MetalTek International jobs in Waukesha, WI - 55 jobs

Internship Description MetalTek International is an industry leader providing metal component solutions to customers from around the world with products that reach the depths of the oceans to the depths of space. MetalTek employs nearly 800 people in four locations worldwide. Our employees are Making A Lasting Difference and enjoy an environment where their efforts are rewarded, continuous improvement is valued, and career growth is encouraged. The Wisconsin Centrifugal Division of MetalTek International has been a proud member of the Waukesha community for over 75 years. We are conveniently located 2 miles Southeast of I-94 and HWY F. Consider a career at one of the largest centrifugal foundries in the world! We are now hiring a Metallurgical Intern for the summer. Projects may include: Melt Practice revisions (includes working with melters on floor) Defect analysis (micro/macro structures) Effect of casting parameters on quality and properties Heat Treatment studies Requirements Individuals working on Materials/Metallurgical degrees with a minimum junior status preferred. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $25.00/hr.

Essential Job Functions: * Picking and receiving: In-process materials/completed parts. * Replacement parts packing and processes and procedures. * Operates all vehicles to schedule. * Use of non-precision tools; cutting, sawing, and hammering. * Routine maintenance for handling equipment. * Loads and unloads trucks. * Receiving vendor material activities. * Call for trucks. * Maintain departmental housekeeping and 5S standards. * Ability to perform job functions in a safe manner. * Ability to wear all Personal Protective Equipment (P.P.E.) required by Company Policy for the job being performed. * Know and follow established job specific and facility wide safety and health procedures and rules. * Actively participate in safety and health training and demonstrate competency based on training received. * Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. Job Requirements/Working Conditions: * High School Diploma or GED preferred. * 2 - 4 years Material Handling experience. * Must be able to pass Forklift Certification Test. * Basic computer skills required. * Ability to operate overhead cranes. * Must be able to work individually and with others. * Ability to lift and carry 50 lbs. up to 100 feet. * Normal shop working environment. * Must be able and willing to work any shift and overtime.

The Controller oversees all financial reporting, forecasting and financial analysis for the Weasler West Bend Plant. This role will be the finance partner to the operations, plant, and supply chain leaders. The Controller will be responsible for the review of month-end financials related to operations, be active in monthly/quarterly outlooks, and ensure financial results are recorded in accordance with Generally Accepted Accounting Principles (GAAP) and Company finance policies. The role will coordinate the monthly financial close process and serves as a key point of contact for internal and external auditors. The Controller will work with the Sales team to review quotes and contracts for margin accuracy and appropriateness based on volume and production complexity. The Key responsibilities include the ownership of the manufacturing expense and gross profit adjustment portions of the income statement and balance sheet. The successful candidate will be self-motivated and have strong problem solving, analytic, accounting, and interpersonal skills. This position will coordinate with the Controller in Mexico for various items. Key Responsibilities & Duties: • Actively participate and complete in-depth financial reviews and report out to operations management, partnering with the Controller, to ensure accuracy of monthly results. • Create and maintain standardized daily/weekly financial reporting tools to analyze results and drive changes to reduce costs and achieve monthly financial targets. • Assist in the preparation of the annual financial plan, quarterly forecasts, and monthly/weekly financial outlooks. • Work closely with operations management to understand business conditions and adjust plant spend to account for changes. • This role will assist plant leadership in financial justification and support of capital spend requests. • Assist in the standard costing process by providing a forward-looking view of anticipated costs on a minimum yearly basis. • Additionally, this role will develop processes to ensure financial predictability by driving improvement in spend forecasting for production related expenses. • Participate in other projects related to cost down initiatives, capital investments, manufacturing spend, operational improvements, ERP upgrades/implementations and other business initiatives. • Performs other duties as assigned. An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position . The above list reflects the general details necessary to describe the principle and essential functions of the position and shall not be construed as the only duties that may be assigned for the position. Requirements • Bachelor's Degree in Accounting/Finance. • 7+ years accounting experience, in a manufacturing environment. • Able to adjust to changing priorities - ability to prioritize work and meet deadlines. • The successful candidate will be a highly motivated team player with excellent interpersonal, analytical, and problem-solving skills. • Strong written and verbal communication skills. • Excellent organizational skills, with the ability to analyze a situation quickly and accurately and arrive at an effective fact-based decision or solution. • Demonstrated ability to collaborate with cross functional teams. • Self-motivated and proactive, both with respect to managing workload and own professional development-strong work ethic. Technology/Equipment: • Proficiency in the use of technology including thorough understanding of Microsoft Teams, SharePoint, Microsoft PowerPoint, Word and Excel. • Proficiency in the use of technology including thorough understanding of ERP Systems. • Hyperion HFM Experience. • Advanced Microsoft Excel Skills (Pivot Tables, Summits, etc). Benefits: · Comprehensive health benefits package (medical, dental, vision, etc.) for positions of 30 hours or more per week. · Health Savings Account with annual employer contribution. · Company provided Life Insurance, Accidental Death and Dismemberment, and Short-Term Disability. · Voluntary Life Insurance, Spousal Life, Child Life, Critical Illness, Accident, and Long-Term Disability. · 401(k) with matching contribution that is fully vested from day one. · Generous amount of PTO, plus 14 paid Holidays. · Tuition reimbursement and scholarship opportunity. · $250 in Lifestyle Reimbursement Account upon completion of annual physical. · Wellness program with monthly themes, quarterly challenges, onsite flu shot clinics and biometric screenings. · Clean and safe work environment. Equal Opportunity Employer: We are proud to foster an inclusive and diverse workplace culture. We are an equal opportunity employer and are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, or any other characteristic protected by applicable federal, state, or local law. We value diversity and believe that a diverse and inclusive workforce is essential to drive innovation, foster creativity, and achieve success. We welcome and encourage applications from individuals of all backgrounds and are dedicated to ensuring a fair and equitable recruitment and employment process for everyone.

Full-time Description This engineering position has responsibility for the quality and continuous improvement of machining processes and documentation in WC's Main Machine Shop. Duties would include enhancement of machining capabilities and providing the Manufacturing Engineering Group with accurate information to use in the creation of routings for machining operations. This role serves as an expert resource to the organization on machining processes and techniques with an emphasis on new products, difficult machining operations, and process improvement along with identification of new tooling and/or fixturing needs to increase MetalTek's machining abilities. This position is also responsible for overseeing the machine shop Tool Room/Tool Crib, the design, manufacture, storage, distribution, maintenance, and ordering of all standard and special tooling and fixturing for WC's machining processes. This position will also be expected to assist the Machine Shop Manager in the development and execution of the Machine Shop capital plans. Requirements The person we seek should have extensive knowledge of machining practices, fixturing, tooling, and programming. A bachelor's degree in Engineering plus 7+ years of technical experience in machining applications is preferred. Alternatively, Journeyman-type training plus relevant technical course work and/or experience would be acceptable. At least two years of experience in a supervisory or lead role are required. Strong skills in CAD with preference give to Siemens NX, data analysis, communication and prioritization are also needed. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $71985-$136455/Year

Internship Description MetalTek International is an industry leader providing metal component solutions to customers from around the world with products that reach the depths of the oceans to the depths of space. MetalTek employs nearly 800 people in four locations worldwide. Our employees are Making A Lasting Difference and enjoy an environment where their efforts are rewarded, continuous improvement is valued, and career growth is encouraged. The Wisconsin Centrifugal Division of MetalTek International has been a proud member of the Waukesha community for over 75 years. We are conveniently located 2 miles Southeast of I-94 and HWY F. Consider a career at one of the largest centrifugal foundries in the world! We are now hiring an Electrical Intern for the summer. Projects may include: Electrical inventory including verification and organization Sourcing repair parts Evaluating assets for appropriate electrical spare parts Updating drawings and schematics (experience with AutoCAD electrical preferred). Requirements Individuals working on Electrical or Industrial Maintenance degrees with a minimum junior status preferred. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $25.00/hr.

WILLING TO TRAIN CANDIDATES WITH MECHANICAL APTITUDE! MetalTek International is an industry leader providing metal component solutions to customers from around the world with products that reach the depths of the oceans to the depths of space. MetalTek employs nearly 800 people in five locations worldwide. Our employees are Making A Lasting Difference and enjoy an environment where their efforts are rewarded, continuous improvement is valued, and career growth is encouraged. The Wisconsin Centrifugal Division of MetalTek International has been a proud member of the Waukesha community for over 75 years. We are conveniently located 2 miles Southeast of I-94 and HWY F and offer a comprehensive benefits package. Consider a career at one of the largest centrifugal foundries in the world! Some key responsibilities include: * Repair and maintain CNC & manual machinery and support equipment, including diagnosis of machine issues, complete disassembly, inspection and repair. * Participate in complete machine rebuilds. * Layout and machine replacement components as needed to complete equipment repairs. * Check and correct machine alignments. * Remove and install precision bearings. * Coordinate projects as needed Requirements * Experience in the repair of CNC & manual machine tools preferred. * Heavy industrial and mechanical equipment experience a plus. * Technical education in Industrial Machine Repair, apprenticeship or similar education and experience preferred. * Ability to undertake and complete projects with minimal supervision. * Ability to lift and carry 50lbs. * Ability to climb, kneel, crawl and reach into different areas that need to be worked on. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $28.39 - $42.59/Hour

Full-time Description MetalTek International solves customer metals challenges employing the industry's leading combination of broad metals, process expertise and technology. Employing diverse casting methods, including centrifugal casting, investment casting, sand casting and continuous casting, machining, fabrication, and testing capabilities, MetalTek produces components that meet or exceed heat, wear, corrosion and compliance requirements. Headquartered in Waukesha, WI, USA, MetalTek operates facilities worldwide utilizing over 1,000,000 square feet of manufacturing space. Deep metallurgical knowledge, innovative hybrid casting solutions, broad metals technologies, and numerous industry certifications allow MetalTek to provide proven metal solutions for multiple high performance markets including aerospace, petrochemical processing, mining, nuclear power and turbine engine. MetalTek offers a wide variety of career opportunities, with challenges and rewards as diverse as the products we manufacture. We recognize the value of each person's contribution to the success of our team. Wisconsin Centrifugal's Maintenance Department in Waukesha, WI, currently has a need for a 3rd shift Industrial Electrician. Duties include: Working from diagrams and schematics, install and service plant electrical distribution and control systems including work on switches, control panels, electronic devices and other related gear. Troubleshoot, repair, and maintain a wide variety of electrical equipment, including: Foundry equipment (ARC and induction furnaces and casting machines) Machining equipment CNC machine tools Material handling equipment. Perform all service in compliance with applicable codes, including NEC and OSHA. May instruct and assign work to other Electricians. MetalTek International, Wisconsin Centrifugal Division, is conveniently located about 2 miles Southeast of I-94 in Waukesha, WI. We offer a comprehensive benefits package including: Health Insurance, Dental Insurance, Vision Insurance, Disability and Life Insurance, Paid Vacation, Educational Benefits, 401(k) Match / Profit Sharing, Employee Assistance Program (EAP). Requirements Qualifications include: Requires completed electrician's apprenticeship or similar experience. Experience as an industrial electrician a plus. Experience in installation and troubleshooting of relay and PLC, controlled equipment. Experience in programming of PLC's a plus. Requires thorough knowledge of applicable codes. Knowledge of DC motors and drives, AC motors and variable frequency drives, Servo. Experience working with high voltages greater than 480v a plus. Demonstrated ingenuity and problem solving ability. Ability to work in a team environment with minimal supervision. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $28.39 - $42.59/hour

* Perform radiographic operations including selection of appropriate techniques, positioning of materials, exposure of film, etc. to identify and assess defects in castings and weldments. * Perform all darkroom procedures to develop film. Interpretation of film results to determine whether parts pass or fail inspection based on knowledge of defect seriousness, codes, standards and customer specifications. Prepare necessary documentation of inspection process. * Move parts by hand and using forklifts, hoists and other lifting equipment, to facilitate inspection. * Review new customer orders to help determine proper processing through X-Ray operations. * Obtain certification(s) and perform or assist in other NDT disciplines as needed. Requirements * High School diploma or GED and post High School education in NDT or a technical field is preferred. * Certification to RT Level II, to SNT-TC-1A NAS-410, MIL-STD-2132, Navsea Tech Pub. 010/271 * Able to follow written and verbal instruction with minimal supervision. * Ability to be certified as Trustworthy and Reliable, including an FBI background check. * Strong work ethic, excellent verbal and written skills. High attention to detail and team player. * Good Knowledge of Microsoft Office Programs (Office, Excel, PowerPoint). * High technical and mechanical aptitude. * Able to lift and carry 50 lbs. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $26.20 - $39.32/hour

We have an opportunity for a Manufacturing Engineer to create manufacturing routings, develop process improvements and direct projects in support of the manufacture of a wide variety of parts and assemblies. This position also plays important roles in shop floor and supplier problem solving as well as in our continuous improvement efforts. Requirements Candidates should possess an education in mechanical/industrial engineering (preferably a bachelor's degree). Experience in a manufacturing environment is a plus. Excellent communication skills, project management and computer skills are essential. Demonstrated ability to work efficiently in a fast paced environment where schedule demands and requirements are frequently changing. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $74,144 - $111,218/year

Full-time Description Read and follow work instructions. Staging and unstaging. Routine checks of viscosity. Slurry maintenance as directed. Loading and unloading production hangers on and off the robot system. Inputting instructions into the computer. Troubleshoot typical robotic situations. Maintenance as required; filters, cleaning floor and equipment. Work with Production Control and Engineering to maintain product flow. Operate electric material lift. Requirements Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace

ELIGIBLE FOR $1,500 HIRING BONUS! * Set up, adjust and operate various sizes and types of engine lathes, pullbores, trepan and push boring machines. Operate various machines simultaneously. * Determine set ups and set up to insure concentricity to very close tolerance over considerable lengths. * Select speeds, feeds, and tooling. Determine sequence of operations to accomplish required dimensional and finish requirements. Improvise and grind tooling to meet varying materials and operating conditions. * Make or assist other machinists in set ups. * Adjust equipment as needed based on unusual sound, off standard or usual cutting problems. Check own work. May assist in development of tooling for special purposes. * Perform machine clean-outs as needed to facilitate production. * Pay will be determined based on candidate skills and abilities. Requirements * Able to work from blueprints and specifications. * Solid shop math background. * Experience with a variety of precision measuring instruments. * General knowledge of machining practices and set ups. * 1-3 years machining experience. * Familiar with use of crane and other lifting devices. * Able to lift and carry 50 lbs. Equal Opportunity Employer, including Veterans and Individuals with DisabilitiesDrug Free Workplace Salary Description $26.00 - $36.09/hour

Full-time Description Perform analyses according to established methods including operation of analytical equipment, calibration checks, calibration adjustment, recording and reporting results, and release of product and parts. Perform a variety of lab preparation, testing, and support activities, including: Sample receiving (identify test requirements and enter specimen into tracking system) Specimen preparation (abrasive cutting, turning, milling, grinding, CNC operation, etc.) Mechanical testing (hardness, tensile, rupture, impact, etc.) Metallographic preparation and evaluation Chemical analysis Maintain quality system compliance (calibration checks, self-audits, etc.) Perform maintenance and troubleshooting on lab equipment. Review industry and customer specifications and help develop, write or update procedures. Rotate hours as needed to support production or department needs. Daily or weekend O.T. may be required. Requirements Strong mechanical, math, and writing ability. Strong communication skills. Ability to work and learn independently with minimal supervision. Capable of mistake-free work in a fast-paced work environment. Computer skills are required (working with Microsoft Windows-based systems, creating spreadsheets for calculations, entering and reviewing data in databases). Minimum of high school education in math and science (chemistry, physics, general) is required. Additional technical classes or associates degree an asset. Demonstrated excellent attendance Experience operating and maintaining chemical and/or physical testing equipment (microscopes, tensile testing, spectrometers, etc.) is preferred. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace Salary Description $24.06 - $36.09/hour

Full-time Description Plan and perform operations to diagnose and repair equipment throughout the plant including maintenance of various systems (e.g. hydraulic, air, gas, water, etc.). Perform preventative maintenance as required. PRINCIPAL DUTIES AND RESPONSIBILITIES: 1. Trouble-shoot equipment, machine and system problems, diagnosing the problem and communicating anticipated repairs including time and cost estimates to operating department. 2. Working from hydraulic, structural or electrical drawings or specifications, perform repair and rebuilding operations on complicated equipment, machines and systems. Includes disassembly, inspection, repair and replacement of parts, fitting of bearings and bushings, alignment, etc. Use precision measuring equipment as required. 3. Plan and perform operations to rig and move machines and equipment. Position, align, level and secure to foundation. 4. Perform operations to maintain hydraulic, air, gas, water and ventilation systems, power transmission equipment, overhead cranes and hoists. Perform other general maintenance functions related to repair and maintenance of buildings, machines and equipment. 5. Perform preventive maintenance on assigned equipment and machines. 6. Set up and operate metal working equipment to fabricate miscellaneous parts and equipment, primarily from sheet metal and other metal stock. Includes use of sheet metal roll, rake, and iron working equipment to form metal as needed. Complete and maintain necessary certifications. 7. Perform mechanical installations and maintenance involving alignment of machines, fitting of bearings, inspection, diagnosis and repair of hoists, casting machines, shot blasters, environmental equipment and other plant equipment and machines as needed. 8. Plan, lay out and set up own work based on knowledge of welding, metal working and mechanical maintenance methods and techniques. Work from sketches, drawings, schematics, specifications or verbal instructions determine necessary materials, tools, equipment and equipment settings to perform needed maintenance or fabrication. Requirements Successful trade or vocational school completion or equivalent industrial experience Ability to read blueprints and use measuring equipment and devices, fabrication experience Automation and/or PLC experience (preferred) Ability to demonstrate strict compliance to safety standards Able to work without supervision Excellent written and verbal communication skills

Candidate will be able to count number of pieces on all incoming & outgoing products and verify paperwork. Loading & unloading all incoming/outgoing products on trucks. Pack & band all outgoing products according to procedures & verbal instructions. Knowledgeable of shipping procedures and paperwork, including computer entry. Coordinates deliveries with trucking vendors. Requirements * Flexibility of working hours; forklift operation required. * Heavy lifting required. * Applicants require the ability to read and write, add and subtract whole numbers and to follow instructions. * Strong verbal and written communication skills. * Customer service mind-set. * Basic computer skills.

Full-time Description The opportunity to be responsible for all aspects of serving and advocating for the customer in achieving their requirements through leadership and managing all functions within Wax, Shell, Rough & Final Finish, Foundry, Shipping, and Maintenance. To deliver the business plan objectives in a safe, cost effective and continuously improving manner. This position is a member of and will work directly with the division management team and is expected to be a dynamic leader contributing to all areas of plant management. Provide direction and leadership to the department supervisors to make them successful in meeting department budgets and safety goals. Requirements Puts safety first every day, takes responsibility to make and keep commitments, is personally invested to deliver MORE to all customers, and celebrates the success of the team. Bachelor of Science degree in metallurgy, materials sciences, engineering or related discipline is preferred. Minimum of 7 years of production experience in a leadership position with a strong understanding of foundry and metals manufacturing processes such as: investment casting wax and shelling, induction melting, pouring, finishing, and high alloy ferrous, nickel, and cobalt based alloy background strongly desired. The ideal candidate will have a dynamic, results-oriented, metrics-driven, decisive, and disciplined leadership style that will enable the creation of a culture of accountability. Strong knowledge and experience leading improvement initiatives, six sigma problem solving techniques, root cause analysis and related is preferred.

ESSENTIAL JOB FUNCTIONS Perform basic welding processes: operate the semi-automatic welder machine and wire feeder; visually identify good and bad welds. Use and follow mini process sheet; Complete and maintain all required paperwork and ensure proper paperwork follows parts. Work from blueprints: recognize welding views, welding symbols, read and interpret dimensions, beveling, welding, and interpret a Bill of Material (BOM) or component drawings (i.e. fabrication drawing). Operate small hand and power tools including grinders, cranes and hoists, powered hand truck, and use precision measuring devices. Perform self-inspection, operate, perform basic hook-up and riggings, use of chains and slings for a job hoist. Use basic measuring equipment including tape measure (standard and metric), square, fillet weld gage, and all other related measuring equipment; Read and use a standard and metric conversion chart. Identify and use a wire brush, pliers, wire cutter, wrenches, c-clamp, nozzle reamer, weld ID hammer, scraper, magnetic drill and other related hand tools. Identify and use grinders (including a pedestal grinder), and other related power tools. Identify metal type from a blueprint, schematic or Bill of Material. Pre-heating and post-heating: knowledge of torches, temp sticks, strikers and heat absorbent blankets. Ensure parts and materials are properly identified. Participate in random quality inspections to meet ISO standards. Maintain departmental housekeeping. Wear all appropriate Personal Protective Equipment (P.P.E.) required, by company policy, for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Perform job functions in a safe manner. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention and/or correct those you can. JOB REQUIREMENTS/WORKING CONDITIONS High School Diploma or GED preferred. Welding experience required. Must be able to read tape measure and blueprints Must be able to read and interpret routine welding and fabrication drawings; use and interpret measuring devices such as rule, scale, square, protractor; ability to use and understand fractional, decimal and metric measuring methods. Must be capable of lifting a maximum of 50 pounds and carry up to 100 feet. Normal shop environment; willing to work any shift and overtime. Must be able to work independently and be self-motivated. Travel may be required for training purposes. Safety glasses, safety shoes, hearing protection and other P.P.E. are required. Safety policies must be adhered to.

Full-time Description Step into a role where metallurgy meets innovation. We are a technically advanced foundry specializing in centrifugal casting, producing high-performance tubular and ring-shaped components for demanding industries. As a Metallurgical Engineer, you'll be at the forefront of process development, customer collaboration, and technical problem-solving - shaping the future of our products and our technology. Responsibilities: Engineer the Process: Develop and optimize metallurgical practices for centrifugal casting, from melt preparation to solidification control driving final properties and part performance. Collaborate with Customers: Translate technical requirements into solutions, provide metallurgical expertise and build strong partnerships. Drive innovation: Investigate alloy behavior, microstructure, and mechanical performance to push the boundaries of casting technology. Solve Challenges: Work side-by-side with production teams to troubleshoot issues and implement improvements that make our processes better, faster and cheaper. Lead Documentation: Prepare technical reports, specifications, and presentations that influence leadership and customers. Champion Improvement: Advance efficiency in melting, casting and heat treatment operations. Requirements Qualifications: Bachelor's in metallurgical engineering, Materials Science, or related field. Advanced degree preferred. 2+ years of foundry or casting industry experience preferred; centrifugal casting expertise and AOD experience are highly desirable. Strong knowledge of stainless steel, nickel, cobalt, and/or copper-based alloys. Experience with heat treatment, microstructure analysis, and mechanical testing. Demonstrated ability to lead projects and collaborate across departments. Excellent written and oral communication skills, with the ability to engage directly with customers on technical matters. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace Salary Description $74,144 - $111,218/year

* Work from written or verbal instruction, drawings, process sheets, route cards and knowledge of production operations to anticipate department needs and operate pallet jack to move materials, parts, equipment and castings as needed to facilitate production. * Perform application of visible and/or fluorescent inspection to identify defects. * Perform magnetic particle processing including pre-cleaning, post cleaning and demagnetizing of castings according to established procedures. * Perform cosmetic and investigative grinding as needed for test preparation and to determine seriousness of defects. Perform white light visual inspection to determine whether parts pass or fail inspection based on knowledge of defect seriousness and industry codes, standards, and customer specifications. * Perform chemical surface treatment (etching) to prepare castings for inspection when required by specification and/or work instruction. Responsible for tank maintenance associated with etching chemical treatment. * Perform grit blast using various blast equipment and media as a pre-inspection surface preparation and post-inspection cleaning. * Operate overhead cranes, hoists and other lifting equipment as needed to move work pieces and facilitate inspection. * Maintain accurate records regarding heat numbers and operations, including use of computerized record keeping. * Initiate change requests for process changes and adjustments to standards. * Maintain Level I certification in Liquid Penetrant and/or Radiographic Inspection. The individual will be expected to complete and successfully pass the required certification test per the guidelines SNT-TC-1A of the American Society for Non-Destructive Testing for level I and NAS-STD-410, Level 1. * Participate in department work groups. Requirements * Ability to obtain Level I Liquid Penetrant and/or Radiographic inspection certification. * Ability to follow written and verbal instruction with minimal supervision. * Ability to lift and carry 50 lbs. * High School diploma or equivalent required, NDT diploma/certificate preferred. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace

Penetrant/magnetic particle inspect castings as required by customer or military specifications per the purchase order, shop card, or blueprint. Accept/reject castings according to specifications as required. Maintain the penetrant/magnetic particle inspection area, inspection booths, and other equipment as necessary. Reports to Quality Manager with problems with non-conforming material. Assist in other Quality functions as required. Maintain accurate logs of all inspections performed and process logs. Work in other areas as required. Requirements High school education or equivalent experience. Strong mathematical, measurement and analytical skills. Able to work closely with others. Certified per SNT-TC-1A Level II by a qualified Level III. Up to and including three months for an individual with the specified trade knowledge or education to learn the job duties involved, perform the work and attain the quality standards. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Drug Free Workplace