Meggitt PLC jobs in Tucson, AZ - 2727 jobs

ESSENTIAL DUTIES AND RESPONSIBILITIES • Lead with a safety mindset that ensures that every US Foods associate remains injury free, always. Champion safety procedures, processes and training to create and maintain a safety-first culture in the warehouse. • Oversee and develop warehouse associates through one-on-one coaching, training on policy and procedures, assisting in problem resolution when required, and leading by example. Discuss associate performance with Sr. Warehouse Managers and create plans to address gaps. • Create a cohesive organization by keeping lines of communication open and directing workforce to ensure efficient workflow. • Direct and supervise the work and productivity of associates within the warehouse department. Drive associate engagement and retention, and create a culture that embodies US Foods values. • Participate in building high-performing teams by interviewing and hiring warehouse personnel, in conjunction with Sr. Warehouse Managers. Review performance, coach on productivity and safety targets, and deliver disciplinary action. • Lead and direct associates to achieve accurate orders that are then staged and loaded on the trucks. Oversee the preparation of the warehouse for shipping or receiving on the next shift. • Monitor operational information, such as "mis-picks" and productivity reports, to ensure the entire shift meets rates and follows preferred methods. Take action through coaching and counseling to correct behaviors. • On day shift, designate dock locations for inbound carriers. Ensure product is stocked in appropriate location in accordance with food safety and FIFO processes & procedures. Monitor replenishment activity to ensure stock is available for the shipping shift and to minimize the potential for “shorts”. Oversee will call. • Maintain physical condition and safety of warehouse and equipment, including preparing work orders for repairs and requisitions for equipment. • Work with operations management team to identify sources of inventory shrink and assist in development of an action plan. Analyze the current operations and make recommendations to improve on expense and cost control. • Regularly inspect facility for safety hazards and either resolve them or report them to the safety manager as appropriate. Maintain the physical condition of the warehouse and its equipment. • Ensure Master Sanitation Schedule (MSS) and FSQA requirements are followed. • Effectively schedule working shifts by leveraging appropriate planning tools (i.e., Microsoft Excel) • Other duties assigned by manager. SUPERVISION: • Direct: Union and/or non-union warehouse on-floor associates (Loaders, Selectors, Receivers, Forklift drivers, etc.) RELATIONSHIPS • Internal: Warehouse leaders and coworkers; Internal customers across departments (e.g., Sales) • External: N/A WORK ENVIRONMENT • The work takes place in normal warehouse environments as well as in cooler and freezer areas where temperatures may be as low as -5 degrees. MINIMUM QUALIFICATIONS Related Experience/Requirements: • Minimum of three years of experience in warehouse distribution required. • Minimum of one year of experience overseeing a workforce required. Knowledge/Skills/Abilities: • Broad knowledge of warehouse operations, methods and procedures. • Strong leadership, communication and people development skills. • Familiarity with inventory control, OSHA, HACCP and other regulatory requirements. • Ability to interpret financial and operational data. • Basic computer skills (i.e., Microsoft Office). Travel: •10% travel required, typically for mandatory meetings and/or training. Education/Training: • High school diploma or GED required; college degree preferred. PREFERRED QUALIFICATIONS Licenses/Certifications: • HACCP certification a plus. • PCQI certification a plus. PHYSICAL QUALIFICATIONS: Must be able to perform the following physical activities for described length of time: OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: OCCASIONALLY WALK: FREQUENTLY DRIVE VEHICLE 1: OCCASIONALLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): OCCASIONALLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): NEVER CARRY 1-10 lbs (Sedentary): CONTINUOUSLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): OCCASIONALLY 51-100 lbs (Heavy): NEVER Over 100 lbs (Very Heavy): NEVER PUSH/PULL 2: OCCASIONALLY CLIMB/BALANCE 3: OCCASIONALLY STOOP/SQUAT: OCCASIONALLY KNEEL: OCCASIONALLY BEND: OCCASIONALLY REACH ABOVE SHOULDER: OCCASIONALLY TWIST: OCCASIONALLY GRASP OBJECTS 4: OCCASIONALLY MANIPULATE OBJECTS 5: OCCASIONALLY MANUAL DEXTERITY 6: OCCASIONALLY 1 (Drive Vehicle: Forklift, pallet jack) 2 (Push/Pull: Pallet jack controls, doors, product, pallets) 3 (Climb/Balance: On/off pallet jack, stairs) 4 (Grasp Objects: Pens, telephone, computer mouse, paperwork, pallet jack controls, boxes) 5 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 6 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the time. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $16.00 per hour Growth opportunities abound - We promote from within Paid travel with overnight stays No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Interested in traveling within and outside of your home state, with overnight hotel stays Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Powell Service Division is looking for a highly skilled and motivated Senior Service Technician interested in joining one of the nation's leading providers of medium and low voltage switchgear. Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, corrective maintenance, and periodic supervision of small crews. The ideal candidate thinks critically, can work well independently, and is a problem solver. Senior service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified Service Technicians are provided safety and technical training with full office support. Once qualified, Technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, smart phone, and company expense card. Key Responsibilities Adhere to Powell's current safety and quality standards Complete all site documentation in in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing. Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service Manager Maintain flexible work hours, which will include over time and periodic weekend support Comply with Powell ‘s standard operating procedures, documentation processes, safety processes and protocols. Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner Able to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects. Switchgear and PCR installations DC / AC Switchgear Knowledge of Traction Power Systems Troubleshooting mechanical repair issues. Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing. Perform regular inspections of any issued vehicle or calibrated equipment/tools. Demonstrate ability to manage tasks, commitments, and deadlines as it pertains to assigned tasks, communications with customers, and internal customers Job Requirements The Senior Service Technician must possess a high school diploma, as well as three or more years' experience, as a shop and / or field electrical / technician. Senior Service Technicians must exhibit knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear. Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements. Demonstrate knowledge in the design and manufacture of bus and structural modification projects. Powell also requires that all Service Technicians undergo Factory Certified Technician training and maintain a passing grade. The Senior Service Technician must be experienced in the art of writing accurate and complete test reports, project summaries and has the ability to explain anomalies found on a given project. Knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory; contactor and circuit breaker schematics are a must. The Senior Service Technician must be able to perform of hi-pot testing and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection; acceptance testing of dielectric apparatus using over voltage testing; mechanical and electrical functional testing of circuit breakers and electrical switchgear. The Senior Service Technician will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel. Additional requirements include but are not limited to: Working knowledge with using the following test equipment: Hi potential, DLRO, Multi-meter, dial caliper. Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability. Must have verbal and written communication skills. Proficiency in problem solving is a preferred. Willing to attend in-house and out-side training. Willing to travel up 85% of the year. Demonstrate ability to read and interpret plan sets and one-line diagrams. Working Environment The Senior Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: Medium physical effort (lifting/moving up to 50 pounds) Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time. Work at heights greater than 10'. Work on ladders of all types. Work on scissor and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact ************. Application status inquiries will not be accepted in this manner.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

We are seeking experienced Sourcing Specialists with strong negotiation skills and a strategic business mindset to help drive key performance indicators (KPIs) and support our global supply base. This role is part of a high-performing team focused on executing sourcing strategies, maintaining supplier relationships, and ensuring compliance across our contract management systems. You will play a critical role in executing transactional initiatives, supporting our Annual Operating Plan (AOP), and collaborating with internal and external stakeholders worldwide to align with strategic sourcing goals. Key Responsibilities Commodity Management & Contract Execution • Lead commodity negotiations and supplier relationship management • Draft and manage NDAs, Unilateral Letters, Novations, Assignments, and Assumptions in collaboration with Legal and Contracts teams • Review contract amendments for accuracy and compliance prior to signature Compliance & Documentation • Prepare and submit comprehensive compliance packages, including: o Extended Terms Requests (ETRs) o Supplier scorecards and FAIRS data o SAP updates (MOQ, pricing, contract validation, VMI) o Fair and Reasonable Price Justifications (FRPJ) RFQ & Master Data Management • Manage RFQ packages, including drawing retrieval and distribution • Process vendor and material master changes • Validate part demand and historical receipts System & Process Support • Upload and maintain documents in contract management tools • Initiate Should Cost Estimates (SCE) and pull platform details • Resolve PO and supplier portal issues, submitting corrections as needed • Support and analyze CID and BAA content for strategic sourcing insights

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Hungry for a new career? Imagine...working for a company that knows that its people are the key to its success in the marketplace. A company in which achieving extraordinary results and having a stimulating work experience are part of the same process. We cultivate and embrace a diverse employee population. We recognize that people with diverse backgrounds, experiences and perspectives fuel our growth and enrich our global culture. We are looking for an individual who enjoys working in a fast-paced, team-oriented environment, likes to be challenged, and values the opportunity to make a difference. The Director of Environmental Health & Safety develops and drives the overall safety strategy for the organization. Provides leadership and oversight of the strategic vision and leads key initiatives for SK Food Group to ensure a world class safety culture. This role can be based out of one of our manufacturing facilities in Phoenix, Arizona, Columbus, OH, Reno, NV, or Cleveland, TN. ESSENTIAL DUTIES AND RESPONSIBILITIES Standardize and continue improving safety systems, policies, training, campaigns and programs to reduce risk and ensure compliance with federal, state/provincial and local laws. Develop strategy and execute various EHS processes to include environmental compliance, occupational health and safety, workers' compensation, transportation safety, contractor management, and business continuity. Design and execute injury prevention programs and initiatives to motivate and influence the creation of a world class proactive safety culture and minimize injury risk. Lead and develop a high performing team to ensure the execution of the network wide EHS strategy and goals. Build a high performing team to ensure the execution of SK Food Group's vision and strategy. Partner and collaborate with all functional leaders to influence and manage EHS resources, projects, and business decisions. Create a network of internal and external alliances to develop and implement EHS policies, programs, procedures, standards, training, and processes. Analyze and identify trends that increase injury and accident frequency/severity; develop and direct the implementation of training programs using the appropriate media. Support environmental compliance and claims programs (workers compensation, general liability, motor vehicle, property damage). Other duties as assigned. QUALIFICATIONS Bachelor's Degree in Occupational Safety and Health, Risk Management, or closely related field, and at least seven years of related experience and/or training required; or equivalent combination of education and experience. Master's Degree is preferred. Experience in a safety leadership role in a manufacturing or related industry environment is required. Certified Safety Professional (CSP) is required. Associate in Risk Management (ARM) or other professionally recognized certifications in the safety and/or risk management related field preferred. Ability to drive a strong EHS philosophy and implement programs designed to effectively change behavior and prevent injury using data driven methods. Excellent ability to develop and present business plans and strategies to influence company decision makers. Strong project management skills required to ensure EHS plans are executed at all levels on the appropriate timelines. Solid organizational and prioritization skills to include proven attention to detail. Experience coaching and motivating cross-functional and diverse teams. Experience successfully leading others and influencing change. Ability to analyze and independently resolve a variety of difficult situations and problems using timely decision making. Excellent interpersonal skills, ability to interact effectively with all levels of senior management, supervision and production associates. Ability to understand, react effectively and motivate others to adapt to a changing organization environment. This position will be required to travel estimated at 30-40%. BENEFITS: SK Food Group provides competitive salaries and a wide variety of benefits including programs that provide for your health and welfare, help you prepare for retirement and truly enable you to balance your work and family life. Robust Health & Welfare Benefits Package to include Medical, Dental, Vision for associate and family Associate Bonus Programs Family & Friends Referral Bonuses DailyPay - Access Earned Pay Sooner 401k Retirement Plan with company match Paid Time Off and Paid Holidays Paid Parental Leave Health & Dependent Care Flex Spending Accounts Dependent scholarship opportunities Educational Tuition Assistance Program Established in 1943, the SK Food Group is a leader in the food manufacturing and wholesale food sales industry. We produce a complete line of products for many different market segments including retail, convenience stores, vending and the transportation industry. In addition, we pride ourselves on the sub-contract manufacturing and private labeling capabilities our company offers to customers throughout the United States. Please visit ************************** for more information.

Now Hiring: Systems Software Engineer II 📍 Phoenix , Arizona | 💰 $108,000 - $135,000 per year 🏢 About the Role We're looking for an experienced Systems Software Engineer II to join Sunbelt Controls, a leading provider of Building Automation System (BAS) solutions across the Western U.S. In this role, you'll develop and program databases, create custom graphics, and integrate control systems for smart buildings. You'll also support project startups, commissioning, and troubleshooting - working closely with project managers and engineers to deliver high-quality, energy-efficient building automation solutions. If you have a passion for technology, problem-solving, and helping create intelligent building systems, this opportunity is for you. ⚙️ What You'll Do Design and program BAS control system databases and graphics for assigned projects. Lead the startup, commissioning, and troubleshooting of control systems. Work with networked systems and diagnose LAN/WAN connectivity issues. Perform pre-functional and functional system testing, including LEED and Title 24 requirements. Manage project documentation, including as-builts and commissioning records. Coordinate with project teams, subcontractors, and clients for smooth execution. Mentor and support junior Systems Software Engineers. 🧠 What We're Looking For 2-5 years of experience in Building Automation Systems or a related field. Associate's degree in a technical field (Bachelor's in Mechanical or Electrical Engineering preferred). Proficiency in MS Office, Windows, and basic TCP/IP networking. Strong organizational skills and the ability to manage multiple priorities. Excellent communication and customer-service skills. Valid Arizona driver's license. 💎 Why You'll Love Working With Us At Sunbelt Controls, we don't just build smart buildings - we build smart careers. As a 100% employee-owned company (ESOP), we offer a supportive, growth-oriented environment where innovation and teamwork thrive. What we offer: Competitive salary: $108K - $135K, based on experience Employee-owned company culture with a family-oriented feel Comprehensive health, dental, and vision coverage Paid time off, holidays, and 401(k)/retirement plan Professional growth, mentorship, and ongoing learning opportunities Veteran-friendly employer & Equal Opportunity workplace 🌍 About Sunbelt Controls Sunbelt Controls is a premier BAS solutions provider serving clients across multiple industries, including data centers, healthcare, education, biotech, and commercial real estate. We specialize in smart building technology, system retrofits, analytics, and energy efficiency - helping clients reduce operational costs and achieve sustainable performance. 👉 Apply today to join a team that's shaping the future of intelligent buildings. #Sunbelt #BuildingAutomation #SystemsEngineer #HVACControls #BASCareers

Hungry for a new career? Imagine... working for a company that knows that its people are the key to its success in the marketplace. A company in which achieving extraordinary results and having a stimulating work experience are part of the same process. We cultivate and embrace a diverse employee population. We recognize that people with diverse backgrounds, experiences and perspectives fuel our growth and enrich our global culture. We are looking for an individual who enjoys working in a fast-paced, team-oriented environment, likes to be challenged, and values the opportunity to make a difference. Supervises and leads a team of Maintenance Systems Technicians to ensure the facility and all equipment, both production and building related, within the plant is operational, maintained and functioning correctly. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Supervise and direct technicians in performing their job duties. Enforce, develop, and maintain safe working practices for all technicians. Develop and train technicians in their respective work areas, including providing hands-on training on technical skills. Provide guidance and input on career development for technicians. Counsel technicians on job performance and implement or make recommendations on disciplinary actions as necessary. Conduct performance reviews and other periodic performance feedback. Make recommendations on decisions regarding hiring, firing, and compensating technicians. Troubleshoots electrical and mechanical problems. Build and manage projects to meet timelines. Maintain complete equipment maintenance records and PM schedules for all facilities. Manage team to ensure productivity and finished product quality. Design, measure, analyze, implement and control mechanical process improvements. Troubleshoot mechanical issues and adjust them quickly. Lead team in repairing downed equipment in a fast-paced, time critical environment, if necessary. Recommend equipment modifications to improve the process. Other duties as assigned. Regular and predictable attendance is an essential function of this position. SUPERVISORY RESPONSIBILITIES This position is primarily responsible for supervising assigned Maintenance Systems Technicians. QUALIFICATIONS High School Diploma or general education degree (GED); and ten years related experience and/or training; or equivalent combination of education and experience. Certification in industrial fabrication, machining, electrical troubleshooting or related focus is preferred. Must have direct experience leading and coaching associates. Read machine diagrams and parts breakdowns. Read and interrupt electrical drawings. Use of hand and machine tools. Able to use a volt meter. Able to work effectively in the following environment; cold, hot, wet, high areas. Able to obtain certification with material handling equipment. Above average mechanical abilities. BENEFITS SK Food Group provides competitive salaries and a wide variety of benefits including programs that provide for your health and welfare, help you prepare for retirement and truly enable you to balance your work and family life. Medical Insurance Associate Bonus Programs Family & Friends Referral Bonuses DailyPay - Access Earned Pay Sooner 401k Retirement Plan with company match Paid Time Off and Paid Holidays Paid Parental Leave Health & Dependent Care Flex Spending Accounts Dependent scholarship opportunities Educational Tuition Assistance Established in 1943, the SK Food Group is a leader in the food manufacturing and wholesale food sales industry. We produce a complete line of products for many different market segments including retail, convenience stores, vending and the transportation industry. In addition, we pride ourselves on the sub-contract manufacturing and private labeling capabilities our company offers to customers throughout the United States. Please visit ************************** for more information.

Outside Sales Professional Have you ever worked in an industry that you could walk into ANY business and make a sale? Every type of business uses signs and graphics in ways you haven't even noticed...yet. Look around. See the opportunity on every surface. Whether you're a seasoned professional or just getting started, potential abounds in the sign and graphics industry. An Outside Sales Professional position with FASTSIGNS gives you the opportunity to work with people across different industries and giving them solutions that make an impact in and around their workplace. You'll spend your days meeting with clients assessing needs and opportunities, prospecting for new business, networking, and managing customer relationships. You will be selling a unique, exciting product line that changes by the minute - completely based on customer needs and desires. The challenge? Learning all there is to offer. We have a proven, successful training program to get you the basics, but you will learn every day of your career with FASTSIGNS...because we rarely do the same thing twice. POSITION DESCRIPTION This role is responsible for sales activities from lead generation through the project management process. Develop and implement agreed upon Sales and Marketing Plan which will meet both personal and business goals of expanding customer base in the marketing area. Work with the center's management and support teams for the achievement of customer satisfaction and revenue generation, in line with company vision and values. RESPONSIBILITIES * Develop annual sales plan with Franchisee or Center Manager, detailing activities to follow during the fiscal year, which will focus the position on meeting or exceeding sales quota. * Demonstrate the ability to carry on a business conversation with business owners and decision makers. * Consultatively sell and make recommendations to prospects and clients using various products and Brand Standards. * Identify sales prospects and contact these using a "drill down" and "share of wallet" concept. * Develop and maintain a database of qualified leads through referrals, telephone canvassing, face to face cold calling on business owners, direct mail, email, and networking. * Follow up on new leads and referrals resulting from telephone, marketing and field activity. * Maintain accurate records of all sales and prospecting activities including sales calls, presentations, closed sales, and follow-up activities within their assigned territory, including the use of a Contact Management program to maintain accurate records to maximize territory potential. * Develop a complete understanding of pricing and proposal models * Complete all paperwork and follow established center procedures from initiation through completion of a project (i.e., Work Order, credit approvals, POS entry, pre-payment collection, artwork approval, delinquent account collection, reporting). * Prepare presentations, estimates and sales contracts. * Establish and maintain estimate follow-up procedures. * Prepare status reports, including activity, closings, follow-up, and adherence to goals for weekly sales meetings. * Assist in the implementation of company marketing plans as needed. * Carry out market research; i.e. competitive shops and customer surveys * Identify and resolve customer satisfaction issues. * Establish and maintain effective team relationships with all support departments. * Adhere to all company policies, procedures and business ethics codes. * Participate in and practice the brand mentality of "Everybody Sells". Constantly be looking for sales opportunities for the center. * Serve as a backup for answering the phone if the Franchisee, manager and sales/service employees are busy assisting other customers. * Assist at the front counter as needed. * Understand the sales process enough to consult with customers to determine project needs and solutions. ADDITIONAL RESPONSIBILITIES * Participate in networking and marketing events such as seminars, referral groups, trade shows, and telemarketing programs. * Assist in collection of account receivables. * Coordinate shipping schedules and delivery of merchandise and services. * Conduct and/or supervise minor installations (i.e., RTA). * Coordinate various tasks & scheduling activities to ensure quality project management. WORKING CONDITIONS * Working conditions are normal for an office and a light manufacturing environment. Report to Franchisee or center manager. * Work may require occasional overnight travel, weekend and/or evenings. EEO Statement Bartz Enterprises LLC, DBA FASTSIGNS of East Tucson, provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Bartz Enterprises LLC, DBA FASTSIGNS of East Tucson complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Bartz Enterprises LLC, DBA FASTSIGNS of East Tucson expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of FASTSIGNS International Inc.'s employees to perform their job duties may result in discipline up to and including discharge. Compensation; Salary + Commission, sick pay, holiday pay. Salary based off of experience, commission based on production. Compensation: $36,000.00 per year

Embark on an extraordinary journey with us at Innovative Skincare, home of the renowned iS CLINICAL cosmeceutical brand. We are not just about creating groundbreaking skincare products; we are about creating chemistry that extends beyond the lab - a dynamic synergy between our products and our people. At Innovative Skincare, we believe in a unique formula: the perfect blend of professional expertise and cultural harmony. This philosophy fuels our brand's continuous growth and empowers each member of our team. We are more than a company; we are a community bound by passion, dedication, and a deep love for what we do, crafting an atmosphere that is as vibrant and energizing as our products. Who we are: Discover a world where skincare innovation meets scientific excellence at Innovative Skincare, a globally acclaimed leader in high-performance cosmeceuticals. Our journey is rooted in the relentless pursuit of creating skincare products that are not only effective but transformative. At the heart of our brand is the iS CLINICAL line, renowned for its fusion of nature's finest ingredients with cutting-edge science. We are driven by a deep understanding of skin biology and a passion for unlocking the secrets of skin health and rejuvenation. Our ethos is built on the pillars of innovation, integrity, and excellence. Our team members at Innovative Skincare are part of a company that is shaping the future of skincare, where your work contributes to the well-being and confidence of people globally. Join us and be a part of this exciting alchemy where your talent meets our vision, creating a world of pure chemistry! About the role: The QC Sampler is responsible for collecting raw material, in-process, and finished product samples for laboratory testing. This role ensures samples are collected accurately, labeled correctly, and documented according to SOPs, GMP, and safety standards. RESPONSIBILITIES: Collect samples of raw materials, in-process batches, and finished products following SOPs. Label and document all samples accurately for traceability. Deliver samples to the QC laboratory in a timely manner. Ensure sampling tools and containers are clean and properly maintained. Follow GMP, SOP, and safety rules when handling materials. Maintain accurate logs and records of all sampling activities. Communicate with QC, Warehouse, and Production teams regarding sampling needs. Report any deviations, damaged materials, or unusual observations. Keep sampling areas clean, safe, and organized. REQUIREMENTS: High school diploma or GED required. 1+ years of experience in manufacturing, quality, or warehouse preferred. Strong attention to detail and ability to follow written instructions. Good organizational and documentation skills. Must be able to lift up to 60 lbs and move up to 500 lbs with equipment. Comfortable working in production and warehouse environments. Our company is dedicated to providing equal employment opportunities and embraces diversity and inclusion in our workplace. All eligible candidates will be considered for employment without bias towards their race, ethnicity, religion, gender, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, or veteran status.

Purpose The Sub-Regional Safety Representative will provide risk management and safety programs that are unparalleled in the industry and increase the safety footprint to enhance our award winning safety culture. Duties and Responsibilities Provides all levels of management with assistance and technical advice needed for proper administration of the company's Safety Program Prevents accidents by investigating accidents; identifying causes of accidents and hazards; developing preventive measures and practices; conferring with insurance carriers; managing safety committee; preparing and recommending policies and procedures Maintains safe facilities by providing information relevant to the design and construction of facilities, and the installation of equipment; conducting inspections; recommending improvements. Develops safety education and training programs throughout the construction, general industry and DOT spectrums and coordinates the implementation of the programs in the field. Prevents OSHA citations by studying and interpreting regulations and standards; conducting inspections; identifying problems; developing solutions; accompanying and working with inspectors. Provides safety information by collecting, analyzing, and summarizing data and trends; publishing reports; writing newspaper articles and special bulletins; maintaining OSHA records; submits OSHA reports. Conducts Jobsite Compliance Audits per company policies and procedures. Participates in daily Risk Evaluation Meetings used to identify high risk work activities and hazard analysis/mitigation. Conducts pre-employment, Post-accident, Random (Non-DOT and DOT), Reason Cause, Return-To-Duty and Follow Up drug testing. Manages DOT driver safety programs. Plans and executes safety plans for Industrial projects Ensures environmental compliance at all facilities within the area of responsibility. Performs other duties as assigned or required. Requirements Education: High School diploma or GED Completion of OSHSA 10hr and 30hr course preferred Experience: 3+ year of work-related skill, knowledge, or experience in the EH&S field Skills/Knowledge: Advanced ability to analyze information Advanced knowledge of Safety Management Advanced oral and written communication and presentation skills Language Skills: Must be able to read and comprehend complex instructions, short correspondence and memos and the ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization Physical Demands: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, use hands to finger; handle or feel; and kneel; crouch; and talk; or hear; push and/or pull; reach; bend and/or stoop. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision and depth perception. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts. Maxim is an equal opportunity employer and does not discriminate against employees or applicants for employment based on their race, color, religion, creed, sex, national origin or ancestry, age, sexual orientation, disability, genetic information or veteran status, as those terms are defined under applicable laws, or any other characteristic protected by law.

Carlisle Weatherproofing Technologies (CWT) is a leading building envelope solution supplier that effectively drives energy efficiency and sustainability in commercial and residential applications. We are seeking a Maintenance Manager at our Kingman, AZ facility. Job Summary The Maintenance Manager is responsible for assuring that the facility and production equipment are properly maintained and designed to safely perform specified tasks in a cost-effective manner. Scope of the job hours of operations 7am to 5pm Monday through Friday with "On Call" 24 hours availability, with possibility of overtime, variable shifts. Travel for training or other plant observations when necessary. Duties and Responsibilities: * Identification, justification, and execution of capital projects * Monitoring of machine functioning to include repair/downtime history and planning/execution of necessary/cost effective preventative maintenance activities. * Maintenance of stock room inventory that adequately reflects the parts needs of the operation in a cost-effective manner. * Direct supervision of professional engineers, technicians, department supervision and clerical personnel; indirect supervision of hourly maintenance craftsmen to include skilled electrical and millwright personnel, as well as maintenance contractors onsite. * Maintenance of physical facility to serve its intended use in a safe/cost effective condition Assure that the equipment meets necessary safety characteristics as specified by various regulatory bodies (e.g., Cal/OSHA, National Fire Protection Association, industrial insurance carrier, ); monitoring of discharges (e.g., air, noise, sewer, etc.) to assure that proper permits are in force and emissions are maintained within prescribed limits. * Interface with other plant departments to identify, justify, and execute projects that improve safety, reduce manufacturing costs, improve production, enhance repair of equipment breakdowns and/or facility problems, development, justification, and adherence to annual operating expense budget. * Outside interface/support with various company groups (e.g., R & D, Central Engineering) to complete projects/activities targeted at improving productivity. * Responsible for developing departmental budget needs, justifying such and maintaining costs within budget. * Coordinates project activity, including equipment design/introduction, with project engineer and Central Supports plant SES (Safety Env & Security Supr) with waste management, pollution control and administrative requirements. Required Knowledge/Skills/Abilities: * Previous experience in the following maintenance areas strongly preferred: electrical, plumbing, carpentry, welding, and boiler. * Knowledge of measuring gauges such as tape measures and calipers * Prior experience operating a forklift and scissor lift * Basic computer skills (MS Office Suite including MS Word, MS Outlook, and MS Excel) * Experience with an ERP system such as SAP, Ladder Logic, strongly preferred. * Effective communication, both written and oral, and effective problem-solving * Prior experience reading blueprints, equipment manuals and schematics * Prior experience implementing and maintaining Preventive Maintenance and Work Order schedules required. * Ability to work under pressure to complete assigned tasks under stressful Education and Experience: Required: * Bachelor's degree- Natural Science (Physics), Engineering, Business Management, Finance, Marketing, or Accounting. * Five to Seven (5-7) years of progressively responsible experience in a manufacturing engineering and maintenance environment. * Two to Four (2-4) years' experience in maintenance leadership * Chemical industry background or similar industrial Working Conditions: * Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. * Exposure to hazardous mechanical, electrical and chemical substances/equipment. * Confined spaces Personal Protective Equipment (PPE) Used: * Eye and hearing protection is required at all times on the production * Safety toe shoes (steel/composite). * Flame-resistant rated Maintenance uniform * Other PPE as defined by management within the assigned role BENEFITS AND PERKS Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. Benefits offered: * Medical, Dental, and Vision insurance- DAY 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement

Who doesn't love doughnuts? TDP Bakery exists to bring fresh indulgent bakery products to places where people could normally never enjoy them. Fresh, never frozen, bakery is just better. Through our BakeFace™ brand private-label partnerships, we supply a broad portfolio of Honestly Fresh™ baked goods to retailers nationwide. Role Summary As a Project Liaison, you will play an integral part in connecting internal groups to help service our customers better. A typical day in this role could be utilizing analytical tools in Tableau to gain insights into our customer service teams and then interfacing directly with your TDP coworkers across the organization to solve internal challenges to better service our customers. This role will bring out your skills in communication, excel and Tableau through strong data analytics, reporting, and interdepartmental coordination. This position is ideal for an early-career professional with strong technical aptitude, attention to detail, and the desire to grow their skills in data-driven decision-making. Key Responsibilities Data visualization and analysis: Develop and maintain interactive Tableau dashboards and reports. Perform data analysis to identify trends, patterns, and insights, and create reports that communicate these findings. Optimize dashboards for performance and usability. Project management: Define project scope, goals, and deliverables. Create and maintain project plans and schedules, and track progress against milestones. Coordinate with internal teams and resources to ensure project success. Communicate project deadlines and deliverables to stakeholders. Create and maintain product tracking details across all 5 markets. (VIN, UPC, Cost, Retail, etc.) Data management and quality: Collect, refine, and prepare data from various sources for analysis. Manage and utilize the Tableau platform Create and maintain documentation and provide training to end-users. Required Qualifications Excellent communication, collaboration, and interpersonal skills. Ability to work independently and as part of a team Strong analytical and problem-solving skills. High attention to detail and organizational skills. Adaptability to fast-paced, evolving business environments. Strong presentation skills to communicate complex data clearly. Strong proficiency in Microsoft Excel (data analysis, pivot tables, formulas, report creation). Tableau: Robust knowledge of Tableau Desktop Experience with calculated fields, parameters, table calculations, joins, and dashboard actions. Ability to publish workbooks and dashboards Project management: Ability to manage multiple projects simultaneously Microsoft Suite Proficiency Education & Experience Exposure to logistics, customer operations, or supply chain environments. 1-3 years of relevant experience in data analytics, reporting, project coordination, operations, or customer-facing roles. Preferred Skills & Certifications. Bachelor's degree in business, analytics, supply chain, information systems, or related field preferred. Familiarity with ERP, CRM, or operational data systems. Tableau certifications are a plus but not required. Tableau Desktop Specialist (TDS-C01). Tableau Certified Data Analyst (TDA-C01). TDP Bakery is an Equal Opportunity Employer and encourages applications from qualified individuals regardless of race, religion, national origin, sexual orientation, gender, disability, or any other category protected by law.

At Freeport-McMoRan, we are committed to providing an employment package that recognizes excellence, encourages safe production and a culture supported by our core values. Here, you'll find a collaborative environment where safety is a top priority, all opinions are valued, and people are empowered to grow in their career. Apply Today! Where You Will Work Located in southeastern Arizona, close to more than 4 million acres of national forest, employees and their families can connect with the great outdoors while fishing, rafting, hiking and more. Several educational institutions also are nearby, including a Northern Arizona University satellite campus, Eastern Arizona College, and the Gila Institute for Technology. Description Under close supervision, performs routine SX/EW and Leach testing functions. Duties include but are not limited to data collection, sample collection and preparation; mine site support and assist in the development and optimization of site processes. * Assist in the collection of data and samples, which may include traveling to mine sites * Assist in preparation of samples for analysis using appropriate established techniques and methods * Assist in the installation and set-up of instruments and equipment * May assist in maintaining laboratory, field instrumentation and equipment * May enter data into spreadsheets/databases * Follow and understand MSHA and OSHA rules and regulations, Environmental rules and regulations, Standard Operating Procedures (SOPs) and work area instructions * Participate in safety and environmental activities * Use plant and laboratory equipment correctly at all times * Perform housekeeping and other duties as required Qualifications Minimum Qualifications * Ability to communicate effectively, both verbally and in writing * Ability to develop and maintain awareness of occupational hazards and safety precautions * Ability to successfully work in a team environment Preferred Qualifications * High School Diploma or GED * Proficient in MS Excel to develop and maintain spreadsheets, reports and other documentation * SX/EW and Leaching experience * Mobile equipment experience, including overhead cranes * Experience with mathematic and/or numbers based tasks * Experience with chemical sample preparation and/or analysis * Ability to follow detailed, technical instructions, along with tedious or repetitive motions or tasks * Strong organizational and documentation skills * Ability and willingness to travel to mine sites with occasional overnight stay * Experience working in an ISO 9001/EMS 14001/OHSAS 18001 environment What We Offer You The estimated pay range for this role is currently $20.50 - $28.00/hour. This range reflects base salary only and does not include bonus payments, benefits or retirement contributions. Actual base pay is determined by experience, qualifications, skills and other job-related factors. This role is eligible for additional discretionary and incentive payment considerations based on company and individual performance. More details will be shared during the hiring process. Click here to view a sample of Total Rewards Estimate for this role. * Affordable medical, dental and vision benefits * Company-paid life and disability insurance * 401(k) plan with employer contribution/match * Paid time off, paid sick time, holiday pay, parental leave * Tuition assistance * Employee Assistance Program * Discounted insurance plans for pet, auto, home and vehicle * Internal progression opportunities * Learn more about our competitive and comprehensive benefits package! What We Require * Candidates may be required to pass a medical exam. * Candidates must pass all required training and/or testing. * Employees may be required to work a non-standard schedule, which may include shift work (other than day shift) at a 24/7, 365-day operation. * Ability to understand and apply verbal and written work and safety-related instructions and procedures given in English * Ability to communicate in English with respect to job assignments, job procedures, and applicable safety standards * Must be able to work in a potentially stressful environment * A valid driver's license is required * Work is in an outdoor, laboratory or mine setting, which may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electrical shock, toxic chemicals, explosives, fumes or airborne particles * While performing the duties of this job, the employee is regularly required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see. * Occasionally may be required to lift, push, pull or maneuver moderately heavy objects (up to 40 pounds) during the course of the workday * Personal protective equipment is required when performing work in a mine, outdoor, manufacturing or plant environment, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, rubber steel-toe boots, protective clothing, gloves and any other protective equipment as required * Freeport-McMoRan promotes a drug/alcohol-free work environment using mandatory pre-employment drug testing and on-going drug and alcohol testing, as allowed by applicable laws. Equal Opportunity Employer Please be advised that Freeport-McMoRan will never request payment for job-related expenses from applicants. If you receive any suspicious emails, please disregard them, and report the incident to ************.

About this role: Wells Fargo is seeking a Loan Documentation Processor in Credit Card department. Learn more about our career areas and lines of business at *********************** In this role, you will: Support in performing a variety of loan documentation duties on moderately complex loans to ensure compliance with company's policies and procedures for loan products Perform loan documentation for moderately complex loans Process and close for loan products Interpret Loan Documentation policies while analyzing applicant, property, and documentation, ordering all required verifications, documentation, and subsequent follow ups Receive direction from Loan Documentation supervisor and escalate non-routine questions Manage an assigned pipeline of loans and provide guidance and training to other Loan Documentation individuals Interact with immediate Loan Documentation team and functional area on routine process Required Qualifications: 2+ years of customer service, loan administration, collections, or sales environment experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education. Desired Qualifications: Experience with systems such as CUSP, FDR, IRRIS/XPM, SVP, or similar Knowledge and understanding of credit cards Independent self-starter with the ability to manage a pipeline of work Ability to analyze applicable policies and procedures to ensure the financial integrity of customers Proven strong phone etiquette skills Experience collaborating with other team members and lines of business to evaluate challenging situations Customer service focus and creative problem-solving techniques Strong analytical skills, high attention to detail and decision making ability Intermediate Microsoft Office skills Excellent verbal, written and interpersonal communication skills Ability to achieve high production and quality standards Be adaptable to constant change Ability to work effectively, as well as independently, in a team environment Job Expectations: S tart date: February 9th, 2026 Location: 2800 S Price Road Chandler, AZ 85286 Training Schedule: Monday-Friday (12 weeks in office) Work Schedule: Tuesday-Saturday 6:00am-3:30pm This position is not eligible for Visa sponsorship This position offers a hybrid work schedule Ability to work additional hours as needed Must be able to attend full duration of required onsite training period Posting End Date: 12 Jan 2026 *Job posting may come down early due to volume of applicants. We Value Equal Opportunity Wells Fargo is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other legally protected characteristic. Employees support our focus on building strong customer relationships balanced with a strong risk mitigating and compliance-driven culture which firmly establishes those disciplines as critical to the success of our customers and company. They are accountable for execution of all applicable risk programs (Credit, Market, Financial Crimes, Operational, Regulatory Compliance), which includes effectively following and adhering to applicable Wells Fargo policies and procedures, appropriately fulfilling risk and compliance obligations, timely and effective escalation and remediation of issues, and making sound risk decisions. There is emphasis on proactive monitoring, governance, risk identification and escalation, as well as making sound risk decisions commensurate with the business unit's risk appetite and all risk and compliance program requirements. Candidates applying to job openings posted in Canada: Applications for employment are encouraged from all qualified candidates, including women, persons with disabilities, aboriginal peoples and visible minorities. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process. Applicants with Disabilities To request a medical accommodation during the application or interview process, visit Disability Inclusion at Wells Fargo. Drug and Alcohol Policy Wells Fargo maintains a drug free workplace. Please see our Drug and Alcohol Policy to learn more. Wells Fargo Recruitment and Hiring Requirements: a. Third-Party recordings are prohibited unless authorized by Wells Fargo. b. Wells Fargo requires you to directly represent your own experiences during the recruiting and hiring process.

About the Role GMI is seeking a skilled Technical Account Manager (TAM) to serve as a trusted advisor and primary liaison between our Managed Service Desk customers and internal delivery teams. The TAM acts as the customer's advocate within GMI-ensuring alignment, facilitating service delivery, coordinating escalations, and driving continuous improvement. You will serve as a named point of contact for escalations, monthly reporting, quarterly business reviews, lifecycle management, and post-incident analysis. This position requires strong communication skills, technical knowledge, and the ability to deliver a superior customer experience. What You'll Do Customer Engagement & Escalation Management Serve as the primary point of contact for escalations and service coordination Lead internal and external customer kickoff calls alongside PMO team Support Quarterly Business Reviews and growth strategy discussions Communicate security risks or emerging threats that may impact customer environments Maintain customer-specific support documentation Review tickets for quality, accuracy, and compliance with standards Service Quality & Reporting Generate and review scheduled reports covering asset usage, health, lifecycle, and RCA Ensure the GMI support team stays informed of customer issues and priorities Facilitate internal resources to support customer initiatives Project & Delivery Support Collaborate with Sales and PMO on SOW creation, project structure, and profitability targets Ensure project prerequisites and documentation are in place before project kickoff Monitor delivery progress to address resource strain or technology gaps Communicate and manage customer expectations throughout the engagement Process & Practice Improvement Deliver customer feedback to internal teams to drive service enhancements Contribute to documentation, templates, SOPs, and delivery standards Assist in selecting and deploying tools that improve service delivery What You Bring Required Skills & Experience Minimum 7 years of experience in relevant IT services roles Strong presentation and executive communication skills Prior Network or Systems Engineering experience Ability to work decisively under pressure Experience with network/system monitoring tools Experience with cloud computing (AWS and/or Azure) Preferred Prior TAM experience Associate degree in CS, Engineering, MIS, CIS, or related field Additional Requirements Ability to sit at a computer for extended periods Light to moderate lifting as needed Must be US Citizen due to contract obligation Position may require ability to pass standard state and federal DPS Background checks and obtain an IV-D Fingerprint Clearance Card (Schools) Reasonable accommodations available for qualified individuals with disabilities Benefits and Perks We offer a comprehensive benefits package designed to support your professional growth and personal well-being, including 401(k) Plan with Company Match Health Coverage (Medical, Dental, Vision) Stock Appreciation Rights after one year with the company Open Paid Time-Off policy with Generous Vacation & Sick Time

FUJIFILM Electronic Materials, U.S.A., Inc., is a global leader in chemical solutions which enable the semiconductor industry and the digital universe. We have an exciting opportunity at our Mesa, AZ facility for an Associate Research Chemist! With state-of-the-art manufacturing facilities in the U.S., Europe, Taiwan, China, Korea and Japan, local sales offices throughout the world and on-site applications support, FUJIFILM Electronic Materials supplies the world's top tier semiconductor manufacturers with a broad array of products and services used throughout the semiconductor manufacturing process. The Role The Associate Research Chemist will be responsible for design, develop and commercialization of new semiconductor etchants, post etch selective cleaners and strippers for advanced technology. Company Overview FUJIFILM Electronic Materials, U.S.A. fuels innovation in the semiconductor industry-where chemistry meets technology. Our advanced materials and formulations enable manufacturers to build the microchips that power Artificial Intelligence, computers, electric vehicles, smartphones, and more. We're a global business-to-business supplier of chemical formulations and advanced materials used for manufacturing and packaging semiconductors. Our chemical formulations allow top manufacturers to produce microchips that both power and connect our digital world. Think you've got what it takes to build a more connected world? Then connect with us today and challenge the boundaries of what's possible-for the world and your future. We have six U.S. manufacturing and Research & Development facilities, located in: Mesa, Arizona; Castroville, California; Hollister, California; Carrollton, Texas; and North Kingstown, Rhode Island-each offering unique local experiences, from vibrant cultural scenes to historic charm. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Key responsibilities for this role include: * Responsible for applied research & development and commercialization of new post etch cleaners and selective etchants for advanced IC technologies. * Responsibilities include designing, lab testing and managing new chemical products under rigorous business and customer timelines. * Specific activities include: * Investigate and develop new chemical formulations for cleaning integrated circuit wafers with awareness of the status of the intellectual property field. * Perform wet bench formulation and testing of new chemicals to meet customer requirements. * Manage existing product testing and qualification using customer wafers. * Support thin film surface analysis using tools including Ellipsometer, 4-Point probe, XRR, XPS, TOF-SIMS, SEM. * Assist with IP searches and initial patent drafts. * Assist in pilot line builds of successful beaker formulations. * Generating and communicating product data and technical reports internally and to customers * Write and present internal presentation updating technical and business groups on project status. REQUIREMENTS * PhD in Chemistry with 1 to 5 years of experience in formulation. Prior industrial research experience in product development in semiconductor technology is highly prefered. * Experience in developing and applying inorganic or organic solution chemistry to meeting customer requirements. Must be comfortable working safely with hazardous chemicals. * Understanding Si wafer device processing in wet processing tool operation and process implementation. * Experience with thin film surface analysis tools such as Ellipsometer, 4-Point probe, XRR, XPS, TOF_SIMS, SEM * Must have a strong comprehension of surface cleaning methods and chemicals. * Must be proficient in design of experiments, technical writing, literature search processes and methods and Intellectual property processes and methods. * Must be a team player and collaborator. Must be able to communicate and work effectively with peers and customers. Organizational skills and prior project management experience desired. * This is a safety-sensitive position that requires candidates to successfully pass a post-offer drug screening prior to employment. One of the essential job functions is the ability to work in a constant state of alertness and in a safe manner. ADDITIONAL REQUIREMENTS We value a professional, adaptable, and collaborative work environment. The following competencies are essential for success in any role and reflect our commitment to effective teamwork, problem solving, and workplace communication. * Resilience -Ability to adapt to workplace challenges, maintain professionalism, and manage responsibilities effectively. * Communication -Capacity to clearly and professionally exchange ideas, interact respectfully with colleagues and customers, and foster positive workplace relationships. * Reasoning & Decision Making -Ability to analyze information, follow verbal and written instructions, and make logical, sound decisions. * Comprehension -Capability to understand and complete tasks as assigned and solve problems effectively. * Organizational Skills - Competence in managing multiple priorities, maintaining accuracy, and staying focused despite potential workplace distractions. To all agencies: Please, no phone calls or emails to any employee of Fujifilm about this requisition. All resumes submitted by search firms/employment agencies to any employee at Fujifilm via-email, the internet or in any form and/or method will be deemed the sole property of Fujifilm, unless such search firms/employment agencies were engaged by Fujifilm for this requisition and a valid agreement with Fujifilm is in place. In the event a candidate who was submitted outside of the Fujifilm agency engagement process is hired, no fee or payment of any kind will be paid. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (********************************).

BGI, a Certified Service-Disabled Veteran Owned Small Business, is seeking a highly qualified Live/Virtual/Constructive (LVC) Subject Matter Expert (SME) to support the 56th Range Management Office at Luke Air Force Base within the Live Mission Operations Center (LMOC). This position is contingent upon a contract award and offers an exciting opportunity to contribute to high-fidelity training for F-35 operations and other USAF training missions. The LMOC integrates multiple systems-air combat maneuvering instrumentation, FAA radar, Link 16, and surface-to-air threat emulators-to create a common operating picture for live mission execution. Job Responsibilities Serve as the main liaison between 56th Fighter Wing stakeholders, including Weapons and Tactics, Training, Plans/Programs, instructor pilots, and Range personnel. Develop and implement communication methods and scheduling processes for routine and long-term training operations. Act as the LVC Integrated Training expert for F-35 syllabus and continuation training missions. Support the creation of LVC profiles, coordinate mission requirements with instructor pilots, and manage Desired Learning Objectives (DLOs) during missions. Operate LVC control stations, perform Range Training Officer (RTO) duties, and manage data capture and debrief processes. Collaborate with software developers for system improvements and participate in beta testing. Develop and support LVC training scenarios that align with Luke AFB's F-35 training requirements. Ensure integration of LVC capabilities with other training systems (e.g., threat emitters, ACMI). Deliver mission briefings up to four times annually to educate operators on WIS resources. Track and report on daily utilization of LVC/SAM-1/RTO functions, and compile monthly and semi-annual feedback reports. Requirements Minimum Requirements: Active Secret SAR Security Clearance Strong familiarity with LVC systems, mission execution processes, and USAF training environments Ability to operate in real-time communication with pilots and mission control teams Experience working with USAF fighter squadrons, particularly in developing or supporting integrated training missions Excellent written and verbal communication skills, particularly for briefing and reporting to stakeholders Preferred Qualifications: Understanding of F-35 operations and tactics (not required, but highly beneficial) Experience supporting beta software testing and integration upgrades Previous work in a Live Mission Operations Center or similar high-fidelity training environment