Mechanical engineering internship jobs in Mission Viejo, CA

Epirus is a high-growth technology company developing software-defined high-power microwave (HPM) systems with devastating counter-electronics effects on modern drone threats. The Epirus Leonidas HPM family of products, empowered by innovations in AI and microelectronics, is human-safe and cost-effective. Distinguishing itself from lasers, Leonidas excels against drone swarms while also bending the cost curve back in DoD's favor - taking drone defeat costs from millions of dollars per drone to pennies on the dollar. Job Summary: This is an exciting role in a growing company. We are looking for interns to join us on a 10-week internship program. This will be a hands on and in-person position. Basic Qualifications: Pursuing a Bachelors degree in Mechanical Engineering, or any related field Rising senior or beyond at time of internship and have a graduation date between 12/2026 - 12/2027. All applicants should be returning to school at the end of their internship to continue their academic studies. Prior internship, collegiate project team, or laboratory experience CAD experience (any platform) U.S. Person status is required as this position needs to access export-controlled data ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. People are the most important part of Epirus - and always come first. We don't believe in the word impossible and are always asking "why not" as work to usher in a new paradigm of power efficiency. Our fast-growing team is agile, creative, and innovative. We support a culture of constant learning and sense of belonging among our team members and know that mentorship matters. We embrace diversity, equity and inclusion in the workplace and beyond. To deliver on our mission, we are always looking for problem solvers, changemakers and innovators to join our fast-growing team. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $36-$38 USD

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low-Earth orbit in 2026. It is part of our stepping stone approach to continuous human presence in LEO. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast offers an advanced engineering internship program with hands-on opportunities to design and build space hardware and software. You will play a crucial role in the development of the systems that will be required for the operation of artificial-gravity human-rated space stations. We have four engineering internship postings (Mechanical / Aerospace, Manufacturing, Electrical, and Software). Please only apply to the most relevant posting for your background. Our interns are mentored by industry experts to solve challenging real-world engineering problems across our hiring teams. This is a 12 week internship at our offices in Long Beach, CA or Hawthorne, CA or Mojave, CA. Responsibilities will vary depending on each intern's area of expertise. We are currently looking for candidates with experience in the the following engineering disciplines: Avionics Structures Structures Testing ECLSS (Environmental Control and Life Support Systems) Thermal Flight Safety & Mission Assurance Materials & Processes Mission Operations Hardware Development Propulsion Propulsion Testing E-2 Minimum Qualifications: Qualified candidates must be enrolled in a Bachelor's or Master's degree program from an accredited college or university in mechanical engineering, aerospace engineering, or other related engineering discipline. Ability to work full-time onsite in Long Beach, CA or Hawthorne, CA Preferred Qualifications: Application of technical skills outside of the classroom (examples include: extracurricular projects, volunteering, personal projects, laboratory research, or prior internship/work experience) Proficiency in CAD software (e.g., SolidWorks, CATIA) for 3D modeling and simulation Attention to detail Strong engineering problem solving capabilities Basic knowledge of engineering and equipment Prior knowledge of analysis tools Ability to collaborate across different teams Self-directed with a positive attitude and team spirit Pay Rate: Engineering Intern, Undergraduate: $35/hr Engineering Intern, Master's: $40/hr Pay Range: California$35-$40 USDCOMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

About Varda Low Earth orbit is open for business. Varda is accelerating the development of commercial space infrastructure, from in-orbit pharmaceutical processing to reliable and economical reentry capsules. From life-saving pharmaceuticals to more powerful fiber optics, there is a world of products used on Earth today that can only be manufactured in space. Varda is accelerating innovation in the orbital economy by creating both the products and infrastructure needed so space can directly benefit life on Earth. Our mission is to expand the economic bounds of humankind. Our team is uniquely suited to accomplishing this goal, with leadership and staff comprised of veterans from SpaceX, Blue Origin, major pharmaceutical companies and Silicon Valley. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital. Varda is headquartered in El Segundo, California, where we have offices and a production facility where our vehicles, equipment, and materials are built, integrated, and tested. Varda also has offices in Washington, DC and Huntsville, AL (coming soon). Join Varda, and work to create a bustling in-space ecosystem. About This Role Summer internships will range between the months of May and August. All dates dependent upon the university schedule of the selected students. Internships are full-time and on-site in Los Angeles, CA. The Varda Mechanical Engineering Internship provides an opportunity to work on critical spaceflight hardware and ground support systems, contributing directly to our in-space manufacturing and reentry missions. Interns will join a fast-paced team environment, collaborating on design, analysis, and test efforts for both flight and non-flight hardware. Internships at Varda are optimal for students looking to grow technically and professionally while working on impactful projects critical to the company's success. You will be working on a collaborative team in a startup environment while being able to learn from some of most accomplished and experienced aerospace professionals in the world. We're dedicated to providing an experience that will let your decisions and contributions help drive Varda's success. Responsibilities Contribute to the design and development of spacecraft hardware or ground support equipment (MGSE) Support test campaign planning and execution, including test stand design and data analysis Create CAD models, detailed drawings, and perform basic engineering analysis (FEA, thermal, etc.) Participate in design reviews and collaborate with multidisciplinary teams to meet hardware requirements Perform hands-on fabrication tasks or support machining operations when needed Basic Qualifications Currently enrolled in a bachelor's degree program in Engineering or Physics (Mechanical, Aerospace, or related field) Strong understanding of core engineering concepts, with completed coursework in: Statics Dynamics Mechanics of Materials Thermodynamics or Heat Transfer Experience using engineering tools such as CAD (e.g., NX), MATLAB, and/or LabVIEW Proven ability to own and deliver a technically complex project, preferably in a team setting (e.g., FSAE, senior design, rocket team, etc.) Strong written and verbal communication skills and ability to thrive in a team-oriented environment Preferred Skills And Experience Junior or Senior academic standing Previous internship or co-op experience in a technical role Experience with fabrication or machining (manual or CNC) Familiarity with NX, GD&T, Femap/Nastran, or similar engineering tools Background in space systems, spacecraft structures, or aerospace manufacturing processes Demonstrated success in technical extracurriculars (e.g., Rocket Club, Formula SAE, etc.) Projects You May Work On Intern projects will be tailored to company needs and student skillsets closer to the start date. Typical projects include: Mechanical Ground Support Equipment (MGSE) design Tooling design and fabrication support Test setup development and execution Flight hardware upgrades and modifications Generative design applications for spacecraft components ITAR Requirements Varda, like all employers, must ensure that its employees working in the United States are lawfully authorized to work in the U.S. Additionally, our employees are exposed to and have access to certain export-controlled items. At present, some of our technology to which employees have access requires a license to be exported to individuals other than “U.S. Persons” as defined in U.S. export regulations. Because our employees are provided access to export-controlled items, our current policy is to only hire “U.S. persons” who are permitted to have access to our technology without an export license. “US person” means: U.S. citizen, U.S. lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) (i.e., individual admitted to the U.S. as a refugee or granted asylum in the U.S.) Learn more about the ITAR here. Benefits Exciting team of professionals at the top of their field working by your side Equity in a fully funded space startup with potential for significant growth (interns excluded) 401(k) matching (interns excluded) Unlimited PTO (interns excluded) Health insurance, including Vision and Dental Lunch and snacks provided on site every day. Dinners provided twice a week. Maternity / Paternity leave (interns excluded) Varda Space Industries is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, martial status, mental or physical disability, or any other legally protected status. E-Verify Statement Varda Space Industries, Inc. participates in the U.S. Department of Homeland Security E-Verify program. The E-Verify program is an Internet-based employment eligibility verification system operated by the U.S. Citizenship and Immigration Services. Learn more about the E-Verify program. E-Verify Notice Right To Work Notice Read more Read more

The AmphenolCDI Mechanical Engineering position is a leader and contributor for activities related to the implementation and use of Lean / COS activity in the facility. This position is expected to use engineering principles and tools to identify areas for opportunity, support and contribute to the team to analyze data and implement improvements. This position will help lead the team to drive down costs, control variation, and improve processes. Reporting to the COS Manager, part of the team that will drive continuous improvement in the facility. In addition, this position will provide full-time environmental health and safety support to the operations of the factory and will ensure that all practices are in compliance with Federal, State and CDI regulatory requirements. ESSENTIAL JOB FUNCTIONS Provide overall support and contribution in COS problem solving to the team. Significant problem-solving involving changes in products, processes and equipment leading to improvement to improve the business. Assisting in the development of new processes including, standard work, Product Instructions and Manufacturing Instructions Practice safe working techniques and re-enforce the safety policies, guidelines, and procedures as set out by the Company. Provide daily guidance and direction in EHS programs at the employee / supervisor level to ensure a common and effective approach Ensure that contractor personnel working on the property are in compliance with CDI policies and safety requirements. Provide advice, assist, and audit line management to ensure that effective EHS is implemented and working. Perform and contribute to the Site Training Plans by conducting employee orientations; emergency response training; and coordination of modular training programs for the operation. Assist with maintaining the Site Preparedness and Emergency Plans & Procedures Assist in evaluating new tools, equipment, and processes to aid in production efficiency and safety Providing data and analysis to drive CAPEX decisions Competency in tools such as 8D, PFMEA, DMEA, Root Cause Analysis, etc. Participate in and lead Continuous Improvement events Review accidents and incidents which occur in the area of responsibility and conduct field audits, reporting and managing the corrective actions. Maintain filing systems regarding worker training and safety. Maintain working relationships with Regulatory Agencies and chair or co- chair and lead the Safety Committee for the Operation. * Other duties as required in support of the department and the company* SUPERVISOR RESPONSIBILITIES Non-Supervisory Role The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 0-1 years of experience in engineering and continuous improvement and an understanding of electromechanical assembly and test; wire harness manufacturing, RF cable, RF connector build and test familiarity a plus Demonstrated analytical, problem solving, and change management skills in complex organizations Dynamic communication skills with ability to work at all levels of an organization including briefings to senior leaders Preferred experience in Environmental Health and Safety role Has or willing to obtain EH&S Certification or Training Excellent computer skills, including MS Office and Minitab EDUCATION and EXPERIENCE Bachelor's degree required in Engineering or other STEM background CERTIFICATES, LICENSES, REGISTRATIONS Six Sigma Green Belt a plus with award certification through ASQ or an equivalent body. Progress toward Green Belt certification may be considered with appropriate level of expertise and experience LANGUAGE REQUIREMENTS Excellent verbal and written communication skills in English. Conversational in any other language is a plus. JOB SKILLS The ability to work with mathematical concepts such as probability and statistical inference. Proficient written and verbal communication skills. Team player and able to build and maintain relationships both internal and external. Flexible to change and open to constructive feedback. Strong organizational and interpersonal skills. Able to work independently with minimal supervision. PHYSICAL DEMANDS As part of their job duties, the employee must sit for lengthy periods while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to stand, walk, reach, and occasionally lift objects weighing up to twenty (20) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Amphenol CDI is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL Approximately 0-5% of travel is expected. SALARY INFORMATION: According to several states' laws, this position's salary is $25 an hour. However, this salary information is merely a general guideline. When extending an offer, AmphenolCDI considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations.

**Company Information** Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect solutions to industries like Aerospace, Military & Defense Electronics, Space, Medical, Test & Measurement, and Industrial. Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. At Amphenol CIT, we make the amazing possible. Take the next step to become an integral part of our team by applying today and kickstart your journey with us. **SUMMARY** The AmphenolCDI Mechanical Engineering position is a leader and contributor for activities related to the implementation and use of Lean / COS activity in the facility. This position is expected to use engineering principles and tools to identify areas for opportunity, support and contribute to the team to analyze data and implement improvements. This position will help lead the team to drive down costs, control variation, and improve processes. Reporting to the COS Manager, part of the team that will drive continuous improvement in the facility. In addition, this position will provide full-time environmental health and safety support to the operations of the factory and will ensure that all practices are in compliance with Federal, State and CDI regulatory requirements. **ESSENTIAL JOB FUNCTIONS** + Provide overall support and contribution in COS problem solving to the team. + Significant problem-solving involving changes in products, processes and equipment leading to improvement to improve the business. + Assisting in the development of new processes including, standard work, Product Instructions and Manufacturing Instructions + Practice safe working techniques and re-enforce the safety policies, guidelines, and procedures as set out by the Company. + Provide daily guidance and direction in EHS programs at the employee / supervisor level to ensure a common and effective approach + Ensure that contractor personnel working on the property are in compliance with CDI policies and safety requirements. + Provide advice, assist, and audit line management to ensure that effective EHS is implemented and working. + Perform and contribute to the Site Training Plans by conducting employee orientations; emergency response training; and coordination of modular training programs for the operation. + Assist with maintaining the Site Preparedness and Emergency Plans & Procedures + Assist in evaluating new tools, equipment, and processes to aid in production efficiency and safety + Providing data and analysis to drive CAPEX decisions + Competency in tools such as 8D, PFMEA, DMEA, Root Cause Analysis, etc. + Participate in and lead Continuous Improvement events + Review accidents and incidents which occur in the area of responsibility and conduct field audits, reporting and managing the corrective actions. + Maintain filing systems regarding worker training and safety. + Maintain working relationships with Regulatory Agencies and chair or co- chair and lead the Safety Committee for the Operation. _*Other duties as required in support of the department and the company*_ **SUPERVISOR RESPONSIBILITIES** **Non-Supervisory Role** The responsibilities of this role do not include supervising other employees. **QUALIFICATIONS** + To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. + 0-1 years of experience in engineering and continuous improvement and an understanding of electromechanical assembly and test; wire harness manufacturing, RF cable, RF connector build and test familiarity a plus + Demonstrated analytical, problem solving, and change management skills in complex organizations + Dynamic communication skills with ability to work at all levels of an organization including briefings to senior leaders + Preferred experience in Environmental Health and Safety role + Has or willing to obtain EH&S Certification or Training + Excellent computer skills, including MS Office and Minitab **EDUCATION and EXPERIENCE** + Bachelor's degree required in Engineering or other STEM background **CERTIFICATES, LICENSES, REGISTRATIONS** + Six Sigma Green Belt a plus with award certification through ASQ or an equivalent body. Progress toward Green Belt certification may be considered with appropriate level of expertise and experience **LANGUAGE REQUIREMENTS** + Excellent verbal and written communication skills in English. + Conversational in any other language is a plus. **JOB SKILLS** + The ability to work with mathematical concepts such as probability and statistical inference. + Proficient written and verbal communication skills. + Team player and able to build and maintain relationships both internal and external. + Flexible to change and open to constructive feedback. + Strong organizational and interpersonal skills. + Able to work independently with minimal supervision. **PHYSICAL DEMANDS** As part of their job duties, the employee must sit for lengthy periods while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to stand, walk, reach, and occasionally lift objects weighing up to twenty (20) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. **WORK ENVIRONMENT** A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. **ENVIRONMENTAL POLICY** Amphenol CDI is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. **PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS** + ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. + Clear ANSI Z87.1 safety-rated glasses in specific areas. + Hearing protection in specific locations. + Ability to compile with JSA in specific areas. **EXPORT COMPLIANCE DISCLAIMER** This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). **TRAVEL** Approximately **0-5** % of travel is expected. **SALARY INFORMATION:** According to several states' laws, this position's salary is **$25** an hour. However, this salary information is merely a general guideline. When extending an offer, AmphenolCDI considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. AMPHENOL CIT RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." THE AFOREMENTIONED JOB REQUIREMENTS ARE SUBJECT TO CHANGE TO REASONABLY ACCOMMODATE QUALIFIED DISABLED INDIVIDUALS. Amphenol CIT is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. For more information regarding EEOC requirements please visit **************************************************************** ***************************************************************************************************** Due to the nature of our business, the candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol CIT participates in the United States Department of Homeland Security E-Verify program. The E-Verify program is a web-based employment eligibility verification system for newly hired employees operated by the U.S. Citizenship and Immigration Services. Any candidate that needs an accommodation or assistance with the application process should contact HR at ******************************** **Job Details** **Pay Type** **Hourly**

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Internship Term: Summer 2026 This is a general application, and is not an official opening. Your application can be considered for Rivian's 2026 internship programs. If you are selected, you will receive an invitation to interview for an open position. Rivian internships are experiences optimized for student candidates. To be eligible, you must be an undergraduate or graduate student in an accredited program during the internship term with an expected graduation date between December 2026 and 2028. If you are not pursuing a degree, please see our full time positions on our Rivian careers site. Note that if your university has specific requirements for internship programs, it is your responsibility to fulfill those requirements. Responsibilities Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes Qualifications Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Pay Disclosure Salary Range/Hourly Rate for Internships: The range of pay for internships is 25.00-51.00 per hour. Actual compensation will be determined based on location, and other factors permitted by law. Rivian provides robust wellness benefits, and a medical insurance package for interns, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes

Job Description Mechanical Engineering Technician To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

About the Organization Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. Description JOB TITLE: Jr. Mechanical Engineer DEPARTMENT: Engineering REPORTS TO: Mechanical Engineering Manager EMPLOYEE TYPE: Full Time LOCATION: 19772 Pauling, Foothill Ranch, CA 92610 GENERAL JOB DESCRIPTION: Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. The Mechanical Engineer applies skills and knowledge needed to achieve a cost-effective, functional, and ergonomic design to the development of ATE Systems and test fixtures. This Engineer works in conjunction with Electrical Engineers in order to provide a fully custom solution that meets the customer's needs. ESSENTIAL DUTIES & RESPONSIBILITIES: * Provide detailed design information to management and projects. * Perform design activities for various interface panel projects. * Interface with other engineering disciplines as required. * Utilize 3D CAD Design Software (SolidWorks) to perform mechanical design of power systems with subcomponent Placemen, cabinet structural design for ATE Systems. * Jack-of-all-trades problem solver. * Research new design processes. * Assist in fixturing design. * Direct the fabrication, assembly of product, and work cell concepts being prototyped and implemented. * Prepare clear and concise documentation for CAD Drawings and Part List for systems or sub-Assemblies of a given project. * Development and creation of design sketches ready to be modeled. * Coordinate materials procurement. QUALIFICATIONS: * B.S. in Mechanical Engineering or relevant experience (1-2 years' experience). * Intermediate in SolidWorks CAD software. * Provable skills of CAD command (part, assembly, drafting). * Good English language skills. * Multidisciplinary technical knowledge is a plus. SUPERVISORY RESPONSIBLITIES: This is a non-supervisory position. PHYSICAL DEMANDS: General office skills and dexterity are required. Must be able to lift 30 pounds. CHROMA BENEFITS: * Bonus programs based on individual and company performance * Vacation, sick, bereavement time * Medical, dental, and vision plans for employees and dependents * Life insurance, AD&D, long term disability, and employee wellness programs * 401(k) retirement accounts with immediate vesting of company contributions * Profit sharing programs WORKING CONDITIONS: Chroma Systems Solutions is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, political affiliation, marriage or veteran status, and will not be discriminated against on the basis of disability. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Pay Range $25-$33.34 Tags BOM, SolidWorks, Mechanical, schematics, DraftSight, entry-level Location Pauling

On site M-Fri 7-3: 30PM About Client: Client is one of the largest global medical technology companies in the world and is advancing the world of health by improving medical discovery, diagnostics, and the delivery of care. Client supports the heroes on the frontlines of health care by developing innovative technology, services and solutions that help advance both clinical therapy for patients and clinical process for health care providers. Client and its 75, 000 employees have a passion and commitment to help improve patient outcomes, improve the safety and efficiency of clinicians'care delivery process, enable laboratory scientists to better diagnose disease and advance researchers'capabilities to develop the next generation of diagnostics and therapeutics. Client has a presence in virtually every country and partners with organizations around the world to address some of the most challenging global health issues. By working in close collaboration with customers, Client can help enhance outcomes, lower costs, increase efficiencies, improve safety and expand access to health care. Job Description Summary: We are seeking a Product Development Tech for our Brea, CA facility. This person contributes to the completion of routine technical tasks and develops solutions to routine technical problems of specified scope. Their contacts are primarily with immediate supervisor, project leaders, and other professionals in the unit. Duties and Responsibilities: •Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes. Produces engineering document, reports, and drawings (flow charts, block diagrams and schematics) •Prepares reports and summaries, including quantitative analysis •Provides completion of technical tasks. •Provides technical support to engineers on a variety of technical tasks. •Helps scope equipment for use and complete qualifications •Works with team to on general lab functions;including calibration, implementation of safety procedures, and routine equipment maintenance •Notifies manager or team lead upon recognition of factors that may affect project •Helps develop prototype processes and test set-ups •Executes designed test protocol and conducts testing •Effectively documents and communicates test results •Handles test samples and chemicals used for conditioning and testing Requirements: Minimum Requirement: Minimum education requirement is high school diploma, experience in a lab environment (corporate or school) or technician experience in a regulated environment for a minimum of 6 years, experience following written procedures and working collaboratively with a team Preferred requirement: Bachelor of Science in a technical area and at least 1 year of experience in a laboratory/R&D setting following written procedures and working collaboratively with a team. Preferred Qualifications and Experience: •Ability to understand and perform designed test procedures •The ability to work effectively in a cross functional group and communicate effectively with the lab team and extended team members •Develops solutions to routine technical problems of limited scope •Proficiency in personal computers •Ability to train lower-level technicians

The City of Santa Ana is looking for individuals who are results-oriented, possess great attitude, demonstrate creativity and innovation, work efficiently, show a record of success and have a passion for public service. Having highly talented employees provides the best service to our community. This is a part-time internship position. The incumbent will work an average of 19 hours per week. Work schedule is to be determined. This recruitment is open until further notice and can close at any time and without notice. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. Development: Under direction of Engineering staff: Serves residents, contractors, developers, utility companies and other constituents at the Public Works Agency counter; Prepares and modifies cost estimate spreadsheets, basic exhibits and presentations; conducts data research and field investigations; Receives and distributes plan submittals; Issues construction, transportation, utility, and other permits; Reviews site plans for basic private developments; Reviews building plans to calculate development impact fees; Prepares correspondence to permit applicants with status of plan reviews and permit issuance; Performs a variety of general office tasks; and performs other related functions as assigned. Traffic: Assisting engineers in traffic engineering field investigations for existing conditions and proposed projects; conducting various engineering and warrant studies, researching project records, files, and plans; preparing/modifying plans using Microstation or manual drafting; using Microsoft Office PowerPoint, Excel, Word, Access, or other tools and databases to prepare presentation materials (maps, charts, spreadsheets, etc.); data entry; and placing and retrieving radar trailers. Additional job activities may include: conducting/evaluating speed studies, pedestrian, and vehicular counts, updating records, reviewing collision data, conducting parking surveys, issuing business/resident notices, making copies, filing, working with the public, and/or work with our signal operations team and equipment; other miscellaneous duties as assigned. In Signal Operations, additional functions include assisting engineers in operating Traffic Management Center; maintaining local area computer network; investigating traffic signal operations and complaints; maintaining traffic signal equipment, timing, and maintenance records; designing traffic signals, closed-circuit television, communication system, and other advanced traffic signal system elements; updating traffic signal plans manually or using CAD. Water Resources: Under the direction of Engineering staff, assists in the collection of field data; generates technical data, organizes documents, and coordinates data transmission to others; conducts manufacture website surveys for engineering drawings and equipment documentation; scans, records, maintains and organizes directories; updates and creates engineering drawings utilizing MicroStation; assists with the preparation and distribution of reports and documents; processes correspondence and material requisitions; performs other functions as assigned. CIP Engineering: Assignments are made to support the design and/or construction phase of projects. Design: In the design phase and under the direction of Engineering staff, the intern assists with the preparation of engineering drawings and estimates; prepares and modifies spreadsheets, project displays, and various reports; conducts data research, field investigations, and responds to the public and other agencies; performs a variety of general office tasks; and performs other related functions as assigned. Construction: In the construction phase and under the direction of Engineering staff, assist with the construction management of projects under the City's capital improvement program. Projects include construction of water, sewer, and storm drain lines, traffic signals, buildings, parks, street, sidewalk, drainage improvements, and other public facilities. Daily activities include spreadsheets, data research, correspondence, field investigations, preparing and distributing reports, responding to citizen and City agencies' inquiries, performing a variety of general office tasks, and working in the field assisting construction inspectors and survey crews. Additional responsibilities include assisting engineering staff during preconstruction and postconstruction activities. CHARACTERISTICS OF SUCCESSFUL PERFORMERS Candidates shall have a strong interest in engineering; be at ease in dealing with the public and handling complaints from residents with tact and diplomacy; be detail-oriented, organized, have good time-management skills within a vibrant work environment and seek answers should none be obvious. Candidates must be flexible, have good verbal and written communication skills, computer skills and work well with others and with minimal supervision. * Traffic: Must be currently enrolled in an UNDERGRADUATE Civil, Electrical, or Pre-Engineering curriculum with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred). Not open to Graduate/Post-Graduate students. * Development/Water Resources: Must be currently enrolled in an UNDERGRADUATE Civil/Environmental/Mechanical or Pre-Engineering Program with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred.) Not open to Graduate/Post-Graduate students * CIP Engineering: Must be currently enrolled in an UNDERGRADUATE Civil Engineering or Construction Management Program with a good standing of a current GPA of 2.50 or higher (Sophomore and Junior level is preferred). Not open to Graduate/Post-Graduate students. * Must have ample knowledge of computer software such as AutoCAD and/or Microstation and Microsoft Office applications, as well as the ability to work comfortably in a Windows environment. * Possession and retention of an appropriate valid driver's license is a condition of continued employment in this classification. * Bilingual fluency in English and Spanish is preferred but not required. Application, supplemental questionnaire, and required documents must be submitted online. Click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. The Human Resources and Public Works Department will review all applications and documents submitted. Those candidates who possess the most pertinent qualifications will be invited for an oral interview by the hiring agency. If you have any questions about the job duties assigned to the Development Division, please contact Yvonne Soto at **************. If you have any questions about the job duties assigned to the Traffic Division, please call Victor Chaidez at **************. If you have questions about the job duties assigned to the Design Division, please contact David Ramirez at **************. If you have any questions about the job duties assigned to the Water Resources Division, please contact Jaime Arias **************. If you have any questions about the job duties assigned to the Construction Division, please call Ed Torres at **************. Candidates given a conditional job offer will be required to undergo and pass a medical exam and background records check. The City of Santa Ana is an equal opportunity employer. If you consider yourself a person with a disability, you may contact us regarding providing reasonable accommodation.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills Ability to contribute and work well on a team Proficiency in Microsoft Excel, Word, and Outlook Working knowledge of AutoCAD Working knowledge in Synchro is a plus Problem-solving and decision-making skills Pursuing a degree in civil engineering #LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range $25 - $28 USD Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Essential Functions: The Project Engineering Intern assists the Project team with various activities for onsite construction projects. Responsibilities: * Assist in the development and monitoring of project budgets. Collect and code project cost documents and continually monitor and update the budget to reflect changes in work * Monitor of project schedules and review work schedules for improving work methods * Oversee the timely submittal and completion of documentation required by the owner and agencies * Prepare subcontractor and supplier agreements to be executed and prepare correspondence to document changes in work or costs * Work with foreman and superintendents to monitor all activities to insure a safe and efficient working environment for crew, subcontractors and the public * Promote good public relations with owners, subcontractors and the public * Other duties and responsibilities as assigned by the Project Manager or his/her designee Qualifications: * Must be a current student in an engineering or construction related degree program * Previous experience in construction industry a plus; * Desire to work in Water/Wastewater industry upon graduation * Working knowledge in Microsoft Office suite (such as Outlook, Word, Excel, PowerPoint, etc.) as well as the use of the internet * Advanced AutoCAD, AutoCAD MEP and Revit software use required * Must have good communications and analytical skills * Must have excellent customer service and interpersonal skills * Strong attention to detail * Ability to manage multiple projects and work independently * Ability to assess and quickly solve problems Working Conditions: 100% of the time is spent on the project. Project Engineers must be able to work flexible hours and locations throughout the area and/or other cities/states. Salary: $20-$27/hr depending on experience J.R. Filanc Construction Company, Inc. is proud to be a drug free workplace. J.R. Filanc Construction Company, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status or any other characteristic protected by applicable federal, state or local law. This job description lists the primary or "essential functions" of the job. It is not intended to be all inclusive. Other duties may be assigned by management. Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

Epirus is a high-growth technology company developing software-defined high-power microwave (HPM) systems with devastating counter-electronics effects on modern drone threats. The Epirus Leonidas HPM family of products, empowered by innovations in AI and microelectronics, is human-safe and cost-effective. Distinguishing itself from lasers, Leonidas excels against drone swarms while also bending the cost curve back in DoD's favor - taking drone defeat costs from millions of dollars per drone to pennies on the dollar. Job Summary: This is an exciting role in a growing company. We are looking for interns to join us on a 10-week internship program. This will be a hands on and in-person position. Basic Qualifications: Pursuing a Bachelors degree in Mechanical Engineering, or any related field Rising senior or beyond at time of internship and have a graduation date between 12/2026 - 12/2027. All applicants should be returning to school at the end of their internship to continue their academic studies. Prior internship, collegiate project team, or laboratory experience CAD experience (any platform) U.S. Person status is required as this position needs to access export-controlled data ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. People are the most important part of Epirus - and always come first. We don't believe in the word impossible and are always asking “why not” as work to usher in a new paradigm of power efficiency. Our fast-growing team is agile, creative, and innovative. We support a culture of constant learning and sense of belonging among our team members and know that mentorship matters. We embrace diversity, equity and inclusion in the workplace and beyond. To deliver on our mission, we are always looking for problem solvers, changemakers and innovators to join our fast-growing team. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $36-$38 USD

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary In this position, you will be developing electrical vehicle products directly related to high voltage and low voltage electronics from the concept to production launch. During the development and launch phases, you will be working with multiple cross functional teams, suppliers, and production integrators. The position requires to travel to Rivian plant(s) to support the production launch and ramp-ups, and will report directly to the Director of Mechanical Design. Responsibilities Working in fast-paced environment for various on-vehicle power electronics developments Developing highly technical power electronics components and overall packaging from concepts to production launch Leading to manage PCBA CM as PCBA DRE Leading the cross functional team discussions of the power electronics development in terms of mechanical packaging including the production manufacturing Working with electrical engineering team to improve the PCBA mechanical design and packaging Working with component suppliers for component development including all DFM executions Leading of component and assembly design release working with PLM team through Enovia Working on mechanical design issues by providing root case, corrective resolutions Supporting the product production launch Hosting weekly meetings with component suppliers and other cross functional teams Identifying cost saving item opportunity and developing engineering plans Qualifications Minimum Bachelor's degree in mechanical engineering or related engineering field. Minimum 6 years of professional work experience in high voltage automotive power electronics product development Technical knowledge and manufacturing process experience in power device cooling and thermal management CATIA CAD tool experience Automotive supplier managing experience Knowledge or experience with sheet metal stamping, casting, wiring harness, and plastic injection molding processes Ability to work independently and manage several challenging projects simultaneously Problem solving capabilities and willing to drive to resolve product technical challenges Always maintains a positive and proactive attitude Pay Disclosure Salary Range for Southern California Based Applicants: $137,800 - $172,520 (actual compensation will be determined based on experience, location, and other factors permitted by law). Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Minimum Bachelor's degree in mechanical engineering or related engineering field. Minimum 6 years of professional work experience in high voltage automotive power electronics product development Technical knowledge and manufacturing process experience in power device cooling and thermal management CATIA CAD tool experience Automotive supplier managing experience Knowledge or experience with sheet metal stamping, casting, wiring harness, and plastic injection molding processes Ability to work independently and manage several challenging projects simultaneously Problem solving capabilities and willing to drive to resolve product technical challenges Always maintains a positive and proactive attitude Working in fast-paced environment for various on-vehicle power electronics developments Developing highly technical power electronics components and overall packaging from concepts to production launch Leading to manage PCBA CM as PCBA DRE Leading the cross functional team discussions of the power electronics development in terms of mechanical packaging including the production manufacturing Working with electrical engineering team to improve the PCBA mechanical design and packaging Working with component suppliers for component development including all DFM executions Leading of component and assembly design release working with PLM team through Enovia Working on mechanical design issues by providing root case, corrective resolutions Supporting the product production launch Hosting weekly meetings with component suppliers and other cross functional teams Identifying cost saving item opportunity and developing engineering plans

Job DescriptionMechanical Engineering Technician To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

Irvine, CA ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills + Ability to contribute and work well on a team + Proficiency in Microsoft Excel, Word, and Outlook + Working knowledge of AutoCAD + Working knowledge in Synchro is a plus + Problem-solving and decision-making skills + Pursuing a degree in civil engineering \#LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range $25-$28USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Job DescriptionSalary: $25/Hourly Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.