Mechanical engineer jobs in Wichita, KS

Mechanical Engineer - Generation Development & Construction - (DEV0002) JOB TITLE: Mechanical Engineer - Generation Development & ConstructionREQUISITION: DEV0002DEPARTMENT: Generation DevelopmentLOCATION: Topeka, KS / Kansas City, MO / Wichita, KSPAY RANGE: Engineer II - $66,300 - $82,900 Staff Engineer: $90,500 - $113,100 Sr Engineer: $91,600 - $122,100 Lead Engineer: $107,900 - $143,800 Principal Engineer: $112,500 - $150,000SummaryEvergy is committed to leading the Responsible Portfolio Transition. Evergy's 2024 Triennial Integrated Resource Plan (IRP) called for 3,600 MWs of new wind and solar and 2,445 MWs of new conventional generating assets over the next ten years. Seeking a technically strong and collaborative Mechanical Engineer to support the development, construction, and commissioning of conventional generation projects. Reporting to the Manager - Conventional Generation Engineering, the candidate has technical responsibility to support the development of conventional generation projects. The engineer will work closely with Project Managers, Owner's Engineer (OE), EPC Contractors, Major Equipment Supplier, and internal Transmission & Substation (T&S) teams to ensure safe, timely, cost-effective, and environmentally sound project delivery. The engineer will assist with projects that are complex, multi-million-dollar capital projects with multi-year timeframes that span diverse disciplines. The type of projects will include conventional generation including simple cycle combustion turbines, and combined cycle combustion turbines. This candidate will provide engineering support to the development, construction and commissioning of mechanical systems. Key Responsibilities:• Provide technical oversight to enforce contract requirements on EPC Contractors and Major Equipment Suppliers. • Coordinate with OE, EPC, Power Island Suppliers, and internal teams to ensure project success. • Promote safety and contribute to a positive team culture. • Support multi-disciplinary, multi-year capital projects with high complexity and value. • Evaluate mechanical system designs including piping layouts, rotating equipment, heat exchangers, and auxiliary systems. • Review and develop specifications for major mechanical equipment such as gas turbines (GT), steam turbines (ST), heat recovery steam generators (HRSG), pumps, and cooling systems. • Ensure proper integration of GT, ST, HRSG, and balance-of-plant (BOP) systems. • Advise on equipment layout and reliability improvements. • Participate in vendor evaluations and ensure technical compliance. • Witness FATs for critical mechanical components. • Monitor delivery schedules and inspect mechanical installations including piping, valves, and rotating equipment alignment. • Onsite lead for all mechanical engineering RFIs and oversight. Education and Experience Requirements:This position requires a minimum bachelor's degree in mechanical engineering with at least 4 years of engineering experience in mechanical design, construction, or commissioning for power generation or industrial projects. The applicant must be willing to work nights and weekends as needed. Chemical and Industrial Engineers will also be considered. Additional Skills, Knowledge, and Abilities:Knowledge of thermodynamics, fluid mechanics, and heat transfer. Familiarity with ASME codes and mechanical standards. Ability to interpret P&IDs, piping layouts, and equipment specifications. Experience with gas turbines, steam turbines, HRSGs, and BOP systems in combined cycle or simple cycle applications. The successful candidate must possess high initiative and strong interpersonal skills and exhibit good computer skills. Licenses or Certificates Required:Must have valid driver's license. Must have satisfactory work record including good attendance. EIT or PE is preferred Working Conditions:Must have the ability to perform the physical activities of the job. Requires extensive on-site plant work with some office work. Requires the ability to work outdoors and in an industrial plant environment including, but not limited to, exposure to ambient temperature extremes, dusty/moist environments, climbing ladders and stairways, working at heights on elevated structures and platforms, and working in cramped spaces occasionally which may require bending, stooping, and standing. Travel is expected to development sites at least 10% of the time up to 100% during peak construction and commissioning. Extensive in-state and out of state travel required. Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know to accomplish becoming the most innovative and reliable energy company, we need a team with a variety of backgrounds, perspectives and skills. So, our goal is to be a diverse workforce that is representative of the communities we serve. We are committed to celebrating diversity and building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. We know that the more diverse and inclusive we are, the better we will be. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer. Disclaimer: The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Work Locations: 1KC - Missouri HQ - Floor 18 One Kansas City Place 1200 Main St Kansas City 64105Job: EngineeringShift: Unposting Date: Jan 3, 2026

JOB TITLE: Mechanical Engineer - Generation Development & Construction DEPARTMENT: Generation Development PAY RANGE: Engineer II - $66,300 - $82,900 Staff Engineer: $90,500 - $113,100 Sr Engineer: $91,600 - $122,100 Lead Engineer: $107,900 - $143,800 Principal Engineer: $112,500 - $150,000 Summary Evergy is committed to leading the Responsible Portfolio Transition. Evergy's 2024 Triennial Integrated Resource Plan (IRP) called for 3,600 MWs of new wind and solar and 2,445 MWs of new conventional generating assets over the next ten years. Seeking a technically strong and collaborative Mechanical Engineer to support the development, construction, and commissioning of conventional generation projects. Reporting to the Manager - Conventional Generation Engineering, the candidate has technical responsibility to support the development of conventional generation projects. The engineer will work closely with Project Managers, Owner's Engineer (OE), EPC Contractors, Major Equipment Supplier, and internal Transmission & Substation (T&S) teams to ensure safe, timely, cost-effective, and environmentally sound project delivery. The engineer will assist with projects that are complex, multi-million-dollar capital projects with multi-year timeframes that span diverse disciplines. The type of projects will include conventional generation including simple cycle combustion turbines, and combined cycle combustion turbines. This candidate will provide engineering support to the development, construction and commissioning of mechanical systems. Key Responsibilities: * Provide technical oversight to enforce contract requirements on EPC Contractors and Major Equipment Suppliers. * Coordinate with OE, EPC, Power Island Suppliers, and internal teams to ensure project success. * Promote safety and contribute to a positive team culture. * Support multi-disciplinary, multi-year capital projects with high complexity and value. * Evaluate mechanical system designs including piping layouts, rotating equipment, heat exchangers, and auxiliary systems. * Review and develop specifications for major mechanical equipment such as gas turbines (GT), steam turbines (ST), heat recovery steam generators (HRSG), pumps, and cooling systems. * Ensure proper integration of GT, ST, HRSG, and balance-of-plant (BOP) systems. * Advise on equipment layout and reliability improvements. * Participate in vendor evaluations and ensure technical compliance. * Witness FATs for critical mechanical components. * Monitor delivery schedules and inspect mechanical installations including piping, valves, and rotating equipment alignment. * Onsite lead for all mechanical engineering RFIs and oversight. Education and Experience Requirements: This position requires a minimum bachelor's degree in mechanical engineering with at least 4 years of engineering experience in mechanical design, construction, or commissioning for power generation or industrial projects. The applicant must be willing to work nights and weekends as needed. Chemical and Industrial Engineers will also be considered. Additional Skills, Knowledge, and Abilities: Knowledge of thermodynamics, fluid mechanics, and heat transfer. Familiarity with ASME codes and mechanical standards. Ability to interpret P&IDs, piping layouts, and equipment specifications. Experience with gas turbines, steam turbines, HRSGs, and BOP systems in combined cycle or simple cycle applications. The successful candidate must possess high initiative and strong interpersonal skills and exhibit good computer skills. Licenses or Certificates Required: Must have valid driver's license. Must have satisfactory work record including good attendance. EIT or PE is preferred Working Conditions: Must have the ability to perform the physical activities of the job. Requires extensive on-site plant work with some office work. Requires the ability to work outdoors and in an industrial plant environment including, but not limited to, exposure to ambient temperature extremes, dusty/moist environments, climbing ladders and stairways, working at heights on elevated structures and platforms, and working in cramped spaces occasionally which may require bending, stooping, and standing. Travel is expected to development sites at least 10% of the time up to 100% during peak construction and commissioning. Extensive in-state and out of state travel required. Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know to accomplish becoming the most innovative and reliable energy company, we need a team with a variety of backgrounds, perspectives and skills. So, our goal is to be a diverse workforce that is representative of the communities we serve. We are committed to celebrating diversity and building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. We know that the more diverse and inclusive we are, the better we will be. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer.

When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? At Bombardier, we design, build and maintain the world's peak-performing aircraft for the world's most discerning people and businesses, governments and militaries. We have been successful in setting the highest standards by putting our people at the heart of it all, and defining excellence, together. Working at Bombardier means operating at the highest level. Every day, you are part of a team that delivers superior experiences and products, pushing the boundaries of what's possible in our industry and beyond. By prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms, because the best work happens when you are free to be yourself and share your unique expertise. Bombardier's Benefits Program With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: * Insurance plans (Dental, medical, life insurance, disability, and more) * Competitive base salary * Retirement savings plan * Employee Assistance Program * Tele Health Program What are your contributions to the team? * Prepare all necessary documents to support the interior and secondary structure modification of Bombardier aircraft such as detail, assembly and installation drawings, specification documents and substantiation reports. * Coordinate with outside suppliers, internal departments and regulatory agencies regarding the design, installation, integration, and certification of new interior components to support floorplan modifications. * Research specification for component selection. Coordinate with suppliers to ensure specifications are met. * Support statement of work creation and bids for new customer requests. * Assist service center personnel in investigating, troubleshooting, and resolution of build/modification and test issues and create deviation drawings as required. * Work in a team environment How to thrive in this role? * You will hold a Bachelor of Science Mechanical or Aerospace Engineering or equivalent with two (2) years relevant experience or will have a minimum of eight (8) years of practical mechanical design experience in aviation. * Working knowledge of electrical wiring diagrams and wire routing. * Working knowledge of integration of ECS systems, waste and potable water systems, and other commodities associated with interior installations. * You are proficient creating mechanical drawings using CATIA (required) and AutoCAD (additional) * You will have a working knowledge of applicable regulatory certification rules (FAA, EASA, TCCA). * You will be proficient with MS Office (MS Word, Excel, Power Point, Access) * You must be a self-starter and able to handle multiple initiatives effectively. * You must exhibit excellent written and interpersonal communication skills. * You should be an organized individual, able to work effectively with a variety of cross-functional individuals, departments and organizations with a general good attitude and disposition. * Effective communication of design intent, and design resolution are preferred. Now that you can see yourself in this role, apply and join the Bombardier Team! Bombardier is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws. Job Mechanical Design Engineer Primary Location Wichita, ADMN / MFG, Learjet Organization Learjet Inc Shift Employee Status Regular Requisition 9913 Mechanical Design Engineer Nearest Major Market: Wichita

Job Description Are you ready to take your career to the next level? At Professional Engineering Consultants (PEC), we are dedicated to providing innovative solutions and exceptional services across a variety of markets. We are looking for passionate and talented individuals to join our team and contribute to our mission of creating sustainable and impactful solutions for our clients and communities. At PEC, we pride ourselves on fostering a positive work culture that values the well-being of our employees. Our supportive environment encourages collaboration, respect, and professional growth. We offer a vibrant team atmosphere and comprehensive benefits packages. We are seeking a driven and enthusiastic individual to join our Mechanical Engineering team. This is a fantastic opportunity to make a significant impact and grow your career with us! Position Summary: The Design Engineer will be responsible for design on multiple projects, working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for preparing design deliverables for a variety of projects while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Performs engineering design, coordinates with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Performs tasks during construction administration including review of submittals, site investigations, and RFI response under the direction of the Project Engineer Performs design and takeoff computations by hand and by computer software Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards Organize project information and files according to corporate standard practices and workflows Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others Excellent oral, written, and interpersonal communication skills Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu TRANE TRACE 700 or equivalent HVAC Loads software Various online equipment selection software Experience with codes and regulations, interpreting plans, and design of discipline specific project components: Fire Protection Performance Specification Mechanical Equipment Layout and Room Sizing Plumbing System Design, Calculations, and Layout Domestic Water (Cold Water, Hot Water, and Hot Water Recirculation) Sanitary Waste and Vent Roof Drainage Natural Gas Plumbing Equipment Sizing Plumbing Fixture Selection and Specification HVAC System Design, Calculations and Layout HVAC Loads HVAC Equipment Sizing Airside HVAC Hydronic System Hydronic System Equipment Sizing Temperature Controls System Design and Layout Education and Experience: Bachelor's degree in an appropriate field of study from an ABET Accredited University is required License and Certification: Engineer in Training Certification preferred Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A PEC is an AA/EEO/Veteran/Disabled employer.

Job Description:Detail-oriented, reliable, creative team-player to lead field technical support for routine maintenance, turnaround (TAR), shutdown, outages, and project activities focused on fixed (static) equipment projects. Job Duties/Responsibilities:•Field technical support, construction oversight, inspection, and reporting at client sites and vendors•Produce engineering packages and bid documents to code and client specifications•Interface across disciplines to deliver integrated solutions•Perform calculations, develop repair drawings, and provide repair/replacement recommendations, specifications, and scope of work packages for construction•Lead Client and Contractor interface, attend meetings, and provide written reports•Provide technical support for field execution, including outage/turnaround projects•Assist in constructability planning, proposal, and estimate development Minimum Qualifications:•Education: Bachelor of Science in Mechanical Engineering•Experience: Min Yr = 8+•Licensure: P.E. Preferred•Technical Skills: Knowledge of ASME B31.3, B31.1, ASME VIII Div I&2 required Knowledge of API 510/570/650/653, AutoCAD, Revit, & Bluebeam preferred•Management: Experience mentoring and leading small teams required•Other Skills: Strong organizational, written, and verbal communication skills Professional Development Opportunities:•Leadership and management of field evaluations & calculations•Growth in leading technical teams as a subject matter expert or Project Manager• Advanced skills in multi-discipline technical and managerial issues•Advanced experience in equipment construction and maintenance•Advanced exposure to operating facilities•Obtain industry and skill specific certifications Individual field assignments typically each have their own unique requirements. Prior to deployment on any field assignment, you must be able to meet all client-specific site requirements. Should you be unable or unwilling to meet assignment-specific requirements, your continued employment would then be subject to the availability of other assignments whose requirements can be met. These unique requirements may include:•You must possess physical mobility (on the ground and at heights).•You may be required to pick up, lift, carry, and move up to 50 lbs.•You may be required to work at heights, climb ladders and stairways, and may occasionally work off platforms/scaffolding/ladders using the appropriate and required fall protection. •You must be able to work in all weather conditions (including heat, rain, cold, and wind) while wearing the appropriate PPE. This may include but not be limited to a hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves, and leather, steel-toed work boots. •You may be required to position yourself to work in confined spaces•You may be required to adhere to a client's random drug testing program prior to entering their site.•You may be required to meet a client's facial hair safety policy prior to entering their site. Brindley Engineering is an Equal Opportunity Employer and committed to hiring and retaining a diverse workforce. Employment decisions are made without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected characteristic as outlined by federal, state, or local laws. BE participates in E-Verify. For additional information regarding E-Verify, please go to ***************** We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Department: FACILITIES MAINTENANCE Pay: $27.50/hr, $57,200.00/annual Eligible for $1500 sign-on bonus after 60 days of employment. Work Schedule: Sedgwick County offers a comprehensive benefits package for full-time employees that includes health coverages, paid leave, regular compensation reviews, retirement plans, and professional development opportunities. For more detailed information, please visit our benefits page at SCBenefits. Performs diagnostic troubleshooting and the repair and maintenance of various mechanical systems and their associated electronic controls in county properties. These systems include but are not limited to: refrigeration equipment up to 390 ton machines, steam and hot water boiler systems up to 400 hp, cooling towers up to 875 ton capacity, pump motors up to 30 HP, low voltage control systems. Utilize a computer based Facility Management System (FMS) software program to monitor, diagnose and adjust the controlled systems under the software's authority. This job is a manual, physically demanding work done both indoors and in extreme temperatures of the outdoors as required. HVAC * Independently troubleshoot and repair HVAC/mechanical/control malfunctions in systems listed above. * Keep accurate records of refrigerant usage and refrigerant loss for each machine as required by the Clean Air Act and Montreal Protocol. * Provide required preventative maintenance and repair of systems listed above and on assorted mechanical equipment. * Perform water testing on open and closed loops for heating and cooling equipment. Adjust chemical per test results. * Design and layout primary wiring service for motors and equipment under County responsibility. * Perform preventative maintenance tasks to keep systems and devices working properly and safely. This will sometimes include working on "live" (energized) systems, circuits and devices with voltages of 480 VAC. * Perform preventative maintenance on assorted mechanical equipment. * Fabricate and install sheet metal ductwork in the properties as needed. * Diagnose, evaluate present condition and repair as necessary high and low pressure duct systems; including air handlers and related equipment. * Make needed modifications to gas supply lines as needed. (Not including welded lines.) Electrical * Install a variety of electrical fixtures, devices and equipment. * Repair existing electrical equipment and devices. * Repair or replace light fixtures including ballast, lamp holder and lamp replacement. * Test and repair special circuits such as GFCI, control circuits, switch legs and other electrical circuits. * Troubleshoot and repair breakers, terminals, relays, contactors and related equipment. * Perform preventative maintenance on assorted electrical equipment, security equipment and mechanical equipment. * Install conduit, electrical boxes, install and connect wiring. * Service and repair cameras and security monitors. Plumbing * Repair existing plumbing and gas systems and devices. * Replace, clean and repair flush valves, radiator valves, steam traps, faucets, water-temperature regulators and other devices. * Troubleshoot or maintain and repair sewer ejector pumps, sewer pits, floats and related equipment. * Cut, thread, solder, silver-solder, braze, weld, and hang pipe. * Knowledge of the basic methods, practices and procedures of a plumber's trade. Minimum Qualifications: High School diploma or equivalent. Five years of experience in HVAC, Electrical, plumbing, or a related field. Journeyman Mechanical, Plumbing or Electrical License / Refrigerant recovery certification, type I and type II for HVAC license only. Per Sedgwick County policy, this is a driving level position that requires a valid US driver's license without restrictions and current proof of automobile insurance. Preferred Qualifications: Five plus years of related experience in HVAC, electrical, and/or plumbing. Master Mechanical, Plumbing or Electrical license, City of Wichita Backflow Certification. Applicants have rights under Federal Employment Laws. Please find more information under the following link. Apply for a Job | Sedgwick County, Kansas

Design with Purpose. Lead with Integrity. Join Seat King as one of our on-site Product Design Engineer's and create seating solutions that keep operators comfortable, safe, and productive in turf, agriculture, and construction machines. About the Role: At Seat King, design doesn't stop at the drawing board. We take responsibility from concept through production - and beyond. This means you'll lead the creation of new seating systems and also support them after delivery, ensuring modifications, refinements, and troubleshooting meet evolving customer needs. This role is perfect for a design engineer who values end-to-end ownership, thrives in hands-on product development, and understands that great design includes sustaining and improving products already in use. What You'll Do: New Product Development → Lead the design and prototyping of seating products for turf, agriculture, and construction OEM customers. Lifecycle Ownership → Provide engineering support post-delivery for modifications, upgrades, and troubleshooting - ensuring long-term reliability and customer trust. Operator-Centered Design → Apply ergonomic and human factors principles to reduce fatigue, improve comfort, and enhance usability in rugged, high-vibration environments. Prototyping & Testing → Oversee prototypes and field evaluations to refine seat design for performance and manufacturability. Integrated Engineering → Collaborate with suppliers, OEM customers, and Seat King production teams to deliver solutions that balance innovation, manufacturability, and durability. What You'll Need: A mindset of continuous improvement and ownership - willing to both create new and sustain existing product lines. Bachelor's degree in Product Design or Engineering (with strong product development focus and/or ergonomic focus). 5+ years' product design experience, preferably in seating, interiors, or operator-focused equipment for OEM industries or parallel verticals. Demonstrated success in taking seating products from concept to production. Strong CAD skills (SolidWorks preferred) for creating seat assemblies, structures, and cushioning systems. Knowledge of ergonomics, anthropometrics, and adjustability features in seating. Familiarity with ride-quality and vibration isolation design. Experience collaborating across engineering, production, and customer teams. Where Engineering Meets Impact At Seat King, we don't just make seats. We design and deliver solutions that elevate OEM partnerships and improve operator lives. Every stitch, weld, and prototype reflects our purpose, integrity, and craftsmanship. Seat King, LLC EEO & Employment Eligibility Seat King, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state or local laws. Please Note to Recruiting Agencies: Seat King LLC does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms without a signed and active agreement in place. Any resumes submitted through our applicant tracking system or to our employees or affiliates without such an agreement will be considered property of Seat King LLC, and no fees will be paid in the event the candidate is hired. Please refrain from submitting candidates unless explicitly contracted to do so. Please note: Seat King LLC does not provide H1B Visa, O-1, CPT, OPT, or employment-based green card sponsorship for this position. About the Company: Our strength as an organization comes from our deep belief that business should create more than just economic capital, but social and spiritual capital as well. Seat King, LLC understands the importance of doing well and doing good - for our customers, our employees, our suppliers, and our community. Etched in our DNA, you will see an organization built on Character, Connection, Competence, and Commitment lived out through Serving People, Pursuing Excellence, Stewarding Resources, and Honoring God. Every undertaking is built around these principles, and our pursuit to live by them is never finished. For more information visit *************************************

Job Family for Posting: Engineering Job Type for Job Posting: Part Time Apply now * Apply Now * Start applying with LinkedIn Start Please wait... About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people - and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you're in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can't happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Co-op Program Overview We are committed to building a strong talent pipeline by investing in early career professionals. Our internship and co-op programs provide mentorship, training, hands-on experience, and growth opportunities that empower students to explore their career paths with confidence. Through competitive wages, networking events, social and volunteer activities, professional development workshops, and housing support, we strive to deliver one of the best internship experiences-designed to develop and inspire the talent of tomorrow. Co-ops will work part-time hours during the school year and will work full-time hours during the summer. Job Purpose The Global Driveline Engineering team is responsible for the design, validation, and integration of powertrain systems across CNH's vehicle platforms. Working closely with Vehicle Engineering and Product Validation colleagues, the team ensures that driveline components and systems deliver the durability, efficiency, and performance required for CNH's next generation of vehicles. As a Design/Application Engineer, you will be an integral part of the engineering office, supporting a new vehicle project through all key phases of development. This role offers the opportunity to gain hands-on experience with global engineering processes while contributing to critical design and validation work in the powertrain area. Key Responsibilities Your responsibilities may include: * Supporting new vehicle programs in the design, release, and validation of driveline and powertrain systems * Collaborating with Vehicle Engineering and Product Validation teams to ensure integration and system performance * Creating and reviewing designs, models, and technical documentation to support project milestones * Assisting with validation activities, including test planning, execution, and results analysis * Participating in cross-functional project discussions to identify solutions, resolve issues, and meet design objectives * Ensuring all work complies with engineering standards, safety regulations, and project requirements Preferred Qualifications Candidates must be pursuing (at minimum) a Bachelor's degree in Mechanical, Mechatronic Engineering, or a related field. Pay Transparency The annual salary for this role is USD $19.00 - $31.00 plus any applicable bonus (Actual salaries will vary and will be based on various factors, such as skill, experience and qualification for the role.) What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. Apply now * Apply Now * Start applying with LinkedIn Start Please wait... {{our Team.title}} {{our Team.cta}} {{slide?.cta}} {{slide.title}} × {{explore.title}} {{explore.description}} {{feed.title["#text"]}} {{feed.city["#text"]}}, {{feed.country["#text"]}} {{explore.cta}}

The Bradbury Co., Inc. is recognized around the world as the leader in quality roll forming solutions. We are a family-owned company located in Moundridge, KS. Our headquarters employs around 350 employees. For Summer 2026 - The Bradbury Internship Program for the Mechanical Engineering Department has opportunities for individuals to work in various engineering and technical disciplines. Perform engineering department duties, as an intern, involving the use of computer aided devices and design software to create new, modified, and/or improved designs of mechanical systems using established engineering practices with the guidance and mentorship of experienced engineers in order to develop and hone engineering skills in a learning environment. The time period must consist of no less than two months. ESSENTIAL FUNCTIONS Analyze product and equipment specifications and performance requirements to develop mechanical designs and drafting that can be produced by existing manufacturing methods Complete designs on time and within the estimated hours per the current engineering schedule and within corporate and engineering department guidelines Design with due regard to safety, economy, and ease of fabrication and operation Confer with engineering personnel and other department employees to clarify or resolve problems Provide necessary drawing maintenance as required to maintain good quality engineering prints Perform other duties as assigned SKILLS & ABILITIES REQUIRED/PREFERRED Ability to comprehend and apply advanced mathematics Able to respond to instructions furnished in written, oral, diagram, or schedule form Basic shop knowledge - manufacturing processes EDUCATION/TRAINING REQUIRED/PREFERRED Currently working towards a B.S. in ME, MET, or related field BENEFITS Paid Summer Holidays

When you join the Verus Aerospace team, you are more than a number - you are a valued part of our company family. Superior craftsmanship, employee pride and a shared commitment to continuous improvement are the foundation of our success. We have a strong reputation for professionalism and quality in the aerospace industry. Our company is committed to excellence and we recognize that the right people, offering their ideas and expertise, will enable us to continue our success. We seek team members who are passionate, adaptable, driven to achieve quality results, focused on continuous improvement, self-motivated and problem solvers. Position Summary Responsibilities include analyzing blueprints, specifications, and other documentation to prepare time, cost, and labor estimates for sheet metal and machined parts and components. Creates and maintains manufacturing cost estimates and proposals utilizing Routings and Bills of Materials for production of Aerospace components. Essential Duties and Responsibilities Evaluate all engineering data and information to assess producibility Review parts lists, drawings, and other data to determine manufacturing requirements including outside processing (heat treat, etc.) material, labor, and tooling and prepares itemized lists of those requirements Prepares estimates used for management purposes such as planning, organizing, and scheduling work, preparing bids, and determining cost effectiveness of make/buy analyses Makes recommendations to improve the manufacturing process, and when appropriate supports LEAN Manufacturing activities Analyze variances between estimated cost and actual cost to effectively evaluate the adequacy and accuracy of the utilized estimating parameters. Develop cost estimating tools utilizing Excel. Provide cost breakdowns and complete bid forms when requested by customers or business leadership Communicates with Customer on issues when required. Position Requirements Education and Experience: At least 3-5 years estimating experience in the aerospace industry Previous sheet metal forming and machining experience with 5 axis machines a plus Associates Degree or equivalent required or relevant experience (Engineering and applicable certifications preferred) Knowledge, Skills and Abilities: Ability to read, analyze and interpret documents such as drawings, blueprints, production schedules, contractual agreements, Requests for Quotation or Requests for Proposal, as well as various customer documents relating to the same Ability to write reports and business correspondence, both internal and external Ability to effectively communicate with individuals or groups of customers or employees Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations Ability to define problems, collect data, establish facts, and draw valid conclusions Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables Proficiency in the use of MS Office including Word, Excel, Outlook required Proficient in Catia Pay Transparency The salary information is a general guideline only. A wide range of factors are considered when extending an offer, such as job-related knowledge and skills, qualifications, education/training, key skills as well as market and business considerations. Other forms of pay (e.g., bonus or long term incentive) may be provided as part of the compensation package, in addition to a full range of medical, financial, and other benefits, dependent on the position offered. California pay range$60,000-$80,000 USD Equal Employment Opportunity Verus Aerospace is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, gender, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state or federal law. This policy applies with regard to all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits and termination. A notice describing Federal equal employment law is available here. Reasonable Accommodations Verus Aerospace is committed to offering reasonable accommodations to qualified job applicants with disabilities. If you need assistance or an accommodation due to a disability, please click here to contact us and let us know the nature of your request and contact information. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Transparency In Coverage (TIC) information This is a link that will take you to Anthem's website for access to Verus' Machine-Readable Files per the Consolidated Appropriations Act, 2021 Transparency in Coverage requirement to provide Machine-Readable Files on the health plan (effective July 1, 2022). ****************************************************** ITAR Requirements To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15). E-Verify This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. E-Verify Works for Everyone For more information on E-Verify, or if you believe that your employer has violated its E-Verify responsibilities, please contact DHS. ************ dhs.gov/e-verify I certify that I have made true, correct, and complete answers and statements on my employment application, any supplements to it and in any interview in the knowledge that they will be relied upon in considering my application for employment. I understand that any false or misleading information or omission may disqualify me from further consideration for employment and may lead to my dismissal from employment or revocation of an offer of employment, if discovered at a later date. I also understand that if I am hired, I will be required to provide proof of identity and legal authorization to work in the United States and that federal immigration laws require the completion of an I-9 Form in this regard. This Company does not tolerate unlawful discrimination in its employment practices. No question on this application is used for the purpose of limiting or excluding an applicant from consideration for employment on the basis of his or her race, color, religion, national origin, genetic information, gender, gender identification, gender expression, marital status or civil partnership/union status, sexual orientation, cancer related condition, medical condition, citizenship, age, physical or mental disability (actual or perceived), pregnancy disability, or family leave status, pregnancy, breastfeeding needs, reproductive health decision-making, organ or bone marrow donor status, or military or veteran's status, or any other protected status under applicable federal, state, or local law. This company likewise does not tolerate harassment based on sex, race, color, religion, national origin, genetic information, citizenship, age, disability, or any other protected status. Harassment of our employees is strictly prohibited, whether it is committed by a manager, coworker, subordinate, or non-employee (such as a vendor or customer). The Company takes all complaints of harassment seriously and all complaints will be investigated promptly and thoroughly. I hereby understand and acknowledge that any employment relationship with this Company is of an “at will” nature, which means that my employment may be terminated by me or the company at any time for any reason or no reason, and with or without notice. It is further understood that this “at will” employment relationship cannot be changed except in writing by an authorized executive of this Company. If hired, I agree to abide by all of the Company's rules, policies, and procedures. I understand that the Company and all plan administrators shall have the maximum discretion permitted by law to administer, interpret, modify, discontinue, enhance, or otherwise change all policies, procedures, rules, benefits, or other terms or conditions of employment. I understand that in addition to this application, the employment process may, for certain positions, include any or all of the following procedures: testing - aptitude, personality and/or skill, multiple interviews, post-offer thorough background checks and drug screening test. Immigration Compliance Plan The Company policies include a commitment to non-discrimination based on race, national origin and immigration status. Pursuant to the Immigration and Nationality Act (INA), which protects work authorized individuals from employment discrimination on the basis of citizenship status or national origin, employment decisions will not be made on the basis of a person's national origin, race or immigration status except to the extent necessary to comply with the International Traffic in Arms Regulations (ITAR). In those situations, the Company will need to obtain information necessary to comply with the requirements of the International Traffic in Arms Regulations (ITAR). This will include collection of documentation to establish one of three categories of citizenship/ immigration status: (1) U.S. Citizenship; (2) Permanent Residency (Green Card) and (3) Asylum or Refugee Status (formally recognized or assigned such status by the U.S. Immigration and Customs Enforcement). If an applicant or employee does not meet the category applicable to their anticipated work for the Company, the Company cannot hire such applicant. In order to ensure ITAR compliance, all applicants and employees of the Company will have their immigration status checked through a system called “E-Verify.” If the findings on the E-Verify search are not accurate, please contact Human Resources and obtain copies of all documents related to your work status. Employees who are not authorized to work in the United States cannot be employed at the Company.

Job Description A CNC Machine Tool Application Engineer contributes to the success of Hartwig by working hand-in-hand with our Sales team to provide support and be a technical resource to ensure customer satisfaction. The customers we serve are in a variety of industries and rely on the Hartwig team to provide the best manufacturing solutions and support the machine tool industry. This full-time position is based in the Wichita, KS area. The main responsibilities include: Evaluating manufacturing processes and recommending industry-leading solutions Developing and testing alternative processing methods Performing time studies for process improvement recommendations Overseeing machine installations Conducting research and assisting in presenting proposals to customers Performing on-site programming and machine operation training for customers Facilitating customer demonstrations by setting up and programming machine tools Required Skills Individuals who ideally fit this role should meet the following qualifications: Two-year degree in manufacturing engineering - preferred Experience in machining process development, project management and CNC programming preferred Okuma machine programming experience - preferred Ability to demonstrate knowledge and application of machine tool products, options and functions Strong mechanical and technical aptitude Excellent interpersonal skills, such as collaboration, listening, respect and work ethic, which lead to lasting and trusting relationships with team members and customers Ability to work collaboratively with sales team to provide customer solutions The Organization, The Team and Our Benefits Hartwig's team of over 200 professionals throughout the U.S. is dedicated to helping manufacturers control and power the growth of their business. To achieve this, team members are given the tools and training for success. In addition to a comprehensive first year training program and on-going professional development, Hartwig provides a full benefit package including health, dental, vision, life and disability insurances. Compensation is also a key element in your decision to join the Hartwig team. Our 401k program has a match and team members are bonus eligible. As an Applications Engineer at Hartwig, you will also be provided with a laptop and cellphone. With over 60 team members who have been with us 10 years or longer and over 12,000 installations since our founding in 1960, Hartwig has gained a reputation for superior service, integrity and support. We would be honored to have you consider joining our team. Hartwig, Inc., including all operating subsidiaries, is an Equal Opportunity Employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class.

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

Job DescriptionITAR regulations require applicant must be U.S. Citizen or legal permanent resident. Aerospace Systems & Components, Inc. (ASC) designs, develops, and manufactures various fluid control components, including butterfly valves, gate valves, solenoid valves, check valves, pressure and vacuum regulators, and other miscellaneous items. ASC was founded in Wichita more than 55 years ago and now provides product internationally to most of the major aviation manufacturers in the commercial and military markets. ASC has been steadily growing by offering new and innovative product to meet the demand of the latest aviation technologies. ASC has an immediate opportunity for a Project Engineer to design and develop new products and support any applicable sustaining of current designs as required. Job Title: Project Engineer Reports to: Engineering Manager Shift: Full Time - First Shift Job Role The Project Engineer is responsible for the design activities throughout the product development phase. This includes interpreting and understanding customer requirements, conceptualizing design solutions, modeling and drafting engineering drawings, generating design analysis/substantiation reports, and to build and support testing of new products. Job Tasks Design and development of new products Stress and fatigue analysis of new or sustaining products. Writing or checking of product development test plans. Oversight of product development tests. Development and oversight of product failure analysis evaluations. Interaction with customers and suppliers as required. Education/Skill Requirements BS in Mechanical Engineering, Aerospace Engineering or related field. Excellent mechanical aptitude and hands on ability. Working knowledge of personal computers and associated Microsoft Office software. 2D/3D CAD experience. Ability to handle multiple tasks. Ability to work effectively in a team. Good written and verbal communication skills. Self-starter and self-directed in daily activities. Additional Desired Skills Autodesk Inventor experience Aircraft pneumatic valve design experience CFD software experience FEA and Damage Tolerance software experience (AFGRrow or NASGRO) highly desired Matlab/Simulink experience TKSolver experience To apply, submit resume in .PDF format at ************************

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Commercial Aircraft is looking for a Design Engineer to join our Repair Solutions department based in Wichita, Kansas. Job Summary: As a Design Engineer you will support the airline in-service fleet on repairs of aircraft structure and is responsible for the creation of quality repair solutions in a timely manner from a Design point of view. Duties include performing design efforts for both metallic and non-metallic parts while working in close collaboration with static stress and fatigue colleagues to provide repair solutions. Methods include the use of multiple applications to research aircraft configurations and develop efficient repair solutions to satisfy airworthiness requirements and customers (Airlines/MROs). Meet the team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your working environment: Located on the Wichita State University (WSU) innovation campus is Airbus' first dedicated engineering facility outside of Europe. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: To be a supportive team player within the In-Service Daily Repair and/or Major Repair teams. Learn and support simple to routine repair tasks. Review and interpret damage reports of aircraft structures from the Maintenance Repair Organization and develop quality repair solutions with little support. Create or modify technical documents such as: Technical Communications, Technical Dispositions, Repair Instructions, Repair Drawings etc. within various Airbus computer based applications with high quality and efficiency. Understand the priorities of assignments and how this affects workflow. Interface repair requirements with customers and suppliers with a professional attitude. Liaise with Static Stress, F&DT and other appropriate Airbus departments to come up with optimum design solutions for the airline customer. Assists with preparation of various documents using AIRBUS computer based toolsets (SAP, AirDoc, etc.). Together with other Repair Engineers, be a member of an integrated engineering team, ensuring its strategy, policy and direction is maintained. Provide responses to simple to routine repair queries by giving guidance as required within Airbus Operations and Customer Services in a clear and concise manner. Ensure all tasks and activities are correctly planned, monitored and executed to achieve customer time scales. Identify and support local improvement initiatives to increase team efficiency through process, methods and tools improvements. Your boarding pass: Bachelor of Science (BS) Degree in Engineering (Aero, Civil, Mechanical) with a strong curriculum emphasis on structural design and analysis and mechanics of materials is required. 6+ years total design experience in airframe design and repair projects. Experience in metallic and/or composite airframe structural repair. Candidates should be comfortable working for extended periods of time using computers and in an office environment. Ability to interpret and follow verbal and written instructions. Ability to read, analyze, and interpret technical procedures. Ability to read and interpret engineering drawings and bill of material systems. Ability to write reports and business correspondence. Dependable, self-motivated and accessible. Knowledge of maintenance repair shop practices, equipment and capabilities. Authorized to Work in the US Physical Requirements: Onsite or remote: Onsite 100% Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: able to speak in conversations and meetings, deliver information and participate in communications. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. Sitting: able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Standing: able to stand for discussions in offices or on the production floor. Travel: able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Administration / Documentation ------ ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Job DescriptionPosition Title: Design/Manufacturing Engineer (2026 Part-Time Spring Semester Internship) Reports to: Engineering Manager Employment Type: Hourly Hours: 20-30 hours per week Compensation: $18/hour Application Deadline: 12/19/2025 Position Summary Part-time internships are 20-30 hours per week during academic semesters with the opportunity for full time employment during the summer. Part-time interns will work in person at our Norwich, KS facility. This position will work within our pattern shop, foundry, and machine shop learning and assisting in all engineering and production support tasks. Primary Responsibilities Assist in developing manufacturing processes for new products Design and produce foundry tooling and finishing work holding components Program/Setup CNC machining equipment (lathes, 3 & 4 axis mills, 5 axis mill-turns) Work closely with engineering and production personnel to investigate and solve technical problems Assist with and lead process improvements for production teams Develop setup and work instructions Research and implement new tools and manufacturing processes Education/Experience: Pursuing a Bachelor of Science degree in one of the following: Manufacturing Engineer Mechanical Engineering Manufacturing Engineering Technology Robotics/Mechatronics Engineering Industrial Engineering Engineering Technology Other related fields Qualifications Applicants must be authorized to work lawfully in the U.S. at the time of making application, and visa sponsorship is not available for this position, including for F-1 students and J-1 exchange visitors who will need employment sponsorship. Candidates must be able to work onsite for the entirety of the internship program unless otherwise approved by the supervisor. A basic knowledge of manufacturing, industrial, or mechanical engineering principles 3D CAD education or experience (SolidWorks preferred) Experience with Mastercam Understanding of CNC machining and programming Strong work ethic, communication, problem solving, and organizational skills Work Environment / Safety Requirements Must adhere to all safety rules and wear required PPE Work may involve exposure to noise and dust in a non-climate controlled environment. Powered by JazzHR Nh2ILnRFsf

**Best People + Right Culture. These are the driving forces behind JE Dunn's success.** **By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years.** **Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection.** **Role Summary** The Project Engineer 1 will complete and support construction and field execution responsibilities for construction projects utilizing construction fundamentals and company best practice standards, processes, resources and tools. This position will be responsible for implementing and carrying out many facets of the construction process such as general construction management, punch lists and executing self-perform work, in order to understand the building process and how JE Dunn executes projects. All activities will be performed in support of the strategy, vision and values of JE Dunn. + Autonomy and Decision Making: Makes decisions on assigned area of responsibility, provides recommendations and refers exceptions to supervisor, as needed. + Career Path: Project Engineer 2 **Key Role Responsibilities - Core** _PROJECT ENGINEERING FAMILY - CORE_ - Learns and actively participates in all aspects of the company's safety and quality plans and culture by demonstrating commitment to an injury-free environment through individual actions and mentoring others. - Participates with project QA/QC planning to ensure quality for assigned tasks. - Learns and participates in the estimating and change management process and tools, including quantity take-off and review of subcontractor proposals. - Works on site with the project team to support a variety of tasks such as monitoring crew size, self-perform hours, materials, quantity and equipment. - Participates in activities such as punch lists, city inspections, safety reviews, quality reviews and preparation of the necessary documentation. - Posts drawings and specifications with most recent information. - Organizes and participates in various project meetings. Prepares and disseminates required documentation as appropriate. - Participates and prepares a variety of reports including project daily reports, weekly progress reports, unit reporting, percentage complete, daily manpower, production schedules, equipment tracking, etc., in order to support the project. - Performs periodic job site observations with project leadership. - Creates procurement logs based on the project schedule and specification requirements. Tracks shop drawings and follows up with deliveries as directed by the project team. - Provides progress updates and reports back to the project team to support the scheduling process. - Supports the close out of projects, including but not limited to the punch list, operations and maintenance manuals, as-built drawings, etc. - Utilizes company best practice standards and fundamentals for building and construction techniques. - Builds relationships and develops communication and interpersonal skills with tradespeople and project team members such as foreman, journeymen, superintendents, subcontractors, etc. - Develops an understanding about the various functions and support roles across the company and how each contributes to the success of a project. - Collaborates and demonstrates teamwork in project setting. - Learns and incorporates Lean practices into regular activities. - Learns about best practices for identifying, developing and integrating self-perform opportunities into the project. **Key Role Responsibilities - Additional Core** N/A **Knowledge, Skills & Abilities** + Ability to perform work accurately and completely, and in a timely manner + Communication skills, verbal and written + Proficiency in MS Office + Knowledge of organizational structure and available resources + Knowledge of Lean process and philosophy + Knowledge of required construction technology + Ability to apply fundamentals of the means and methods of construction management + Knowledge of self-perform and labor productivity + Ability to assess and optimize project productivity + Knowledge of specific trades and scopes of work + Ability to build relationships and collaborate within a team, internally and externally **Education** + Bachelor's degree in construction management, engineering or related field + In lieu of the above requirements, equivalent relevant experience will be considered. **Experience** + Entry level construction experience **Working Environment** + Must be able to lift up to 50 pounds + May require periods of travel and/or relocation + Must be willing to work non-traditional hours to meet project needs + May be exposed to extreme conditions (hot or cold) + Frequent activity: Standing, Walking, Climbing, Bending, Reaching above Shoulder, Pushing, Pulling + Occasional activity: Sitting, Viewing Computer Screen **Benefits Information** The benefits package aligned to this position is Professional Non-Union. Please click the link below for more details. Click here for benefits details. (************************************************************************************ This role is expected to accept applications for at least three business days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. _JE Dunn Construction is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. JE Dunn Construction is a background screening, drug-free workplace._ **_JE Dunn provides reasonable accommodations to qualified individuals with disabilities. If you would like to request a reasonable accommodation in order to apply for a job, please submit your request to_** **_accommodations@jedunn.com_** _JE Dunn Construction Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Please, no phone calls or emails._ **Why People Work Here** At JE Dunn we offer our employees an inspired place to enrich their life and the lives of those around them **Building on our rich history,** our employee **owners are shaping the future** of JE Dunn. In our team-focused environment **we do life together** and are generously **rewarded for our efforts** **About JE Dunn** For more information on who we are, clickhere. (*********************************** **EEO NOTICES** Know Your Rights: Workplace Discrimination is Illegal (*********************************************************************************************** California Privacy Policy **E-Verify** JE Dunn participates in the Electronic Employment Eligibility Verification Program. E-Verify Participation (English and Spanish) (******************************************************************************************** Right to Work (English) Right to Work (Spanish) (***************************************************************************************************************************** **Nearest Major Market:** Wichita

Job Description:Detail-oriented, reliable, creative team-player to lead field technical support for routine maintenance, turnaround (TAR), shutdown, outages, and project activities focused on fixed (static) equipment projects. Job Duties/Responsibilities:•Field technical support, construction oversight, inspection, and reporting at client sites and vendors•Produce engineering packages and bid documents to code and client specifications•Interface across disciplines to deliver integrated solutions•Perform calculations, develop repair drawings, and provide repair/replacement recommendations, specifications, and scope of work packages for construction•Lead Client and Contractor interface, attend meetings, and provide written reports•Provide technical support for field execution, including outage/turnaround projects•Assist in constructability planning, proposal, and estimate development Minimum Qualifications:•Education: Bachelor of Science in Mechanical Engineering•Experience: Min Yr = 8+•Licensure: P.E. Preferred•Technical Skills: Knowledge of ASME B31.3, B31.1, ASME VIII Div I&2 required Knowledge of API 510/570/650/653, AutoCAD, Revit, & Bluebeam preferred•Management: Experience mentoring and leading small teams required•Other Skills: Strong organizational, written, and verbal communication skills Professional Development Opportunities:•Leadership and management of field evaluations & calculations•Growth in leading technical teams as a subject matter expert or Project Manager• Advanced skills in multi-discipline technical and managerial issues•Advanced experience in equipment construction and maintenance•Advanced exposure to operating facilities•Obtain industry and skill specific certifications Individual field assignments typically each have their own unique requirements. Prior to deployment on any field assignment, you must be able to meet all client-specific site requirements. Should you be unable or unwilling to meet assignment-specific requirements, your continued employment would then be subject to the availability of other assignments whose requirements can be met. These unique requirements may include:•You must possess physical mobility (on the ground and at heights).•You may be required to pick up, lift, carry, and move up to 50 lbs.•You may be required to work at heights, climb ladders and stairways, and may occasionally work off platforms/scaffolding/ladders using the appropriate and required fall protection. •You must be able to work in all weather conditions (including heat, rain, cold, and wind) while wearing the appropriate PPE. This may include but not be limited to a hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves, and leather, steel-toed work boots. •You may be required to position yourself to work in confined spaces•You may be required to adhere to a client's random drug testing program prior to entering their site.•You may be required to meet a client's facial hair safety policy prior to entering their site. Brindley Engineering is an Equal Opportunity Employer and committed to hiring and retaining a diverse workforce. Employment decisions are made without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected characteristic as outlined by federal, state, or local laws. BE participates in E-Verify. For additional information regarding E-Verify, please go to *****************

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Commercial Aircraft is looking for a Design Engineer to join our Repair Solutions department based in Wichita, Kansas. Job Summary: As a Design Engineer you will support the airline in-service fleet on repairs of aircraft structure and is responsible for the creation of quality repair solutions in a timely manner from a Design point of view. Duties include performing design efforts for both metallic and non-metallic parts while working in close collaboration with static stress and fatigue colleagues to provide repair solutions. Methods include the use of multiple applications to research aircraft configurations and develop efficient repair solutions to satisfy airworthiness requirements and customers (Airlines/MROs). Meet the team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your working environment: Located on the Wichita State University (WSU) innovation campus is Airbus' first dedicated engineering facility outside of Europe. How we care for you: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: * To be a supportive team player within the In-Service Daily Repair and/or Major Repair teams. * Learn and support simple to routine repair tasks. * Review and interpret damage reports of aircraft structures from the Maintenance Repair Organization and develop quality * repair solutions with little support. * Create or modify technical documents such as: Technical Communications, Technical Dispositions, Repair Instructions, * Repair Drawings etc. within various Airbus computer based applications with high quality and efficiency. * Understand the priorities of assignments and how this affects workflow. * Interface repair requirements with customers and suppliers with a professional attitude. * Liaise with Static Stress, F&DT and other appropriate Airbus departments to come up with optimum design solutions for the airline customer. * Assists with preparation of various documents using AIRBUS computer based toolsets (SAP, AirDoc, etc.). * Together with other Repair Engineers, be a member of an integrated engineering team, ensuring its strategy, policy and direction is maintained. * Provide responses to simple to routine repair queries by giving guidance as required within Airbus Operations and Customer Services in a clear and concise manner. * Ensure all tasks and activities are correctly planned, monitored and executed to achieve customer time scales. * Identify and support local improvement initiatives to increase team efficiency through process, methods and tools improvements. Your boarding pass: * Bachelor of Science (BS) Degree in Engineering (Aero, Civil, Mechanical) with a strong curriculum emphasis on structural design and analysis and mechanics of materials is required. * 6+ years total design experience in airframe design and repair projects. * Experience in metallic and/or composite airframe structural repair. * Candidates should be comfortable working for extended periods of time using computers and in an office environment. * Ability to interpret and follow verbal and written instructions. * Ability to read, analyze, and interpret technical procedures. * Ability to read and interpret engineering drawings and bill of material systems. * Ability to write reports and business correspondence. * Dependable, self-motivated and accessible. * Knowledge of maintenance repair shop practices, equipment and capabilities. * Authorized to Work in the US Physical Requirements: * Onsite or remote: Onsite 100% * Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. * Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. * Speaking: able to speak in conversations and meetings, deliver information and participate in communications. * Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. * Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. * Sitting: able to sit for long periods of time in meetings, working on the computer. * Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. * Standing: able to stand for discussions in offices or on the production floor. * Travel: able to travel independently and at short notice. * Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. * Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Administration / Documentation * ----- * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Reports to: Engineering Manager Employment Type: Hourly Hours: 40 hours per week Compensation: $18/hour Application Deadline: 2/20/2026 Position Summary Summer internships are 40 hours per week, typically lasting from late May to early August. Interns will work in person at our Norwich, KS facility. This position will work within our pattern shop, foundry, and machine shop learning and assisting in all engineering and production support tasks. Primary Responsibilities Assist in developing manufacturing processes for new products Design and produce foundry tooling and finishing work holding components Program/Setup CNC machining equipment (lathes, 3 & 4 axis mills, 5 axis mill-turns) Work closely with engineering and production personnel to investigate and solve technical problems Assist with and lead process improvements for production teams Develop setup and work instructions Research and implement new tools and manufacturing processes Education/Experience: Pursuing a Bachelor of Science degree in one of the following: Manufacturing Engineer Mechanical Engineering Manufacturing Engineering Technology Robotics/Mechatronics Engineering Industrial Engineering Engineering Technology Other related fields Qualifications Applicants must be authorized to work lawfully in the U.S. at the time of making application, and visa sponsorship is not available for this position, including for F-1 students and J-1 exchange visitors who will need employment sponsorship Candidates must be able to work onsite for the entirety of the internship program unless otherwise approved by the supervisor A basic knowledge of manufacturing, industrial, or mechanical engineering principles 3D CAD education or experience (SolidWorks preferred) Experience with Mastercam Understanding of CNC machining and programming Strong work ethic, communication, problem solving, and organizational skills Work Environment / Safety Requirements Must adhere to all safety rules and wear required PPE Work may involve exposure to noise and dust in a non-climate controlled environment. Powered by JazzHR oAcVo5SeOm