Forklift Operator jobs at Michael Foods

Pay: $20 per hour Title: Driver Reports to: Facility supervisor or management designee Summary: The responsibilities include but are not limited to being responsible for collecting customer information regardless of media type. Additionally, this position, while operating company vehicles, will use the utmost care and discretion by adhering to federal and state transportation laws and any related company policies. Essential functions: Drive vans or box trucks to customer locations for service needs. Report to work on time prepared to perform the duties of the position. Meet department productivity and quality standards. Receive, comprehend, and respond appropriately to direction. Work with customers to fulfill customer service requests. All other duties as assigned by supervisor or DOO. In the event of inclement weather, report to work two hours before regularly scheduled time to allow for delays and to budget time to put tire chains on company vehicles, if necessary. General warehouse operations: Operate forklift Barcode and process new boxes Pull access list. Refile Boxes/Files Barcode and process boxes scheduled for destruction. Perform responsibilities related to bay consolidations. Demonstrate proficiency in operating a picker forklift or other company equipment. Prior to signing out equipment performs operations and safety check, including battery, brakes, lift controls, and fire extinguisher. Proceeds safely to assigned area to pull, load and move boxes. Warehouse maintenance Make pickups and deliveries. Vehicle maintenance Other duties as assigned. At the end of each day, return equipment to the correct charging station, and prepares equipment for daily (overnight) charge. Requirements Competencies: Has a positive and respectful attitude Able to accept change in directions as customer needs change. Well organized and detail oriented Able to work both in a team environment and as an individual contributor. Able to follow all company policies and procedures. Self-motivated Works well under pressure. Good knowledge of city streets or able to read a city map. Ability to use handheld device, electric pickers, drive van or box truck. Work environment: Must be able to tolerate heat in the summer and cold in the winter. Physical demands: While performing the duties of this job, the employee is regularly required to stand and walk. The employee is occasionally required to sit, climb/balance, stoop, kneel, or crouch. Must be able to reach, handle, carry, and lift between 10 lbs. and up to 50 lbs. While performing job duties, the employee is regularly required to talk, hear, read, and identify numbers for accurate order filling and receiving of material. Education and eligibility requirements: High School Diploma or equivalent Valid driver's license MVR Check Background check Must be able to pass random drug screens. Must be able to carry a cell phone to be in constant communication with the Records Center Strong commitment to accuracy and quality Must be able to work overtime and available around the clock including holidays Strong directional awareness and navigational skills Commercial Driver's License, if applicable Other duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the applicant for this job. Activities, duties, and responsibilities may change at any time with or without notice. VRC is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, disability, medical condition, genetic information, military and veteran status, marital status, age, or any other basis protected by applicable federal, state, or local laws. We also consider qualified applicants with arrest and conviction records consistent with the Fair Chance Ordinance.

A&A Safety, Inc. is a leading provider in traffic safety, dedicated to ensuring public safety on highways and roadways. As a family-owned business, we prioritize the safety and well-being of our employees, fostering teamwork to deliver outstanding products and services to our customers. Our offerings include traffic control, pavement marking, construction and roadway signage, traffic control devices, personal protective equipment, and graphic design services. A&A Safety, Inc. is currently seeking dependable, energetic, and highly motivated individuals with a positive attitude and strong work ethic to join our team as a Yard Laborer. Responsibilities: Preparing and loading trucks with materials. Moving materials within the yard and warehouse. Performing pick-ups and deliveries of materials. Maintaining organization of inventory in the yard and warehouse. Clean and Repair yard equipment, vehicles and yard property & structures as needed. Ability to work outdoors in incremental weather conditions. Must be able to lift 50lbs continuously. Requirements: A valid driver's license. High school diploma or GED. Additional Information: This role offers ample opportunities for learning and advancement within the A&A Safety team. A pre-employment drug screening is mandatory, as we maintain a drug-free workplace. Candidates must consent to driving record verification and/or background checks. A&A Safety, Inc. is committed to affirmative action and equal employment opportunities for all. Application Process: Please apply now if you wish to be part of the A&A Safety winning team! No phone calls, please.

Job DescriptionJob Purpose Produces process products by preparing, establishing, monitoring, and controlling production processes; maintaining quality, safety, and cleanliness standards; documenting production and processes; and maintaining equipment. Duties Prepares for process production by reviewing production schedules, drawings, and processing specifications; retrieving materials from inventory; sampling materials; sending samples to the laboratory; verifying laboratory acceptance; calculating and measuring materials; and checking tanks, vessels, piping, valves, steam traps, pumps, compressors, prime movers, heat exchangers, reactors, separators, mixers, and distillers. Establishes production processing specifications by setting and programming processing controls, pumps, compressors, and auxiliary equipment. Monitors processing production by operating distributed control systems (DCS); reviewing processing variables; observing control panels and alarms; analyzing operating logs; determining process stability; and adjusting or reprogramming controls. Maintains quality production by obtaining and testing process samples, conducting inspections, and recommending process improvements. Documents production processes by logging processing statistics accurately and in a timely manner. Ensures operation of the processing system by completing preventive maintenance requirements; following manufacturer instructions; troubleshooting malfunctions; and reporting malfunctioning units. Maintains a safe and clean processing environment by complying with all procedures, rules, and regulations; and regularly patrolling the unit. Maintains continuity among work shifts by communicating actions taken, irregularities, and ongoing needs. Skills & Experience Preferred Distillation and/or vacuum experience Effective written and verbal communication skills High school diploma or equivalent 2-5 years of experience, including: Manufacturing methods and procedures Process improvement Analyzing information Understanding controls and instrumentation Maintaining manufacturing quality Requirements Must be able to lift at least 50 pounds. Must be able to work more than 8 hours per day and more than 40 hours per week as needed. Schedule: 12-hour rotating shifts (days, nights, and weekends). Pay Rate $33.94 - $36.78 per hour

Job Purpose Produces process products by preparing, establishing, monitoring, and controlling production processes; maintaining quality, safety, and cleanliness standards; documenting production and processes; and maintaining equipment. Prepares for process production by reviewing production schedules, drawings, and processing specifications; retrieving materials from inventory; sampling materials; sending samples to the laboratory; verifying laboratory acceptance; calculating and measuring materials; and checking tanks, vessels, piping, valves, steam traps, pumps, compressors, prime movers, heat exchangers, reactors, separators, mixers, and distillers. Establishes production processing specifications by setting and programming processing controls, pumps, compressors, and auxiliary equipment. Monitors processing production by operating distributed control systems (DCS); reviewing processing variables; observing control panels and alarms; analyzing operating logs; determining process stability; and adjusting or reprogramming controls. Maintains quality production by obtaining and testing process samples, conducting inspections, and recommending process improvements. Documents production processes by logging processing statistics accurately and in a timely manner. Ensures operation of the processing system by completing preventive maintenance requirements; following manufacturer instructions; troubleshooting malfunctions; and reporting malfunctioning units. Maintains a safe and clean processing environment by complying with all procedures, rules, and regulations; and regularly patrolling the unit. Maintains continuity among work shifts by communicating actions taken, irregularities, and ongoing needs. Skills & Experience Preferred Distillation and/or vacuum experience Effective written and verbal communication skills High school diploma or equivalent 2-5 years of experience, including: Manufacturing methods and procedures Process improvement Analyzing information Understanding controls and instrumentation Maintaining manufacturing quality Requirements Must be able to lift at least 50 pounds. Must be able to work more than 8 hours per day and more than 40 hours per week as needed. Schedule: 12-hour rotating shifts (days, nights, and weekends). Pay Rate $33.94 - $36.78 per hour

Job Purpose Produces process products by preparing, establishing, monitoring, and controlling production processes; maintaining quality, safety, and cleanliness standards; documenting production and processes; and maintaining equipment. Prepares for process production by reviewing production schedules, drawings, and processing specifications; retrieving materials from inventory; sampling materials; sending samples to the laboratory; verifying laboratory acceptance; calculating and measuring materials; and checking tanks, vessels, piping, valves, steam traps, pumps, compressors, prime movers, heat exchangers, reactors, separators, mixers, and distillers. Establishes production processing specifications by setting and programming processing controls, pumps, compressors, and auxiliary equipment. Monitors processing production by operating distributed control systems (DCS); reviewing processing variables; observing control panels and alarms; analyzing operating logs; determining process stability; and adjusting or reprogramming controls. Maintains quality production by obtaining and testing process samples, conducting inspections, and recommending process improvements. Documents production processes by logging processing statistics accurately and in a timely manner. Ensures operation of the processing system by completing preventive maintenance requirements; following manufacturer instructions; troubleshooting malfunctions; and reporting malfunctioning units. Maintains a safe and clean processing environment by complying with all procedures, rules, and regulations; and regularly patrolling the unit. Maintains continuity among work shifts by communicating actions taken, irregularities, and ongoing needs. Skills & Experience Preferred Distillation and/or vacuum experience Effective written and verbal communication skills High school diploma or equivalent 2-5 years of experience, including: Manufacturing methods and procedures Process improvement Analyzing information Understanding controls and instrumentation Maintaining manufacturing quality Requirements Must be able to lift at least 50 pounds. Must be able to work more than 8 hours per day and more than 40 hours per week as needed. Schedule: 12-hour rotating shifts (days, nights, and weekends). Pay Rate $33.94 - $36.78 per hour

MANE is a 5 th generation French family-owned business known for innovation and progress in the world of Flavor and Fragrance. As sensation enthusiasts, we strive to provide exceptional moments in people's daily lives through the timeless flavors and fragrances we create. With our passion, creativity, and innovation, “We capture what moves”. The Logistics Operator I will be involved in multiple tasks associated with logistics including but not limited to shipping, receiving, sample pulling, cycle counting, warehouse management, and material handling. This position interacts with Customer Service, Quality, Planning, Regulatory, Purchasing, Production, Accounting, and external Carriers and Auditors. Key competencies: Analytical Skills, Communication and Interpersonal Skills, Mathematical Skills including Weights and Conversions, Understanding of Supply Chain Activities, and Strong Computer Skills. Shift: 2-2-3 schedule 5 pm - 5:30 am (3rd shift) every other weekend. DUTIES AND RESPONSIBILITIES: Maintain strict adherence to equipment SOPs, GMP standards, food & flavor regulations (kosher), and documentation requirements. Adhere to all safety protocols, including use of engineering controls and Personal Protective Equipment (PPE) to ensure a safe workplace for all employees. Assisting with the shipment of finished products to customers according to customer order requirements, ensuring accurate paperwork, labeling, and on-time delivery Communicate effectively with Customer Service, Purchasing, Quality, Regulatory, Planning and Carriers on a daily basis or as needed Assisting with receiving all raw materials and supplies into the warehouse, check condition of materials and accuracy of paperwork, and provide sample to Quality Control. Maintain inventory integrity and good housekeeping in the warehouse. Material sample pulling to support R&D and Quality business needs. Cycle counting Responsible for adding waste to a satellite accumulation container, labeling, sampling and transporting hazardous waste. Other duties as assigned by management. Consistent with MANE's environmental commitments, employees will engage in awareness and practical training, relevant to job-related and job-specific roles and responsibilities, in order to adhere to applicable environmental policies, procedures, and best practices. EDUCATION AND EXPERIENCE: High School Diploma or equivalent required. 1-2 years of shipping, receiving, and warehouse experience preferred. Forklift and Dangerous Goods (hazmat) experience preferred. (Training will be provided) Flavor industry desired. Strong computer skills with emphasis on Microsoft Office and ERP systems required. MANE offers industry leading benefits including a generous PTO plan. Additional benefits include paid holidays, annual year-end shut down, annual and bi-weekly 401(k) contributions, tuition reimbursement, paid parental leave, employee assistance programs and many more. MANE is known for having a culture that focuses on our employees and their well-being. See for yourself why our employees love working at MANE! MANE is an equal opportunity employer. 2-2-3 schedule 5 pm - 5:30 am (3rd shift) every other weekend.

Job Description MANE is a 5th generation French family-owned business known for innovation and progress in the world of Flavor and Fragrance. As sensation enthusiasts, we strive to provide exceptional moments in people's daily lives through the timeless flavors and fragrances we create. With our passion, creativity, and innovation, “We capture what moves”. The Logistics Operator I will be involved in multiple tasks associated with logistics including but not limited to shipping, receiving, sample pulling, cycle counting, warehouse management, and material handling. This position interacts with Customer Service, Quality, Planning, Regulatory, Purchasing, Production, Accounting, and external Carriers and Auditors. Key competencies: Analytical Skills, Communication and Interpersonal Skills, Mathematical Skills including Weights and Conversions, Understanding of Supply Chain Activities, and Strong Computer Skills. Shift: 2-2-3 schedule 5 pm - 5:30 am (3rd shift) every other weekend. DUTIES AND RESPONSIBILITIES: Maintain strict adherence to equipment SOPs, GMP standards, food & flavor regulations (kosher), and documentation requirements. Adhere to all safety protocols, including use of engineering controls and Personal Protective Equipment (PPE) to ensure a safe workplace for all employees. Assisting with the shipment of finished products to customers according to customer order requirements, ensuring accurate paperwork, labeling, and on-time delivery Communicate effectively with Customer Service, Purchasing, Quality, Regulatory, Planning and Carriers on a daily basis or as needed Assisting with receiving all raw materials and supplies into the warehouse, check condition of materials and accuracy of paperwork, and provide sample to Quality Control. Maintain inventory integrity and good housekeeping in the warehouse. Material sample pulling to support R&D and Quality business needs. Cycle counting Responsible for adding waste to a satellite accumulation container, labeling, sampling and transporting hazardous waste. Other duties as assigned by management. Consistent with MANE's environmental commitments, employees will engage in awareness and practical training, relevant to job-related and job-specific roles and responsibilities, in order to adhere to applicable environmental policies, procedures, and best practices. EDUCATION AND EXPERIENCE: High School Diploma or equivalent required. 1-2 years of shipping, receiving, and warehouse experience preferred. Forklift and Dangerous Goods (hazmat) experience preferred. (Training will be provided) Flavor industry desired. Strong computer skills with emphasis on Microsoft Office and ERP systems required. MANE offers industry leading benefits including a generous PTO plan. Additional benefits include paid holidays, annual year-end shut down, annual and bi-weekly 401(k) contributions, tuition reimbursement, paid parental leave, employee assistance programs and many more. MANE is known for having a culture that focuses on our employees and their well-being. See for yourself why our employees love working at MANE! MANE is an equal opportunity employer. 2-2-3 schedule 5 pm - 5:30 am (3rd shift) every other weekend.

MANE is a 5th generation French family-owned business known for innovation and progress in the world of Flavor and Fragrance. As sensation enthusiasts, we strive to provide exceptional moments in people's daily lives through the timeless flavors and fragrances we create. With our passion, creativity, and innovation, “We capture what moves”.

Custom Assembly, Inc. specializes in the assembly, warehousing, and distribution of recreational vehicles. We are a family run organization that has been in business for 30+ years. This position entails general warehouse duties including but not limited to loading recreational vehicles onto trucks in a non-climate-controlled warehouse. Close attention to detail and care with our customer's vehicles is vital. Our goal is to have showroom-floor ready vehicles available to dealers upon arrival. Pay: $19.99 Benefits : Health Insurance (After a 30-day probationary period) Dental Insurance (After a 30-day probationary period) Vision Insurance (After a 30-day probationary period) Company Paid Life Insurance (After a 90-day probationary period) Paid time off (40 hours accrued upon completion of one year of service, 40 hours of unpaid time available immediately) Holidays (After a 90-day probationary period) 401k (After a 90-day probationary period) Schedule: This is a full-time Monday - Friday, with possible overtime. 2nd shift Job Description: Daily tasks will include but not be limited to: Ability to safely operate material handling equipment to move materials to and from storage, and load and unload trailers Manually move units and material from receiving to the warehouse in an efficient, effective and safe manner. Secure units with strapping to prevent unit damage or shifting in transit Experience: Forklift experience will be a plus 2-3 years experience. Custom Assembly is an Equal Opportunity Employer who participates in the E-Verify process. We are a Drug Free Workplace. Criminal Background Report and Drug screenings will be completed prior to employment. Custom Assembly offers Medical, Dental, and Vision benefits and a 401K with company match.

Custom Assembly, Inc. specializes in the assembly, warehousing, and distribution of recreational vehicles. We are a family run organization that has been in business for 30+ years. This position entails general warehouse duties including but not limited to loading recreational vehicles onto trucks in a non-climate-controlled warehouse. Close attention to detail and care with our customer's vehicles is vital. Our goal is to have showroom-floor ready vehicles available to dealers upon arrival. Pay: $19.99 Benefits: * Health Insurance (After a 30-day probationary period) * Dental Insurance (After a 30-day probationary period) * Vision Insurance (After a 30-day probationary period) * Company Paid Life Insurance (After a 90-day probationary period) * Paid time off (40 hours accrued upon completion of one year of service, 40 hours of unpaid time available immediately) * Holidays (After a 90-day probationary period) * 401k (After a 90-day probationary period) Schedule: This is a full-time Monday - Friday, with possible overtime. 2nd shift Job Description: Daily tasks will include but not be limited to: * Ability to safely operate material handling equipment to move materials to and from storage, and load and unload trailers * Manually move units and material from receiving to the warehouse in an efficient, effective and safe manner. * Secure units with strapping to prevent unit damage or shifting in transit Experience: Forklift experience will be a plus 2-3 years experience. Custom Assembly is an Equal Opportunity Employer who participates in the E-Verify process. We are a Drug Free Workplace. Criminal Background Report and Drug screenings will be completed prior to employment. Custom Assembly offers Medical, Dental, and Vision benefits and a 401K with company match.

Custom Assembly, Inc. specializes in the assembly, warehousing, and distribution of recreational vehicles. We are a family run organization that has been in business for 30+ years. This position entails general warehouse duties including but not limited to loading recreational vehicles onto trucks in a non-climate-controlled warehouse. Close attention to detail and care with our customer's vehicles is vital. Our goal is to have showroom-floor ready vehicles available to dealers upon arrival. Pay: $18.96 Benefits : Health Insurance (After a 30-day probationary period) Dental Insurance (After a 30-day probationary period) Vision Insurance (After a 30-day probationary period) Company Paid Life Insurance (After a 90-day probationary period) Paid time off (40 hours accrued upon completion of one year of service, 40 hours of unpaid time available immediately) Holidays (After a 90-day probationary period) 401k (After a 90-day probationary period) Schedule: This is a full-time Monday - Friday, with possible overtime. Job Description: Daily tasks will include but not be limited to: Ability to safely operate material handling equipment to move materials to and from storage, and load and unload trailers Manually move units and material from receiving to the warehouse in an efficient, effective and safe manner. Secure units with strapping to prevent unit damage or shifting in transit Experience: Forklift experience will be a plus 2-3 years experience. Custom Assembly is an Equal Opportunity Employer who participates in the E-Verify process. We are a Drug Free Workplace. Criminal Background Report and Drug screenings will be completed prior to employment. Custom Assembly offers Medical, Dental, and Vision benefits and a 401K with company match.

Job DescriptionSalary: $19.89 A&A Safety, Inc. is a leading provider in traffic safety, dedicated to ensuring public safety on highways and roadways. As a family-owned business, we prioritize the safety and well-being of our employees, fostering teamwork to deliver outstanding products and services to our customers. Our offerings include traffic control, pavement marking, construction and roadway signage, traffic control devices, personal protective equipment, and graphic design services. A&A Safety, Inc. is currently seeking dependable, energetic, and highly motivated individuals with a positive attitude and strong work ethic to join our team as a Yard Laborer. Responsibilities: Preparing and loading trucks with materials. Moving materials within the yard and warehouse. Performing pick-ups and deliveries of materials. Maintaining organization of inventory in the yard and warehouse. Clean and Repair yard equipment, vehicles and yard property & structures as needed. Ability to work outdoors in incremental weather conditions. Must be able to lift 50lbs continuously. Requirements: A valid drivers license. High school diploma or GED. Additional Information: This role offers ample opportunities for learning and advancement within the A&A Safety team. A pre-employment drug screening is mandatory, as we maintain a drug-free workplace. Candidates must consent to driving record verification and/or background checks. A&A Safety, Inc. is committed to affirmative action and equal employment opportunities for all. Application Process: Please apply now if you wish to be part of the A&A Safety winning team! No phone calls, please.

Job Description At NPAA, we believe our employees are our greatest strength. We are proud to offer a generous and competitive rewards package, including: Earned Bonus Structure - attendance bonuses, annual merit increases, and an annual incentive bonus plan. Time Off & Holidays - 11 paid holidays each year, plus paid time off to support work-life balance. Health & Retirement - comprehensive health and welfare plans, along with a 401(k)program featuring an exceptional company match. Career Growth & Recognition - tuition reimbursement, employee recognition programs, and opportunities to grow within the organization. Culture & Community - as part of the NPAA family, you'll enjoy company events throughout the year celebrating and appreciating our employees' hard work and dedication. POSITION SUMMARY: This position is responsible for ensuring the efficient movement of incoming and outgoing raw materials and finished products, as well as coordinating material flow throughout the warehouse and storage areas. The role supports overall operational efficiency by maintaining organized inventory handling and timely distribution. **POSITION RESPONSIBILITIES: ** Performs tasks in accordance with standard operating procedures (SOPs) for material movement. Loads and unloads materials as directed. Ensures proper staging of raw materials and finished goods. Stocks materials according to warehouse storage layout and design. Cleans assigned work areas, including 6S, racking, tool boards, and warehouse equipment. Utilizes daily warehouse pick sheets/lists to identify and retrieve necessary materials. Scans raw materials and finished goods to proper locations when directed. Notifies direct supervisor of any discrepancies. Participates in manufacturing and operational improvement discussions. Attends all company‑sponsored training programs as required. POSITION QUALIFICATIONS: High school diploma or GED required. 1-3 years of warehouse experience or related experience. Ability to work independently with minimal supervision. Ability to lift up to 50 lbs. Must be able to operate a forklift and obtain certification. SALARY RANGE: $15.81to$23.41 hourly. Compensation for this role is negotiable based on experience and skill set. Nippon Paint Automotive Americas Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary info: $15.81 - $23.41 / hr

Primarily interfaces with production, transportation, and sales departments, with periodic interface with all other departments. Follows company policies and procedures to ensure product is properly handled accounted for and inventoried. Arrives on or before scheduled start time to properly review duties for the day. Physically handles product, materials and equipment (racks, pallets, pallet jacks, etc.) to assist in the distribution of bread and cake products; may include traying, racking, positioning of empty/full racks, loading/unloading of vehicles. Monitors product quality according to company standards (proper size, color texture, slicking, packaging, etc.); keeps equipment and area neat, clean, and orderly. Properly wears personal protective equipment as supplies and directed by the company; wears uniforms/clothing in accordance with GMP's/company standards. Counts/breaks down product per orders/invoices to ensure the proper distribution of product report overage/shortage discrepancies to supervisor. Uses company established procedures to safely load/unload product on route trucks, tractor trailers or other vehicles for distribution to depots and consumers; includes proper securing/booming of loads; includes handling of empty pallets/racks used in the distribution process. May include non-product equipment/supplies for depots. Communicates/coordinates with others to maintain and assure proper predict flow; assists other members of the bakery team where needed (breakdown, emergencies, etc.). Performs other functions as required by plant supervision, practices and complies with all company policies and procedures, including safety and other work rules. **Please note that this job profile is not meant to be all inclusive of the responsibilities of this position; individuals may perform other duties as assigned or required.**

Job Description As a Reversing Mill Operator at Steel Technologies, you will plan machines to mill steel, align parts and pieces for production equipment, set equipment controls, and monitors equipment. It's important for you to be detailed and consistent in order to ensure only the best result for our customers. We rely on this position to continuously meet quality and customers standards. How you'll contribute to our company: Make mill set-up including work roll changes to ensure compliance with production instructions Reconcile coil identity to production and load coil Set-up Automatic Gauge Control (AGC) system Thread coil through mill, cropping non-compliance material Assure material compliance with all order instructions Document all inspection data Monitor coil for shape, finish, gauge (using AGC) running at maximum line speed to assure with order compliance Check gauge and surface when coil is finished Band/secure coil and identify coil in compliance with production Attach histogram to production as required from AGC Remove finished coil from recoiler Organize complete production documentation at order end and record production information, ensure accuracy Remove scrap from machine Clean machine and entire area Here's what we can offer: Medical, Dental, and Vision after 60 days of employment Competitive Wellness Program, providing up to 100% discount on medical premiums Short-Term and Long-Term Disability Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer Employer-Paid Life Insurance 401(k) after 60 days of employment + competitive match after one year Paid Time Off starting after 90 days of employment Paid Holidays starting day one! Health Savings Account and Flexible Spending Account Great discount programs in automotive, technology, and more Boot and Glasses Allowance after 60 days of employment Free uniforms after 60 days of employment Monthly Incentive Bonus after one full month of employment Education Assistance is available for job related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications Career Advancement Opportunities Teammate Assistance Program (TAP) which offers professional assistance for Counseling, Financial, Legal, and Family services Here's what is needed to be successful: Ability to perform complete set-up and operational tasks of rolling to ensure compliance with customer specifications and production requirements Ability to use tape measures and micrometers Ability to comply with safety rules and requirements Ability to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds Steel Technologies is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

As a Reversing Mill Operator at Steel Technologies, you will plan machines to mill steel, align parts and pieces for production equipment, set equipment controls, and monitors equipment. It's important for you to be detailed and consistent in order to ensure only the best result for our customers. We rely on this position to continuously meet quality and customers standards. How you'll contribute to our company: * Make mill set-up including work roll changes to ensure compliance with production instructions * Reconcile coil identity to production and load coil * Set-up Automatic Gauge Control (AGC) system * Thread coil through mill, cropping non-compliance material * Assure material compliance with all order instructions * Document all inspection data * Monitor coil for shape, finish, gauge (using AGC) running at maximum line speed to assure with order compliance * Check gauge and surface when coil is finished * Band/secure coil and identify coil in compliance with production * Attach histogram to production as required from AGC * Remove finished coil from recoiler * Organize complete production documentation at order end and record production information, ensure accuracy * Remove scrap from machine * Clean machine and entire area Here's what we can offer: * Medical, Dental, and Vision after 60 days of employment * Competitive Wellness Program, providing up to 100% discount on medical premiums * Short-Term and Long-Term Disability * Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer * Employer-Paid Life Insurance * 401(k) after 60 days of employment + competitive match after one year * Paid Time Off starting after 90 days of employment * Paid Holidays starting day one! * Health Savings Account and Flexible Spending Account * Great discount programs in automotive, technology, and more * Boot and Glasses Allowance after 60 days of employment * Free uniforms after 60 days of employment * Monthly Incentive Bonus after one full month of employment * Education Assistance is available for job related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications * Career Advancement Opportunities * Teammate Assistance Program (TAP) which offers professional assistance for Counseling, Financial, Legal, and Family services Here's what is needed to be successful: * Ability to perform complete set-up and operational tasks of rolling to ensure compliance with customer specifications and production requirements * Ability to use tape measures and micrometers * Ability to comply with safety rules and requirements * Ability to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds Steel Technologies is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

At Tenaris, you will join a global network of professionals working together toward a common goal: shape the future of energy through advanced tubular products and services. If you want to become part of a diverse team that values results, analytical approach to problem solving and teamwork, Tenaris is the place for you. Heavy Lift Operator LOCATION: Brookfield Township - Ohio - USA DEPARTMENT: INDUSTRIAL OPERATIONS **Requires working 2nd Shift 4PM - 2AM** Performs the operation of Premium threading on pipes in a safe and efficient manner according to applicable procedures, complying with defined quality standards. Main Responsibilities - Executes change over and set up of the machine. - Performs lathe operation. - Performs Premium threads on pipes or couplings. - Carries out end deburring. - Performs chips cleaning. - Changes machine tools. - Assists machine lock outs and tag outs and does operative maintenance (cooling fluid, machine adjustments, etc.). - Updates information in the tracking systems. Hiring in addition for other operations roles - Entry level and up. Job Type: Full-time Benefits: 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Vision insurance If your experience and knowledge match our requirements, please apply Tenaris is an equal opportunity employer, valuing diversity in employment. We thank all candidates for their interest, however, only those that match the criteria required for the desired profile will be contacted . Visit our Careers Page Follow us on LinkedIn Follow us on Glassdoor Like us on Facebook Follow us on Instagram

At Tenaris, you will join a global network of professionals working together toward a common goal: shape the future of energy through advanced tubular products and services. If you want to become part of a diverse team that values results, analytical approach to problem solving and teamwork, Tenaris is the place for you. Heavy Lift Operator LOCATION: Brookfield Township - Ohio - USA DEPARTMENT: INDUSTRIAL OPERATIONS Requires working 2nd Shift 4PM - 2AM Performs the operation of Premium threading on pipes in a safe and efficient manner according to applicable procedures, complying with defined quality standards. Main Responsibilities * Executes change over and set up of the machine. * Performs lathe operation. * Performs Premium threads on pipes or couplings. * Carries out end deburring. * Performs chips cleaning. * Changes machine tools. * Assists machine lock outs and tag outs and does operative maintenance (cooling fluid, machine adjustments, etc.). * Updates information in the tracking systems. Hiring in addition for other operations roles - Entry level and up. Job Type: Full-time Benefits: * 401(k) matching * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Parental leave * Vision insurance If your experience and knowledge match our requirements, please apply Tenaris is an equal opportunity employer, valuing diversity in employment. We thank all candidates for their interest, however, only those that match the criteria required for the desired profile will be contacted. Visit our Careers Page Follow us on LinkedIn Follow us on Glassdoor Like us on Facebook Follow us on Instagram Location: Brookfield Township, Ohio, USA Date: Dec 20, 2025

Job Description Night Shift Chemical Flaking Stand-up Forklift Operator Reporting directly to the Flaking Supervisor, the Chemical Flaking Stand-up Forklift Operator 1 is responsible for performing all required duties and operating all necessary equipment to ensure the continuous and effective operation of the Flaking department in order to meet stated production goals while maintaining safety and quality standards. Schedule: 2-2-3 Rotation (Work 2 days, off 2 days, work 3 days, repeat) This schedule includes working every other weekend. POSITION REQUIREMENTS Education, Credentials, Licenses: A High School Diploma, GED, or earning within a designated period of time following date of hire. Kind & Length of Experience: 1 year of stand-up forklift experience is required; 2+ years preferred 1 year of continuous work history with a company required; 1 year of experience in a manufacturing environment preferred. Physical Requirements: Able to work in ambient temperatures (high and low); Able to work a 12-hour shift with rotating schedule; Able to change elevation using ramps, stairs, and ladders; Able to stand and walk for extended periods (e.g., greater than one hour); Able to independently lift up to 50 pounds on a frequent basis during shift; Able to work overtime as needed. PERFORMANCE MEASURES AND STANDARDS Operate material handling equipment, including but not limited to forklift; Transport supersacks into warehouse storage after processing; Operate equipment (e.g., supersack machine, filling machine); Perform washouts and changeovers of facilities and equipment; Perform and follow all procedures, including proper documentation, of manufactured product; Maintain housekeeping requirements; Maintain 5S (i.e., sort, set in order, shine, standardize, sustain) standards; Perform autonomous maintenance, including cleaning, inspecting, lubricating, and tightening to maintain equipment base condition; Perform basic computer tasks; Transfer inventory through electronic scanning and required paperwork; Lead or support continuous improvement activities through established methods; Follow all safety, environmental, and quality policies and procedures; Act and be safe at all times; Understand and adhere to all task, departmental, site, and company safety rules or standards Assist in maintaining a safe work environment; Comply with all customer, regulatory, and quality requirements in the performance of all tasks as set forth in the company's policies and procedures; Keep equipment and work area clean and organized; Adhere to all Environmental, Health, Safety, Security Requirements covered under Local State and Federal Regulations; Follow all RC14001 guiding principles, policies, procedures and other requirements; Maintain Hazardous waste in accordance to all Local, State and Federal Regulations; Other duties as requested. Why You'll Love Working at Cremer North America: Work-Life Balance: Work just 15 days a month with our unique shift schedule. Retirement Benefits: 401K with company match and profit-sharing (up to 9%). Time Off: Vacation, 10 paid holidays, and personal days to recharge. Annual Bonus: Earn up to $2,000 each year. Attendance Rewards: Perfect attendance is rewarded. Career Growth: Skill-based raises and advancement opportunities. Tuition Assistance: We help you invest in your future. Extra Pay: Overtime is available. Referral Bonus: Earn up to $1,500 by referring friends and family. Peter Cremer Training Required: We will follow the company's written training program for this position. Customer Service, Teamwork & Code of Conduct: Maintain a safe, legal, and environmentally protective operation; Listen to our customers, suppliers, and employees; Respond quickly to customer concerns; Follow set guidelines for Good Manufacturing Practices (GMP), quality, and food safety requirements; Maintain training on applicable procedures in quality, GMP, and food safety; Report any food safety, security, and / or quality issues to management or the Hazard Analysis and Critical Control Points (HACCP) team to initiate action; Provide flexible and innovative strategies to support new business opportunities; Be cost effective in the utilization of our resources, thereby contributing to the profitability of Peter Cremer North America, LP and our customers; Strive for continuous improvement; Willing and eagerness to learn; Maintain positive “Can Do” attitude. We are an equal opportunity employer. Applicants are considered for positions without regard to sex, race, color, ancestry, religion, national origin, disability, age, marital status, disabled veteran or Vietnam era veteran status, genetic information, sexual orientation, pregnancy, including childbirth or any related condition, gender identity or expression, citizenship, or any other characteristic protected by applicable state, federal or local laws. 7:00pm - 7:30am (2-2-3 schedule) Will work every other weekend