Quality Control Inspector jobs at Mfg.com

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for QA Inspectors, Fixed Equipment (contract). Work will be assigned on a as needed basis and the contractor will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes ensuring that mechanical and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify results of FAT, Hydrotest non-destructive tests, etc. Monitoring welding parameters, and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness Hydrotest, FAT, non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have API 510, AWS / CWI / CSWIP Minimum of five (5) years Fixed Equipment inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Must have a minimum of 5 years of Oil and Gas Experience. Must be able to demonstrate knowledge of fixed equipment inspections. Must have welding inspections experience at manufacturer shops / facilities. Mechanical / welding inspection experience of Pressure vessels, Heat Exchangers, Tanks, Valves, etc.. would be an asset. Hours of work: Up to 8 or 10 hours a day, usually Monday to Friday subject to inspection scope requirement Work Schedule: Depending on the project requirement. This is not a permanent full time position. It is contract work and we contact you when we have a request for an inspection. If inspection site is beyond round trip 300 miles from Inspector place of residence then per diem could be applicable (client prior approval is required) Hourly rate: $42 to $48/hr. + $0.70 / km Must be eligible to work in the USA. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability. #IND

When you join the Verus Aerospace team, you are more than a number - you are a valued part of our company family. Superior craftsmanship, employee pride and a shared commitment to continuous improvement are the foundation of our success. We have a strong reputation for professionalism and quality in the aerospace industry. Our company is committed to excellence and we recognize that the right people, offering their ideas and expertise, will enable us to continue our success. We seek team members who are passionate, adaptable, driven to achieve quality results, focused on continuous improvement, self-motivated and problem solvers. Position Summary The Quality Inspector role is responsible for performing inspection to all products and ensure they meet the quality standards per customer requirement before they are delivered. Essential Duties and Responsibilities Approves incoming or outgoing metal materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials. examining and measuring parts to confirm dimensional compliance with engineering drawings, specifications, and customer requirements Experience with inspection tools: pins & block gauge, micrometers, Height gauge, Optic comparator, and calipers Identify, report, and create any non-conforming parts or discrepancies in measurements. A strong understanding of geometric dimensioning and tolerancing (GD&T) and AS9102 inspection report Experience with Discus software. 1-2 years experienced with Faro Arm or Leica. Experience with MRP/ERP systems and an understanding of how the system works. Performs all other duties as assigned. Position Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education, Experience, Knowledge, and Skills: 2+years college preferred; combination of education and work experience may be equivalent. High school diploma or General Education Degree (GED); and three years related experience. Must have 3+ years aerospace manufacturing metal experience. 2+ years manufacturing quality control inspection experience; CQI designation a plus. Possesses good reading and math skills. Strong technical aptitude and willingness to learn. Basic computer skills; knowledge of MS Office and Excel. Ability to read, understand, and apply contractual requirements, standards, specifications, blueprints, mylars, job travelers, governmental regulations, or technical procedures. Have a positive attitude when working with internal and external customers in the workplace. Ability to interpret an extensive variety of instructions and deal with several variables in work situations. Ability to work as a team in fast paced production environment and cross-training duties. Excellent documentation and record-keeping abilities. Pay Transparency The salary information is a general guideline only. A wide range of factors are considered when extending an offer, such as job-related knowledge and skills, qualifications, education/training, key skills as well as market and business considerations. Other forms of pay (e.g., bonus or long term incentive) may be provided as part of the compensation package, in addition to a full range of medical, financial, and other benefits, dependent on the position offered. California pay range$25-$35 USD Equal Employment Opportunity Verus Aerospace is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, gender, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state or federal law. This policy applies with regard to all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits and termination. A notice describing Federal equal employment law is available here. Reasonable Accommodations Verus Aerospace is committed to offering reasonable accommodations to qualified job applicants with disabilities. If you need assistance or an accommodation due to a disability, please click here to contact us and let us know the nature of your request and contact information. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Transparency In Coverage (TIC) information This is a link that will take you to Anthem's website for access to Verus' Machine-Readable Files per the Consolidated Appropriations Act, 2021 Transparency in Coverage requirement to provide Machine-Readable Files on the health plan (effective July 1, 2022). ****************************************************** ITAR Requirements To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15). E-Verify This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. E-Verify Works for Everyone For more information on E-Verify, or if you believe that your employer has violated its E-Verify responsibilities, please contact DHS. ************ dhs.gov/e-verify I certify that I have made true, correct, and complete answers and statements on my employment application, any supplements to it and in any interview in the knowledge that they will be relied upon in considering my application for employment. I understand that any false or misleading information or omission may disqualify me from further consideration for employment and may lead to my dismissal from employment or revocation of an offer of employment, if discovered at a later date. I also understand that if I am hired, I will be required to provide proof of identity and legal authorization to work in the United States and that federal immigration laws require the completion of an I-9 Form in this regard. This Company does not tolerate unlawful discrimination in its employment practices. No question on this application is used for the purpose of limiting or excluding an applicant from consideration for employment on the basis of his or her race, color, religion, national origin, genetic information, gender, gender identification, gender expression, marital status or civil partnership/union status, sexual orientation, cancer related condition, medical condition, citizenship, age, physical or mental disability (actual or perceived), pregnancy disability, or family leave status, pregnancy, breastfeeding needs, reproductive health decision-making, organ or bone marrow donor status, or military or veteran's status, or any other protected status under applicable federal, state, or local law. This company likewise does not tolerate harassment based on sex, race, color, religion, national origin, genetic information, citizenship, age, disability, or any other protected status. Harassment of our employees is strictly prohibited, whether it is committed by a manager, coworker, subordinate, or non-employee (such as a vendor or customer). The Company takes all complaints of harassment seriously and all complaints will be investigated promptly and thoroughly. I hereby understand and acknowledge that any employment relationship with this Company is of an “at will” nature, which means that my employment may be terminated by me or the company at any time for any reason or no reason, and with or without notice. It is further understood that this “at will” employment relationship cannot be changed except in writing by an authorized executive of this Company. If hired, I agree to abide by all of the Company's rules, policies, and procedures. I understand that the Company and all plan administrators shall have the maximum discretion permitted by law to administer, interpret, modify, discontinue, enhance, or otherwise change all policies, procedures, rules, benefits, or other terms or conditions of employment. I understand that in addition to this application, the employment process may, for certain positions, include any or all of the following procedures: testing - aptitude, personality and/or skill, multiple interviews, post-offer thorough background checks and drug screening test. Immigration Compliance Plan The Company policies include a commitment to non-discrimination based on race, national origin and immigration status. Pursuant to the Immigration and Nationality Act (INA), which protects work authorized individuals from employment discrimination on the basis of citizenship status or national origin, employment decisions will not be made on the basis of a person's national origin, race or immigration status except to the extent necessary to comply with the International Traffic in Arms Regulations (ITAR). In those situations, the Company will need to obtain information necessary to comply with the requirements of the International Traffic in Arms Regulations (ITAR). This will include collection of documentation to establish one of three categories of citizenship/ immigration status: (1) U.S. Citizenship; (2) Permanent Residency (Green Card) and (3) Asylum or Refugee Status (formally recognized or assigned such status by the U.S. Immigration and Customs Enforcement). If an applicant or employee does not meet the category applicable to their anticipated work for the Company, the Company cannot hire such applicant. In order to ensure ITAR compliance, all applicants and employees of the Company will have their immigration status checked through a system called “E-Verify.” If the findings on the E-Verify search are not accurate, please contact Human Resources and obtain copies of all documents related to your work status. Employees who are not authorized to work in the United States cannot be employed at the Company.

The Quality Control Lead is responsible for overseeing daily QC activities, ensuring products meet established quality standards and regulatory requirements. This role leads the QC team, coordinates testing and inspections, analyzes data, and implements corrective actions to maintain product excellence and compliance. Key Responsibilities: * Lead and supervise the Quality Control team in daily laboratory and inspection activities. * Develop, implement, and maintain QC procedures and protocols in line with company and regulatory standards. * Review and approve QC test results, ensuring accuracy and completeness. * Coordinate in-process and final product inspections and testing. * Investigate quality deviations, non-conformances, and customer complaints; lead root cause analysis and corrective/preventive actions (CAPA). * Ensure compliance with Good Manufacturing Practices (GMP), ISO standards, FDA regulations, or other relevant guidelines. * Maintain QC documentation, logs, and records to support audits and inspections. * Train and mentor QC staff on quality procedures, equipment use, and safety protocols. * Collaborate with Production, R&D, and QA teams to resolve quality issues and improve processes. * Monitor laboratory equipment calibration and maintenance schedules. * Prepare reports and present quality metrics to management.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for QA Inspectors, Fixed Equipment (contract). Work will be assigned on a as needed basis and the contractor will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes ensuring that mechanical and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify results of FAT, Hydrotest non-destructive tests, etc. Monitoring welding parameters, and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness Hydrotest, FAT, non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have API 510, AWS / CWI / CSWIP Minimum of five (5) years Fixed Equipment inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Must have a minimum of 5 years of Oil and Gas Experience. Must be able to demonstrate knowledge of fixed equipment inspections. Must have welding inspections experience at manufacturer shops / facilities. Mechanical / welding inspection experience of Pressure vessels, Heat Exchangers, Tanks, Valves, etc.. would be an asset. Hours of work: Up to 8 or 10 hours a day, usually Monday to Friday subject to inspection scope requirement Work Schedule: Depending on the project requirement. This is not a permanent full time position. It is contract work and we contact you when we have a request for an inspection. If inspection site is beyond round trip 300 miles from Inspector place of residence then per diem could be applicable (client prior approval is required) Hourly rate: $42 to $48/hr. + $0.70 / km Must be eligible to work in the USA. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability. #IND

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for QA Inspectors, Fixed Equipment (contract). Work will be assigned on a as needed basis and the contractor will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes ensuring that mechanical and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify results of FAT, Hydrotest non-destructive tests, etc. Monitoring welding parameters, and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness Hydrotest, FAT, non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have API 510, AWS / CWI / CSWIP Minimum of five (5) years Fixed Equipment inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Must have a minimum of 5 years of Oil and Gas Experience. Must be able to demonstrate knowledge of fixed equipment inspections. Must have welding inspections experience at manufacturer shops / facilities. Mechanical / welding inspection experience of Pressure vessels, Heat Exchangers, Tanks, Valves, etc.. would be an asset. Hours of work: Up to 8 or 10 hours a day, usually Monday to Friday subject to inspection scope requirement Work Schedule: Depending on the project requirement. This is not a permanent full time position. It is contract work and we contact you when we have a request for an inspection. If inspection site is beyond round trip 300 miles from Inspector place of residence then per diem could be applicable (client prior approval is required) Hourly rate: $42 to $48/hr. + $0.70 / km Must be eligible to work in the USA. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability. #IND

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for QA Inspectors, Fixed Equipment (contract). Work will be assigned on a as needed basis and the contractor will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: * The scope of work includes ensuring that mechanical and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify results of FAT, Hydrotest non-destructive tests, etc. * Monitoring welding parameters, and inspecting materials and equipment. * Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. * Verify that welders are qualified and that welding procedures and specifications (WPS) are followed correctly. * Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. * Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. * Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. * Witness Hydrotest, FAT, non-destructive testing (NDT) and interpret / verify results. * Visual inspection on the quality of welding and mechanical projects. * Ensure that materials, equipment, and safety regulations are followed. * Prepare detailed reports documenting inspection results, including any issues found. Qualifications * Must have API 510, AWS / CWI / CSWIP * Minimum of five (5) years Fixed Equipment inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. * Must have a minimum of 5 years of Oil and Gas Experience. * Must be able to demonstrate knowledge of fixed equipment inspections. * Must have welding inspections experience at manufacturer shops / facilities. * Mechanical / welding inspection experience of Pressure vessels, Heat Exchangers, Tanks, Valves, etc.. would be an asset. * Hours of work: Up to 8 or 10 hours a day, usually Monday to Friday subject to inspection scope requirement * Work Schedule: Depending on the project requirement. This is not a permanent full time position. It is contract work and we contact you when we have a request for an inspection. * If inspection site is beyond round trip 300 miles from Inspector place of residence then per diem could be applicable (client prior approval is required) * Hourly rate: $42 to $48/hr. + $0.70 / km * Must be eligible to work in the USA. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability. #IND

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. Monitoring welding parameters and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have at least one of the following: AWS / CWI / CSWIP/API Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day Hourly rate - $40 to $45/hr + $0.70/km No set schedule, the inspector will be contacted as needed. If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: * Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. * Monitoring welding parameters and inspecting materials and equipment. * Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. * Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. * Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. * Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. * Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. * Witness non-destructive testing (NDT) and interpret / verify results. * Visual inspection on the quality of welding and mechanical projects. * Ensure that materials, equipment, and safety regulations are followed. * Prepare detailed reports documenting inspection results, including any issues found. Qualifications * Must have at least one of the following: AWS / CWI / CSWIP/API * Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. * Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) * Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. * Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day * Hourly rate - $40 to $45/hr + $0.70/km * No set schedule, the inspector will be contacted as needed. * If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. * The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. Monitoring welding parameters and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have at least one of the following: AWS / CWI / CSWIP/API Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day Hourly rate - $40 to $45/hr + $0.70/km No set schedule, the inspector will be contacted as needed. If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: * Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. * Monitoring welding parameters and inspecting materials and equipment. * Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. * Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. * Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. * Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. * Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. * Witness non-destructive testing (NDT) and interpret / verify results. * Visual inspection on the quality of welding and mechanical projects. * Ensure that materials, equipment, and safety regulations are followed. * Prepare detailed reports documenting inspection results, including any issues found. Qualifications * Must have at least one of the following: AWS / CWI / CSWIP/API * Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. * Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) * Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. * Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day * Hourly rate - $40 to $45/hr + $0.70/km * No set schedule, the inspector will be contacted as needed. * If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. * The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Astranis builds advanced satellites for high orbits, expanding humanity's reach into the solar system. Today, Astranis satellites provide dedicated, secure networks to highly-sophisticated customers across the globe- large enterprises, sovereign governments, and the US military. With five satellites on orbit and many more set to launch soon, the company is servicing a backlog of more than $1 billion of commercial contracts. Astranis is the preferred satellite communications partner for buyers with stringent requirements for uptime, data security, network visibility, and customization.Astranis has raised over $750 million from some of the world's best investors, from Andreessen Horowitz to Blackrock and Fidelity, and employs a team of 450 engineers and entrepreneurs. Astranis designs, builds, and operates its satellites out of its 153,000 sq. ft. headquarters in Northern California, USA. Production Quality Inspector As a Production Quality Inspector, you are responsible for being the last line of defense in assuring mission success. You will work with the most cutting edge MicroGEO satellite technology and perform inspections in several workcenters to verify our hardware meets the highest level of quality. The ideal candidate is self-driven, extremely detail oriented, and seeks a highly cross functional dynamic environment. Responsibilities Perform in-process inspection and final verification of flight hardware to drawing, process specifications, and work order requirements supporting multiple work centers (assembly, integration, wire harnessing, or test) Identify, document, and verify resolution of production and test non-conformances in accordance with prescribed procedures and pursue corrective action as required Interface with engineering and production to communicate and help resolve nonconforming issues Independently perform inspections and verifications, documenting results in a clear, precise, and complete manner Support quality management system policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and lean manufacturing initiatives Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment Requirements 3+ years of inspection experience in an aerospace, military or manufacturing environment Substantial knowledge of the control of nonconforming hardware, failure/root cause analysis, corrective and preventive action processes Experience reading and interpreting design drawings and CAD models Experience with performing electronic testing and inspection using portable measuring devices and lab equipment (microscopes, testers, scopes, etc) Excellent communication (written and verbal) and teamwork skills Ability to work independently with a strong work ethic, be innovative, detail oriented, possess initiative, and team oriented Willing and able to work overtime and/or weekends as required Bonus Associate degree or higher in quality, engineering, or related field Knowledgeable with ISO 9001/AS9100 quality management systems Experience inspecting solder, crimping, conformal coating, staking, and surface mounted devices in accordance with IPC-J-STD-001 or IPC-A-610 standards Wire harness experience in accordance with IPC-A-620 standards Six Sigma Yellow/Green Belt certified What we offer: All our positions offer a compensation package that includes equity and robust benefits. Base pay is a single component of Astranis's total rewards package, which may also include equity in the form of incentive stock options, high quality company-subsidized healthcare, disability and life insurance benefits, flexible PTO, 401(K) retirement, and free on-site catered meals. Astranis pay ranges are informed and defined through professional-grade salary surveys and compensation data sources. The actual base salary offered to a successful candidate will additionally be influenced by a variety of factors including experience, credentials & certifications, educational attainment, skill level requirements, and the level and scope of the position.Base Hourly Pay$35-$45 USDU.S. Citizenship, Lawful Permanent Residency, or Refugee/Asylee Status Required (To comply with U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the United States, or other protected individual as defined by 8 U.S.C. 1324b(a)(3)) Our mission and our products are meant to connect the world and everyone in it, regardless of gender, race, creed, or any other distinction. We believe in a diverse and inclusive workplace, and we encourage all people to join our team and bring their unique perspective to help make us stronger.

Astranis builds advanced satellites for high orbits, expanding humanity's reach into the solar system. Today, Astranis satellites provide dedicated, secure networks to highly-sophisticated customers across the globe- large enterprises, sovereign governments, and the US military. With five satellites on orbit and many more set to launch soon, the company is servicing a backlog of more than $1 billion of commercial contracts. Astranis is the preferred satellite communications partner for buyers with stringent requirements for uptime, data security, network visibility, and customization.Astranis has raised over $750 million from some of the world's best investors, from Andreessen Horowitz to Blackrock and Fidelity, and employs a team of 450 engineers and entrepreneurs. Astranis designs, builds, and operates its satellites out of its 153,000 sq. ft. headquarters in Northern California, USA. Supplier Quality Inspector As a Supplier Quality Inspector, you will own your own incoming inspection station/area where you will be responsible for being the first line of defense in assuring quality of parts received at Astranis. You will work with the most cutting edge MicroGEO satellite technology and perform inspections across different commodities to verify our hardware meets the highest level of quality. The ideal candidate is self-driven, extremely detail oriented, and seeks a highly cross functional dynamic environment. Role Perform receiving inspection of flight hardware against 2D Drawings and Part Specifications, as per Work Order instructions - support multiple commodities (machined parts, assemblies and systems, PCBA, and Harnesses) Document and manage Non-Conformances - Create Non Conformance Tickets, communicate cross-functionally, and perform Dispositions and Corrective Actions as needed Provide feedback to Engineering Teams ensure efficiency and feasibility of Work Order & Inspection Procedures Interface with Engineering and Production Teams to support and even drive resolution and correction of Non Conformances Inspect hardware's quality documentation like Certificates of Conformance, End Item Data Packages, and able to go online and find Technical Data Packages Own an Incoming Quality station - maintain standardization, cleanliness, and efficient work flow This role will have a "strong voice and presence" to own and lead initiatives of continuous improvement with Facilities, Production, and Engineering Teams Requirements 3+ years of inspection experience in an aerospace, military or manufacturing environment Substantial knowledge of the control of nonconforming hardware, failure/root cause analysis, corrective and preventive action processes Experience reading and interpreting design drawings and CAD models Experience using metrology manual gauges (micrometer, height gauge, caliper, go/no-go gauges, etc.) Experience using microscope to visualize and photographed zoomed in defects Excellent communication (written and verbal) and teamwork skills Ability to work independently with a strong work ethic, be innovative, detail oriented, possess initiative, and team oriented Willing and able to work overtime and/or weekends as required Bonus Associate degree or higher in quality, engineering, or related field Knowledgeable with ISO 9001/AS9100 quality management systems Familiar with IPC Workmanship Inspections Six Sigma or Lean Manufacturing training What we offer: All our positions offer a compensation package that includes equity and robust benefits. Base pay is a single component of Astranis's total rewards package, which may also include equity in the form of incentive stock options, high quality company-subsidized healthcare, disability and life insurance benefits, flexible PTO, 401(K) retirement, and free on-site catered meals. Astranis pay ranges are informed and defined through professional-grade salary surveys and compensation data sources. The actual base salary offered to a successful candidate will additionally be influenced by a variety of factors including experience, credentials & certifications, educational attainment, skill level requirements, and the level and scope of the position.Base Hourly Pay$35-$45 USDU.S. Citizenship, Lawful Permanent Residency, or Refugee/Asylee Status Required (To comply with U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the United States, or other protected individual as defined by 8 U.S.C. 1324b(a)(3)) Our mission and our products are meant to connect the world and everyone in it, regardless of gender, race, creed, or any other distinction. We believe in a diverse and inclusive workplace, and we encourage all people to join our team and bring their unique perspective to help make us stronger.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: * Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. * Monitoring welding parameters and inspecting materials and equipment. * Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. * Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. * Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. * Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. * Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. * Witness non-destructive testing (NDT) and interpret / verify results. * Visual inspection on the quality of welding and mechanical projects. * Ensure that materials, equipment, and safety regulations are followed. * Prepare detailed reports documenting inspection results, including any issues found. Qualifications * Must have at least one of the following: AWS / CWI / CSWIP/API * Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. * Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) * Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. * Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day * Hourly rate - $40 to $45/hr + $0.70/km * No set schedule, the inspector will be contacted as needed. * If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. * The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. Monitoring welding parameters and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have at least one of the following: AWS / CWI / CSWIP/API Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day Hourly rate - $40 to $45/hr + $0.70/km No set schedule, the inspector will be contacted as needed. If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

FQC (Final Quality Control) San Jose, CA About the job: FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) About the JobFoxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a FQC you will be mainly responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality Control Technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. QUALIFICATIONS: EDUCATION: High school diploma or GED equivalent and/or training or equivalent combination of education and experience EXPERIENCE: Minimum of 1-2 years of experience in a manufacturing environment LANGUAGE: English proficiency is required, Mandarin proficiency is a plus. SKILLS: Great verbal and written communication skills Familiarity with electronic and mechanical components related to PCBA contract manufacturing Accuracy for documentation Effectively present information and respond to questions from managers and employees Common sense to solve practical problems Knowledge of ESD, IPC-600/610, workmanship standards and experience Attention to detail RESPONSIBILITIES: Use basic inspection tool/device, example: magnifying lens, microscope, caliper, and color pantone Maintains safe and clean working environment by complying with procedures, rules, and regulations Inspect materials or assembled parts or products for defects and deviations from specifications Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments Discuss inspection results with those responsible for products Discard or reject products, materials, and equipment not meeting specifications Contributes to team effort by accomplishing related results as needed Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality control equipment Perform inspections across all stages of of production Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency Pay rate: $22/h Status: Non-Exempt Work schedule: Swing shift: 3:15PM - 11:45PM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S.

FQC (Final Quality Control) San Jose, CA About the job: FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) About the JobFoxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a FQC you will be mainly responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality Control Technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. QUALIFICATIONS: EDUCATION: High school diploma or GED equivalent and/or training or equivalent combination of education and experience EXPERIENCE: Minimum of 1-2 years of experience in a manufacturing environment LANGUAGE: English proficiency is required, Mandarin proficiency is a plus. SKILLS: Great verbal and written communication skills Familiarity with electronic and mechanical components related to PCBA contract manufacturing Accuracy for documentation Effectively present information and respond to questions from managers and employees Common sense to solve practical problems Knowledge of ESD, IPC-600/610, workmanship standards and experience Attention to detail RESPONSIBILITIES: Use basic inspection tool/device, example: magnifying lens, microscope, caliper, and color pantone Maintains safe and clean working environment by complying with procedures, rules, and regulations Inspect materials or assembled parts or products for defects and deviations from specifications Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments Discuss inspection results with those responsible for products Discard or reject products, materials, and equipment not meeting specifications Contributes to team effort by accomplishing related results as needed Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality control equipment Perform inspections across all stages of of production Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency Pay rate: $22/h Status: Non-Exempt Work schedule: Swing shift: 3:15PM - 11:45PM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S.

TS Conductor is a startup company focused on reducing the carbon footprint in the world. We are looking to hire Quality Inspectors to ensure that our processes meet the required quality standards and that any defects or non-conformities are identified and corrected. Our team uses a variety of equipment to measure properties from material strength to conductivity, maintains accurate records, and communicates with other stakeholders to improve quality control procedures and processes. If you're hard-working and dedicated and believe in working for a better world, TS Conductor is an ideal place to get ahead. Essential Functions Inspecting output samples using industry-appropriate methods that include dimensional measurements, tensile strength testing, and resistivity measurements. Checking that the production line adheres to standards and procedures and complies with industry-standard requirements. Reading and interpreting blueprints and standard specifications (ASTM, ISO, internal, etc.) against produced goods. Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database. Training the production team on quality control measures to improve product excellence. Contribute to root cause analysis and corrective action investigations for significant nonconformances and process anomalies. Monitoring the use of equipment to ensure it is safe and discarding any that do not meet requirements. Updating job knowledge by engaging in educational opportunities and regular training. Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs. Using gauges such as calipers, micrometers, Ohm meters, and tensile testing machines to measure products. Collecting and compiling statistical quality data. Assisting in the development of test methods and inspection plans. Determining the causes of product defects and reworks. Verifying all equipment is calibrated correctly. Knowledge of ISO 9001:2015 standards. Capable to write procedure and Work instruction adhering to customer specs and ISO standards. Other duties as assigned. Incentive Comprehensive Medical, Dental, Vision Vacation, Sick, and holidays paid 401 (K) company match Life Insurance coverage Long-term Disability EAP and Legal support Supplemental Accident Injury insurance Supplemental Critical Illness Insurance FSA Medical / Dependent Care Referral Bonus Requirements / Training and Experience High school diploma or equivalent qualification. A minimum of 2 years' experience in a similar role. Physically capable and available to work overtime including weekends, public holidays, and evenings. Effective problem-solving abilities. Must be well- organized and have the ability to prioritize tasks. Deep Knowledge of destructive and nondestructive techniques Documentation and reporting skills Teamwork and collaboration Comfortable standing or walking for long periods of time Work Environment The Quality Inspector position works in a lab safety sensitive manufacturing environment. The Quality Inspector will often work directly on the shop floor of the manufacturing facility, near and around large-scale production processes and equipment to interact with production teams and observe processes. The position will spend time in the quality control lab performing tasks such as testing, documenting to improve, maintain, and manufacture production lines, analyzing data, maintain and improve audit excel sheets/logs, creating instructions, and collaborating with others. Occupational health and safety practices are essential in manufacturing environments, and the Quality Inspector is expected to adhere to safety protocols and wear appropriate protective equipment when necessary.

Job Description Ready to ensure precision where it matters most? Join an established aerospace manufacturer where your inspection expertise directly impacts flight safety and mission success. This isn't just quality control-it's aerospace excellence with a 4x10 schedule. Company Description Our client is a well-established 62+ year aerospace fittings manufacturer in Covina, CA, known for their close-knit culture, employee longevity, and aggressive 5-7 year growth plan backed by significant capital investment. They specialize in high-precision hydraulic and pneumatic system components for critical aerospace applications. Role Impact As a Quality Inspector, you'll be the final checkpoint ensuring every aerospace fitting meets exacting dimensional specifications before it reaches the aircraft. Your measurements and inspections protect both product integrity and aviation safety while supporting the company's production expansion goals. Key Responsibilities Perform dimensional inspections using precision hand tools including micrometers, calipers, gages, optical comparators, height gages, and drop indicators to verify aerospace component specifications Read and interpret complex blueprints with aerospace standards (AS, MS, NAS, NSA) and work instructions to ensure dimensional accuracy Monitor production operations in real-time to identify non-conformances and recommend immediate corrective adjustments Conduct First Article Inspections independently to validate new setups and production runs meet engineering requirements Communicate inspection findings clearly to machinists, supervisors, and production personnel to maintain quality flow Support calibration protocols for inspection equipment to ensure measurement accuracy and compliance with aerospace quality standards Document inspection results and maintain quality records in accordance with ISO 9001 and AS9100 requirements Reject non-conforming products and materials that fail to meet specifications, protecting downstream operations Qualifications Required 2+ years of quality inspection experience in manufacturing environment Proficiency with precision measurement tools: micrometers, calipers, gages, optical comparators, height gages Blueprint reading skills with ability to interpret GD&T (Geometric Dimensioning and Tolerancing) Strong mathematical skills for dimensional analysis and tolerance verification Familiarity with Microsoft Windows operating systems for quality documentation Preferred Aerospace or precision machining inspection background AS9100 or ISO 9001 quality system knowledge Experience with First Article Inspection protocols ITAR compliance awareness Optical comparator proficiency for complex geometry verification Benefits & Value Proposition Compensation: Market competitive based on experience Work-Life Balance: 4-day work week (10-hour shifts) Three-day weekends standard Overtime opportunities available for additional earnings Comprehensive Benefits: 401(k) with company match Medical, dental, and vision insurance Paid time off Life insurance Why This Opportunity Stands Out: Family-oriented culture with employees who have long tenures Part of aggressive growth plan with human capital as top priority Work with advanced aerospace components for critical applications Skills-based evaluation culture that values technical expertise Stable, established company with 62+ year track record Culture Join a close-knit quality team where craftsmanship is valued and your technical expertise makes an immediate impact. The Operations Manager genuinely cares about team success and creates an environment where precision and attention to detail are celebrated. Long employee tenures reflect the supportive, family-oriented atmosphere. Call-to-Action Ready to be the guardian of aerospace quality? Apply and Pave Talent will contact qualified candidates within 48 hours. Confidential search-your application privacy is fully protected. Apply now to join a growing aerospace leader!

Meet Yubico: the creator of the most secure passkeys and leading provider of hardware authentication security keys. Our company's mission is to make secure login easy and available for everyone. Yubico was founded in 2007 by Stina and Jakob Ehrensvard, and is public on Nasdaq Stockholm Main Market: YUBICO. Our customers include Fortune 500 companies, hundreds of government agencies and millions of individuals in over 160 countries that rely on Yubico technology to secure access to computers, online services and mobile apps. We are a global company with a strong company culture and employees located in over 14 countries. Yubico's headquarters are based in Stockholm, Sweden and Santa Clara, CA. Aligned with our mission to make the internet more secure for everyone, Yubico donates YubiKeys to organizations helping at-risk individuals through our philanthropic initiative, Secure it Forward. At Yubico, we offer: Yubico Values: We work to ensure that our employees have an open space to have their voices amplified to create a workplace where everyone feels like they belong. Aligned with this, our employees have created some pretty cool Employee Resource Groups: YubiPride, YubiBIPOC, YubiSustainability and YubiWomen. Additionally, Yubico donates YubiKeys to organizations in need all over the world (you can read more about our work here). Social Connection: Relationships and connectedness matter, and we love spending time with our team! Our virtual workspace keeps us connected day-to-day whether it's through Yubico celebrating wins or our buzzing Slack communities. Check out our Life at Yubico Page on LinkedIn and our awards here. The Role: Yubico is looking for a Quality Control Engineering Technician to manage Yubico's extensive Production Hardware from all aspects of product and process quality. The ideal candidate will have experience owning and leading the technical Quality role. Local to Santa Clara, CA. Tasks & Responsibilities: * Design and create test plans, processes and equipment for hardware products * Perform product validation activities to ensure products meet defined specifications and quality standards. Carry out functional, dimensional, and environmental tests using appropriate equipment * Work closely with cross-functional teams (design, development, manufacturing, customer support) to provide feedback and input on product design and processes * Generate and maintain documentation related to hardware design, testing, and quality control * Participate in design reviews and risk assessments to identify potential quality issues early in the development cycle * Ensure products comply with regulatory requirements and industry best practices * Monitor quality metrics, identify trends, and develop new metrics to drive continuous improvement in product and process quality Basic Qualifications: * Diploma or degree in Electronics, Mechanical, Electrical, or related engineering discipline * Prior experience in hardware quality control/assurance, manufacturing quality, or a related field, particularly within consumer electronics * Experience with hardware design, testing, and manufacturing processes * Proficiency with standard electrical engineering test equipment like calipers, oscilloscopes, multimeters, and logic analyzers * Familiarity with standard communication protocols, such as SPI, I2C, and USB * Familiarity with reading and interpreting hardware schematics, mechanical drawings and technical specifications * Understanding of GD&T for mechanical designs or implementation * Experience with test automation using scripting languages like Python * Ability to analyze data, identify trends, and determine root causes of issues Bonus Qualifications: * Soldering Skills * Ability to build wiring harnesses * Experience with industry standards (e.g., IPC-A-610, ISO 9001, AS9100) $37 - $40 an hour Yubico offers a holistic Total Rewards package designed to support our employees in all aspects of their life inside and outside of work. This role has an hourly rang of $37 to $40 an hour for a candidate located in the San Francisco Bay Area. For roles that are filled in other locations, the compensation range will be based on data provided by the Radford McLagan Compensation Database from Aon. Final compensation is also based on a number of factors including, but not limited to, job-related knowledge, skills, and experience. #LI-Onsite #LI-BR1 Our U. S. benefits are designed for your overall well-being: Health coverage. We've got you covered with top of the line health plans, including dental and vision. We pay 100% of your premium and 85% for your family. Retirement plan. Our retirement plan includes a 401K dollar per dollar match up to 6% with a cap of $6K/year. Immediate vesting. Wellness reimbursement. We offer $1,200.00 in wellness earnings (prorated based on start date) that you can use on your gym membership, a massage, or your favorite online fitness classes. This is a taxable benefit if you choose to participate. Learning and development. We encourage your professional growth and offer a yearly development stipend of $3,000 and mentorship program. Time off. We offer a total of 15 vacation days plus 10 holidays, and 7 sick days a year. Paid parental leave. We love welcoming new family members to our YubiTeam! All parents receive 8 weeks of paid leave. Birthing parents receive an additional 8 weeks of paid leave (16 weeks total). Commuter Benefits. If you need to commute to the office, we offer commuter benefits. Strong mission & company values. We're a global team on a global mission to make the internet more secure for everyone. We believe that every person's work matters. That you should always be nice, stay humble, and have fun, and never take yourself too seriously. We are an equal opportunity employer, we value diversity and uphold an inclusive environment where all people feel that they are equally respected and valued. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, religion, national origin, disability, protected Veteran status or any other characteristic protected by law. We'd love to learn about what you can add to our diverse team. We are an E-Verify Participating Employer. Yubico does not accept agency resumes or referrals so please do not send them to our careers staff or employees. Yubico is not responsible for any fees related to unsolicited resumes or referrals. Personal data submitted through this form is used for managing Yubico's recruitment activities, which include facilitating any application you make, setting up and conducting interviews and tests for applicants, evaluating and assessing results and selecting candidates, and as otherwise needed in our recruitment and onboarding processes. The use of your personal data may also be necessary prior to entering into a contract with you (that is prior to offering you a job with Yubico). Your personal data will only be used for the purposes for which it was collected and in accordance with the Yubico Privacy Notice. We only keep your personal data for as long as necessary and in compliance with Yubico's record retention policies. If you have asked us to, we will keep you informed of other opportunities at Yubico. We do this in various ways, including email and by phone. If at any time you do not want us to contact you or use your information as described herein please contact us at [email protected] to let us know and we will delete all such information. Providing your personal data is voluntary, but necessary to join our talent community, and if you do not agree to provide your data, we will not be able to consider you as part of our talent community. As part of providing the requested service, we will transfer your data to be processed by Lever, Inc., a service provider contracted by Yubico AB and/or its subsidiaries that meets legally mandated privacy requirements. The Yubico Privacy Notice offers more information about Yubico privacy practices, including the lawful basis for processing of personal data, how to lodge a complaint with the supervisory authority, and how to contact Yubico to exercise your data subject rights. In this notice, when we refer to "Yubico", "us", "we" or "our", we mean the Yubico group company or companies that you apply to, or correspond with, and which are responsible for any personal data collected about you. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.