Top Mechanical Inspector Skills

Below we've compiled a list of the most important skills for a Mechanical Inspector. We ranked the top skills based on the percentage of Mechanical Inspector resumes they appeared on. For example, 24.1% of Mechanical Inspector resumes contained Final Inspection as a skill. Let's find out what skills a Mechanical Inspector actually needs in order to be successful in the workplace.

The six most common skills found on Mechanical Inspector resumes in 2020. Read below to see the full list.

1. Final Inspection

high Demand
Here's how Final Inspection is used in Mechanical Inspector jobs:
  • Performed receiving/in-process assembly/and final inspection.
  • Performed highly detailed in-process and final inspection on the Peacekeeper guidance system missile.
  • Assume the lead position and quality control responsibilities including in-process and final inspections.
  • Performed final inspection of jet engine components to customer drawings and Government specifications.
  • Worked closely with customers/operators during in-line, in-process, and final inspections.
  • Assisted in development and monitoring processes and final inspection systems.
  • Performed final inspection of customer end items/finished goods.
  • Conducted Source/ First Article/In-process and final inspections.
  • Perform receiving/final inspection of out-sourced jobs.
  • Performed inspections of first article, in process, audits, and final inspection of complicated and close tolerance machined parts.
  • Perform first piece, in-process, and final inspection using a variety of measurement tools, and visual inspection of welds.
  • Diagnosed faults, obtained necessary repair parts and ensured parts were properly installed bringing equipment to 10/20 status before final inspection.
  • Help to maintain high quality production parts by inspecting first article, in-process and final inspection using complex inspection equipment.
  • Perform detailed review of Device History Records and labels as part of final inspection and release activities for finished products.
  • Administered scheduled inspections to verify any hidden damage to aircraft, as well as conducted final inspections on completed maintenance.
  • Perform first article, in process, and final inspections on high precision and high tolerance manufactured medical products.
  • Conducted First Article, In-process, and Final Inspection functions and prepared quality documents for shipping product to customers.
  • Ensured that CoC's and Final Inspection reports were issued to the correct part, job and serial numbers.
  • Inspect parts on surface plate for first piece, in-process and final inspection using all standard mechanical measuring instruments.
  • Performed Incoming, in-process, roaming, and final inspection of products and parts to specified tolerances.

Show More

2. Mechanical Parts

high Demand
Here's how Mechanical Parts is used in Mechanical Inspector jobs:
  • Performed incoming, first-piece, in-process and final inspection on mechanical parts of hydraulic pumps.
  • Write and File None Compliance Reports, first articles in mechanical parts and PC boards.
  • Assembled, adjusted, tested and replaced mechanical parts that need repair daily.
  • Measure mechanical parts at incoming inspection as well as reading mechanical drawings.
  • Inspected precision machined mechanical parts produced in house and by vendors.
  • Worked in receiving inspection and visually inspected electrical/mechanical parts before going out to plant to be assemblied.
  • Structured set up of mechanical parts and machined parts with use of surface plate and optical comparator.
  • Blueprint Interpretation in mechanical parts and in populated and unpopulated PC boards.
  • Perform incoming inspection on a wide variety of non-standard, tight toleranced mechanical parts.

Show More

3. Mitutoyo CMM

high Demand
Here's how Mitutoyo CMM is used in Mechanical Inspector jobs:
  • Program and operate Mitutoyo CMM using MCOSMOS for performing first article and in-process and final inspections.
  • Program and operate Mitutoyo CMM with GeoMeasure 6000 software.
  • Operated Mitutoyo CMM equipped with Geopak 2000 software.
  • Use Mitutoyo CMM, automated optical comparator, Acuvu comparator.
  • Operated Zeiss and Mitutoyo CMM's as well as touch and learn programming using Calypso software for Zeiss Eclipse CMM.

Show More

4. Ensure Compliance

high Demand
Here's how Ensure Compliance is used in Mechanical Inspector jobs:
  • Performed weekly internal audit to ensure compliance on linear calibration tools in accordance with engineering specification requirements.
  • Inspected complex hardware at customer sites using multiple measuring devices to ensure compliance with military specification tolerances.
  • Measured close tolerance dimensions in millimeters to ensure compliance with specifications.
  • Measured clips dimensions to ensure compliance with specifications.
  • Performed First Article Inspection on Assemblies and Sub-Assemblies to ensure compliance to design specifications.
  • Review data packages to ensure compliance with design approval.

Show More

5. Micrometers

high Demand
Here's how Micrometers is used in Mechanical Inspector jobs:
  • Handled mechanical measurement hand tools (Calipers, Micrometers, Gauges, Hardness test, MP test, etc.)
  • Take measurements using micrometers to determine if parts are within specified tolerances based on manuals and drawings.
  • Inspected machined, stamped, and molded parts using optical projector, micrometers, and calipers.
  • Trained in the use of micrometers, calipers, and other measurement tools.
  • Utilized calipers, depth and shore hardness gauges, and micrometers.Measured automatic control valve dimensions to ensure compliance with specifications.
  • Position required reading blueprints (Solidworks), utilizing instruments such as micrometers, gauges, caliper, etc.
  • Obtain radius and diameters of implants and instruments with use of calipers, micrometers, and comparators.
  • Utilize tooling including calipers, micrometers, gauges, optical comparator and CMM.
  • Inspected incoming parts using micrometers, vernier calipers, CMM, optical comparator.
  • Used dial calipers, digital height gage, dial indicators and micrometers.
  • Maintained and operated optical comparator, verniers, micrometers, chatillon and other equipment.
  • Use of Vernier Calipers, Micrometers, Surface Plate, Height Gage, Angle and Radius Gages and Pin Gages.
  • Utilize tools such as micrometers, calipers, comparators, and other gages to measure dimensions and record data.
  • Used micrometers, vernier and dial calipers, dial indicators, protractors, height gages, borescopes,
  • Used specialized tools too include torque wrenches, multi meters, and micrometers for precision installations.
  • Performed variety of dimensional inspections using different tools; Surface plate, calipers, micrometers, comparator, height gage.
  • Used Trimos Height gages, optical comparators, air gaging, sine plates, micrometers, and calipers.
  • Verified machined parts using optical comparator, bore gages, micrometers, calipers and Sunnen gages.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Height Gauges

high Demand
Here's how Height Gauges is used in Mechanical Inspector jobs:
  • Performed manual inspections on detail parts using both digital and dial height gauges with a granite surface plate.
  • Provided QA of parts and materials for IBM using height gauges, CMM
  • Inspected small parts for micro electronics industry using micrometer, microscope, comparator, RAM, dial indicators, height gauges.
  • Use of Height gauges, verniers, scanners, dial indicators, micrometers, etc.
  • Use of PIN GAUGES, CALIPERS, HEIGHT GAUGES, DEPTH GAUGES.
  • Used surface plate, Optical comparator, height gauges, calipers, gauge blocks and pins for physical inspection on parts.

Show More

7. Optical Comparator

high Demand
Here's how Optical Comparator is used in Mechanical Inspector jobs:
  • Experience in measurement tools required (Gauges, Calipers, thickness gauges, Optical Comparators, etc).
  • Used optical comparator for small parts and large quantities.
  • Use of profilometer, optical comparator, & cordax machine.
  • Thread gages, plug gages Use of Optical comparator
  • Inspected components with + .002 tolerance using optical comparator to ensure results are within tolerance.
  • Use optical comparator to x-ray finished preforms for proper spacing.

Show More

8. ISO

high Demand
Here's how ISO is used in Mechanical Inspector jobs:
  • Report failures to Inspection supervisor and department supervisor.
  • Provided group, squadron commanders and supervisors with an unbiased assessment of assigned weapon systems, maintenance programs, and resources.
  • Perform visual inspection using ISO's & P&ID's to verify specifications and design criteria are met.
  • Correct all errors found on P&ID's and isometric drawings and deliver to engineering for approval.
  • Inspected critical dimensions, to print, and visual comparison for paint, platting, and finish.
  • Code Enforcement, Plan Review, Supervisory Experience, Led Code Review Board, Mechanical Code Instructor
  • Comply with military standards, ISO 9001 Certification and AS 9100 2000 Certification.
  • Assisted QMS team with company ISO 9001:2008 implementation for global company ISO certification.
  • Helped employees understand and apply ISO 9001 standards at the local site.
  • Maintain documentation that conforms to ISO 13485:2003, FDA & GMP protocols.
  • Completed ISO 9001: 2000 Internal Auditing and GD&T certification.
  • Reported out-of-spec conditions to supervisors, which has avoided many costly errors.
  • Support compliance of ISO and Business Management System policies and procedures.
  • Develop Documentation Control Plan and Procedures for ISO-9000 and QS-9000 Certification.
  • Gained familiarity with and responsible for practicing guidelines under ISO 17025:2005.
  • Commended by supervisors and peers for a job well done.
  • Well versed in ISO 9000 procedures and audit functions.
  • Assist shift supervisor organizing work and instruct new technicians.
  • Trained for FDA audits and ISO 13485 procedures.
  • Served as liaison to the Maintenance Battalion Detachment.

Show More

9. Inspection Reports

high Demand
Here's how Inspection Reports is used in Mechanical Inspector jobs:
  • Recorded data for inspection reports and discrepancy reports for trace ability.
  • Prepared inspection reports in accordance with established procedures.
  • Identified construction deficiencies and completed daily inspection reports.
  • Prepare detailed inspection reports per customer request.
  • Prepare Cert package, Inspection reports, and get parts ready to ship in job that will go out every week.
  • Filled out inspection reports, use of power tools and communication with management on orders for company's shipping
  • Inspect machined parts, maintain calibrations, generate inspection reports and procedures, final and receiving inspection.
  • Design processes and procedures for QA department, which included creating excel inspection reports.
  • Created reports, internal and customer facing, including First Article Inspection Reports.
  • Prepare Inspection Reports, Work Lists, Certificates, and Welding Procedures.
  • Write Test and Inspection Reports describing results, recommendations and needed repairs.
  • Filled out inspection reports and created non existing ones.
  • Prepared first article inspection reports.
  • Facilitate processing of inspection reports to ensure timely payments to contractor for work completed.
  • Create inspection reports Inspect plated/powder coated/painted parts to specifications.
  • Use of Blue Max, Omnifi and NCR Databases for part verification, inspecting documentation and creation of inspection reports.
  • Prepared inspection reports to specify nature of results in inspection of parts.
  • Documented inspection reports, and completed assignments in a timely manner.
  • Generated detailed 1st article inspection reports (ie.

Show More

10. Mechanical Equipment

high Demand
Here's how Mechanical Equipment is used in Mechanical Inspector jobs:
  • Witness the commissioning of mechanical equipment; plumbing equipment; fire protection equipment and electrical equipment
  • Managed contractors in all aspects of installation of mechanical equipment.
  • Repair and Maintaining Mechanical Equipment.
  • Examine all mechanical equipment to ensure that all scheduled PMs are being performed to prevent premature equipment failure.
  • Assigned to the inspection of machine rooms, laboratories and mechanical equipment.
  • Operate various types of mechanical equipment.
  • Provided special inspections of mechanical equipment upon site delivery for conformance to approved submittals.
  • Verify through field inspections all Steel structures and mechanical equipment is in accordance with safety, environmental and health regulatory standards.

Show More

11. GD

high Demand
Here's how GD is used in Mechanical Inspector jobs:
  • Read and interpret GD&T blueprints, and engineering drawings in accordance with local inspection criteria/ requirements and customer specifications.
  • Interpret mechanical drawings per ASME Y14.5 to evaluate dimensional and geometric compliance (including GD&T).
  • Perform first article on engineering design / drawing and updated revision and GD&T.
  • Trained in interpreting GD&T and ASME drawings.
  • Use and Interpretation of GD&T engineering drawings.
  • Received a GD&T Certificate.
  • Use GD&T to inspect parts for tight tolerances such as true position of .003 of an inch.
  • Read blueprints with GD & T, welding, wiring etc.
  • Assisted vendors to produce quality products by evaluatingdocumentation for accuracy.
  • Read mechanical blue prints and have knowledge of Geometric Dimensioning and Tolerances (GD&T).
  • Project inspection for a 130-MGD wastewater pump station.
  • interpret blueprints (GD&T), etc.
  • Skilled in GD&TDocument product inspection and adherance to specifications and standards.
  • LEAN / ( STRONG) Gd&t part inspection.

Show More

12. Aerospace

high Demand
Here's how Aerospace is used in Mechanical Inspector jobs:
  • Inspected mechanical components for aerospace industry for compliance to government specifications and blueprints.
  • Perform Mechanical Inspection of precision machined metals for military and aerospace applications.
  • Performed incoming inspection of classified aerospace and military communication equipment.
  • Inspected mainly aerospace and microwave communication parts.
  • Inspect parts for incoming, OEM, in-process and final shipments of high- reliability, aerospace and defense clients.
  • Full inspection of high-pressure composite wrapped cylinders for the Aerospace industries.
  • Perform First Article and final inspection on machined parts for aerospace.

Show More

13. State Inspections

high Demand
Here's how State Inspections is used in Mechanical Inspector jobs:
  • State Inspections mechanic/servicing and repair of trailer trucks, automobiles, chassis and other vehicles.
  • Preform body work, welding, and Pennsylvania State Inspections.
  • State Inspections/ Emissions, General maintenance
  • Perform State inspections and service vehicles
  • Operate, inspect, and repair vehicles and equipment, perform state inspections, minorbody work.
  • complete vehicle state inspections, review and complete inspection paperwork.
  • Service Work Repairs / Perform Road Test Vehicles / Diagnosis State Inspections / Associated Repairs
  • Diagnose and Repair cars Test Emissions State inspections
  • Worked part time as a mechanic pulling engines ,oil changes ,state inspections,

Show More

14. Hand Tools

high Demand
Here's how Hand Tools is used in Mechanical Inspector jobs:
  • Diagnosed and repaired problems with chassis and containers using electric gas, arc, other welding equipment and hand tools.
  • Inspected, calculated and repaired various postal containers utilizing hand tools such as drills and rivet guns
  • Examine parts for damage or excessive wear, using hoist, cranes and hand tools.
  • Performed calibration of hand tools, and also supported the company with Source Inspections.
  • Performed inspections on First Article and in process components using various digital and dial hand tools as well as stereo microscopes.
  • Inspect precision machined parts using hand tools, manual cmm, Create First Article dimension reports using Excel.
  • Used optical comparator, bore gages and all types of measuring hand tools.

Show More

15. CNC

average Demand
Here's how CNC is used in Mechanical Inspector jobs:
  • Performed first article inspection on machine parts made from 4th-5th axis CNC Mills and Lathes.
  • Conducted first article, in-process, final and incoming inspection for CNC and assembly manufacturing
  • Joined Armstrong in 2001 as a CNC Mill Machinist with a twenty-year background.
  • Develop sampling and measurement routine (CNC), automated Inspection.
  • Perform First Piece CNC Inspection using CMM.
  • Perform First Piece inspections of first-run pieces off the CNC machines in a timely manner to facilitate production runs.
  • Inspected circuit board dimensions using calipers and video scope.Also worked as CNC router setup /operator
  • Used Numerex and Zeiss CNC Coordinate Measuring Machines.

Show More

16. FAA

average Demand
Here's how FAA is used in Mechanical Inspector jobs:
  • Prepared reports of faulty engines/components and documentation in accordance with FAA regulations and Air Force Guidelines.
  • Coordinated maintenance to maximize flight operations on aircraft according to FAA regulations.
  • Maintain aircraft and systems in accordance Military, FAA & OEM manufacturers specifications & standards.
  • Input all paperwork in accordance to FAA regulations on SAAB 340B, CRJ 900 Aircraft.
  • Preformed 135 inspections and worked with FAA to place new aircraft on 135 certificates.
  • Ensured compliance of engineering requirements and FAA standards of Aircraft assembly areas.
  • Inspected RII items and signed maintenance logbooks to ensure FAA compliance.
  • Performed final and in-process inspection for this FAA repair facility.
  • Inspected jet engine parts to FAA standards.
  • Leather maintenance/Final Inspection Provide FAA approved leather maintenance procedures designed to extend the life and repair of leather aircraft seats.
  • Perform inspections and repairs in accordance with customers programs and applicable FAA Regulations.
  • Utilized my airframe and powerplant repair experiences and systems knowledge of aircraft to maintain FAA and manufacturer regulations.
  • Authorized FAA repair completed using approved aircraft manuals and methods,following pre-determined sequence of work.
  • Contacted suppliers/vendors about Purchase Orders, B.O.M's, and various FAA documents.

Show More

17. Raw Materials

average Demand
Here's how Raw Materials is used in Mechanical Inspector jobs:
  • Promoted to inspect incoming raw materials
  • Inspect, test and measure raw materials, products, installations or work conformance to specifications as noted on blueprints.
  • Preformed Receiving (raw materials and component parts), In-process, and Final Acceptance Inspections with customer.
  • Maintained daily retention samples at every stage of production from raw materials to finished goods.
  • Inspect incoming raw materials, parts and assemblies.
  • Reason for Leaving: Lay Off due to Company Closed Responsibilities: Check the raw Materials to be used in production.

Show More

18. QC

average Demand
Here's how QC is used in Mechanical Inspector jobs:
  • Assisted in-house QC in checking weld mapping and mechanical completion at end of Phase I construction of a U.S. Nitrogen plant
  • Performed hourly QC checks on all packaging lines during 8-hour shift and recorded results on designated forms.
  • Performed welding and mechanical inspections as assigned by QC management during a five week refueling outage.
  • Reason for leaving: Efficiency of QC had become severely compromised by production influences.
  • Generate and complete critical QC Documentation and maintain Level 2 Inspection stamp.
  • Field QC Manager over all pressure testing (pneumatic & hydrostatic).
  • Operated Virtek QC 2D Laser Scanner.

Show More

19. Hvac

average Demand
Here's how Hvac is used in Mechanical Inspector jobs:
  • Interfaced effectively with other HVAC inspectors in coordinating inspection operations.
  • Performed cleanliness, fit-up, and final welding inspection on ASME piping, AWS D1.1 structural, and HVAC components.
  • Reason for leaving: The HVAC only inspector positions were eliminated by the State of Idaho on 01/17/2012.
  • Examined mechanical HVAC work of the project to ensure proper quality and adherence to safety standards
  • Inspect HVAC commercial and residential projects for code compliance, Plan review
  • Prepared Mechanical designs for the HVAC systems used in the project.
  • Inspected the HVAC work for MEP commissioning group.
  • Inspect HVAC system per the approved drawings.
  • Inspected the installed equipment and related work pertaining to hvac/r equipment that was listed on the permits issued for mechanical work.
  • Performed on-site HVAC and Plumbing inspections ensuring code compliance to local city, state, federal and standard building codes.

Show More

20. Troubleshoot

average Demand
Here's how Troubleshoot is used in Mechanical Inspector jobs:
  • Directed 10 personnel involving testing/troubleshooting highly sophisticated F14 aircraft weapon systems.
  • Performed avionics and mechanical troubleshooting and recommended corrective actions.
  • Demonstrated superior troubleshooting skills with emphasis on system diagnostics.
  • Used effective troubleshooting techniques on electrical components and wiring.
  • Tested and troubleshoot switchboards that contains electrical components.
  • Conducted analysis and troubleshoot machinery.
  • Test components and complete assemblies using calibrated test and measuring equipment, apply problem solving techniques to troubleshoot and repair equipment.
  • Certified in Cracking Operations, as well as Hydraulic slide valve operations/ maintenance/ troubleshooting.
  • Specialized in the troubleshooting, inspection and field repair of TFE 731 jet engines.
  • Assisted and monitored technicians and engineers in the troubleshooting and repair of malfunctioning systems.
  • Perform Inspection, alteration, Repair, Troubleshoot, Remove and Re install.
  • Performed troubleshooting, repair, service and maintenance on the HMMWV series vehicle.
  • Provide assistance with troubleshooting and repair technique on various aircraft systems & structures.
  • Inspect, repair, adjust troubleshoot, and replace components as required.
  • Work with the engineers to troubleshoot print or tolerance errors.
  • Assist engineers in troubleshooting electro-mechanical, time-sensitive issues during assembly and test.
  • Follow strict state guidelines.Skills UsedComplete brake service, mechanical troubleshooting and repair.
  • Operate and inspect diagnose defects, troubleshoot air, electrical and hydraulics, torrent , and sentry system and using schematics.
  • Perform inspection, troubleshooting, and functional test on Electrical subassy's for the Wafer Polishing Tool.
  • Performed PT6-67D engine inspection, troubleshooting and complete engine components replacement and performed operational checks.

Show More

21. API

average Demand
Here's how API is used in Mechanical Inspector jobs:
  • Advanced rapidly to Team Lead performing daily production inspections in quality ensuring seamless development and inspection processes.
  • Have trained numerous personnel for API/AWS Certifications and tutored numerous equipment engineers.
  • Conduct welder qualification tests in accordance with the project specifications and API 1104 standards.
  • Completed API inspections and reports on.
  • Implemented and managed a $500,000 capital project at effluent to replace two nickel lamellas along with four progressive cavity pumps.
  • Gas supply to customers safely and rapid response, Customer Support, Safety assurance thorough inspection per quality control set protocol.
  • Contract) Performed TAR visual inspections on variety of refinery and chemical process units to API codes and company standards.
  • Remained in assignment at Kraton until 2012 when moved to support capital projects.
  • Performed API external and CUI inspections on piping and equipment plantwide.
  • Input date and monitor the Ultrapipe program for thickness monitoring.

Show More

22. Electrical Systems

average Demand
Here's how Electrical Systems is used in Mechanical Inspector jobs:
  • Replaced assemblies and or modified mechanical and electrical systems and their related components.
  • Directed comprehensive overhauls of aircraft electrical systems.
  • Assist with diagnostics of electrical systems, for the Caiman, RG33, Cougar and Max Pro.
  • Experience working on automotive electrical systems including wiring harness, starting, and charging systems.
  • Repair and service air conditioning, heating, engine-cooling, and electrical systems.
  • Monitored construction plans and blue prints, mechanical systems and electrical systems.

Show More

23. Ansi

average Demand
Here's how Ansi is used in Mechanical Inspector jobs:
  • Provide general support and material supply of aviation services & products for local & transient General Aviation.
  • Maintain the authority's Safety Compliance including the Transit Authority s Wayside Certification.
  • Interpret ANSI-Y14.5, Perform source and 1st article inspection at supplier locations.
  • Advanced knowledge of GD&T Specifications and ANSI Standards.
  • Well versed in reading mechanical drawings, ANSI standards.
  • Performed hydrostatic, pneumatic, and drop test on ASME III, and ANSI B31.1 power piping.
  • Handled daily flight line support for numerous fighter aircrafts and transient aircrafts.

Show More

24. Oil Changes

average Demand
Here's how Oil Changes is used in Mechanical Inspector jobs:
  • Complied with state vehicle requirements, including engine safety and combustion control standards, and tune ups oil changes.
  • Perform services ranging from oil changes to motor replacement on gas and diesel vehicles.
  • Performed standard oil changes, lube procedures, and tire replacements.
  • Oil changes and transmission filter service.
  • Tune -ups, oil changes, brakes and rotors, exhaust work, motor overhaul, Wheel bearing
  • Worked as a inspection mechanic part time ,doing state inspection,brakes,oil changes,batterys

Show More

25. As9102

average Demand
Here's how As9102 is used in Mechanical Inspector jobs:
  • Fill up AS9102 form and prepare packages to present to source inspection to get bought off.
  • Complete and submit first article documentation (AS9102) to customers.
  • Perform first article and final inspection per AS9102 requirements.
  • Complete First Article Inspections according to AS9102.
  • Perform First Article Inspections per AS9102 standard.
  • Prepared thorough AS9102 first articles which met on-time delivery efforts to boost customer confidence in assuring future orders.

Show More

26. Machine Shop

average Demand
Here's how Machine Shop is used in Mechanical Inspector jobs:
  • Experienced in both Machine Shop inspection and Electronics manufacturing facilities.
  • Performed 1st article inspections of parts coming out of machine shop to verify set-ups and compliance to engineering drawings.
  • Worked closely with in-house machine shop for proper interpretation of GD&T on prototype and production mechanical drawings.
  • Executed daily operations to insure all work coming out of machine shop complied with blueprint specifications.
  • Experienced with In-Process, Final Inspection and Customer Witness in a Nuclear Manufacturing machine shop environment.
  • Cause and corrective actions on all defective hardware received and supplied from in-house machine shop
  • Support the machine shop and fabrication shop.

Show More

27. MRB

average Demand
Here's how MRB is used in Mechanical Inspector jobs:
  • Review MRB's to disposition on rejected parts and interface with Vendors, Purchasing concerning MRB and Quality Issues.
  • Interfaced with engineering to resolve part, supplier, and documentation issues through the ECO and MRB processes.
  • Work closely with engineering on MRB and engineering issues, Interface with managers and people at all levels.
  • Reduced average MRB dwell time after disposition from over 100 days to less than seven.
  • Participate in MRB activities and disposition materials in accordance with MRB decisions.
  • Reduce MRB inventory from $260,000 to zero in 4 months.
  • Audited MRB system for work plans and offered recommendations for improvements.
  • Directed actions within departmental groups to maintain MRB and MRA issues.
  • Segregated all non-conforming materials in MRB cage for disposition.
  • Write up MRB tags for non-conformance parts.
  • Participate in MRB to resolve problems.
  • Initiate, create and follow up with SA118, DR and MRB discrepancies.

Show More

28. Cessna

average Demand
Here's how Cessna is used in Mechanical Inspector jobs:
  • Performed work on aircraft such as Cessna, Piper, Beech craft and Grumman aircraft.
  • Provide line and component maintenance for part 121 and 135 airline with De Havilland, Beech and Cessna aircraft.

Show More

29. NDE

low Demand
Here's how NDE is used in Mechanical Inspector jobs:
  • Monitored licensed contractors on major construction projects; ensured construction was being performed by licensed contractors under City-issued permits.
  • Recommended by upper management to qualify as a nuclear mechanic inspector to perform oversight and inspection for apprentices.
  • Worked in a dangerous and fluid environment in varying conditions maintaining mechanical systems safely and under critical deadlines.
  • Check functioning of newly installed/ outgoing equipment to evaluate system performance under actual operating conditions.
  • Interpreted military specs, certification from independent test labs and inspection to other government specifications.
  • Investigated and responded to complaints regarding illegal construction, safety, and/or hazardous conditions.
  • Perform mechanical inspections for extended warranty companies to determine coverage.
  • Participated in continuous improvement efforts through independent cost reductions.
  • Submit reports on line to extended warranty companies and individuals
  • Work independently in scheduling and executing inspections.
  • Perform vehicle inspections for extended warranty companies.
  • Understand the engineering design & blueprints, and overlook the relocation and installation of Stainless Steel Duct work at both locations.
  • Hang gas tanks under the chassis and inspect the work of others to insure all the safety procedures have been met.
  • Insure the proper understanding and application of safety and environmental policies and procedures by all personnel in the area of responsibility.
  • Supported Owner/User Inspectors with NDE tracking, Weld Mapping, Rod Selection/Usage and alloy verification on consumables and as-welded fitments.
  • Assist Project Manager and Superintendent by coordinating with Sub-Contractors and USA-COE personnel to resolve field noted design deficiencies.
  • Responded to new challenges and contributed to the accurate production of parts in order to exceed customer demand.
  • Work independently and make value judgments regarding engineering drawings, process controls, written and oral instructions.
  • Attended many educational classes and seminars to enhance my knowledge of the State Plumbing & Mechanical Codes.
  • Conduct Inspection on all underground piping prior to leak testing, coating, wrapping and holiday testing.

Show More

30. R

low Demand
Here's how R is used in Mechanical Inspector jobs:
  • Assigned to Iroquois Gas to monitor/witness procedure qualifications, welder qualifications, receipt inspections, and vendor surveillance.
  • Performed Hopper Car inspections and brake repairs -Administered preventive maintenance programs -Performed welding tasks -Operated fork truck
  • Mounted assembled components on chassis panel and connects components according to work order specifications.
  • Reviewed suitability of products specifications, working with engineers to improve inspection methods.
  • Perform maintenance modification to general aviation aircraft and perform on-call maintenance to aircraft.
  • Performed civil/mechanical/structural welding inspection at meter station for Mich-Con in Romeo, MI.
  • Witness of electrical, mechanical, and hydraulic equipment installation and commissioning.
  • Performed phase maintenance/inspections /modifications and engine/pylon changes on Beech jet 400 aircraft.
  • Performed various inspections during nuclear fuel manufacturing process according to written specifications.
  • Experience in diagnosing automobile issues, conducting preventative and immediate automobile care.
  • Verify installations in commercial and industrial mechanical systems match approved plans.
  • Inspected 200 pieces of equipment as a quality assurance/quality control inspector.
  • Collaborated with engineers to update Quality Assurance Procedures and inspection methods.
  • Certified through Northwest Community College in blueprint reading and mechanical inspection.
  • Received three consecutive Outstanding ratings during inventory audit and inspection.
  • Insured that all electrical installations met code and military specifications.
  • Installed insulation in cabinet according to blueprint specifications.
  • Involved with redlining of manufacturing drawings.
  • Performed container/chassis inspections for damages.
  • Worked the Dock to Stock backlog down to zero and developed a working process of expediting product through the quality system.

Show More

31. Inspection Results

low Demand
Here's how Inspection Results is used in Mechanical Inspector jobs:
  • Documented all required inspection results using SAP transactions.
  • Entered plan review data and inspection results on the City of Glendale's inspection database.
  • Review and assess Contractor/Subcontractor QA/QC Plans and Procedures including test and inspection results.
  • Documented inspection results, completed reports, maintained logs.
  • Record inspection results in data base.
  • Record inspection results on spreadsheet.
  • Provide respectful and courteous customer service inspection results to contractors, property owners,engineers on record and field personnel.

Show More

32. FAI

low Demand
Here's how FAI is used in Mechanical Inspector jobs:
  • Cited Contractors and home owners for compliance failures and followed up at later dates to ensure all city codes were met.
  • Preformed VA Safety and emission Inspection on vehicles, failed inspections repairs lead to an increase in revenue for the shop.
  • Generate QC documents, First-Article Inspection Report (FAIR) and Non-Conformance Material Report (NCMR) per QMS requirements.
  • Conclude the cause of failure to listed parts and their warranty applicability, ultimately deciding warranty coverage.
  • Photograph and document any and all failed parts or components being questioned by extended warranty companies.
  • Maintained inventory of failed parts, coordinated with warehouse manager for return and repair to vendors.
  • Review drawings and Purchase Orders, verify Certifications, AS9102 FAIR, dimensional inspection.
  • Failed parts documentation were sent to the corporate office for verification through department heads.
  • Supported FAI, Incoming, Development and Prototype Products for DLT Advanced Mfg.
  • Perform first and last piece inspection and First Article Inspection (FAI).
  • Performed FAI and Layout inspection using CMM and mechanical precision measuring tools.
  • Performed first article inspection (FAI) for new and revised parts.
  • Record temperature measurements of equipment and compare values to prevent failure.
  • Prepare FAI reports, and track trends using SPC processes.
  • Input data on equipment failures to the MTA data base.
  • Cross sectioning methods also used for troubleshooting in Failure Analysis.
  • Diagnosed for possible mechanical failures, electrical malfunctions and leaks.
  • Inspect for and determine cause of failure.
  • Study seal failures and there cost.
  • Gather measurement data for FAI Reports.

Show More

33. SPC

low Demand
Here's how SPC is used in Mechanical Inspector jobs:
  • Maintained hard and soft back-up inspection files on Statistical Process Control (SPC) data and all specialized calibrated equipment.
  • Preformed inspections and SPC checks of machined parts and entered findings into PC software.
  • Gather and prepare SPC data for both internal and external customer requests.
  • Recorded, developed, and evaluated SPC charts.
  • Well versed in real time and SPC with the use of a CMM.
  • Collected and Monitored Statistical process control (SPC) data -Audited production quality -receiving inspection -final inspection (Visual and mechanical)

Show More

34. NCR

low Demand
Here's how NCR is used in Mechanical Inspector jobs:
  • Designed and implemented new quality records management procedures which increased efficiency and reduced labor requirements.
  • Created lubrication role for increased reliability of rotating equipment.
  • Generate NCR and follow-up with disposition verification.
  • Repair work generated by Safety & Emission Inspection increased average repair invoice by 70% during my tenure at the shop.
  • Investigated and documented non-conforming product reports (NCR's); both internal generated and customer complaint generated.
  • Worked closely with the operations and product teams to create products to increase efficiency in field operations.
  • Increased the dependability for rock breaker, primary crusher, and drive with strategic grouting methodologies.
  • Oversee, evaluate and approve reconstruction of concrete curbs as per the construction drawings.
  • Keep engineering in the loop and write the proper NCR for the needed repair.7.
  • Create NCR's and assure dispositions are carried out.
  • Steel / Pouring ConcreteWelding Plates on Pilings / etc.
  • Monitor concrete pours-slumps, air breaks, etc.
  • Quarantine NCR materials and notify appropriate vendors.
  • Concrete testing prior to pour.
  • Create Non Conformance Report (NCR) for components and assembly parts notcompliance to blue print specification for disposition by quality engineer
  • Witness torqueing and bolting of flanges, witness concrete testing for slump, moisture and air tests prior to pouring.
  • Generate detail NCR reports on defects that arise during the assembly process to Supervision in a timely manner.
  • Make recommendations to management to improve productivity, increase efficiencies, or cut costs.
  • Raise Non conformance report (NCR) and Discrepancy report ( DR).
  • Performed inspection on concrete foundations for Towers, Drums, and Heat exchangers.

Show More

35. Test Procedures

low Demand
Here's how Test Procedures is used in Mechanical Inspector jobs:
  • Close test procedures by performing stamp continuity and documentation review for inspection.
  • Interpreted OEM drawings, P&ID's and client specifications to determine inspection and test procedures.
  • Monitored line operations to intercept physical defects and to ensure weight control and correct physical measurements following Standard Test Procedures.
  • Perform quality assurance test procedures using Hydro-testing machine and Rockwell hardness testers.
  • Worked closely with design engineers, manufacturing engineers in developing test procedures and fixtures.
  • Performed final assembly inspection per acceptance test procedures before shipment.

Show More

36. New Construction

low Demand
Here's how New Construction is used in Mechanical Inspector jobs:
  • Perform QA/QC functions during new construction projects at numerous power plant facilities and all in house document control.
  • Provide vendor surveillance on new construction of equipment.
  • Inspect residential new construction single family dwellings.
  • General code enforcement and code verification Inspected new construction as well as existing buildings
  • Perform detailed inspections of new construction to assure conformance with contract drawings and specifications on 20 million dollar interior/exterior building modernization.
  • Inspected remodeling and new construction of single-family homes.

Show More

37. Data Entry

low Demand
Here's how Data Entry is used in Mechanical Inspector jobs:
  • Utilized data entry and data gathering BAAN and Intuit programs.
  • Trained six employee's as equipment operators, data entry and user personnel.
  • Inspected rail cars for safety * Overall repair of Rail Cars * Welding * Billing/Data Entry
  • Completed management performance metrics reports, staff evaluation, accounting data entry and clerical responsibilities for area manager reviews.
  • Inspected/Sterilized various ocular lenses Data Entry Shipping & Receiving Maintained a safe and cleanly work environment
  • Performed supply tracking through daily data entry to increase company organization.

Show More

38. Inspection Records

low Demand
Here's how Inspection Records is used in Mechanical Inspector jobs:
  • Prepared and maintained inspection records.
  • Perform plan review, material and code compliance *Maintain inspection records and computer input for public record.
  • Planned and scheduled inspection work load to satisfy multiple customer's needs and maintained inspection records.
  • Documented inspection results using AS9102 forms, and maintained accurate written product inspection records.
  • Maintained daily logs and supplement inspection records with photos.
  • Maintain inspection records for incoming material as well 1st.
  • Implemented a tracking system of all inspection records.
  • Maintain inspection records and generate monthly reports of all non-conformances.
  • Performed mechanical and visual inspections of all machined, sheetmetal and plastic parts to Customer drawings.Record and maintain accurate inspection records.

Show More

39. NDT

low Demand
Here's how NDT is used in Mechanical Inspector jobs:
  • Plant performing internal and external visual and NDT inspections on pressure vessels, storage tanks and piping.
  • Monitored hydro testing and NDT testing.
  • Conduct training, examination, and recertification of Non-Destruction Test (NDT) and welding personnel.
  • Performed mechanical testing, (Brinnel/Rockwell hardness methods) on parts before final NDT testing.
  • Performed visual external corrosion and internal erosion inspection utilizing NDT techniques on process piping and equipment during refinery turnarounds.
  • Inspect blade interiors meticulously utilizing NDT equipment and accurately document findings to ensure exceptional quality controlled products.

Show More

40. QA

low Demand
Here's how QA is used in Mechanical Inspector jobs:
  • Coordinated with QA testers for end-to-end unit testing and post-production testing using CMM programs.
  • Conducted QA inspections on Marine aircraft and depot-level maintenance of major aircraft systems.
  • Assisted LSI QA/QC inspection section with vehicle maintenance and parts requests.
  • Work closely with Project Managers, Engineering, QA and Purchasing.
  • Work closely with Purchasing, PM, QA and Engineering.
  • Maintained daily QC inspector reports and QA computer data base.
  • Performed QA/QC inspections during repairs and fabrication.
  • Performed QA/QC duties as required.
  • Performed internal and external inspection on vessels, exchangers, columns, furnaces and piping(QA) during shutdowns.
  • Company: QATARGAS Address: Ras Laffan Industrial City, State of Qatar

Show More

41. Dial Indicators

low Demand
Here's how Dial Indicators is used in Mechanical Inspector jobs:
  • Clean, maintain, repair and calibrate equipments such as dial indicators, fixed gauges.
  • Perform surface plate inspection using height gage, dial indicators, and dropindicators.

Show More

42. Machine Operation

low Demand
Here's how Machine Operation is used in Mechanical Inspector jobs:
  • Understand and follow plant safety rules including safe lifting practices and safe machine operation.

Show More

43. Quality Standards

low Demand
Here's how Quality Standards is used in Mechanical Inspector jobs:
  • Maintained records of investigations, quality performance and deviations from quality standards.
  • Enforced company quality standards with regard to product accuracy and appearance.
  • Verified purchased products from suppliers conform to company quality standards.
  • Recognized by Boeing and Lockheed Martin for excellent quality standards and placement in their direct supplier program.
  • Fit alignment for conformance with applicable drawings, specifications, documents and quality standards.
  • Contract Assignment) Provide Assistance in overall implementation and administration of quality standards and protocols.

Show More

44. Osha

low Demand
Here's how Osha is used in Mechanical Inspector jobs:
  • Ensured safety precautions complied with OSHA and EPA safety regulations resulting in no violation or accidents.
  • Ensured work was in safety compliance with MSHA/OSHA and to state code.
  • Insure OSHA and the Authority's Safety Compliance.
  • Helped achieve OSHA Star VPP Bronze and Silver awards for our facility.
  • Performed inspections on mechanical equipment for OSHA readiness.
  • Ensured unit compliance with applicable guidance such as Air Force Instructions, OSHA, safety, training, and environmental regulations.

Show More

45. Preventative Maintenance

low Demand
Here's how Preventative Maintenance is used in Mechanical Inspector jobs:
  • Developed and implemented quality control and preventative maintenance processes.
  • Perform preventative maintenance on company vehicles daily.
  • Performed Line Maintenance, A check inspection and preventative Maintenance Inspection on B 737-400 aircraft for US Marshal Service.
  • Provided preventative maintenance, performed oil changes, tune-ups, brake work, and tire repairs.
  • Prepared and administered preventative maintenance work orders.

Show More

46. Fuel Systems

low Demand
Here's how Fuel Systems is used in Mechanical Inspector jobs:
  • Serviced hydraulic units, oxygen systems, and fuel systems per system manuals.
  • Diagnosed fuel systems and minor and major engine faults.
  • Experience with propane fuel systems.

Show More

47. Annual Inspections

low Demand
Here's how Annual Inspections is used in Mechanical Inspector jobs:
  • Perform annual inspections and maintenance on Beech, Piper, Mooney, and all other like small reciprocating engine aircraft.
  • Completed all annual Inspections and repairs to flight school aircraft including Piper, Cessna, and Beech
  • Performed preventive maintenance and annual inspections on various types of flight training aircraft.
  • Performed Annual Inspections and repairs of various light piston and turbine powered aircraft.
  • Perform 25 hr., 50 hr., 100 hr., and annual inspections.
  • Provided field/flightline, trouble-shooting services, 100 hour and required Annual Inspections.

Show More

20 Most Common Skill for a Mechanical Inspector

Final Inspection30.1%
Mechanical Parts18.9%
Mitutoyo CMM9.1%
Ensure Compliance6.4%
Micrometers5.7%
Height Gauges3.6%
Optical Comparator3.3%
ISO2.5%

Typical Skill-Sets Required For A Mechanical Inspector

RankSkillPercentage of ResumesPercentage
1
1
Final Inspection
Final Inspection
24.1%
24.1%
2
2
Mechanical Parts
Mechanical Parts
15.2%
15.2%
3
3
Mitutoyo CMM
Mitutoyo CMM
7.3%
7.3%
4
4
Ensure Compliance
Ensure Compliance
5.1%
5.1%
5
5
Micrometers
Micrometers
4.5%
4.5%
6
6
Height Gauges
Height Gauges
2.9%
2.9%
7
7
Optical Comparator
Optical Comparator
2.6%
2.6%
8
8
ISO
ISO
2%
2%
9
9
Inspection Reports
Inspection Reports
1.9%
1.9%
10
10
Mechanical Equipment
Mechanical Equipment
1.8%
1.8%
11
11
GD
GD
1.6%
1.6%
12
12
Aerospace
Aerospace
1.5%
1.5%
13
13
State Inspections
State Inspections
1.5%
1.5%
14
14
Hand Tools
Hand Tools
1.2%
1.2%
15
15
CNC
CNC
1.2%
1.2%
16
16
FAA
FAA
1.2%
1.2%
17
17
Raw Materials
Raw Materials
1.2%
1.2%
18
18
QC
QC
1.1%
1.1%
19
19
Hvac
Hvac
1.1%
1.1%
20
20
Troubleshoot
Troubleshoot
1.1%
1.1%
21
21
API
API
1%
1%
22
22
Electrical Systems
Electrical Systems
1%
1%
23
23
Ansi
Ansi
0.9%
0.9%
24
24
Oil Changes
Oil Changes
0.9%
0.9%
25
25
As9102
As9102
0.9%
0.9%
26
26
Machine Shop
Machine Shop
0.9%
0.9%
27
27
MRB
MRB
0.9%
0.9%
28
28
Cessna
Cessna
0.8%
0.8%
29
29
NDE
NDE
0.8%
0.8%
30
30
R
R
0.8%
0.8%
31
31
Inspection Results
Inspection Results
0.8%
0.8%
32
32
FAI
FAI
0.7%
0.7%
33
33
SPC
SPC
0.7%
0.7%
34
34
NCR
NCR
0.7%
0.7%
35
35
Test Procedures
Test Procedures
0.7%
0.7%
36
36
New Construction
New Construction
0.7%
0.7%
37
37
Data Entry
Data Entry
0.7%
0.7%
38
38
Inspection Records
Inspection Records
0.7%
0.7%
39
39
NDT
NDT
0.7%
0.7%
40
40
QA
QA
0.6%
0.6%
41
41
Dial Indicators
Dial Indicators
0.6%
0.6%
42
42
Machine Operation
Machine Operation
0.6%
0.6%
43
43
Quality Standards
Quality Standards
0.6%
0.6%
44
44
Osha
Osha
0.5%
0.5%
45
45
Preventative Maintenance
Preventative Maintenance
0.5%
0.5%
46
46
Fuel Systems
Fuel Systems
0.5%
0.5%
47
47
Annual Inspections
Annual Inspections
0.5%
0.5%

10,747 Mechanical Inspector Jobs

Where do you want to work?