. Develops and maintains master volume sheets for projects recording dig/pay, volume remaining, shoaling, slopes, etc. Plans out and coordinates all acceptance, progress, and third-party surveys. Competent in drafting contract RFIs Assists in scheduling & staffing of field engineers Ability to fill in as Project Manager as needed Handles auxiliary management duties when needed such as client interface, fueling appointments, delay troubleshooting, and subcontractor management. Document and produce data/write ups for change orders, differing site conditions, REAs, etc. Generates and submits pay applications in conjunction with Quality Control Manager Set up and deploy new dredging and survey equipment Analyze geotechnical data Develop production estimates for bids Acts as a leader and mentor to other Project Engineers & Field Engineers, providing training and coaching on engineering and survey duties Computer literate and proficient in Microsoft Office desktop programs, especially MS Excel Skilled with AutoCAD, Hypack and/or other Survey software Ability to operate small marine vessels preferred Technical understanding of construction and maintenance of marine vessels Ability to read and understand technical manuals and drawings, ABS, USCG rules Valid Drivers License with clean driving record required Valid TWIC Aptitudes Experience in identifying and anticipating design/production work sequence conflicts required. Excellent written and oral communication skills required Demonstrated knowledge of scheduling, possess an ability to monitor progress to schedule and adhere to strict deadlines required Willingness and ability to spend time onboard the vessel going up and down staircases and vertical ladders required Strong negotiation skills both verbal and written Work outside as well as inside in an office environment. Must meet fit for duty requirements upon job offer (pre-employment physical and drug test) The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces Must be comfortable entering tanks and other confined spaces Ability to lift up to 50 pounds unassisted Additional Requirements Rotational 2 weeks on and 2 weeks off Willingness to travel to project sites or Long Beach yard as needed. Ability to work on tight deadlines for project needs outside normal business hours. At Curtin Maritime, were committed not only to professional development but also to work-life balance. Our management team benefits from a consistent, even-time schedule, competitive salary, and a comprehensive benefits package. Join us and take the next step toward realizing your full potential. Apply today. What we offer: Competitive Compensation Generous benefits package including: Medical Dental Vision Short-term Disability AD&D/Life Insurance 401k (with company match) Additional option to elect incremental Life Insurance for employee and dependents, and choice to elect Health and/or Dependent Flexible Spending Account. Curtin Maritime is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Brief. Our team is looking for a motivated Project Engineer to assist Project Managers and Sr. Project Engineers with the planning and daily execution of the construction projects. Responsible for maintaining certain aspects of the project schedule as assigned by the Project Manager, by managing the process of submittal approvals, coordinating the timely delivery of materials, maintaining schedules and budgets to ensure delivery of successful projects to owners, in the safest manner possible, on time and on budget with the desired level of quality. This role requires excellent communication skills, as you'll be assisting senior leadership in coordinating with various project stakeholders, including Project Superintendents, Project Managers, Foreman, and Field Personnel. To succeed, you must ensure you are striving to support MEB's core values every day and that quality, health, and safety standards are your top priority. Whether you are an entry-level engineer eager to start your career or a seasoned professional looking to further your expertise, we offer opportunities for personal growth, hands-on training, and valuable experience. Join us if you are passionate about construction engineering and committed to excellence! Core Areas of Responsibility. * Perform detailed review of the project documents in search of potential issues, conflicts, and discrepancies prior to the start of construction. * Participate in the review and evaluation of prime, subcontractor and supplier project submittals. * Develop subcontractor and supplier scope of work documents and draft detailed Subcontracts and Purchase Orders * Full cycle responsibility for project Requests for Information (RFI's) and maintain RFI tracking logs, to include updating specs. * Assist in the surveying and layout of construction site elements, maintaining project communications, and reviewing/approving payables. * Maintain and file project communications * Maintain and track status of the project "red-line" and digital As-Built documents as required per contract requirements * Secure and assemble all project closeout materials from subcontractors and suppliers including guarantees, warranties, As-Builts, and Operations & Maintenance Manuals * Assist with the scheduling, coordination and documentation of all project equipment start-up, commissioning, performance testing and owner training. * Proactively builds and fosters positive relationships with Project Owners, Design A/E's, MEB team members and our trade partners. Skills You Possess. * Completion of 4-year Bachelor of Science degree in Engineering, Building Construction, Construction Management, or equivalent combination of technical/military training and/or experience. * Detail and deadline-oriented with strong computer, and interpersonal skills, and the ability to work independently and in a team environment * Strong desire to learn and advance in the construction field * Travel up to 20% Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

Title: 00979 - Capital Project Engineer State Role Title: Architect/Engineer I Hiring Range: Commensurate with credentials and experience $80,000-$90,000 Pay Band: 5 Agency Website: *********** Recruitment Type: General Public - G Job Duties Provide professional project management of complex higher education academic and research projects. Project types include new construction, fit out of shell spaces, renovations, and refurbishment of existing buildings and infrastructure. Manages project team in directing design and construction professionals, collaborating with campus partners, and administering contracts necessary to meet project goals, while maintaining budget, schedule and timely reporting to leadership. Reports to work as directed during emergency closings. Minimum Qualifications • Knowledge of operations and maintenance of institutional facilities including building and utility systems. • Understanding of design criteria and building codes. • Knowledge of facility design and design process, cost estimating, building codes, construction documents, construction materials and methods. • Demonstrated ability to manage all aspects of multiple design and construction projects. Well-developed capacity for analysis and evaluation of complex design, construction and code issues. • Ability to plan, organize, and direct multiple work assignments. • Ability to provide excellent customer service and interact positively with all co-workers, faculty, staff, and students. • Working knowledge of project management software and other software including database, spreadsheet, presentation and desktop publishing programs. • Experience interacting with code officials. • Ability to communicate effectively, both orally and in writing, and maintain effective working relationships. • Ability to monitor and or maintain quality control standards. • Must be physically fit to climb a ladder, engage in moderate amounts of standing and walking to tolerate fluctuating temperature conditions. Additional Considerations N/A Special Instructions You will be provided a confirmation of receipt when your application and/or résumé is submitted successfully. Please refer to “Your Application” in your account to check the status of your application for this position. Contact Information Name: Norfolk State University Phone: ************ Email: E-MAILED APPLICATION MATERIAL IS NOT ACCEPTED In support of the Commonwealth's commitment to inclusion, we are encouraging individuals with disabilities to apply through the Commonwealth Alternative Hiring Process. To be considered for this opportunity, applicants will need to provide their AHP Letter (formerly COD) provided by the Department for Aging & Rehabilitative Services (DARS), or the Department for the Blind & Vision Impaired (DBVI). Service-Connected Veterans are encouraged to answer Veteran status questions and submit their disability documentation, if applicable, to DARS/DBVI to get their AHP Letter. Requesting an AHP Letter can be found at AHP Letter or by calling DARS at ************. Note: Applicants who received a Certificate of Disability from DARS or DBVI dated between April 1, 2022- February 29, 2024, can still use that COD as applicable documentation for the Alternative Hiring Process.

Synigent Technologies is searching for a Manufacturing Engineer, with strong CNC experience for a client in Chesapeake VA. . Minimum requirements include: AA degree in Mechanical Engineering 10 years experience as CNC programmer (turning, milling, drilling, etc) Lean manufacturing experience Ability to prepare and maintain process sheets, process maps, in a Poka-Yoke environment Basic understanding of Statistical Process Control Ability to read, understand, and create complex engineering drawings and blueprints Sound like you or someone you know? Let's connect today.