Electrical Engineer Internship jobs at Merrick & Co - 1731 jobs

GAI Consultants, Inc. is seeking an EIT 1to work with the Power Generation Business Sector on primarily Power Generation projects and when needed other regional projects. GAI offers its employees the ability to work remotely or in a hybrid setting. The successful candidate will be working out of the Pittsburgh, PA or Richmond, VA officeand will perform both design and monitoring tasks under the supervision of a licensed professional engineer. Job Duties: Site Grading Plans Erosion and Sediment Control Plans Stormwater Management Plans Hydrologic and Hydraulic / Drainage Plans Utility Design and Relocation Plans Maintenance and Protection of Traffic Plans Geotechnical Investigations Permit Applications (earth disturbance permits, building permits, land development plans, high occupancy permits, etc.) Access Road Section Development Construction Drawings, Specifications, and Quality Control Plans Construction Cost Estimates Owner's Engineer Support During Construction Field Investigations Daily/Weekly Construction Inspections Earthwork Construction Quality Control Compaction Testing Concrete Testing ESC Inspections SWPPP Inspections Environmental Monitoring The candidate should have the desire and ability to travel to Project sites, as needed, primarily in the Midwest and Mid-Atlantic regions of the United States. Physical Requirements Ability to work indoors in professional office settings. Ability to sit for extended periods while performing computer-based tasks. Frequent use of hands and fingers for typing, writing, and handling office equipment. Visual acuity to read printed materials, digital screens, detailed documents, and perform detailed work. Occasional standing, walking, bending, or reaching within the office environment. Ability to move between workstations and attend in-person meetings. Ability to lift and carry office materials or equipment weighing up to 10-20 pounds, with or without assistance. Adequate hearing to participate in conversations, phone calls, and virtual meetings. Ability to travel for meetings, training, or business purposes. General Characteristics Possesses foundational engineering concepts through undergraduate-level education. Acquires basic knowledge and develops basic skills through mentored experience. Applies learned knowledge and skills to perform assigned tasks. Performs routine technical work which does not require previous experience. Minimum Years of Experience Entry / 0+ Education B.S. or M.S. Engineering Certification/Licensure Passed Fundamentals of Engineering (FE) exam and obtained engineer-in-training (EIT) or engineering-intern (EI) certification. Technical Responsibilities Collects data and gathers information or documents. Participates in laboratory testing and field investigations. Performs basic computations or analysis. Assists with preparation of engineering deliverables. Observes construction activities. Project and Task Management Responsible for personal task management and adherence to deadlines and scope. No managerial responsibilities at this level. Management Responsibility Receives close supervision on all aspects of assignments. Receives mentorship from a licensed engineer. Communication Skills Possesses basic oral and written communication skills. Identifies and acknowledges principles of teamwork and leadership. Interacts primarily with internal project team members. Why GAI: At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S., and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive salary -GAI is committed to paying market-based salaries Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short Term Disability (benefits start within 30 days of hire) New paid Maternity/Paternity/Adoption program Generous Paid Time Off and 7 paid holidays 401k company match Tuition Reimbursement Qualifications EducationBachelors of Engineering (required) Licenses & CertificationsDriver's License (required) EIT (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The ideal candidate will be responsible for implementing electrical components into devices. They will also help design and manufacture electrical products of all shapes and sizes. They should be able to make quality assurance checks in order to keep the product standard high. Responsibilities Evaluate electrical products and systems by designing testing methods Test finished products and system capabilities Keep necessary equipment operational Contribute to team efforts by accomplishing related results Qualifications Bachelor's degree in Electrical Engineering or related field Strong problem solving, technical, math and science skills Strong written and verbal communication

Corporate Electrical Engineer At The Intersect Group, we connect engineering professionals with organizations that are shaping the future of industrial manufacturing and infrastructure. Our client is a leading producer in the building materials industry, known for its commitment to operational excellence, safety, and innovation. With a diverse portfolio spanning cement, wallboard, and paper production, they offer a collaborative environment where engineers can lead impactful projects and drive technical advancement. Role Summary We are seeking a Corporate Electrical Engineer to lead the design, execution, and oversight of electrical engineering projects across multiple business units. Reporting directly to the VP of Engineering and Technology, this role is responsible for developing project scopes, managing contractors, and ensuring compliance with safety and performance standards. You will serve as a technical expert and project manager, supporting capital planning, commissioning, and operational improvements. The ideal candidate brings deep experience in heavy industrial environments, strong leadership capabilities, and a hands-on approach to electrical design and execution. Key Responsibilities Define project scope and objectives in collaboration with internal stakeholders. Develop specifications, drawings, cable schedules, loop sheets, and material take-offs. Manage contractors performing power studies and oversee OEM relationships. Lead contract negotiations and ensure timely execution, including FAT coordination. Execute electrical projects on time and within budget, managing third-party resources. Conduct FEED studies and contribute to cost estimates and design reviews. Design duct banks, grounding systems, electrical rooms, and cable tray layouts. Specify and procure electrical components including transformers, switchgear, VFDs, and motors. Lead inspections, arc flash studies, and commissioning activities. Mentor plant engineers and technical professionals across business units. Key Requirements Accredited bachelor's degree in Electrical Engineering. 5-10 years of experience in heavy industrial environments, preferably within engineering consulting and construction services. Strong project management skills with experience leading electrical scope-only projects. Expertise in electrical design including single line diagrams, loop sheets, and grounding systems. Familiarity with manufacturing processes for cement, wallboard, and paper. Ability to manage budgets, schedules, and reporting metrics (KPIs). Excellent communication and organizational skills. Willingness to travel 3-5 days per month to support project activities. Preferred Software Knowledge Microsoft Excel (Advanced), PowerPoint, Word EasyPower, ETAP, SKM Autodesk Revit & Navisworks Manage ElumTools Ready to Lead Industrial Innovation? If you're a seasoned electrical engineer ready to take ownership of high-impact projects and drive technical excellence across a national footprint, we encourage you to apply today. Submit your resume and contact information to The Intersect Group to be considered for this opportunity.

GAI Consultants, Inc. is seeking an EIT 2 to work with the Power Generation Business Sector on primarily renewable energy projects and when needed other regional projects. GAI Consultants, Inc. offers its employees, upon approval by supervisors, the ability to work remotely or in a hybrid setting. The successful candidate will enjoy working in a team-oriented environment that will utilize their college education and past work experience to develop professionally into a well-rounded engineer with the ability to grow in today's environment. The candidate will be based out of GAI's Richmond, VA, Warrenton, VA or Pittsburgh, PA offices and will perform both design and monitoring tasks under the supervision of a licensed professional engineer. Tasks include: Site Grading Plans Erosion and Sediment Control Plans Stormwater Management Plans Hydrologic and Hydraulic / Drainage Plans Utility Design and Relocation Plans Maintenance and Protection of Traffic Plans Geotechnical Investigations Permit Applications (earth disturbance permits, building permits, land development plans, high occupancy permits, etc.) Access Road Section Development Construction Drawings, Specifications, and Quality Control Plans Construction Cost Estimates Owner's Engineer Support During Construction Field Investigations Daily/Weekly Construction Inspections Earthwork Construction Quality Control Compaction Testing Concrete Testing ESC Inspections SWPPP Inspections Environmental Monitoring The candidate should have the desire and ability to travel to Project sites, as needed, primarily in the mid-west and Mid-Atlantic regions of the United States. General Characteristics Acquires fundamental knowledge and develops skills in a specific practice area through mentored experience. Applies standard techniques, procedures, and criteria to perform assigned tasks as part of a broader assignment. Minimum Years of Experience 2+ Education B.S. or M.S. Engineering Certification/Licensure Passed Fundamentals of Engineering (FE) exam and obtained engineer-in-training (EIT) or engineering-intern (EI) certification. Technical Responsibilities Performs basic design tasks. Assists on tasks such as: field activities, material testing, CADD work, permit applications, and report writing. Project and Task Management Responsible for personal task management and adherence to deadlines and scope. No managerial responsibilities at this level. Management Responsibility Receives close supervision on most aspects of assignments, particularly on difficult problems, and a general review of all aspects of work. Receives mentorship from a licensed engineer. Communication Skills Possesses basic oral and written communication skills. Engages in few project stakeholder interactions. Why GAI? At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive salary -GAI is committed to paying market-based salaries Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire) New paid Maternity/Paternity/Adoption program Generous Paid Time Off and 7 paid holidays 401k company match Qualifications EducationBachelors of Engineering (required) Experience2 years: Civil engineering experience (required) Preferred experience in AutoCAD, Civil 3D (required) Licenses & CertificationsDriver's License (required) EIT (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

GAI Consultants, Inc. is seeking an Engineer 1 to work with the Power Generation Business Sector on primarily renewable energy projects and when needed other regional projects. GAI Consultants, Inc. offers its employees, upon approval by supervisors, the ability to work remotely or in a hybrid setting, and this position is eligible for a sign-on bonus. The successful candidate will enjoy working in a team-oriented environment that will utilize their college education and past work experience to develop professionally into a well-rounded engineer with the ability to grow in today's environment. Your responsibilities in this position will include civil site work, including design, permitting, construction activities as well as beginning to develop client management and business development strategies. The candidate should be driven and be seeking the opportunity to: Work on energy-related projects with a focus on renewables Assist with leading civil site engineering tasks Assist with interfacing with clients on civil site tasks Assist with leading assigned project teams Assist with development of civil site proposals Assist with task management on assigned projects (schedules, budgets, and quality of work) The candidate will work on civil site engineering tasks including: Site Grading Plans Erosion and Sediment Control Plans Stormwater Management Plans Hydrologic and Hydraulic / Drainage Plans Utility Design and Relocation Plans Maintenance and Protection of Traffic Plans Geotechnical Investigations Permit Applications (earth disturbance permits, building permits, land development plans, high occupancy permits, etc.) Access Road Section Development Construction Drawings, Specifications, and Quality Control Plans Construction Cost Estimates Owner's Engineer Support During Construction Field Investigations General Characteristics Applies broad knowledge of principles and practices in a specific practice area. Independently evaluates, selects, and adapts standard techniques, procedures, and criteria. May act in responsible charge of projects. Acquires general knowledge of principles and practices of related fields, and ability to function on multidisciplinary teams. Applies leadership and teamwork skills to effectively plan, execute, and manage scopes, schedules, and budgets to meet project stakeholder needs. Minimum Years of Experience 4+ years of experience. Education B.S. Engineering Certification/Licensure Professional Engineer (P.E.) License Technical Responsibilities Designs a complete project, system, component, or process. Prepares complete plans, specifications, and other project documents. Designs and conducts investigations. Analyzes and interprets test data. Project and Task Management Assigns tasks to and directs other technical and non-technical staff. Plans and coordinates detailed aspects of the engineering work. Prepares scopes, budgets, and schedules for assignments. Assists with proposals to provide professional services or obtain funding for engineering projects or programs. Management Responsibility Receives general direction on key objectives. Receives guidance, when necessary, on unconventional/complex problems, direction on modified techniques, and new approaches on assignments with conflicting criteria. Assists with mentored experience to direct reports and junior staff through providing guidance, explaining professional responsibilities, and reviewing work products. Attends project meetings and presents specific aspects of engineering assignments. Communication Skills Communicates effectively to both technical and nontechnical audiences. Demonstrates empathy and critical listening skills. Why GAI? At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive salary -GAI is committed to paying market-based salaries Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire) New paid Maternity/Paternity/Adoption program Generous Paid Time Off and 7 paid holidays 401k company match Qualifications EducationBachelors of Engineering (required) ExperienceExperience with AutoCAD Civil 3D (preferred) 4 years: Relevant civil engineering experience (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Field Engineer will serve as engineering support for our sales team assisting with construction management and after-sales field support. This role will require frequent travel to job sites throughout a specific territory but will be based at our sales office in Tampa. The position will include both field and office work. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, troubleshooting, and application engineering processes etc. Why Work for CaptiveAire? Nation's leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I can confidently say that I've never been part of a more focused company, working as one big team to achieve amazing success. There is never a day you don't learn something new at CaptiveAire. I am able to learn something new due to the freedom to take on new tasks independently and problem solve. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I'm empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: This position will encompass a wide variety of tasks where one day does not look exactly like the next. The projects our team handles are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Estimated 50% to 75% of time spent in the field on job sites Supporting installations and equipment start ups to ensure high quality outcomes and adherence to engineering principles Handling complex troubleshooting issues Customer service and coordination with all parties - CaptiveAire team, contractors, engineers, installers, CaptiveAire Service Primary Job Responsibilities: A combination of being in the field working on job sites and data analysis and remote troubleshooting using building management system (travel required) Product Support - Troubleshoot issues with existing and newly installed equipment in the field and provide immediate solutions Maintain expert level knowledge of all CaptiveAire products Work closely with engineering team, service team, local sales team and customers to help find best outcomes on installed jobs On site for construction trade coordination meetings and startups to ensure a good outcome Review and analyze data gathered from installed equipment in order to make product improvements, utilizing our CASLink remote monitoring system Use mechanical building design knowledge to review applications for customers and suggest improvements in operation Perform 3rd party training for outside contractors on CaptiveAire products Provide reports to Regional Manager as well as other teams on customer feedback/challenges, quality, product improvements/issues Required skills: 0-5 yrs experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Hands on, technical internship/co-op experience is preferred Must enjoy hands on product exposure HVAC and/or electrical experience strongly preferred Multi-tasking, problem solving and strong communication skills a must MUST BE A "GO GETTER"! Must be able to travel for training Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #LI-TL1 #P1

Required Qualifications & Experience MUST HAVE Altium experience. Client will not consider candidates without Altium Strong experience with MOSFET applications and power electronics design Proven experience in PCB schematic design, layout, and fabrication Hands-on experience with electrical measurements, sensing, and protection circuits Experience designing systems operating in the High Voltage, 36V-150V voltage range and 10A-80A current range Practical, hands-on experience working in a lab environment, including testing and validation Solid experience working with battery-based systems (all battery chemistries considered) lithium batteries, lead acid batteries, ANY TYPE OF BATTERIES Preferred Qualifications Experience with MCU and peripheral circuit design Familiarity with communication interfaces (e.g., CAN, UART, SPI, I²C, etc.) Experience with higher voltage and/or higher current power systems Knowledge of EMC/EMI mitigation and radiation-compliant design practices

GAI Consultants, Inc. is seeking an EIT 2 to work with the Power Generation Business Sector on primarily renewable energy projects and when needed other regional projects. GAI Consultants, Inc. offers its employees, upon approval by supervisors, the ability to work remotely or in a hybrid setting. The successful candidate will enjoy working in a team-oriented environment that will utilize their college education and past work experience to develop professionally into a well-rounded engineer with the ability to grow in today's environment. The candidate will be based out of GAI's Richmond, VA, Warrenton, VA or Pittsburgh, PA offices and will perform both design and monitoring tasks under the supervision of a licensed professional engineer. Tasks include: Site Grading Plans Erosion and Sediment Control Plans Stormwater Management Plans Hydrologic and Hydraulic / Drainage Plans Utility Design and Relocation Plans Maintenance and Protection of Traffic Plans Geotechnical Investigations Permit Applications (earth disturbance permits, building permits, land development plans, high occupancy permits, etc.) Access Road Section Development Construction Drawings, Specifications, and Quality Control Plans Construction Cost Estimates Owner's Engineer Support During Construction Field Investigations Daily/Weekly Construction Inspections Earthwork Construction Quality Control Compaction Testing Concrete Testing ESC Inspections SWPPP Inspections Environmental Monitoring The candidate should have the desire and ability to travel to Project sites, as needed, primarily in the mid-west and Mid-Atlantic regions of the United States. General Characteristics Acquires fundamental knowledge and develops skills in a specific practice area through mentored experience. Applies standard techniques, procedures, and criteria to perform assigned tasks as part of a broader assignment. Minimum Years of Experience 2+ Education B.S. or M.S. Engineering Certification/Licensure Passed Fundamentals of Engineering (FE) exam and obtained engineer-in-training (EIT) or engineering-intern (EI) certification. Technical Responsibilities Performs basic design tasks. Assists on tasks such as: field activities, material testing, CADD work, permit applications, and report writing. Project and Task Management Responsible for personal task management and adherence to deadlines and scope. No managerial responsibilities at this level. Management Responsibility Receives close supervision on most aspects of assignments, particularly on difficult problems, and a general review of all aspects of work. Receives mentorship from a licensed engineer. Communication Skills Possesses basic oral and written communication skills. Engages in few project stakeholder interactions. Why GAI? At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive salary -GAI is committed to paying market-based salaries Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire) New paid Maternity/Paternity/Adoption program Generous Paid Time Off and 7 paid holidays 401k company match Qualifications EducationBachelors of Engineering (required) Experience2 years: Civil engineering experience (required) Preferred experience in AutoCAD, Civil 3D (required) Licenses & CertificationsDriver's License (required) EIT (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

GL Staffing is seeking for a Manufacturing Engineer - Electrical with expertise necessary to design, develop, and implement manufacturing systems, processes, and tooling that support plant production activities. Salary: 70k - 80k a year (Based on experience) Location: Orlando, FL Job Duties and Responsibilities Develops test, manufacturing, and various assembly processes. Designs, develops, and maintains electrical/electronic test fixtures, jigs, and automated test equipment (ATE). Uses engineering tools and statistical concepts to maintain and continuously improve manufacturing processes. Investigates process issues and initiates corrective actions. Generates and maintains production-level documentation and operating procedures. Specifies and initiates the purchase of manufacturing tools, equipment, and supplies. Plans, specifies, and justifies capital equipment expenditures. Leads product and/or process improvement teams. Designs and develops test systems and electronic systems to support product testing and manufacturing. Collaborates closely with cross-functional engineering teams in a concurrent engineering environment. Performs other duties as assigned. Knowledge & Skills Familiarity with electronic design of test fixtures and systems is required. Hands-on role requiring interaction across multiple disciplines within a manufacturing environment. Proficiency with software applications such as Microsoft Word, Excel, and PowerPoint. Experience with AutoCAD, SolidWorks, Minitab, and Microsoft AX is preferred. Strong written and verbal communication skills are required. Education Bachelor's degree in Electrical Engineering Three (3) years of engineering experience in a manufacturing environment. Must be able to handle ITAR-controlled documents without requiring an export license. Physical Requirements & Working Environment Ability to sit and stand for extended periods. Primarily office-based work environment. Minimal lifting required. Compensation & Benefits Comprehensive medical, dental, and vision insurance. 401(k) retirement savings plan. Paid Time Off (PTO). Company-paid life insurance. Company-paid short-term and long-term disability insurance. Opportunities for career advancement and professional development. Apply now!

At I.C. Thomasson Associates, Inc, A Salas O'Brien Company we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: The ideal candidate to fill this position is an Electrical Engineer that is competent and confident in his/her abilities as an electrical engineer, especially with experience in commercial work. This person would be a Project Manager of multiple projects, work with an internal MEP/FP team to deliver projects that meet the objectives of the architect/owner. Business Development acumen is important, so understanding business development is a plus and opens many avenues for advancement. These activities may include developing an action plan to solicit and secure new work, implementation of goals, objectives, and priorities for the Nashville office, identifying prospective markets and clients, etc. Responsibilities: Knowledge of electrical engineering principles in the field of building construction. Capable of increasing technical competency with experience and work ethic. Ability to effectively communicate with architects, owners and contractors. Ability to work well independently and as part of a strong team. Excellent organization and time management skills . ICT encourages the growth of all our engineers to take a more responsible and leadership role based on experience. Qualifications: B.S. in Electrical Engineering 7+ years of work experience with complex building electrical systems in the commercial and institutional sector. Registered Professional Engineer, with Tennessee P.E. license, or ability to obtain a Tennessee P.E. license. Experience with Revit Excellent written and oral communication skills essential for team-based projects. Excellent planning and organizational skills required for simultaneous project schedules. Highly motivated, proactive and willing to take on new challenges. Willing to travel. Benefits: Gain invaluable industry experience and practical engineering skills. Work with a diverse team of professionals, fostering networking opportunities. Access to mentorship and guidance from experienced engineers. Competitive compensation package. Location: Nashville, TN Travel: Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

A multidisciplinary design firm in Denver is seeking an experienced MEP Engineer to lead design and project management across various sectors. The role requires a Bachelor's in Electrical or Architectural Engineering, a PE license, and over 10 years of experience in MEP engineering with proficiency in Revit. Join a collaborative team dedicated to innovative design solutions while enjoying hybrid work options and comprehensive benefits, including flexible hours and a minimum of 15 days PTO. #J-18808-Ljbffr

HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. CMTA is a mechanical, electrical, and civil engineering consulting firm, specializing in building system design, services, and innovative solutions. At CMTA we care about people. We care about the success and wellbeing of our employees, clients, and communities. This translates into an unparalleled work environment and a superior client experience that thrives on integrity, quality, collaboration, and smart innovation. Through our culture shaped by our values, our mission of positively impacting people through innovative facility solutions will be possible. **Job Summary:** This position will perform routine engineering assignments under supervision from a knowledgeable mentor in the field. The Electrical Engineering Intern will gain hands-on experience and mentorship from an Electrical Engineer. The Electrical Engineer Intern will gain knowledge in communication with clients, engineering design elements, and manage sections of a project based on extend of knowledge with final approval from manager on majority of responsibilities. This position will collaborate with other engineers to ensure projects move forward smoothly while gaining knowledge and experience in the electrical department. The intern will complete other duties and responsibilities assigned to assist the electrical department and ensure a successful project completion. **Essential Duties and Responsibilities:** + Assist in engineer power, lighting, communications, and life safety for assigned projects. + Occasionally required presence at onsite visits with construction administration. + Effectively answer questions, stay on schedule, and follow a budget to ensure a project is completed successfully. + Professionally interact with designers, technicians, construction administration, and clients as needed. + Efficiently develop and maintain a balance and schedule between all projects and deadlines. + Seek mentorship and support to guarantee successful design and project completion. + Other duties and responsibilities as assigned. **Qualifications:** + Currently pursuing a degree in Electrical Engineering or related field. + Junior or Senior status preferred. + Proven ability to work successfully on a team and listen carefully. + Desire to produce quality work and grow professionally in the engineering field. + Strong written and verbal communication skills. + Proficiency in the use of Microsoft Office products. + Proven ability to maintain excellent integrity and ethical standards within role. No sponsorship available for this position. \#LI-ACI #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Financial Benefits** **:** 401(k) retirement savings plan **Time Off Benefits** **:** Paid sick leave **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly** **Education Level** **Bachelor's Degree**

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start **May 2026** **and go through Summer 2026. Dates are flexible with school calendar** . Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. + Produce detailed layout and equipment details of electrical systems of buildings, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** + Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), + Strong interest in Building Systems Electrical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

CMTA is a mechanical, electrical, and civil engineering consulting firm, specializing in building system design, services, and innovative solutions. At CMTA we care about people. We care about the success and wellbeing of our employees, clients, and communities. This translates into an unparalleled work environment and a superior client experience that thrives on integrity, quality, collaboration, and smart innovation. Through our culture shaped by our values, our mission of positively impacting people through innovative facility solutions will be possible.Job Summary:This position will perform routine engineering assignments under supervision from a knowledgeable mentor in the field. The Electrical Engineering Intern will gain hands-on experience and mentorship from an Electrical Engineer. The Electrical Engineer Intern will gain knowledge in communication with clients, engineering design elements, and manage sections of a project based on extend of knowledge with final approval from manager on majority of responsibilities. This position will collaborate with other engineers to ensure projects move forward smoothly while gaining knowledge and experience in the electrical department. The intern will complete other duties and responsibilities assigned to assist the electrical department and ensure a successful project completion.Essential Duties and Responsibilities: Assist in engineer power, lighting, communications, and life safety for assigned projects. Occasionally required presence at onsite visits with construction administration. Effectively answer questions, stay on schedule, and follow a budget to ensure a project is completed successfully. Professionally interact with designers, technicians, construction administration, and clients as needed. Efficiently develop and maintain a balance and schedule between all projects and deadlines. Seek mentorship and support to guarantee successful design and project completion. Other duties and responsibilities as assigned. Qualifications: Currently pursuing a degree in Electrical Engineering or related field. Junior or Senior status preferred. Proven ability to work successfully on a team and listen carefully. Desire to produce quality work and grow professionally in the engineering field. Strong written and verbal communication skills. Proficiency in the use of Microsoft Office products. Proven ability to maintain excellent integrity and ethical standards within role. No sponsorship available for this position.#LI-ACI #LI-Onsite

We are seeking a motivated and detail-oriented Electrical Engineering Intern to support our engineering team with the design, testing, analysis, and documentation of electrical systems and components. This internship offers hands-on experience working on real-world engineering projects in a collaborative, professional environment. Aptim is a leading provider in integrated, comprehensive services in a variety of markets and industry. We offer consulting, engineering, construction, scientific program and project management services to meet the customer needs in environmental and infrastructure markets. Our highly skilled multi-discipline teams of professionals are strategically located throughout the United States and abroad to efficiently provide safe and sustainable solutions to complex challenges faced by government, public institutions, and commercial clients. This is a temporary position. The STRIVE Internship Program is a 12-week experience running from May 18, 2026 through August 7, 2026. Interns are required to be fully available during Week 1 (May 18--22) and Week 12 (August 3--7) of the program. Week 12 includes company-paid travel to an APTIM office (location to be announced) for an end-of-internship celebration. Interns are expected to minimize absences to ensure a meaningful program experience. The program observes Memorial Day (May 25, 2026) and Independence Day (July 3, 2026, observed). Key Responsibilities/Accountabilities: Work activities include collection and interpretation of engineering data, development of project design basis, development of specifications, and performance of detailed engineering. Assist in the design and development of electrical systems and components Support schematic creation, wiring diagrams, and layouts Assist with electrical testing, troubleshooting, and validation Collect and analyze engineering data Support testing Prepare technical documentation, specifications, and reports Participate in design reviews and engineering meetings Follow company safety, quality, and compliance standards Ensures conformance to applicable engineering codes and standards as well as company policies and procedures. Is aware of costs and schedule related to own work. Organizes own work to meet deadlines set by others. Communicates information, asks questions and checks for understanding. Contributes to a team environment Basic Qualifications: Currently pursuing a Bachelor's or Master's degree in Electrical Engineering Completion of at least one year of core engineering coursework Basic understanding of circuit analysis and electrical principles Proficiency with Microsoft Office (Excel, Word, PowerPoint) Strong problem-solving, communication, and organizational skills Ability to work independently and in a team environment Has basic knowledge of theories, practices and procedures in electrical engineering. Experience with schematic capture or PCB design tools Familiarity with test equipment (multimeters, oscilloscopes, power supplies) Basic knowledge of power systems, controls, or electronics Programming experience (MATLAB, Python, C/C++, or PLCs, CADD) Prior internship, lab, or relevant project experience FE and EIT candidates preferred. Ability to work independently and in a diverse team setting Willingness to work across Engineering disciplines Strong multitasking skills Strong problem-solving skills About APTIM APTIM enhances the quality of the environment, wellbeing of people, resilience of communities, and opportunity for employees to make a difference, not just a living. A leading professional solutions firm, we specialize in environmental, sustainability, resilience, and infrastructure solutions. Our team of experts provide these integrated solutions for forward-thinking government agencies, commercial and industrial clients, and energy customers. Together, we create sustainable and resilient communities for all. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $22 to $24.13 per hour. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Watch our video: About APTIM - In Pursuit of Better

We are seeking a motivated and detail-oriented **Electrical Engineering Intern** to support our engineering team with the design, testing, analysis, and documentation of electrical systems and components. This internship offers hands-on experience working on real-world engineering projects in a collaborative, professional environment. Aptim is a leading provider in integrated, comprehensive services in a variety of markets and industry. We offer consulting, engineering, construction, scientific program and project management services to meet the customer needs in environmental and infrastructure markets. Our highly skilled multi-discipline teams of professionals are strategically located throughout the United States and abroad to efficiently provide safe and sustainable solutions to complex challenges faced by government, public institutions, and commercial clients. This is a **temporary** position. The STRIVE Internship Program is a 12-week experience running from **May 18, 2026 through August 7, 2026** . Interns are required to be fully available during **Week 1 (May 18--22)** and **Week 12 (August 3--7)** of the program. Week 12 includes **company-paid travel to an APTIM office** (location to be announced) for an end-of-internship celebration. Interns are expected to minimize absences to ensure a meaningful program experience. The program observes **Memorial Day (May 25, 2026)** and **Independence Day (July 3, 2026, observed)** . **Key Responsibilities/Accountabilities:** + Work activities include collection and interpretation of engineering data, development of project design basis, development of specifications, and performance of detailed engineering. + Assist in the design and development of electrical systems and components + Support schematic creation, wiring diagrams, and layouts + Assist with electrical testing, troubleshooting, and validation + Collect and analyze engineering data + Support testing + Prepare technical documentation, specifications, and reports + Participate in design reviews and engineering meetings + Follow company safety, quality, and compliance standards + Ensures conformance to applicable engineering codes and standards as well as company policies and procedures. + Is aware of costs and schedule related to own work. + Organizes own work to meet deadlines set by others. + Communicates information, asks questions and checks for understanding. + Contributes to a team environment **Basic Qualifications:** + Currently pursuing a Bachelor's or Master's degree in **Electrical Engineering** + Completion of at least one year of core engineering coursework + Basic understanding of circuit analysis and electrical principles + Proficiency with Microsoft Office (Excel, Word, PowerPoint) + Strong problem-solving, communication, and organizational skills + Ability to work independently and in a team environment + Has basic knowledge of theories, practices and procedures in electrical engineering. + Experience with schematic capture or PCB design tools + Familiarity with test equipment (multimeters, oscilloscopes, power supplies) + Basic knowledge of power systems, controls, or electronics + Programming experience (MATLAB, Python, C/C++, or PLCs, CADD) + Prior internship, lab, or relevant project experience + FE and EIT candidates preferred. + Ability to work independently and in a diverse team setting + Willingness to work across Engineering disciplines + Strong multitasking skills + Strong problem-solving skills **About APTIM** APTIM enhances the quality of the environment, wellbeing of people, resilience of communities, and opportunity for employees to make a difference, not just a living. A leading professional solutions firm, we specialize in environmental, sustainability, resilience, and infrastructure solutions. Our team of experts provide these integrated solutions for forward-thinking government agencies, commercial and industrial clients, and energy customers. Together, we create sustainable and resilient communities for all. What you can expect from APTIM: + Work that is worthy of your time and talent + Respect and flexibility to live a full life at work and at home + Dogged determination to deliver for our clients and communities + A voice in making our company better + Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $22 to $24.13 per hour. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. **Watch our video:** About APTIM - In Pursuit of Better (******************************************** Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may make their request known by e-mailing ********************************** or calling ************ for assistance. EOE/Vets/Disability

We are seeking a motivated and detail-oriented Electrical Engineering Intern to support our engineering team with the design, testing, analysis, and documentation of electrical systems and components. This internship offers hands-on experience working on real-world engineering projects in a collaborative, professional environment. Aptim is a leading provider in integrated, comprehensive services in a variety of markets and industry. We offer consulting, engineering, construction, scientific program and project management services to meet the customer needs in environmental and infrastructure markets. Our highly skilled multi-discipline teams of professionals are strategically located throughout the United States and abroad to efficiently provide safe and sustainable solutions to complex challenges faced by government, public institutions, and commercial clients. This is a temporary position. The STRIVE Internship Program is a 12-week experience running from May 18, 2026 through August 7, 2026. Interns are required to be fully available during Week 1 (May 18--22) and Week 12 (August 3--7) of the program. Week 12 includes company-paid travel to an APTIM office (location to be announced) for an end-of-internship celebration. Interns are expected to minimize absences to ensure a meaningful program experience. The program observes Memorial Day (May 25, 2026) and Independence Day (July 3, 2026, observed). Key Responsibilities/Accountabilities: * Work activities include collection and interpretation of engineering data, development of project design basis, development of specifications, and performance of detailed engineering. * Assist in the design and development of electrical systems and components * Support schematic creation, wiring diagrams, and layouts * Assist with electrical testing, troubleshooting, and validation * Collect and analyze engineering data * Support testing * Prepare technical documentation, specifications, and reports * Participate in design reviews and engineering meetings * Follow company safety, quality, and compliance standards * Ensures conformance to applicable engineering codes and standards as well as company policies and procedures. * Is aware of costs and schedule related to own work. * Organizes own work to meet deadlines set by others. * Communicates information, asks questions and checks for understanding. * Contributes to a team environment Basic Qualifications: * Currently pursuing a Bachelor's or Master's degree in Electrical Engineering * Completion of at least one year of core engineering coursework * Basic understanding of circuit analysis and electrical principles * Proficiency with Microsoft Office (Excel, Word, PowerPoint) * Strong problem-solving, communication, and organizational skills * Ability to work independently and in a team environment * Has basic knowledge of theories, practices and procedures in electrical engineering. * Experience with schematic capture or PCB design tools * Familiarity with test equipment (multimeters, oscilloscopes, power supplies) * Basic knowledge of power systems, controls, or electronics * Programming experience (MATLAB, Python, C/C++, or PLCs, CADD) * Prior internship, lab, or relevant project experience * FE and EIT candidates preferred. * Ability to work independently and in a diverse team setting * Willingness to work across Engineering disciplines * Strong multitasking skills * Strong problem-solving skills About APTIM APTIM enhances the quality of the environment, wellbeing of people, resilience of communities, and opportunity for employees to make a difference, not just a living. A leading professional solutions firm, we specialize in environmental, sustainability, resilience, and infrastructure solutions. Our team of experts provide these integrated solutions for forward-thinking government agencies, commercial and industrial clients, and energy customers. Together, we create sustainable and resilient communities for all. What you can expect from APTIM: * Work that is worthy of your time and talent * Respect and flexibility to live a full life at work and at home * Dogged determination to deliver for our clients and communities * A voice in making our company better * Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $22 to $24.13 per hour. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Watch our video: About APTIM - In Pursuit of Better