Mechanical engineer jobs in Sanford, FL

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Job Description Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

McKim & Creed is a unique, employee-owned firm. First and foremost, we value people. This means we not only hire great talent, we've also created an environment where each individual can grow, flourish and apply innovative thinking. As a result, we've created a world-class team of professionals within a nimble organization. That's what our clients want. That's why we succeed. Our clients hire us because of our people. McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group to support our projects in and around Orlando. If you want to work at a company that will help you become the best you can be, we're glad you found McKim & Creed. YOUR DAY-TO-DAY WILL INCLUDE: * This person works as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of Mechanical (HVAC, plumbing and fire protection) systems for facility types including healthcare; higher education; institutional; federal, state and local government; K-12 education and support; and other commercial/industrial facilities. * Serves as a primary mechanical design engineer for projects, producing design/construction drawings under the supervision of more-senior staff. * Assists with evaluations of existing mechanical equipment/systems and prepares design computations and assessments. * Generates mechanical design/construction drawings utilizing REVIT and AutoCAD software. * Observes mechanical construction progress as directed by more senior staff and generates field observation reports. * Is responsible for completion of mechanical design tasks within budget and on schedule. * Assists with designs, writing of reports and correspondence with other discipline professionals, as well as representatives of the Client organization to help complete work efficiently. WHAT YOU NEED: * Bachelor's Degree in Mechanical Engineering -OR-- Bachelor's Degree in Architectural Engineering with Mechanical focus, from an ABET-accredited university. * 2-4 years of documented applicable experience, working on facilities for healthcare; higher education; institutional; federal, state, and local government; K-12 education & support; and other commercial/industrial facilities. * Resides in the greater Central Florida area, such as within one of the following counties: Orange, Seminole, Volusia, Brevard, Osceola and Lake; Or is willing to relocate to the aforementioned counties. * Engineer Intern Certification * Ability to work in person a minimum of three (3) days weekly in the local office located in east Orlando, Florida right next to the UCF campus. * Ability to travel to project locations and client meetings throughout east and north Florida. Travel beyond this primary area may occasionally also be required. * Significant applicable experience using Autodesk REVIT and AutoCAD MEP. * Strong knowledge of the Microsoft Office suite of software, as well as Bluebeam. * Strong knowledge of the FBC Mechanical code and ASHRAE standards commensurate with their years of experience. * Ability to climb ladders and perform typical field survey duties of existing facilities. * Possess a valid driver's license and an acceptable motor vehicle and criminal record. * Pass a drug test. WHAT MAKES YOU STAND OUT: Desired Professional Traits: * A process-oriented individual with strong organization, technical and communication skills. * A solid communicator, able to take and understand directives from Project Manager and Senior Mechanical Engineer and coordinate efforts with design team. * Able to complete work consistently with flexibility to accommodate varying project demands. * Maintains a high level of precision and accuracy and is methodical in their approach to work. * Has a high technical aptitude, interested in technology and staying current in their field. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: * Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned * Competitive pay + paid holidays, bereavement and parental, medical, and military leave * Multiple office locations to work from: Stick close to home or travel for a change of scenery * Growth opportunities & training: Grow confidently in your career with our mentoring & training options * Professional development: Tuition reimbursement, early career professional program, online courses & more * Work that makes a difference: See the direct impact your work has on our communities * Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

Become a part of ENERCON as a Mechanical Design or Mechanical Project Engineer. We are seeking talented Mechanical Engineers at all experience levels, from early-career professionals to principal engineers. Our Mechanical Engineer career path has many options. You can bring your experience to our mid-level and senior roles, or step into a principal engineer position where you'll lead and mentor others. We continually invest in our employees and provide training and tools for advancement, development, and career progression-whether you prefer a path to become a subject matter or technical expert, a people leader, a project manager, or a leader in business development. We can discuss full-time, part-time, or temporary roles. Whether you are just starting your career or bring years of experience, we encourage you to explore our exciting opportunity and become part of our innovative and impactful team. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Data Center Mission Critical (DCMC) Energy Group (EG) Responsibilities A typical day may include being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Other days you may be leading simple design projects such as valve replacements or writing engineering reports (such as corrosion studies or pros and cons of different equipment). You will also: Deliver High-Quality Engineering Documents: Prepare accurate and error-free drawings, sketches, calculations, and analyses that meet industry codes, standards, and regulations, ensuring client needs are met with precision Adhere to Standards: Develop engineering documents in alignment with client, ENERCON, and regulatory requirements while following established procedures, processes, and project directives Stay Ahead of the Curve: Keep your knowledge sharp and current with industry codes, standards, safety culture principles, and advanced design techniques tailored to the nuclear sector Commit to Excellence: Produce engineering deliverables that meet stringent quality assurance standards, aligning with project scopes and exceeding client expectations Build Lasting Client Relationships: Establish trust and rapport with clients through clear communication, professional interactions, and the delivery of exceptional engineering solutions Collaborate Across Disciplines: Work closely with other teams to ensure designs are comprehensive, integrated, and consider the needs of all disciplines involved #LI-AS1 Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work Qualifications This position covers a range of internal levels. Minimum qualifications for our mid-level position are shown below: Bachelor's Degree in Mechanical Engineering from an accredited university Minimum 3 years of experience with design of mechanical systems Experience in one of the following industries highly preferred: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Proficient in Word and Excel Please note: Some roles may involve work on federal contracts that require employees to be citizens of the United States. For those specific positions, only applicants who can confirm their status as U.S. citizens will be considered. Senior Engineers typically have 7 years of post-graduate experience in a related role Principal Engineers typically have 10 years of post-graduate experience in a related role If you do not have 3 years of experience quite yet, we will transfer your information to our early talent team or you can view those openings here: Early Talent Opportunities Pay Range USD $90,000.00 - USD $177,450.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

About the Role and Team We create happiness.” That's our motto at Walt Disney Parks and Resorts, and it permeates everything we do. At Disney, you'll help encourage that magic by enabling our company to push the limits and build the never-before-seen! Are you ready to join this team and make an impact? We are currently looking for a highly motivated Systems Engineer - Mechanical Analyst with a BS/MS and 1+ year work experience to join our team of Systems Engineers on the Modeling, Simulation, and Training Tools team at the Walt Disney Company. In this role, you will lead and contribute to technical projects focused on the simulation and analysis of mechanical systems for Walt Disney Imagineering, Ride and Show Engineering, Engineering Services, and Entertainment for Ride, Show, and Animatronic Systems. These services will include developing rigid multi-body dynamic models (MATLAB/Simulink/Simscape); data preparation and analysis (MATLAB); and working with a team of engineers leading small technical projects. This is a 24-month Project Hire role based in Lake Buena Vista, FL, reporting to the Director of Design and Engineering. What You Will Do On any given day, as a Systems Engineer - Mechanical Analyst, you might: Lead and contribute to technical projects focused on the simulation and analysis of animatronics and show systems. Prepare models for rigid-body dynamic analyses (e.g. CAD preparation in SolidWorks defining system kinematics and dynamic properties). Build and run rigid-body dynamic models for simulation (e.g. MATLAB/Simulink (Simscape Multibody). Prepare reports, documentation, and presentation materials summarizing analysis results and communicating results to partners. Collaborate with mechanical design teams, other analysts, and creative partners on the technical details of the simulations. Work with our Walt Disney Imagineering (WDI) and Facilities and Operational Services (FOS) partners to communicate requirements and results from system simulations. Prepare proposals for stakeholders including scope of work, budgets, and schedules. Track and advise project teams and leadership on project schedule and budget trends. Support tool development for automation of analysis processes through coding, testing, and validation Required Qualifications & Skills Here's what you need to be successful at this job: Strong physics and mathematics academic background. Proven ability to lead small analysis or simulations projects working independently or overseeing a small team of supporting engineers. Proficiency in CAD Software (SolidWorks highly preferred). Experience in dynamic modeling and simulation software (MATLAB/Simulink Simscape Multibody highly preferred). Experience with scripting and programming in software languages such as Python or MATLAB. Strong interest in systems engineering and software (automation, coding, and debugging). Familiarity with both software and mechanical version control systems (Git, PDM, Upchain or similar tools). Preferred Qualifications It would be great if you also have: Experience with working on animatronic systems or other related work in the entertainment industry. Familiarity with Agile software development practices, including scrum, sprint planning, retrospectives, etc. Proven Professional Engineer License or equivalent. Demonstrated understanding of the Software Development process. Experience with Finite Element Analysis (Ansys or SolidWorks). Education Bachelor's degree in Electrical engineering, computer science or other related field. Preferred: Professional Engineering License in Electrical or Computer Engineering. Preferred: Master's degree in electrical engineering, Computer Science or other related field. Additional Information Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** This position will remain open from 12/15/25 to 1/4/26. #dxfos #DXMedia #li-dm2 Job Posting Segment: Worldwide Safety, Health, Engineer & Sourcing Job Posting Primary Business: Global Engineering & Technology (WSHES) Primary Job Posting Category: Ride Controls Systems Engineering Employment Type: Full time Primary City, State, Region, Postal Code: Lake Buena Vista, FL, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-12-16

We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations * We are looking for people that fit our values * problem solvers; people that can innovate solutions to real-world problems * intellectual curiosity and passion for engineering * internally motivated; we do not micromanage * highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements * BSME +3 years of experience OR MSME from an Accredited University * GPA not less than 3.3 at all degree levels * US Citizenship required due to strict ITAR regulations * Strong understanding of mechanical engineering fundamentals * Interest in hands-on engineering work in one or more focus areas of Mainstream * Prior experience in design, test, and/or analysis with an interest in learning more about each * ANSYS experience with willingness to verify design through test * Knowledge of testing equipment and setups is a plus * CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Hanson Values Integrity | Commitment | Quality | Relationships | Innovation If you're looking for a firm that encourages innovative thinking and challenges you every day, with an opportunity to learn and advance, a career at Hanson is right for you. The belief in sustainability within our company's practices creates a focus on client success and partnerships that are important to our communities and our environment. A Day in the Life of a Senior Energy Engineer at Hanson Here's a snapshot of what you would do in this role: Lead and support energy-related projects including Energy Roadmaps, Energy Audits and Assessments, Carbon Studies, and Retro-Commissioning. Assist Business Development Manager with customer relationships and business development in energy, sustainability, and resiliency markets. Serve as a subject matter expert (SME) for energy reduction and decarbonization efforts. Coordinate with internal teams, external stakeholders, and vendors to execute energy projects. Lead meetings and create presentations for internal and external stakeholders. Stay current on energy regulations and technologies, applying innovative solutions to meet compliance and performance goals. Track project performance and provide regular updates to clients and senior management. Support Hanson Project Managers with schedule, budget, billing, and earned value processes. Support Hanson Discipline Manager with the supervision and empowerment technical personnel to meet HR standards, foster resource redundancy, and ensure consistent performance. Conduct training sessions and workshops on energy management strategies. Author technical articles or present at industry conferences. Other duties as assigned. Ability to travel up to 30%. What We're Looking For We feel the following qualifications would set you up for success in this role: Skills: Strong client engagement capabilities. Demonstrated ability to lead and manage multiple energy projects simultaneously. Excellent planning, organizing, analysis, and critical thinking skills. Strong written and verbal communication skills, with the ability to present complex technical information clearly. Proficiency in energy modeling, cost savings calculations, and utility/government rebate programs. Familiarity with Building Management Systems (BMS), including GUIs and programming logic. Understanding of energy transition technologies such as wind, solar, and microgrids. Ability to work independently and collaboratively in a fast-paced environment. Discretion with sensitive and confidential information. Education/Experience: Bachelor's degree in Mechanical Engineering, Electrical Engineering, Energy Management, or a related field. Minimum 8 years of experience in engineering focused on energy demand reduction, sustainability, or decarbonization. Professional Engineer (PE) license or ability to obtain one within 6 months. Supervisory experience with technical personnel and project teams preferred. Experience in program or project management focused on energy demand reduction, sustainability, or decarbonization preferred. Experience with earned value methodology and project financial tracking preferred Preferred certifications include Certified Energy Manager (CEM), Energy Management Professional (EMP), or other relevant certification. Salary Range: $110,000 - $160,000, dependent upon candidate experience. Benefits Our focus on people means we offer a generous benefits program to help you create a solid foundation for health and security throughout your career, including: Competitive compensation Performance bonuses 401(k) with matching contribution Employee Stock Ownership Plan Comprehensive health & well-being plans Financial wellness plans Work-life balance programs Want to know more? Visit our benefits page for all the details. Culture We understand that selecting a job is about more than the day-to-day tasks. It's important to feel like you belong and safe to grow and progress along your career path. You'll find that at Hanson. We have an inclusive, diverse workforce awaiting to connect with you and numerous opportunities to cultivate your career, including: Monthly educational webinars Leadership training Lunch & learn development sessions 24/7 access to thousands of skill-building courses Mentorship opportunities Award-winning internship program Employee recognition And so much more! AN EQUAL OPPORTUNITY EEO - EMPLOYER We do not accept unsolicited resumes from recruiters or agencies/staffing firms. Resumes are only accepted from recruiters and agency/staffing firms if a signed agreement is in place at the inception of the recruiting effort and authorized for a specified position.

OUC - The Reliable One is presently seeking a Project Engineer System Protection to join the Trans,Substation & Sys Protect division. At OUC, we don't just work - we're building a bright future of innovation and transformation for future generations. This is a hybrid position offering two remote workdays per week. Must be onsite Tuesdays and Thursdays. We are looking for a motivated Electrical Engineer with a strong background in power systems and protective relaying to support the design and reliability of substation protection and control systems. They will apply engineering expertise to support capital projects while ensuring compliance with NERC standards. OUC is an industry leader and the second largest municipal utility in Florida committed to innovation, sustainability, and our community. OUC's mission is to provide exceptional value to our customers and community by delivering sustainable and reliable services and solutions. Join a team of visionary Change Agents, Strategists, and Community Ambassadors who understand the vital role of diverse experiences in powering creativity and industry transformation. At OUC, each position contributes to the success and achievement of our goals. Click here to learn more about what we do. The ideal candidate will have: * Bachelor's Degree in Electrical Engineering from accredited college or university. * Minimum of four (4) years of experience in the electric utility industry * Must have strong understanding of AutoCAD * Knowledge of NERC Reliability Standards * Ability to interpret Protection & Control drawings * Strong project coordinator and task tracking abilities OUC offers a very competitive compensation and benefits package. Our Total Rewards package includes to cite a few: * Competitive compensation * Low-cost medical, dental, and vision benefits and paid life insurance premiums with no probationary period. * OUC's Hybrid Retirement Program includes a fully-funded cash balance account, defined contribution with employer matching along with a health reimbursement account * Generous paid vacation, holidays, and sick time * Paid parental leave * Educational Assistance Program, to include tuition reimbursement, paid memberships in professional associations, paid conference and training opportunities * Wellness incentives and free access to all on-site OUC fitness facilities * Access to family-oriented recreational areas * Paid Conference and Training Opportunities * Free downtown parking * Hybrid work schedule Click here to view our Benefits Summary. Salary Range: $94,210.39 - $117,763.28 annually - commensurate with experience LOCATION Pershing- 6003 Pershing Ave. Orlando, FL 32822 Please see below a complete Job description for this position. Job Purpose: Design protection and control relaying applications for substations with focus on Protection & Control Settings and SCADA Settings. Expected to develop or possess expertise in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). Provide design support to field personnel; develop and maintain sufficient level of expertise in use of CAD software for efficient production of engineering work. Primary Functions: * Ensure accomplishment of projects through effective planning, organizing, estimating, scheduling, and monitoring of work activities; * Generate plans and drawings for projects associated with protective relaying and retrofits; * Perform fault studies, relay setting calculations and relay loadability studies; ensure North American Electric Reliability Corporation (NERC) requirements are being met; * Review calculations and relay settings performed by consultants; * Create requisitions, track materials used in relay projects, and approve invoices associated with engineering work; * Coordinate capital projects associated with protective relaying and control devices; * Work with system protection supervisor to track work flow and resources; * Perform line-testing and provide feedback and recommendations regarding system protection operations and maintenance; * Perform other duties as assigned. Technical Requirements: * This work requires an understanding of power systems, transformers, protective relaying, and electrical engineering principles. Additionally, expected to develop or possess expertise in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). * Working knowledge of all, but not limited to the following: * Interpretation of relay documents and Protection & Control design drawings * Analysis and reporting of fault analysis and relay actions * Experience with power system modeling and relay coordination studies using Aspen One- * Liner software * Familiarity with Aspen Relay Database, SEL-5030 AcSELerator, EnerVista UR, * Software Applications (i.e. AutoCAD (design/drafting software), Setting (vendor) software, electrical engineer software (ASPEN) and fault analysis software; * NERC Reliability standards; * Institute of Electrical and Electronic Engineers (IEEE) standards; * Gantt Chart development; * Vendor instruction books; * Related industry, organizational and departmental policies, practices, and procedures; legal guidelines, ordinances, and laws; * Ability to use Microsoft Office Suite (Word, Excel, Outlook, etc.) and standard office equipment. Education/ Certification/ Years of Experience Requirements: * Bachelor's degree in Electrical Engineering from an ABET accredited college or university; * Minimum of four (4) years of engineering experience in the electric utility industry; * System protection engineering experience (preferred); * Special training to be completed within two (2) years of hire: * Vendor Training * System Protection * Protective Relay Application * Settings and Fault Analysis Software Training * CADD Proficiency * Leadership Training Working Conditions: This job may involve occasional exposure to some disagreeable elements (dust, heat, fumes, cold, noise, vibration, etc.) and accidents are improbable other than minor injuries. This job may involve occasionally with or around chemicals, insects and extreme heat (non-weather). This job may involve occasional exposure to blood borne pathogens and risk of electric shock. Physical Requirements: This job requires constant sitting, typing, reading, and writing. This job requires very frequent speaking and hearing. This job may require occasional driving of a company vehicle. OUC-The Reliable One is an Equal Opportunity Employer who is committed through responsible management policies to recruit, hire, promote, train, transfer, compensate, and administer all other personnel actions without regard to race, color, ethnicity, national origin, age, religion, disability, marital status, sex, sexual orientation, gender identity or expression, genetic information and any other factor prohibited under applicable federal, state, and local civil rights laws, rules, and regulations. EOE M/F/Vets/Disabled

Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm. We create and operate intelligent infrastructure and buildings that both respond to the climate emergency and contribute to balanced, sustainable and resilient development. Our 20,500 employees operate across over 100 countries, deploying their expertise to develop and deliver cutting-edge innovations and solutions for clients. Through the wide range of our activities, we are central to the collective organization of society and the living environment of citizens all over the world. Job Description Egis Consulting is seeking qualified professionals to provide contract case management services for a multi-year federal housing assistance program in the State of Indiana, with a preference for working out of the Indianapolis office. Case managers will oversee and provide assistance to the applicant for the entire application lifecycle, intake to program completion. Case Managers will work one-on-one with homeowners to gather proper financial documentation, determine program eligibility, enter data into program tracking software, and effectively communicate with homeowners and senior program staff to ensure efficient and timely processing of applications. Superb organization and communication skills are a must, and the Case Manager must be able to prioritize and multi-task to ensure compliance in a fast-paced environment with an accelerated turnaround timeline. Position Summary: The Florida Energy Saver Program is seeking a dynamic and experienced Energy Engineering Manager to lead and oversee the Energy Assessors Network, ensuring high-quality energy assessments and consistent implementation across the state. The ideal candidate will also be responsible for developing and overseeing statewide energy and utility modeling, driving strategic decisions for residential and commercial energy savings initiatives. This position requires a strong technical background in energy systems, modeling, and program management, along with the ability to lead teams, liaise with utility partners and stakeholders, and ensure compliance with program goals and standards. Key Responsibilities: Program Oversight & Leadership Manage and provide leadership to the Florida Energy Saver Program's Energy Assessors Network, ensuring quality control, consistency, and adherence to program protocols. Develop and implement training standards and performance benchmarks for energy assessors. Serve as the technical authority on energy efficiency measures, building systems, and emerging technologies. Energy & Utility Modeling Perform and oversee statewide energy modeling to estimate savings, inform policy, and support program evaluation. Develop and calibrate utility energy models to assess cost-effectiveness, forecast impacts, and support regulatory filings. Analyze energy consumption data and integrate findings into program planning and reporting. Provide expert-level support for modeling tools such as EnergyPlus, eQUEST, REM/Rate, OpenStudio, or similar platforms. Stakeholder Engagement & Reporting Collaborate with utility companies, regulatory bodies, and other stakeholders to align program goals and technical methodologies. Prepare and present detailed technical reports, data analyses, and strategic recommendations to internal and external partners. Support compliance reporting, audits, and performance evaluations for the program. Quality Assurance & Continuous Improvement Conduct audits of energy assessments to ensure data integrity and technical accuracy. Identify areas for program improvement and lead initiatives to enhance performance and participation. Maintain current knowledge of energy codes, utility incentive programs, and industry best practices. Qualifications Education & Experience Bachelor's degree in Energy Engineering, Mechanical Engineering, Building Science, or related field (Master's preferred). Minimum 5-7 years of experience in energy efficiency, energy modeling, or related technical program management. Experience leading or managing field teams, especially in residential or commercial energy assessment contexts. Proven experience with state-level energy modeling and utility-based analysis. Technical Skills Proficiency in modeling software (e.g., EnergyPlus, eQUEST, TRANE TRACE, REM/Rate, OpenStudio). Familiarity with Florida building codes, energy efficiency standards, and weatherization programs. Strong data analysis skills using Excel, Python, R, or similar platforms. Soft Skills Exceptional leadership, communication, and organizational skills. Ability to manage multiple projects and deadlines in a dynamic environment. Strong analytical mindset and attention to detail. Preferred Qualifications: Professional Engineer (PE) license or Certified Energy Manager (CEM) designation. Experience with utility Demand Side Management (DSM) programs. Knowledge of Florida-specific energy efficiency initiatives and regulatory landscape. Additional Information WHY JOIN EGIS? Opportunity to participate in a full range of employee benefits including, health, dental, vision, disability, and life insurance beginning the first day of the month following the first 30 days of continuous employment. 401(k) plan beginning the first day of the month following 90 days of continuous employment with 4% company match. Gracious Paid Time Off (PTO) package with increased accrual rates with tenure, along with 9 paid holidays. Competitive wages and potential bonus opportunities offered. Flexible schedules and potential hybrid schedules offered. Paid parental leave offered beginning the first day of the month following the first 30 days of continuous employment. Educational assistance / Tuition Reimbursement. An affirmative action participant EOE M/F/D/V/SO

Hughes Brothers Construction is now hiring! We are a heavy civil contractor specializing in large site infrastructure, underground utilities and roadway construction throughout Central Florida. HBC offers competitive pay, a robust benefits package and the chance to join a legacy built on hard work, trust and pride in every project! The Project Engineer is responsible for assisting with management of multiple site development and heavy civil construction projects throughout the Central Florida area. This position is responsible for the supervision and documentation of projects from contract award through final completion. Responsibilities: * Assists the Project Manager in all aspects of document control, cost control, quality, scheduling and safety. * Responsible for creating and maintaining the project documentation filing system. * Responsible for requesting, reviewing, submitting, tracking, and expediting project material submittals and shop drawings for review and approval. * Ensure approved submittals are distributed to appropriate parties in a timely manner and maintained in project management file. * Prepare and maintain accurate and up-to-date utility line locates. * Generate RFI's and track through submission, review, and distribution to appropriate personnel. * Assist with preparation, submittal, and tracking of all necessary permits/clearances required for the project. * Assist in maintaining accurate and up-to-date project schedules. * Attend meetings with Project Manager and generate meeting minutes as required. * Review daily timecards and monitor daily work activities for tracking of production and scheduling. * Manage the flow of information between the Owner, Engineer, Subcontractors, Vendors, and Project Team as appropriate. * Assist with preparation of monthly project pay applications and change order processing. * Attend final walk through and create/track punch list items through successful completion. * Coordinate the project close-out documentation process and ensure completion in an organized and timely manner. * Coordinate with Clients, Engineers, Subcontractors, and Vendors daily. * Assist the Project Manager with other functions as may be necessary for successful completion of projects. Desired Qualifications: * Exceptional oral and written communication skills. * Exceptional organizational and planning skills. * Computer proficient (programs include Microsoft Office, Microsoft Project, HCSS, AGTEK, Bluebeam). * Previous experience with Site Development and Heavy Civil Construction preferred (Earthwork, Utility Installation, Roadway Infrastructure). * B.S. degree in Civil Engineering or Construction Management a plus. Benefits: * Paid Holidays * Generous Paid Time Off (PTO) package * Medical, Dental, Vision, and Supplemental Insurances with employer contributions * 401K with employer match * Long-Term Incentives * Submit your application by clicking on the "apply" button for the position desired. Walk-in applications are accepted at our main office in Wildwood, Florida. Hughes Brothers Construction is an equal opportunity employer and a drug-free workplace.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $40/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Analyze and interpret electrical, electromechanical, and cable schematics for development and production Create, update, and publish clear and efficient assembly work instructions Identify and maintain required tooling for production Investigate technical issues and support manufacturing operators with timely solutions Collaborate with cross-functional teams to resolve manufacturing problems and implement corrective actions Contribute to lean manufacturing initiatives to enhance efficiency and reduce waste Provide design input to optimize manufacturability and equipment usage Partner with subject matter experts to implement process improvements Follow established manufacturing engineering processes and procedures Requirements: Bachelor's degree in a related discipline or equivalent experience Ability to interpret electrical schematics and diagrams High attention to detail, especially with electrical and electromechanical assemblies Proficient in Microsoft Office (Word, PowerPoint, Excel, Publisher) Strong interpersonal and communication skills Self-motivated with a proven ability to manage multiple tasks and deliver results Effective team player with excellent problem-solving abilities Familiarity with SAP (Qnotes, Routings, Bills of Material) or similar systems Understanding of design for manufacturing (DFM) principles Experience applying Lean manufacturing techniques and implementing process improvements Exposure to electrical engineering principles; familiarity with Zuken is a plus Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Job Description please check attachment Standard Shift (8:00AM - 5:00PM)

GARNEY CONSTRUCTION A Project Engineer position is available in Wildwood, FL. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Paid Holidays & Vacations CONTACT US If you are interested in this Project Engineer position in Wildwood, FL, then please APPLY NOW. For other opportunities available at Garney Construction, go to careers.garney.com. If you have questions about the position or would like more information, please contact Brooke Egan by email at ********************** Garney Construction and its subsidiaries are committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. Agency Disclaimer: All vendors must have a signed Garney Construction Agreement, authorized by the Executive Team, to receive payment for any placement. Verbal or written commitments made by anyone other than a member of the Executive Team will not be considered binding. Any unsolicited resumes sent to Garney Construction or submitted to employees outside of the Recruiting Team will be deemed the property of Garney Construction. In such cases, Garney Construction will not be obligated to pay any placement fees. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Orlando

Job Description Project Engineer - Central Florida Multifamily General Contractor Corporate Office & Project Sites | Greater Central Florida (Travel Required) A well-established Central Florida multifamily general contractor is seeking a detail-oriented and proactive Project Engineer to join our growing team. This position provides technical and administrative support to Project Managers and Superintendents on ground-up and renovation projects. Responsibilities include assisting with submittals, RFIs, procurement tracking, material verification, and project coordination. You'll help ensure schedules, budgets, and quality standards are met while gaining hands-on experience in project management and field operations. Our ground-up projects are located within 100 miles north and south of I-4, and our renovation projects can take place anywhere in the U.S. - so flexibility and a willingness to travel are key. If you're organized, analytical, and passionate about construction, this is an excellent opportunity to grow your career with a reputable and forward-thinking general contractor. Key Responsibilities Support project management and field supervision with documentation, tracking, and coordination Review and distribute submittals, shop drawings, and RFIs Verify materials and installations meet project specifications Assist in schedule updates, procurement logs, and change order documentation Coordinate with architects, engineers, and subcontractors to ensure information accuracy Track inspections, testing, and field reports to maintain quality standards Role Competencies Communication: Shares timely, relevant information across all project platforms Process Management: Organizes tasks systematically and efficiently Learns Quickly: Understands new systems, materials, and procedures with ease Time Management: Prioritizes effectively and meets deadlines Self-Sufficient: Researches, problem-solves, and seeks continuous improvement Strong Technical Knowledge: Manage schedules and coordinate with teams Cultural Competencies Accountable: Owns responsibilities and upholds high standards Adaptable: Coachable, self-aware, and flexible in changing project environments Self-Motivated: Takes initiative and pursues goals with energy and enthusiasm Hardworking: Dependable, results-driven, and team-focused Qualifications 2+ year degree in Construction Management, Engineering, or related field (or equivalent experience) 3+ years of experience with a general contractor preferred Knowledge of construction methods, materials, and processes Proficiency in Microsoft Office; experience with Procore and MS Project or Outbuild a plus Strong written and verbal communication skills Willing and able to travel to project sites outside Central Florida as required We offer a professional, team-oriented work environment with opportunities for advancement and involvement in meaningful multifamily projects across Central Florida and beyond. We offer an excellent benefits package including: Medical insurance Dental insurance Vision insurance 401(K) 401 (K) matching Life insurance Disability insurance Paid time off Company holidays Employee assistance program Health savings account Parental leave Referral program Tuition reimbursement To apply: Submit your résumé and a brief note describing your interest and experience to this posting.

Project Engineer - Microsoft 365 / Intune / Entra (Pro Services) We are seeking both Mid-Level / Senior Systems Engineers with strong expertise in Microsoft cloud technologies to design, deploy, migrate, and support modern workplace solutions for our clients. The ideal candidate will have deep experience with Microsoft 365, Intune, Entra ID (Azure AD), and hybrid Active Directory environments, ensuring secure, efficient, and scalable cloud implementations. Key Responsibilities Design, configure, and administer Microsoft 365 tenants, including Exchange Online, SharePoint, Teams, and related services. Implement and manage Intune (Endpoint Manager) for device management, compliance, app deployment, and endpoint protection. Plan, deploy, and maintain hybrid Active Directory and Entra ID integrations, including identity synchronization and federation. Perform email migrations from on-prem Exchange, Google Workspace, or other platforms to Microsoft 365 using tools like BitTitan or native migration services. Configure Conditional Access, MFA, RBAC, and security policies to enforce best practices and compliance standards. Troubleshoot issues related to directory sync (Azure AD Connect / Entra Connect), authentication, and M365 service availability. Develop automation scripts for administration and reporting using PowerShell or Microsoft Graph API. Collaborate with clients and internal teams to assess environments, create migration plans, and deliver technical documentation. Monitor and optimize tenant health, performance, and security posture using built-in analytics and reporting tools. Provide escalation support for complex issues related to Microsoft 365, Intune, or identity management. Skills & Qualifications Mid-Level Systems Engineer Experience: 3-5 years managing Microsoft 365, Azure AD/Entra ID, or Intune environments. Hands-on experience with hybrid AD, Exchange Online, and Intune administration. Strong understanding of Windows Server (2016-2022(5)) and Active Directory fundamentals. Familiarity with DNS, VPNs, and networking concepts in Microsoft environments. Basic to intermediate PowerShell scripting skills for automation and reporting. Experience with email and data migration tools such as BitTitan or Quest Migration Manager. Senior Systems Engineer Experience: 7+ years in systems engineering with a focus on Microsoft 365, Intune, and identity management. Proven expertise in Microsoft 365 tenant design, hybrid AD/Entra architecture, and device management at scale. Strong knowledge of identity and access management (IAM), including Conditional Access, SSO, and federation. Advanced PowerShell and automation capabilities, with experience using Graph API or Endpoint Manager templates. Ability to lead large-scale migrations, develop technical documentation, and mentor junior engineers. Familiarity with compliance and security frameworks (e.g., HIPAA, SOC 2, GDPR). Preferred Certifications Microsoft Certified: Azure Administrator Associate (AZ-104) Microsoft Certified: Modern Desktop Administrator (MD-102) Microsoft 365 Certified: Enterprise Administrator Expert Microsoft Certified: Security, Compliance, and Identity Fundamentals (SC-900) CompTIA Cloud+ or Security+ (preferred but not required) Soft Skills Excellent communication and client-facing skills. Strong problem-solving and analytical abilities. Ability to manage multiple projects and deliver results under deadlines. Leadership and mentorship experience for senior candidates. Benefits We offer comprehensive medical, dental, and vision insurance with competitive plan options We provide basic life insurance and long-term disability for all our employees 401k program with employer match to help you invest in your future Paid parental leave to support you and your family 22 paid days off (15 PTO + 7 National Holidays) Company issued laptop Company paid training as necessary Opportunities for professional development and growth Access to cutting-edge technology and resources

Description: About C Speed Based in Titusville, FL, C Speed's Engineering Services Group is a high-end supplier of contract engineering services and solutions. We are a Radar OEM specializing in mechanical and electrical engineering, Radar systems and custom software development, and Software Quality Assurance. We enjoy closely working with our customers on their next-gen products and contributing to the overall design & implementation along with seeing the final product delivered to market. We offer a fast-paced, dynamic workspace to our employees which often requires exposure to multiple projects across various disciplinary teams. Job Description We are looking for a motivated individual to fill the role of ‘Project Engineer' for our Titusville, FL facility. The Project Engineer role is a full-time position and will be an integral team member supporting various Program engineering activities by providing project management support. This individual will direct, coordinate, and functionally head planning, organization, control, integration, and completion of engineering projects of assigned responsibility. They will plan and formulate engineering efforts and organize project staff according to project/ program requirements. The Project Engineer will assign project tasking to specific phases or aspects of a project, such as technical studies, product design, preparation of specifications and technical plans, and product testing, in accordance with engineering disciplines of staff. Requirements: Job Responsibilities · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications. · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems. · Directs integration of technical activities and products. · Evaluates and approves design changes, specifications, and drawing releases. · Controls expenditures within limitations of project budget. · Prepares interim and completion project reports. · May have responsibility for technical direction of other lower-level project engineers or field engineers. · Implements government and commercial programs through a risk and oversight approach for all phases of project/program activities; identifies risks and problems, proposes solutions, and provides timely and accurate contract deliverables. · Responsible for the cost, schedule performance of assigned projects/programs. · Participates in the negotiation of contract and contract changes. · Coordinates the preparation of proposals, business plans, proposal work statements and specifications, operating budgets and financial terms/conditions of contract. · Acts as one of the primary customer contacts for program activities, leading review sessions with customers to discuss cost, schedule, and technical performance. · Develops new business or expands the product line with the customer. · Establishes milestones and monitors adherence to master plans and schedules, identifies program problems and obtains solutions, such as allocation of resources or changing contractual specifications. · Directs the work of employees assigned to the program from technical, manufacturing and administrative areas. · May require some travel · Other duties as assigned Required Qualifications · Bachelors of Science Degree in Engineering, other technical discipline or relevant work experience · 5+ years of relevant experience in Project Engineering/Management at an Engineering firm or as a Government Contractor · Experience managing and coordinating a team of administrators, engineers, and technicians · Project Management experience for a highly technical product OEM company · Experience with Radar/Sensor or other highly technical systems · Proven communication and presentation skills · Proficiency working with Microsoft Office, to include PowerPoint, Excel, Project and Word · Must be authorized to work in the United States · Ability to obtain & maintain a secret level clearance · A positive attitude with a flexible, can-do mentality · Self-starter and motivated to contribute to process improvements Clearance Qualifications · Must be able to obtain and maintain Security Clearance · Active Secrete Clearance or CV date within 5 years is desirable. Preferred Qualifications · Project Management Professional (PMP) Certification · Radar/Sensor product development, system engineering, and/or sustainment engineering experience · CAM Experience Compensation · Salary competitive, commensurate with experience · Comprehensive benefits package · 9-80 work schedule

About the Role and Team We create happiness." That's our motto at Walt Disney Parks and Resorts, and it permeates everything we do. At Disney, you'll help encourage that magic by enabling our company to push the limits and build the never-before-seen! Are you ready to join this team and make an impact? We are currently looking for a highly motivated Systems Engineer - Mechanical Analyst with a BS/MS and 1+ year work experience to join our team of Systems Engineers on the Modeling, Simulation, and Training Tools team at the Walt Disney Company. In this role, you will lead and contribute to technical projects focused on the simulation and analysis of mechanical systems for Walt Disney Imagineering, Ride and Show Engineering, Engineering Services, and Entertainment for Ride, Show, and Animatronic Systems. These services will include developing rigid multi-body dynamic models (MATLAB/Simulink/Simscape); data preparation and analysis (MATLAB); and working with a team of engineers leading small technical projects. This is a 24-month Project Hire role based in Lake Buena Vista, FL, reporting to the Director of Design and Engineering. What You Will Do * On any given day, as a Systems Engineer - Mechanical Analyst, you might: * Lead and contribute to technical projects focused on the simulation and analysis of animatronics and show systems. * Prepare models for rigid-body dynamic analyses (e.g. CAD preparation in SolidWorks defining system kinematics and dynamic properties). * Build and run rigid-body dynamic models for simulation (e.g. MATLAB/Simulink (Simscape Multibody). * Prepare reports, documentation, and presentation materials summarizing analysis results and communicating results to partners. * Collaborate with mechanical design teams, other analysts, and creative partners on the technical details of the simulations. * Work with our Walt Disney Imagineering (WDI) and Facilities and Operational Services (FOS) partners to communicate requirements and results from system simulations. * Prepare proposals for stakeholders including scope of work, budgets, and schedules. * Track and advise project teams and leadership on project schedule and budget trends. * Support tool development for automation of analysis processes through coding, testing, and validation Required Qualifications & Skills * Here's what you need to be successful at this job: * Strong physics and mathematics academic background. * Proven ability to lead small analysis or simulations projects working independently or overseeing a small team of supporting engineers. * Proficiency in CAD Software (SolidWorks highly preferred). * Experience in dynamic modeling and simulation software (MATLAB/Simulink Simscape Multibody highly preferred). * Experience with scripting and programming in software languages such as Python or MATLAB. * Strong interest in systems engineering and software (automation, coding, and debugging). * Familiarity with both software and mechanical version control systems (Git, PDM, Upchain or similar tools). Preferred Qualifications It would be great if you also have: * Experience with working on animatronic systems or other related work in the entertainment industry. * Familiarity with Agile software development practices, including scrum, sprint planning, retrospectives, etc. * Proven Professional Engineer License or equivalent. * Demonstrated understanding of the Software Development process. * Experience with Finite Element Analysis (Ansys or SolidWorks). Education * Bachelor's degree in Electrical engineering, computer science or other related field. * Preferred: Professional Engineering License in Electrical or Computer Engineering. * Preferred: Master's degree in electrical engineering, Computer Science or other related field. Additional Information Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** This position will remain open from 12/15/25 to 1/4/26. #dxfos #DXMedia #li-dm2 About Walt Disney World Resort: Since opening in 1971, Walt Disney World Resort has played an important role in many childhood and family memories. Today, hundreds of millions of guests from around the globe visit this magical place to enjoy a Disney vacation. Through a combination of creativity, innovation and technology, the resort immerses guests in classic Disney tales and new kinds of family entertainment. Drawing from a rich heritage of storytelling, Walt Disney World Resort cast members bring Disney magic to life through unmatched attention to detail and superior guest service. About The Walt Disney Company: The Walt Disney Company, together with its subsidiaries and affiliates, is a leading diversified international family entertainment and media enterprise that includes three core business segments: Disney Entertainment, ESPN, and Disney Experiences. From humble beginnings as a cartoon studio in the 1920s to its preeminent name in the entertainment industry today, Disney proudly continues its legacy of creating world-class stories and experiences for every member of the family. Disney's stories, characters and experiences reach consumers and guests from every corner of the globe. With operations in more than 40 countries, our employees and cast members work together to create entertainment experiences that are both universally and locally cherished. This position is with Walt Disney Parks and Resorts U.S., Inc., which is part of a business we call Walt Disney World Resort. Walt Disney Parks and Resorts U.S., Inc. is an equal opportunity employer. Applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender, gender identity, gender expression, national origin, ancestry, age, marital status, military or veteran status, medical condition, genetic information or disability, or any other basis prohibited by federal, state or local law. Disney champions a business environment where ideas and decisions from all people help us grow, innovate, create the best stories and be relevant in a constantly evolving world. Apply Now Apply Later Current Employees Apply via My Disney Career Explore Location

Job Description We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations We are looking for people that fit our values problem solvers; people that can innovate solutions to real-world problems intellectual curiosity and passion for engineering internally motivated; we do not micromanage highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements BSME +3 years of experience OR MSME from an Accredited University GPA not less than 3.3 at all degree levels US Citizenship required due to strict ITAR regulations Strong understanding of mechanical engineering fundamentals Interest in hands-on engineering work in one or more focus areas of Mainstream Prior experience in design, test, and/or analysis with an interest in learning more about each ANSYS experience with willingness to verify design through test Knowledge of testing equipment and setups is a plus CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. Job Posted by ApplicantPro

GARNEY CONSTRUCTION A Project Engineer position is available in Orlando, FL. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Paid Holidays & Vacations CONTACT US If you are interested in this Project Engineer position in Orlando, FL then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com. If you have questions about the position or would like more information, please contact Jody Roberts by email at *********************** Garney Construction and its subsidiaries committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Orlando