Mechanical engineering internship jobs in Colton, CA

**Company Information** Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect solutions to industries like Aerospace, Military & Defense Electronics, Space, Medical, Test & Measurement, and Industrial. Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. At Amphenol CIT, we make the amazing possible. Take the next step to become an integral part of our team by applying today and kickstart your journey with us. **SUMMARY** The AmphenolCDI Mechanical Engineering position is a leader and contributor for activities related to the implementation and use of Lean / COS activity in the facility. This position is expected to use engineering principles and tools to identify areas for opportunity, support and contribute to the team to analyze data and implement improvements. This position will help lead the team to drive down costs, control variation, and improve processes. Reporting to the COS Manager, part of the team that will drive continuous improvement in the facility. In addition, this position will provide full-time environmental health and safety support to the operations of the factory and will ensure that all practices are in compliance with Federal, State and CDI regulatory requirements. **ESSENTIAL JOB FUNCTIONS** + Provide overall support and contribution in COS problem solving to the team. + Significant problem-solving involving changes in products, processes and equipment leading to improvement to improve the business. + Assisting in the development of new processes including, standard work, Product Instructions and Manufacturing Instructions + Practice safe working techniques and re-enforce the safety policies, guidelines, and procedures as set out by the Company. + Provide daily guidance and direction in EHS programs at the employee / supervisor level to ensure a common and effective approach + Ensure that contractor personnel working on the property are in compliance with CDI policies and safety requirements. + Provide advice, assist, and audit line management to ensure that effective EHS is implemented and working. + Perform and contribute to the Site Training Plans by conducting employee orientations; emergency response training; and coordination of modular training programs for the operation. + Assist with maintaining the Site Preparedness and Emergency Plans & Procedures + Assist in evaluating new tools, equipment, and processes to aid in production efficiency and safety + Providing data and analysis to drive CAPEX decisions + Competency in tools such as 8D, PFMEA, DMEA, Root Cause Analysis, etc. + Participate in and lead Continuous Improvement events + Review accidents and incidents which occur in the area of responsibility and conduct field audits, reporting and managing the corrective actions. + Maintain filing systems regarding worker training and safety. + Maintain working relationships with Regulatory Agencies and chair or co- chair and lead the Safety Committee for the Operation. _*Other duties as required in support of the department and the company*_ **SUPERVISOR RESPONSIBILITIES** **Non-Supervisory Role** The responsibilities of this role do not include supervising other employees. **QUALIFICATIONS** + To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. + 0-1 years of experience in engineering and continuous improvement and an understanding of electromechanical assembly and test; wire harness manufacturing, RF cable, RF connector build and test familiarity a plus + Demonstrated analytical, problem solving, and change management skills in complex organizations + Dynamic communication skills with ability to work at all levels of an organization including briefings to senior leaders + Preferred experience in Environmental Health and Safety role + Has or willing to obtain EH&S Certification or Training + Excellent computer skills, including MS Office and Minitab **EDUCATION and EXPERIENCE** + Bachelor's degree required in Engineering or other STEM background **CERTIFICATES, LICENSES, REGISTRATIONS** + Six Sigma Green Belt a plus with award certification through ASQ or an equivalent body. Progress toward Green Belt certification may be considered with appropriate level of expertise and experience **LANGUAGE REQUIREMENTS** + Excellent verbal and written communication skills in English. + Conversational in any other language is a plus. **JOB SKILLS** + The ability to work with mathematical concepts such as probability and statistical inference. + Proficient written and verbal communication skills. + Team player and able to build and maintain relationships both internal and external. + Flexible to change and open to constructive feedback. + Strong organizational and interpersonal skills. + Able to work independently with minimal supervision. **PHYSICAL DEMANDS** As part of their job duties, the employee must sit for lengthy periods while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to stand, walk, reach, and occasionally lift objects weighing up to twenty (20) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. **WORK ENVIRONMENT** A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. **ENVIRONMENTAL POLICY** Amphenol CDI is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. **PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS** + ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. + Clear ANSI Z87.1 safety-rated glasses in specific areas. + Hearing protection in specific locations. + Ability to compile with JSA in specific areas. **EXPORT COMPLIANCE DISCLAIMER** This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). **TRAVEL** Approximately **0-5** % of travel is expected. **SALARY INFORMATION:** According to several states' laws, this position's salary is **$25** an hour. However, this salary information is merely a general guideline. When extending an offer, AmphenolCDI considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. AMPHENOL CIT RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." THE AFOREMENTIONED JOB REQUIREMENTS ARE SUBJECT TO CHANGE TO REASONABLY ACCOMMODATE QUALIFIED DISABLED INDIVIDUALS. Amphenol CIT is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. For more information regarding EEOC requirements please visit **************************************************************** ***************************************************************************************************** Due to the nature of our business, the candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol CIT participates in the United States Department of Homeland Security E-Verify program. The E-Verify program is a web-based employment eligibility verification system for newly hired employees operated by the U.S. Citizenship and Immigration Services. Any candidate that needs an accommodation or assistance with the application process should contact HR at ******************************** **Job Details** **Pay Type** **Hourly**

The AmphenolCDI Mechanical Engineering position is a leader and contributor for activities related to the implementation and use of Lean / COS activity in the facility. This position is expected to use engineering principles and tools to identify areas for opportunity, support and contribute to the team to analyze data and implement improvements. This position will help lead the team to drive down costs, control variation, and improve processes. Reporting to the COS Manager, part of the team that will drive continuous improvement in the facility. In addition, this position will provide full-time environmental health and safety support to the operations of the factory and will ensure that all practices are in compliance with Federal, State and CDI regulatory requirements. ESSENTIAL JOB FUNCTIONS Provide overall support and contribution in COS problem solving to the team. Significant problem-solving involving changes in products, processes and equipment leading to improvement to improve the business. Assisting in the development of new processes including, standard work, Product Instructions and Manufacturing Instructions Practice safe working techniques and re-enforce the safety policies, guidelines, and procedures as set out by the Company. Provide daily guidance and direction in EHS programs at the employee / supervisor level to ensure a common and effective approach Ensure that contractor personnel working on the property are in compliance with CDI policies and safety requirements. Provide advice, assist, and audit line management to ensure that effective EHS is implemented and working. Perform and contribute to the Site Training Plans by conducting employee orientations; emergency response training; and coordination of modular training programs for the operation. Assist with maintaining the Site Preparedness and Emergency Plans & Procedures Assist in evaluating new tools, equipment, and processes to aid in production efficiency and safety Providing data and analysis to drive CAPEX decisions Competency in tools such as 8D, PFMEA, DMEA, Root Cause Analysis, etc. Participate in and lead Continuous Improvement events Review accidents and incidents which occur in the area of responsibility and conduct field audits, reporting and managing the corrective actions. Maintain filing systems regarding worker training and safety. Maintain working relationships with Regulatory Agencies and chair or co- chair and lead the Safety Committee for the Operation. * Other duties as required in support of the department and the company* SUPERVISOR RESPONSIBILITIES Non-Supervisory Role The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 0-1 years of experience in engineering and continuous improvement and an understanding of electromechanical assembly and test; wire harness manufacturing, RF cable, RF connector build and test familiarity a plus Demonstrated analytical, problem solving, and change management skills in complex organizations Dynamic communication skills with ability to work at all levels of an organization including briefings to senior leaders Preferred experience in Environmental Health and Safety role Has or willing to obtain EH&S Certification or Training Excellent computer skills, including MS Office and Minitab EDUCATION and EXPERIENCE Bachelor's degree required in Engineering or other STEM background CERTIFICATES, LICENSES, REGISTRATIONS Six Sigma Green Belt a plus with award certification through ASQ or an equivalent body. Progress toward Green Belt certification may be considered with appropriate level of expertise and experience LANGUAGE REQUIREMENTS Excellent verbal and written communication skills in English. Conversational in any other language is a plus. JOB SKILLS The ability to work with mathematical concepts such as probability and statistical inference. Proficient written and verbal communication skills. Team player and able to build and maintain relationships both internal and external. Flexible to change and open to constructive feedback. Strong organizational and interpersonal skills. Able to work independently with minimal supervision. PHYSICAL DEMANDS As part of their job duties, the employee must sit for lengthy periods while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to stand, walk, reach, and occasionally lift objects weighing up to twenty (20) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Amphenol CDI is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL Approximately 0-5% of travel is expected. SALARY INFORMATION: According to several states' laws, this position's salary is $25 an hour. However, this salary information is merely a general guideline. When extending an offer, AmphenolCDI considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations.

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Senior Staff Mechanical Engineer Location: Irvine, CA Position Description: We are seeking a Senior Staff Mechanical Engineer to design, implement, and test advanced autonomy and control systems for unmanned aerial vehicles. The Senior Staff Mechanical Engineer in this position will be responsible for a wide gamut of mechanical engineering tasks including vehicle design, payload integration, structural modifications, mechanism design, and analysis. The ideal candidate will have strong problem-solving skills and be able to work well both on an individual basis and in a team environment. The candidate must be able to function and communicate in an interdisciplinary team (Aero, Electrical, Software, etc.). Required Skills/Qualifications: * Thorough understanding of workings of Machine Elements such as bearings, seals, snap rings, and mechanical fasteners. * Fundamental understanding of highly loaded lightweight structures * Experience taking products from concept through detailed design, build, test and production. * Experience with design, build, and test of integrated mechanical assemblies. * First-hand experience of various manufacturing process such as machining, welding, injection molding etc. * Troubleshooting experience for mechanisms and structures * Working knowledge of GD&T per ASME 14.5 * Proficient with Microsoft Word, Excel, PowerPoint and Visio for documentation, communication and presentation of work products. * Proficient with 3D CAD Software Preferred Skills/Qualifications: * Fabrication or machine shop experience * Working knowledge of basic aircraft aerodynamics and performance * Experience with mechatronic system design and integration * Experience with lightweight metallic and composites structure * Experience developing and integrating new capabilities into existing military aircraft systems. * Experience with MIL-STD-810 or DO-160 for aircraft environmental engineering. * Experience integrating COTS solutions into military aircraft systems. * Experience with integrating communication systems into military aircraft (Electronics Packaging, Antenna Placement, Connectorization). * Knowledge of test equipment and instrumentation (Strain Gauges, Accelerometers, Thermocouples, etc.) * Experience with SolidWorks CAD Software Education: * Bachelor's Degree in STEM field (Science, Technology, Engineering or Math) from an accredited university. * At least 10 years engineering experience in aerospace or related technology field with at least 3 years' experience in a rapid development environment. Clearance Level Required: No Travel: 10% Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. * Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine * Involves movement between departments, floors, and worksites to facilitate work. * May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $155,000-$210,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability insurances. DZYNE provides paid time off and paid holidays. Additionally, DZYNE offers a 401K plan with an employer match. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. Pay Range: $155,000 - $210,000 per year

Job Description At Turion Space, we're building spacecraft to secure Earth and expand humanity's reach beyond it. As a Principal Spacecraft Mechanism Design Engineer, you will conceive, design, and implement new complex electromechanical spacecraft mechanisms. This is a unique role that will rely on your creativity, experience, and ambition to create critical hardware as the missions increase in complexity. You'll brainstorm concepts and solutions and generate detailed specifications & drawings and analyze static and dynamic structures to quantify performance. This is a full-time, exempt position based at our Irvine, California headquarters. Key Responsibilities Design and Development: Conceive, develop and design precision electromechanical systems for the extreme conditions encountered in space environments. Ensure designs meet mission requirements and industry standards. Leadership: Provide ongoing training and mentorship to junior engineers. Integration: Work with engineering teams to integrate mechanical systems into spacecraft and satellite platforms. Ensure compatibility with electrical, thermal, and software systems. Testing and Validation: Create and execute test plans for mechanical systems. Perform performance and reliability testing to validate system functionality and compliance with specifications. Problem-Solving: Address and resolve technical issues related to mechanical systems. Troubleshoot problems and implement corrective actions as needed. Documentation: Prepare and maintain accurate documentation, including design specifications, test reports, and technical manuals. Ensure all documentation meets company and industry standards. Collaboration: Collaborate with cross-functional teams, including electrical engineers, software engineers, and mission planners, to address and resolve integration and performance issues. Required Qualifications Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. 15+ years of experience in Mechanical Engineering, with experience in designing and developing high precision electromechanical systems for extreme environments. Knowledge of mechanical system design, structural analysis, kinematics, dynamics, electric motors, actuators, and controls. Proficiency with engineering tools and software for design and simulation (e.g., SolidWorks). Experience with 3D CAD, 2D drafting, GD&T, and tolerance analysis. Strong analytical and problem-solving skills, with the ability to troubleshoot and resolve technical issues. Effective verbal and written communication skills, with the ability to present technical information clearly and collaborate with team members. Must be able to obtain a Secret and/or a TS/SCI clearance. Required Qualifications Master's degree in mechanical engineering or a related field. 15+ years of experience in precision machine design. Experience with spacecraft and satellite systems, including an in-depth understanding of the unique requirements and challenges associated with mechanical systems for space missions. Expertise in mechanical systems design and integration techniques as applied to motors, electronic components, bearings, gears, power screws, springs, clutches, brakes, materials, lubrication, and coating selection. Familiarity with high-stress materials, thermal control systems, and space-qualified components. Demonstrated ability to contribute to innovative mechanical system designs and improvements. Advanced, hands-on skills with machine tools and various fabrication techniques. Principal Spacecraft Mechanism Design Engineer/Principal Mechanical Engineer Salary: $175,000 - $250,000 USD ITAR Requirements: This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: We offer a comprehensive compensation and benefits package designed to support the well-being and professional growth of our employees. In addition to a competitive base salary and company stock, determined by factors such as job-related knowledge, education, skills, experience, and market demand, full-time employees are eligible for: Equity: Receive equity in Turion Space, letting you benefit from the company's success Health Insurance: Comprehensive medical, dental, and vision coverage for employees and their dependents. Retirement Plans: Access to a 401(k) plan to help you plan for your future. Paid Time Off: Generous vacation days, personal days, sick days, and holidays to ensure you have time to recharge. Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth. Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment. We are dedicated to providing a supportive and enriching environment for our team members, recognizing that our collective success is built upon the well-being and satisfaction of each individual. Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Compensation Range: $175K - $250K

We are a large, growing Mechanical Contractor that works on many of CA's biggest and best projects. We are currently hiring a Design/Engineer to join our team. This is a permanent position offering a generous salary and benefits package as well as career growth opportunities. This is a fun and challenging position where you will have an opportunity to build relationships with our clients and be involved with Engineering, Design, and Estimating. Responsibilities: • Work closely with different internal departments on upcoming projects • Communicate directly with general contractors and owners • Review Design-Engineering Drawings, and meet with Estimators and Project Managers • Look for opportunities in Value-Engineering for our current and upcoming projects Requirements: • 5+ years of Engineering and Design experience working on large commercial hvac and plumbing projects in California • Familiar with California's building codes, Title 24, LEED and OSHPD requirements • Experience working with Design, Engineering and Coordination Software such as AutoCAD, MEP, Revit, Navisworks, BlueBeam, Carrier HAP, EnergyPro, Trane Trace 700 • Bachelors in Mechanical Engineering • EIT or PE License • Stable work-history

On site M-Fri 7-3: 30PM About Client: Client is one of the largest global medical technology companies in the world and is advancing the world of health by improving medical discovery, diagnostics, and the delivery of care. Client supports the heroes on the frontlines of health care by developing innovative technology, services and solutions that help advance both clinical therapy for patients and clinical process for health care providers. Client and its 75, 000 employees have a passion and commitment to help improve patient outcomes, improve the safety and efficiency of clinicians'care delivery process, enable laboratory scientists to better diagnose disease and advance researchers'capabilities to develop the next generation of diagnostics and therapeutics. Client has a presence in virtually every country and partners with organizations around the world to address some of the most challenging global health issues. By working in close collaboration with customers, Client can help enhance outcomes, lower costs, increase efficiencies, improve safety and expand access to health care. Job Description Summary: We are seeking a Product Development Tech for our Brea, CA facility. This person contributes to the completion of routine technical tasks and develops solutions to routine technical problems of specified scope. Their contacts are primarily with immediate supervisor, project leaders, and other professionals in the unit. Duties and Responsibilities: •Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes. Produces engineering document, reports, and drawings (flow charts, block diagrams and schematics) •Prepares reports and summaries, including quantitative analysis •Provides completion of technical tasks. •Provides technical support to engineers on a variety of technical tasks. •Helps scope equipment for use and complete qualifications •Works with team to on general lab functions;including calibration, implementation of safety procedures, and routine equipment maintenance •Notifies manager or team lead upon recognition of factors that may affect project •Helps develop prototype processes and test set-ups •Executes designed test protocol and conducts testing •Effectively documents and communicates test results •Handles test samples and chemicals used for conditioning and testing Requirements: Minimum Requirement: Minimum education requirement is high school diploma, experience in a lab environment (corporate or school) or technician experience in a regulated environment for a minimum of 6 years, experience following written procedures and working collaboratively with a team Preferred requirement: Bachelor of Science in a technical area and at least 1 year of experience in a laboratory/R&D setting following written procedures and working collaboratively with a team. Preferred Qualifications and Experience: •Ability to understand and perform designed test procedures •The ability to work effectively in a cross functional group and communicate effectively with the lab team and extended team members •Develops solutions to routine technical problems of limited scope •Proficiency in personal computers •Ability to train lower-level technicians

Our client is looking for a Mechanical Design Engineer to join their team to research and develop projects associated with the design and development of new products, models, or mechanisms and to investigate and resolve technical problems involving product performance. Key Responsibilities: Design complex aircraft components and systems to fulfill requirements from the conception through preparation of sales drawings, details, and parts lists, continuing through quality testing and production. Prepare complete technical proposals, design layout drawings and perform product designs. Develop and perform design validation and qualification tests per specifications. Discuss and consult with sales staff or customers on product requirements and specifications where design or manufacturing problems are involved. Coordinate the creation, development, design, and improvement of company products in conformance with established programs and objectives. Provide engineering advice and assistance to other departments as required. Must be able to work at an ITAR facility. Experience/Education:Minimum of two years design experience in mechanical and electro-mechanical aircraft components and systems. Skills/Aptitudes: Proficiency in SolidWorks, good project management skills, ability to interface effectively with customers and with individuals at all levels of the organization. Excellent communication skills. Physical & Work Environment Occasional standing, walking, sitting, climbing stairs, and light lifting (up to 20 lbs). Office environment with moderate noise; factory floor located in the same building with some exposure to noise and fumes. Occasional travel to customers or suppliers. Heavy computer-based work. $45-$50/hour DOE Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performance this job classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required for this position.

The Mechanical Design Engineer's responsibility is to work with customers to design components and assemblies for use in the medical device industry, as well as assist in process development and validation/qualification activities. The Mechanical Design Engineer is also responsible for designing mold tooling and production fixtures, as well as planning and documenting initial product builds to meet customer and regulatory requirements. Essential Functions Provide engineering feasibility and propose concepts to customers during the product development stage. Design and review injection-molded / over-molded components, mechanical assemblies, and interconnects for the medical device industry. Work with team members to ensure specification compliance of designs and system performance through design verification and qualification. Hands-on development of processes and creation of manufacturing documentation. Coordinate mold tooling and fixture design/manufacturing. Participate in part/assembly design reviews, as well as tooling design reviews, both internally and externally with suppliers and customers. Use engineering changes to develop, review, and release required documentation within ClearPath Medical's QMS framework. Initiate and manage prototype/engineering builds for use in pre-qualification and verification activities. Identify the root cause of problems found, develop solutions, and implement changes to address issues as they arise. Meet and understand all program timing requirements. Become familiar with Gannt charts as a tool to meet all project deliverables. Set up equipment such as molding machines, wire/cable cutting and stripping machines, and other cable assembly processing tools. Work from schematics, customer specifications, diagrams, written and verbal descriptions. Seek opportunities to improve processes. This may include areas such as project management, design, and assembly methods. Coordinate with internal resources to propose solutions and support implementation. Follow all employee guidelines and Quality System requirements as defined by ClearPath Medical's practices, policies, and Standard Operating Procedures to ensure customer and FDA requirements are met. Perform other duties as assigned. Must comply with all safety requirements. Required Education Required: Bachelor's degree and experience (2+ years) in a relevant medical device manufacturing industry. Required Skills Proficient in 2D and 3D CAD (Solidworks, AutoCAD, etc.) A firm understanding of engineering principles as applied to part, assembly, and tooling design Highly organized, detail-oriented, and able to multitask. Ability to work independently. Makes and fulfills commitments; meets deadlines and accepts responsibility for their actions. Adjust quickly and effectively to changing conditions and demands. Good comprehension of Manufacturing/Enterprise Resource Planning systems. Proficient in MS Office: Word, Excel, Outlook Develop a firm understanding of the project development process, associated terminology, and quality system requirements. Excellent attendance and a positive attitude. Good written and oral communication skills; must have the ability to communicate effectively and project a professional image when giving and taking information in writing and in person.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. #LI-TS1 ATI is seeking to hire a Design Engineering Intern for our Summer 2026 Internship Program. This position will be based in Irvine, CA and will run from June to August 2026. Relocation and housing assistance is available for the summer. Our Internship Program is designed to provide a rewarding experience and the features of ATI's Internship Program include: Experiential Learning: Hands on work assignments and projects related to your career field of interest Professional Development: Curriculum designed to develop your business acumen and professional skills Professional Networking: Planned events meant to give you informal networking opportunities with other interns and employees As an intern at ATI, you'll gain hands-on experience, learn from experts, and collaborate with teams that do truly exceptional things. The projects and skills outlined below will be guided and directed by an established ATI-Professional in your field of interest. What You'll Do Work closely with our engineering team to support ongoing projects Obtain aerospace manufacturing experience through the assistance of the engineering team Perform other engineering duties as assigned. What You'll Gain Experience in the aerospace industry Experience working in forging environment Lean manufacturing experience

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. #LI-TS1 ATI is seeking to hire a Design Engineering Intern for our Summer 2026 Internship Program. This position will be based in Irvine, CA and will run from June to August 2026. Relocation and housing assistance is available for the summer. Our Internship Program is designed to provide a rewarding experience and the features of ATI's Internship Program include: Experiential Learning: Hands on work assignments and projects related to your career field of interest Professional Development: Curriculum designed to develop your business acumen and professional skills Professional Networking: Planned events meant to give you informal networking opportunities with other interns and employees As an intern at ATI, you'll gain hands-on experience, learn from experts, and collaborate with teams that do truly exceptional things. The projects and skills outlined below will be guided and directed by an established ATI-Professional in your field of interest. What You'll Do Work closely with our engineering team to support ongoing projects Obtain aerospace manufacturing experience through the assistance of the engineering team Perform other engineering duties as assigned. What You'll Gain Experience in the aerospace industry Experience working in forging environment Lean manufacturing experience

Job DescriptionSalary: $25/Hourly Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

As a Design Engineering Intern, you will learn lateral frame design and analysis from the best lateral system designers in the business and be involved in all phases of a structure's creation, from initial layout to topping out. You will assist other engineers with steel shop drawing review and lateral frame design using a whole range of structural modeling packages including RAM, ETABS, SAP, RISA, and others. You will have the opportunity to learn various codes such as the IBC & CBC building codes, the AWS Structural Welding Code, and the AISC Manual of Steel Construction. You will also learn how to optimize lateral frames using steel moment frames, shear walls, and braced frames. Our program is a paid, 12-week program that will run from Monday, May 18th through Friday, August 7th. At MiTek, we embrace a hybrid work model that encourages innovation, collaboration, and connection. For internships that outside your current geographic location, we offer a $6,000 Intern Stipend to help cover your temporary housing and travel for the duration of the program Job Responsibilities & Requirements During the internship you will: Obtain professional development to grow your real-world skills that support your academic coursework. Collaborate and innovate in a supportive work environment Gain industry insights from experienced mentors Create positive change in the building industry and community Build your professional network Contribute to meaningful work alongside MiTek mentors to gain greater skills in your field Learn to look at problems from different perspectives and create innovative solutions Experience the importance of working in a diverse, equitable, and inclusive workplace Essential Functions Exposed to design, analysis, modeling, (e.g. classroom projects) Motivated and eager to learn what it takes to be a great structural engineer including a strong desire to really understand building behaviors, as well as understand the applicable building codes and computer programs used in the design & analysis of steel frame buildings Excellent communication and is very-well organized Enjoys being helpful to others Competent in MS Office products Manage own tasks and project related tasks while recognizing the relationship between individual work and the project as a whole Responsible for self and keeping on tasks and priorities Qualifications Pursuing a bachelor's degree in an accredited college degree program in Civil Engineering with Structural emphasis; ability to convert to full-time hire at the end of program Cumulative grade point average of 3.0 or higher; enrolled in senior year at time of program start. Familiarity with drafting/drawing standards is a plus Microsoft Office - Microsoft Word, Excel, Access, PowerPoint, etc. MiTek is a platform innovator and enabler that exists to transform the building industry with better building solutions. In 1955, MiTek transformed residential construction with the invention of the Gang-Nail plate and a digital platform that provided an affordable and scalable way to manufacture wood trusses. Today, MiTek delivers software, services, engineered products, and automated solutions that enable the building industry to improve efficiencies by optimizing the balance between off-site and on-site. With nearly 5,600 team members worldwide, MiTek collaborates across the building industry to enable and accelerate transformational breakthroughs in design and construction to transform the way the industry designs, makes, and builds. As a Berkshire Hathaway (NYSE: BRK-A, NYSE: BRK-B) company since 2001, MiTek has a record of continuous growth and innovation. MiTek is an E-Verify and Drug and Tobacco-Free Workplace. We are an equal opportunity employer; and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, ethnicity, physical or mental disability, sex (including pregnancy, sexual orientation, gender identity or expression, or transgender status), age (40 and over), genetic information (including family medical history), veteran status, or any other protected characteristic. For accommodation to assist with completing this application, please contact Human Resources at ***************. ***********

The City of Santa Ana is looking for individuals who are results-oriented, possess great attitude, demonstrate creativity and innovation, work efficiently, show a record of success and have a passion for public service. Having highly talented employees provides the best service to our community. This is a part-time internship position. The incumbent will work an average of 19 hours per week. Work schedule is to be determined. This recruitment is open until further notice and can close at any time and without notice. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. Development: Under direction of Engineering staff: Serves residents, contractors, developers, utility companies and other constituents at the Public Works Agency counter; Prepares and modifies cost estimate spreadsheets, basic exhibits and presentations; conducts data research and field investigations; Receives and distributes plan submittals; Issues construction, transportation, utility, and other permits; Reviews site plans for basic private developments; Reviews building plans to calculate development impact fees; Prepares correspondence to permit applicants with status of plan reviews and permit issuance; Performs a variety of general office tasks; and performs other related functions as assigned. Traffic: Assisting engineers in traffic engineering field investigations for existing conditions and proposed projects; conducting various engineering and warrant studies, researching project records, files, and plans; preparing/modifying plans using Microstation or manual drafting; using Microsoft Office PowerPoint, Excel, Word, Access, or other tools and databases to prepare presentation materials (maps, charts, spreadsheets, etc.); data entry; and placing and retrieving radar trailers. Additional job activities may include: conducting/evaluating speed studies, pedestrian, and vehicular counts, updating records, reviewing collision data, conducting parking surveys, issuing business/resident notices, making copies, filing, working with the public, and/or work with our signal operations team and equipment; other miscellaneous duties as assigned. In Signal Operations, additional functions include assisting engineers in operating Traffic Management Center; maintaining local area computer network; investigating traffic signal operations and complaints; maintaining traffic signal equipment, timing, and maintenance records; designing traffic signals, closed-circuit television, communication system, and other advanced traffic signal system elements; updating traffic signal plans manually or using CAD. Water Resources: Under the direction of Engineering staff, assists in the collection of field data; generates technical data, organizes documents, and coordinates data transmission to others; conducts manufacture website surveys for engineering drawings and equipment documentation; scans, records, maintains and organizes directories; updates and creates engineering drawings utilizing MicroStation; assists with the preparation and distribution of reports and documents; processes correspondence and material requisitions; performs other functions as assigned. CIP Engineering: Assignments are made to support the design and/or construction phase of projects. Design: In the design phase and under the direction of Engineering staff, the intern assists with the preparation of engineering drawings and estimates; prepares and modifies spreadsheets, project displays, and various reports; conducts data research, field investigations, and responds to the public and other agencies; performs a variety of general office tasks; and performs other related functions as assigned. Construction: In the construction phase and under the direction of Engineering staff, assist with the construction management of projects under the City's capital improvement program. Projects include construction of water, sewer, and storm drain lines, traffic signals, buildings, parks, street, sidewalk, drainage improvements, and other public facilities. Daily activities include spreadsheets, data research, correspondence, field investigations, preparing and distributing reports, responding to citizen and City agencies' inquiries, performing a variety of general office tasks, and working in the field assisting construction inspectors and survey crews. Additional responsibilities include assisting engineering staff during preconstruction and postconstruction activities. CHARACTERISTICS OF SUCCESSFUL PERFORMERS Candidates shall have a strong interest in engineering; be at ease in dealing with the public and handling complaints from residents with tact and diplomacy; be detail-oriented, organized, have good time-management skills within a vibrant work environment and seek answers should none be obvious. Candidates must be flexible, have good verbal and written communication skills, computer skills and work well with others and with minimal supervision. * Traffic: Must be currently enrolled in an UNDERGRADUATE Civil, Electrical, or Pre-Engineering curriculum with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred). Not open to Graduate/Post-Graduate students. * Development/Water Resources: Must be currently enrolled in an UNDERGRADUATE Civil/Environmental/Mechanical or Pre-Engineering Program with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred.) Not open to Graduate/Post-Graduate students * CIP Engineering: Must be currently enrolled in an UNDERGRADUATE Civil Engineering or Construction Management Program with a good standing of a current GPA of 2.50 or higher (Sophomore and Junior level is preferred). Not open to Graduate/Post-Graduate students. * Must have ample knowledge of computer software such as AutoCAD and/or Microstation and Microsoft Office applications, as well as the ability to work comfortably in a Windows environment. * Possession and retention of an appropriate valid driver's license is a condition of continued employment in this classification. * Bilingual fluency in English and Spanish is preferred but not required. Application, supplemental questionnaire, and required documents must be submitted online. Click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. The Human Resources and Public Works Department will review all applications and documents submitted. Those candidates who possess the most pertinent qualifications will be invited for an oral interview by the hiring agency. If you have any questions about the job duties assigned to the Development Division, please contact Yvonne Soto at **************. If you have any questions about the job duties assigned to the Traffic Division, please call Victor Chaidez at **************. If you have questions about the job duties assigned to the Design Division, please contact David Ramirez at **************. If you have any questions about the job duties assigned to the Water Resources Division, please contact Jaime Arias **************. If you have any questions about the job duties assigned to the Construction Division, please call Ed Torres at **************. Candidates given a conditional job offer will be required to undergo and pass a medical exam and background records check. The City of Santa Ana is an equal opportunity employer. If you consider yourself a person with a disability, you may contact us regarding providing reasonable accommodation.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe, and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represents a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Engineering Intern Role Overview: As a member of the HPA team, the Intern will work alongside experienced engineers providing mentoring, guidance, and introductions to colleagues. This Internship with MACOM will help the Intern to gain valuable work experience in a key discipline, build professional relationships, and take ownership of a business-critical project. During the 12 weeks each Intern will: > Be given an individual and well-defined project with set outcome goals > Gain hands on experience > Receive excellent training and ongoing supervision > Be invited to attend an intern webinar series > Attend networking/social events > Attend and present at Poster Session about each Interns project successes and pitfalls > Receive formal, written feedback Requirements: Currently enrolled in a Master's program, or Ph.D (preferred) in Electrical Engineering. Prerequisite Skills and Experience: * BSEE already acquired * Electrical Engineering / Digital Communications (Signal & System Engineering) / Electrical and Computer Engineering * Strong fundamentals with analog circuits (RLC networks) * Exposure to Electro-Magnetics, with hands-on experience using tools like HFSS * Experience with circuit simulators such as ADS Additional Desirable Skills: * MSEE already acquired * Great communication skills, written and verbal * Coding experience: Matlab, C++ EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Anaheim, California, United States Throughout our worldwide network of experts, clients and communities, we are renowned for our leadership in fire protection engineering - a legacy of responsibility we have proudly upheld since 1939. Today, our expertise extends broadly across closely related security and risk-based fields - from accessibility consulting and risk analysis to process safety, forensic investigations, security risk consulting, emergency management, digital innovation and more. Our engineers and consultants collaborate to solve complex safety and security challenges, ensuring our clients can protect what matters most. For over 80 years, we have helped mitigate risks that threaten lives, property and reputations. Through technology, expertise and industry-leading research, we remain dedicated to our purpose of making our world safe, secure and resilient. At Jensen Hughes, we believe that creating and sustaining a culture of trust, integrity and professional growth starts with putting our people first. Our employees are our greatest strength, and we value the unique perspectives and talents they bring to our organization. Our wide range of Global Employee Networks connect people from across the organization, supporting career development and providing forums for individuals to share experiences on topics they're passionate about. Together, we are cultivating a connected culture where everyone has the opportunity to learn, grow and succeed together. Jensen Hughes is looking to hire college students for internships within our Fire Protection Engineering discipline across our locations throughout the United States. Please refer to our full list of office locations here (****************************************************** . **Responsibilities:** + Performs a variety of technical, both routine and moderately complex tasks that provide familiarity with programs, staff, and operating procedures. + Collaborate and work under the direction of engineers to support Code Consulting, Fire Protection engineering and/or Security design efforts. + Performs developmental assignments involving the application of standard engineering techniques, procedures, and criteria in carrying out routine engineering tasks under close supervision. + Applies prescribed method to complete limited and specific portions of the broader assignment of an experienced engineer, adjusts and correlates data, recognizes discrepancies in results and follows operations through a series of related detailed steps or processes. **Qualifications:** + Working towards a Bachelor's or Master's degree in Fire Protection, Mechanical, Chemical, or other related engineering fields + At least two years of undergraduate schooling + Responsible self-starter with problem solving and reasoning skills + Demonstrate effective written and oral communication skills to write reports, business correspondence, presentations and procedure manuals, and to respond to questions from groups of managers, clients, and the public + Passion for advancing the science of making our world safe, secure and resilient and exceeding our client expectations \#LI-KS1 **_Jensen Hughes is an Equal Opportunity Employer. Qualified candidates will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status._** At Jensen Hughes, we embrace innovation and understand that people are increasingly using artificial intelligence (AI) tools like ChatGPT and other generative platforms to learn, prepare and communicate. We have provided some guidelines regarding the responsible use of AI in the recruitment process. Please click **here (****************************************************************************************************** to review. The security of your personal data is important to us. Jensen Hughes has implemented reasonable physical, technical, and administrative security standards to protect personal data from loss, misuse, alteration, or destruction. We protect your personal data against unauthorized access, use, or disclosure, using security technologies and procedures, such as encryption and limited access. Only authorized individuals may access your personal data for the purpose for which it was collected, and these individuals receive training about the importance of protecting personal data. Jensen Hughes is committed to compliance with all relevant data privacy laws in all areas where we do business, including, but not limited to, the GDPR and the CCPA. Additionally, our service providers are contractually bound to maintain the confidentiality of personal data and may not use the information for any unauthorized purpose. *Policy on use of 3rd party recruiting agency for direct placements Jensen Hughes will occasionally augment a recruiting search through agencies for certain positions when business conditions warrant. Jensen Hughes will not accept resumes, inquiries or proposals from recruiting agencies as an acceptable method to consider a candidate. 3rd party recruiting agencies must sign a standard Jensen Hughes agreement after being evaluated and accepted by a Human Resources or Talent Acquisition manager, or member of the talent acquisition team. Hiring managers and employees of Jensen Hughes are not authorized to accept resumes, engage in fee-based searches through recruiting firms or sign a search agreement. Please note this policy does not apply to "staffing firms" or firms that are involved with hiring temporary staff. Any recruiting agency interested in being considered may contact our recruiting team at jensenhughesrecruiting.com. Create a Job Alert Interested in building your career at Jensen Hughes? Get future opportunities sent straight to your email.

Looking to jumpstart your career at a company that offers real opportunities to flourish? Look no further than Pacific Life. We're investing in bright, agile new talent with fresh perspectives to help us innovate and build meaningful relationships for years to come. We are currently looking to add Data Engineering Interns to our team for Summer 2026 at a Fortune 500 company in the financial services industry. As a Data Engineering Intern, you will play a key role in developing a more data driven culture at Pacific Life. Interns will use industry leading tools such as Python, R, Sales Force, and Alteryx to help solve real world business problems. They will be paired with various business units (such as predictive analytics, actuarial, IT, customer experience, etc.) to provide technical expertise while learning more about the business. If you are passionate about data, you're exactly who we're seeking! What You'll Do Participate in evaluating business needs, and clarify requirements, data, processes, and systems for complex technology projects. Mine large and complex datasets for insights and converting the insights into product features. Collaborate with analysts and other engineers to formulate innovative data engineering solutions. Build creative solutions to complex business problems that provide functionality, speed, scalability, and reliability required by the business to use data effectively. Work closely with other teams to assist with integration design, development & implementation. Communicate complex concepts and results in a clear and effective manner. Factors for Success Currently enrolled in a Bachelor's or Master's Degree in Computer Science, Data Science, Software Engineering, Information Technology, Mathematics, Economics, Business, Machine Learning, Applied Mathematics, Statistics, or another quantitative Field. Strong analytical, problem solving, and organizational skills Excellent communication skills, the ability to multitask, prioritize work, take initiative, and be self-sufficient with responsibilities Ability to work well with others as a team and independently Desire for learning new technologies and analytic tools; as well as modeling and quantitative techniques Experience in programming (Python or R preferred) Experience with data modeling Familiarity with data science or data analytics tools and platforms such as: Alteryx, AWS data science and analytics related services, SAS platform, Tableau, RDBMS such as MSQL, Postgres, other DBMS, e.g NoSQL experience Demonstrated skills of machine learning, data modeling, used in data science or other applied technology skills such as database engineering, application development, cloud engineering and user experience design Display a true passion and intellectual curiosity for data science via coursework, external activities such as Kaggle contests or hackathons, or some combination of both The base pay rate for this position is $25.00 per hour for undergraduates and $30.00 per hour for advanced degrees. Relocation stipend available if residence is outside of 50 mile radius from office location. Please Note: Interviews for this program will begin in January 2026. More reasons to join: At Pacific Life, the work we do matters. We work passionately each day to drive our company forward while enjoying job security, flexible scheduling, and great opportunities for career growth. If you're seeking a thriving career doing the type of meaningful work that's all too rare at a Fortune 500 Company, Pacific Life is the place for you. If you are a self-starter who appreciates creativity and individuality in your colleagues - even better. We look forward to receiving your application. You belong at Pacific Life At Pacific Life, we believe you belong. We foster a culture of belonging, a space where all employees are empowered to be authentic. We embrace and celebrate diversity, create a culture of equity and inclusion, and value and respect every employee. How We Help You Succeed: Our Summer Internship Program has become Pacific Life's talent pipeline for full time early career opportunities. The University Relations team ensures each intern has a well-rounded positive experience to help them reach their career goals. The Summer Program includes: Professional Development Executive Mentorship Program Collaborative Environment Real World Work Social Events Training and Education Networking and Exposure to Leadership EEO Statement: Pacific Life Insurance Company is an Equal Opportunity /Affirmative Action Employer, M/F/D/V. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact a Human Resources Representative at Pacific Life Insurance Company.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? At GHD we are looking for a new Construction Engineering Intern to join the Construction Phase team at our Irvine, Santa Rosa or Phoenix office. In this role you will supervise the daily execution of work at construction sites to meet quality and timeliness requirements. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: * External Communications: Use the external communications system to access and supply specific information. * Construction Management: Provide operational support in a construction project by performing a range of routine activities using existing systems and protocols. * Health, Safety, and Environment: Follow the organization's health, safety, and environment (HSE) policies, procedures, and mandatory instructions to identify and mitigate risks and to safeguard the environment and the well-being of self and others. * Work Scheduling and Allocation: Design own monthly schedule and, if necessary, assign work to others in order to speed up office workflow and ensure high-priority tasks get done. * Leadership and Direction: Explain the local action plan, to support team members in their understanding of what needs to be done, and how this relates to the broader business plan and the organization's strategy, mission, and vision; motivate people to achieve local business goals. * Performance Management: Respond to personal objectives and use performance management systems to improve personal performance; or monitor the performance of the team, allocate work and review completion, take appropriate corrective action to ensure timeliness and quality, and contribute to formal individual performance management and appraisal. * Organizational Capability Building: Provide instruction and informal advice to less experienced colleagues within the team to develop their skills. * Quality Assurance: Conduct complex analyses, quality tests, and inspections that require a high level of independent judgment. * Operational Compliance: Develop knowledge and understanding of the organization's policies and procedures and of relevant regulatory codes and codes of conduct to ensure own work adheres to those standards. Obtain authorization from a supervisor or manager for any exceptions from mandatory procedure. What you will bring to the Team Education * Currently enrolled in construction engineering or equivalent Bachelor's or Master's degree program Experience * General Experience: No experience required. #LI-AL1 Salary Range: $20,00 - $26,00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Irvine, CA ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills + Ability to contribute and work well on a team + Proficiency in Microsoft Excel, Word, and Outlook + Working knowledge of AutoCAD + Working knowledge in Synchro is a plus + Problem-solving and decision-making skills + Pursuing a degree in civil engineering \#LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range $25-$28USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Come build your future with us. Gain practical work experience. Sharpen your skills. Develop and grow your career. We are now accepting applications for our 2026 Summer Internship program! Applications are being accepted for this program until December 12, 2025. What began as one of Southern California's original lath and plaster companies has grown into one of the wall and ceiling industry's leading full service, design-assist, specialty finish and theming contractors that continuously receives acclaim for its projects, safety focus, and employee-oriented culture. We started with lath and plaster work. We added drywall. Today, we use some of the most advanced technologies to help model, plan, and design projects throughout the Western U.S. Come join our team and be mentored by top professionals at The Raymond Group (an award-winning full service, design-assist, specialty finish and theming contractor) while working alongside world-class industry experts in this 10-week structured paid summer internship program which will run from the end of May to approximately mid-August 2026. The program will expose a participant to various areas of Raymond's operations allowing an individual to gain tactical, real-world construction experience. Individuals selected for the program will spend time supporting various business units in the company including project management, field operations, estimating, engineering, safety, and/or accounting. Individuals selected for the program will work directly with a project team and have a mentor personally assigned who will act as a coach, provide regular constructive feedback, and be available to answer any questions. We provide comprehensive technical and on-the-job training. The Project Engineer Intern role is a full-time, fully paid, temporary position at our Orange office which has been awarded Top Workplace status. This individual will work in both the field as well as the office and gain invaluable experiences by applying the knowledge and skills learned during the program. Responsibilities: Assist with the execution and support of Raymond projects Participate in project management meetings Assist project management in coordinating the activities of a project to ensure cost, schedule, safety, and quality standards are met Conduct a contract review Assist in the development and maintenance of construction project schedules Participate in process submittals and RFI reviews Take part in safety and quality control walks Participate in project take-off and/or project close-out Create purchase orders and change orders Required Education and Experience: High school diploma or its equivalent Actively pursuing a Construction Management or Engineering degree at an accredited university OR possess a minimum of two (2) years of experience in construction or a related field Possess strong verbal, written, analytical, organizational, and interpersonal skills Can work independently and as part of a team Adaptable and interested in working on multiple, different assignments Able to effectively interact with all levels of personnel and management Proficient in Microsoft Office software (Excel, Word, Outlook, and PowerPoint) Preferred Experience: Prior work experience in the field on a commercial construction site OSHA 10-hour training or equivalent safety training Able to read blueprints EEO/Vet/Disabled. Certificates/Security Clearances/Other This is a non-exempt position. The wage rate is $25.00 per hour. Additional Qualifications/Responsibilities Applications are being accepted until December 12, 2025.