Mechanical engineering internship jobs in Charlotte, NC - 204 jobs

Title: Mechanical Manufacturing Engineer Hours: AM Shift *This is NOT an entry level position, please do not apply if you do not have 3-5 years of working experience, you will not be considered at this time* If your application was recently rejected, please do not re-apply* Job Summary: The Manufacturing Engineer's primary function is to bridge the gap between Engineering and Operations and provide support to improve the overall efficiency and quality of the product and production cycle. Key Responsibilities: Support the mechanical (and basic electrical) assembly process by interpreting approved design models/drawings and communicating the solutions to the shop floor. Improve the overall efficiency of the plant assembly process, including fabrication and painting. Work with lead hands in production and develop engineering solutions for production issues and design errors. Assist in creating and implementing engineering change requests (ECR). Assist in improving product quality and consistency through refinements and improvements in the assembly process. Work with the Electrical and Mechanical assembly teams to ensure the build process's accuracy and support the Project Managers to ensure budget and timelines are protected. Support root-cause analysis and develop corrective measures with QA for issues that extend through the manufacturing process. Work with Engineering and Operations to develop methods, tools, jigs, etc., for improving the assembly Qualifications & Experience: College Diploma in Mechanical / Industrial Engineering Technology or University Degree in Mechanical / Industrial Engineering. Min 3-5 years of Manufacturing Engineering and manufacturing experience in fabrication and working in the production environment. Able to use SolidWorks, PDM, and ERP with at least two years of relevant experience. A minimum of one year of product design experience is required. The ability to read and interpret manufacturing drawings. Electrical knowledge would be considered an asset. Must have a valid driver's license and travel primarily in North America but potentially abroad. Additional Requirements: Demonstrated knowledge and understanding of OSHA. Understand how this position impacts the quality of products and services provided to our customers. Produce quality work (on-spec., on time, on budget) and take pride in your craft. Participate proactively in the continuous improvement process. Be self-motivated with a positive attitude and the ability to multi-task. Work well within a team environment or independently. Strong problem-solving and analytical skills. Excellent organizational, interpersonal, and communication skills. Maintain a professional, clean and safe work area.

*This is an office-based position with a heavy focus on preconstruction and estimating. Primary job duties will not be on project sites or manufacturing environments.* Internship Locations: Charlotte, NC Raleigh, NC Rock Hill, SC Norcross, GA Baltimore, MD Allen, TX Phoenix, AZ Austin, TX York, PA Job Summary: As a Project Engineer Intern at SteelFab, you'll work closely with our Preconstruction and Project Management teams. You'll take on responsibilities that will enhance your skills and prepare you for a successful career in the steel construction industry. Key Responsibilities: Preconstruction Gather subcontractor pricing for new project estimates. Review and analyze subcontractor bids to ensure alignment with project specifications. Perform detailed material and labor take-offs. Prepare pricing recaps for senior leadership. Visit job sites to see job progress and build relationships with clients and vendors Fabrication Shop Week: Gain hands-on experience with SteelFab's fabrication flow and production processes to deepen your understanding of the steel construction lifecycle. Project Management Project Management duties will be based on project schedules. Example duties: Draft and issue purchase orders and subcontracts to vendors. Evaluate design drawing revisions to identify and manage scope changes effectively. Manage the coordination of construction drawings and models and review submittals. Collaborate with onsite subcontractors to identify and resolve field issues. Why SteelFab? SteelFab is the nation's largest structural steel fabricator and a proud third-generation family-owned business. When you join us, you become part of a tradition of excellence and innovation in the construction industry. Our interns benefit from: Hands-on experience and mentorship from industry professionals. Clear paths for advancement within SteelFab and opportunities to shape your career. Building relationships with teammates, vendors, and industry leaders. SteelFab's commitment to fairness, reliability, and ethical practices. Desired Candidate Attributes We are looking for Project Engineer Interns who embody the values and qualities that drive SteelFab's success. Ideal candidates will demonstrate: A passionate and energetic approach to problem-solving and customer satisfaction. The ability to multitask in a fast-paced environment. An eagerness to learn, enthusiasm for the industry, and a desire for personal and professional growth. A team-first mentality, prioritizing collective success over individual achievement. Reliability and dependability Career Progression: Project Engineer Intern Project Engineer Assistant Project Manager or Estimator Project Manager (if previously APM) Senior PM or Senior Estimator Qualifications and Requirements Major: Engineering, Construction Management, or related fields Required: Microsoft Office experience, common computer skills. Valid driver's license Preferred: Some experience in the construction or engineering industry through work, internships, or part-time employment.

Title: Mechanical Engineer III Work Schedule: 8-10 hours/day, M-F. Interview Process: 1st round phone screen, 2nd round onsite Travel Requirements: Negligible Position will serve as a mechanical resource for Plant Engineering based in Hickory, NC facility. Main responsibility is to function as mechanical design support on project work to improve existing fiber optic cable manufacturing equipment. Job functions include: Design tooling and/or mechanical assemblies utilizing Inventor or AutoCAD Obtain quotes and order components Revise equipment drawings Develop experimental plans to validate designs Assemble or oversee assembly of systems with opportunity for hands on work Debug and resolve issues when integrating designs into production equipment Work closely with a cross functional engineering team including IT, process and electrical engineers/technicians Work with operations to update documentation and support training as needed PPE Required: Safety Glasses, Safety Gloves, Safety Shoes, Ear Plugs Required Education: BS in Mechanical Engineering, Mechanical Engineering Technology degree or comparable engineering experience Required Years and Area of Experience: 3+ Required Skills: Experience with mechanical system design and integration Ability to generate or modify mechanical models/drawings primarily using Inventor (or similar 3D CAD software), Vault and some AutoCAD Knowledge and application of drafting standards including GD&T Ability to work with machine shops/vendors to complete part procurement Hands on experience with mechanical system troubleshooting such as pneumatic controls, flow control, water cooling systems, etc. Experience with manufacturing equipment repair and maintenance Experience managing mechanics/electricians for equipment assembly and installation Desired Skills: Familiarity or experience with plastic extrusion manufacturing Experienced in electrical system troubleshooting including low and medium voltage systems, motion control, PLCs, temperature control systems, etc. Working knowledge of data analysis techniques using Microsoft Excel, PI and/or Power BI. Soft Skills (Communication/Team/Leadership): Works well in a team environment, is a "self-starter” and "results oriented”. Acts and make decisions in the best interest of the team. Complies with all policies and procedures of the plant. Works well with other disciplines (IT, electrical, and process engineering) to fully understand manufacturing system functionality and design requirements. Experience working in a manufacturing floor or construction environment, with a strong focus on job site safety. Proactive regarding safety. Seeks to identify and correct potential safety or environmental issues before they occur.

**The future is what you make it.** When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers, and doers who make the things that make the future. That means changing the way we fly, fueling jets in an eco-friendly way, keeping buildings smart and safe and even making it possible to breathe on Mars. Working at Honeywell isn't just about developing cool things. That's why our employees enjoy access to dynamic career opportunities across different fields and industries. **Are you ready to help us make the future? ** **ABOUT THE ROLE:** As a Mechanical Engineering Intern here at Honeywell, you will have the opportunity to gain hands-on experience and contribute to cutting-edge projects in the field of mechanical engineering. You will work closely with our team of experienced engineers and professionals, learning from their expertise and applying your knowledge to real-world challenges. This internship will provide you with valuable insights into the industry and help you develop essential skills for your future career in mechanical engineering. **In this role, you will have the opportunity to:** + Assist in the design and development of mechanical systems, components, and assemblies + Conduct research and analysis to support engineering projects + Collaborate with cross-functional teams to solve technical problems and optimize designs + Participate in testing and validation activities + Gain exposure to industry-standard tools and software **Location:** This position is available in multiple locations across the United States. _The exact worksite location will be selected based on business requirements and the candidate's relevant experience and qualifications._ The hourly base range for this position is $20.00/hr - $42.00/hr. Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. **MINIMUM QUALIFICATIONS:** + Currently pursuing a bachelor's degree (or higher) from an accredited college or university in Mechanical Engineering or similar field. + Must graduate December 2026 or later + Must continue enrollment in degree program upon completion of the internship + Validated academic excellence (3.0 GPA and higher) Honeywell is currently unable to consider applicants who would require current or future sponsorship for employment authorization for this position. Candidates must be authorized to legally work in the United States without current or future sponsorship requirements. **WE VALUE:** + Previous internship or project experience in mechanical engineering + Knowledge of industry standards and best practices + Familiarity with product testing and validation processes + Understanding of materials and manufacturing processes Interning at Honeywell provides hands-on experience with cutting-edge technologies, professional development, and mentorship within a global organization. Interns will receive relocation benefits and short-term housing if they are 50 miles or more from their assigned work location (excluding Puerto Rico and Canada). The application period for the intern position is estimated to be through the end of March 2026; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **\#HoneywellURNAM** Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

Come Build Your Career at Aecon! As a North American leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: * Safety Always. Our number one core value. If we can't do it safely, we don't do it at all. * Integrity. We lead by example, with humility and courage. * Accountability. We're passionate about delivering on our commitments. * Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: * Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being. * Believe in helping you build your career through our Aecon University and Leadership Programs. * Are committed to supporting and investing in inclusive work environments, through initiatives like Diversity, Equity, Inclusion, & Accessibility training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. * Are a leader in sustainable construction. With a strong commitment to operating responsibly by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement - driven by the diversity, expertise and teamwork of our people. We're always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! What is the Opportunity? At Aecon Engineering Services Inc. (United), we are a team of engineers, builders, planners, and thinkers that design and build today's infrastructure, for tomorrow. We come to work every day committed to drive growth and deliver projects that matter for our clients, ourselves, and our communities. Through our work in the nuclear, conventional generation, renewable and power delivery markets, we create resilient infrastructure to last generations. In December 2024, United Engineers and Constructors was acquired by Aecon Group Inc. Aecon and United have a proven working relationship and the United team continues to operate in the market as an engineering, procurement and construction (EPC) company. We are currently looking for a Mechanical Engineering Intern to join our Aecon engineering team onsite in our Charlotte, NC and Mt. Laurel, NJ offices. The successful candidate will work with our experienced engineers in designing nuclear and conventional generation power plants. What You'll Do Here: * Assist with mechanical engineering assignments of limited to moderate complexity. * Prepare mechanical calculations, bill of materials (BOM), and basic engineering drawings using CAD software. * Support plant data gathering and field walkdowns. * Maintain detailed design document files. What You Bring To The Team: * The successful candidate will have completed 3 years of a Bachelor of Science Degree in Mechanical Engineering from a 4-year ABET accredited college or university. * Completed coursework in thermodynamics, with power engineering and HVAC coursework preferred. * Proficient with Microsoft Office (Outlook, Word, Excel, PowerPoint, etc.) * Experience with graphical design software such as Autodesk AutoCAD * Experience working with others in a project team environment * Strong technical writing, presentation, and communication skills * Ability to work independently as well as in a team environment * Ability to prioritize and organize work in a multi-tasked environment Compensation: Hourly Rate: $25.00-$28.00 per hour Due to the nature of work that United performs, candidates must be a US Citizen or Permanent Resident of the United States. Aecon fosters diversity, inclusion and belonging within and across our organization. We consider all applicants for positions without regard to race, color, religion, sex, national origin, age, mental or physical disabilities, veteran status, and all other characteristics protected by law. We are committed to adhering to the objectives and requirements outlined in the Equal Employment Opportunity Commission (EEOC), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the EEOC and its applicable regulations. Appropriate accommodation under the EEOC will be provided upon request throughout the interview and hiring process.

Mechanical Engineering Interns support UPT's research and development efforts under the supervision of a Lead Engineer and/or Project Manager. Interns contribute to the design, analysis, testing, and documentation of mechanical systems and subsystems for defense, aerospace, and critical infrastructure applications. This role emphasizes hands-on R&D work in mechanisms, tribology, materials, and CAD, with exposure to the full early-stage engineering lifecycle. Responsibilities Support R&D engineers with mechanical design, analysis, testing, and documentation Develop and update CAD models and technical drawings Assist with mechanisms, tribology, and materials evaluation and selection Participate in prototype fabrication, laboratory testing, and data collection Support test planning, execution, and analysis, including MIL-STD-level evaluations Contribute to technical documentation and project planning activities Collaborate with mechanical, electrical, software, and systems engineers on integrated R&D efforts Required Qualifications Ability to apply mechanical engineering fundamentals to research and development problems Hands-on aptitude and strong attention to detail Ability to work effectively in a fast-paced, changing R&D environment Strong teamwork and communication skills Experience with 3D CAD modeling and engineering drawings Proficiency in MS Office (Excel and Word) U.S. citizenship required Ability to pass a background check Preferred Qualifications Coursework or experience in mechanisms, tribology, or materials engineering Experience with 3D printing. Interest in experimental testing, test plan development, and data analysis Interest in functional coatings or coating deposition technologies Education Requirement Current student who has completed two or more years in a Mechanical Engineering program at an ABET-accredited university

Corvid Technologies is seeking qualified candidates for an internship working with our Structural Mechanics Applications Group. The Structural Mechanics Applications Group supports a variety of government programs investigating dynamic phenomena including hypervelocity penetration, reactive material physics, material characterization, and weapon system evaluation. The group leverages its proprietary solver, Velodyne, which is a predictive multi-physics hydro-structural solver involving shock physics to understand and predict what happens to matter (gas, liquid, or solid) under extreme loading conditions, and involves structural mechanics to analyze the behavior of solid structures when exposed to applied mechanical loads. Qualifications Knowledge of structural dynamics and mechanics, numerical methods, and finite element analysis Working knowledge of CAD and numerical grid generation techniques and applications Experience with FEA software (Ansys, Abaqus, LS-Dyna) Background in physics, mechanical engineering, or material science with computer modeling and simulation interests US Citizenship required Why Corvid: Founded in 2004, we are a group of over 300 engineers and scientists, about 3/4 with master' degrees or Ph.D.'s, that provide end-to-end solutions including concept development, design and optimization, prototype build, test and manufacture. We leverage the predictive capability of our high-fidelity computational physics solvers, indigenous massively parallel supercomputer system, prototyping plant, and ballistics and mechanics lab to investigate a variety of high-rate physics phenomena. The results are complex engineering solutions for a variety of applications; aircraft, ballistic missile defense, cybersecurity, motorsports, armor development, biological systems, and missile and warhead design and development. These results are achieved with optimal design and cost efficiency due to the predictive capability of Corvid's tools and our in-house, end-to-end integrated approach, which differentiates Corvid from the market.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is seeking early-career Facility and Process Junior Mechanical Engineers who are eager to contribute to large-scale infrastructure projects that positively impact our communities. Leveraging Parsons' deep industry experience alongside your developing engineering expertise, you'll gain strong career growth potential, including advancement opportunities tied to top performance, as well as robust training, development, and exposure to marquee projects in a fast-paced business. We are looking for versatile, collaborative engineers who thrive in a flexible, team-oriented environment and bring strong communication, analytical, and organizational skills. In this role, you will perform a variety of mechanical engineering tasks using standard engineering techniques and analysis tools-often involving CAE/CAD applications-and you should be willing to travel to supplier, client, or construction sites as needed. This is a hybrid position, working 1-2 days per week from our Houston, TX, or Charlotte, NC office. Responsibilities: * Completes a variety of assignments such as drawings, specifications, and other materials suitable for procurement and construction purposes, utilizing CAE/CAD as applicable. * Prepares standard engineering computations, material quantity takeoffs, estimates, surveys, and designs. * Reviews design documents produced by other engineering teams for compliance with applicable codes and owner standards. * Interfaces with vendors to review submittals, coordinate interfaces, and perform acceptance testing. * Coordinates with contractors to review completed work, resolve conflicts, and answer RFIs. * Prepares detailed requisitions for equipment and materials. * Reviews supplier drawing submittals and assists in performing technical bid analyses. * Prepares and issues specifications, data sheets, and other construction documents. * Provides input and technical guidance to CAD Designer/Drafters, Designers, and lower level Engineers working on the same project. * Knowledge and interpretation of the International Building Code. * Knowledge and interpretation of code compliance requirements and industry standards for the oil, gas, and chemical industries * Performs preliminary design activities including studies and alternatives analysis * Performs other responsibilities associated with this position as may be appropriate Qualifications: * Bachelor's degree in Engineering (or related field) and 1+ years of related work experience * Experience in large, complex HVAC projects, including equipment selection and specification, developing and reading control diagrams, and managing equipment lists. * Experience with large central chilled water plants, including chiller selection and layout, piping, hydraulic calculations, cooling towers, and controls. * Experience working on interdisciplinary teams to design new facilities and modifications to existing facilities. * EIT nice to have * Must be proficient with Navisworks for review of 3D designs, coordination, and clash resolution. * Working knowledge of CAD/Revit and other PC software packages typically associated with engineering. Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $62,300.00 - $109,000.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

Are you a recent graduate with a passion for building design? If a fast paced, collaborate environment is one you thrive in and you are ready to be part of one of the top ranked MEP consulting engineering firms in the United States, then we want to start a conversation with you! Plumbing systems and design are an integral part of building design. We are looking for top notch talent to join our team. Jordan & Skala s team of talent is what distinguishes our company from the rest. What will make you rise to the top? Strengths: AutoCAD proficient; Revit experience is a plus! Bachelors in Mechanical Engineering is preferred: EIT preferred Interest in Building Construction Design Experience: Plumbing and Fire Protection Design Water distribution, storm drainage, sanitary waste and vent, and natural gas distribution design Plumbing system components including fixtures, specialties, and equipment Fire Protection design including pumps, standpipes, and specialties New building construction design JSE has a robust portfolio of project types including hospitality, commercial office building, retail/ restaurant, industrial, healthcare, and multi-family construction projects. Why join us? Jordan & Skala Engineers is a great place to work! We offer a family friendly environment with competitive benefits, teleworking options, flexible PTO, wellness incentives, professional development, and more. At Jordan & Skala, you will be consistently challenged by interesting projects. Your opportunities will be limited only by your ambition! EMPLOYEE GROWTH & DEVELOPMENT JSE University In House Seminars & Technical Training Lunch & Learns Encouraging Professional Licensure Paid Time Off for FE and PE Exam Study Preparation Financial Assistance toward Educational Development HELPING YOU MAINTAIN BALANCE Teleworking options PTO (Flexible Time Off Policy) Paid Holiday (8) Paid Time for Employee s Birthday policy Paid Bereavement Leave Fitness Incentive Program Wellness Programs Booster Programs Employee Assistance Program FINANCIAL 401(k) Plan Competitive Employer Match Discretionary Bonuses 3 Times per Year Flexible Spending Accounts Heath Savings Accounts and Employer Contributions Financial Seminars Bonus for passing FE Exam and first-time passing PE Exam Competitive Compensation Exempt Employees eligible for Excess Hours Compensation policy INSURANCE Company paid Life and AD&D Insurance Health Insurance Company paid Employee Vision & Dental Insurance Company paid Short-Term Disability Company paid Long Term Disability Voluntary Plans (Critical Illness/Cancer, Accident) Are you ready to be part of kicking off our next big project? Apply here and start a conversation with us today! Jordan & Skala Engineers is a leading mechanical, electrical and plumbing engineering firm with regional design offices located throughout the United States. Jordan & Skala has grown to be one of the largest consulting engineering firms in the U.S., ranked by Consulting-Specifying Engineer trade publication as a top MEP Giant consistently since 2004. Founded as a corporation in 1953, the firm has built a national client base by utilizing its considerable technical and personnel resources to deliver innovative designs on time and within budget. In the professional engineering industry, there is no substitute for experience. Jordan & Skala Engineers has participated in the design and construction of thousands of buildings throughout the United States, Central America, and the Caribbean. Our firm is committed to providing innovative consulting engineering solutions for any project challenge.

Job Description Mechanical Drafter Charlotte, NC ProSearch Recruiting Partners, an independent franchise of the MRINetwork specializing in factory automation career recruitment is hiring for very well established automation company who needs a Mechanical Design Engineer who is highly proficient with Inventor to join its team. The Mechanical Design Engineer will provide manufacturing and engineering solutions for a dynamic array of challenging industrial automation solutions. The Mechanical Drafter will be responsible for: Reviewing and evaluating customer supplied specifications and requirements for mechanical designs. Designing and recommending robust, cost effective solutions that meet customer's requirements as well as industry and safety standards. Understanding and ensuring compliance to ANSI, ISO, OSHA, and EU (if applicable) standards in the design of safety guards Developing complete design requirements including, but not limited to, mathematical calculations, detailed specifications, and evaluation of materials, assemblies, and components for strength\FEA Designing with company standard components, components from established vendors, and utilize internal fabrication and machining capabilities. Translating designs into accurate Bills of Materials and labor estimates. Producing detailed quotations or offer letters that differentiate our proposals from competitors to maximize wins. Creating and maintaining mechanical drawing package including 3D models and 2D Drawings for customer approval and for internal/external fabrication and assembly. Reviewing and updating models and drawings as needed throughout project lifecycle. Working closely with project team to provide technical support throughout project lifecycle Providing technical support to sales team, specialists and customers as needed Developing tools, techniques and best practices to improve the response time, accuracy, and efficiency of the design process. Identification and maintenance of product standards Assisting in populating CAD libraries. Storing, retrieving, and maintaining technical documents within Autodesk Vault. Following company technical standards for design and engineering. Maintaining professional working relations with Associates, Vendors, and Customers Maintaining high quality standards. The Mechanical Drafter will excel with: Bachelor's degree (B. S.) in Engineering Machine design and system integration experience. Experience with hydraulics, pneumatic actuators, valves, and controls a plus. Proficient with 3D design software (Inventor) A keen attention to detail with strong organizational skills Ability to work independently and manage multiple tasks Excellent written and verbal communication skills Committed team player with caring attitude Proficiency with use of Microsoft Office software tools: Word, Excel, Outlook, PowerPoint Ability to read and understand drawings and BOM's Ability to draw and interpret pneumatic schematics. The Mechanical Drafter will be rewarded with: $83,000-85,000,000 Base Annual Salary, DOE 401K Retirement Savings 9 Paid Holidays Paid time Off (PTO) up to 5 weeks based on years of service Comprehensive Medical & Dental Insurance Life, AD&D Insurance Short & Long Term Disability Long Term Care Insurance Employee Assistance Program Flexible Spending Account Plan Direct Deposit Annual Service Awards Must be authorized to work in the United States without sponsorship This Company uses E-Verify to confirm identity and employment eligibility

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the Southeast. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! Detailed Description: How Will You Make an Impact?: Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with people managers, project managers, engineers, scientists, and multidisciplinary teams to support projects in water, wastewater, drinking water, environmental engineering, design, sustainability, climate mitigation, and more. * Assist in the preparation of technical deliverables including but not limited to calculations, reports, drawings, specifications, and memoranda. * Potential to participate in field work and site visits to support project design, construction, and data collection activities. * Perform data entry, analysis, and visualization to support engineering and scientific evaluations. * Ensure quality and accuracy by adhering to Brown and Caldwell's QA/QC processes and standards. * Communicate effectively with internal teams and external clients to coordinate project tasks and deliverables. * Support engineering services during construction by reviewing submittals, conducting inspections, and verifying conformance with plans and specifications. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in Environmental, Civil, Mechanical, Structural, Electrical, Chemical Engineering or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26

Welcome to our Energy division Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,581 experts in 15 countries, covering the full spectrum of technologies and all parts of the value chain, we plan, design, and implement energy solutions all over the world. Ramboll in Americas Ramboll has 2,000 experts working across 72 offices in the Americas applying their passion to deliver innovative solutions within Environment & Health, Water, Energy and Planning & Urban design. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering culture. Job Description Your New Role Our group's projects include the design of HVAC and utility systems of varying complexity. Project types include, but are not limited to, the following: Manufacturing (pharmaceuticals, aerospace, food & beverage, chemicals). Pharmaceutical (ISO class manufacturing spaces, Wet & Dry labs, offices) Wastewater Treatment (pump stations, screening buildings, chemical treatment buildings, wet/dry wells, industrial wastewater treatment plants) Commercial (offices, warehouses) Higher Education (central plants, thermal distribution systems, building level HVAC) Your key tasks and responsibilities will be: Coordinate with other engineering disciplines to produce final construction drawings and details associated with multidisciplinary engineering projects. Perform engineering design concept development and calculations on complex and unique mechanical designs including, HVAC, process piping, plumbing, and minor aspects of fire protection and plumbing. Prepare project drawings and specifications. Demonstrate a understanding of heating and cooling mechanical systems (chilled water, hydronic hot water, and steam) as well as HVAC systems. Perform technical reviews and coordination with other trades on the project. Conducting on-site fieldwork as required to develop a comprehensive package of contract documents (drawings and specifications) Interface with clients and represent Ramboll by adhering to our values. Qualifications About You 10+ years of experience B.S. (or higher) in Mechanical Engineering Ability to foster a creative engineering environment Strong communication skills, (both written and verbal) Ability to work across a wide range of areas within the mechanical engineering discipline Ability and desire to obtain professional registration (FE and PE) Strong computer skills in the Microsoft Office suite of programs Proven experience in Revit MEP preferred Proficiency in other engineer software proffered; to include HAP, Pipeflow, Caesar, Trane Trace. Personal qualities that will help you succeed in this role include: ability to effectively lead a team, balance scope, schedule, and budgets, proactively plan and execute a project, and the ability to effectively communicate both internally and externally. Additional Information All your information will be kept confidential according to EEO guidelines.

We are seeking a motivated and detail-oriented engineering student to join our team as a Solid Waste Engineer Intern for the Fall and Spring semesters. This multi-semester internship offers hands-on experience in solid waste management, environmental compliance, and sustainability initiatives. The intern will support technical projects, data analysis, and field operations under the guidance of experienced engineers. Duties: Assist in the design, evaluation, and optimization of solid waste systems including collection, transfer, recycling, and disposal. Conduct field inspections and site assessments of landfills, transfer stations, and recycling facilities. Analyze environmental data and prepare technical reports, charts, and presentations. Support regulatory compliance efforts including permit applications, reporting, and documentation. Collaborate with cross-functional teams on sustainability and waste reduction initiatives. Perform GIS mapping and spatial analysis related to waste infrastructure and service areas. Participate in stakeholder meetings and contribute to project planning and development. Requirements Currently enrolled in a Bachelor's or Master's program in Environmental Engineering, Civil Engineering, or a related field. Completion of at least sophomore year by the start of the internship. Strong analytical, organizational, and communication skills. Proficiency in Microsoft Office Suite; experience with GIS, AutoCAD, or data analysis tools is a plus. Ability to work independently and manage multiple tasks effectively. Interest in environmental sustainability and public infrastructure. Schedule: • Part-time: 20-30 hours per week during Fall and Spring semesters. • Flexible scheduling to accommodate academic commitments. Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

Wharton-Smith, Inc., a highly regarded construction company, is seeking qualified candidates for a Project Engineer - Intern position. This position is located at our regional office in Charlotte, NC. About this Job Coordinates and assists the Project Engineer & Project Manager with planning, organization, and completion of project within an area of assigned responsibility. Some duties may be: Reviewing project plans and conferring with management. Reviewing bids from contractors. Maintaining a safe and clean working environment by enforcing procedures, rules, and regulations. Contributing to team effort by accomplishing related results as needed. Data entry Assisting the Project Manager or Project Engineer with daily tasks/duties. About Wharton-Smith, Inc. Wharton-Smith helps build communities - from delivering clean water, state-of-the-art schools, fire and police stations, to recreational parks, sports arenas, themed attractions, and more.A company's character is revealed in what it does. Improving the quality of life wherever we do business is part of our heritage and culture and is an indispensable part of achieving our vision - to be the construction group of choice. A Building Construction Manager and General Contractor, Wharton-Smith specializes in water treatment, municipal, education, entertainment, and hospitality projects - all the things a community needs to thrive. Founded in 1984 by Bill Wharton and George Smith, today, our employees are proud to be a part of a company that makes a positive difference in the lives of our clients, our employees and those in the communities where we live and work. At the heart of our success throughout the years has been our ability to identify and respond to industry opportunities and challenges ahead of the competition. We have ambitious plans. We've been laying a dynamic growth path for our company. We want, and expect, to play a larger role in the $3.6 billion building construction industry. We see an opportunity not just to lead in our markets, but to re-imagine and transform them. Our recruiting process is centralized and is handled by our HR Department. If we are sent unsolicited resumes from recruiters, we will not pay any recruiting fees. Unsolicited resumes are any resumes sent to us by a recruiter who has not been pre-approved by HR, has not signed our contract, and has not been requested by our HR Department to search for a specific position.

Job Description Job Overview: EM Structural is looking for a Project Engineer I who wants to be part of a growing team of engineers, works well on a team, and is self-motivated. As a Project Engineer Intern, you will have the opportunity to gain hands-on experience and practical skills in engineering project management and execution. You will work closely with experienced project managers and engineers on ongoing projects, assisting in various project-related tasks and gaining valuable insight into the engineering profession. Key responsibilities include: Project Support: Provide support to project managers and engineers in the planning, execution, and delivery of engineering projects. Documentation: Assist in the preparation and maintenance of project documentation, including drawings, specifications, reports, and other project deliverables. Technical Tasks: Conduct technical tasks such as research, data collection, analysis, and calculations under the guidance of senior engineers. Coordination: Coordinate project activities, resources, and stakeholders to ensure alignment with project goals and objectives. Field Work: Participate in site visits, inspections, and surveys to gain practical experience and exposure to project implementation. Client Interaction: Interact with clients, contractors, and other project stakeholders to provide updates, address inquiries, and support project communication efforts. Learning and Development: Take advantage of learning opportunities to expand your knowledge and skills in engineering concepts, project management practices, and industry standards. Qualifications: Currently pursuing a bachelor's degree in engineering or related field. Strong academic background with coursework in civil, mechanical, electrical, or related engineering disciplines. Excellent communication and interpersonal skills, with the ability to work effectively in a team environment. Detail-oriented with strong organizational and time management skills. Proficiency in Microsoft Office suite (Word, Excel, PowerPoint). Prior internship or work experience in engineering or construction-related fields is a plus but not required. Enthusiasm for learning and a desire to gain practical experience in engineering project management. Benefit: Hands-on experience and exposure to real-world engineering projects. Mentorship and guidance from experienced professionals in the field. Opportunity to apply classroom knowledge to practical engineering tasks. Networking opportunities with industry professionals and peers. Potential for future employment opportunities within the company based on performance and availability. EM Structural is an equal opportunity employer and values diversity in the workplace. We do not discriminate based on race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable laws.

At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil, 'all, Loctite, Snuggle, and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. Dare to learn new skills, advance in your career and make an impact at Henkel. What you'll do As a Project Engineering Intern supporting our Loctite brand, you will: * Work on an engaging, hands-on project that contributes meaningfully to real-world engineering initiatives. * Assist in the development and maintenance of Piping & Instrumentation Diagrams (P&IDs). * Support the specification, procurement, and installation of equipment for ongoing projects. * Contribute to project scheduling and budget tracking to ensure timely and cost-effective execution. * Participate in instrument and process qualification activities to meet performance and safety standards. * Gain practical technical skills while collaborating with experienced engineers in a dynamic manufacturing environment. What makes you a good fit * A rising senior graduating in 2027 pursuing a degree in Chemical Engineering, Mechanical Engineering or Industrial Engineering * Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook). * Familiarity with AutoCAD; ability to read and edit technical drawings is a plus Some benefits of joining Henkel as an intern * Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. * Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. * Networking events with Henkel business leaders, experts and sustainability ambassadors. * Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. * In-person and virtual social events to connect with other Henkel interns across the country. Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. Additional information * This internship is eligible for a housing stipend or relocation support. * Henkel's Summer 2026 internship program starts on May 27th, 2026, and runs through mid-August. * Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. * If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. * If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. JOB ID: req74894 Job Locations: United States, NC, Salisbury, NC Contact information for application-related questions: ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. Application Deadline: As long as the vacancy is listed on our Career Site, we are happy to receive your application Job-Center: If you have an application already, you can create or log in to your account here to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. Accept for all YouTube content LOAD EXTERNAL CONTENT Deactivate loading external content from YouTube. How is work at Henkel About Henkel Building on a strong legacy of almost 150 years, we are leading the way to reimagine and improve life every day. Today and for generations to come. Through our innovative and sustainable brands and technologies, across our teams around the world. Henkel holds leading positions in both industrial and consumer businesses: Our portfolio includes well-known hair care products, laundry detergents, fabric softeners as well as adhesives, sealants, and functional coatings.

**The future is what you make it.** When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers, and doers who make the things that make the future. That means changing the way we fly, fueling jets in an eco-friendly way, keeping buildings smart and safe and even making it possible to breathe on Mars. Working at Honeywell isn't just about developing cool things. That's why our employees enjoy access to dynamic career opportunities across different fields and industries. **Are you ready to help us make the future?** **ABOUT THE ROLE:** As a Mechanical Engineering Intern here at Honeywell, you will have the opportunity to gain hands-on experience and contribute to cutting-edge projects in the field of mechanical engineering. You will work closely with our team of experienced engineers and professionals, learning from their expertise and applying your knowledge to real-world challenges. This internship will provide you with valuable insights into the industry and help you develop essential skills for your future career in mechanical engineering. **In this role, you will have the opportunity to:** + Assist in the design and development of mechanical systems, components, and assemblies + Conduct research and analysis to support engineering projects + Collaborate with cross-functional teams to solve technical problems and optimize designs + Participate in testing and validation activities + Gain exposure to industry-standard tools and software **Location:** This position is available in multiple locations across the United States. _The exact worksite location will be selected based on business requirements and the candidate's relevant experience and qualifications._ **Pay Range:** The hourly base range for this position is $20.00/hr - $42.00/hr. Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. **MINIMUM QUALIFICATIONS:** + Currently pursuing a bachelor's degree (or higher) from an accredited college or university in Mechanical Engineering or similar field. + Must graduate December 2026 or later + Must continue enrollment in degree program upon completion of the internship + Validated academic excellence (3.0 GPA and higher) + Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status Honeywell is currently unable to consider applicants who would require current or future sponsorship for employment authorization for this position. Candidates must be authorized to legally work in the United States without current or future sponsorship requirements. **WE VALUE:** + Previous internship or project experience in mechanical engineering + Knowledge of industry standards and best practices + Familiarity with product testing and validation processes + Understanding of materials and manufacturing processes Interning at Honeywell provides hands-on experience with cutting-edge technologies, professional development, and mentorship within a global organization. Interns will receive relocation benefits and short-term housing if they are 50 miles or more from their assigned work location (excluding Puerto Rico and Canada). The application period for the intern position is estimated to be through the end of March 2026; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. \#HoneywellURNAM Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

Come Build Your Career at Aecon! As a North American leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: * Safety Always. Our number one core value. If we can't do it safely, we don't do it at all. * Integrity. We lead by example, with humility and courage. * Accountability. We're passionate about delivering on our commitments. * Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: * Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being. * Believe in helping you build your career through our Aecon University and Leadership Programs. * Are committed to supporting and investing in inclusive work environments, through initiatives like Diversity, Equity, Inclusion, & Accessibility training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. * Are a leader in sustainable construction. With a strong commitment to operating responsibly by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement - driven by the diversity, expertise and teamwork of our people. We're always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! What is the Opportunity? At Aecon Engineering Services Inc. (United), we are a team of engineers, builders, planners, and thinkers that design and build today's infrastructure, for tomorrow. We come to work every day committed to drive growth and deliver projects that matter for our clients, ourselves, and our communities. Through our work in the nuclear, conventional generation, renewable and power delivery markets, we create resilient infrastructure to last generations. In December 2024, United Engineers and Constructors was acquired by Aecon Group Inc. Aecon and United have a proven working relationship and the United team continues to operate in the market as an engineering, procurement and construction (EPC) company. United Engineers and Constructors, an Aecon Company, is seeking Mechanical Engineering graduates to join our Aecon engineering teams in our Charlotte, NC and Mt. Laurel, NJ offices. The successful candidate will work with our experienced engineers designing and modifying nuclear and conventional generation power plants. What You'll Do Here: * Under the direction of an experienced engineer, develop new mechanical designs and plant modification packages. * Assist with mechanical engineering assignments of limited to moderate complexity. * Perform hydraulic and heating, ventilating, and air-conditioning (HVAC) calculations. * Develop mechanical design drawings, bill-of-materials (BOM), line/valve lists and specifications. What You Bring To The Team: * Bachelor of Science in Mechanical Engineering from a 4-year ABET accredited college or university * Must have completed coursework in thermodynamics, with experience with power generation thermal cycles. * Proficient with Microsoft Office (Outlook, Word, Excel, PowerPoint, etc.) * Experience with graphical design software such as Autodesk AutoCAD * The ability to prepare documents and presentations using Microsoft Word, Excel and PowerPoint. * Take ownership of engineering work performed on a project. * Experience working with others in a Project Team environment. * Good written and oral communications skills. * Analytical and problem-solving skills. * Field experience is a plus, along with the ability to perform site walk-downs. Preferred Requirements: * Internship or work-study experience related to mechanical engineering. * EIT/FE Certification with a minimum 3.0 GPA * Coursework in heating, ventilation, air-conditioning (HVAC) and power engineering * Experience with AutoDesk Plant3D design software * Previous experience with an engineering firm in the power, government or oil & gas industry. * Hands-on experience with mechanical systems within an industrial facility Salary Range Base Salary Range: $70,000.00 - $80,000.00 Benefits Include: * Health Insurance Benefits (Comprehensive Plan- Dental/Medical/Vision) * 401K (comprehensive match plan) * Paid Vacation - (vacation/wellness days) * Health and Wellness Home Benefit - (wellness subsidy for fitness/health) * Tuition Reimbursement - (strong career growth support for approved degrees, diplomas and courses) Due to the nature of work that United performs, candidates must be a US Citizen or Permanent Resident of the United States. Aecon fosters diversity, inclusion and belonging within and across our organization. We consider all applicants for positions without regard to race, color, religion, sex, national origin, age, mental or physical disabilities, veteran status, and all other characteristics protected by law. We are committed to adhering to the objectives and requirements outlined in the Equal Employment Opportunity Commission (EEOC), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the EEOC and its applicable regulations. Appropriate accommodation under the EEOC will be provided upon request throughout the interview and hiring process.

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you'll do** As a Project Engineering Intern supporting our Loctite brand, you will: + Work on an engaging, hands-on project that contributes meaningfully to real-world engineering initiatives. + Assist in the development and maintenance of Piping & Instrumentation Diagrams (P&IDs). + Support the specification, procurement, and installation of equipment for ongoing projects. + Contribute to project scheduling and budget tracking to ensure timely and cost-effective execution. + Participate in instrument and process qualification activities to meet performance and safety standards. + Gain practical technical skills while collaborating with experienced engineers in a dynamic manufacturing environment. **What makes you a good fit** + A rising senior graduating in 2027 pursuing a degree in Chemical Engineering, Mechanical Engineering or Industrial Engineering + Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook). + Familiarity with AutoCAD; ability to read and edit technical drawings is a plus **Some benefits of joining Henkel as an intern** + Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. + Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. + Networking events with Henkel business leaders, experts and sustainability ambassadors. + Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. + In-person and virtual social events to connect with other Henkel interns across the country. **Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. ** **Additional information** + This internship is eligible for a housing stipend or relocation support. + Henkel's Summer 2026 internship program starts on May 27th, 2026, and runs through mid-August. + Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. + If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. + If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** req74894 **Job Locations:** United States, NC, Salisbury, NC **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel