Mechanical engineering internship part time jobs - 34 jobs

Sunpower, based in Athens, OH, is looking for an Engineering Intern. The ideal candidate will be a junior or higher majoring in Mechanical Engineering, Electrical Engineering, Industrial and Manufacturing Systems Engineering, or Industrial Technology. The ability to quickly learn and apply new knowledge in dynamic situations is critical. The position could result in a multiple semester position and may lead to a full-time placement after graduation. Common Tasks * Perform characterization and performance tests on Sunpower products, record and analyze data * Apply and further develop skills and concepts learned in core Engineering coursework * Assist in designing, fabricating, assembling, and implementing jigs and fixtures for prototype production * Assist in lab setup and development of test programming * Assist in mechanical design of components * Assist in analyzing heat transfer, mechanical stresses, thermodynamics, FEA, etc. * Perform modifications and fabrication with hand tools * Take physical measurements with standard instruments Position Requirements * Applicants must work within a matrixed organization which requires the ability to work within a team, the capability to apply a broad range of Engineering principles, and the flexibility to work among a multi-disciplinary team. * Education: Relevant undergraduate or master's degree in process. (Mechanical Engineering, Electrical Engineering, Industrial and Manufacturing Systems Engineering, Industrial Technology). * Writing skills to accurately document performance data and observations from testing. * Support in administrative tasks such as data entry and collection. * Proficient in the use of Microsoft Office software applications. * Present to peers, leaders, and upper management as needed. * Applicants must be US citizens Additional Information * This position may be part-time or full-time. Exact workload will be determined based on the candidate's availability, current courseload, and applicable internship requirements but in the range of 20-40 hours per week.. * Sunpower requests a copy of candidate's transcript prior to interviewing. Candidate's GPA in core coursework will be factored into the selection process but will not be the sole selection criterion. * Candidates are expected to be capable of receiving complex instructions and performing them in a timely and efficient manner. * Candidates are expected to be capable of lifting object up to 10 pounds frequently and up to 20 pounds occasionally. * No travel is expected in performance of this positions' duties. About Sunpower Since our founding in 1974, Sunpower has been the world leader in free-piston Stirling technology. Sunpower has implemented free-piston technology in our commercial line of CryoTel cryocoolers and our aerospace Stirling cryocoolers and Stirling engines. Sunpower's Engineering services include production of spaceflight cryocoolers and design, development, and fabrication of prototype free-piston Stirling machines. Sunpower's has strong ties to the local community including a long history of connections and collaboration with Ohio University. Our founder and the inventor of our technology is a former OHIO professor, and ~25% of our current staff are OHIO graduates. Including graduates from Hocking College and local high schools, more than half of our staff can be traced to the Southeast Ohio community. Learn more about us at ******************** Compensation Employee Type: Hourly Salary Minimum: $30,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Athens

---VISA SPONSOSHIP NOT AVAILABLE. About Us: Gasser Chair is a distinguished leader in the design and manufacturing of premium seating solutions, proudly trusted by some of the world's most iconic brands, including Wynn, Caesars, Ritz-Carlton, and Hilton. Renowned for our unwavering commitment to excellence and innovation, we design and produce custom seating solutions that seamlessly blend style, comfort, and durability, setting the standard in quality and design. Founded in 1946, Gasser Chair has a rich history rooted in skill and ingenuity. As a third-generation, family-owned business, we have grown from a small operation to a global brand while staying true to our values of quality, integrity, and customer focus. With decades of expertise and a passion for innovation, we continue to redefine what is possible in custom seating solutions. We encourage you to visit our website at ******************* to learn more about our history, explore our product offerings, and discover how we bring our legacy of craftmanship and innovation to every project we undertake. Our Core Values: At Gasser Chair, our core values define who we are and how we operate. We are committed to being Respectful, creating a welcoming and supportive environment; Accountable, working together to ensure success; Process-Driven, dedicated to following and improving best practices; and Adaptable, embracing positive change. These values are not just words - they are the heart of how we work and grow together. We look for team members who share these principles and bring them to life every day. When you join Gasser Chair, you become part of a team that values collaboration, dedication, and a commitment to doing great work. Your success here starts with embracing our core values and contributing to a culture where everyone thrives. Job Title: Mechanical Engineering Intern - Manufacturing Location: Gasser Chair Company Plant Job Type: Internship (Full-Time/Part-Time) Duration: Summer 2025 Department: Manufacturing Engineering Reports To: Director of Engineering --- About the Role: We are seeking a Mechanical Engineering Intern to join our manufacturing engineering team. This role offers hands-on experience supporting production processes, equipment optimization, and continuous improvement initiatives. As an intern, you'll work alongside experienced engineers to solve real manufacturing challenges and gain valuable exposure to lean manufacturing, process design, and plant operations. --- Key Responsibilities: · Assist in designing, testing, and implementing mechanical systems and process improvements on the production floor. · Support continuous improvement efforts through time studies, root cause analysis, and efficiency audits. · Participate in the design and development of jigs, fixtures, and tooling to enhance manufacturing performance. · Help maintain and update technical documentation such as process instructions, CAD drawings, and equipment manuals. · Collaborate with maintenance, quality, and production teams to identify and resolve operational issues. · Collect and analyze production data to identify trends and recommend improvements. · Ensure compliance with safety and quality standards in all tasks. --- Qualifications: · Currently pursuing a Bachelor's degree in Mechanical Engineering or a related field. · Solid understanding of mechanical engineering fundamentals. · Familiarity with CAD software (e.g., SolidWorks, AutoCAD) and Microsoft Office tools. · Strong analytical, problem-solving, and communication skills. · Ability to work effectively in a fast-paced manufacturing environment. · Eagerness to learn and contribute to a team-oriented setting. ---VISA SPONSOSHIP NOT AVAILABLE. --- Preferred Qualifications: · Coursework or prior experience in manufacturing processes, industrial engineering, or lean systems. · Familiarity with Six Sigma or lean manufacturing principles. · Hands-on experience with machining, assembly, or fabrication (through labs, projects, or previous internships). Upon an offer of employment, a background and drug screen are required.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is currently searching for a Mechanical Designer, with a minimum of 4 years of experience, to join our Building Design Services team in the Columbus, OH office. Designer will be working in a team environment to develop water / wastewater related projects. Our growing team has a lot of exciting projects on the horizon which will create an excellent opportunity for motivated designer to elevate their knowledge and advance into the group. Designer will primarily focus on 3D modeling of HVAC, Plumbing, and Fire Protection while assisting with development of design drawings, providing support during project planning, working alongside project team during design, and engaging QA/QC reviews. Role accountabilities: Mechanical Designer will assist in developing conceptual layouts at the start of the project as well as create and maintain mechanical 3D Revit models for each project. The Designer will also create, monitor, and/or review preliminary and detailed design drawings and assist in the development of conceptual cost opinions (i.e. quantity take-offs) and possibly other engineering related. Additional duties include: Work effectively in team situations while establishing and maintaining strong relationships with other teams where overlap of client project work exists. Work directly with a variety of engineering disciplines, office / project staff and sub-contractors, throughout the project life cycle, and therefore should have clear and concise, oral and written communication skills with a demonstrated ability to work effectively with others in the preparation of design documents, participation in team meetings and field interaction with clients and subcontractors. Assist with development and management of personal workload and coordination with team workload and project budgeting. Ensure project compliance with all Arcadis practices and quality and safety standards and facilitate coordination for timely completion and submission of projects on time and within budget. Required Qualifications 4 years of experience with mechanical drafting/modeling for buildings or water/wastewater treatment design and construction projects. Proficient at using of AutoCAD, Revit and 3D modeling. Preferred Qualifications Professional work experience in similar role with a Consulting Engineering firm. Experience with BIM (Building Information Modeling) software and both 2D & 3D drafting. Experience with x'refing, layering, preparing quantity takeoffs and estimates. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $68,000 - $112,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #WaterJobsOhio

Communities everywhere share the need for clean water. And as they work to meet that need, they're facing new, more complex challenges every day. Our water professionals collaborate to contribute innovative ideas, guided by scientific rigor and a vision for sustainable growth. Every day, we're helping communities improve, reuse, and protect our world's most precious resource. Join our team to deliver transformational projects that will benefit future generations. Grow with us, H2O+U. Your Opportunity As a Mechanical Engineer, your role in our professional consulting services team is to work independently on multidisciplinary projects of various complexity as a discipline leader, through all phases of a project lifecycle. You are responsible for leading the design of HVAC, Plumbing, and Fire Protection systems on municipal water treatment plants, pumping stations, wastewater treatment plants, hydroelectric power plants, and private industrial water applications in different locations across North America. Every project has its own unique challenges, and you are considered a resource for solutions to those challenges. Your Key Responsibilities * Lead the design of HVAC, Plumbing, and Fire Protection systems for various projects from preliminary design through bid and construction phases. * Develop basis of design reports (BODR) and technical memorandums for small-to- medium size projects, setting criteria for following design stages. * Develop design documents including drawings, specifications, and opinion of probable construction costs (OPCC). * Respond to RFIs, review submittals and shop drawings, and attend construction site visits for design compliance. * Develop HVAC calculations including building cooling and heating load calculations, air distribution system sizing, and hydronic distribution system sizing. * Develop Plumbing calculations including domestic water, sanitary waste, and storm water systems sizing. * Apply design codes and standards based on the project needs. * Coordinate design with other design disciplines throughout the life of a project. * Assist with mentoring engineers in training (EIT) to develop and strengthen their skills and technical abilities. * Travel to job sites in your state of residence and other states (5%) Your Capabilities and Credentials * In-depth understanding of HVAC engineering fundamentals such as psychrometric chart, refrigeration cycle and heat transfer. * Experience in designing HVAC and Plumbing systems. Fire Protection design is a plus. * Strong familiarity with design codes and standards of practice. * Strong written and verbal communication skills. * Strong understanding of all phases of project deliverables. * Ability to lead one or more projects simultaneously. * Experience with HVAC load calculation software - HAP or Trace. * Strong knowledge of AutoCAD and Revit. Preferred Qualifications * Experience in designing HVAC, Plumbing, and Fire Protection systems for water treatment plants, wastewater treatment plants, pumping stations, chemical storage rooms, and hydroelectric power plants. * Familiarity with NFPA 820 requirements for HVAC systems serving wastewater treatment plants. * Strong client presentation skills. Education and Experience * Bachelor's degree in mechanical engineering. * Licensed Professional Engineer (PE). NCEES record ready to obtain Professional Engineering licensure in multiple states. * Minimum of 7 years of experience Typical office environment working with computers and remaining sedentary for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. Pay Range: * Locations in CO, HI, IL, MD & Various CA, NJ Areas - Min Salary $ 112,300.00 - Max Salary $ 168,500.00 * Locations in WA, DC & Various CA areas - Min Salary $ 120,500.00 - Max Salary $ 180,800.00 Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | IL | Chicago Organization: 2243 Water-US Delivery-Chicago IL Employee Status: Regular Travel: Yes Schedule: Full time Job Posting: 11/07/2025 03:07:12 Req ID: 1001524 \#additional Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

Looking for a Design Engineering Internship for spring 2026? AeroControlex Group, an aerospace manufacturer located in South Euclid, is looking for a full-time or part-time intern to join the team. Responsibilities: * Prepare models and or drawings of components and assemblies. * Assist Design Engineers with support activities such as researching specifications, test methods, etc. * Assist Design Engineers with technical documents such as technical proposals, test reports, failure reports, etc. * Generate and or review drawing changes with drafters. * Purchase prototype hardware and manage vendors * Create and or review drawing release packages, drawing revisions and other design documentation in concurrence with company procedures. * Assist engineering lab technicians with building and testing prototypes * Assist engineering lab technicians with entering test data and inspections * Complete other duties as assigned Qualifications: * Candidates must be action oriented and self -starters. * Must be comfortable occasionally working in a hands-on engineering lab to help technicians set up tests, tear down parts, etc. * Must be a good communicator and able to interact with other groups outside of engineering. * Ability to effectively oversee small to medium tasks or projects. * Candidates should have a basic understanding of how to read drawings, drawing layouts, tolerance stack-ups, and material specifications * Familiarity with the following is preferred: Machining, Welding, Plating, Metallurgy, Coatings, Heat Treating, Casting, Additive Manufacturing Techniques Computer Skills Required: * CAD Drafting/3-D Solid Modeling (Solidworks preferred), Word Processing (MS Word), MS Excel for Graphing and Spreadsheets, MS PowerPoint Preferred: * Data Acquisition Software (Labview preferred), Finite Element Analysis (ANSYS preferred), Program Schedules (MS Project) Education: * Pursuing a Bachelor of Science or Masters of Science Degree in Mechanical or Aerospace Engineering. Sophomore - senior year or equivalent is preferred for undergraduate students * Completed classes in the following subjects is preferred: Fluid Dynamics, Statics & Dynamics, Design of Mechanical Components, Vibration, Stress and Strain, Strength of Materials, (Core engineering curricula) This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization. An equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Work Location: In person

Junior Engineer Intern - Summer 2026Job Category: Intern/Co-op Time Type: Part time Minimum Clearance Required to Start: SecretEmployee Type: Part-Time On-CallPercentage of Travel Required: Up to 10%Type of Travel: Continental US* * * The Opportunity: You'll get to work with a dynamic and growing team of Electrical/Marine/Mechanical/Structural Engineers and Naval Architects. You will be tasked to solve and manage various technical problems in the area of Hull, Mechanical and Electrical (HM&E) systems in support of the Machinery and Systems Engineering Managers. You'll provide technical support on various engineering ship design projects as an individual contributor but also as part of an engineering team primarily in support of the Naval Sea Systems Command (NAVSEA) and the Military Sealift Command (MSC). Responsibilities: Perform engineering site visits and ship checks at various Navy and Commercial Shipyards and conduct surveys which you will generate analyses and create AutoCAD design drawings of Mechanical and control system modifications which comply with commercial and naval engineering requirements. Development of marine auxiliary and piping systems, review and analyzing preliminary and functional design documentation and development of ship system specifications. Review and analysis of mechanical and electrical propulsion systems, and auxiliary/ piping systems for technical data packages developed to support design and construction of Navy and commercial vessels. Provide engineering services support to including Spec writing, design, mechanical calculations, outfitting design, marine drawing, selected record drawing (SRD) updates, ship checks and other technical work document preparation in accordance with drawing standards and good marine design practice. Self-Starter, multi-task capability, technically savvy, interpersonal skills, team player and ability to market our CACI team capabilities. Interpersonal skills required to work with others and communicate effectively Attention to detail Self-starter, hard worker, multi-tasking Entry level experience using AutoCAD, SolidWorks, and or other similar CAD software Qualifications: Required: Pursuing a BS Degree in Marine Engineering, Mechanical Engineering or related degree Must be able to obtain/maintain required clearance Strong verbal and written communication skills with complex technical issues. The ability to create graphical representations and PowerPoints Strong analytical skills Willingness to travel 10% of the time Capable to perform design ship checks onboard MSC and Navy ships - ________________________________________________________________________________________ What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. ________________________________________________________________________________________ Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $39,900-$79,900 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Examination Date Week of February 16, 2026 Civil Service Board Office 371 West Second Street, Lower Level Dayton, Ohio 45402 *Certified candidates will be sent an email containing specific exam details at a later date. Responsibilities The Engineering Aide II performs field data collection and surveying for topographic base-maps and as-builts. The incumbent will compose layouts, plans and profile sheets for various public works and water utility improvements. Assignments typically include the operation of both modern and traditional survey/field data collection equipment and related instruments. The Engineering Aide II uses line locating equipment to locate water, sanitary and storm utilities. Responsibilities includes setting out stakes and marks to conduct a survey, searching for previous survey points, such as benchmarks, property pins or old stone markers and using GPS equipment to create and maintain records of location, size, pressures, fittings, depth, pipe types, installation dates and valve types on water and sewer mains, fire hydrants, manholes, service lines and laterals, main line valves and related water distribution and sewer collection facilities. The incumbent will also be required to prepare computer aided drafting drawings (CAD); making layout, plan and profile sheets for various public works and water utility improvements. Minimum Qualifications Education Graduation from high school (or G.E.D.). Experience Must meet one of the following experience requirements: Six (6) months of experience in land surveying, civil construction, construction inspection or related technical field AND basic knowledge of AutoCAD or similar computer-aided drafting programs; OR One year of experience working in Water Utility Field Operations, Water Supply and Treatment or Water Reclamation divisions within the Department of Water in a technical capacity. License Requirements Must possess a valid driver's license at time of appointment and maintain thereafter as a term and condition of continued employment. Promotional Qualifications Must be a full-time permanent or part-time permanent employee in pay grade 116 (Wage) or below, pay grade 25 (Clerical) or below, or equivalent, and been employed for 6 consecutive months by the City of Dayton in a classified Civil Service position. Identical scores will be broken by (1) seniority and (2) random selection method. Open Competitive Applicants Final appointment is contingent upon the applicant passing a job-related medical examination and providing documentary evidence of Employment Authorization and Identity. Identical scores will be broken by a random selection method. Notes Examination dates and times are subject to change. Calculators will be provided for the Civil Service examination. Applicants appearing on the Promotional eligible list shall be considered for appointment prior to those on the Open Competitive list. Applicants are responsible for providing all necessary employment dates, experience, training, or any other requirements as stated in the Exam Announcement, in order for their application to be considered for certification and admittance to the examination process. Background Check A background investigation is required prior to employment. All candidates must pass any level of background investigation applicable to the position, including current city employees seeking transfer, promotion, demotion, etc. into a classified position. Drug and Nicotine Testing Final appointment is contingent upon the applicant passing a drug screen. Applicants offered employment with the City will be required to pass a nicotine screening. Newly hired employees must remain tobacco and nicotine free as a condition of continued employment. The Tobacco and Nicotine Free Hiring Policy does not apply to current City employees.

Job Description ENGINEERING INTERN We are seeking an aspiring engineer to fill an Engineering Intern position. Our ideal applicant is a current student of an electrical engineering or mechanical engineering program. While you do not need to have prior job experience, we prefer all interns to have a 2.5 GPA or higher and basic engineering course work completed. You will learn the responsibilities of an engineer under the supervision of our more senior employees. Qualifications of an Engineering Intern: Strong interest in manufacturing Solution based problem solver Ability to work with and grow in a team environment Ability to manage multiple tasks simultaneously Strong verbal communication skills Proficient with MS Office Suite (Word, Excel, PowerPoint) Regularly required to sit, walk, stand, talk, see, hear, and lift objects up to 25 pounds PRIMARY DUTIES: Learning the responsibilities of an engineer Fulfill administrative duties around the office Running errands for the engineering staff Incorporate academic knowledge into hands-on work PREFERNCES: Microsoft Office Electrical Engineering High School Diploma/GED System Design Schematics AutoCAD Mechanical Engineering Systems Engineering Stewart Glass does not sponsor interns or full-time employees for work authorization. Job Type; Internship Part time or full time positions available, hourly. Work Location: On site, Logan, Ohio Please note: No benefits are offered to part-time or seasonal employees as an Engineering Intern. Stewart Glass is seeking to onboard (2) engineering interns ASAP prior to the 2026 summer break that have part-time availability and can adequately manage their class workload.

The Mall at Fairfield Commons (Beavercreek) Associate Department: Facility-Mechanic Round One Entertainment is looking to hire a part-time, non-exempt Entry Level Mechanic. Wage: $14 - 15.75/Hour NO EXPERIENCE IS NECCESSARY Are you into video games, bowling, karaoke? Are you friendly, outgoing? Do you enjoy being around people and work in a fun environment? Then you're the kind of person we'd love to hire! Overview: The Technician is responsible for all the operations of an amusement arcade and/or Bowling machines. His/her job is to oversee, maintain, and repair arcade machines and bowling machines. Essential Duties: Responds to customer complaints of machine malfunction; analyzes the mechanism to find the root of the problem. Assist the Facility manager with the installation, maintenance, and repairs of both mechanical and circuitry issues in the arcade games and/or bowling machines. Able to readily identify the most common problem with components like controls and audio systems. Other: Performs maintenance and repair tasks. Keeps a clean and organized workshop. Ability to work varying shifts, weekends, and holidays, as well as overtime to support business needs. Other duties may be assigned. Non-Essential Duties: Follows up to complete any assigned work. Maintains high ethical standards in the workplace. Reports all irregular issues and problems to upper management for a solution. Maintains good communication with all employees and outside contacts. Complies and maintains confidentiality of all company policies and procedures. Responsible for maintaining a clean and safe working area. Qualifications: The Technicians must possess a strong sense of customer service and interpersonal skills to include high integrity and respect for everyone. The Technician must demonstrate solid communication skills, strong critical and analytical thinking skills, and appreciation for diversity (thought, ethnic, gender, etc.). Education and/or Experience: Two-year related experience; or equivalent combination of education and experience is preferred but not required. Work Environment: While performing the duties of this job, the employee regularly works in a bowling center/arcade environment where high levels of noise, dust, and activity can be expected. The noise level in the work environment is usually loud. Physical Demands: While performing the duties of this job, the employee is regularly required to bend, stretch, twist, climb, and have a high level of mobility/flexibility in small spaces. The employee is required to stand and walk for extended periods of time without breaks during busy times. In addition, the employee will need to be able to use their hands/fingers to handle and feel and reach with hands and arms. Lifting and/or moving up to 100lbs with assistance is required. Benefits: 1 hour of time play (non-prize) arcade games per week. 90 minutes of bowling per week (shoes included). 1 hour of karaoke/billiards per week. 50% discount on food items per working shift. 1 free beverage per working shift. The above job description identifies the essential job functions and skills needed by the person or persons assigned to this position. These job functions and skills are not intended to be a complete and exhaustive list of all responsibilities, duties, and skills required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. The information contained herein is subject to change at the company's discretion. Check out our Facebook (Search: Round1HQ), Instagram (Round1USA), and Twitter (@Round1USA), Indeed (Round One Entertainment Inc.), Glassdoor (Round One Entertainment Inc.) for more information!

Be Here. Be Great. Working for a leader in the insurance industry means opportunity for you. Great American Insurance Group's member companies are subsidiaries of American Financial Group. We combine a "small company" culture where your ideas will be heard with "big company" expertise to help you succeed. With over 30 specialty and property and casualty operations, there are always opportunities here to learn and grow. At Great American, we value and recognize the benefits derived when people with different backgrounds and experiences work together to achieve business results. Our goal is to create a workplace where all employees feel included, empowered, and enabled to perform at their best. P&C IT Services provides professional services to help our business units and corporate functions use technology to create, manage, and optimize information and business processes. IT Services can include a wide range of activities such as: software development, data management, Cloud services, IT security, network security, technical support, establishing and overseeing access rights, procuring and maintaining equipment or software, managing the infrastructure, and defining security procedures, The overall goal of IT Services is to provide technology solutions that increase efficiency, reduce costs, and give our company a competitive advantage over our competitors. Our Great American Software (GAS) Lab is looking for an Extreme Programming Engineering Intern to work a hybrid schedule (3 days a week in the office, 2 days remote) out of the Cincinnati office for the summer. The Extreme Programming (XP) Intern in the Great American Software Lab will work in a multi-language cloud native environment utilizing pair programming and TDD (Test Driven Development) in an accelerated learning environment. You will not have a more challenging and learning opportunity than this! The ideal candidate is looking for a collaborative environment building distributed systems that enable enterprises to focus on their business rather than re-architecting a cloud platform from scratch. Pair programming has always been something that you wanted to try out and will accelerate your learning as you work with a seasoned developer. As cliché as it may sound, every day is completely different from the next. We have a general framework for what our day looks like and the majority of it will be spent with your pair. Our product teams are comprised of product owners, product managers, designers, and cloud native engineers. Requirements: Tech stack: Java, Spring, Spring Boot, Full stack development • Ability to dive into a large polyglot codebase and contribute as you learn • Being okay with the uncomfortable feeling that comes from learning new things • Interest in exploring new programming paradigms, languages, and patterns • Demonstrable ability to research problems and break them into discrete parts • Have empathy with your pair and freely exchange feedback on a continual basis • Comfortable with Test Driven Development (TDD) • Worked in or willing to work a pair programming environment • Working towards a BA/BS in Computer Science or related field • Rising junior or senior in college Business Unit: Property & Casualty IT Services Benefits: Compensation varies by role, position level, and location. Individual pay is influenced by skills, education, training, certifications, experience, and the role's scope and complexity, along with business needs. We offer a competitive Total Rewards package, including medical, dental, and vision plans starting on day one, PTO, paid holidays, commuter benefits, an employee stock purchase plan, education reimbursement, paid parental leave/adoption assistance, and a 401(k) plan with company match. These benefits are available to eligible full-time and part-time employees. Your recruiter can provide more details about our total rewards and specific compensation ranges during the hiring process.

What You Will Do: * Direct and coordinate Intelligent Transportation Systems (ITS) maintenance activities, including CCTV, Dynamic Message Signs (DMS), fiber optics, and field related devices. * Serve as primary review for ITS project plans, cost estimates, and construction submittals. * Lead troubleshooting efforts for ITS projects, supervise field technicians, and coordinate with Districts and IT to solve issues. Who we are looking for: * Motivated person that takes pride in their work * The ability to multitask * Must be able to work in a fast paced, team focused environment Benefits To You: * Enjoy an excellent work/life balance. * Receive paid time off with vacation, sick and personal leave. * Receive 11 paid holidays per year. * Receive regular pay increases; 1 st increase after 6 months. * Receive an extensive benefits package; including Medical and FREE Vision, Dental and Basic Life Insurance after completion of eligibility period. * Experience growth opportunities within organization. * Participate in employee tuition reimbursement programs. * Receive a pension plan with 14% employer contribution. Why Work for the State of Ohio At the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: * Medical Coverage * Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period * Paid time off, including vacation, personal, sick leave and 11 paid holidays per year * Childbirth, Adoption, and Foster Care leave * Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) * Public Retirement Systems ( such as OPERS, STRS, SERS, and HPRS ) & Optional Deferred Compensation ( Ohio Deferred Compensation ) * Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position. Qualifications Licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 2 yrs. exp. as group or project leader or supervisor providing work direction & training to employees engaged in engineering projects or 2 yrs. exp. in managing engineering research projects (i.e., managing research projects applies only to staff specialist positions); if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license.-Or licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 12 mos. exp. as Transportation Engineer 3, 85643; if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license.-Or equivalent of Minimum Class Qualifications For Employment noted above may be substituted for the experience required, but not for the mandated registration. Job Skills: Civil Engineering Supplemental Information ALL ANSWERS TO THE SUPPLEMENTAL QUESTIONS MUST BE SUPPORTED BY THE WORK EXPERIENCE/EDUCATION PROVIDED ON YOUR CIVIL SERVICE APPLICATION. All bargaining unit and exempt new hires to ODOT must serve a one-year probationary period. If this position is filled internally, the wage rate will be determined in accordance with the Ohio Revised Code. This position has been designated as a Career Professional position per the Ohio Revised Code 5501.20.ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting. ","@type":"JobPosting","responsibilities":" Qualifications Licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 2 yrs. exp. as group or project leader or supervisor providing work direction & training to employees engaged in engineering projects or 2 yrs. exp. in managing engineering research projects (i.e., managing research projects applies only to staff specialist positions); if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license.-Or licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 12 mos. exp. as Transportation Engineer 3, 85643; if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license.-Or equivalent of Minimum Class Qualifications For Employment noted above may be substituted for the experience required, but not for the mandated registration. Job Skills: Civil Engineering Supplemental Information ALL ANSWERS TO THE SUPPLEMENTAL QUESTIONS MUST BE SUPPORTED BY THE WORK EXPERIENCE/EDUCATION PROVIDED ON YOUR CIVIL SERVICE APPLICATION. All bargaining unit and exempt new hires to ODOT must serve a one-year probationary period. If this position is filled internally, the wage rate will be determined in accordance with the Ohio Revised Code. This position has been designated as a Career Professional position per the Ohio Revised Code 5501.20.ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting. ","valid Through":"2026-02-07T00:00:00-05:00","title":"ITS Maintenance Engineer/ Transportation Engineer 4","date Posted":"2026-01-07T11:33:34-05:00"} Return to Search Results Expand Show Other Jobs Job Saved Save Job ITS Maintenance Engineer/ Transportation Engineer 4 Ohio Department of Transportation APPLY NOW Application First Name Last Name Email address Captcha / Bot check: Copy from here ...to here Click to hear these letters. What is this? Apply on Employer's Site The application opened in a new tab. You may close this popup. By using this feature you agree to our Terms and Conditions and Privacy Policy. Details Posted: 07-Jan-26 Location: Columbus, Ohio Type: Full Time Salary: $89,627-128,045 Categories: Civil Engineering Years of Experience: 2 - 4 Preferred Education: 4 Year Degree Internal Number: PN 20050643 What You Will Do: * Direct and coordinate Intelligent Transportation Systems (ITS) maintenance activities, including CCTV, Dynamic Message Signs (DMS), fiber optics, and field related devices. * Serve as primary review for ITS project plans, cost estimates, and construction submittals. * Lead troubleshooting efforts for ITS projects, supervise field technicians, and coordinate with Districts and IT to solve issues. Who we are looking for: * Motivated person that takes pride in their work * The ability to multitask * Must be able to work in a fast paced, team focused environment Benefits To You: * Enjoy an excellent work/life balance. * Receive paid time off with vacation, sick and personal leave. * Receive 11 paid holidays per year. * Receive regular pay increases; 1st increase after 6 months. * Receive an extensive benefits package; including Medical and FREE Vision, Dental and Basic Life Insurance after completion of eligibility period. * Experience growth opportunities within organization. * Participate in employee tuition reimbursement programs. * Receive a pension plan with 14% employer contribution. Why Work for the State of Ohio At the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: * Medical Coverage * Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period * Paid time off, including vacation, personal, sick leave and 11 paid holidays per year * Childbirth, Adoption, and Foster Care leave * Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) * Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) * Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position. Qualifications Licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 2 yrs. exp. as group or project leader or supervisor providing work direction & training to employees engaged in engineering projects or 2 yrs. exp. in managing engineering research projects (i.e., managing research projects applies only to staff specialist positions); if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license.-Or licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 12 mos. exp. as Transportation Engineer 3, 85643; if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license.-Or equivalent of Minimum Class Qualifications For Employment noted above may be substituted for the experience required, but not for the mandated registration. Job Skills: Civil Engineering Supplemental Information ALL ANSWERS TO THE SUPPLEMENTAL QUESTIONS MUST BE SUPPORTED BY THE WORK EXPERIENCE/EDUCATION PROVIDED ON YOUR CIVIL SERVICE APPLICATION. All bargaining unit and exempt new hires to ODOT must serve a one-year probationary period. If this position is filled internally, the wage rate will be determined in accordance with the Ohio Revised Code. This position has been designated as a Career Professional position per the Ohio Revised Code 5501.20.ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.

Ameritas Investment Partners (AIP) is seeking a Data Engineer Intern to contribute to data development and operation of an evolving Investment Data and Analytics ecosystem.This position will be responsible for contributing to the design, maintenance, and support of various data management activities in the AIP production environment. This is not a coding role with minimal people interaction. This position will be very communication heavy with plenty of stakeholder interaction where strong and clear communication skills will be critically important. AIP is a registered investment advisor managing more than $23 billion in assets under management for insurance companies, public and private pension funds, endowments, foundations, mutual funds and high net worth individuals. Position Location: This is a hybrid role (Lincoln, NE) working partially in-office and partially from home. Position Start Date: This internship would begin as soon as possible. What You Do: Design and configure data flows from automation to automated quality checks Identify, design, and implement internal process improvements, including automating manual processes, optimizing data delivery and more Build the infrastructure required for optimal extraction, transformation, and loading of data for consumption by portfolio managers and analysists Works with team to develop scalable, extensible solution architectures leveraging contemporary technologies in an evolving operational framework Participate in and help guide research of proof of concepts (POCs), including design, coding, and performance and efficacy measurement What You Bring: Actively enrolled at a college or university at least half-time as defined by your institution for the entire duration of the internship studying Computer Science, Computer Engineering, Information Technology, Management Information Systems, Statistics, or related field Ability to commit to a 12-month internship working full-time during the summer and part-time during the school year Full-time hours: 30-40 hours per week Part-time hours: 15-20 hours per week includes Must have a minimum GPA of 3.25 Proficienct in Python and SQL preferred. Other technologies used: Data Quality & validation automation Amazon Web Services Bloomberg APIs Open Source Tools such as R MS.Net Splunk Machine Learning and/or Dataiku Must have at least a basic understanding of statistical concepts including percentiles, confidence intervals, correlation. Understanding of investment statistics such as beta, covariance a plus but not required. Strong interpersonal and professional skills, including the ability to ask thoughtful questions, communicate effectively, demonstrate punctuality, and consistently produce high-quality work. Desire to research and learn new technologies and frameworks including programming languages Exposure to RDMS and No-SQL type databases a plus What we offer Our company motto is “Fulfilling Life” and we take that job seriously, with a heavy commitment to volunteering and community support, employee well-being, and providing quality products and services that help our customers create a brighter future. Being a mutual-based organization, the return on our investment goes back into the company, to benefit our members/customers. We're committed to professional development, opportunity, inclusion, and diversity. Team building and collaboration are also priorities. An Equal Opportunity Employer: Ameritas has a reputation as a company that cares, and because everyone should feel safe bringing their authentic, whole self to work, we're committed to an inclusive culture and diverse workplace, enriched by our individual differences. We are an Equal Opportunity/Affirmative Action Employer that hires based on qualifications, positive attitude, and exemplary work ethic, regardless of sex, race, color, national origin, religion, age, disability, veteran status, genetic information, marital status, sexual orientation, gender identity or any other characteristic protected by law.

**Job details** **General information** **Entity** Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Electrical & Power is one of the world's leaders in aircraft electrical systems. The company is a key player in equipment electrification and in the electric and hybrid propulsion sector. It has over 14,000 employees across 13 different countries. **Reference number** 2025-153420 **Job details** **Domain** Research, design and development **Job field / Job profile** Mechanics - Mechanical part or subassembly design **Job title** Mechanical Engineer II **Employment type** Permanent **Professional category** Professional, Engineer & Manager **Part time / Full time** Full-time **** Summary The Mechanical Engineer II is responsible for the design, development, analysis and technical support of the AC and DC air-cooled and oil-cooled generators within the design-engineering department. This includes all phases of the project including but not limited to proposals, development, testing and production support. Job Location: Twinsburg, Ohio Essential Duties and Responsibilities - Designs the individual parts and assemblies of a rotating machine in order to meet the customer requirements and targeted performances with support from a lead engineer or equivalent. - Develops CAD 3D models and 2D drawings, conduct analysis necessary for the design effort of the rotating machine and associated parts: tolerance stack-up, bearing load and pre-load calculations, etc. - Ensures designs are in accordance with the SAFRAN and industry standards including but not limited to GD&T, design for manufacturing. - Acts as a peer reviewer and supports and participates in technical reviews (design, manufacturing, test, etc.) and makes suggestions to resolve issues or mitigate risks - Adheres to and follow the budget and schedule provided by the business - Reviews customer specifications and supports technical proposals, cost estimates, test procedures and specifications, process qualification procedures, status reports, technical reports, and schedules as needed. - Initiates actions to solve problems for ongoing products or for new product designs - Communicates openly and transparently to peers and management on design progress and on any difficulty ies or risks in order to address them as early as possible in the development - Provide assistance and support testing of new and legacy products with guidance from a lead engineer - Adheres to safe work practices and contributes to the evolution of the health, safety, and environmental programs and culture - Travel requirements: Occasional travel (general guideline, once per quarter) within the U.S./Outside the U.S. - Evening/night hours may be required - Extra hours may be required during business peaks Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: - Minimum of Bachelor's Degree in Mechanical Engineering, or equivalent - Minimum of four (4) years of mechanical engineering experience in a new product design and manufacturing environment **But what else? (advantages, specificities, etc.)** Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job posting does not constitute a written or implied contract of employment. This position requires access to technologies and hardware subject to US national security based export control requirements. All applicants must be US Persons (8 USC 1324b(a)(3)), or otherwise authorized by the U.S. Government. No company sponsorship will be offered. This description has been designed to indicate the general nature and level of work performed by an employee within this position. The actual duties, responsibilities and qualifications may vary based on assignment or group. All qualified applicants will receive consideration for employment without regard to race, color, age, ethnicity, religion, sex, sexual orientation, gender identify, national origin, disability, veteran status, genetic data or other legally protected status. Safran Electrical and Power is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. To verify the information in the job listing or if you need special assistance or an accommodation while seeking employment, please call : ************. We will decide on your request for reasonable accommodation on a case-by-case basis **Candidate skills & requirements** Knowledge/Skills: - Experience with Rotating Machines design (motors, generators, etc.), design principles, creating and interpreting blueprints, drawings including GD&T - Technical judgement on various mechanical engineering disciplines - Demonstrated problem solving skills - Interpersonal skills and an ability to work with individuals/teams at all levels within the organization and with customers - Strong organizational, administrative and reporting skills - Experience in CAD 3D models and 2D drawings - Proficient in MS Office - Experience with basic tooling including measuring equipments Preferred Skills : - Design of Bearing system - Design of wound components - Rotor Dynamics - Oil and air cooling - DO160, ARP4754A & ARP4761 familiarity - Experience with CATIA Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - While performing the duties of the position, this role will be regularly required to stand, walk sit, lift, use hands and fingers, handle and feel, reach with hands and arms and observe with naked eye or via various instruments. - This role will occasionally be required to lift and/or move objects up to 30 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - The work environment is mainly in office but depending on the phase of the project could be split between office and testing or production floor areas. The environment in some areas may requires wearing PPE or other equipment. Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description does not constitute a written or implied contract of employment. **Annual salary** n/a **Job location** **Job location** North America, United States, Ohio **City (-ies)** Twinsburg **Applicant criteria** **Minimum education level achieved** Bachelor's Degree **Minimum experience level required** More than 3 years

College Intern - Engineering Summer 2026 (2500098F) Organization: Transportation - District 09Agency Contact Name and Information: Bonnie HallUnposting Date: OngoingWork Location: District 9 HQ 650 Eastern Avenue Chillicothe 45601Primary Location: United States of America-OHIO-Ross County-Chillicothe Compensation: See Supplemental InformationSchedule: Part-time Work Hours: Operational NeedsClassified Indicator: UnclassifiedUnion: Exempt from Union Primary Job Skill: InternshipTechnical Skills: Civil EngineeringProfessional Skills: Adaptability, Critical Thinking, Problem Solving, Teamwork Agency OverviewWho We Are:The Ohio Department of Transportation (ODOT) oversees building and maintaining the nation's 5th largest interstate system and the 3rd largest number of bridges. We take pride in providing safe and efficient roadways for the people of Ohio and to the people traveling within our great state. And in order to achieve that, we do A LOT! From Planning, Engineering, Construction to Law, HR, Communications, IT and everything in between, ODOT has a career for just about everyone. ODOTers are hardworking, passionate, and dedicated to public service. WE strive to achieve our agency's vision every day: To be a long term, reliable, professional, and highly productive organization. ODOT's Mission Statement: To provide a transportation system that is safe, accessible, well maintained, and positioned for the future. Job DescriptionBenefits to You:• PAID Internship with the rate based on your rank in school• Real world experience• Work side-by-side with ODOT experts• The opportunity to work on an important mission while applying the knowledge you have gained through your education Position Description:Under supervision in the Planning Section, student will receive training and assist with a variety of planning activities involving traffic engineering studies (e.g. prepares and reviews information on highway safety and speed zones; conducts traffic counts; collects and reviews field data; verifies sign locations and pavement marking locations; photographs site of proposed projects; researches and analyzes accidents and traffic signal warrants; participates in field reviews and project scoping). Assists in the scanning of plans and documents in the permits database. Assists in the processing of legislation issues and MPO matters. Assists in the Environmental area concerning the selection of potential noise walls for study, takes noise readings and updates the data base. Performs field work on selected safety locations including speed studies, pavement marking, sign and signal location. Enter and manipulate data base for environmental noise walls, safety and congestion locations and bridge conditions.Under supervision in the Engineering Section, student will receive training in PC based and mainframe CADD systems (i.e. MicroStation and OpenRoads Designer); as well as, various software packages used by the District. Collect and reviews roadway, culvert, and bridge field data required for the preparation of highway construction plans. Assists project manager or designer with the design, development, and review of various portions of highway construction plans. Assists project surveyor on projects, receives training in the operation and maintenance of survey instruments (e.g. total stations, GPS receivers, digital levels, 3-D laser scanners and data collectors) and survey applications, to, complete highway survey projects. Assists project surveyor with gathering of necessary field supplies and equipment and takes notes and records of survey data obtained. Performs miscellaneous duties to facilitate operational efficiency of work unit (e.g. researches plans and records; assists with necessary record keeping; maintains accurate data of work performed; organizes materials and compiles information to assist in report preparation; attends training).Under supervision in the Construction Section, student will receive training in proper procedures for inspection of work being done by contractors (e.g. widening and resurfacing projects, safety upgrading, signing, guardrail, intersections, drainage facilities, forms and reinforcing steel, concrete placement on structures, flexible and rigid pavement). Assists project engineer in the inspection of bituminous plants, performs test on concrete and soils, and in any required surveying to verify field measurements. Performs support functions in record keeping, maintains accurate data of work performed, organizes materials, and compiles information to assist in report preparation.Under supervision in the Environmental Section, assists the Environmental staff with projects & documentation by utilizing the computer & related software (e.g., internet, web pages for ODOT, Ohio Department of Natural Resources (ODNR), Environmental Protection Agency (EPA); ELLIS, Microsoft Word, Excel & Outlook) to research information (e.g., National Environmental Policy Act (NEPA), Environmental Justice Maps, Categorical Exclusions, upcoming projects, submerged land leases, lake lines, city limits), to pull maps, generate reports, create lists (e.g., public involvement requirements, mussel stream) & data bases (e.g., permits, flood plain).Why Work for the State of OhioAt the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period. Paid time off, including vacation, personal, sick leave and 11 paid holidays per year Childbirth, Adoption, and Foster Care leave Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) *Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position.QualificationsMUST BE ENROLLED IN A COLLEGE OR UNIVERSITY PROGRAM AND IN GOOD ACADEMIC STANDING. (Civil Engineering) Must show proof of valid driver's license to operate state vehicle.This position is unclassified per Section 124.11(A)(29).Supplemental InformationThis is a temporary position involving various duties that will supplement the student's major field of study &/or provide experience that is a useful addition to the student's education & meaningful preparing for future professional employment.Rate of pay is based upon the student's academic status (determined by the college or university):· Freshman & Sophomore - $19.50/hour· Junior & Senior - $20.00/hour· Graduate Students - $24.00/hour ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs, and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Charter Steel is hiring a Materials Engineer Intern! At Charter, we believe our culture is our strongest competitive advantage. Join our team, where you'll take on impactful projects, gain hands-on experience, and grow both personally and professionally. What Sets Our Internship Program Apart: Impactful Work & Growth: Contribute to meaningful projects that drive company goals while developing skills through mentorship, training, and networking. Compensation Benefits: Competitive compensation, receive weekly pay, and paid holidays. Career Advancement: Explore full-time employment opportunities across our four business divisions and corporate office, with adjusted service time if hired after graduation. Recognition & Culture: Join a workplace that celebrates achievements, values contributions, and invests in your future. Program Highlights: Experience our Intern Kickoff Day , Volunteer Opportunities , Professional Development Workshops , and the End of Summer Intern Showcase . Program Structure: Duration/Schedule: Flexible part-time during the school year and full-time during the summer months. Location: Cleveland - Onsite Start Date: January 2026 What We're Looking For: Enrollment in a four-year degree program in Materials Science, Metallurgical Engineering, Mechanical Engineering or a related field with current status of at least a Sophomore level. Cumulative GPA of 2.75 or higher. Proficient in Microsoft Office software: Excel, Word, and PowerPoint. Strong verbal and written communication skills. Strong interpersonal and relationship building skills. Ability to succeed in a team environment. Ability to handle multiple tasks. Preferred Experience: Experience with Auto CAD and Pro-E. What You'll Focus On: Participate in Continuous Improvement projects. Assist in other projects and function as a resource for other team members. Participate in the fundamentals of product design and development including testing using a variety of tools and equipment. Refine slag analysis and standardization. Document and improve processes. Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description. Follow Environmental, Quality and Safety Management System procedures and requirements. #LI-AF1 #LI-Onsite Internship positions are not benefits-eligible.

Benefits: * Bonus based on performance * Dental insurance * Employee discounts * Flexible schedule * Free uniforms * Health insurance * Opportunity for advancement * Paid time off * Training & development * Vision insurance Schedule: Part-Time (flexible around class schedule) About BuildPro Sign Solutions BuildPro Sign Solutions is the construction signage division of FASTSIGNS Westerville. We provide high-quality signage for commercial and residential projects. Our division is growing quickly, and we are looking for students or early-career candidates who want hands-on experience in construction signage estimating. The Role This internship is your pathway to a full-time Project Estimator role. You will assist with preparing estimates, maintaining project documentation, and learning the workflows and systems that make a construction signage business run efficiently. You will: * Assist with preparing project estimates and proposals. * Learn to use standardized pricing catalogs and estimating tools. * Support the Fastsigns / BuildPro team with data entry, research, and documentation. * Help improve workflow and efficiency for repeatable projects. * Gain knowledge of materials, project coordination, and estimating best practices. Qualifications: * Current student or recent grad at a local community college, tech school, or similar program. * Confident, conscientious, detail-oriented, and motivated to learn. * Comfortable with numbers, spreadsheets (Excel), and technology. * Strong organizational skills and willingness to handle high-volume, repetitive tasks. * Team-oriented and willing to follow detailed instructions. Why You'll Love It Here: * Paid internship with hands-on learning. * Mentorship from experienced estimator and project managers. * Exposure to real-world construction signage projects. * Clear pathway to full-time employment after graduation. To Apply: Send your resume and a brief cover letter explaining why you care about accuracy and learning the trade.

ITS Maintenance Engineer/ Transportation Engineer 4, PN 20050************0) Organization: Transportation - Central OfficeAgency Contact Name and Information: Keia Dover- ************************** Unposting Date: Jan 17, 2026, 4:59:00 AMWork Location: Ohio Dept of Transportation 1980 West Broad Street 4th Floor Columbus 43223Primary Location: United States of America-OHIO-Franklin County Compensation: $43.09 - $61.56Schedule: Full-time Work Hours: 07:30 AM To 04:30 PMClassified Indicator: ClassifiedUnion: Exempt from Union Primary Job Skill: Civil EngineeringTechnical Skills: EngineeringProfessional Skills: Active Learning, Attention to Detail, Decision Making Agency Overview Job DutiesITS Maintenance Engineer/ Transportation Engineer 4, PN 20050643What You Will Do:Direct and coordinate Intelligent Transportation Systems (ITS) maintenance activities, including CCTV, Dynamic Message Signs (DMS), fiber optics, and field related devices.Serve as primary review for ITS project plans, cost estimates, and construction submittals.Lead troubleshooting efforts for ITS projects, supervise field technicians, and coordinate with Districts and IT to solve issues. Who we are looking for:Motivated person that takes pride in their work The ability to multitask Must be able to work in a fast paced, team focused environment Benefits To You:Enjoy an excellent work/life balance.Receive paid time off with vacation, sick and personal leave.Receive 11 paid holidays per year.Receive regular pay increases; 1st increase after 6 months.Receive an extensive benefits package; including Medical and FREE Vision, Dental and Basic Life Insurance after completion of eligibility period.Experience growth opportunities within organization.Participate in employee tuition reimbursement programs.Receive a pension plan with 14% employer contribution.Why Work for the State of OhioAt the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period Paid time off, including vacation, personal, sick leave and 11 paid holidays per year Childbirth, Adoption, and Foster Care leave Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) *Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position.QualificationsLicensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 2 yrs. exp. as group or project leader or supervisor providing work direction & training to employees engaged in engineering projects or 2 yrs. exp. in managing engineering research projects (i.e., managing research projects applies only to staff specialist positions); if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license. -Or licensed as registered professional engineer by Ohio State Board of Registration for Professional Engineers & Surveyors; 12 mos. exp. as Transportation Engineer 3, 85643; if assigned to operate a state vehicle to travel to & inspect project sites, must possess valid driver's license. -Or equivalent of Minimum Class Qualifications For Employment noted above may be substituted for the experience required, but not for the mandated registration. Job Skills: Civil EngineeringSupplemental InformationALL ANSWERS TO THE SUPPLEMENTAL QUESTIONS MUST BE SUPPORTED BY THE WORK EXPERIENCE/EDUCATION PROVIDED ON YOUR CIVIL SERVICE APPLICATION.All bargaining unit and exempt new hires to ODOT must serve a one year probationary period.If this position is filled internally, the wage rate will be determined in accordance with the Ohio Revised Code. This position has been designated as a Career Professional position per the Ohio Revised Code 5501.20.ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.

Applied Optimization (AO) Job Title: Mechanical Engineering Intern Reports to: Principal Scientist FLSA Status: Part Time (Non-Exempt) To support an interdisciplinary research and development team that collects data, analyzes experimental data, and implements new generation scientific algorithms in the areas of mechanical engineering and material science, or space science. Essential Functions: Conduct numerical modeling, mathematics support, and computer programming Support resolution of software issues and requests from customers Support the troubleshooting and debugging of software Assist with enhancement of software functionality Maintain positive customer relations, to include projects status updates Interpret blueprints, technical drawings, schematics, and computer-generated reports Ensure accuracy and follow documentation procedures for all work; maintain notebook of daily activities and provide weekly report of work Other duties as assigned Required Qualifications: Undergraduate or graduate student enrolled in a program related to the field of mechanical engineering with a superior academic record General understanding of software development and knowledge of various coding languages Attention to detail and effective time and schedule management skills Effective organizing, planning, debugging, and problem-solving skills Ability to adapt within a small team to support evolving customer requirements Ability to execute instructions and communication in written, oral, and diagram form Demonstrated strong writing, fact-gathering, and analytical skills Basic computer and software skills including but not necessarily limited to Microsoft Office products (e.g., Outlook, Word, Excel, and Power Point) Preferred Qualifications: College sophomore or junior with a cumulative GPA (Grade Point Average) of 3.5 or higher A minor degree or dual degree in mathematics, computer science, computer engineering, or physics Knowledge or experience in C++ object modeling/software development, MATLAB programming, or other coding languages Ability to occasionally work 2nd shift preferred Citizenship/Security Clearance Requirements: U.S. Citizen or Green Card Holder May be required to obtain and maintain U.S. Government Security Clearance About Our Internships: Hours: The internship is a part-time, year-round position that requires a minimum of sixteen hours per week of work. The hours are flexible and they can change from one semester to another based on the students class schedule. The weekly hours can be adjusted to balance for the examinations, tests and project submissions. About Us: Applied Optimization is a growing organization located in Fairborn, OH. We are an equal opportunity employer offering a competitive salary that is commensurate with qualifications and a comprehensive benefits package. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. Find out more about us at ***************** This job description is subject to change.

Job Description ---VISA SPONSOSHIP NOT AVAILABLE. About Us: Gasser Chair is a distinguished leader in the design and manufacturing of premium seating solutions, proudly trusted by some of the world's most iconic brands, including Wynn, Caesars, Ritz-Carlton, and Hilton. Renowned for our unwavering commitment to excellence and innovation, we design and produce custom seating solutions that seamlessly blend style, comfort, and durability, setting the standard in quality and design. Founded in 1946, Gasser Chair has a rich history rooted in skill and ingenuity. As a third-generation, family-owned business, we have grown from a small operation to a global brand while staying true to our values of quality, integrity, and customer focus. With decades of expertise and a passion for innovation, we continue to redefine what is possible in custom seating solutions. We encourage you to visit our website at ******************* to learn more about our history, explore our product offerings, and discover how we bring our legacy of craftmanship and innovation to every project we undertake. Our Core Values: At Gasser Chair, our core values define who we are and how we operate. We are committed to being Respectful, creating a welcoming and supportive environment; Accountable, working together to ensure success; Process-Driven, dedicated to following and improving best practices; and Adaptable, embracing positive change. These values are not just words - they are the heart of how we work and grow together. We look for team members who share these principles and bring them to life every day. When you join Gasser Chair, you become part of a team that values collaboration, dedication, and a commitment to doing great work. Your success here starts with embracing our core values and contributing to a culture where everyone thrives. Job Title: Mechanical Engineering Intern - Manufacturing Location: Gasser Chair Company Plant Job Type: Internship (Full-Time/Part-Time) Duration: Summer 2025 Department: Manufacturing Engineering Reports To: Director of Engineering --- About the Role: We are seeking a Mechanical Engineering Intern to join our manufacturing engineering team. This role offers hands-on experience supporting production processes, equipment optimization, and continuous improvement initiatives. As an intern, you'll work alongside experienced engineers to solve real manufacturing challenges and gain valuable exposure to lean manufacturing, process design, and plant operations. --- Key Responsibilities: · Assist in designing, testing, and implementing mechanical systems and process improvements on the production floor. · Support continuous improvement efforts through time studies, root cause analysis, and efficiency audits. · Participate in the design and development of jigs, fixtures, and tooling to enhance manufacturing performance. · Help maintain and update technical documentation such as process instructions, CAD drawings, and equipment manuals. · Collaborate with maintenance, quality, and production teams to identify and resolve operational issues. · Collect and analyze production data to identify trends and recommend improvements. · Ensure compliance with safety and quality standards in all tasks. --- Qualifications: · Currently pursuing a Bachelor's degree in Mechanical Engineering or a related field. · Solid understanding of mechanical engineering fundamentals. · Familiarity with CAD software (e.g., SolidWorks, AutoCAD) and Microsoft Office tools. · Strong analytical, problem-solving, and communication skills. · Ability to work effectively in a fast-paced manufacturing environment. · Eagerness to learn and contribute to a team-oriented setting. ---VISA SPONSOSHIP NOT AVAILABLE. --- Preferred Qualifications: · Coursework or prior experience in manufacturing processes, industrial engineering, or lean systems. · Familiarity with Six Sigma or lean manufacturing principles. · Hands-on experience with machining, assembly, or fabrication (through labs, projects, or previous internships). Upon an offer of employment, a background and drug screen are required.