Top Mold Injection Operator Skills

Below we've compiled a list of the most important skills for a Mold Injection Operator. We ranked the top skills based on the percentage of Mold Injection Operator resumes they appeared on. For example, 38.7% of Mold Injection Operator resumes contained Plastic Parts as a skill. Let's find out what skills a Mold Injection Operator actually needs in order to be successful in the workplace.

The six most common skills found on Mold Injection Operator resumes in 2020. Read below to see the full list.

1. Plastic Parts

high Demand
Here's how Plastic Parts is used in Mold Injection Operator jobs:
  • Set up, operate, or tend casting machines to mold or cast plastic parts or products.
  • Operated press to mold plastic parts to employer specifications and perform other duties as assigned.
  • Pulled plastic parts from machine, inspected, corrected and packaged/placed on pallets.
  • Packaged plastic parts at a rate of [number] per hour.
  • Look for defects on plastic parts that came out of a machine.
  • Operated Injection Mold Machines, Painted Plastic Parts, Assembled Plastic Parts
  • Change Molds for various Plastic Parts, production count for shipping.
  • Molded and machined plastic parts via sonic welders and heat stakes
  • Insured quality of plastic parts made in mold.
  • Trimmed plastic parts and checked them for defects.
  • Mold and Extrude various Plastic parts for assembly.
  • Operate machines making plastic parts for vehicles.
  • Inspected, trimmed and packaged plastic parts
  • Trimmed plastic parts as needed.
  • Inspect plastic parts from machine.
  • Inspected plastic parts for quality.
  • Assembled plastic parts, cut flashings, labeled parts, and boxed completed parts to be taken to quality control.
  • Completed housekeeping and maintenance duties in the production area.Packaged plastic parts at a rate of 60 per hour.
  • Operated up to 11 injection molding machines making plastic parts Worked in an 8 member team
  • Trim, inspect, pack and label plastic parts Run open door machines

Show More

2. Inspect Parts

high Demand
Here's how Inspect Parts is used in Mold Injection Operator jobs:
  • Run plastic injection molding machines * Inspect parts for quality control; Document each process and record requested customer data.
  • Run injection mold machines, inspect parts, trim flash from parts, inspect for splay shorts burns and package parts
  • Inspect parts as they come off of conveyor to make sure product meets customer standards and quality.
  • Inspect parts and package them, mix material, answer alarms on presses
  • Inspect parts and preform secondary operations while the machine is cycling.
  • Operate injection foam machine, trim and inspect parts.
  • Cut parts off gate, inspect parts and package.
  • Inspect parts for defects and trim extra plastic.
  • Machine operator inspect parts trim then pack.
  • Check and inspect parts for defects
  • Inspect parts and package them.
  • Run Machine, Clean-UP, Inspect parts for G.M.
  • Unload finish product from conveyer belt, inspect parts, package into containers or boxes and place into warehouse
  • Produce parts for medical purposes, inspect parts, performed dimension checks, package and lable parts.
  • Inspect parts with microscope, measure defects with the reticle, and trimming gates/flash if needed.
  • run injection molding press and inspect parts keeping plastic tanks full and sweeping and cleaning shop.
  • Inspect parts and assembly on some of the parts and pack in totes.
  • Assemble and inspect parts on the machine Prepare and pack for shipment
  • Trim flash from plastic parts Inspect parts pack and label
  • Inspect parts to ensure that they meet company standards.

Show More

3. Mold Parts

high Demand
Here's how Mold Parts is used in Mold Injection Operator jobs:
  • Worked in assembly assembling honda parts and also injection mold parts as well as ran operations on machines .
  • Cleaned, finished, and lubricated molds and mold parts; set the proper operating temperature for each casting.
  • Stacked mold parts in boxes or on conveyors for further processing.
  • Mold parts, first and last piece inspection, mix materials
  • Load and remove mold parts from 2000 degree oven.
  • Cast mold parts into shell and press them.

Show More

4. Safety Procedures

high Demand
Here's how Safety Procedures is used in Mold Injection Operator jobs:
  • Adapt operational knowledge and safety procedures when switching to different ovens.
  • Follow and adhering to safety procedures for daily operations.
  • Operated machinery in accordance with all safety procedures.
  • Gained experience in an industrial environment, mass production, manufacturing equipment, and safety procedures
  • Follow and continually monitor established safety procedures to ensure a clean and safe work environment.
  • Performed all work in accordance with quality standards and established safety procedures.

Show More

5. Injection Mold Operator

high Demand
Here's how Injection Mold Operator is used in Mold Injection Operator jobs:
  • Blow mold/injection mold operator *Final Inspector *Material Handler
  • Fulfilled orders for a wide variety of bow and crossbow dampeners as an injection mold operator.
  • Worked as plastic injection mold operator on press line.
  • Blow mold, injection mold operator.
  • Worked as injection mold operator for7yrs.
  • Light Industrial Visually inspected molded caps from the injection mold operator and prepared them to be shipped out.
  • Worked as a injection mold operator for Baxter enterprises.
  • Job Duties Experience in forklift operation Line duties Warehousing Packaging and handling of materials Injection mold operator

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Final Inspection

high Demand
Here's how Final Inspection is used in Mold Injection Operator jobs:
  • Performed final inspection of finished product, adhering to quality and quantity objectives.
  • Performed final inspection per quality assurance specifications on various equipment.
  • Followed working instructions and performed final inspection before shipping.
  • Performed in-process in final inspection and final packaging.
  • Machine operator, Assembly of medical products, final inspection, Inventory, Sorting, Labeling, Mark & Pack.
  • Adapted quickly to all work stations for the assembly of the finished product, including final inspection and packaging.

Show More

7. Quality Checks

high Demand
Here's how Quality Checks is used in Mold Injection Operator jobs:
  • Assembled parts for Honda, ran injection mold machines, and did quality checks for parts to be shipped.
  • Performed routine quality checks on parts during production, through usage of measuring instruments provided.
  • Completed all mold changes and responsible for start up and first piece quality checks.
  • Do quality checks on all materials and input quality data as required.
  • Performed hourly quality checks on parts to assure accurate output.
  • Performed quality checks to ensure customer quality was met.
  • Performed quality checks hourly or more frequently as needed.
  • Operate Husky molding machines and due Quality checks.
  • Used company instruments to complete quality checks.
  • Performed quality checks every 15 min.
  • Do quality checks of the parts.
  • Utilized forklift for transportation of material Used Blue prints for setup of machines and Quality checks.
  • managed quality checks every hour to insure production was running well.
  • fix quality and injection press issues and do quality checks
  • Performed Quality checks for weight and specific measurements.
  • Do quality checks and weight checks every hour for Lost Foam, Kurtz and Hirsch.

Show More

8. Excess Material

high Demand
Here's how Excess Material is used in Mold Injection Operator jobs:
  • Remove finish cure parts from molds using hand tools, air hoses and/or equipment, trim or remove excess material.
  • Trim excess material form parts, using knives and grind scrap plastic into power for reuse.
  • Trim excess material from parts, using knives and other trimming tools.
  • Trimmed excess material from work pieces with knives and band saws.
  • Trimmed excess material from parts, using knives.
  • Trim excess material from parts using different tools.
  • Removed finished products from dies with hand tools * Trimmed excess material from parts using knives
  • Mix catalysts and coloring pigments.Cut off excess material repair and maintain machine.
  • Positioned and secured workpieces on machine Trimmed excess material from parts.
  • Set up and operated injection-molding machines.Trimmed excess material from parts using knives.Executed proper knowledge and application of machine codes.
  • Cut the excess material from the plastic injection molds for recycling Assisted in the manufacture of kayaks Performed shipping and receiving duties
  • Check process Measure parts with calipers First piece approval Start up and shut down mold Separate parts from excess material

Show More

9. Quality Standards

high Demand
Here's how Quality Standards is used in Mold Injection Operator jobs:
  • Machine operator transfer raw materials finished products ensure all quality standards are met
  • Completed ongoing inspection of items to ensure quality standards met and maintained.
  • torched, trimmed parts to meet quality standards, set up different machine molds while there also.
  • Run and maintain injection molding machines Maintain quality standards Responsible for changing dies for injection tooling
  • Maintain Quality standards for customer satisfaction * Cut material scap costs 17% annually.
  • Maintain quality standards by approving material at in-process inspection for all products verify conformance to specified dimensions.

Show More

10. Injection Mold Press

high Demand
Here's how Injection Mold Press is used in Mold Injection Operator jobs:
  • Operated large format injection mold press to manufacture automotive gaskets.
  • Stock the injection mold press with raw material and components to produce a finished good part.
  • Operate injection mold press, taking parts from machine, inspecting and packaging part.
  • Trim, assemble, and package product released from injection mold presses.
  • Operated injection mold press, grinder, and counted parts.
  • Inspected automotive parts coming off the injection mold press
  • Produce various auto components using injection mold press.
  • Operate injection mold presses that produce parts.
  • Loaded and unloaded injection mold press.
  • Operated an injection mold press.
  • Operated injection mold presses and assembled products Production setup
  • Operated injection mold press machine Followed quality and process protocols Maintained high volume work flow

Show More

11. Hand Tools

high Demand
Here's how Hand Tools is used in Mold Injection Operator jobs:
  • Operate hand tools, including trimming knives and rubber mallets as well as sanders, drills and band saws.
  • Measure and calibrate die to specifics on order using small hand tools.
  • Trimmed plastics auto parts using hand tools.
  • Repaired and maintained machines and auxiliary equipment, using hand tools and power tools.
  • Use of a variety of hand toolsrelated to production process.
  • Operated automatic compression/sonic weld machines and used various hand tools to assemble various components into finished product.

Show More

12. Set-Up

high Demand
Here's how Set-Up is used in Mold Injection Operator jobs:
  • Inspected parts ever thirty minutes for defects and packed off the parts to help the set-ups.
  • Performed Set-Up and Changeover of Metal Roll-form Tooling and Dies on 30 Ton Cut-off press.
  • Served as set-up operator for die setter operations, and trouble shooting.
  • Assisted on set-ups and tear downs of dies.
  • Worked in a team environment performing visual and dimensional inspection Performed set-ups adjustments and operated a variety of production equipment.
  • Operated and set-up various assembly and automatic bagging machines and adjusted as necessary for conformance to specifications.

Show More

13. Assembly Line

high Demand
Here's how Assembly Line is used in Mold Injection Operator jobs:
  • Performed assembly line packaging of plastic products supply plastic solution for the mold injection machinery, operate mold injection machinery.
  • Determined conditions impeding flow of work on assembly line and notify responsible personnel that corrective action is necessary.
  • Assembled various partial /final assembly automobile wiring harnesses, both on an assembly line and individual basis.
  • Machine Operator Light - Paced and operated assorted assembly machines on various assembly lines.
  • Worked on an assembly line making injection molding parts for GM.
  • Operate automated assembly line in the production of toner cartridges.
  • Worked on and operated a mold-filling assembly line.
  • Started out as an assembler and then became a stocker and a packer for the assembly lines.
  • Learn mulitple job functions to rotate on assembly line and increase production knowledge.
  • Motivated assembly line to achieve daily parts quota.
  • Porduced bumber shells for the Hyundai Sonata which was cooled of and put on assembly line for production.

Show More

14. Cast Parts

high Demand
Here's how Cast Parts is used in Mold Injection Operator jobs:
  • Tended plastic molding, casting, or core making machines to mold or cast parts or products.
  • Produced cast parts using Prince die casting machine with the help of a robot with motorman controls.
  • Operate die casting machine to cast parts such as fly wheels and gas stove burners.
  • Set up and operated die casting machine to cast parts, such as automobile components,
  • Pulled levers to close dies and inject plastic into dies to cast parts.
  • Produce high quality cast parts for gas stoves, set up machines.

Show More

15. Machine Operation

average Demand
Here's how Machine Operation is used in Mold Injection Operator jobs:
  • Weighed completed work pieces to determine accuracy of machine operation.
  • Key Contributions: Perfect attendance, assisted management on setting new machine rates and standards on key machine operations.
  • Check to ensure that work pieces are properly cooled during machine operation.
  • Trained new employees on proper and safe machine operation and factory standards.
  • Machine operation, trimming medical parts, counting and packaging parts.
  • Lean manufacturing., Manufacturing process cross training., Machine operations., Manufacturing assembly standards and procedures.

Show More

16. Troubleshoot

average Demand
Here's how Troubleshoot is used in Mold Injection Operator jobs:
  • Operate and troubleshoot Thermal Injection presses manufacturing household plastic goods.
  • Operated injection molding machine and performed troubleshooting when necessary.
  • Assist in maintenance and advanced troubleshooting of machinery.
  • Diagnose and troubleshoot equipment related processing issues.
  • Construct, install, maintain, repair, calibrate, and troubleshoot electronic test equipment, electronic circuitry and instrumentation.
  • Operated and troubleshoot various types of molding and injection machines and molding parts according to client's specifications.
  • Provided efficient troubleshooting and problem solving in the infant state to fix issues safely and quickly.
  • Solve rejects by troubleshooting process, molds, and equipment problems or defects.
  • Set molds, change molds, calibrate, troubleshoot and set up.
  • Maintained the presses and troubleshoot the machines as needed when errors occurred.
  • Conduct daily troubleshooting process on Husky and Cincinnati Injection Mold machines.
  • Performed troubleshooting; maintained machines and made minor repairs to equipment.
  • Troubleshooted all machine issues to minimize scrap while maintaining quality.
  • Perform troubleshooting in the machines and basic resets.
  • Inspected parts, troubleshooting machines, and soldering.
  • Do some minor troubleshooting on the machine.
  • Troubleshooted machines in a timely manner to ensure proper production as well as greatly minimized deficiencies.
  • run presses, trim parts, help troubleshoot problems with robotic router and the press
  • Trim, pack, troubleshoot, maintain uptime on injection mold machines and automated cells
  • Operate, troubleshoot, and perform maintenance on Husky Hycap 300 and Hypet 500 plastic molding machines.

Show More

17. Inspect Products

average Demand
Here's how Inspect Products is used in Mold Injection Operator jobs:
  • Inspect products to verify conformance to specifications.
  • Inspect products that come down the line for any type of defect.
  • Cut off excess material, inspect products once it come off the machine belt.
  • Operate compression or injection molding machines Inspect products for surface defects and flaws Eliminate production of defective parts and products
  • watch machines, inspect products, test products, clean scrap, ect
  • Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.

Show More

18. Thermoplastic Materials

average Demand
Here's how Thermoplastic Materials is used in Mold Injection Operator jobs:
  • Mixed thermoplastic materials and coloring pigments into machine.
  • Set up and operated injection-molding machines to cast products from thermoplastic materials.
  • Mixed thermoplastic materials and coloring pigments in mixing machine, according to formula.
  • Set up and operates injection-molding machines to cast products from thermoplastic materials.
  • Mix thermoplastic materials and coloring pigments in mixing machine, according to formula.
  • Operate injection molding machine to cast products from thermoplastic materials.

Show More

19. Car Parts

average Demand
Here's how Car Parts is used in Mold Injection Operator jobs:
  • Operated mold injection machines that built different car parts, then I gauged, inspected and packaged parts for shipment.
  • Managed and operated molding press for interior car parts.
  • Operate an injection mold which made plastic car parts
  • Operated Plastic Injection Mold to make car parts.
  • Serviced car parts in Injection Molding.
  • Check car parts make sure they were the right size, clean, nice, no errors on them!
  • Inspected details of car parts ensuring that there were no dents, splays, or scratches.
  • Loaded, unloaded, trimmed, inspected, gaged and packed plastic car parts.
  • Make different car parts for Niaasn
  • Operated a press for various plastic car parts Inspected parts for quality assurance Responsible for packing and shipping according to policy

Show More

20. Raw Materials

average Demand
Here's how Raw Materials is used in Mold Injection Operator jobs:
  • Worked closely with material handler to ensure proper raw materials in area and ongoing availability of materials.
  • Supply plastic injection molding machines with various types of raw materials.
  • Mixed plastics and formed products from raw materials according to specifications.
  • Load machine with raw materials.
  • Gained valuable experience working in a manufacturing environment Responsible for turning manufacturer's raw materials into a finished product
  • Examined, inspected and measured raw materials and finished products to verify conformance to specifications.

Show More

21. Product Quality

average Demand
Here's how Product Quality is used in Mold Injection Operator jobs:
  • Performed various lab test and analysis related to product quality as required.
  • Maintained product quality by continually conducting QA tests following SOP s. Minimized rejects by promptly alerting supervisor of any quality problems.
  • Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, or product quality.
  • Maintained communication with other operators, supervisors, and management to ensure product quality and to rectify any problems.
  • Maintained communication with technicians, supervisors, and operators to ensure product quality and to rectify problems.
  • Ensured all product quality parameters were fully adhered Responsible for properly recording all production numbers into MDIS systems

Show More

22. Ensure Conformance

average Demand
Here's how Ensure Conformance is used in Mold Injection Operator jobs:
  • Measured dimensions of finished work pieces to ensure conformance to specifications,using precision measuring instruments, templates, and fixtures.
  • Measure and visually inspect products for surface and dimension defects in order to ensure conformance to specifications, using precision measuring instruments
  • Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
  • Observed and monitored production operations and equipment to ensure conformance to specifications.
  • Repaired electrical components to correct defects and ensure conformance to specifications.
  • Weighed products to ensure conformance to specifications.

Show More

23. Continuous Operation

average Demand
Here's how Continuous Operation is used in Mold Injection Operator jobs:
  • Observed continuous operation of machines.
  • Observed continuous operation of machines.
  • Observed continuous operation of machines.
  • Observed continuous operation of machines.
  • Observed continuous operation of machines.
  • Observed continuous operation of machines.

Show More

24. Automatic Machines

average Demand
Here's how Automatic Machines is used in Mold Injection Operator jobs:
  • Monitored operation of automatic machines to ensure that products met specifications and detected jams or malfunctions, making adjustments as necessary.
  • Observed continuous operation of automatic machines to ensure that products met specifications; detected malfunctions and made adjustments as necessary.
  • Observe continuous operation of automatic machines to ensure that products meet specifications.
  • Observe automatic machines to ensure that products meet specifications, making adjustments as necessary.
  • Run fast paced automatic machines while assembling parts.
  • Maintained a clean, safe work environment Observed continuous operation of automatic machines.

Show More

25. CNC

average Demand
Here's how CNC is used in Mold Injection Operator jobs:
  • Worked with CNC, Press & Brake metal machines.
  • Second operation operator.Utilization of microscope, impact press, reamer, and CNC lathe.
  • Provided group leadership for third shift crew Set up of liquid injection molding line and CNC Machines Grinding of rollers
  • Mold maker and repair,cnc, press operating, quality control
  • Produced and tested electronic parts utilizing CNC equipment.
  • Operated and retool CNC and conventional manufacturing equipment.

Show More

26. Automotive Parts

average Demand
Here's how Automotive Parts is used in Mold Injection Operator jobs:
  • Operated various injection molding machines producing automotive parts.
  • Check for interior automotive parts for fully molded and labeling.
  • Operated foam injection molds for various automotive parts.
  • Inspected and assembled automotive parts.
  • Operated plastic mold injection machine in the production of automotive parts Inspected parts and structures during all phases of fabrication and assembly
  • Produced plastic automotive parts for Chrysler and GM using state of the art injection mold equipment.
  • Operated many different plastic mold injection units for automotive parts, and trained new employees.
  • Assebled and packed plastic automotive parts Maintianed a clean and safe work place Followed quality control proceedures to ensure customer satisfaction

Show More

27. Defective Parts

average Demand
Here's how Defective Parts is used in Mold Injection Operator jobs:
  • Detect defective parts through sampling.
  • Gauge and rework defective parts.
  • Monitored assembly operations and recognized defective parts.
  • Disassembled defective parts and components, such as inaccurate or worn gauges and measuring instruments, using hand tools.
  • Discarded defective parts not meeting specifications.
  • Analyzed and inspected assembly process for defective parts, tools, and equipment, and substandard work.

Show More

28. Detect Jams

average Demand
Here's how Detect Jams is used in Mold Injection Operator jobs:
  • Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams malfunctions making adjustments as necessary.
  • Observed continuous operation of automatic machines to ensure that products met specifications and to detect jams or malfunctions.
  • Observed continuous operations of machines to detect jams and malfunctions.
  • Observe automatic machines to ensure that products meet satisfaction and detect jams or malfunctions.

Show More

29. Mold Changes

average Demand
Here's how Mold Changes is used in Mold Injection Operator jobs:
  • Performed mold changes as necessary to produce required parts per job.
  • Work with Engineers and Leads on mold changes on CNC machines.
  • Clean and remove flashing from parts, assisting on mold changes.
  • Assist Mold Maintenance in mold changes and manufacturing changes.
  • Do mold changes when needed.
  • Clean and remove flashing from parts, assisting on mold changes.As well as minor maintenance to keep machines operating.
  • Start up machines from PMs and changeovers Shutdown machines for mold changes and resin changes.

Show More

30. Surface Defects

low Demand
Here's how Surface Defects is used in Mold Injection Operator jobs:
  • Examined for surface defects, such as dents, felt stiffness and consistency to detect machinery malfunction, trimming flash.
  • Removed cured product from mold, Also inspected products for surface defects and flaws.
  • Examined molded product for surface defects.
  • Train new employee Trimmed molded product for surface defects, such as dents, bubbles, thin areas and cracks.
  • Inspected products for surface defects and flaws while concurrently ensuring conformance to specifications.
  • Examined molded product for surface defects such as cracks and dents.

Show More

31. ISO

low Demand
Here's how ISO is used in Mold Injection Operator jobs:
  • Operate and maintain injection machine/Above Satisfactory rating-asked by supervisor to be a floater to other machines producing various other products
  • Reported all observations of abnormalities to supervisors to endure quality standards were upheld.
  • Worked closely with supervisor, assembly lines and Materials and Logistics Department
  • Communicated all information with Supervisor & conveyed to production team.
  • Performed quality control inspections and reported results to supervisor.
  • Provide relevant information regarding progress to Supervisors.
  • Maintain a positive work atmosphere by behaving and communicating in a manner to get along with co-workers and supervisor.
  • Input data from incoming & outgoing shipments & materials, communicated all information with production department schedulers & supervisors.
  • Assist with other factory operations as needed, and maintain a clean work area per ISO requirements
  • Assist with training of new employees, comply with written work orders and supervisor directives.
  • Job Description: Remove, inspect and package molded parts per customer and ISO-9002 standards.
  • Coordinate with team supervisor and mechanic in operation of 11 Husky Injection machines.
  • Helped my supervisor set-up work stations for each employee on 2nd shift.
  • Commended by supervisors and management for superior work ethic and job performance.
  • Followed ISO 9000 procedures and maintained GM policy and safety regulations.
  • Lead Operator, Supervisor Responsibilities, Daily Job Assigning, Swing Position
  • Documented and communicated all down time to the supervisor.
  • Assist supervisor in assigning operators to presses.
  • Helped the supervisor to give people breaks.
  • Assist the Shift Supervisor, Justin Ganser with identifying root cause of secondary welding operation on press 55.

Show More

32. Dimension Defects

low Demand
Here's how Dimension Defects is used in Mold Injection Operator jobs:
  • Measured and visually inspected products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
  • Measured and visually inspected products for surface and dimension defects.

Show More

33. Grind Scrap Plastic

low Demand
Here's how Grind Scrap Plastic is used in Mold Injection Operator jobs:
  • Grind scrap plastic into powder for reuse.
  • grind scrap plastic into powder for reuse

Show More

34. Production Processes

low Demand
Here's how Production Processes is used in Mold Injection Operator jobs:
  • Selected Highlights: Collaborated with staff to provide needs analysis of safety and production processes.
  • Monitored and adjusted production processes or equipment for quality and productivity.
  • Monitored and adjusted production processes or equipment for quality and productivity.
  • Evaluated production processes and equipment to find opportunities for improvement.
  • Confer with management and conduct surveys to identify training needs based on projected production processes, changes, and other factors.
  • Start machines or equipment in order to begin production processes.

Show More

35. Plastic Powders

low Demand
Here's how Plastic Powders is used in Mold Injection Operator jobs:
  • Dump premixed plastic powders or pellets into hopper, and start machine.
  • dump premixed plastic powders or pellets into hopper and start machine.

Show More

36. Production Goals

low Demand
Here's how Production Goals is used in Mold Injection Operator jobs:
  • Operated large production machinery while maintaining production goals.
  • Utilized communication skills to ensure quality and production goals were consistently met.
  • Planned and paced work efficiently in order to meet daily, weekly, project or production goals.
  • Worked in a fast paced high end production environment to consistently over exceed daily production goals.
  • Provided assistance to other departments with heavy workloads in order to meet production goals.
  • Worked with production line of 30 people to meet hourly and daily production goals.

Show More

37. Excess Plastic

low Demand
Here's how Excess Plastic is used in Mold Injection Operator jobs:
  • Trim excess plastic from components and performed light assembly.
  • Trim tabs and excess plastic material.
  • trimmed excess plastic from parts with utility knife
  • Operated plastic injection molding machines and trimmed excess plastic from parts.
  • Torched, scraped, and swiveled excess plastic off.
  • Removed finished products from the molds and trimmed excess plastic from parts.

Show More

38. SPC

low Demand
Here's how SPC is used in Mold Injection Operator jobs:
  • Operated injection molding equipment Learned SPC checks Became Forklift and CPR certified
  • Performed Statistical Process Control (SPC), including data collection, charts and graphs on my first two parts.
  • Fill out necessary SPC Charts hourly for my production status and tracking periods for an automotive manufacturing plant.
  • Experience with SPC (Statistical Process Controls).
  • Researched and initiated new SPC software (QS Infinity) data collection system.
  • Implemented SPC program and trained Lead Personnel and Inspectors in its use.

Show More

39. Honda

low Demand
Here's how Honda is used in Mold Injection Operator jobs:
  • Assembled Honda parts for 2018 model's.
  • Make plastic interior parts for Honda, Nissan, and Volks Wagon using a 75-1300 ton injection mold machine.
  • Performed small tasks on Nissan & Honda parts, such as..trim, cut, label date stamps, looked for defects..
  • Job Description:I assembled Class "A" surface parts for Honda Motor Company.
  • Operated stamping machine producing molds for Honda and Mitsubishi vehicle headliners.
  • Operated three or more machines simultaneously in the plastic injection molding department of Honda Lock during the facility's second shift.

Show More

40. Air Hoses

low Demand
Here's how Air Hoses is used in Mold Injection Operator jobs:
  • Removed finished or cured products from dies or molds, using hand tools, air hoses and other equipment when necessary.
  • Removed finished or cured products from dies or molds, using hand tools, air hoses, and other equipment.
  • Removed finished product using hand tools, air hoses and other equipment.
  • Removed cured products from molds with hand tools and air hoses.
  • Used air hoses and packed finished product for shipping.
  • Experience with: Air hoses, pressing machines.

Show More

41. Multiple Machines

low Demand
Here's how Multiple Machines is used in Mold Injection Operator jobs:
  • Clean and lubricate assigned machine, load hoppers, troubleshoot problems with molding process on multiple machines
  • Well versed in multiple machines, ranging from wire spooling to air injection sensors.
  • piece rate, inventory, preventive maintenance, recorded time sheets, operated multiple machines simultaneously, quality assurance.
  • Managed and operated multiple machines to promote high quality products and improve product output.
  • Operate and assist with multiple machines that produced multiple industrial products.
  • Worked on multiple machines at one time to create engine and gas valves for foreign car companies.

Show More

42. Toyota

low Demand
Here's how Toyota is used in Mold Injection Operator jobs:
  • Operate Sit-Down Toyota Forklift to inventory product and move gaylord bins.
  • Machine operator and assembler of components associated with the assembly of cylinder head covers for Toyota motor manufacturing.
  • Well know with tack welding/spot welding and metal compression pipe bending for design of seats for Toyota Tundra trucks.
  • Worked as an assembly operator that made quality parts for Toyota.
  • Build, inspect, and package parts built for Toyota vehicles.
  • Assemble parts for Toyota vehicles to be shipped to dealerships.

Show More

43. Osha

low Demand
Here's how Osha is used in Mold Injection Operator jobs:
  • Operated Plastic Injection Molding PressesProvided Breaks for other OperatorsKept Workshop clean while observing OSHA requirements
  • Perform Market Task work to clean MachineryFollows OSHA Safety training rules and regulations while performing job duties.
  • Packaged, palletized and oversaw operations in accordance with OSHA safety standards.
  • Participated in company safety meetings and followed all company regulations including all OSHA guidelines
  • Operated within established OSHA guidelines, Lock-out/Tag-out and other safety/environmental procedures.
  • Required to united laboratory and OSHA guidelines.

Show More

44. Starts Machine

low Demand
Here's how Starts Machine is used in Mold Injection Operator jobs:
  • Premixed plastic powders or pellets into hopper, and starts machine.

Show More

45. SOP

low Demand
Here's how SOP is used in Mold Injection Operator jobs:
  • SOP testing of PET products which included 5 random samples taken from each machine and tested for proper weights & defects.
  • Run 5 black rubber injection machines check quality every hour and clean when sop says so and fill out work orders
  • Inspect, assemble, and pack injection molded parts per SOP work instruction and acceptable appearance criteria.
  • SOP Committee-Helped create and write Sop's for jobs in the plant.
  • Assist the manager in establishing and revising SOP's and work instructions.
  • Insure quality and part specifications are compliance with SOP.
  • Worked on an assembly line that used pneumatic tools and sophisticated light-curtain, safe guarded stations.

Show More

46. Different Types

low Demand
Here's how Different Types is used in Mold Injection Operator jobs:
  • Worked on many different types of plastic injection and below molding presses.
  • Run many different types of plastic injection presses.
  • Perform quality Inspections, keep production records, and pack parts along with Operation of different types machines.
  • Assemble and disassemble lines and machines to produce and package different types of products.
  • Assemble, program, and test different types of networking devices.
  • Worked in assembly department and assembled all different types of physical therapy equipment, met all production requirement.

Show More

47. Customer Specifications

low Demand
Here's how Customer Specifications is used in Mold Injection Operator jobs:
  • Set up injection mold machine to process orders per customer specifications.
  • Follow guidelines to produce functional bearings that meet customer specifications while maintaining a high level of productivity and quality.
  • Assisted in establishing first run and continuous process capability for the customer specifications sheets and machine parameters.
  • Inspected automotive seating pads for visual defects in accordance with established quality and customer specifications.
  • Conducted testing on finished product to ensure quality and product conformed to customer specifications.
  • Set up folding machinery to fold product according to customer specifications and departmental requirements.

Show More

48. Customer Requirements

low Demand
Here's how Customer Requirements is used in Mold Injection Operator jobs:
  • Meet customer requirements, quality standards and regulations.
  • Load molding machine; program and operate injection molder; and configure molding machine to meet customer requirements.
  • Mold, trim, inspect and pack parts to meet customer requirements.
  • Inspect and package parts per customer requirements.
  • Coordinated manufacturing, construction, installation and maintenance projects for engineering team to complete per customer requirements.
  • Provided quality control of products based on customer requirements and standards.

Show More

49. Nissan

low Demand
Here's how Nissan is used in Mold Injection Operator jobs:
  • Operated injection molding machines for various auto makers: GM, Toyota and Nissan.
  • Assembled car parts for Nissan.

Show More

20 Most Common Skill for a Mold Injection Operator

Plastic Parts47.4%
Inspect Parts8.8%
Mold Parts6.7%
Safety Procedures5.7%
Injection Mold Operator3%
Final Inspection2.7%
Quality Checks2.5%
Excess Material2.4%

Typical Skill-Sets Required For A Mold Injection Operator

RankSkillPercentage of ResumesPercentage
1
1
Plastic Parts
Plastic Parts
38.7%
38.7%
2
2
Inspect Parts
Inspect Parts
7.2%
7.2%
3
3
Mold Parts
Mold Parts
5.5%
5.5%
4
4
Safety Procedures
Safety Procedures
4.6%
4.6%
5
5
Injection Mold Operator
Injection Mold Operator
2.5%
2.5%
6
6
Final Inspection
Final Inspection
2.2%
2.2%
7
7
Quality Checks
Quality Checks
2.1%
2.1%
8
8
Excess Material
Excess Material
2%
2%
9
9
Quality Standards
Quality Standards
1.9%
1.9%
10
10
Injection Mold Press
Injection Mold Press
1.7%
1.7%
11
11
Hand Tools
Hand Tools
1.7%
1.7%
12
12
Set-Up
Set-Up
1.7%
1.7%
13
13
Assembly Line
Assembly Line
1.6%
1.6%
14
14
Cast Parts
Cast Parts
1.4%
1.4%
15
15
Machine Operation
Machine Operation
1.4%
1.4%
16
16
Troubleshoot
Troubleshoot
1.2%
1.2%
17
17
Inspect Products
Inspect Products
1.1%
1.1%
18
18
Thermoplastic Materials
Thermoplastic Materials
1.1%
1.1%
19
19
Car Parts
Car Parts
1.1%
1.1%
20
20
Raw Materials
Raw Materials
1.1%
1.1%
21
21
Product Quality
Product Quality
1.1%
1.1%
22
22
Ensure Conformance
Ensure Conformance
1%
1%
23
23
Continuous Operation
Continuous Operation
0.9%
0.9%
24
24
Automatic Machines
Automatic Machines
0.9%
0.9%
25
25
CNC
CNC
0.9%
0.9%
26
26
Automotive Parts
Automotive Parts
0.9%
0.9%
27
27
Defective Parts
Defective Parts
0.8%
0.8%
28
28
Detect Jams
Detect Jams
0.7%
0.7%
29
29
Mold Changes
Mold Changes
0.7%
0.7%
30
30
Surface Defects
Surface Defects
0.7%
0.7%
31
31
ISO
ISO
0.6%
0.6%
32
32
Dimension Defects
Dimension Defects
0.6%
0.6%
33
33
Grind Scrap Plastic
Grind Scrap Plastic
0.6%
0.6%
34
34
Production Processes
Production Processes
0.6%
0.6%
35
35
Plastic Powders
Plastic Powders
0.6%
0.6%
36
36
Production Goals
Production Goals
0.6%
0.6%
37
37
Excess Plastic
Excess Plastic
0.5%
0.5%
38
38
SPC
SPC
0.5%
0.5%
39
39
Honda
Honda
0.5%
0.5%
40
40
Air Hoses
Air Hoses
0.5%
0.5%
41
41
Multiple Machines
Multiple Machines
0.5%
0.5%
42
42
Toyota
Toyota
0.5%
0.5%
43
43
Osha
Osha
0.5%
0.5%
44
44
Starts Machine
Starts Machine
0.5%
0.5%
45
45
SOP
SOP
0.4%
0.4%
46
46
Different Types
Different Types
0.4%
0.4%
47
47
Customer Specifications
Customer Specifications
0.4%
0.4%
48
48
Customer Requirements
Customer Requirements
0.4%
0.4%
49
49
Nissan
Nissan
0.4%
0.4%

15,458 Mold Injection Operator Jobs

Where do you want to work?