Quality Inspector jobs at Meyer Tool - 147 jobs

Will perform a variety of FPI and x-ray operations and inspections, read, interpret and understand appropriate drawings, procedures and instructions and operate all required radiography equipment. Will also perform routine maintenance on radiography and FPI equipment as needed. Will train level 1 technicians and work with the level 3 technicians to improve processes and reduce waste in the value stream. RESPONSIBILITIES: * Assist in scheduling workload of X-ray and FPI operations. * Perform cycle counts to improve efficiencies in the department. * Work with floor supervisors to help establish production routines. * Insure that travelers, routings and TMD's are being complied with throughout the department. * Operate X-ray machines and FPI booths as required. * Read and understand part drawings and specifications associated with NDT. * Learn/perform basic computer operations. * Work closely with the engineering group and weld and braze specialists. * Develop and approve X-Ray techniques for various new weld and braze designs. * Provide training to facility level I and II technicians. * Perform other duties as requested QUALIFICATIONS: High School diploma or equivalent. * Good interpersonal skills and willingness to work effectively as a participative team member. * May be required to lift up to 50 lbs. * Utilize good verbal and written communication skills. * Accurately perform basic mathematical calculations. * Have at least 2 years" experience as a Level II in Radiography and FPI.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is looking for Flight Readiness Technician Inspectors (FRTI) to support the Flight Line Quality Family based out of North Charleston, South Carolina. As an FRTI supporting Boeing 787 Fleet, qualified candidates will verify and inspect routine final component installation, as well as support system operational functional validation testing. Flight Readiness Technicians Inspectors verify and inspect rework, modification, maintenance, preflight and post-flight checks for delivery, including, supporting troubleshooting pre and post-flight checks and verification of maintenance and modification actions for delivery of aircraft. Candidates must demonstrate a commitment to aircraft safety and quality while working in a flight line environment around live aircraft. Position Responsibilities: * Performs verification and inspection of flight component installation and operational functional testing of aircraft systems. * Inspects and verifies troubleshooting of pneumatic, hydraulic, electrical and avionics systems to isolate mechanical and/or faults and documents faulty components. * Conducts inspection of pre-flight and post-flight checks and performs inspections of maintenance and modification prior to delivery. * Supports documentation of identified problems during operation and testing of deliverable products. * Verifies the accuracy of work performed and may conduct * Assists in performing system & sub-system pre-delivery inspections and aircraft maintenance inspections in preparation for delivery. * Participates in determining details of assignments to accomplish a wide range of objectives. * Plans, schedules and arranges own activities with the assistance of lead. * Inspects, documents, and creates non-conformance records with minimal assistance. * Must maintain all necessary certifications to perform the job. * Exhibits Boeing Behaviors. Basic Qualifications (Required Skills/Experience): * Must be able to work any shift including days, nights and weekends. * 1+ years of Aerospace, Fabrication, or Manufacturing experience. * 1+ years of experience in quality inspection and/or auditing. * 1+ years of flight line operations experience. * 1+ years of experience using Microsoft Office tools (Word, Excel, PowerPoint). Preferred Qualifications (Desired Skills/Experience): * 3+ years of equivalent education and/or experience strongly preferred * FAA Airframe & Power Plant license or signed FAA Form 8610-2. * 787 Program Experience. * Foreign Object Debris (FOD) risk experience. * Team Leadership (Formal/Informal) experience. * Proficient in REDARS, PSDS, and BAC specifications. * Proficient in all forms of NCR (Non-Conformance Record) and EPD (Emergent Process Document) generation (NC/NCR/RGEN/PU/SAT/SRR/PU or RGEN Revision etc.). Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Shift Work Statement: This position is for variable shift. Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation of the need. Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. summary pay range (level B): $66,000 - $78,000 summary pay range (level C): $75,600-$79,800 Applications for this position will be accepted until Feb. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Read more Shows the full job description for sighted users Apply Now Save JobRemove Job

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

Responsibilities Starting Pay: $39.75/hr. * Performs assigned inspection functions in accordance with the Company's GMM, Manufacturer's Maintenance Manual Procedures and applicable Federal Aviation Regulations to ensure that the Company aircraft, engines, appliances, and components are maintained to the prescribed standards of airworthiness and serviceability. Provides quality oversight for all maintenance activities. * Performs preliminary, in progress, hidden damage and final inspections. Performs Special and Detailed Inspections by the requesting or requiring documents. Performs Required Inspection Item (RII) and Buy Back inspections. * Performs Material Inspections of incoming aircraft components to ensure the use of legal, conforming and applicable parts and materials. * Conducts surveillance and sampling of work performed, maintenance practices and processes to ensure maintenance and documentation is accomplished according to the Spirit Airlines maintenance program. Assures the use of approved data, materials, tools, test equipment and that a high standard of workmanship is present. * Conducts final review of all maintenance documents and SETS records prior to records archival for completion, correctness, use of appropriate references to approved data. Identify and log errors into the Records Error database and generate Record Error Notices for correction. * Review aircraft logbooks for pilot and AMTs reports, deferred maintenance and accomplishment of correct airworthiness release procedures. * Ensure Spirit processes, i.e. Calibrated Tools, Shelf-Life Items, quarantine and scrapped parts, in various locations are accomplished in accordance with company manuals. * As designated and assigned by the Manager Quality Control, accomplish safety and housekeeping checks of hangar and/or line work areas. * Assist the Manager Quality Control in the on-site acceptance checks of additional aircraft to be added to the company's Ops Specs. * Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies, and procedures. * Performs as a Designated Instructor in areas and/ or subjects as qualified and approved by the Manager, Maintenance Training and the Manager Quality Control. * May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (e.g. emergencies change in workload, rush jobs or technical developments). Qualifications * A&P License is required and ability to demonstrate use of A/P within 36 months * 3 years maintenance experience on FAR part 121 certificated aircraft of 50 or more passenger aircraft * Ability to hold and maintain Required Inspection Item (RII), Airworthiness Release Authorization (ARA) and Material Inspection (MI) authorization * Knowledge of GMM, Maintenance Programs, and other related company manuals * Comprehensive understanding of Part 121 Regulations Preferred Skills/Experience: * Bachelors Degree in Aviation Management, Business or related field * Experience on Airbus A320 Fleet type aircraft * Inspection experience under Part 121 Regulations We offer a competitive salary and comprehensive benefits to our team members including medical, dental, STD, LTD, life insurance, 401(k), paid time off, travel benefits and much more. We strive to maintain a professional, yet friendly environment and promote professional and career development for our Team Members. Overview At Spirit, we live "More Fly." It's not just about getting from point A to B-it's about feeling fly while you're at it. For our Team Members, it means thinking BIG, taking action, making connections, and having a blast while doing it. From the station to the cockpit, the cabin to the computer, every day is an adventure as we redefine travel. Soar with us and enjoy travel perks that bring you closer to what matters. Join a team that empowers you to bring your full self to work, grow personally and professionally, and fuel the communities we serve. At Spirit Airlines, the sky isn't the limit-it's just the beginning! EEOC Statement Spirit Airlines is an Equal Employment Opportunity employer. All aspects of employment are governed on the basis of merit, competence and qualifications without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or any other category protected by federal, state, or local law.

Join SMF - Where Your Career Takes Shape! At SMF, we don't just offer jobs-we build careers. As part of Etnyre International, we have a 50-year legacy in high-quality metal fabrication, serving industries like construction, power generation, agriculture, and mining. Our reputation as a top-tier supplier to Fortune 500 OEMs comes from our dedicated team members, cutting-edge technology, and commitment to excellence. With 200,000+ square feet of manufacturing capabilities across two locations, we handle everything from engineering and fabrication to finishing. Our recent partnership with Etnyre International has fueled even more growth and opportunity-and we want YOU to be a part of it! 💎 What We Offer - Total Rewards Package: ✅ ANNUAL BONUS for ALL team members ✅ ANNUAL Wage Increases to reward your dedication ✅ Competitive Pay Based on Experience ✅ $2.50/hour Shift Premium for 2nd shift ✅ 11 Paid Holidays + 3 Additional Paid Holiday Break Days ✅ Generous Paid Time Off (Vacation & Flex Time) ✅ Excellent Benefits Package: LOW-COST Medical, Dental, and Vision Insurance Company-Paid Life Insurance & Disability Coverage 401(k) with Employer Match & Profit Sharing Accident, Hospital, & Critical Illness Coverage Options Now Hiring: Quality Inspector (2nd Shift) 📍 Location: Anderson, SC 💰 Pay Range: $22.25 - $27.96/hour What You'll Do 🛠️ Hands-on with manufacturing: support production, troubleshoot parts & fixtures ✅ Inspection pro: perform receiving checks, audits, weld certifications, and document results 📏 Metrology master: gauge repair, calibrations, and station verifications 🧹 Keep it clean: maintain organized work areas for smooth operations 📋 Quality guardian: inspect rejected/reworked material, track non-conforming parts, and escalate issues 🔧 Process evaluator: ensure proper gages at machine stations & recommend improvements Qualifications Qualifications 💬 Strong communication skills 🧠 Problem-solving mindset: define issues, collect data, draw valid conclusions Physical Requirements 🧗 Frequent climbing, bending, twisting 💪 Ability to lift up to 55 lbs

Responsibilities: Conduct visual inspections for compliance and quality standards Perform part and serial number verification Record inspection data into tracking systems Follow safety and quality protocols at all times Skills and Industry Experience: 1+ years (inspection, inventory control, or quality-related roles) High school diploma or equivalent (technical degree preferred); ability to read/interpret technical drawings, part numbers, and inspection documents; basic computer/data entry skills computer/data entry skills ASQ Certified Quality Inspector (CQI) or OSHA Safety Training preferred Ability to work well in independent and group problem-solving situations Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events Flexibility in scheduling Job type: 1099 contract Project Duration: Typically 1-2 day assignments Note: This is a 1099 contract role - project duration may vary based on client needs Shift Hours: Note: As a 1099 contractor, project schedules may vary depending on site availability Ability to commute to Louisville, KY Compensation: $20.00 - $30.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Responsibilities: Supervise and audit truck loading/unloading of 20-40 wooden book carts per truck. Verify compliance with Google's packing/handling instructions at pickup library sites. Observe loading process, document compliance, take photos, and prepare full report. Ensure professional representation of ProQC and CLIENT on-site. Recurring 1-2 inspections monthly at assigned location. Technical & Industry Experience: Minimum 3- 5 years in quality inspection, container loading supervision, or field audits. Strong understanding of container loading supervision and packing audits. Familiarity with auditing bulk/specialized cargo handling (wooden carts, books, or equivalent). Ability to verify compliance against written packing/handling instructions. Strong reporting and documentation skills. Logistics, warehousing, shipping, or field audit inspections. Experience with corporate clients, libraries, or academic institutions an added plus. Job Type: 1099 Contractor Project Duration: Monthly recurring inspections through approx. March-June 2026. Note: This is a 1099 contract role - project duration may vary based on client needs Shift Hours: Typically, during library pickup hours (daytime, exact times TBC with logistics partner).1 inspector per city per assignment. Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel to Gainesville, FL and nearby areas (exact CLIENT address can ONLY be shared once contractor joins) Compensation: $22.00 - $32.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Title: Quality Inspector Conducts routine inspection of materials and machined components as required and determines conformance to specification. Supervisory Responsibilities: None Duties/Responsibilities: Follows company policies and procedures with regard to the Quality System as they apply. Assists the Quality Engineers, Quality Manager or Department Managers in conducting timely first piece, in-process, and final inspections to determine conformance to specifications, Quality Plans or other customer requirements as directed. Uses blueprints, Quality Plans, sampling, and inspection procedures for both automotive and nonautomotive products as required. Participates in special product and process studies as directed by the Department Manager, Quality Manager, Quality Engineers, and Group Leader. Utilizes standard industry inspection equipment to conduct product and process inspections as required. Typical equipment would include Micrometers, Comparators, Calipers and other various handheld gages. Must accurately prepare various inspection reports as required to document inspection results and identify all non-conformances. Results must be reported on a timely basis. Prepares internal non-conformance reports and segregates all identified nonconforming products in accordance with company procedures. Additional Responsibilities: Carries out other general responsibilities as required by Department Manager, Quality Manager, site management and group leader. Participates in customer visits and audits as required. May also participate in product design reviews and resolution of customer complaints as required. May assist in product and process studies as required. Participates in continuous improvement activities within the inspection area or other areas of the plant. Required Skills/Abilities : Capable of using standard inspection equipment contained within the department. In addition, use of automated inspection devices, CMM's, Vision Systems and special gages including customer supplied gages. Ability to program CMM's, Vision Systems and other automated inspection devices desired. Understands the basics of blueprint interpretation, GD&T, and can provide assistance to others inside and outside the department in understanding proper inspection technique. Understands the basics of statistical process control and can monitor processes that utilize this technique. Conducts full first article inspections on complex multi-print components and subassemblies. Education and Experience: Associates degree preferred, minimum GED or High school Diploma . 2-3 years inspection experience or the equivalent experience as an inspector in a metal stamping, injection molding or related industry preferred. Certified Mechanical Inspector (desired). Actively continuing training through, courses and seminars as required (desired). Physical Requirements: Prolonged periods of sitting or standing. Must be able to lift 15 pounds at times. Must be able to access and navigate each department at the organization's facilities.

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * Ongoing FAA testing and training required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment FAA drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201771125 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Full-time Description WE ARE HIRING SKILLED QUALITY INSPECTORS FOR NIGHT SHIFT. The skilled Quality inspector must be able to read customer drawings, interpret drawing requirements, use inspection tooling, physically inspect parts, and document inspection results. The successful candidate must have the ability to follow work instructions, utilize databases, complex measurements and complete inspection reports. The skilled Quality inspector will work with direction from the quality manager. Essential Duties and Responsibilities Work from and have the ability to follow work instructions including: finding job paperwork on the network; read blueprints; set-up and use of inspection tooling; and perform visual and dimensional inspections to tight aerospace criteria; inspect parts in various stages of the machining process. Be able to perform inspection at all stages of production (First piece, In-process, Final) Ability to understand and interpret geometric dimensioning and tolerancing Interpret customer drawings and identify critical information, including feature dimensions and geometric tolerances, drawing notes, drawing revisions. Work independently with minimal supervision. Demonstrate the ability to use various inspection tooling and gauging which includes: CMM, Comparator, Microhite, Pocket Surf, Indicator, Johnson Gage, Sunnen Gage, Air Gage, all other hand tools as necessary. Perform a timely visual inspection of each work-piece to ensure it is free of any visual defects such as burrs, nicks, surface finish, scratches and other deleterious imperfections (possibly requiring the use of a microscope or other magnification devices). Exchange vital information with machine operators and engineering team about the quality of parts being manufactured. Understand and assign the frequency of data collection. Complete special inspection documentation as necessary, including FAIRs, capability studies, gage R&Rs, etc. Key Roles Provides timely and efficient inspections, understanding that accurate throughput is critical to utilization and productivity. Correctly use inspection equipment to follow inspection plan and inspect parts, as well as appropriately selecting alternate methods for inspecting parts and validating non-conformances, and communicates discrepancies to quality engineering and operations teams as necessary. Accurately completes inspection paperwork and ensures documentation is correct while notifying team if there is redundant or ineffective inspection occurring. Ensures non-conformances are reported appropriately. Works well with co-workers in quality and operations teams Requirements The successful candidate must have experience in inspection principles with preference being given to those with experience in inspecting metal parts. The individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Requirements: High school diploma or general education degree (GED), related experience and training; or equivalent combination of education and experience Required Knowledge and Skills: Ability to communicate effectively with all internal and external customers in both written and oral form. Ability to perform statistical process control input and interpret statistical data to compensate for machining deviation. Ability to perform mathematical calculations on fractions, percentages, and decimals and metric conversion. Supervisory Responsibilities This job has no supervisory responsibilities. May be required to train and assist other employees. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk; and regularly required to stand; handle, or feel and reach with hands and arms. The employee will regularly lift and/or move up to 5 to 10 pounds and rarely lift and/or move up to 50 pounds. Specific vision abilities required by this job include color vision, depth perception, and the ability to adjust focus. Annual employee vision tests are administered. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes, or airborne particles. The noise level in the work environment is frequently loud. Safety and Policy Practices The employee in this job must be knowledgeable in regard to the safety policies and procedures of the Company as described in the company safety manual. The employee must adhere to all said policies and procedures while supporting the goals and objectives of the organization and recognize the Company's need to achieve its business objective. Employee is responsible for complying with Company hazardous waste disposal procedures.

Job DescriptionResponsibilities: Supervise and audit truck loading/unloading of 2040 wooden book carts per truck. Verify compliance with Googles packing/handling instructions at pickup library sites. Observe loading process, document compliance, take photos, and prepare full report. Ensure professional representation of ProQC and CLIENT on-site. Recurring 12 inspections monthly at assigned location. Technical & Industry Experience: Minimum 3- 5 years in quality inspection, container loading supervision, or field audits. Strong understanding of container loading supervision and packing audits. Familiarity with auditing bulk/specialized cargo handling (wooden carts, books, or equivalent). Ability to verify compliance against written packing/handling instructions. Strong reporting and documentation skills. Logistics, warehousing, shipping, or field audit inspections. Experience with corporate clients, libraries, or academic institutions an added plus. Job Type: 1099 Contractor Project Duration: Monthly recurring inspections through approx. MarchJune 2026. Note: This is a 1099 contract role project duration may vary based on client needs Shift Hours: Typically, during library pickup hours (daytime, exact times TBC with logistics partner).1 inspector per city per assignment. Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel to Gainesville, FL and nearby areas (exact CLIENT address can ONLY be shared once contractor joins)

Job DescriptionResponsibilities: Conduct visual inspections for compliance and quality standards Perform part and serial number verification Record inspection data into tracking systems Follow safety and quality protocols at all times Skills and Industry Experience: 1+ years (inspection, inventory control, or quality-related roles) High school diploma or equivalent (technical degree preferred); ability to read/interpret technical drawings, part numbers, and inspection documents; basic computer/data entry skills computer/data entry skills ASQ Certified Quality Inspector (CQI) or OSHA Safety Training preferred Ability to work well in independent and group problem-solving situations Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events Flexibility in scheduling Job type: 1099 contract Project Duration: Typically 1-2 day assignments Note: This is a 1099 contract role project duration may vary based on client needs Shift Hours: Note: As a 1099 contractor, project schedules may vary depending on site availability Ability to commute to Louisville, KY

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: Naugatuck, CT Department: Quality Shift: First Shift 6am - 2:30pm JOB SUMMARY QC Stamping Inspector's primary function is the quality evaluation through gauging and inspection to validate the acceptability of stamping production, the capture of nonconforming product and the documenting of that acceptability. Evaluation is conducted as specified through provided gauging and inspection standards. QC Stamping inspectors also provide general “Quality” training, support and guidance to Stamping Department Personnel ESSENTIAL FUNCTIONS Gather samples from each stamping press twice per shift, performs visual and dimensional inspection, recording dimensional results in Mongoose (stamping inspection system of record) as well as on the Stamping Inspection Shift Report (excel file) Conduct proper defect containment, inform the Press Operators of any defects identified, as well as Set-Up personnel, Toolmakers, Tooling Engineer and/or Stamping Dept. Manager as applicable. Record actions (i.e. scrap, hold, etc..) on the Stamping Inspection Shift Report Receive QC LAB (also receiving inspection group) anodizing report, as well as supporting defect samples and address quality issues specified in their report Conduct “outgoing” (from stamping) skid audits for product from presses identified by the Stamping Q.E. Report data as specified Provided training to Stamping Department personnel as a qualified TWI trainer (Includes but not limited to developing TWI instructional break downs, providing individual training for TWI, documenting & tracking provided training, auditing TWI tasks as indicated by management) For Start-up ensure that proper documentation and standards are at each press (gauge plan, part drawing, skid tags, skid labels, and standard boards) Perform “Start-Up” inspection using applicable gauge plan, applicable standard boards and past start-up retains. Record all results on Stamping Inspection Report Maintain “Start-Up Retains Bank” located in the Toolmaker work area. As startups are approved, one raw and one anodized sample from the Start-up will be marked with the approval date and placed in the appropriate bin to be referenced on future start ups At the beginning of each shift Stamping Q.C. Inspectors will review each press and ensure correct labels, gauge plan, part drawing and correct skid tags are being used Keep Department QC Stations and/or QC Work Areas orderly at all times. Double check to make sure proper prints, gauging and inspection plans are at each press and in the QC areas as assigned. Inspect and report inspection results for New Product Development (NPD) by completing the applicable Stamping Quality portion of the First Piece Submission Routing Form Any other duties that may be assigned, including data entry, QC checks on discrepant materials, production and quality reporting, filing and maintaining paperwork, etc. Assist with any other duties and projects as required QUALIFICATIONS Must be proficient in gauging methods and procedures. Must maintain an excellent attendance record. Must be able to work independently without constant supervision and be able to work overtime as needed to cover absences. Must be proficient in the use of Microsoft Office Applications (Outlook, Excel, Word and Power Point at a minimum). Must have basic knowledge of or be trainable on Syteline. Must be able to wear prescribed safety equipment and promote a safe work environment. #1Anomatic

Responsibilities: Conduct Pre-Shipment Inspection (PSI) on plastic storage boxes Perform inspections based on sets Apply AQL sampling: GII: 315 sets (visual) Special Level S2: 8 sets (dimensional) Packaging & labeling: 40 cartons Verify dimensions, cosmetic quality, packaging, and labels Carry out destructive dimensional inspection on selected samples Prepare and submit clear, complete PSI report Equipment Requirements: Inspector must bring own barcode scanner or mobile scanning app (unless provided by vendor). Technical & Industry Experience: Minimum 2-3 years conducting Pre-Shipment Inspections (PSI) on consumer goods. Experience with: Consumer goods Plastic storage products Injection-molded products Packaging & labeling inspections Strong hands-on experience with visual, dimensional, and packaging inspections Familiarity with plastic / injection-molded products (PET preferred) Ability to perform destructive packaging checks (shrink wrap removal for dimensional study) Competent in high-volume inspections (10,000+ pcs per shipment) Proficient in professional inspection reporting (photos, findings, AQL results). Job Type: 1099 Contractor Project Duration: CURRENT PROJECT: On-going (2 -3 times per month). Note: This is a 1099 contract role - project duration may vary based on client needs Shift Hours: CURRENT PROJECT: 7 hrs. onsite + 2 hrs. report time. Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel to Sumter, SC 29153, USA and nearby areas (exact CLIENT address can ONLY be shared once contractor joins) Compensation: $25.00 - $35.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Job DescriptionResponsibilities: Conduct Pre-Shipment Inspection (PSI) on plastic storage boxes Perform inspections based on sets Apply AQL sampling: GII: 315 sets (visual) Special Level S2: 8 sets (dimensional) Packaging & labeling: 40 cartons Verify dimensions, cosmetic quality, packaging, and labels Carry out destructive dimensional inspection on selected samples Prepare and submit clear, complete PSI report Equipment Requirements: Inspector must bring own barcode scanner or mobile scanning app (unless provided by vendor). Technical & Industry Experience: Minimum 23 years conducting Pre-Shipment Inspections (PSI) on consumer goods. Experience with: Consumer goods Plastic storage products Injection-molded products Packaging & labeling inspections Strong hands-on experience with visual, dimensional, and packaging inspections Familiarity with plastic / injection-molded products (PET preferred) Ability to perform destructive packaging checks (shrink wrap removal for dimensional study) Competent in high-volume inspections (10,000+ pcs per shipment) Proficient in professional inspection reporting (photos, findings, AQL results). Job Type: 1099 Contractor Project Duration: CURRENT PROJECT: On-going (2 -3 times per month). Note: This is a 1099 contract role project duration may vary based on client needs Shift Hours: CURRENT PROJECT: 7 hrs. onsite + 2 hrs. report time. Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel to Sumter, SC 29153, USA and nearby areas (exact CLIENT address can ONLY be shared once contractor joins)

Build an Aviation Career You're Proud Of Your work ties us all together, helping our team's function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. What you'll do: Ensures the functional and acceptable status of the non-destructive test equipment in accordance with the appropriate company process. Determines the acceptance of parts and components for surface condition in preparation for the non-destructive test process. Performs the specific non-destructive test process as identified in the shop order work instruction. Processes the part(s) in accordance with the appropriate company process. Inspects and interprets the test results. Responsible for reporting on the status and performance of the NDT function to the NDT Manager as applicable. Exercises leadership on NDT related topics, including improvements and Continuous Improvement (CI) projects. Marks all unacceptable discontinuities for location and dimension. Provides technical support to NDT Inspectors Documents the completion and test results of non-destructive test process. Ensures parts are cleaned following completion of NDT process and in acceptable condition for further processing. Performs equipment and material maintenance checks in accordance with the appropriate company process. Maintains records of all maintenance performed on the non-destructive test equipment and materials. Provides instruction and training to NDT inspectors in inspection methods and practices to provide consistent application of best practices. Leads the development and monitoring of NDT related training plans including continual and re-current training Liaisons with engineering, inspection and other personnel as required to assist in researching and solving non-destructive test process problems. Acts as a mentor to NDT personnel and works closely with the Training and Development Specialist where necessary. Maintains personal qualifications as stated in the appropriate company process. Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. As required, may be assigned to perform selected duties of the NDT Inspector to meet operational goals. Carries out other duties as assigned. Position Requirements: Strong planning, organizational, leadership, interpersonal, decision making, oral and written communication skills. Minimum level III in one NDT method Knowledgeable in and understanding of inherent and non-inherent discontinuities found in materials. Knowledgeable in the Workplace Health & Safety requirements. Maintain internal non-destructive test process approval. Ability to read, understand and interpret blueprints Proficient in technical writing. Excellent decision-making skills to ensure compliance to all customer, regulatory and company requirements. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit and stand for prolonged periods. Working knowledge of production management computer system and other related internal control systems. Currently authorized to work in the Unites States without sponsorship.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Summary: The Lead Gate Inspector is responsible for efficiently and accurately coordinating the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for damage. This role requires excellent communication skills, attention to detail, and the ability to work in a fast-paced environment. Benefits: • Medical (3 plan options) • Dental & Vision • 401(k) • Paid Weekly • Paid Time Off (After probationary period) • Amazing Opportunity for Growth! Key Responsibilities: Gate Operations: - Greet and direct incoming and outgoing trucks, verifying necessary documentation and ensuring compliance with terminal rules and regulations. - Accurately record and update truck and container information in the terminal's computer system. - Issue gate passes, permits, and other required documentation to authorized personnel. - Coordinate with security personnel to ensure the safety and security of the terminal premises. Documentation and Recordkeeping: - Collect and review shipping documents, such as bills of lading, delivery orders, and customs paperwork, to ensure accuracy and completeness. - Enter data from shipping documents into the terminal's computer system accurately and efficiently. - Maintain organized and up-to-date records of truck and container movements, permits, and other relevant documentation. - Generate reports on gate activities, truck turn times, and any other requested metrics. Communication and Coordination: - Communicate effectively with truck drivers, customers, and other terminal personnel to facilitate smooth and efficient operations. - Coordinate with yard personnel to ensure the availability and proper placement of containers for loading and unloading. - Collaborate with customer service representatives to address customer inquiries, resolve issues, and provide timely updates. - Assist in coordinating with external stakeholders, including rail carriers, trucking companies, and regulatory authorities. Safety and Compliance: - Enforce safety protocols and regulations within the gate area, ensuring compliance by all personnel and visitors. - Monitor and report any security concerns, damages, or safety hazards to the appropriate personnel. - Stay updated on industry regulations and best practices related to intermodal rail terminal operations. - Assist in conducting safety and security training for terminal staff and contractors, as required. Customer Service: - Provide exceptional customer service to truck drivers, ensuring a positive experience during their interactions with the terminal. - Address and resolve customer concerns or complaints promptly and professionally. - Assist customers in locating containers and providing necessary information or assistance. Qualifications and Skills: - High school diploma or equivalent. - Valid Driver's license - Previous experience as a gate clerk or in a similar role within the intermodal rail or logistics industry is preferred. - Excellent communication and interpersonal skills. - Strong attention to detail and accuracy in data entry and recordkeeping. - Ability to multitask and prioritize tasks effectively in a fast-paced environment. - Proficiency in using computer systems and data entry software. - Basic knowledge of transportation and logistics operations. - Familiarity with relevant safety and security regulations. - Ability to work independently as well as in a team environment.

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description The role involves performing skilled inspections of aircraft parts, structures, and systems, ensuring compliance with applicable standards and specifications. This includes both visual and dimensional inspections. The inspector must read and adhere to instructions and safety information to complete tasks properly and safely. Job Duties and Responsibilities Conduct both simple and complex inspection procedures on aircraft parts, structures, and systems in line with applicable standards and specifications. Perform primary and buy-back inspections as assigned. Accurately conduct visual and dimensional inspections. Document inspection items clearly, noting any discrepancies. Utilize micrometers, gauges, calipers, indicators, and other measuring instruments and test equipment for skilled inspection work. Prepare necessary records such as inspection documentation, logs, or other records thoroughly, legibly, and promptly. Ensure previously noted and repaired items are properly completed and documented through buy-back inspections. Interpret blueprints, drawings, and other technical data. Research and retrieve technical data as needed. Maintain current knowledge of technical information and inspection techniques through research and technical reading. Lift and carry measuring instruments, tools, and test equipment; ascend and descend ladders and platforms; and work in various positions such as stooping, kneeling, or squatting. Follow safety procedures and use appropriate safety equipment for the work being performed. Read instructions and safety information as necessary for the proper and safe completion of assigned work. Communicate effectively in English regarding work activities, in accordance with FAA requirements. Perform other duties as assigned. Requirements Academic Qualifications High School Diploma or GED required. Languages Must be able to read, write, and speak effectively in English regarding safety-sensitive work activities, per FAA requirements. Special Licenses FAA Airframe and Powerplant (A&P) certificate in good standing. Previous Experience Minimum of three (3) years of aircraft maintenance experience on aircraft types consistent with those serviced by Flightstar, providing knowledge of inspection and measurement techniques, related work techniques, terminology, parts, etc. B737 Gen Fam and or Airbus 320 Gen Fam preferred. Technical Skills Perform daily transactions within Flightstar's ERP system (AMROS), vending (POU), and research customer's maintenance manuals. Physical Requirements Lift and carry hand tools, parts, and work materials; ascend and descend ladders and platforms; and frequently work in various positions such as stooping, kneeling, or squatting. Working Conditions Hangar and flightline settings in and out of weather elements Personal Protective Equipment Work safely and follow safety rules and regulations. Report unsafe working conditions and behavior. Take reasonable and prudent actions to prevent others from engaging in unsafe practices. Adhere to Flightstar's SMS (Safety Management System) safety culture. Job Posting Details FLSA Status: Non-Exempt Department: Quality Job Title: QC Inspector Reports To: QC Supervisor DOT/NON-DOT: DOT Shift: 1st Shift (5/8 Hour shifts) and Weekend Shift - Friday-Monday (4/10 Hour shifts)