Mechanical engineering internship jobs in Redlands, CA - 194 jobs

**About the Role & Program:** Within the Disneyland Resort, the Global Engineering & Technology (GE&T) Division program is specially crafted to develop you professionally, increase your practical knowledge in your area of technical expertise, while also completing valuable work for the Resort. You will have a wide range of opportunities to assist and provide key data to GE&T Engineers on various types of projects including, but not limited to, Attractions, Maintenance, Show and Entertainment. It may even serve as a springboard in launching a successful career. **The approximate dates of this internship are** **June 2026 - December 2026** **.** **Interns must be fully available for the duration of the internship.** **This internship is located in Anaheim, CA.** **What You Will Do:** + Drafting, onsite as-built documentation, design coordination with outside design consultants, field data collection and testing, and recommending corrective actions (including justification). + Developing Attraction requirements and designing opportunities and condition assessments. + Must demonstrate a solid understanding of Solidworks and/or AutoCAD. + May possibly be working with Sustaining Engineering tasks including downtime response and small attraction improvement efforts. + Close-out documentation for a variety of tasks ranging in scope from minor design changes to implementing new Attractions. + Comply with all applicable company, state, and Federal legal codes, policies, and regulations. + Provide timely, clear, concise communication to management, customers, partners, and team members about work status and impact to Resort availability. **Required Qualifications & Skills:** + Demonstrated/proven strong leadership, technical and interpersonal skills. + Ability to handle multiple tasks and priorities. + Working knowledge of AutoCAD, SolidWorks and Matlab. + Valid US driver's license. + Availability to work various shifts commensurate with project requirements. **Preferred Qualifications & Skills:** It would be great if you have/are familiar with: + Prior related work experience is desired, including co-op/intern programs with a focus on engineering materials, hydraulics, pneumatics, electrical systems, control, or design. + Previous Theme Park work experience. **Education:** + Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor or Master's degree in mechanical engineering. + GPA of 3.0 or higher (no rounding) **Eligibility Requirements & Program Information:** + Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application posting OR currently participating in a Disney College Program or Disney Internship + Be at least 18 years of age + Possess unrestricted work authorization + Have not completed one year of continual employment on a Disney internship or Disney College Program **Additional Information:** - Be compliant with The Disney Look appearance guidelines - Able to have a consistent, reliable work schedule throughout the internship - Fully available Monday thru Friday, PST for the duration of the internship,40 hours each week - Able to provide own housing for the duration internship program in the Anaheim, CA area - Able to provide/have reliable transportation to/from work The pay rate for this role as an undergraduate in CA is $30.00 /hr. The pay rate for this role as a graduate student in CA is $35.00/hr. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: *************************************** **Job ID:** 10141105 **Location:** Anaheim,California **Job Posting Company:** Disneyland Resort The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

Zymo Research is looking for a dynamic individual to join our Engineering Team! The Mechanical Engineer Intern will support the design and development of plastic sample collection devices within a product development environment. This role is intended for students or recent graduates pursuing a degree in Mechanical Engineering or a related field and provides hands-on experience in CAD design, prototyping, and cross-functional collaboration. Join us in making a meaningful impact! Key Responsibilities Create and modify 3D CAD models and drawings for plastic components using SolidWorks or similar tools Support plastic part design with consideration for manufacturability and assembly Assist with prototype development, evaluation, and design iteration Collaborate with engineering and manufacturing teams to support development activities Maintain accurate design documentation in accordance with internal processes Key Skills and Qualifications Pursuing or recently completed a Bachelor's degree in Mechanical Engineering or related field Proficiency in CAD software Basic understanding of plastic part design principles Strong attention to detail and ability to work in a team environment Preferred Skills Exposure to injection-molded plastic design or rapid prototyping Experience in a product development or regulated environment About Us: Since its inception in 1994, Zymo Research has been proudly serving the scientific community by providing innovative, reliable, and high-quality research tools and products. Whether it's DNA, RNA, epigenetics, microbiomics, protein, or yeast-based research, our philosophy remains the same: To provide the highest quality products in the industry while ensuring they are both simple to use and reliable in their performance. Recognized as a Top Workplace by the Orange County Register in 2021, 2022, and named a Top Workplace USA in 2023, Zymo Research continues to be a vibrant community where employees thrive, feel connected, and are inspired by their work. If you are passionate about contributing to scientific advancement and want to be part of an exceptional team in a dynamic, growing company, we'd love to hear from you! Compensation, Benefits, and Perks: The estimated base compensation range for this position is $20 - $25 an hour at the time of posting. Actual compensation details will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. Zymo Research also offers competitive benefits and perks including: EAP Sessions Paid Sick Leave Complimentary fruit, snacks, and beverages Complimentary catered lunches on Thursdays Complimentary EV Charging Equal Employment Opportunity Employer: Zymo Research welcomes candidates of all backgrounds. These include sex, age, color, race, religion, marital status, national origin, ancestry, sexual orientation, gender, gender identity, gender expression, physical & mental disability, medical condition, genetic information, military and veteran status, or any other protected status as defined by federal, state, or local law. Location: Onsite - Zymo Research HQ - 17062 Murphy Ave., Irvine, CA 92614 Disclaimer: At Zymo, we take the integrity of our hiring process seriously. Please be aware of fraudulent recruitment activities that may use our name to deceive job seekers. We will never ask for payment, sensitive personal information, or financial details during the recruitment process. All legitimate communications will come from an official Zymo or TriNet Hiring email address. If you are contacted by anyone claiming to represent us using a free email service (e.g., Gmail, Yahoo, Hotmail) or asking for payment, please treat this as fraudulent and report it immediately to *******************

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Internship Term: Summer 2026 This is a general application, and is not an official opening. Your application can be considered for Rivian's 2026 internship programs. If you are selected, you will receive an invitation to interview for an open position. Rivian internships are experiences optimized for student candidates. To be eligible, you must be an undergraduate or graduate student in an accredited program during the internship term with an expected graduation date between December 2026 and 2028. Rivian's Internship Program requires active student enrollment. Information regarding your expected degree completion date is collected solely to verify eligibility and determine your availability for future full-time opportunities. Rivian is an equal opportunity employer and does not use graduation dates to determine the age of applicants or as a basis for discriminatory hiring decisions. If you are not pursuing a degree, please see our full time positions on our Rivian careers site. Note that if your university has specific requirements for internship programs, it is your responsibility to fulfill those requirements. Responsibilities Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes Qualifications Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Pay Disclosure The salary range for this role is $33.00-51.00/HR for Palo Alto based applicants, $26.00-45.00/HR for Irvine based applicants, and $25.00-$40.00/HR for Normal or Plymouth based applicants. This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting. An employee's position within the salary range will be based on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, experience, skills, geographic location, shift, and organizational needs. We offer a comprehensive package of benefits including but not limited to paid vacation, paid sick leave, and medical insurance benefits. More information about benefits is available at rivianbenefits.com. You can apply for this role through careers.rivian.com (or through internal-careers-rivian.icims.com if you are a current employee). There is no fixed deadline for this application; applications are accepted on an ongoing basis until the role is filled or the opening is no longer needed. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes

On site M-Fri 1: 30 - 10: 00PM Interviews will be in-person About Client: Client is one of the largest global medical technology companies in the world and is advancing the world of health by improving medical discovery, diagnostics, and the delivery of care. Client supports the heroes on the frontlines of health care by developing innovative technology, services and solutions that help advance both clinical therapy for patients and clinical process for health care providers. Client and its 75, 000 employees have a passion and commitment to help improve patient outcomes, improve the safety and efficiency of clinicians'care delivery process, enable laboratory scientists to better diagnose disease and advance researchers'capabilities to develop the next generation of diagnostics and therapeutics. Client has a presence in virtually every country and partners with organizations around the world to address some of the most challenging global health issues. By working in close collaboration with customers, Client can help enhance outcomes, lower costs, increase efficiencies, improve safety and expand access to health care. Job Description Summary: We are seeking a Product Development Tech for our Brea, CA facility. This person contributes to the completion of routine technical tasks and develops solutions to routine technical problems of specified scope. Their contacts are primarily with immediate supervisor, project leaders, and other professionals in the unit. Duties and Responsibilities: •Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes. Produces engineering document, reports, and drawings (flow charts, block diagrams and schematics) •Prepares reports and summaries, including quantitative analysis •Provides completion of technical tasks. •Provides technical support to engineers on a variety of technical tasks. •Helps scope equipment for use and complete qualifications •Works with team to on general lab functions;including calibration, implementation of safety procedures, and routine equipment maintenance •Notifies manager or team lead upon recognition of factors that may affect project •Helps develop prototype processes and test set-ups •Executes designed test protocol and conducts testing •Effectively documents and communicates test results •Handles test samples and chemicals used for conditioning and testing Requirements: Minimum Requirement: Minimum education requirement is high school diploma, experience in a lab environment (corporate or school) or technician experience in a regulated environment for a minimum of 6 years, experience following written procedures and working collaboratively with a team Preferred requirement: Bachelor of Science in a technical area and at least 1 year of experience in a laboratory/R&D setting following written procedures and working collaboratively with a team. Preferred Qualifications and Experience: •Ability to understand and perform designed test procedures •The ability to work effectively in a cross functional group and communicate effectively with the lab team and extended team members •Develops solutions to routine technical problems of limited scope •Proficiency in personal computers •Ability to train lower-level technicians

To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

About the Organization Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. Description JOB TITLE: Jr. Mechanical Engineer DEPARTMENT: Engineering REPORTS TO: Mechanical Engineering Manager EMPLOYEE TYPE: Full Time LOCATION: 19772 Pauling, Foothill Ranch, CA 92610 GENERAL JOB DESCRIPTION: Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. The Mechanical Engineer applies skills and knowledge needed to achieve a cost-effective, functional, and ergonomic design to the development of ATE Systems and test fixtures. This Engineer works in conjunction with Electrical Engineers in order to provide a fully custom solution that meets the customer's needs. ESSENTIAL DUTIES & RESPONSIBILITIES: * Provide detailed design information to management and projects. * Perform design activities for various interface panel projects. * Interface with other engineering disciplines as required. * Utilize 3D CAD Design Software (SolidWorks) to perform mechanical design of power systems with subcomponent Placemen, cabinet structural design for ATE Systems. * Jack-of-all-trades problem solver. * Research new design processes. * Assist in fixturing design. * Direct the fabrication, assembly of product, and work cell concepts being prototyped and implemented. * Prepare clear and concise documentation for CAD Drawings and Part List for systems or sub-Assemblies of a given project. * Development and creation of design sketches ready to be modeled. * Coordinate materials procurement. QUALIFICATIONS: * B.S. in Mechanical Engineering or relevant experience (1-2 years' experience). * Intermediate in SolidWorks CAD software. * Provable skills of CAD command (part, assembly, drafting). * Good English language skills. * Multidisciplinary technical knowledge is a plus. SUPERVISORY RESPONSIBLITIES: This is a non-supervisory position. PHYSICAL DEMANDS: General office skills and dexterity are required. Must be able to lift 30 pounds. CHROMA BENEFITS: * Bonus programs based on individual and company performance * Vacation, sick, bereavement time * Medical, dental, and vision plans for employees and dependents * Life insurance, AD&D, long term disability, and employee wellness programs * 401(k) retirement accounts with immediate vesting of company contributions * Profit sharing programs WORKING CONDITIONS: Chroma Systems Solutions is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, political affiliation, marriage or veteran status, and will not be discriminated against on the basis of disability. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Pay Range $25-$33.34 Tags BOM, SolidWorks, Mechanical, schematics, DraftSight, entry-level Location Pauling

Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

The City of Santa Ana is looking for individuals who are results-oriented, possess great attitude, demonstrate creativity and innovation, work efficiently, show a record of success and have a passion for public service. Having highly talented employees provides the best service to our community. This is a part-time internship position. The incumbent will work an average of 19 hours per week. Work schedule is to be determined. This recruitment is open until further notice and can close at any time and without notice. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. Development: Under direction of Engineering staff: Serves residents, contractors, developers, utility companies and other constituents at the Public Works Agency counter; Prepares and modifies cost estimate spreadsheets, basic exhibits and presentations; conducts data research and field investigations; Receives and distributes plan submittals; Issues construction, transportation, utility, and other permits; Reviews site plans for basic private developments; Reviews building plans to calculate development impact fees; Prepares correspondence to permit applicants with status of plan reviews and permit issuance; Performs a variety of general office tasks; and performs other related functions as assigned. Traffic: Assisting engineers in traffic engineering field investigations for existing conditions and proposed projects; conducting various engineering and warrant studies, researching project records, files, and plans; preparing/modifying plans using Microstation or manual drafting; using Microsoft Office PowerPoint, Excel, Word, Access, or other tools and databases to prepare presentation materials (maps, charts, spreadsheets, etc.); data entry; and placing and retrieving radar trailers. Additional job activities may include: conducting/evaluating speed studies, pedestrian, and vehicular counts, updating records, reviewing collision data, conducting parking surveys, issuing business/resident notices, making copies, filing, working with the public, and/or work with our signal operations team and equipment; other miscellaneous duties as assigned. In Signal Operations, additional functions include assisting engineers in operating Traffic Management Center; maintaining local area computer network; investigating traffic signal operations and complaints; maintaining traffic signal equipment, timing, and maintenance records; designing traffic signals, closed-circuit television, communication system, and other advanced traffic signal system elements; updating traffic signal plans manually or using CAD. Water Resources: Under the direction of Engineering staff, assists in the collection of field data; generates technical data, organizes documents, and coordinates data transmission to others; conducts manufacture website surveys for engineering drawings and equipment documentation; scans, records, maintains and organizes directories; updates and creates engineering drawings utilizing MicroStation; assists with the preparation and distribution of reports and documents; processes correspondence and material requisitions; performs other functions as assigned. CIP Engineering: Assignments are made to support the design and/or construction phase of projects. Design: In the design phase and under the direction of Engineering staff, the intern assists with the preparation of engineering drawings and estimates; prepares and modifies spreadsheets, project displays, and various reports; conducts data research, field investigations, and responds to the public and other agencies; performs a variety of general office tasks; and performs other related functions as assigned. Construction: In the construction phase and under the direction of Engineering staff, assist with the construction management of projects under the City's capital improvement program. Projects include construction of water, sewer, and storm drain lines, traffic signals, buildings, parks, street, sidewalk, drainage improvements, and other public facilities. Daily activities include spreadsheets, data research, correspondence, field investigations, preparing and distributing reports, responding to citizen and City agencies' inquiries, performing a variety of general office tasks, and working in the field assisting construction inspectors and survey crews. Additional responsibilities include assisting engineering staff during preconstruction and postconstruction activities. CHARACTERISTICS OF SUCCESSFUL PERFORMERS Candidates shall have a strong interest in engineering; be at ease in dealing with the public and handling complaints from residents with tact and diplomacy; be detail-oriented, organized, have good time-management skills within a vibrant work environment and seek answers should none be obvious. Candidates must be flexible, have good verbal and written communication skills, computer skills and work well with others and with minimal supervision. * Traffic: Must be currently enrolled in an UNDERGRADUATE Civil, Electrical, or Pre-Engineering curriculum with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred). Not open to Graduate/Post-Graduate students. * Development/Water Resources: Must be currently enrolled in an UNDERGRADUATE Civil/Environmental/Mechanical or Pre-Engineering Program with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred.) Not open to Graduate/Post-Graduate students * CIP Engineering: Must be currently enrolled in an UNDERGRADUATE Civil Engineering or Construction Management Program with a good standing of a current GPA of 2.50 or higher (Sophomore and Junior level is preferred). Not open to Graduate/Post-Graduate students. * Must have ample knowledge of computer software such as AutoCAD and/or Microstation and Microsoft Office applications, as well as the ability to work comfortably in a Windows environment. * Possession and retention of an appropriate valid driver's license is a condition of continued employment in this classification. * Bilingual fluency in English and Spanish is preferred but not required. Application, supplemental questionnaire, and required documents must be submitted online. Click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. The Human Resources and Public Works Department will review all applications and documents submitted. Those candidates who possess the most pertinent qualifications will be invited for an oral interview by the hiring agency. If you have any questions about the job duties assigned to the Development Division, please contact Yvonne Soto at **************. If you have any questions about the job duties assigned to the Traffic Division, please call Victor Chaidez at **************. If you have questions about the job duties assigned to the Design Division, please contact David Ramirez at **************. If you have any questions about the job duties assigned to the Water Resources Division, please contact Jaime Arias **************. If you have any questions about the job duties assigned to the Construction Division, please call Ed Torres at **************. Candidates given a conditional job offer will be required to undergo and pass a medical exam and background records check. The City of Santa Ana is an equal opportunity employer. If you consider yourself a person with a disability, you may contact us regarding providing reasonable accommodation.

Irvine, CA ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills + Ability to contribute and work well on a team + Proficiency in Microsoft Excel, Word, and Outlook + Working knowledge of AutoCAD + Working knowledge in Synchro is a plus + Problem-solving and decision-making skills + Pursuing a degree in civil engineering \#LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range $25-$28USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Job Description What you can expect: Casco's internship program provides students an opportunity to learn and grow with hands-on experiences preparing them for a thriving career in the construction management industry. We pride ourselves in providing a welcoming and supportive learning environment. Students will be exposed to all levels of leadership and will be mentored, led and developed directly by seasoned project management and field professionals. Interns within our program will rotate through our project management and field departments providing experience to full cycle project management from preconstruction through project close out. We are excited to be able to develop future industry professionals and can't wait to see our internship participants' careers flourish. You Will: Support the project management team with subcontractor and supplier coordination, material tracking, and file management. Assist the project management team with progress updates and reporting for client review. Aid in document control processes such as drafting submittals, RFI's and change orders. Assist the preparation of bid packages, helping to solicit and evaluate subcontractor bids. Conduct various preconstruction procedures by reviewing proposals, specifications, and drawings, executing material takeoffs, preparing cost estimates, and attending internal team meetings and client job walks. Collaborate with onsite superintendents and field-based teams to assist with project layout, construction drawing, trade coordination, verification of site conditions, safety, and quality control inspections. Attend all project meetings that will grow your knowledge of the project process (job walks, RFP kickoffs, project kickoffs, MEP coordination meetings, weekly OAC meetings, punchlist walks, etc.) Actively participate in social and networking events, weekly training and educational classes. Skills/Qualifications Current students pursuing an undergraduate or graduate degree from an accredited university within the construction or engineering concentrations. Previous industry internship, volunteer work, or work experience is a plus. Passionate about the construction and general contracting industry. Ability to work up to 40 hours per week for the duration of the 8 to 12-week program. Ability to successfully manage multiple, competing priorities in a deadline-driven environment. Demonstrated ability to learn project-specific software systems, including MS Office (ex. Project, Excel, Word, PowerPoint, etc.), Procore, Adobe, and Bluebeam. Exceptional customer and client focus with the ability to succeed in a team environment. Strong written and verbal communication skills. Interns will be considered part-time temporary employees and as such will not be eligible for company healthcare benefits.

PULLMAN, a Structural Group Company, integrates technology-driven, engineered solutions into its industry-leading contracting services. PULLMAN's capabilities include specialty design-build services for new and existing structures, as well as a wide range of specialty repair and maintenance services. With offices located throughout Canada, and as a signatory to local, national, and international labor union agreements, PULLMAN has the track record and the experience to meet our customers' specialty contracting needs. About the Role: If you are seeking a challenging and rewarding construction internship opportunity with a dynamic, diversified and innovative company, a PULLMAN Project Engineer Internship may be for you! Our Project Engineer Career Development (PECD) program is a cornerstone of our growth and development philosophy. With an emphasis on in-field learning and development, our Project Engineer Interns will assist in: Scheduling and production rate tracking Estimating Budget preparation and project cost control Safety management Quality control Business development and client relations Field resource management Our ideal Project Engineer Intern candidate loves to solve problems, thrives in a collaborative team-based environment, has a strong time management system, hits deadlines, enjoys communicating with different types of people, organizes themselves well and is safety focused About the Team: Our Summer 2026 Internship will be an in-office position supported by our PULLMAN Los Angeles team located in Orange County, CA. In this role, you can expect to be on site at project across the greater Los Angeles area 50% of the time. Our PULLMAN Los Angeles team will tackle projects across multiple industries; however, this branch's primary industries are commercial and public. Throughout your internship experience, you can expect to learn about multiple projects within these industries. For more information on PULLMAN Los Angeles, please refer to PULLMAN Los Angeles' website page: Pullman Services Los Angeles | PULLMAN Minimum Qualifications: Bachelor's Degree- preference for Construction Management, Civil Engineering or related field of study. Cumulative grade point average of 2.8 or higher. Excellent verbal and written communication skills. Exceptional documentation and organizational skills. Aptitude for solving problems. Reliable transportation from the office to jobsites. Benefits: PECD Program providing exposure into various areas of construction project management. Hands-on mentorship. Internal career flexibility. Cell-phone reimbursement 401(k) eligible upon hire. Pay rate of $20 to $28 an hour based on relevant qualifications and experience $0.00 - $0.00 PULLMAN is proud of a company culture that promotes 24/7 safety and quality. We offer competitive compensation and benefits including medical and dental insurance, 401(k), paid holidays & vacation, tuition reimbursement, career development and growth opportunities, and a caring work environment. EOE/M/F/D/V

About Us AGI General Contracting (AGI) is a commercial general contracting firm that was founded in 1978 and has successfully completed projects in a wide range of industries, from grocery stores and retail developments to medical facilities, restaurants, and theme parks. AGI is a relationship-based contractor that is serious about taking care of its clients. We are considered a top contractor by our clients as demonstrated by the consistent pipeline of work that we do for them. AGIs growing list of clients includes over a dozen national/regional retailers, developers, and healthcare providers. Our vision is to be the leading commercial general contracting firm in the West specializing in healthcare, grocery, and retail. AGIs Values are Integrity, Family, Safety, Customer Satisfaction, Customer-Centric, Giving Back. We have always been a family-owned and operated business, and our work environment reflects our values. We reward talent, loyalty, pride of workmanship, whatever it takes attitude, and reliability. We provide opportunities to grow and advance based on performance. If you share our high standards and solid values, we would love to talk with you about an opportunity for a rewarding future with AGI. AGI General Contracting located in Santa Ana, California is seeking candidates for a three to six-month Project Engineer Internship. The Project Engineer Intern will work on projects as part of the construction team. They will be responsible for learning how to support the project team and assist in maintaining project records, Requests for Information (RFI's), and submittals. The Intern will be involved in virtually all aspects of project management procedures and functions, including but not limited to: Learn how to review and process submittals and assist in obtaining and distributing submittals to key stakeholders. Learn and assist the project team in preparing RFI's, distributing responses, and tracking outstanding RFI's. Learn about the change order process and help the project team in identifying, compiling, and tracking change orders and the associated documentation. Learn and assist the project team in creating, maintaining, and organizing project files, plans and correspondence. Understand Subcontractor compliance and associated documents and help obtain and organize all required documentation. Attend start-up and closeout meetings with the Project Engineer and other members of the project team and handle start-up and close-out tasks as needed. Qualifications Enrollment in a Four-year college degree in construction management, engineering, or business management program is required. Knowledge of estimating, scheduling, and engineering principals and techniques is preferred. Knowledge and understanding of construction drawings and specifications, materials, means and methods. Strong computer skills and a familiarity with the Microsoft office suite of programs (Outlook, Excel, Word, Project). Strong English oral & written communication skills and good organizational skills are required. If you think you would be a great fit and share our high standards and solid values, please contact us about the possibility of joining our team.

About the Role & Program: Within the Disneyland Resort, the Global Engineering & Technology (GE&T) Division program is specially crafted to develop you professionally, increase your practical knowledge in your area of technical expertise, while also completing valuable work for the Resort. You will have a wide range of opportunities to assist and provide key data to GE&T Engineers on various types of projects including, but not limited to, Attractions, Maintenance, Show and Entertainment. It may even serve as a springboard in launching a successful career. The approximate dates of this internship are June 2026 - December 2026. Interns must be fully available for the duration of the internship. This internship is located in Anaheim, CA. What You Will Do: Drafting, onsite as-built documentation, design coordination with outside design consultants, field data collection and testing, and recommending corrective actions (including justification). Developing Attraction requirements and designing opportunities and condition assessments. Must demonstrate a solid understanding of Solidworks and/or AutoCAD. May possibly be working with Sustaining Engineering tasks including downtime response and small attraction improvement efforts. Close-out documentation for a variety of tasks ranging in scope from minor design changes to implementing new Attractions. Comply with all applicable company, state, and Federal legal codes, policies, and regulations. Provide timely, clear, concise communication to management, customers, partners, and team members about work status and impact to Resort availability. Required Qualifications & Skills: Demonstrated/proven strong leadership, technical and interpersonal skills. Ability to handle multiple tasks and priorities. Working knowledge of AutoCAD, SolidWorks and Matlab. Valid US driver's license. Availability to work various shifts commensurate with project requirements. Preferred Qualifications & Skills: It would be great if you have/are familiar with: Prior related work experience is desired, including co-op/intern programs with a focus on engineering materials, hydraulics, pneumatics, electrical systems, control, or design. Previous Theme Park work experience. Education: Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor or Master's degree in mechanical engineering. GPA of 3.0 or higher (no rounding) Eligibility Requirements & Program Information: Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application posting OR currently participating in a Disney College Program or Disney Internship Be at least 18 years of age Possess unrestricted work authorization Have not completed one year of continual employment on a Disney internship or Disney College Program Additional Information: • Be compliant with The Disney Look appearance guidelines • Able to have a consistent, reliable work schedule throughout the internship • Fully available Monday thru Friday, PST for the duration of the internship,40 hours each week • Able to provide own housing for the duration internship program in the Anaheim, CA area • Able to provide/have reliable transportation to/from work The pay rate for this role as an undergraduate in CA is $30.00 /hr. The pay rate for this role as a graduate student in CA is $35.00/hr. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: *************************************** Job Posting Segment: Worldwide Safety, Health, Engineer & Sourcing Job Posting Primary Business: Global Engineering & Technology (WSHES) Primary Job Posting Category: Engineering Intern Employment Type: Full time Primary City, State, Region, Postal Code: Anaheim, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-26

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary As the Staff Mechanical Design Engineer, Motor, you will have a critical technical role guiding and shaping the design, release, and integration of an electric motor. Specifically, technical responsibility for motor electromagnetic analysis, NVH analysis, thermal analysis, and performance analysis. You will work with purchasing to source components and work collaboratively with suppliers to ensure manufacturability at scale. You will develop DFMEAs and DVPRs to ensure robust analytical and physical validation. Responsibilities Design mechanical components of stators, rotors, and their integration Iterate motor mechanical designs to optimize electromagnetic performance while ensuring manufacturability and cost-effectiveness Lead engineering on winding technologies, magnet materials, lamination methods, insulation, and electrical interconnections Design, model, and simulate electromagnetic components and systems using industry-standard software Develop detailed CAD drawings and manufacturing instructions Perform linear static stress and structural analyses on components under operational and dynamic loads. Execute and document Design Verification Plans & Reports (DVP&R) Develop and maintain Design Failure Mode and Effects Analyses (DFMEAs) Coordinate validation and quality assurance activities with Tier 1 and Tier 2 suppliers Collaborate across disciplines to advance designs from initial concept through prototyping to mass production. Support hands-on prototype assembly, testing, and component fabrication Qualifications BS in Mechanical Engineering, Electrical Engineering, or a related field; MS preferred 5+ years of experience leading validation efforts in automotive or high-power product field Proficient in CAD tools (CATIA/3DExperience preferred) and PLM systems for component design, including BOM structuring and engineering change control. Proficient in industry-standard electromagnetic simulation Strong mechanical engineering foundation, with expertise in materials, heat treatments, statics, dynamics, and mechanics of materials Experienced in high-volume manufacturing techniques for electric motor components (e.g., stamping, winding, welding) Deep understanding of electric motor design parameters and their influence on torque, power, efficiency, thermal performance, and NVH Skilled in FEA using tools like Ansys, Abaqus, and HyperWorks; experienced with MATLAB and/or Python for performance modeling and data analysis Proficient in GD&T and tolerance stack-up analysis to ensure reliability Hands-on experience with integration, assembly, testing, and troubleshooting of electric motors Pay Disclosure Salary Range for California Based Candidates: $137,800.00 - $172,200.00 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. BS in Mechanical Engineering, Electrical Engineering, or a related field; MS preferred 5+ years of experience leading validation efforts in automotive or high-power product field Proficient in CAD tools (CATIA/3DExperience preferred) and PLM systems for component design, including BOM structuring and engineering change control. Proficient in industry-standard electromagnetic simulation Strong mechanical engineering foundation, with expertise in materials, heat treatments, statics, dynamics, and mechanics of materials Experienced in high-volume manufacturing techniques for electric motor components (e.g., stamping, winding, welding) Deep understanding of electric motor design parameters and their influence on torque, power, efficiency, thermal performance, and NVH Skilled in FEA using tools like Ansys, Abaqus, and HyperWorks; experienced with MATLAB and/or Python for performance modeling and data analysis Proficient in GD&T and tolerance stack-up analysis to ensure reliability Hands-on experience with integration, assembly, testing, and troubleshooting of electric motors Design mechanical components of stators, rotors, and their integration Iterate motor mechanical designs to optimize electromagnetic performance while ensuring manufacturability and cost-effectiveness Lead engineering on winding technologies, magnet materials, lamination methods, insulation, and electrical interconnections Design, model, and simulate electromagnetic components and systems using industry-standard software Develop detailed CAD drawings and manufacturing instructions Perform linear static stress and structural analyses on components under operational and dynamic loads. Execute and document Design Verification Plans & Reports (DVP&R) Develop and maintain Design Failure Mode and Effects Analyses (DFMEAs) Coordinate validation and quality assurance activities with Tier 1 and Tier 2 suppliers Collaborate across disciplines to advance designs from initial concept through prototyping to mass production. Support hands-on prototype assembly, testing, and component fabrication

Job DescriptionMechanical Engineering Technician To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

Job DescriptionSalary: $25/Hourly Directly from the classroom to the construction site, you will see firsthand a culture founded on trust and quality to our clients, employee owners and our communities. Your efforts will go directly to building a better tomorrow for your communities! Throughout your internship you will experience firsthand our family culture! You will begin building a foundation for your future career by developing skills and expanding your knowledge to take with you into your next chapter of life Our Interns report to the Project Manager or Assistant PM, Pre-construction, or Estimating Managers and perform duties to assist in learning the process of managing the construction of the project. Interns work in conjunction with other Field Staff to ensure mutual project and personal development goals are being met. Duties may include the following, depending on education and skill level, as well as the status/timing of the project. Please note that this position takes place in multiple regions, San Diego, Riverside, Orange County and Imperial. Key Responsibilities Assist team with General Contract and Subcontract administration Learn about Quality Control programs and how to coordinate actions to address problems Control of documents including but not limited to RFI postings and contract documents Distribute information required for construction to appropriate parties Work with the projects PE(s), SPE(s), and APM(s) to compile contract close-out documents (O&M manuals, As-Builts, etc.) Assist in preparation of a contract items list Research and suggest options on construction means, methods, and equipment Perform other duties as required or assigned Qualifications Current student (preferably sophomore or higher) working towards a Bachelor's degree, in Construction Management, Mechanical Engineering, Civil Engineering, Structural Engineering or a related field. A strong desire to learn and develop new skills Strong sense of Teamwork Success managing multiple, competing priorities in a deadline driven environment Excellent oral and written communication and interpersonal skills Resourceful with strong problem solving and troubleshooting skills Ability to work independently as well as collaborate on a team Highly organized and detail oriented; able to prioritize and multi-task While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand, and finger skills in the use of a keyboard, telephone, or writing The employee is frequently required to stand; walk; and reach with arms and/or hands Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson's rail traffic experts provide clients with a single resource for services such as traffic signal preemption design, grade crossing safety design, traffic operations studies, and other related services. As a civil engineering intern on the Rail Traffic and Public Projects team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of a team, working for our clients on projects with our most experienced engineers. You may be involved in a variety of tasks including basic project design through CAD drafting, performing research, and writing technical reports. You may also travel to job sites for observation as needed. Other tasks you may be involved in include assisting with traffic and preemption analysis/design, performing site visits, assisting with plan or study preparation, and working closely with others on complex projects. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills Ability to contribute and work well on a team Proficiency in Microsoft Excel, Word, and Outlook Working knowledge of AutoCAD Working knowledge in Synchro is a plus Problem-solving and decision-making skills Pursuing a degree in civil engineering #LI-DNI Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. California Pay Range $25 - $28 USD Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

What you can expect:

About the Role & Program: "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire magic by enabling our teams to push the limits of entertainment and create the never-before-seen! Within the Disneyland Resort, the Architecture & Facility Engineering Services (A&FES) Division program is specially designed to develop you professionally, increase your practical knowledge in your area of technical expertise, while also completing valuable work for the Resort. You will have a wide range of opportunities to assist and provide key data to A&FES Architects and Engineers on various types of projects including Attractions, Maintenance, Foods, Merchandise and Entertainment. The approximate dates of this internship are June 2026 - December 2026. Interns must be fully available for the duration of the internship. This Internship is in Anaheim, CA. What You Will Do: Assist project Engineers - Civil, Structural, Mechanical, Plumbing, and Electrical, in all phases of project work, from drafting, on-site as-built documentation, design coordination with outside design consultants, field data collection, light design / production work, construction administration, commissioning, and closeout documentation for a variety of projects ranging in scope from minor rehabs to building new facilities. Required Qualifications & Skills: Experience working with AutoCAD, REVIT and/or BIM (Building Information Modeling). Demonstrated/proven strong leadership, technical and interpersonal skills. Self-starter with demonstrated initiative - able to handle multiple tasks and priorities. Availability to work various shifts commensurate with project requirements. Preferred Qualifications & Skills: Prior related work experience is desired, including co-op/intern programs with a focus on architecture, engineering, or construction. Coursework or prior work experience in Power Plant design(Chilling plants, Boiling plants). Coursework or prior work experience in Heating, Ventilation & Air Conditioning (HVAC) Design. Coursework or prior work experience in Thermo , Fluid Dynamics, Chiller and Boiler plant and/or Thermodynmapics/Fluid Flow. Education: Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor or Master's degree in Mechanical Engineering. GPA of 3.0 or higher (no rounding) Eligibility Requirements & Program Information: Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application posting OR currently participating in a Disney College Program or Disney Internship Be at least 18 years of age Possess unrestricted work authorization Have not completed one year of continual employment on a Disney internship or Disney College Program Additional Information: • Be compliant with The Disney Look appearance guidelines • Able to have a consistent, reliable work schedule throughout the internship • Fully available Monday thru Friday, PST for the duration of the internship, 40 hours each week • Able to provide own housing for the duration internship program in the Anaheim, CA area • Able to provide/have reliable transportation to/from work Pay Transparency: The pay rate for this role as an undergraduate in CA is $30.00 /hr. The pay rate for this role as a graduate student in CA is $35.00/hr. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: *************************************** Job Posting Segment: Worldwide Safety, Health, Engineer & Sourcing Job Posting Primary Business: Facility Planning and Global Initiatives Primary Job Posting Category: Engineering Intern Employment Type: Full time Primary City, State, Region, Postal Code: Anaheim, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-26