Mechatronics engineer entry level jobs

Job DescriptionAbout Revive Environmental Technology Revive Environmental Technology, LLC ("Revive") is a mission-driven environmental technology company focused on delivering rapid, permanent solutions for PFAS and other persistent environmental contaminants. Our flagship PFAS Annihilator systems are built on patented supercritical water oxidation (SCWO) technology and are setting a new standard in liquid waste destruction, including PFAS-laden AFFF concentrates and complex organic waste streams. Position Overview We are seeking a Mechanical Engineer Intern or Co-Op to further develop and scale our PFAS Annihilator SCWO technology. The position is based in Columbus, OH. The role reports to the Chief Technology Officer. How an internship or Co-Op would be different with Revive than other companies is we give real world challenges to solve to each team member, interns and Co-Ops included. Your work would be on a project that has meaningful contribution to Revive as a growing young company, and the learning opportunities are fast paced and mission critical. Key Responsibilities for your projects could be: Engineering Design & System Development Design, prototype, and iterate mechanical components and subsystems for Annihilator systems and support equipment. Assist in the selection and specification of mechanical equipment including pumps, valves, fittings, and materials for high-temperature/high-pressure environments. Support assembly, fit-up, and testing of newly fabricated equipment; identify and resolve mechanical interferences and installation issues. Operations Support and Troubleshooting Collaborate closely with site operators, technicians, and engineers to support day-to-day operations of the SCWO systems. Investigate and resolve mechanical failures or equipment anomalies, conducting root cause analyses and implementing corrective actions. Develop and implement maintenance procedures, equipment setup guides, and operating protocols for mechanical systems. R&D and Process Optimization Collaborate with chemical/process engineers to translate theoretical concepts into testable mechanical solutions (e.g., injection hardware, quench systems, thermal shielding, brine handling). Analyze test results, identify trends, and recommend mechanical or operational changes to increase system uptime, throughput, or maintainability. Assist in designing and executing long-duration reliability tests to characterize mechanical component performance over time under SCWO-relevant conditions. Required Qualifications Knowledge and/or experience in process engineering design. Strong safety record and mindset. Experience with CAD modeling Excellent problem-solving and cross-disciplinary collaboration skills. GPA of a 3.0 or better Preferred Qualifications Prior coursework with a "B" or better grade in Thermodynamics and Fluids Experience / prior exposure to sensor and actuator selection and integration Industrial experience. Familiarity with PFAS chemistry. Background in thermal reaction systems, heat integration, and fluid mechanics. Experience with fabrication, manufacturing, and good lab practices. Why Join Revive Contribute directly to solving one of the most pressing environmental challenges of our time. Work alongside an agile, mission-driven team combining deep science with practical field engineering. Be at the center of scaling up one of the first proven PFAS destruction systems to national and international markets. Competitive compensation and growth opportunities in a fast-scaling cleantech company.

As a Mechanical Engineer Intern, you will assist in the design, maintaining, and installing of mechanical systems for our processing equipment. To thrive in this role, you must... * College student pursuing a degree in Mechanical Engineering or related course * Strong interpersonal skills * Analytical and high attention to detail * Self-motivated and high attention to detail * Eager to work in a creative and problem solving environment * Look for ways to continuously improve our processes. About Precision Strip As the nation's largest toll processor, Precision Strip strives to do the exceptional every day. We are a team of collaborative problem solvers, dedicated to providing the best customer service. With our in-house engineering and technical group, we believe no problem is too big. Precision Strip is a drug free workplace and an Equal Employment Opportunity Employer. Applications may be completed online at ******************************** Learn more about Precision Strip by visiting ************************

CTI has been a leading AV provider for over 36 years. Since we began in 1988, our mission has been simple: to provide a fantastic customer experience. At CTI, our biggest asset is our people, and we know that sometimes the most awesome employees don't fit the typical mold. If you are hardworking, friendly, and know the importance of fantastic customer service, you could be a good fit at CTI. We have developed a collaborative and lively working environment, where the best and the brightest show up to work each day ready to have fun and employ their passion for and knowledge of technology in everything they do. This creative atmosphere helps us apply and share our skills with our clients, who seek quality, high-end AV, and Conference Solutions. So, what are we looking for? We are looking for an AV Design Engineer for our Columbus branch, whose attitude, skills, and work ethic will embody our mission “to provide a fantastic customer experience”-somebody passionate about AV. We take pride in employees, who are known in the industry as customer-focused problem-solvers who can get the job done. What are your responsibilities? - Design AV signal flows - Create AV design diagrams - Work with existing architecture and electrical framework to design AV rooms. - Keep up to date with new AV integration technology Will you fit in? -Our employees fearlessly embrace the company culture and applicants who merely want to punch in their timecards every day are not what we are looking for. -You can work independently with minimal guidance but aren't afraid to ask the right questions when you need help. -You have strong verbal and written communication skills and can be the face of our company to our clients. Does experience count? - Audio Visual Engineering Experience: 3 years minimum with designing AV signal flows and AV design diagrams, as this is not an entry-level position, and we need a talented engineer who can take our clients' ideas and help bring them to fruition. - Education: Associate degree is preferred, but not required. We take into account your experience/skill level and what you bring to the table as an individual. -Attitude and Aptitude: Are key! We need someone who is eager to learn and comes to work ready to tackle any situation. -Must be able to pass a criminal background check and a motor vehicle check. What's in it for you? At CTI, we know our company's success is directly correlated to the success of our employees. So, it's fitting that we thrive on and encourage employee growth, both professionally and personally. Our competitive compensation package includes: -A competitive base salary (DOE) -Employer-matched medical, prescription, and dental insurance (available after 60 days of employment) -Employer matched 401K up to 3% (after 6 months of employment) -Bonus eligibility that is based off a results-oriented incentive plan (after 3 months of employment) -A graduated PTO program, all major holidays off, as well as three “floating” holidays, available upon first day of employment -Special gifts for significant life events, such as marriage, the birth of a child, and buying a house -Cell phone reimbursement plan -Long- and Short-Term Disability 100% paid by CTI -Life Insurance 100% paid by CTI CTI. is an equal opportunity employer. We do not and shall not discriminate on the basis of race, color, religion, gender, age, national origin, disability, marital status, sexual orientation, or military status in any of its activities or operations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

OPPORTUNITY For an entry level engineer with an interest in designing refrigeration systems for large industrial and commercial facilities . Join an integrated team of architects, engineers, and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will develop a broad set of engineering competencies, technical design knowledge, consultation and problem-solving skills in an environment that values collaboration. POSITION Reports directly to the Manager of Refrigeration Engineering. Focuses on the design and integration of industrial ammonia, halocarbon, and chilled water refrigeration systems for the meat, dairy, and beverage industries. Responsibilities include design calculations, equipment selections, drawing preparation, specification writing, cost estimating, project review presentations, and construction coordination. This position will proactively work across multi-discipline design teams. QUALIFICATIONS BSME, BSMET, BSAE or related degree; EIT a plus Strong interest in applied thermodynamics, heat transfer, and fluid mechanics Familiarity with Revit, AutoCAD, and Excel a plus Strong work ethic and leadership capabilities Proven self starter with the ability to manage time and work priorities independently Curious in nature, with a desire to learn new concepts COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit *******************

The intern will assist the mechanical engineering team with design activities for Vertiv's liquid cooling systems. Tasks include 3D modeling, BoM updates, drawings creation, and support during design reviews. Exposure to Vertiv's Creo modeling standards and PLM workflows will be provided. Preferred Major/Field of Study: Mechanical Engineering Preferred Year: Junior or Senior Tools/Skills Exposure: Creo CAD, Oracle PD Cloud PLM

DNV is seeking a detail-oriented Pipeline Integrity Engineer to work in our Integrity Solutions and Compliance department. The Integrity Solutions and Compliance Department is dedicated to delivering innovative solutions and services to the pipeline industry. We work together with pipeline operators to manage and maintain their assets, providing technical expertise to navigate the evolving landscape of the energy transition. Our commitment extends to fostering diversity and inclusion and supporting the growth and development of our team. At DNV, you will find teams of skilled professionals who are committed to protecting people and the environment. We work collaboratively in global and inclusive teams where diversity is both prioritized and encouraged. We welcome new ideas that challenge existing practices. We seek individuals who are determined to make a positive impact. If you have a solution-oriented mindset, proactive nature, and teamwork skills, we invite you to join our team. This role is based at our DNV office in Dublin, OH. Further details regarding role-specific requirements will be shared during the interview process. What You'll Do Collaborate professionally with a team of Engineers, Consultants, ILI Analysts, and clients. Conduct data analysis from pipeline operators employing suitable methodologies. Manage projects and tasks assigned by team members. Document findings and deliver clear technical results. Write technical papers and present projects if desired. Attend industry conferences to learn about new technologies and develop projects. Respond to requests for proposals by developing a scope of work, schedule, budget, etc. Participate in business development with existing projects and customers to build and maintain relationships. What is Required B.S. degree or higher in Engineering. Ability to understand and address client needs. Proficiency in Microsoft Excel, Word, PowerPoint. Strong technical writing, problem-solving, critical thinking, and quick learning abilities. Detail-oriented, self-motivated, hardworking, and professional mindset. Capable of working both independently and as part of a team. Manage fast-paced, high-demand environments. Willingness to travel domestically and internationally. Strong written and verbal English communication skills. We conduct pre-employment drug and background screening. What is Preferred B.S. degree or higher in Material Science & Engineering, Mechanical Engineering, or Chemical Engineering. Experience working with clients/customers. *Immigration-related employment benefits, for example visa sponsorship, are not available for this position Generous paid time off (vacation, sick days, company holidays, personal days) Multiple Medical and Dental benefit plans to choose from, Vision benefits Spending accounts - FSA, Dependent Care, Commuter Benefits, company-seeded HSA Employer-paid, therapist-led, virtual care services through Talkspace 401(k) with company match Company provided life insurance, short-term, and long-term disability benefits Education reimbursement program Flexible work schedule with hybrid opportunities Charitable Matched Giving and Volunteer Rewards through our Impact Program Volunteer time off (VTO) paid by the company Career advancement opportunities **Benefits vary based on position, tenure, location, and employee election** DNV is a proud equal-opportunity employer committed to building an inclusive and diverse workforce. All employment is decided on the basis of qualifications, merit, or business need, without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. DNV is committed to ensuring equal employment opportunity, including providing reasonable accommodations to individuals with disabilities. US applicants with a physical or mental disability who require reasonable accommodation for any part of the application or hiring process may contact the North America Recruitment Department (**********************************). Information received relating to accommodation will be addressed confidentially. For more information **********************************************************************

DNV is seeking a detail-oriented Pipeline Integrity Engineer to work in our Integrity Solutions and Compliance department. The Integrity Solutions and Compliance Department is dedicated to delivering innovative solutions and services to the pipeline industry. We work together with pipeline operators to manage and maintain their assets, providing technical expertise to navigate the evolving landscape of the energy transition. Our commitment extends to fostering diversity and inclusion and supporting the growth and development of our team. At DNV, you will find teams of skilled professionals who are committed to protecting people and the environment. We work collaboratively in global and inclusive teams where diversity is both prioritized and encouraged. We welcome new ideas that challenge existing practices. We seek individuals who are determined to make a positive impact. If you have a solution-oriented mindset, proactive nature, and teamwork skills, we invite you to join our team. This role is based at our DNV office in Dublin, OH. Further details regarding role-specific requirements will be shared during the interview process. What You'll Do * Collaborate professionally with a team of Engineers, Consultants, ILI Analysts, and clients. * Conduct data analysis from pipeline operators employing suitable methodologies. * Manage projects and tasks assigned by team members. * Document findings and deliver clear technical results. * Write technical papers and present projects if desired. * Attend industry conferences to learn about new technologies and develop projects. * Respond to requests for proposals by developing a scope of work, schedule, budget, etc. * Participate in business development with existing projects and customers to build and maintain relationships. * Generous paid time off (vacation, sick days, company holidays, personal days) * Multiple Medical and Dental benefit plans to choose from, Vision benefits * Spending accounts - FSA, Dependent Care, Commuter Benefits, company-seeded HSA * Employer-paid, therapist-led, virtual care services through Talkspace * 401(k) with company match * Company provided life insurance, short-term, and long-term disability benefits * Education reimbursement program * Flexible work schedule with hybrid opportunities * Charitable Matched Giving and Volunteer Rewards through our Impact Program * Volunteer time off (VTO) paid by the company * Career advancement opportunities Benefits vary based on position, tenure, location, and employee election DNV is a proud equal-opportunity employer committed to building an inclusive and diverse workforce. All employment is decided on the basis of qualifications, merit, or business need, without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. DNV is committed to ensuring equal employment opportunity, including providing reasonable accommodations to individuals with disabilities. US applicants with a physical or mental disability who require reasonable accommodation for any part of the application or hiring process may contact the North America Recruitment Department (**********************************). Information received relating to accommodation will be addressed confidentially. For more information ********************************************************************** What is Required * B.S. degree or higher in Engineering. * Ability to understand and address client needs. * Proficiency in Microsoft Excel, Word, PowerPoint. * Strong technical writing, problem-solving, critical thinking, and quick learning abilities. * Detail-oriented, self-motivated, hardworking, and professional mindset. * Capable of working both independently and as part of a team. * Manage fast-paced, high-demand environments. * Willingness to travel domestically and internationally. * Strong written and verbal English communication skills. * We conduct pre-employment drug and background screening. What is Preferred * B.S. degree or higher in Material Science & Engineering, Mechanical Engineering, or Chemical Engineering. * Experience working with clients/customers. * Immigration-related employment benefits, for example visa sponsorship, are not available for this position

Description Altamira Technologies has a long and successful history providing innovative solutions throughout the U.S. National Security community. Headquartered in McLean, Virginia, Altamira serves the defense, intelligence and homeland security communities by focusing on creating innovative solutions leveraging common standards in architecture, data and security. Altamira believes that our people and the culture of our company differentiate us from other companies.We focus on recruiting talented, self-motivated employees that strive to find a way to get things done. Join our team of experts as we engineer national security!Altamira is searching for multiple Missile Model Engineers in the Dayton, Ohio area, to support one of customers.Job Responsibilities: Provides all-source metric data fusion using multiple data sources (SIGINT, GEOINT, MASINT, etc.) Provide engineering and scientific support on our prime contract to produce and deliver results related to missile trajectories and models Support Ops analysts, R&D Teams and Government Flight leadership in developing trajectory model products Support research, discovery, development, and prototyping of data extraction, data processing, and/or analysis techniques Communicates and collaborates with Government leadership and other analysts on a daily basis to ensure any/all processing and exploitation is completed in a prioritized and timely fashion Qualifications: Preferred bachelor's degree in Aerospace Engineering, Physics, Math, or other related technical field Must be a U.S. Citizen Active TS/SCI Clearance Preferred 3+ years of analysis fusion from multiple data sources This position will require U.S. citizenship and an active DoD Top Secret security clearance with access to Sensitive Compartment Information (TS/SCI). Due to the nature of this work, we are unable to consider applicants who do not hold this level of clearance.Altamira is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status. Altamira is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We focus on recruiting talented, self-motivated employees that find a way to get things done. Join our team of experts as we engineer national security!

OTC Industrial Technologies is looking for an enthusiastic Mechanical Engineer Intern to join our summer of 2025 internship program. This internship will support our Engineering Team & Quality in projects such as: * Provide Technical and administrative support to the Engineering Group * Read mechanical & Electrical Blueprints and be able to troubleshoot equipment, in both mechanical & electrical systems * Review/create bill of materials & scope of work documentation * Review product specifications and create internal equipment standards * Ability to revise electrical schematics in AutoCAD & Solid Works CAD software * Assist in design, fabrication, and installation of compressor systems, fixtures, tooling, etc. * Ability to create detailed technical reports for internal and/or customer use * Assist in the development of Solidworks PDM database and Solidworks Toolbox * Assist in the development of organizational standards and documentation * Help to create an inteligent parts database in SolidWorks * Assist in the Quality audits of manufacturing and decommissioned modules. Competencies: * Familiarity with 2D and 3D CAD Systems such as AutoCAD, Inventor, and Solidworks * Strong Computer Skills, including proficiency in MS Office applications * Well Developed problem solving & communication * Excellent written and interpersonal skills * Comfortability in sharing thoughts, ideas, and questions How will this internship contribute to the development of his/her knowledge, skills & abilities? * Work in cross functional teams, i.e. electrical and application engineers to learn collaborative design across multiple disciplines. * Due to the expectation that many of the requested tasks will be learning experiences in the areas of automatic controls design, industrial automation, systems and project engineering. All work will be completed under the supervision of experienced team members who will provide appropriate instruction. * Degree Concentrations applicable to the Industrial Segment: Industrial Engineering, Electrical Engineering, Mechanical Engineering, Manufacturing related concentrations. Our Offer to You: * A quality internship experience with impactful assignments & projects * A brand name that is identified across the country as a leading industrial distributor * A competitive hourly wage for the summer (Late May to Early August) * Professional development & growth working for a technology company that provides expert solutions for a wide range industries. At OTC Industrial Technologies, we believe that our employees are our greatest strength. Through investment in our people and growth from within, we believe in providing you with a wide variety of opportunities to accelerate your career potential as you help us drive change to move our business forward. For over 60 years, employing and developing the best-in-class talent has been at the forefront of our success. By coupling our teams' hands-on experience with a wide range of products from top vendors, we provide customers with the best quality products and technical application expertise and services at the lowest possible costs. Working with OTC Industrial Technologies is perfect for purpose driven individuals who are motivated to be part of an exciting transformational company.

What makes SSOE a great place to work You don't have to be an employee long before you understand the SSOE difference. It goes back to our history of reinventing ourselves for new markets, serious rates of growth year after year, and being ahead of the curve in technology. Those are the achievements of a company that rewards talent and effort in ways that mean the most to the individual. When you work at SSOE, you work with the best and you're a part of something bigger than yourself. And providing the best possible workplace for our employees gives us a competitive advantage - helping us attract and retain top talent and drive better business results. We are currently seeking an Mechanical Co-op - Spring 2026 to join our team in Toledo, OH or Nashville, TN. This is a full-time Spring Co-op rotation onsite role requiring daily presence at our Toledo or Nashville office. Remote or hybrid work arrangements are not available for this position. AI and Innovation As part of our commitment to innovation, all team members will be trained on Microsoft Copilot and empowered to use it as a core tool in their everyday work. Responsibilities The following duties are typical of the position, but are not all encompassing. Each person is expected to help out in whatever duties are required to deliver a quality product on schedule and within budget in a team environment. Performs assigned tasks under close supervision of Department Manager or designee. Receives specific and detailed instruction. Learns and uses department standards, methods, and procedures respective to field of study. Meets various deadlines on daily duties or special projects as assigned by DM or designee. Occasional travel may be required. Valid driver's license required. May be waived for international assignments. Qualifications Current enrollment in a two or four year college degree program. Second or third academic year preferred. Demonstrated organizational skills. Salary range: $19-$23 per hour depending on year in school.

The Project Engineer is a critical component of the project team that works together to manage a construction project. Essential Duties and Key Responsibilities Coordinate material procurement and delivery Produce project schedules Review and determine suitability of shop drawings and submittals Quote/qualify subcontractor requests for change orders Track status of change orders Track status of Requests for Information Collect, verify, and distribute as-builts Maintain project close-out documents Assist with field supervision Blueprint reading Quantity take-offs Sub-contractor solicitations Correspondence Quality Control Subcontractor Coordination Other duties as assigned Summary F.H. Paschen has over 110 years of experience in the construction industry. You've driven on highways we paved, you've travelled through airports we modernized, you've commuted through rail stations we constructed, and your children learn in schools we built. But we are MORE than that. We offer MORE Versatility-as we work in any industry, offering any delivery method and service. We operate with MORE Tenacity-as we maneuver through tight schedules, spaces, and budgets. We provide MORE Ingenuity-by creating solutions to solve your greatest challenges. And we perform with MORE Pride-in focusing on safety and quality, and in offering more opportunities for our communities and diverse populations to build with us. We deliver far more than just on time and on budget-we deliver with MORE Paschen. Requirements Have knowledge of technology related to construction, such as Blue Beam, Revit, and Procore. Strong written and oral communication skills are required. Experience with computer applications for spreadsheets, word processing and scheduling is preferred. 4-year degree in Engineering, Construction, Architecture or Business is required. Prior internship experience is a plus. F.H. Paschen is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. If you require an accommodation in order to complete this application, please contact our office at ************** . Benefits Health insurance Dental insurance Vision insurance Paid time off 401K matching Flexible spending account Life insurance Referral program Professional development assistance

Location: Hamilton, OH Employment Type: Night Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Junior Engineer for our client. This role is responsible for administering, documenting, and training the Service Desk on secure backup and replication solutions while improving processes and operationalizing them across the organization. The position responds to and resolves client issues, provides customer interaction, and follows ITIL-based incident, problem, and change management procedures.What's a Typical Day Like? Administers, documents, and trains Service Desk on managing secure backup and replication solutions and their required components. Continually improves processes and procedures to operationalize them across the organization. Responds to and resolves client issues utilizing technology tools, procedures, and training through awareness of service offerings and Service Level Agreements (SLAs). Provides direct customer interaction as needed in support of customer operations. Understands Information Technology Infrastructure Library (ITIL), supports and follows predefined ITIL incident, problem, and change management processes in place for each client when working to resolve client's requests and outages. Provides technical leadership and acts as technical resource and escalation point for Service Desk, and mentors team members. Interact with co-workers to coordinate and disseminate information to complete job assignments whileattaining company service objectives. Provides and executes periodic environment reviews and client health checks, collects statistical information, monitors growth, and suggests enhancements of services or resiliency of environments to management and the customer. Train other staff in IT operations and technologies. Maintain IT asset inventory and CMDB. Sets course for repeatable processes and automation of recurring tasks. Tracks time utilization using company standard tooling. Support Security Incident Response protocols. Supports Vulnerability Remediation protocols. Remediates security vulnerabilities per process. Maintains a working knowledge of applicable Federal, State, and Local laws and regulations as well as policies and procedures of company to ensure adherence in a manner that reflects honest, ethical, and professional behaviors. Supports and conducts self in a manner consistent with customer service expectations. Performs other duties and responsibilities as assigned. What Are the Requirements of the Job? Minimum of four years industry related experience in Enterprise and Managed Service environments. 2 years' experience/understanding of Microsoft and Office 365 technologies, implementation, administration, and support. (Intune, Azure Active Directory, Exchange, ATP/ATA, and CAS) 3 years' experience supporting, administrating and or troubleshooting Microsoft Windows Server platforms2 years' experience/understanding of Backup and Replication concepts 2 years' experience supporting virtualization/ hypervisor environments. 2 years' experience in basic network technologies including TCP/IP, WINS, DHCP and DNS (Domain Name Service) Experienced supporting enterprise/cloud storage technologies including SAN, NAS (Network Attached Storage), iSCSI, and FC/FCoE Experience in Certificate Management Experience/understanding of ticket management software. Comfortable troubleshooting LAN, WAN, server, and other infrastructure issues and escalating as needed. Meets deadlines by prioritizing work requests based on sense of urgency. Follows through with tasks, projects, and troubleshooting with minimal supervision. Initiative-taker with excellent organizational, administrative, and interpersonal skills. Superb customer service skills. Local travel and overnight travel and client offices may be necessary (typically less than 10%). Ensure all necessary operational processes and procedures are conducted with diligence, expediency, and on-time delivery. Stays on leading edge of technology by learning new techniques and methods through continual education. Be ethical, fair, and of high integrity. Excellent punctuality and attendance. Able to lift devices weighing over 50 lbs. Enterprise Backup & Replication Experience with Virtualization Experience with Microsoft M365 Preferred 2-year degree or technical training (technical school or military). ITIL v3 Foundations certification desired. Experience with Major Incident support. Server+, Network+, A+ desired Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 750+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem-solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward- advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors The successful Project Engineer will have the opportunity to lead a multi-disciplinary team of engineers and technicians on municipal projects. Project engineering responsibilities include infrastructure design, preparation of construction documents, cost estimating, and thorough project QA/QC. Project Management duties include developing and managing the project scope, schedule, and budget; and delivering an overall quality project to our clients. Collaboration with a team of engineers and mentoring of entry-level staff will be essential. Your Responsibilities: Managing multi-disciplinary engineering projects and engineers. Developing and maintaining project scope, schedule, and budget. Project Management with municipal projects involving infrastructure design, site/civil design, roadway rehabilitation/reconstruction, and pedestrian/bicycle facilities. Understanding of State, Local, and Federal funding programs. Understanding ODOT design criteria, standards, and specifications. Participation in local professional society functions. Client relationship management. Business development. Requirements: Education, Experience & Licensure: Ohio Prof. Engineering License. 4-10 years' Municipal Project Engineering. Experience with AutoCAD/Civil 3D, and/or MicroStation ORD. Technical Skills: The desire and ability to build strong client relationships. Ability to train entry-level engineers and interns. Excellent communication and organizational skills and enjoy working in a team environment. Benefits Summary At OHM Advisors, our people are our greatest asset. We're committed to providing a supportive and rewarding workplace that fosters personal and professional growth. That's why we offer a competitive benefits package designed to meet your unique needs. Benefits: BCBSM Medical, Dental and Vision Company Profit Sharing Flexible Spending & Health Savings Accounts 401(k) retirement savings plan with employer matching contribution Paid professional association membership Tuition & Certification Expense reimbursement Volunteer Service Leave 100% Employer-Paid Life Insurance Short & Long-Term Disability Options Career Advancement & Enrichment Programs: Voluntary Wellness Program OHM Grad School OHM University You can read more about each of these programs on our website. OHM Advisors is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-CC1

Job Description 2026 Summer Internship Opportunity Internship opportunities exist at ACNR, Inc. subsidiary locations in various locations across the country. This posting provides the means to apply for any location. The intern position will be working with rotation shift maintenance and electrical foremen. The intern will participate in the act of addressing actual mechanical and electrical issues that exist in the industrial mining environment. The intern must be enrolled in a 2 or 4 year Electrical or Mechanical Engineering or Engineering Technology program. Similar fields will be considered. The intern will be exposed to mechanical, electrical, hydraulic, and fabrication based projects and issues. The intern should expect 10 hour rotating shifts in an industrial environment. Requirements: Candidate Requirements Include but are not limited to: Mining experiences is preferred but not required. Must be capable of lifting 50 lbs. on a regular basis and the capability of moving 100+ lbs., is necessary. Must meet all federal, state and local requirements, and successfully complete all training and certification requirements which may be required. Must provide his or her own daily transportation. Must be capable of performing essential functions of the position and meet all pre-employment associated requirements. Benefits: Each subsidiary company of ACNR, Inc. is an Equal Opportunity Employer.

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Hi, I am Monika Vurla (Technical Recruiter) always look for potential candidates like you. Below is the requirement with our direct client. Let me know if you interested and available for the job. Role: Production Associate Location: Troy, OH 45373, USA Duration is approx.: Long term CTH Shift Availability: 2nd shift : 3:00pm - 11:00pm 3rd shift: 11:00pm - 7:00am Pay rate: $11/hr ( for normal working 8 hrs. ) (overtime $16.50/hr) : • Assembly OR Break Parts • Following general safety guide lines • Bend stoop and kneel • Keep pace of production line • Wear appropriate PPE • Assembles smaller components onto larger components. • Inspects parts for quality. • Detects and reports defective materials to supervisor. • Conducts machine operation and safety checks on prescribed intervals. • Performs general clean-up and organisation of work area (SCORE- Safety, Cleanliness, Organisation, Responsiveness, and Efficiency). • Other duties as assigned to maintain production. Role: ASSEMBLER/ PRESS OPERATOR-STAMPING/ WARE HOUSE OPERATOR/ MATERIAL HANDLER/ MACHINE OPERATOR Location: Lebanon, OH 45036, USA Duration is approx.: Long Term Pay rate: $12/hr Shift Availability: 12hrs Shift 5AM-5PM Note: You need to work 5 days a week with overtime work Job Description: · Assembly OR Break Parts · Standing Max 90% Shift · Following general safety guide lines · Bend stoop and kneel · Keep pace of production line · Wear appropriate PPE · Assembles smaller components onto larger components. · Inspects parts for quality. · Detects and reports defective materials to supervisor. · Conducts machine operation and safety checks on prescribed intervals. · Performs general clean-up and organization of work area (SCORE- Safety, Cleanliness, Organization, Responsiveness, and Efficiency). · Other duties as assigned to maintain production. If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest . Please revert with a mail. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Monika

Applied Research Solutions is seeking a skilled and forward-thinking Junior Platform Engineer to join our team. This role is pivotal in designing, developing, and maintaining integrations between cloud-based applications and on-premise systems. You'll work closely with cross-functional teams to ensure seamless data flow, system interoperability, and scalable architecture across our enterprise platforms Why Work with us? Applied Research Solutions (ARS) is respected as a world-class provider of technically integrated solutions as we deliver premier talent and technology across our focused markets for unparalleled, continuous mission support. Awarded a Best Places to Work nominee since 2020, ARS recognizes that without our career- driven, loyal professionals, we would not be able to deliver state-of-the-art results for our mission partners. We firmly believe that prioritizing our employees is of the upmost importance. We provide a culture where our employees are challenged to meet their career goals and aspirations, while still obtaining a work/life balance. ARS employees are motivated through our industry competitive benefits package, our awards and recognition program, and personalized attention from ARS Senior Managers. Responsibilities include: Administer and maintain cloud-hosted application instances Develop integration workflows between SaaS solutions, VM-based applications, and third-party APIs. Monitor application health, performance, and usage metrics; proactively identify and resolve issues. Manage configuration, patching, upgrades, and security compliance across cloud applications. Collaborate with cross-functional teams to support business process automation and data synchronization. Develop and maintain documentation for application configurations, integration flows, and operational procedures. Evaluate new tools and technologies to enhance operational efficiency and integration reliability. Other duties as assigned Qualifications/ Technical Experience Requirements: 2-3 years of experience in cloud application administration and integration engineering. Bachelor's degree in Computer Science, Information Systems, or related field. Must be a US citizen. Must have or be willing to attain a TS/SCI Clearance. Security+ required, but can be worked after hiring Significant demonstrated experience deploying applications to mainstream cloud ecosystems (Azure, Amazon Web Services) and associated technology stacks, including container technologies (Docker, Kubernetes) Expertise in managing SaaS platforms and cloud-native applications. Excellent troubleshooting and analytical skills Excellent communication and collaboration skills Preferred Qualifications Must be a US citizen Master's degree in Computer Science, Information Systems, or related field. MS Azure cloud certifications (e.g., Azure Administrator Associate) Experience with containerization and orchestration (Docker, Kubernetes). Knowledge of hybrid cloud, multi-cloud, and edge computing integration strategies. Familiarity with monitoring and observability tools (CloudWatch, Azure Monitor, Prometheus, etc.). Background in enterprise application integration (EAI) or data integration platforms. Experience with identity and access management (IAM), SSO, and role-based access controls Knowledge of data governance, compliance frameworks. Background in scripting or automation. All positions at Applied Research Solutions are subject to background investigations. Employment is contingent upon successful completion of a background investigation including criminal history and identity check. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-741.5(a). This regulation prohibits discrimination against qualified individuals on the basis of disability, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered contractors and subcontractors to employ and advance in employment qualified protected veterans.

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Hi,I am Monika Vurla (Technical Recruiter) always look for potential candidates like you.Below is the requirement with our direct client. Let me know if you interested and available for the job. Role: Production Associate Location: Troy, OH 45373, USA Duration is approx.: Long term CTH Shift Availability: 2nd shift : 3:00pm - 11:00pm 3rd shift: 11:00pm - 7:00am Pay rate: $11/hr ( for normal working 8 hrs. ) (overtime $16.50/hr) : • Assembly OR Break Parts • Following general safety guide lines • Bend stoop and kneel• Keep pace of production line • Wear appropriate PPE • Assembles smaller components onto larger components. • Inspects parts for quality. • Detects and reports defective materials to supervisor. • Conducts machine operation and safety checks on prescribed intervals. • Performs general clean-up and organisation of work area (SCORE- Safety, Cleanliness, Organisation, Responsiveness, and Efficiency). • Other duties as assigned to maintain production. Role: ASSEMBLER/ PRESS OPERATOR-STAMPING/ WARE HOUSE OPERATOR/ MATERIAL HANDLER/ MACHINE OPERATOR Location: Lebanon, OH 45036, USA Duration is approx.: Long Term Pay rate: $12/hr Shift Availability: 12hrs Shift 5AM-5PM Note: You need to work 5 days a week with overtime work Job Description: · Assembly OR Break Parts · Standing Max 90% Shift · Following general safety guide lines · Bend stoop and kneel · Keep pace of production line · Wear appropriate PPE · Assembles smaller components onto larger components. · Inspects parts for quality. · Detects and reports defective materials to supervisor. · Conducts machine operation and safety checks on prescribed intervals. · Performs general clean-up and organization of work area (SCORE- Safety, Cleanliness, Organization, Responsiveness, and Efficiency). · Other duties as assigned to maintain production. If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest . Please revert with a mail. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Monika

Job Description The Project Engineer is responsible for: Track and drive tooling projects to ensure tooling is built on time and to 20/20 Custom Molded Plastics standards. This position will work closely with the Corporate Engineering Department in Holiday City, Ohio. Drive and coordinate projects as assigned. Develop and install secondary operations as required. Produce tooling and machinery layouts as required. Aid in quoting process. Develop, manage, and install jigs, fixtures and secondary equipment. Project design Experience with 3D Modeling and project management helpful Solidworks and experience working in the plastics industry. General Engineering functions. Other duties as assigned. Education and training Minimum of a two-year degree. Technical Requirements This candidate should have a strong working knowledge of Microsoft Office Applications, Solidworks, 3D Modeling and current inventory systems and programs.

We are seeking a Junior Cyber Security Engineer to support a Air Force Research Laboratory (AFRL) contract. is located in Dayton, OH at Wright Patterson AFB (WPAFB). Duties will include: Manage efforts to conduct and maintain Continuous Monitoring (CM) from various organizations Provide a discovery summaries and technical risk assessments (with mitigation options) for successful completion/maintenance of the CM process and auditing activities. Support application administration, maintenance, monitoring and auditing activities to Continuous Monitoring. Maintaining ongoing awareness of information security, vulnerabilities, and threats to support organizational risk management decisions. Evaluate controls and countermeasures, verifies security posture and maintains that posture throughout the network or system lifecycle. Compile alerts and reports to show results of auditing and monitoring to keep exposure to threats low and to be alerted of potential events that may require investigation. Work with System Information owners, Program Manager, System Administrator, ISSM, or ISSO to conduct CM and auditing activities and report discovered events and incidents Identify patterns and signs of atypical events occurring across or inside a network or system that could be signs of a threat, attack, exploit, or Insider threat Review technical accuracy of organizations documentation and assess/advise on levels of risk and thoroughness of documentation. Qualifications Required (Skills) BS Degree with 3 years of Air Force Cyber Analyst experience or 7 years experience in lieu of a degree Working Knowledge of eMASS, ACAS, and various System Event Information Management (SIEM) tools such as Splunk, Elasticsearch, or Solarwinds Active CompTIA Security+ Certification ABILITY TO OBTAIN AND MAINTAIN A DOD SECRET SECURITY CLEARANCE FOR WHICH, YOU MUST BE A U.S. CITIZEN Qualifications Desired AWS or Google Cloud experience Ability To Obtain and maintain a DOD TS/SCI Clearance Active Secret clearance or higher Working Place: Dayton, Ohio, United States Company : ENSCO