Top Molder Skills

Below we've compiled a list of the most important skills for a Molder. We ranked the top skills based on the percentage of Molder resumes they appeared on. For example, 36.5% of Molder resumes contained Mold Parts as a skill. Let's find out what skills a Molder actually needs in order to be successful in the workplace.

The six most common skills found on Molder resumes in 2020. Read below to see the full list.

1. Mold Parts

high Demand
Here's how Mold Parts is used in Molder jobs:
  • Mold parts for slot machine, sand and trim each part, and then insert screws if needed.
  • Adjusted heat, pressures and overall cycles as needed to mold parts to specification.
  • Performed a variety of duties such as assembling mold parts and filling molds.
  • 98409Operated commercial grinders, cutters, and sanders assembling mold parts.
  • Cleaned, finished, and lubricated molds/mold parts.
  • Installed and secured mold or mold parts together.
  • Mold parts, feed line, change over, and clean up line.

Show More

2. Sand

high Demand
Here's how Sand is used in Molder jobs:
  • Mold machine operator: Make and assemble sand molds, making sure they are to specifications for their destination to pouring
  • Worked as a molder in the green sand department producing molds with a pattern for iron pouring.
  • Used the Bobcat Machine to move sand and gravel from one location to another.
  • Operated Drill Machinery, Sander, Buffing Machinery and Sandblaster for plastic molding.
  • Stand grinding, table grinding & Cleaning up hot sand with a bobcat.
  • Completed sawing, sanding, trimming, routine, cleaning and bonding duties.
  • Filled core jackets with raw sand to form sand cores for iron pour.
  • Used several power tools to chip and grind at burnt on sand.
  • Smooth surfaces of molds, using scraping tools or sandpaper.
  • Set up molding stations with Green Sand or No-Bake.
  • Job: Make sand and plastic molds
  • Sandblast steel for rubber removal.
  • Used Vertical Sand Blast Cabinet.
  • Prepared machines for sand production.
  • Operated mold press and sandblaster.
  • Empty sand pit with the use of a Bobcat.
  • Cut, grind, sandblast, & degas metal.
  • Make cores for no bake sand molds.
  • Make molds out of sand.
  • packed wooden sand molds to be sent to a furnace to get hot material poured into the mold

Show More

3. Safety Procedures

high Demand
Here's how Safety Procedures is used in Molder jobs:
  • Follow all safety procedures and maintain a clean and safe work environment.
  • work here full time, have experience with machines, and factory everyday routines and safety procedures
  • Adapt operational knowledge and safety procedures when switching to different ovens.
  • Follow and adhering to safety procedures for daily operations.
  • Operated machinery in accordance with all safety procedures.
  • Maintained a clean work environment and followed safety procedures.

Show More

4. Heavy Equipment

high Demand
Here's how Heavy Equipment is used in Molder jobs:
  • Assist heavy equipment operators to secure special attachments to equipment.
  • Fork lift operations on a continuous basis for moving the wax dies and other heavy equipment.
  • chain saws) Read blueprints/maps Heavy equipment operator
  • Die cast * Press operator * Heavy equipment operator *Maintenance *Q.C.

Show More

5. Hand Tools

high Demand
Here's how Hand Tools is used in Molder jobs:
  • Used a huge variety of hand tools, including tools that I fabricated myself to perform specific tasks.
  • Removed finished products from molds using hand tools, stamp identifying information on products when necessary.
  • Assembled tubes, cores, fitting and patters into molds using hand tools and depth gauges.
  • Removed products from molds, using hand tools, air hoses, and other equipment.
  • Use pneumatic tools and various hand tools.
  • Used a variety of hand tools Followed company procedures to maintain work environment in a neat and orderly condition.
  • Mix, cut, sand fiber glass Use of many hand tools
  • Set up and operate hydraulic presses * Operate Ejection Molding presses * Utilize various hand tools and power tools

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Inspect Parts

high Demand
Here's how Inspect Parts is used in Molder jobs:
  • Inspect parts, molding, pouring hot metal, vibe machine, grinding parts, shot blast, tow motor
  • Operate molding presses that make parts for cars & trucks, trim and inspect parts
  • Inspect parts after molten metal is poured into the mold.
  • Inspect parts for defects and pack them according to work instructions
  • Inspect parts for flaws and seek proper corrections when needed.
  • Remove from press, trim, sand, process, and inspect parts using all necessary equipment (e.g.
  • Mold an inspect parts, molded window frames for air craft as well as terminals.
  • operate two machines, inspect parts trim and buff and pack...
  • Make and inspect parts Knowledge of the machines
  • Mold medical components Work with microscope Inspect parts
  • Inspect parts Sort parts Run multiple molds
  • Clean and assemble molds * Prepare molds for pouring * remove production parts from molds * Inspect parts for defects

Show More

7. Excess Material

high Demand
Here's how Excess Material is used in Molder jobs:
  • Repaired and maintained machines, cut off excess materials, read specifications to determine setup and prescribed temperatures and time settings.
  • Trimmed excess material from parts, using knives, and grind scrap plastic into powder for reuse.
  • Removed excess materials, and level and smooth mold.
  • Trim excess material using precision cutting tools.
  • Clean parts from excess material, oils.
  • Cut off excess material with lathe.
  • Received kayaks from the "ovens" to cut out all holes and excess material.
  • Operate metal molding machines Mold thermoplastic parts Cut off excess material

Show More

8. Car Parts

high Demand
Here's how Car Parts is used in Molder jobs:
  • Molded rubber car parts, cleaned off rubber mold, injected molds and sand blasted molds.
  • Molded fiberglass car parts using hot press and water jet.
  • Worked in a factory molding car parts.
  • Molded car parts for consumers.
  • Molded car parts for general motors
  • Removed molded car parts from molder meeting metrics Repackaged damaged parts for shipment
  • Express Temp) St/ Louis, MO Duties: Molded, cleaned, cut and grinded car parts.

Show More

9. Plastic Parts

high Demand
Here's how Plastic Parts is used in Molder jobs:
  • Set up, operated, and tended molding machines to mold or cast metal or thermoplastic parts or products.
  • Operate various plastic injection molding machines producing plastic parts for customers in automotive, medical and other industries.
  • Operate multiple Press machines making various plastic parts for military items.
  • Mold and cast metal or plastic parts.
  • Experience working with medical plastic parts.
  • Operated Automatic press and injection mold press to manufacture plastic parts

Show More

10. Foundry

high Demand
Here's how Foundry is used in Molder jobs:
  • Mold both No-Bake and Rollover Molds for entire foundry.
  • Worked as a molder in a foundry.
  • Prospect Foundry Minneapolis, mn Operate molding machines that compact sand in flasks to form molds.
  • Polished casting experience in steel foundry environment.
  • Shop supply officer in charge of identifying and procuring materials needed to keep the foundry running smoothly.
  • Transport castings from foundry to appropriate areas in machining.

Show More

11. Set-Up

high Demand
Here's how Set-Up is used in Molder jobs:
  • Executed the entire assembly process by accurately interpreting set-up sheets, work orders, drawings or blueprints.
  • Performed set-up builds for shipments and reviewed orders to ensure availability of materials.
  • Ensured availability of objects needed to set-up machine.
  • Performed machine set-up and maintenance as necessary.
  • Inspected parts ever thirty minutes for defects and packed off the parts to help the set-ups.
  • Performed Set-Up and Changeover of Metal Roll-form Tooling and Dies on 30 Ton Cut-off press.

Show More

12. Quality Standards

high Demand
Here's how Quality Standards is used in Molder jobs:
  • Provided direction to lower grade employees in performance and quality standardsReason for Leaving- Laid Off Contract Ended
  • Machine operator transfer raw materials finished products ensure all quality standards are met
  • Inspected and assured workmanship met quality standards established by company and customer specifications.
  • Operated injection molding and structural foam machines according to quality standards.
  • Performed visual, mechanical and functional verification of parts to ensure compliance to set specification and quality standards.
  • Instituted a Statistical Process Control program to meet ever increasing quality standards.

Show More

13. Assembly Line

high Demand
Here's how Assembly Line is used in Molder jobs:
  • Remove excess molding and plastic from freshly molded Nissan dash-boards on an assembly line using razor-blades and scrapers.
  • Remove trays of chocolate from assembly line, package and label efficiently.
  • Wire harnessing and molds for electrical appliances via an assembly line.
  • Worked on an assembly line in fast paced environment.
  • Molded, performed various duties on assembly line.
  • Place Parts from Assembly line Clean and grease molders Mix and grind parts specific to each molder
  • Organized product on an assembly line Operation of machine press Maintenance of machine press

Show More

14. Rubber Parts

high Demand
Here's how Rubber Parts is used in Molder jobs:
  • Operated various molds throughout the plant to mold rubber parts for vehicles.
  • Mold together rubber parts to make a complete part.
  • Molded rubber parts together with hot molds.
  • Molded rubber parts for various clients
  • Molded rubber parts for cars.
  • Set up, operate, plastic molding and coremaking machines to mold thermoplastic or rubber parts or products.
  • Make rubber parts for washer, dyers and ect.

Show More

15. Bobcat

average Demand
Here's how Bobcat is used in Molder jobs:
  • Operate tow motor and Bobcat.
  • Can operate a hi-lo and bobcat Skills Used Hard working dedicated employee, quick learner and works well with others.
  • Certified to run both a bobcat and forklift.
  • Fork lift and Bobcat certified.

Show More

16. Auto Parts

average Demand
Here's how Auto Parts is used in Molder jobs:
  • Worked in the molding department molding auto parts
  • Forwarded completed auto parts to the warehouse.
  • SOP) Removed materials that would cause low quality Auto parts.

Show More

17. Quality Checks

average Demand
Here's how Quality Checks is used in Molder jobs:
  • Performed in-process quality checks and corrected non-conformance.
  • Perform quality checks using micrometers, calipers, thickness and pin gauges.
  • Loaded/Unloaded shipments Made sure orders were filled and completed accurately Performed quality checks on merchandise Ensured safe activities within the warehouse
  • Operate presses to produce medical divices * Worked with liquid silicone * Did in-process quality checks
  • Performed quality checks and routine maintenance of machinery.
  • Performed visual and dimensional quality checks.

Show More

18. CNC

average Demand
Here's how CNC is used in Molder jobs:
  • Prepared jet engine parts for the CNC Machinist Performed at a high level of quality and compliance.
  • Operated and retool CNC and conventional manufacturing equipment.
  • Build, troubleshoot and repair plastic injection molds using manual and CNC mills, grinders and wire and sinker EDM.
  • Set up and operated CNC chuck lathe and trill/tap centers.
  • Provide quality control to post CNC injection moldings.
  • Operate a vertical press and CNC machine.

Show More

19. Aluminum

average Demand
Here's how Aluminum is used in Molder jobs:
  • Operated hydraulic molding machines which produced aluminum castings.
  • Poured liquid aluminum to create molds for concrete flower pots, tables and animals.
  • Process includes pouring aluminum into molds, gathering and packaging the molded parts.
  • Operate a squeeze-jolt machine in order to manufacture molds for aluminum castings.
  • Poured iron, brass and aluminum.
  • Fix any imperfections on the tools when found during inspections Change pots of aluminum when empty during shift.
  • Created molds made of sand from a pattern.Filled the molds with molten Iron or Aluminum
  • pour liquid aluminum in mold, wait to harden, then inspect.
  • Process all prototype molds Kirksite, aluminum, P20
  • Poured and inspected aluminum castings, tended melters, kept SPC charts on aluminum process.
  • Prepared area with tools needed to complete job Worked with molten aluminum Inspection of parts Sawed gating off of pistons

Show More

20. Customer Service

average Demand
Here's how Customer Service is used in Molder jobs:
  • Cashier and Customer Service at the OU Games in the Pizza Hut Shop located at the OU Stadium.
  • Clerk Enter member's insurance information on a daily basis Administration Assistant Customer service
  • Operate rubber injection presses, Backup production planner, Backup shipping/receiving/customer service.
  • Authored procedures and work instructions for purchasing, customer service, shipping and information systems.
  • Implemented changes in customer service in order to improve the complaint response process.
  • Ensured highest level of customer service, which resulted in increased productivity.

Show More

21. Product Quality

average Demand
Here's how Product Quality is used in Molder jobs:
  • Maintained product quality standards before sending to next process.
  • Cleaned mold machines to ensure product quality.
  • Selected Achievements: Pulled counter tops out of ovens, inspected product quality and proper shipment.
  • Performed finished product quality checks in which I properly made adjustments/ corrections safely and efficiently.
  • Operated blow mold machines constantly monitoring product quality; insured only top quality products were produced
  • Apply manufacturing procedures in a continuous effort to improve manufacturing efficiency and product quality.

Show More

22. Machine Operation

average Demand
Here's how Machine Operation is used in Molder jobs:
  • Monitor Production equiptment - (constantly monitor mold temperatures and machine operations).
  • Monitored machine operation and controlled panel displays, and compare readings to specifications in order to detect malfunctions.
  • Trained new hires as machine operators and mentored apprentices to perform effective machine operation procedures.
  • Observed machine operation and examined products ejected by machines to determine whether products met specifications.
  • Observed machine operation for evidence of malfunctions and verified the temperature range adhered to specification.
  • Monitored production and adjusted work assignments, supply of material and machine operation when necessary.

Show More

23. Company Standards

average Demand
Here's how Company Standards is used in Molder jobs:
  • Prepared and operated molding press/produce high quality products according to company standards.
  • Inspected finished products for quality and established company standards.
  • Inspected the molded products to ensure they met company standards.
  • Cleaned and maintained work area per company standards.
  • Maintain safe work environment Meet daily quota and company standards Trimming / packaging molded parts Load / unload machines
  • Monitored process and work station information to guarantee accuracy and conformance to company standards.

Show More

24. Fiber Glass

average Demand
Here's how Fiber Glass is used in Molder jobs:
  • Handled the cutting and molding of multiple fiber glass parts.
  • Mold fiber glass sheets for wind mill blades.
  • Molded hood liners and headliners made from fiber glass Ice blasted the build up on molds Glued PVC to car insulation

Show More

25. Dimension Defects

average Demand
Here's how Dimension Defects is used in Molder jobs:
  • Measured and visually inspected products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
  • Measured and visually inspected products for surface and dimension defects.

Show More

26. Automatic Machines

average Demand
Here's how Automatic Machines is used in Molder jobs:
  • Observe continuous operation of automatic machines to ensure that products meet specifications.
  • Observe automatic machines to ensure that products meet specifications, making adjustments as necessary.
  • Run fast paced automatic machines while assembling parts.
  • Maintained a clean, safe work environment Observed continuous operation of automatic machines.

Show More

27. Honda

average Demand
Here's how Honda is used in Molder jobs:
  • Assembled Honda automobile parts Maintained cleanliness of work area Assisted other with their duties
  • Operated stamping machine producing molds for Honda and Mitsubishi vehicle headliners.
  • Keep machine running while producing quality parts for Honda, Nissan, and Toyota
  • Assembled Honda parts for 2018 model's.
  • Run different types of car parts for Nissan and Honda.
  • Charged with the operation of an automated molding machine that produced air ducts and headliners for the Honda Odyssey Mini Van.

Show More

28. Different Types

average Demand
Here's how Different Types is used in Molder jobs:
  • Used different types of Plastic Polymer in powder form.
  • Worked many types of jobs with different types of material.
  • Worked on many different types of plastic injection and below molding presses.
  • Run many different types of plastic injection presses.
  • Monitor multi - cavity thermoplastic machines that produce different types of molded parts on fully automatic or single cycle operation.
  • Trained in the use in many different types of equipment.

Show More

29. Raw Materials

low Demand
Here's how Raw Materials is used in Molder jobs:
  • Loaded raw materials into a molding machine and monitored operations during the production of rubber gloves.
  • Worked closely with material handler to ensure proper raw materials in area and ongoing availability of materials.
  • Monitored raw materials on hand and informed superiors of anticipated supply issues.
  • Examined, inspected and measured raw materials and finished products to verify conformance to specifications.
  • Manufactured raw materials into solid parts.
  • Lift raw materials, finished products, and packed items, manually or using hoists.

Show More

30. Trouble Shooting

low Demand
Here's how Trouble Shooting is used in Molder jobs:
  • Trouble shooting in case of any malfunctions either with the caster or the parts being produced.
  • Experience with robotics (programming -adjusting and trouble shooting).
  • Operated fully automated die cast machine, inspected parts did set up and trouble shooting.
  • Trouble shooting, and repair of equipment, also perform die maintenance.
  • Die setup, trouble shooting, maintenance, and quality assurance.
  • Trouble shooting & problem solving.

Show More

31. Production Goals

low Demand
Here's how Production Goals is used in Molder jobs:
  • Assist team members when needed to meet production goals.
  • Operated large production machinery while maintaining production goals.
  • Plan and establish work schedules, assignments, and production sequences to meet production goals.
  • Communicated to employees on production goals, safety compliance, and GMP procedures.
  • Meet or exceed daily production goals and quality requirements.
  • Cleaned parts and maintained production goals.

Show More

32. Osha

low Demand
Here's how Osha is used in Molder jobs:
  • Operated Plastic Injection Molding PressesProvided Breaks for other OperatorsKept Workshop clean while observing OSHA requirements
  • Perform Market Task work to clean MachineryFollows OSHA Safety training rules and regulations while performing job duties.
  • Cleaned and maintained the warehouse in compliance with OSHA safety standards.
  • Understand and comply with OSHA requirements.
  • Stand up and sit-down forklift OSHA certified
  • Learned and adhered to OSHA policies and procedures.

Show More

33. Data Entry

low Demand
Here's how Data Entry is used in Molder jobs:
  • Completed both written and computer scheduled data entry of machine specs.
  • Job involves reconciling Factory Order Packets, Data entry of inspection results, Safe Launch data entry, etc.
  • Inspected quality and made data entry in Shop Floor Data System.
  • General computer tracking and data entry.
  • Produced automotive and home electric sensor components, Qualitative inspection under microscope for defects and end of the day data entry.
  • Recorded precise measurements and weight every half hourInspected for visual defectsKept log sheet of parts producedData entry for all production produced

Show More

34. Toyota

low Demand
Here's how Toyota is used in Molder jobs:
  • Constructed door seals used in the production of door frames for various models of Toyota automobiles.
  • Operated injection machinery to create molded components and parts for Toyota and GE.
  • Molded air conditioning parts for Nissan and Toyota.
  • mold rubber door seals for Toyota
  • Mold headliners for mercedes, bmw, ford, toyota, nissan models.
  • Operated mold press molding interior carpets for Toyota's, Honda's, Hummers, BMW, automobiles.

Show More

35. Plastic Products

low Demand
Here's how Plastic Products is used in Molder jobs:
  • Examined plastic products for defects such as scratches, flash and discolorations and discarded defective items into reject boxes.
  • Remove plastic products from molding machine and pack in boxes
  • Packaged plastic products for shipping, also assembled products.
  • Specialized in Injection Molding, manufacturing various plastic products.
  • Performed trimming operations of plastic products.
  • Worked as an injection mold operator manufacturing plastic products.

Show More

36. Customer Specifications

low Demand
Here's how Customer Specifications is used in Molder jobs:
  • Identify scrap and segregates it from product that meets customer specifications.
  • Identify and prepare raw materials necessary to produce quality product per customer specifications.
  • Inspected finished products for quality and adherence to customer specifications.
  • Inspected finished products for quality and adherence to customer specifications.
  • Inspect finished products for quality and adherence to customer specifications.
  • Packaged parts for shipping according to customer specifications.

Show More

37. Final Product

low Demand
Here's how Final Product is used in Molder jobs:
  • Assemble the masks and inspect the final product for reliability and safety of the operator.
  • Operate band saw and various hand tools to perform cut out of final products.
  • Inspected all final product to ensure consistent level of quality
  • Inspect final product for any defects.
  • Moved product through as it completes each process Cleaned, sanded and ensured final product was finished and ready for shipment
  • Cooked products in walk-in oven Cleaned and packaged final products Restocked inventory, cleaned molds and environment

Show More

38. Chrysler

low Demand
Here's how Chrysler is used in Molder jobs:
  • Operated 10 - Ton Mold to manufacture rubber insulation for Chrysler/ Jeep automobiles.
  • Up until the partnership with Daimler and Chrysler, those parts were exclusively produced in Germany.
  • Worked with Chrysler engineers on the original design of vacuum harnesses.
  • Assemble parts for Chrysler transmission- Managed production time- Efficiently working to meet hourly quota
  • Account Manager: Developed and expanded new and existing accounts within Chrysler Corporation.
  • Mold plastic /install on doors for Chrysler

Show More

39. Production Process

low Demand
Here's how Production Process is used in Molder jobs:
  • Follow a repeatable production process to ensure we manufacture quality.
  • Monitor and adjust production processes or equipment for quality and productivity.
  • Monitor and adjust production processes or equipment for quality and productivity.
  • Evaluated production processes and equipment to find opportunities for improvement.
  • Prepared machine for production process by equipping it with the required tools and parts.
  • Operated machinery used in the production process, or assist machine operators.

Show More

40. Different Parts

low Demand
Here's how Different Parts is used in Molder jobs:
  • Fork lift operator, moved material to different parts of the plants so work could be completed.

Show More

41. Production Requirements

low Demand
Here's how Production Requirements is used in Molder jobs:
  • Maintained production requirements and quality order fulfillment for suppliers.
  • Molded weather stripping for vehicles, prepared and packaged boxes for shipping Maintained or exceeded production requirements
  • Scheduled labor per production requirements and coordinated mold changes.
  • Assigned a crew of 15 machine and assembly operators to complete daily task per production requirements.
  • Experience in working over-time to complete the production requirements for clients.
  • Ensured products were produced on time and of good qualityMonitor product standards, production requirements and quality-control programs.

Show More

42. Surface Defects

low Demand
Here's how Surface Defects is used in Molder jobs:
  • Inspected products for surface defects and flaws while concurrently ensuring conformance to specifications.
  • Examined for surface defects, such as dents, felt stiffness and consistency to detect machinery malfunction, trimming flash.
  • Removed cured product from mold, Also inspected products for surface defects and flaws.
  • Remove and clean the product from the mold or conveyor while examining the product for any surface defects.
  • Examined molded product for surface defects, such as dents, bubbles, thin areas, and cracks.
  • Examined molded product for surface defects.

Show More

43. Mold Sections

low Demand
Here's how Mold Sections is used in Molder jobs:
  • Form and assemble slab cores around patterns and position wire in mold sections to reinforce molds.
  • Positioned patterns inside mold sections.
  • Sift and pack sand into mold sections, core boxes, and pattern contours, using hand or pneumatic ramming tools.
  • Sprinkle or spray parting agents onto patterns and mold sections to facilitate removal of patterns from molds.
  • Position patterns inside mold sections and clamp sections together.

Show More

44. Storage Rack

low Demand
Here's how Storage Rack is used in Molder jobs:
  • Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.
  • Loaded and stacked filled molds on storage racks.
  • Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.

Show More

45. ISO

low Demand
Here's how ISO is used in Molder jobs:
  • Reported to Molding Department Supervisor.
  • Introduced (1993) I-DEAS software, and established engineering standards and methods in New Product Development process (ISO-9000).
  • Achieved class 100,000 optimization of control conditions for clean room and received ISO Certification.
  • Ensured proper procedure for creating molds for castings per psi's Supervisor: Jerry Howard
  • Molded, ground, machine operator and supervisor.
  • Notified supervisor of any break downs.
  • Inspected rims Recognized and reported defective items and equipment to shift supervisor.
  • Molded urethane for a company called Helton, Inc located in Morrison, Tn through a staffing company.
  • Inform al supervisor o persona encargada cualquier anormalidad en el producto o proceso.

Show More

46. PPE

low Demand
Here's how PPE is used in Molder jobs:
  • Operated a polyurethane injection mold for base steering wheels, inspected and packed wheels to be shipped for leather wrapping.
  • Check parts to ensure it was properly molded and that it is in good condition to be used and shipped.
  • Printed and verified the label and pushed the box out to be shipped to which ever company it belonged to.
  • Inspected part to ensure it would pass inspection and it could be shipped out to our manufacturers.
  • Poured plastic powder into kayak mold sent to oven then popped the molded kayak out repeated process
  • Insure molds are of proper appearance and integrity to perform customer's desired task.
  • Stripped wires, molded plugs and grommets, general labor, worked cell line
  • Job included inspecting and packaging of product to be shipped to printing department.
  • Operated a Molding Press making rubber Medical Stoppers, for the Medical Field.
  • Completed construction; attached gaskets, stapled and dropped tanks into finished wells.
  • Assembled and shipped BOSE products; packed containers and re-pack damaged containers.
  • Trimmed and inspected part's before they were boxed and shipped.
  • Wrapped and worked closely with material handler to transport finished products.
  • Molded plastic casting of kayaks after popped out the oven.
  • Wrapped finish products, and use correct labeling for shipping.
  • Ensured meals were prepared in a visually appealing manner.
  • Removed wrinkles and trapped air in rolled products.
  • Fill machine hoppers Ensures every casting is molded to the U.S. Navy specifications and standards for safe shipboard operations
  • Audit and rework parts and send them back to final audit to be shipped to the customer.
  • Molded product using a handpress, and tapped mold to ensure uniformity.

Show More

47. Ensure Conformance

low Demand
Here's how Ensure Conformance is used in Molder jobs:
  • Weighed and checked finished products to ensure conformance to product specifications and quality standards.
  • Measured and visually inspected products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
  • Set up and operated machine and adjusted controls that regulated operational functions to ensure conformance to specifications.
  • Measured amounts of products, lengths of extruded articles, and weights of filled containers to ensure conformance to specifications.
  • Inspected units to detect malfunctions and adjusted, repaired and replaced component parts to ensure conformance to specifications.
  • Inspect materials and products for defects, and to ensure conformance to specifications.

Show More

20 Most Common Skill for a Molder

Mold Parts43.3%
Sand10.1%
Safety Procedures9%
Heavy Equipment5.8%
Hand Tools5.4%
Inspect Parts3.2%
Excess Material2.4%
Car Parts2.3%

Typical Skill-Sets Required For A Molder

RankSkillPercentage of ResumesPercentage
1
1
Mold Parts
Mold Parts
36.5%
36.5%
2
2
Sand
Sand
8.5%
8.5%
3
3
Safety Procedures
Safety Procedures
7.6%
7.6%
4
4
Heavy Equipment
Heavy Equipment
4.9%
4.9%
5
5
Hand Tools
Hand Tools
4.5%
4.5%
6
6
Inspect Parts
Inspect Parts
2.7%
2.7%
7
7
Excess Material
Excess Material
2%
2%
8
8
Car Parts
Car Parts
1.9%
1.9%
9
9
Plastic Parts
Plastic Parts
1.9%
1.9%
10
10
Foundry
Foundry
1.9%
1.9%
11
11
Set-Up
Set-Up
1.8%
1.8%
12
12
Quality Standards
Quality Standards
1.6%
1.6%
13
13
Assembly Line
Assembly Line
1.5%
1.5%
14
14
Rubber Parts
Rubber Parts
1.3%
1.3%
15
15
Bobcat
Bobcat
1.2%
1.2%
16
16
Auto Parts
Auto Parts
1%
1%
17
17
Quality Checks
Quality Checks
0.9%
0.9%
18
18
CNC
CNC
0.9%
0.9%
19
19
Aluminum
Aluminum
0.8%
0.8%
20
20
Customer Service
Customer Service
0.8%
0.8%
21
21
Product Quality
Product Quality
0.8%
0.8%
22
22
Machine Operation
Machine Operation
0.8%
0.8%
23
23
Company Standards
Company Standards
0.8%
0.8%
24
24
Fiber Glass
Fiber Glass
0.7%
0.7%
25
25
Dimension Defects
Dimension Defects
0.7%
0.7%
26
26
Automatic Machines
Automatic Machines
0.7%
0.7%
27
27
Honda
Honda
0.7%
0.7%
28
28
Different Types
Different Types
0.7%
0.7%
29
29
Raw Materials
Raw Materials
0.7%
0.7%
30
30
Trouble Shooting
Trouble Shooting
0.7%
0.7%
31
31
Production Goals
Production Goals
0.7%
0.7%
32
32
Osha
Osha
0.6%
0.6%
33
33
Data Entry
Data Entry
0.6%
0.6%
34
34
Toyota
Toyota
0.6%
0.6%
35
35
Plastic Products
Plastic Products
0.6%
0.6%
36
36
Customer Specifications
Customer Specifications
0.5%
0.5%
37
37
Final Product
Final Product
0.5%
0.5%
38
38
Chrysler
Chrysler
0.5%
0.5%
39
39
Production Process
Production Process
0.5%
0.5%
40
40
Different Parts
Different Parts
0.5%
0.5%
41
41
Production Requirements
Production Requirements
0.4%
0.4%
42
42
Surface Defects
Surface Defects
0.4%
0.4%
43
43
Mold Sections
Mold Sections
0.4%
0.4%
44
44
Storage Rack
Storage Rack
0.4%
0.4%
45
45
ISO
ISO
0.4%
0.4%
46
46
PPE
PPE
0.4%
0.4%
47
47
Ensure Conformance
Ensure Conformance
0.4%
0.4%

103 Molder Jobs

Where do you want to work?