Metron Technology jobs

The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Dayton, VA Job Type: Full Time Shift(s) Available: 2nd Compensation: $20.65/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities HACCP Checks Work closely with USDA Assist with department set ups Ensure all safety practices are being followed Responsible for reconditioning station Complete HACCP paperwork Work on production line as needed Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read/write/speak English Preferred Qualifications Previous Cargill experience Previous poultry experience Production experience Work history in the last 12 months Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($31,905.34 - $59,252.77) Target Bonus: 5.0% Req ID: 27240 Long Description If you like being challenged, want to be a part of something special, and desire being part of an exciting team that is always striving to be at the forefront of our industry, then we're looking for you - a driven and motivated new team member. We are currently seeking to hire a Production Assembly Associate at our location in Michigan City, Indiana. Position Summary Responsible for assembling purchased parts and the various pieces that go together to form a finished product. The assembly associate will use various hand tools and power tools, in conjunction with their hands, to complete the job. Tools: Hand tools; screwdrivers, wrenches / sockets, wire strippers / crimpers, tape measure. Power Tools; drills, grinders, belt sander, band saw, and power riveter Responsibilities · Prepare work to be accomplished by studying assembly instructions, blueprint/wiring specifications, and bills of material; gather parts, subassemblies, tools, and materials. · Install parts and subassemblies by assembly drawings/on job training. · Assemble components by examining connections for correct and proper fit; fastening parts and subassemblies. · Resolve assembly problems: notify line supervisor to obtain additional resources/direction. · May train co-workers in production assembly. · May be required to complete production documentation. · Required to maintain a safe and clean working environment by complying with Vanair procedures, rules, and regulations. Skills · Ability to read blueprints, wiring schematics, assembly drawings · Able to read a tape measure · Good mechanical aptitude · Ability to work in a fast-paced environment Great Work Environment · Pleasant, clean, well-lighted environment · Family-oriented · First-of-the-month Friday company-supplied lunches · Company Parties including Christmas Party, Santa for the Kids, Summer Family Picnic, and more Local charity events Job Requirements Must have at least one year of hand and power tool experience Manufacuring experience is a plus Must be able to lift 50 pounds unassisted Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Employment Status: Salary Full-Time Function: Supply Management/Purchasing Pay Grade and Range: USXX - Grade USXX Salaried 57 (Min $74,693 - Mid $106,576$74,603.39 - $138,549.16) Bonus Plan: OIP Target Bonus: 5.0 Hiring Manager: Paul Sittig Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Position Summary Vanair , a Lincoln Electric company, has been an industry leader since 1972, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. Vanair is seeking an experienced Sourcing Specialist who can contribute to a growing, entrepreneurial customer-focused company. The Sourcing Specialist ensures new product development and cost reduction projects sourcing activities are completed on time. This role requires effective coordination with multiple internal teams and external partners to optimize costs, select the most suitable suppliers, produce quality products, and ensure that all signed agreements protect the best interests of Vanair. The Sourcing Specialist also negotiates with suppliers for optimal cost and inventory replenishment strategies and collaborates with the team on meeting key metrics and continually monitoring and improving supplier performance. The successful candidate will have manufacturing experience and a strong understanding of supply chain management concepts. Responsibilities Evaluate suppliers' proposals, costs, and quality, as well as oversee purchasing performance based on service and availability. Collaborate with Engineering on new product developments and provide timely follow-through on Engineering Change Notifications (ECN). Collate purchase orders and purchase requisitions in order to order materials, goods and supplies, including RFQ's (Request for Quotes) and requisitions. Resolve issues as they arise with non-supplied, under orders, over orders quality and damaged goods through problem resolution. Collaborate with the suppliers, engineering, planning, production, and inventory control daily on issues with non-supplied, under orders, over orders quality and damaged goods, resolving issues as they arise. Perform regular reviews of inventory planning parameters. Maintain and update supplier database for pricing, lead-times, country of origin, HST codes and contact information. Job Qualifications & Skills Bachelor's Degree in Supply Chain, Business, or a related field and/or 8 to 10 years purchasing experience in a manufacturing environment. Strong negotiating and decision-making skills. Comprehensive understanding of MS Excel, MS Word, and industry standard ERP/MRP platforms. Strong organizational skills and impeccable attention to detail. Strong multi-tasking skills and problem-solving abilities. Excellent communication and customer service. Ability to work well with a team and collaborate cross-functionally. Able to thrive in a high-stress and fast-paced environment. Lean experience/certification a plus. Great Work Environment Pleasant, clean, well-lighted environment. Family-oriented. First-of-the-month Friday company-supplied lunches. Company Parties including Christmas Party, Santa for the Kids, Summer. Family Picnic, and more. Local charity events. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Values & Innovation At Under Armour, we are committed to empowering those who strive for more, and the company's values - Act Sustainably, Celebrate the Wins, Fight on Together, Love Athletes and Stand for Equality - serve as both a roadmap for our teams and the qualities expected of every teammate. Our Values define and unite us, the beliefs that are the red thread that connects everyone at Under Armour. Our values are rallying cries, reminding us why we're here, and fueling everything we do. Our pursuit of better begins with innovation and with our team's mission of being the best. With us, you get the freedom to go further - no matter your role. That means developing, delivering, and selling the state-of-the-art products and digital tools that make top performers even better. Purpose of Role Step up. Lead the floor As a Sales Keyholder, you're the right hand to our store leaders - driving sales, coaching teammates, and keeping energy high. It's the perfect first step into leadership for someone whose ready to take charge, inspire others, and make every shift count. Your Impact We count on our Sales Keyholders to: Ensure all teammates provide great customer service Lead a selling culture and enhance the customer experience Recognize and reward performance Coach, train, and support teammates Manage loss prevention, safety, and audit expectations and results Ensure the store is neat, clean, and well-stocked Open and close the store when necessary Support in driving sales and retail/omni KPI target achievement Act as the leader on duty and consistently models the brand's Athlete service standards and selling behaviors Provide in-depth information related to a wide portfolio of technical products Partner with rest of store leadership in maintaining standards covering merchandise and floor sets Evaluate store sales and payroll goals using payroll reports and tools; make scheduling adjustments to meet business needs. Build Athlete loyalty through in-store experience, using various available applications Effectively communicate with athletes, teammates, and leadership Assume Stock Keyholder responsibilities as necessary Perform other tasks as assigned by management Requirements To be considered for this role, you must meet these minimum requirements: At least 18 years old High school degree or equivalent 1+ year of retail/customer service experience Local language fluency required; basic English is a plus Available to work a flexible schedule; including evenings, weekends, and holidays Knowledgeable of store operations, visual merchandising, stockroom, risk management & safety Moderate knowledge of industry/retail operations and applying this knowledge to create solutions Advanced selling experience and comprehensive industry understanding Ability to bend, squat, reach, climb a ladder and stand for extended periods of time with or without reasonable accommodation Comfortable with or willingness to learn technology (such as hand-held and mobile devices) Strong communication skills Can stand, walk, bend and lift cartons weighing up to 25 lbs./ 12kgs during each work shift with or without accommodation Benefits & Perks Perks & benefits our Part-Time Associates receive: Generous employee discount Ability to participate in special contests with the opportunity to win merchandise and other exclusive prizes Work-Life Assistance Program to support health, personal, family or work-related challenges High-energy environment, working alongside people who appreciate the power of a team Opportunities for professional development and advancement $18.50-$20.80 USD Our Commitment to Equal Opportunity At Under Armour, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion or belief, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, family or paternal status and any other characteristic protected by applicable law. Under Armour seeks to recruit, develop and retain the most talented people representing a wide variety of backgrounds and perspectives. If a reasonable accommodation is needed to participate in the job application or interview process, please contact our Human Resources team via candidateaccommodations@underarmour.com.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($36,103.41 - $67,049.19) Target Bonus: 5.0% Req ID: 27239 Long Description Are you interested in working with custom automotive builds? Do you have mechanical experience you want to put to the test? Are you looking for an exciting & rewarding career with a global industry leader? Would you like to earn a $2,000 sign on bonus*? Vanair, a Lincoln Electric company, has been an industry leader for 52 years, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. As an experienced Truck Upfitter/ Equipment Installer, you will deliver outstanding products to customers who have trusted our brands for decades.If you like being challenged, want to be a part of the company's expansion, and are looking for personal development and growth, then we're looking for you HERE'S A GLIMPSE OF WHAT YOU'LL BE DOING The Core Description - Youwill install various types of truck bodies, Mobile Power Systems , lighting packages, graphics, and other equipment to complete new custom builds for the work truck industry. You will work alongside some of the best in the business and will drive business growth. The Day-to-Day - Work in a clean environment building brand new trucks utilizing common automotive shop tools to build custom solutions for our broad range of customers. This requires mechanical aptitude, physical strength, the continuous use of hands including grasping, pushing, and pulling, as well as maneuvering inside, around, and underneath vehicles regularly. Following Best Practices - Strictly adhere to quality standards, frequently read and follow work instructions and production specifications (e.g., dials or gauges, measuring tapes, blueprints, and customer supplied specs). Understand, follow, and enforce all risk reduction procedures including wearing specified protective clothing and safety equipment where required. Pay: will correspond with years of experience Benefits: comprehensive benefits package Sign On Bonus*: $1,000 after 6 months of employment and an additional $1,000 after 12 months of employment. Must be an active employee in good standing to receive payment. Applicable taxes apply. Job Requirements Tool Experience: Minimum of 2 years of experience using hand and power tools, preferably in automotive applications. Vehicle Experience: At least 2 years of experience working on vehicles, either professionally or as a hobby. Truck Experience: Experience working on medium to heavy-duty trucks is preferred. At least 2 years of experience working on vehicles, either professionally or as a hobby is required. Tools Provided: Must be willing to supply all necessary tools. Physical Requirements: Must be able to lift 50 lbs unassisted on a regular basis. Must be able to lift up to 75 lbs occasionally without assistance. Must be able to stand for 6+ hours. Must be able to bend, twist, turn, and squat regularly while lifting 50 lbs. Familiarity with vehicle electrical systems, hydraulics, and mechanical components is a plus. Ability to read and interpret schematics, wiring diagrams, and technical manuals (or ability to learn within 30 days of hire). Basic fabrication skills (cutting, grinding, drilling, welding) are a plus. Experience installing toolboxes, racks, liftgates, lighting systems, PTOs, and other aftermarket equipment is preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: USXX - Grade USXX Salaried 57 (Min $74,603 - Mid $106,576$74,603.39 - $138,549.16) Bonus Plan: 8% AIP Target Bonus: 8.0 Hiring Manager: Kai Justice Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Overview Vanair , a Lincoln Electric company, has been an industry leader since 1972, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. If you like being challenged, want to be a part of something special, and desire being part of an exciting team that is always striving to be at the forefront of our industry, then we're looking for you - a driven and motivated new team member. We are currently seeking to hire a Mechanical Engineer at our location in Michigan City, Indiana. Job Summary As a member of the Engineering staff, the Mechanical Design Engineer will design, test and develop, and maintain products, options, and accessories following company and industry standards. Primary Duties and Responsibilities Design and specify product component parts, subassemblies, and complete assemblies (New Product Development). Assist R&D personnel with set-up and laboratory testing to validate product performance. Analyze and interpret test data and make product revisions as necessary to comply with performance and safety requirements. Read, create, and maintain engineering documents such as exploded part assemblies, basic wiring and electrical schematics, and fabrication/machined detail drawings. Use the ECN (Engineering Change Notice) process to effectively and efficiently manage change aimed toward product improvement. Formulate product design specifications and update as required. Support assembly line by analyzing and solving problems or obstacles that occur during production. Help train production line and service departments for new builds and product improvements. Productively function in a fast-paced Engineering department that works intimately with manufacturing plant, sales personnel, and Service/Training team. Occasionally travel to assist with new applications, diagnostics, or trade shows. Assist with maintaining applications/equipment and how they integrate with evolving model year truck manufacturer changes. Other duties as assigned. Up to 50% travel to customer sites expected throughout North America Job Qualifications and Skills Mechanical Engineering, Technologist or related degree preferred, but will consider relevant work experience in lieu of a degree. Minimum 3 years experience in design, troubleshooting, and analysis of pneumatic, electrical, mechanical, and hydraulic controls and systems. Experience with rotary screw compressors. Good aptitude with hydraulic and mechanical driven equipment. Experience with automotive power train - work trucks, large equipment, and PTO proficiency is a plus. 2D / 3D CAD drawing environment experience (AutoCAD and Inventor preferred). Must be able to juggle priorities effectively. Must have a positive attitude and function well with group-oriented tasks. Experience with a document control system such as a Vault is a plus. Great Work Environment Pleasant, clean, well-lighted environment Family-oriented First-of-the-month Friday company-supplied lunches Company Parties including Christmas Party, Santa for the Kids, Summer Family Picnic, and more Local charity events Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

JOIN TEAM TRILOGY: At Trilogy, you'll experience a caring, supportive community that values each team member. We prioritize meaningful relationships, genuine teamwork, and continuous growth. With the stability of long-term care, competitive pay, and exceptional benefits, Trilogy offers a work environment where you're supported, appreciated, and empowered to thrive in your career. If you're ready to join a team committed to your success, Trilogy is where you belong and thrive! WHAT WE'RE LOOKING FOR: The Qualified (Certified) Medication Aide (QMA or CMA) assists with administering medications to residents as directed by the physician, nurse supervisor, and Director of Nursing (DON). Additionally, this role assists residents with activities of daily living. Key Responsibilities The Qualified (Certified) Medication Aide sets up, administers, and records certain prescribed medications for residents in the facility under the supervision of a licensed nurse and as allowed by State regulatory agencies. Practice the five rights of medication administration within the scope of your role. Assist residents with activities of daily living as needed. Properly label, store, receive and destroy medication per company policy. Perform medication charting as directed by the Nurse Supervisor/Charge Nurse. Qualifications Certified as a Qualified Medication Aide (QMA) or Certified Medication Aide (CMA) by the state and maintain a Certified Nursing Assistant (CNA) Certification in good standing with the state. 0-1 years of relevant experience preferred WHERE YOU'LL WORK : Location: US-IN-Elkhart LET'S TALK ABOUT BENEFITS: Our comprehensive Thrive benefits program focuses on your well-being, offering support for personal wellness, financial stability, career growth, and meaningful connections. This list includes some of the key benefits, though additional options are available. Medical, Dental, Vision Coverage - Includes free Virtual Doctor Visits, with coverage starting in your first 30 days. Get Paid Weekly + Quarterly Increases - Enjoy weekly pay and regular quarterly wage increases. Spending & Retirement Accounts - HSA with company match, Dependent Care, LSA, and 401(k) with company match. PTO + Paid Parental Leave - Paid time off and fully paid parental leave for new parents. Inclusive Care - No-cost LGBTQIA+ support and gender-affirming care coordination. Tuition & Student Loan Assistance - Financial support for education, certifications, and student loan repayment. GET IN TOUCH: Demond ************** APPLY NOW: Since our founding in 1997, Trilogy has been dedicated to making long-term care better for our residents and more rewarding for our team members. We're proud to be recognized as one of Fortune's Best Places to Work in Aging Services, a certified Great Place to Work, and one of Glassdoor's Top 100 Best Companies to Work. At Trilogy, we embrace who you are, help you achieve your full potential, and make working hard feel fulfilling. As an equal opportunity employer, we are committed to diversity and inclusion, and we prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. NOTICE TO ALL APPLICANTS (WI, IN, OH, MI & KY): for this type of employment, state law requires a criminal record check as a condition of employment.

New Hire Incentive Bonus! UniFirst's Norfolk, VA location is now offering an incentive bonus for $2,000 new hires. The following guidelines must be met to be eligible: New hire must reach 90 days of employment to receive the full incentive bonus. New hire must abide by UniFirst's 90-Day Probationary Period. This includes meeting UniFirst's attendance and performance policy. New hire must not have been previously employed by UniFirst. Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Employment Status: Salary Full-Time Function: Manufacturing Pay Grade and Range: USXX - Grade USXX Salaried 55 (Min $55,952 - Mid $79,932$55,952.54 - $103,911.87) Bonus Plan: 5%OIP Target Bonus: 5.0 Hiring Manager: Paul Sittig Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) About Vanair , a Lincoln Electric company, has been an industry leader since 1972, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. If you like being challenged, want to be a part of something special, and desire being part of an exciting team that is always striving to be at the forefront of our industry, then we're looking for you - a driven and motivated new team member. Position Summary Vanair is seeking an experienced Senior Purchasing Analyst (Buyer/Planner) who can contribute to a growing, entrepreneurial customer-focused company. The Purchasing Analyst ensures that manufacturing has an uninterrupted supply of products and services to meet daily production goals at the most competitive costs. Analysts negotiate with suppliers for optimal cost and inventory replenishment strategies. They also collaborate with the team on meeting key metrics and continually monitoring and improving supplier performance. The successful candidate will have manufacturing experience and a strong understanding of supply chain management concepts. Responsibilities Evaluate suppliers' proposals, costs, and quality, as well as oversee purchasing performance based on service and availability. Strive to minimize expenses and increase company profitability, develop detailed purchasing reports, and recommend changes to the acquisitions processes as needed. Purchasing analysts also write orders and review bid proposals based on project requirements. Collaborate with Engineering on new product developments and provide timely follow through on Engineering Change Notifications (ECN). Collate purchase orders and purchase requisitions in order to order materials, goods and supplies, including RFQ's (Request for Quotes) and requisitions. Resolve issues as they arise with non-supplied, under orders, over orders quality and damaged goods through problem resolution. Collaborates with the suppliers, engineering, planning, production, and inventory control daily on issues with non-supplied, under orders, over orders quality and damaged goods, resolving issues as they arise. Perform regular reviews of inventory planning parameters. Maintain and update supplier database for pricing, lead-times, country of origin, HST codes and contact information. Job Qualifications & Skills Bachelor's Degree in Supply Chain, Business, or a related field and/or 5 years minimum purchasing experience in a manufacturing environment. Strong negotiating and decision-making skills. Comprehensive understanding of MS Excel, MS Word, and industry standard ERP/MRP platforms. Strong organizational skills and impeccable attention to detail. Strong multi-tasking skills and problem-solving abilities. Excellent communication and customer service. Ability to work well with a team and collaborate cross-functionally. Able to thrive in a high-stress and fast-paced environment. Lean experience/certification a plus. Great Work Environment Pleasant, clean, well-lighted environment. Family-oriented. First-of-the-month Friday company-supplied lunches. Company Parties including Christmas Party, Santa for the Kids, Summer Family Picnic, and more. Local charity events. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: USXX - Grade USXX Salaried 57($74,603.39 - $138,549.16) Min $4,603 - Mid $106,576 Bonus Plan:8% Req ID: 27302 Job Summary As a member of the Engineering staff, the Electrical Engineer is responsible for the design of new products, prototypes, and carries through to full production. This Engineer will also be responsible for technical support of some mature products currently in production. This includes Code Changes, maintenance of Bills of Material, electrical schematics and drawings, assistance in troubleshooting and new installation verifications, design reviews, simple mechanical designs, documentation packages, pre-production builds and transfers to production. Primary Duties and Responsibilities Provides technical direction, serves as a point of contact or business liaison, prepares briefings for senior management and assists in problem resolution specific to the program / project. Designs and tests electrical and electronic products or systems. Designs and maintains electrical control systems and components to required specifications, focusing on safety, reliability, and cost. Creates wiring schematics, electrical harnessing, and Bills of Material relevant to electrical systems. Sizes and integrates overload and short circuit protections based on current applicable safety regulations, such as NEC, UL, and SAE. Writes manufacture and test procedures and reports. Participates in project teams and all activities related to the development and maintenance of products. Collaborates within the Engineering team to ensure design constraints are met, tested, and delivered on time and within budget. Provides technical support to Sales and Marketing for bids and proposals. Productively function in a fast-paced Engineering department that works intimately with manufacturing plant. Works cross-functionally with all other departments regarding electric controls and systems. Must be able to juggle priorities effectively. Must be able to transition from hands-on R&D or troubleshooting environment back to desk / office tasks effectively. Function well with group-oriented tasks, as well as solitary projects. Other duties as assigned. Job Qualifications and Skills Bachelor's Degree (BSEE or BSECET) from an accredited college or university. Minimum 2 years' experience in a job relevant to degreed field. Experience in design, repair, and analysis of electrical systems. Experience with CAN communication (SAE J1939 preferred). Must have exposure to electrical engineering principles and methodologies. Demonstrated 2D CAD system proficiency (preferably AutoCAD). Exposure to C, C++, and / or other programming languages. Data logging and sensor interface experience. Self-motivated, driven and goal-oriented. Possess strong verbal and written communication skills. Preferred Knowledge of PID controllers CAN communication experience Vehicle speed control experience Plusses Knowledge of compressor systems Advanced degree (MBA / MSEE) Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

As a global marketing experience company, Quad's goal is to help our clients win every day. We use our data-driven integrated marketing and manufacturing platform to streamline solutions for our clients, reduce friction and enhance their marketing spend effectiveness. We've built a rich legacy by believing in our people, allowing them to act like owners and to take charge of their own success. Whether an operator, sales rep, a graphic artist or a clinician, we're all driven to perform at our best- for ourselves and our clients. At our core, we're a company that believes we can always create a better way. Quad is currently seeking a First Pressman for our Winchester, VA location. This position will set-up, operate and maintain the press and auxiliary equipment related to the press. Additionally, the First Pressman will direct the activities of the press crew, assigning tasks during downtime and make-ready periods. Job Duties include, but are not limited to: Make-ready and operate press based upon written instructions provided. Establish and maintain color and/or fold and mechanical quality to BPC standards. Continuously monitor product for quality and approve or reject. Direct and coordinate activities of assigned crew members. Perform assigned make-ready duties. Complete required general maintenance and lubrication assignments. Complete required documentation, electronic and paper, for assigned job. Perform duties of other Print Service manufacturing positions as needed, following requisite training. Provide training for employees so the crew members can provide coverage for each other and/or prepare them for future positions. Follow all safety policies and regulations, report any potential hazards, near-misses, or accidents immediately. Perform other duties as assigned. Required Qualifications: Ability to work irregular schedules, including rotating day/night shifts Ability to maintain close attention to detail for extended time periods Strong organizational abilities Ability to work overtime as mandated by production needs Ability to work independently as well as with a crew/team Ability to work in a fast-paced environment and meet deadlines under pressure Essential Functions of this job include the following: the ability to lift 10-15 pounds continuously, the ability to lift up to 70 pounds occasionally, stand long hours, use hand and wrists continuously in a controlled movement, receive and follow instructions and use vision in order to identify defects. Ability to work 12 hour shifts 6am-6pm or 6pm-6am, which may include days, nights, weekends and overtime. High School Diploma or GED preferred. We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more. Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging - a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories. Drug-Free Workplace

Job Title: Electrical Field Test Technician (NETA III/IV or NICET Equivalent) Employment Type: Full-Time, Direct Hire Travel: Approximately 25% (Regional & National Projects) Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) Elevate Your Career with ABM Electrical Power Services ABM Industries is looking for a skilled and experienced Electrical Field Test Technician to join our Electrical Power Services team. If you're a NETA Level III or IV Technician or hold NICET certification (or equivalent experience), this is your opportunity to work with a leading NETA-accredited organization that values expertise, leadership, and career advancement. As an Electrical Field Test Technician, you'll take charge of testing, troubleshooting, and commissioning power systems from low to high voltage. You'll also guide and mentor junior team members while working on complex, mission-critical projects in the field. What You'll Do Travel to client sites to inspect, test, troubleshoot, and start-up electrical systems Lead and mentor Level I and II Trainees and Assistants in technical tasks and field operations Assign work, review performance, and ensure consistent execution of testing procedures Conduct acceptance and maintenance testing for switchgear, relays, transformers, cables, and motor control centers Test and calibrate solid-state and electromechanical relays (including SEL 700G or comparable) Operate tools and software such as Enoserv RTS, Megger, and Omicron testing equipment Analyze test data, perform insulated fluid sampling, and interpret electrical performance issues Complete Job Hazard Analyses, including arc flash and shock hazard assessments Document all results in detailed field service reports Rotate on-call duties for emergency response and service Assist the sales team by providing technical expertise and recommendations Ensure compliance with NETA, NFPA70E, and ABM safety and quality standards What We're Looking For Minimum Requirements: 5+ years of experience in electrical testing and power system services Current NETA Level III or IV, or NICET equivalent certification Proven experience leading and mentoring technicians in the field Ability to manage multi-month, medium to large-scale projects Familiarity with NETA ATS/MTS Standards and NFPA70E Proficient in lockout/tagout and hazardous energy control procedures Excellent communication, leadership, and problem-solving skills Clean driving record and ability to travel nationally (up to 90%) Preferred Qualifications: Associate's degree or higher in Power Systems or related field Skilled in troubleshooting electrical faults, especially ground faults Familiarity with generator controls, protection systems, and high-voltage substations Why ABM? Competitive Compensation: Top-tier hourly pay plus overtime Career Progression: Work with the best and grow with continued support and training Comprehensive Benefits: Medical, dental, vision, 401(k), PTO, and more Team Environment: Join a collaborative crew of professionals who take pride in powering critical infrastructure Join a company that powers success-on every level. Apply now to bring your expertise to ABM Electrical Power Services. #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Field Service Management (FSM) Analyst Must Have Skills Has 3+ years as Systems Analyst focused on FSM Has utility industry experience Can gather requirements, design processes, and test systems Can support integrations (APIs, middleware, data migration) Understands mobile field service applications

Since 1995, Red Oak Technologies has been a trusted partner in the tech industry, delivering innovative talent solutions that drive progress. We specialize in quickly acquiring and efficiently matching top-tier professional talent with clients in immediate need of highly skilled contract, permanent or project management based resources. “NOTE: If selected for this position, you are required to perform ALL work onsite” Food Product Evaluator II Dublin, CA KEY RESPONSIBILITIES: •New Product Development Projects - Assist Product Development Managers by managing documentation and new food product demonstrations across multiple categories. Receive, log, label, and store food product sample submissions. Maintain inventory management system of product samples. •Plan set-up, clean-up, and assist with product evaluations/cuttings, as assigned, and participate in cuttings and evaluate the organoleptic quality of products, as required. Create and distribute demonstration reports to cross-functional team. •Execute product sample testing, as appropriate per category (ex: pH, viscosity, texture analyzer, etc.). Perform other duties, as assigned by supervisor. •Finished Product Specifications - Create, update, review and manage product files for finished product specifications in our internal specifications database system, including NLEA and ingredient statements, based on input and collaboration with supervisor, supplier, and cross-functional team members, as appropriate. Route specifications for approval. Qualifications: •Degree in Food Science, Chemical Engineering or a similar discipline preferred. •At least 3 years' experience in a lab, manufacturing, or production facility plus the education listed above. •Thorough knowledge of food manufacturing equipment, food preparation, ingredient functionality, product formulations, and sensory evaluation procedures. •Thorough understanding of food safety and microbiology. Working knowledge of packaging technology to evaluate adequacy of packaging. •Able to operate simple chemical and analytical tools and laboratory equipment (refractometer, pH meter, simple titrations, and various measuring devices.) •Excellent time management skills, sense of urgency and desire to complete all assignments on a timely basis. Travel: • Less than 10%

About The Role: The Splenda Design Intern will engage in practical design projects with a focus on learning, creativity, and building a professional portfolio while supporting the company's marketing and branding efforts. This internship will also intro the intern to the fundamentals of working in a leading CPG environment. This role could be for either the Spring or Summer. The Splenda Brand is the leader within the sweetener category with strong brand awareness, market share leadership and a growing consumer base that use Splenda every day. About Splenda: Splenda brand has brought sweetness to the world since 1992. Today, the Splenda brand is the most recognizable and iconic low-calorie sweetener brand in the world, having sold more than 100 billion yellow packets. And it's the #1 recommended brand of sweetener by healthcare professionals. The Splenda brand portfolio of products reinforces our position as a category leader, with more delicious new products to come as we help people live happier, healthier, and longer lives. Program Goals: Provide hands-on experience with fundamental design tasks. Build the intern's confidence and technical skills through guided projects. Equip the intern with a strong portfolio showcasing their creativity and practical skills. Support professional growth through mentorship and feedback. Join team brainstorming sessions and observe creative decision-making. Shadow design team members working on advanced projects for inspiration. Learn basic file preparation for print and digital applications. Desired Skills & Required Experience Currently pursuing a BS/BA in business, with an emphasis on Design. Possess strategic thinking, leadership, and teamwork skills. Heartland's culture is fast, flexible & innovative. The intern must possess these traits and be willing and able to operate with a rapid, iterative, continually learning mindset. Solution focused mindset, demonstrate ability to operate with a business ownership mindset. Collaborative attitude, work harmoniously with internal and external cross functional partners. Position is in-office based at Heartland Corporate Headquarters in Carmel, IN on the north side of Indianapolis.

About Metron Metron is an employee-owned company dedicated to delivering innovative solutions for the most challenging national security problems. For over 40 years, our principled approach to problem-solving has yielded creative solutions at the intersection of advanced mathematics, computer science, physics, and engineering. Our people are leaders in their technical fields and are passionate about solving challenging problems. We look for individuals who share this same passion and can apply their experience in real-world settings. Metron is seeking talented students to be part of our summer internship program. The successful candidate(s) will be supervised by a mentor and work in small teams led by senior technical staff members. Projects include developing and testing algorithms, creating user interface components, and writing scripts in support of large-scale defense and homeland security support systems. Interns are given the opportunity to learn from our talented staff and present their accomplishments at the end of their internship. Required Qualifications Applicant must be at least 16 years old U.S. Citizenship Desired Qualifications Pursuing a bachelor's degree in Computer Science, Math, Physics, Engineering, or related field Programming experience in Java, C++, Rust, or Python Familiarity with designing and implementing graphical user interfaces Familiarity with web development, modern collaborative software tools, data structures, and algorithms Excellent analytical skills and problem-solving ability Prior quantitative research experience Position Location: Reston, VA Metron is an Equal Employment Opportunity (EEO) employer. It is the policy of the company to provide equal employment opportunities to all qualified applicants without regard to race, color, religious, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. VEVRAA Federal Contractor