Mechanical engineering internship jobs in Hemet, CA - 161 jobs

Classification: Internal HCLTech is looking for a highly talented and self- motivated Mechanical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Mechanical Design Engineer Job ID: 51186 Position Type: Full-time with HCLTech Location: Foot Hill Ranch, CA Role/Responsibilities Key Skills: Creo, NPD, Concept to production, DFA, DFM, BOM, MS Office. Key Purpose of the Job: Mechanical Engineering is responsible for developing and designing hardware components for the Camera systems. To design and develop plastic, machined sheet metal parts, assemblies, and detail drawings, and proficient in CREO to develop concepts and CAD models as per design intent. Should be able to independently interact with design and cross functional team for design clarifications. Responsible for planning and executing design activities as per client timelines. Mandatory Skills and Functional Capabilities: Experience in design & development of Electromechanical system/subsystem and creation of conceptual designs in Creo. Proficient in Creo CAD software (Creating 3D models, plastic, Machined, Sheet Metal, 2D drawing, Surface modelling, and Assembly) Hands on experience in parts and Plastic design and manufacturing. Experience in design & development of Electromechanical products and subsystems. Strong knowledge in manufacturability considerations for Plastic, Sheetmetal, Machined and structural Components Design of MCAD PCB, EMN/EMP verification, board outline definition EMN/EMP verification Identifying the suitable material, apply DFM/DFA concepts in design and Familiar with latest engineering design and methods, tools, and processes. Experience with standard NPI / NPD process: Ideation to production Hands on experience in Teamcenter PDM / PLM for managing lifecycle of the components, managing ECO / ECR, creating EBOM. Create & review engineering drawings, understand GD&T principles, tolerance stack-up analysis, material selection & selection of manufacturing processes Disciplined team worker, ability to work independently, Result oriented team player. Ability to present and articulate ideas to key stakeholders and leadership team. Excellent communication skills and Positive ‘can do' attitude. Quality mindset in design and documentation Pay and Benefits Pay Range Minimum: $39.71 per hour Pay Range Maximum: $ 45.13 per hour HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Definition will be open until filled To perform professional and technical engineering work in an assigned area such as plan and development review, contract administration and design; and to provide technical staff assistance to higher level engineering staff. Position Snapshot/A Day in the Life: This Associate Engineer position will be within the Traffic Division of the Public Works/Engineering Department. With a team of 11 (7 of whom are primarily responsible for signal operations and maintenance), we are responsible for overseeing the City's transportation system, including supporting Capital Improvements Projects, Land Development projects, Street Maintenance, Planning, and others. Under the direction of a Senior Engineer or City Traffic Engineer, you will primarily be responsible for reviewing private development and capital improvement project related traffic studies, identifying impacts and deficiencies, and determining the most appropriate improvements and design features needed. Other day-to-day duties will also involve reviewing and preparing signing/striping plans and traffic control plans, investigating and responding to concerns from the general public, and participating in long-range planning activities. You may also be asked to help work on special projects and grant pursuits, preparing staff reports, participating in interagency coordination efforts, preparing RFP's/RFQ's, reviewing and processing proposals/contracts/traffic plans, and conducting various meetings. Distinguishing Characteristics: This is the journey level class within the Engineering series. Employees within this class are distinguished from the Assistant Civil Engineer by the performance of the full range of duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and may be filled by advancement from the Assistant level. Supervision Received and Exercised: Receives direction from higher level engineering staff and may exercise technical supervision over less experienced staff within the work unit and technical or functional supervision over staff within the Department. Essential Functions The incumbent must have the ability to: Review and check residential and commercial building plans or plans related to structures such as streets, sidewalks, gutters and other off-site construction; check plans for conformance with regulations regarding line, grade, size, elevation and location of structures; check calculations Maintain records of all plans and contract documents. Prepare progress reports on projects under construction; maintain records of changes and field notes. Investigate field problems affecting property owners, contractors and maintenance operations. Coordinate assigned activities with consultants, engineers, developers, contractors, other city departments and divisions, and with outside agencies. Develop plans, specifications and other contract documents. Provide technical and professional engineering support services relative to assigned areas of responsibility. Prepare special engineering studies and reports; perform special assignments on engineering problems as necessary. Plan, prepare and design a variety of engineering projects such as roads, bridges, structures and hydraulics. Calculate the quantity, quality and cost of materials used for various projects. Review engineering calculations of other engineers or engineering technicians. Prepare plans and specifications, maps, deeds and legal descriptions. Review plans for traffic signals, traffic signing, and traffic striping for conformance with City policies and State and Federal requirements. Plan, prepare, and design a variety of engineering projects, such as traffic signals, traffic striping, and traffic signing. Review all permits involving work in public streets; review any and all traffic control plans required due to work in streets. Prepare traffic control plans and requirements. Communicate clearly and concisely, both orally and in writing. Establish and maintain cooperative working relationships with those contacted in the course of work. Perform and other tasks or functions that may be deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS:In the performance of daily activities, this position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, and bending; the ability to push, pull, drag and/or lift up to 25 pounds; normal manual dexterity and hand/eye coordination; repetitive hand and wrist movement using a computer keyboard and mouse; corrected vision to normal range; acute hearing; written and oral communication; use of standard office equipment such as computers, telephones, copiers, calculators and facsimiles; frequent contact with other staff and the public; may be exposed to severe weather conditions such as high wind, rain, and other outside conditions. Experience and Training Guidelines A combination of experience and training that would provide the required knowledge and abilities is qualifying. The incumbent must have the knowledge of: Principles and practices of civil engineering. Methods, materials and techniques used in the construction of public works projects. Modern developments, current literature and sources of information regarding engineering. Principles of advanced mathematics and their application to engineering work. Applicable laws and regulatory codes in assigned area of responsibility. The ideal candidate will have a strong technical background in preparing and reviewing transportation analysis for a range of project scales and being able to interpret the practical implications of the analysis results. They would be familiar with VMT, the current industry trends related to its implementation, and be able to assist the team in managing and updating our Traffic Impact Guidelines. They'll have excellent skills in using Excel and be comfortable working within it to create reliable and flexible tools for day-to-day analysis needs. The Traffic division and the City pursue significant grants and special projects that allow us to grow our infrastructure and capabilities, as well as to implement the best practices in the industry, the ideal candidate would be someone who is knowledgeable about the current trends in the Transportation engineering and planning fields and be able to lead grant pursuit efforts and independently manage such projects along with coordination with stakeholders of competing interests. Experience: One (1) to two (2) years of increasingly responsible experience in civil engineering. Preferred Qualifications At least two (2) years of experience preparing and reviewing transportation impact analyses for a range of project scales and being able to interpret the practical implications of the analysis results. Familiarity with VMT, the current industry trends related to its implementation, and have experience managing and/or updating Traffic Impact Guidelines. Advanced proficiency in Microsoft Excel, including building tools for transportation data analysis. Experience managing transportation projects and coordinating with internal and external stakeholders with competing interests. Experience presenting at public meetings and responding to questions/feedback from elected or appointed officials. Traffic Engineering license. Education: Equivalent to a Bachelor's degree from an accredited college or university with major coursework in civil engineering or a closely related field. Some additional years of experience and specialized training may substitute for some of the educational requirements. License or Certificate: Possession of, and continuously throughout employment, a valid CA Class "C" Driver's License. Supplemental Information Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Do you currently possess a valid California Class "C" Driver's License? Yes No 03 List three LOS based traffic studies that you have worked on, and in three or four sentences identify the general scope, your role in the analysis, and its current status (e.g. undergoing entitlement, approved, constructed, etc.)? 04 List three VMT based traffic studies that you have worked on, and in three or four sentences identify the general scope, your role in the analysis, and its current status (e.g. undergoing entitlement, approved, constructed, etc.)? 05 Have you worked with a project that required VMT mitigation? If yes, in two or three sentences, please describe the impacts and the mitigation selected. 06 Have you prepared and presented at a public hearing, such as a planning commission, technical committee, or city council meeting? Yes No 07 If you answered yes to question #6. Please describe in three or four sentences the meeting setting, the presentation topic, and your role in the presentation. 08 How comfortable are you using Excel? Please describe in three to four sentences a transportation related project where you utilized Excel, mention the purpose, who or what the results/tool was intended for, and the level of complexity. 09 How comfortable are you using Synchro? Please describe in two to three sentences your level of experience with using Synchro. 10 Do you have a TE License? If not, are you planning on achieving licensure as a TE? Are there any other transportation related certifications you possess or are pursuing? Required Question

IPS is hiring a Design - HVAC Mechanical Engineer Intern who will join our industry leading team at our Irvine, CA office location. The Design Intern - Mechanical Engineer is involved in the application of engineering fundamentals and project related services in support of design assignments. This developmental position enables the Designer to learn to apply theoretical knowledge to practical application. KEY ACTIVITIES AND RESPONSIBILITIES * Works with assigned design engineers and drafters to execute design drawings and specifications as required in order to support assigned projects. Ensures code and statute compliance in all projects. * Uses computer aided design technologies to develop sketches, drawings, and construction documents. * Routinely archives and retrieves data from electronic database for support of work. * Researches equipment selection from catalogs under the direction of the Project Designer/Engineer. * Expected to become proficient in the use of a computer for Design and CAD applications. * Maintains a neat and organized work area, which allows efficient access to project information required by other team members. * Keeps Project Designer/Engineer aware of workload and requests work when needed. * Special projects as assigned. Qualifications & Requirements REQUIRED EDUCATION/QUALIFICATIONS /WORK EXPERIENCE * Must be pursuing a Bachelor's Degree in design engineering from an accredited technical institution or college. * Proven time management skills in order to juggle more than one project at a time. * Customer Service experience exhibiting strong oral and written communication skills. CONTEXT AND ENVIRONMENT AND SAFETY * Travel duration, if any, is based on project complexity and location. * This position is a safety sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research or other "non-administrative" areas. About Us About Us IPS-Integrated Project Services is a global leader in developing innovative and cost effective solutions for the engineering, construction, commissioning and qualification of complex pharmaceutical and biotech research and manufacturing facilities. With technical expertise spanning R&D to pilot-scale to large-scale production, our team specializes in the technology, trends and regulatory environment to successfully deliver capital projects and improve operations. For over thirty years, we have applied unique LEAN methodologies throughout the project life cycle, continually finding ways to do things better and more efficiently, delivering higher quality and controlling costs. Headquartered in Blue Bell, PA, IPS is a multi-national company with over 1,500 professionals worldwide and offices in California, Kansas, Maryland, Massachusetts, New Jersey, North Carolina, Pennsylvania, Brazil, Canada, China, Ireland, Singapore, Switzerland, Germany, United Kingdom and four locations in India. Visit our website at ************** Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV and Staffing Services. IPS is an equal opportunity, affirmative action employer of protected veterans (M/F/D/V). Attention Search Firms / Third Party Recruiters: IPS is not seeking assistance or accepting unsolicited resumes from search firms for employment opportunities with IPS. Regardless of past practice, all resumes submitted by search firms to any employee at IPS via-email, the Internet or directly to hiring managers at IPS in any form without a valid written search agreement in place for a specific position will be deemed the sole property of IPS, and no fee will be paid in the event a candidate is hired by IPS as a result of the referral or through other means. REQUIRED EDUCATION/QUALIFICATIONS /WORK EXPERIENCE * Must be pursuing a Bachelor's Degree in design engineering from an accredited technical institution or college. * Proven time management skills in order to juggle more than one project at a time. * Customer Service experience exhibiting strong oral and written communication skills. CONTEXT AND ENVIRONMENT AND SAFETY * Travel duration, if any, is based on project complexity and location. * This position is a safety sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research or other "non-administrative" areas. IPS is hiring a Design - HVAC Mechanical Engineer Intern who will join our industry leading team at our Irvine, CA office location. The Design Intern - Mechanical Engineer is involved in the application of engineering fundamentals and project related services in support of design assignments. This developmental position enables the Designer to learn to apply theoretical knowledge to practical application. KEY ACTIVITIES AND RESPONSIBILITIES * Works with assigned design engineers and drafters to execute design drawings and specifications as required in order to support assigned projects. Ensures code and statute compliance in all projects. * Uses computer aided design technologies to develop sketches, drawings, and construction documents. * Routinely archives and retrieves data from electronic database for support of work. * Researches equipment selection from catalogs under the direction of the Project Designer/Engineer. * Expected to become proficient in the use of a computer for Design and CAD applications. * Maintains a neat and organized work area, which allows efficient access to project information required by other team members. * Keeps Project Designer/Engineer aware of workload and requests work when needed. * Special projects as assigned.

Zymo Research is looking for a dynamic individual to join our Engineering Team! The Mechanical Engineer Intern will support the design and development of plastic sample collection devices within a product development environment. This role is intended for students or recent graduates pursuing a degree in Mechanical Engineering or a related field and provides hands-on experience in CAD design, prototyping, and cross-functional collaboration. Join us in making a meaningful impact! Key Responsibilities Create and modify 3D CAD models and drawings for plastic components using SolidWorks or similar tools Support plastic part design with consideration for manufacturability and assembly Assist with prototype development, evaluation, and design iteration Collaborate with engineering and manufacturing teams to support development activities Maintain accurate design documentation in accordance with internal processes Key Skills and Qualifications Pursuing or recently completed a Bachelor's degree in Mechanical Engineering or related field Proficiency in CAD software Basic understanding of plastic part design principles Strong attention to detail and ability to work in a team environment Preferred Skills Exposure to injection-molded plastic design or rapid prototyping Experience in a product development or regulated environment About Us: Since its inception in 1994, Zymo Research has been proudly serving the scientific community by providing innovative, reliable, and high-quality research tools and products. Whether it's DNA, RNA, epigenetics, microbiomics, protein, or yeast-based research, our philosophy remains the same: To provide the highest quality products in the industry while ensuring they are both simple to use and reliable in their performance. Recognized as a Top Workplace by the Orange County Register in 2021, 2022, and named a Top Workplace USA in 2023, Zymo Research continues to be a vibrant community where employees thrive, feel connected, and are inspired by their work. If you are passionate about contributing to scientific advancement and want to be part of an exceptional team in a dynamic, growing company, we'd love to hear from you! Compensation, Benefits, and Perks: The estimated base compensation range for this position is $20 - $25 an hour at the time of posting. Actual compensation details will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. Zymo Research also offers competitive benefits and perks including: EAP Sessions Paid Sick Leave Complimentary fruit, snacks, and beverages Complimentary catered lunches on Thursdays Complimentary EV Charging Equal Employment Opportunity Employer: Zymo Research welcomes candidates of all backgrounds. These include sex, age, color, race, religion, marital status, national origin, ancestry, sexual orientation, gender, gender identity, gender expression, physical & mental disability, medical condition, genetic information, military and veteran status, or any other protected status as defined by federal, state, or local law. Location: Onsite - Zymo Research HQ - 17062 Murphy Ave., Irvine, CA 92614 Disclaimer: At Zymo, we take the integrity of our hiring process seriously. Please be aware of fraudulent recruitment activities that may use our name to deceive job seekers. We will never ask for payment, sensitive personal information, or financial details during the recruitment process. All legitimate communications will come from an official Zymo or TriNet Hiring email address. If you are contacted by anyone claiming to represent us using a free email service (e.g., Gmail, Yahoo, Hotmail) or asking for payment, please treat this as fraudulent and report it immediately to *******************

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary As the Staff Mechanical Design Engineer, Electronics, you will have a critical technical role guiding and shaping the design, release, and integration of electrical and mechanical components. Specifically, integrating electrical components, PCBA, sensors, and connectors into a mechanical environment of housings, shafts, and bearings. You will work with purchasing to source components and work collaboratively with suppliers to ensure manufacturability at scale. You will develop DFMEAs and DVPRs to ensure robust analytical and physical validation. Responsibilities Lead sensor development of absolute magnetic position sensors and inductive relative position sensors in an actuator Work cross functionally with Electrical Engineering on sensor selection, inductive coil design, target selection, and magnet selection Lead sensor performance characterization for temperature, deflection, tolerance stack ups, current, voltage, etc. Develop detailed CAD drawings and manufacturing instructions Release CAD and drawings of sensor components, including targets, magnets, plastic gears, and other parts Write electromagnetic performance analysis requests Complete tolerance stack ups Complete first principals mechanical and electrical engineering calculations to support designs Write FEA analysis requests for structural FEA Execute and document Analysis Design Verification Plans & Reports (ADVP&R) of sensors and related components Develop and maintain Design Failure Mode and Effects Analyses (DFMEAs) of sensors and related components Coordinate validation and quality assurance activities with contract manufacturer, Tier 1. and Tier 2 suppliers Collaborate across disciplines to advance designs from initial concept through prototyping to mass production. Support hands-on prototype assembly, testing, and component fabrication Qualifications Proficient in CAD tools (CATIA/3DExperience preferred) and PLM systems for component design, including BOM structuring and engineering change control. Strong mechanical engineering foundation, with expertise in materials for sensors Experienced in high-volume manufacturing techniques for sensors, including overmolding Deep understanding of sensor design parameters Proficient in GD&T and tolerance stack-up analysis to ensure reliability Hands-on experience with integration, assembly, testing, and troubleshooting of sensors Pay Disclosure Salary Range for California Based Candidates: $137,800.00 - $172,200.00 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Proficient in CAD tools (CATIA/3DExperience preferred) and PLM systems for component design, including BOM structuring and engineering change control. Strong mechanical engineering foundation, with expertise in materials for sensors Experienced in high-volume manufacturing techniques for sensors, including overmolding Deep understanding of sensor design parameters Proficient in GD&T and tolerance stack-up analysis to ensure reliability Hands-on experience with integration, assembly, testing, and troubleshooting of sensors Lead sensor development of absolute magnetic position sensors and inductive relative position sensors in an actuator Work cross functionally with Electrical Engineering on sensor selection, inductive coil design, target selection, and magnet selection Lead sensor performance characterization for temperature, deflection, tolerance stack ups, current, voltage, etc. Develop detailed CAD drawings and manufacturing instructions Release CAD and drawings of sensor components, including targets, magnets, plastic gears, and other parts Write electromagnetic performance analysis requests Complete tolerance stack ups Complete first principals mechanical and electrical engineering calculations to support designs Write FEA analysis requests for structural FEA Execute and document Analysis Design Verification Plans & Reports (ADVP&R) of sensors and related components Develop and maintain Design Failure Mode and Effects Analyses (DFMEAs) of sensors and related components Coordinate validation and quality assurance activities with contract manufacturer, Tier 1. and Tier 2 suppliers Collaborate across disciplines to advance designs from initial concept through prototyping to mass production. Support hands-on prototype assembly, testing, and component fabrication

StarFish Medical - Irvine, CA (On-Site) StarFish Medical partners with innovators to develop breakthrough medical technologies. Our Irvine team is looking for a mechanical engineer who excels in early-stage product development, someone who enjoys transforming ambiguous ideas into functioning prototypes through rapid iteration, clever mechanisms, hands-on experimentation, and thoughtful engineering If you thrive on concept ideation, feasibility testing, prototyping, and architecting systems from the ground up, this role is designed for you. You will collaborate closely with a multidisciplinary team to explore design options, evaluate technical feasibility, and develop first-generation hardware that lays the foundation for subsequent product development phases. Why You'll Love It Here At the Irvine site, you'll join a small, high-energy team that values ingenuity, curiosity, and practical problem solving. You'll work in a creative environment where your early-stage engineering skills directly impact breakthrough medical technologies. Why This Role Is Different You will spend most of your time: * Generating concepts and architectures * Building and iterating early prototypes * Solving novel, open-ended mechanical problems * Running benchtop experiments to drive design decisions * Exploring methods, mechanisms, and materials using proof-of-principle models If you enjoy the front end of innovation, you'll feel at home here. What You'll Do * Define and refine mechanical requirements through technical investigation and early feasibility work * Lead concept development, mechanism ideation, and architecture-level design * Build benchtop prototypes quickly using CNC machining, sheet metal, 3D printing, compression molding, laser cutting, and other creative fabrication approaches * Conduct feasibility tests, characterize performance, and propose design directions based on experimental evidence * Evaluate materials, mechanical approaches, and design trade-offs early in the product lifecycle * Communicate design intent through sketches, block diagrams, models, and quick CAD concepts * Follow best practices to create robust 3D models and drawings in SolidWorks for early prototypes, assemblies, and evolving system architectures * Maintain revision control of 3D models and drawings using SolidWorks PDM * Collaborate with electrical, firmware, software, human factors, and industrial design teams during concept exploration and development * Work with vendors to produce prototypes and custom components, and to evaluate manufacturability * Transition successful early concepts into structured development for later-stage refinement What You Bring * Bachelor's degree in Mechanical Engineering * 5 to 8 years or more of hands-on mechanical product development experience, including significant early-stage work * Strong proficiency in mechanism design, prototyping, and engineering fundamentals * Demonstrated ability to solve open-ended technical problems with incomplete information * Excellent CAD skills (SolidWorks) applied to conceptual and early-stage design * Breadth of experience with common manufacturing processes such as CNC machining, sheet metal, injection molding, etc. and experience designing parts to be made using these processes * Comfortable communicating evolving design concepts to both technical and non-technical audiences Preferred Qualifications * Experience working on complex electromechanical or mechatronic systems * Hands-on experimentation background (physics, systems modelling, benchtop testing) * Exposure to regulated development (FDA, ISO 13485, ISO 9001, AS9100, etc.) * Consulting experience or work on multiple varied product categories * Experience with FEA for feasibility studies (structural, thermal, or fluid) Salary Base Salary: USD 110,000 - 160,000 annually Base salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Annual variable compensation: Target of 3 -10% of base salary, tied to goal achievement Additional Compensation: Employees are eligible for a profit-sharing program Benefits of working at StarFish Medical: Becoming a part of a group of passionate individuals striving to make a meaningful impact, combined with: * Make a meaningful impact through life-changing medical technologies * Excellent benefits package for you and your family * Profit-sharing program * Monthly all-hands meetings and an open communication culture * Active social committee with events during work and outside hours. Some for individuals, some for families * 401(k) participation * Vacation and sick days Why Join Us? At our Irvine location, you'll join a close-knit team that values initiative, curiosity, and pride in creating and maintaining an outstanding workspace. We'd love to hear from you, especially if you're curious, hands-on and thrive in mechanism design, concept development, and early-stage engineering! Don't meet every single requirement? Studies show that women and people of colour are less likely to apply for jobs unless they meet every qualification. If you're excited about this role but your experience doesn't align perfectly, we still encourage you to apply-you may be just the right fit. StarFish Medical is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide reasonable accommodations upon request throughout the hiring process.

At Turion Space, we're building spacecraft to secure Earth and expand humanity's reach beyond it. As a Principal Spacecraft Mechanism Design Engineer, you will conceive, design, and implement new complex electromechanical spacecraft mechanisms. This is a unique role that will rely on your creativity, experience, and ambition to create critical hardware as the missions increase in complexity. You'll brainstorm concepts and solutions and generate detailed specifications & drawings and analyze static and dynamic structures to quantify performance. This is a full-time, exempt position based at our Irvine, California headquarters. Key Responsibilities Design and Development: Conceive, develop and design precision electromechanical systems for the extreme conditions encountered in space environments. Ensure designs meet mission requirements and industry standards. Leadership: Provide ongoing training and mentorship to junior engineers. Integration: Work with engineering teams to integrate mechanical systems into spacecraft and satellite platforms. Ensure compatibility with electrical, thermal, and software systems. Testing and Validation: Create and execute test plans for mechanical systems. Perform performance and reliability testing to validate system functionality and compliance with specifications. Problem-Solving: Address and resolve technical issues related to mechanical systems. Troubleshoot problems and implement corrective actions as needed. Documentation: Prepare and maintain accurate documentation, including design specifications, test reports, and technical manuals. Ensure all documentation meets company and industry standards. Collaboration: Collaborate with cross-functional teams, including electrical engineers, software engineers, and mission planners, to address and resolve integration and performance issues. Required Qualifications Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. 15+ years of experience in Mechanical Engineering, with experience in designing and developing high precision electromechanical systems for extreme environments. Knowledge of mechanical system design, structural analysis, kinematics, dynamics, electric motors, actuators, and controls. Proficiency with engineering tools and software for design and simulation (e.g., SolidWorks). Experience with 3D CAD, 2D drafting, GD&T, and tolerance analysis. Strong analytical and problem-solving skills, with the ability to troubleshoot and resolve technical issues. Effective verbal and written communication skills, with the ability to present technical information clearly and collaborate with team members. Must be able to obtain a Secret and/or a TS/SCI clearance. Required Qualifications Master's degree in mechanical engineering or a related field. 15+ years of experience in precision machine design. Experience with spacecraft and satellite systems, including an in-depth understanding of the unique requirements and challenges associated with mechanical systems for space missions. Expertise in mechanical systems design and integration techniques as applied to motors, electronic components, bearings, gears, power screws, springs, clutches, brakes, materials, lubrication, and coating selection. Familiarity with high-stress materials, thermal control systems, and space-qualified components. Demonstrated ability to contribute to innovative mechanical system designs and improvements. Advanced, hands-on skills with machine tools and various fabrication techniques. Principal Spacecraft Mechanism Design Engineer/Principal Mechanical Engineer Salary: $175,000 - $250,000 USD ITAR Requirements: This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: We offer a comprehensive compensation and benefits package designed to support the well-being and professional growth of our employees. In addition to a competitive base salary and company stock, determined by factors such as job-related knowledge, education, skills, experience, and market demand, full-time employees are eligible for: Equity: Receive equity in Turion Space, letting you benefit from the company's success Health Insurance: Comprehensive medical, dental, and vision coverage for employees and their dependents. Retirement Plans: Access to a 401(k) plan to help you plan for your future. Paid Time Off: Generous vacation days, personal days, sick days, and holidays to ensure you have time to recharge. Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth. Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment. We are dedicated to providing a supportive and enriching environment for our team members, recognizing that our collective success is built upon the well-being and satisfaction of each individual. Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

About the Organization Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. Description JOB TITLE: Jr. Mechanical Engineer DEPARTMENT: Engineering REPORTS TO: Mechanical Engineering Manager EMPLOYEE TYPE: Full Time LOCATION: 19772 Pauling, Foothill Ranch, CA 92610 GENERAL JOB DESCRIPTION: Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. The Mechanical Engineer applies skills and knowledge needed to achieve a cost-effective, functional, and ergonomic design to the development of ATE Systems and test fixtures. This Engineer works in conjunction with Electrical Engineers in order to provide a fully custom solution that meets the customer's needs. ESSENTIAL DUTIES & RESPONSIBILITIES: * Provide detailed design information to management and projects. * Perform design activities for various interface panel projects. * Interface with other engineering disciplines as required. * Utilize 3D CAD Design Software (SolidWorks) to perform mechanical design of power systems with subcomponent Placemen, cabinet structural design for ATE Systems. * Jack-of-all-trades problem solver. * Research new design processes. * Assist in fixturing design. * Direct the fabrication, assembly of product, and work cell concepts being prototyped and implemented. * Prepare clear and concise documentation for CAD Drawings and Part List for systems or sub-Assemblies of a given project. * Development and creation of design sketches ready to be modeled. * Coordinate materials procurement. QUALIFICATIONS: * B.S. in Mechanical Engineering or relevant experience (1-2 years' experience). * Intermediate in SolidWorks CAD software. * Provable skills of CAD command (part, assembly, drafting). * Good English language skills. * Multidisciplinary technical knowledge is a plus. SUPERVISORY RESPONSIBLITIES: This is a non-supervisory position. PHYSICAL DEMANDS: General office skills and dexterity are required. Must be able to lift 30 pounds. CHROMA BENEFITS: * Bonus programs based on individual and company performance * Vacation, sick, bereavement time * Medical, dental, and vision plans for employees and dependents * Life insurance, AD&D, long term disability, and employee wellness programs * 401(k) retirement accounts with immediate vesting of company contributions * Profit sharing programs WORKING CONDITIONS: Chroma Systems Solutions is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, political affiliation, marriage or veteran status, and will not be discriminated against on the basis of disability. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Pay Range $25-$33.34 Tags BOM, SolidWorks, Mechanical, schematics, DraftSight, entry-level Location Pauling

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. #LI-TS1 ATI is seeking to hire a Design Engineering Intern for our Summer 2026 Internship Program. This position will be based in Irvine, CA and will run from June to August 2026. Relocation and housing assistance is available for the summer. Our Internship Program is designed to provide a rewarding experience and the features of ATI's Internship Program include: Experiential Learning: Hands on work assignments and projects related to your career field of interest Professional Development: Curriculum designed to develop your business acumen and professional skills Professional Networking: Planned events meant to give you informal networking opportunities with other interns and employees As an intern at ATI, you'll gain hands-on experience, learn from experts, and collaborate with teams that do truly exceptional things. The projects and skills outlined below will be guided and directed by an established ATI-Professional in your field of interest. What You'll Do Work closely with our engineering team to support ongoing projects Obtain aerospace manufacturing experience through the assistance of the engineering team Perform other engineering duties as assigned. What You'll Gain Experience in the aerospace industry Experience working in forging environment Lean manufacturing experience

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. #LI-TS1 ATI is seeking to hire a Design Engineering Intern for our Summer 2026 Internship Program. This position will be based in Irvine, CA and will run from June to August 2026. Relocation and housing assistance is available for the summer. Our Internship Program is designed to provide a rewarding experience and the features of ATI's Internship Program include: Experiential Learning: Hands on work assignments and projects related to your career field of interest Professional Development: Curriculum designed to develop your business acumen and professional skills Professional Networking: Planned events meant to give you informal networking opportunities with other interns and employees As an intern at ATI, you'll gain hands-on experience, learn from experts, and collaborate with teams that do truly exceptional things. The projects and skills outlined below will be guided and directed by an established ATI-Professional in your field of interest. What You'll Do Work closely with our engineering team to support ongoing projects Obtain aerospace manufacturing experience through the assistance of the engineering team Perform other engineering duties as assigned. What You'll Gain Experience in the aerospace industry Experience working in forging environment Lean manufacturing experience

Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. Qualifications You are passionate about: * Working collaboratively with others. * Having ownership in the work you do. * Using your talents to positively affect communities. You bring to the team: * Strong communication skills * Ability to contribute and work well on a team * Proficiency in Microsoft Excel, Word, and Outlook * Working knowledge of AutoCAD * Working knowledge in Synchro is a plus * Problem-solving and decision-making skills * Pursuing a degree in civil engineering #LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range $25 - $28 USD Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: * Receive a competitive 401(k) match * Be empowered to build your career with tailored development paths * Have the possibility for flexible work arrangements * Engage in work that has a positive impact on communities * Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here. Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email. Create alert

Essential Functions: The Project Engineering Intern assists the Project team with various activities for onsite construction projects. Responsibilities: * Assist in the development and monitoring of project budgets. Collect and code project cost documents and continually monitor and update the budget to reflect changes in work * Monitor of project schedules and review work schedules for improving work methods * Oversee the timely submittal and completion of documentation required by the owner and agencies * Prepare subcontractor and supplier agreements to be executed and prepare correspondence to document changes in work or costs * Work with foreman and superintendents to monitor all activities to insure a safe and efficient working environment for crew, subcontractors and the public * Promote good public relations with owners, subcontractors and the public * Other duties and responsibilities as assigned by the Project Manager or his/her designee Qualifications: * Must be a current student in an engineering or construction related degree program * Previous experience in construction industry a plus; * Desire to work in Water/Wastewater industry upon graduation * Working knowledge in Microsoft Office suite (such as Outlook, Word, Excel, PowerPoint, etc.) as well as the use of the internet * Advanced AutoCAD, AutoCAD MEP and Revit software use required * Must have good communications and analytical skills * Must have excellent customer service and interpersonal skills * Strong attention to detail * Ability to manage multiple projects and work independently * Ability to assess and quickly solve problems Working Conditions: 100% of the time is spent on the project. Project Engineers must be able to work flexible hours and locations throughout the area and/or other cities/states. Salary: $20-$27/hr depending on experience J.R. Filanc Construction Company, Inc. is proud to be a drug free workplace. J.R. Filanc Construction Company, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status or any other characteristic protected by applicable federal, state or local law. This job description lists the primary or "essential functions" of the job. It is not intended to be all inclusive. Other duties may be assigned by management. Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

StarFish Medical - Irvine, CA (On-Site) StarFish Medical partners with innovators to develop breakthrough medical technologies. Our Irvine team is looking for a mechanical engineer who excels in early-stage product development, someone who enjoys transforming ambiguous ideas into functioning prototypes through rapid iteration, clever mechanisms, hands-on experimentation, and thoughtful engineering If you thrive on concept ideation, feasibility testing, prototyping, and architecting systems from the ground up, this role is designed for you. You will collaborate closely with a multidisciplinary team to explore design options, evaluate technical feasibility, and develop first-generation hardware that lays the foundation for subsequent product development phases. Why You'll Love It Here At the Irvine site, you'll join a small, high-energy team that values ingenuity, curiosity, and practical problem solving. You'll work in a creative environment where your early-stage engineering skills directly impact breakthrough medical technologies. Why This Role Is Different You will spend most of your time: Generating concepts and architectures Building and iterating early prototypes Solving novel, open-ended mechanical problems Running benchtop experiments to drive design decisions Exploring methods, mechanisms, and materials using proof-of-principle models If you enjoy the front end of innovation, you'll feel at home here. What You'll Do Define and refine mechanical requirements through technical investigation and early feasibility work Lead concept development, mechanism ideation, and architecture-level design Build benchtop prototypes quickly using CNC machining, sheet metal, 3D printing, compression molding, laser cutting, and other creative fabrication approaches Conduct feasibility tests, characterize performance, and propose design directions based on experimental evidence Evaluate materials, mechanical approaches, and design trade-offs early in the product lifecycle Communicate design intent through sketches, block diagrams, models, and quick CAD concepts Follow best practices to create robust 3D models and drawings in SolidWorks for early prototypes, assemblies, and evolving system architectures Maintain revision control of 3D models and drawings using SolidWorks PDM Collaborate with electrical, firmware, software, human factors, and industrial design teams during concept exploration and development Work with vendors to produce prototypes and custom components, and to evaluate manufacturability Transition successful early concepts into structured development for later-stage refinement What You Bring Bachelor's degree in Mechanical Engineering 5 to 8 years or more of hands-on mechanical product development experience, including significant early-stage work Strong proficiency in mechanism design, prototyping, and engineering fundamentals Demonstrated ability to solve open-ended technical problems with incomplete information Excellent CAD skills (SolidWorks) applied to conceptual and early-stage design Breadth of experience with common manufacturing processes such as CNC machining, sheet metal, injection molding, etc. and experience designing parts to be made using these processes Comfortable communicating evolving design concepts to both technical and non-technical audiences Preferred Qualifications Experience working on complex electromechanical or mechatronic systems Hands-on experimentation background (physics, systems modelling, benchtop testing) Exposure to regulated development (FDA, ISO 13485, ISO 9001, AS9100, etc.) Consulting experience or work on multiple varied product categories Experience with FEA for feasibility studies (structural, thermal, or fluid) Salary Base Salary: USD 110,000 - 160,000 annually Base salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Annual variable compensation: Target of 3 -10% of base salary, tied to goal achievement Additional Compensation: Employees are eligible for a profit-sharing program Benefits of working at StarFish Medical: Becoming a part of a group of passionate individuals striving to make a meaningful impact, combined with: Make a meaningful impact through life-changing medical technologies Excellent benefits package for you and your family Profit-sharing program Monthly all-hands meetings and an open communication culture Active social committee with events during work and outside hours. Some for individuals, some for families 401(k) participation Vacation and sick days Why Join Us? At our Irvine location, you'll join a close-knit team that values initiative, curiosity, and pride in creating and maintaining an outstanding workspace. We'd love to hear from you, especially if you're curious, hands-on and thrive in mechanism design, concept development, and early-stage engineering! Don't meet every single requirement? Studies show that women and people of colour are less likely to apply for jobs unless they meet every qualification. If you're excited about this role but your experience doesn't align perfectly, we still encourage you to apply-you may be just the right fit. StarFish Medical is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide reasonable accommodations upon request throughout the hiring process.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary If you are aligned with our mission, we want you to join our team. As a member of Rivian's Electrical Hardware mechanical team, you will be an intrinsic part of shaping new and exciting products - you will develop from concept into volume production while driving the creation of innovative, impactful, and world-class performing parts. Responsibilities Collaboratively design and develop electrical hardware components from concept to launch, interfacing with cross-functional partners and leading the mechanical design and integration in our next-generation vehicles. Validation build, test, and analysis of our future components. Document test processes and results. Complete root cause analysis of failures and issues found in assembly and testing. Tolerance analysis for new component and fixture designs. Benchmarking studies on new products and components for evaluating best-in-class designs. Lead supplier discussions on all mechanical design and development tasks to meet program milestones. Demonstrate curiosity and high learning agility. Exhibit "Rivian Compass" values in everything you do. Qualifications 3 years of experience in Automotive or equivalent or Masters Degree B.S degree (or above), in mechanical engineering, or relevant equivalent experience CAD experience, ideally Catia V6 Great problem-solving and communication skills Basic knowledge of GD&T Strong understanding of engineering first principles Ability to self-direct while managing ambiguity Pay Disclosure Salary Range for irvine, CA based applicants: $85,000 - $107,000 annually (Actual compensation will be determined based on experience, location and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time and part-time employees, their spouse or domestic partner, and children up to age 26. Full Time Employee coverage is effective on the first day of employment. Part-Time employee coverage is effective the first of the month following 90 days of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. 3 years of experience in Automotive or equivalent or Masters Degree B.S degree (or above), in mechanical engineering, or relevant equivalent experience CAD experience, ideally Catia V6 Great problem-solving and communication skills Basic knowledge of GD&T Strong understanding of engineering first principles Ability to self-direct while managing ambiguity Collaboratively design and develop electrical hardware components from concept to launch, interfacing with cross-functional partners and leading the mechanical design and integration in our next-generation vehicles. Validation build, test, and analysis of our future components. Document test processes and results. Complete root cause analysis of failures and issues found in assembly and testing. Tolerance analysis for new component and fixture designs. Benchmarking studies on new products and components for evaluating best-in-class designs. Lead supplier discussions on all mechanical design and development tasks to meet program milestones. Demonstrate curiosity and high learning agility. Exhibit "Rivian Compass" values in everything you do.

Job DescriptionMechanical Engineering Technician To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills Ability to contribute and work well on a team Proficiency in Microsoft Excel, Word, and Outlook Working knowledge of AutoCAD Working knowledge in Synchro is a plus Problem-solving and decision-making skills Pursuing a degree in civil engineering #LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range$25-$28 USDAdditional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionSalary: $25/Hourly Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.