Test Technician jobs at MYR Group

```html About the Company NAES is seeking a Combustion Turbine Technician to support operations at a Simple Cycle combustion turbine facility in Neenah, Wisconsin. The Technician will be responsible for performing a wide range of duties related to the safe and reliable operation, inspection, and maintenance of combustion turbine systems, with an emphasis on electrical and instrumentation/control (I&C) systems. The ideal candidate will bring a strong electrical background and a collaborative, safety-first mindset to support power generation operations in compliance with regulatory and company standards. About the Role The Combustion Turbine Technician will support operations at a Simple Cycle combustion turbine facilities in Sheboygan & Neenah, Wisconsin. There are TWO DIRECT Hire Positions and relocation assistance is provided to the right candidate Responsibilities Operate and monitor combustion turbines and auxiliary equipment in accordance with safety and environmental regulations. Perform troubleshooting, repairs, and routine maintenance on electrical and I&C systems. Conduct inspections and preventative maintenance using Maximo or similar CMMS systems. Calibrate and maintain instrumentation, control systems, and performance monitoring equipment. Maintain accurate logs of plant operations, equipment conditions, and maintenance activities. Support water treatment operations, including chemical handling and system performance testing. Operate mobile and heavy equipment to assist with maintenance activities. Collaborate with internal teams and contractors during equipment installation and repairs. Perform light welding and mechanical repairs as needed. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain plant cleanliness and adhere to all safety policies and procedures. Provide support to other generating facilities as required. Qualifications Associate Degree in Electrical, Mechanical, or Instrumentation & Control Technology required. 4+ years experience in electrical, mechanical, or I&C trades, OR 2+ years of experience in combustion turbine operations and maintenance. Completed apprenticeship in a related trade is a plus. Demonstrated up-to-date electrical or I&C field experience is required. Required Skills Strong background in electrical or instrumentation and control (I&C) systems. Familiarity with combustion turbine operation and maintenance. Ability to read and interpret blueprints, diagrams, and specifications. Demonstrated mechanical and/or electrical aptitude. High level of personal and technical responsibility. Ability to work independently or as part of a collaborative team. Valid driver's license required. Must reside within 60 minutes of the Neenah Generating facility per company policy. Preferred Skills Completed apprenticeship in a related trade is a plus. Pay range and compensation package Compensation details are not specified in the provided job description. Equal Opportunity Statement NAES is committed to diversity and inclusivity in the workplace. ```

Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Pittsburg, CA location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: Must have a B.S. in Chemical or Electrical Engineering. A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

Program: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following: * Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). * Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. * Making changes to operating modes or to equipment to optimize efficiency. * Troubleshooting plant process and equipment problems and implementing solutions. * Utilizing control systems and high-level advanced controls technology to optimize plant performance. * Training operators in the areas of safety and plant operations. * Providing some supervision of plant personnel or drivers as assigned by facility management. * Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. * Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. * Monitoring plant and distribution costs for alignment with budgets and targets for improvement. * Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. * Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Pittsburg, CA location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: * Must have a B.S. in Chemical or Electrical Engineering. * A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. * 0 - 3 years of experience preferred. * Prior internship or co-op experience preferred. * Must have very strong technical skill sets. * Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. * Must be a self-starter and ability to work independently and participate on cross-functional teams. * Must be able to manage multiple priorities, drive issues to completion, and obtain results. * Must be detail-oriented with an ability and desire to persevere. * Must be proficient in the use of Microsoft Word, Excel and PowerPoint. * Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

Qualifications: B.S. in Chemical or Mechanical Engineering A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1 Location\: Niagara Falls, NY Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Niagara Falls, NY location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training.

Qualifications: Must have a B.S. in Engineering Technology or Mechanical Engineering. A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1 Location\: Tonawanda, NY Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Tonawanda, NY location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training.

Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. In this role, the LTOP engineer will support the Linde data historian platform. This platform is used by plant operations and engineering to ensure safe, reliable operations and supply of Linde products, and as a source for many downstream enterprise applications and tools. Specific activities that will be performed by the engineer include but is not limited to the following: Support of plant data Historian application and servers Custom application development and use of common scripting languages including Python and PowerShell Use of Application Programming Interfaces (API) to automate new and existing processes Testing and implementation of upgrades to commercial software applications Develop training for operations personnel on data historian tools and applications Executing projects in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Tonawanda, NY location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: A B.S. degree in Computer Science or Engineering; or similar IT related degree. A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to other domestic regions and office locations. Travel is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

Qualifications: Must have a B.S. in Engineering Technology, Mechanical or Chemical Engineering. A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1 Location\: Tonawanda, NY Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Tonawanda, NY or Burr Ridge, IL location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training.

Qualifications: Must have a B.S. in Mechanical Engineering or Engineering Technology A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1 Location\: Pittsburg or Wilmington, CA Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to either the Wilmington or Pittsburg, CA locations. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training.

Program: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following: * Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). * Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. * Making changes to operating modes or to equipment to optimize efficiency. * Troubleshooting plant process and equipment problems and implementing solutions. * Utilizing control systems and high-level advanced controls technology to optimize plant performance. * Training operators in the areas of safety and plant operations. * Providing some supervision of plant personnel or drivers as assigned by facility management. * Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. * Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. * Monitoring plant and distribution costs for alignment with budgets and targets for improvement. * Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. * Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to either the Wilmington or Pittsburg, CA locations. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: * Must have a B.S. in Mechanical Engineering or Engineering Technology. * A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. * 0 - 3 years of experience preferred. * Prior internship or co-op experience preferred. * Must have very strong technical skill sets. * Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. * Must be a self-starter and ability to work independently and participate on cross-functional teams. * Must be able to manage multiple priorities, drive issues to completion, and obtain results. * Must be detail-oriented with an ability and desire to persevere. * Must be proficient in the use of Microsoft Word, Excel and PowerPoint. * Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the Burr Ridge, IL location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: Must have a B.S. in Chemical or Mechanical Engineering. A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $85,000 - $90,000. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Holder Construction is currently seeking entry level Engineer Technicians in Training to support our Field Supervision and project located in Fort Wayne The perfect person for this job is a team player who thrives in a challenging and fast-paced yet supported environment. The ideal candidate will have a strong sense of teamwork, the ability to work independently on assignments, handle multiple projects at one time while remaining flexible, and working within tight deadlines. Engineer Technicians in Training job duties are to support our Field Supervision and project located in Fort Wayne. The perfect person for this job is a team player who thrives in a challenging and fast-paced yet supported environment. The ideal candidate will have a strong sense of teamwork, the ability to work independently on assignments, handle multiple projects at one time while remaining flexible, and working within tight deadlines. Responsibilities include assisting our Field Engineers in operating electronic total station instrument, transit, Auto level and other surveying instruments. Assisting with setting and marking stakes for slopes, grades and other construction purposes. Setting markers, lines, corners, elevations, grades, alignments, angles, positions, and distances. Maintain total station, field book, survey equipment and tools. This position will provide primary support to our field supervision and must demonstrate ownership of assigned tasks, maintain professionalism, and use critical thinking to solve issues. Ideal candidates for this position will possess 6 mos. to 1 year of experience, able to read drawings and have training in construction safety protocols (i.e. OSHA 10, fall protection, mobile elevated platform (boom and scissor)). A high school diploma or GED are a plus as well as strong time management skills. Qualified Candidates must be agile/mobile, remain alert, be able to stand or walk for long periods of time, use fingers, hands & arms to reach, handle and manipulate objects, climb up/down ladders, scaffolds, and other objects, work on uneven surfaces/heights, be able to read/write, have the ability to see & hear well either naturally or with correction. Must be able to lift and carry materials of all shapes and sizes weighing 50 lbs. 75% of the time. Individuals must be able to work in an OSHA compliant safety environment, work outside and must be able to work overtime and weekend hours. Punctuality and promptness are required every day. We are a performance-based company with an excellent career development program which provides our associates a great opportunity to increase role/responsibilities quickly. We offer an excellent compensation and benefits package which includes paid time off, health, life, dental, vision, and a 401(k)-retirement plan. Please note that Holder Construction does not sponsor anyone for immigration benefits or immigration status. Holder is committed to the principle of equal opportunity in employment. Substance Abuse Testing and Background Screening is a condition of employment. Holder Construction is currently seeking entry level Engineer Technicians in Training to support our Field Supervision and project located in Fort Wayne The perfect person for this job is a team player who thrives in a challenging and fast-paced yet supported environment. The ideal candidate will have a strong sense of teamwork, the ability to work independently on assignments, handle multiple projects at one time while remaining flexible, and working within tight deadlines. Engineer Technicians in Training job duties are to support our Field Supervision and project located in Fort Wayne. The perfect person for this job is a team player who thrives in a challenging and fast-paced yet supported environment. The ideal candidate will have a strong sense of teamwork, the ability to work independently on assignments, handle multiple projects at one time while remaining flexible, and working within tight deadlines. Responsibilities include assisting our Field Engineers in operating electronic total station instrument, transit, Auto level and other surveying instruments. Assisting with setting and marking stakes for slopes, grades and other construction purposes. Setting markers, lines, corners, elevations, grades, alignments, angles, positions, and distances. Maintain total station, field book, survey equipment and tools. This position will provide primary support to our field supervision and must demonstrate ownership of assigned tasks, maintain professionalism, and use critical thinking to solve issues. Ideal candidates for this position will possess 6 mos. to 1 year of experience, able to read drawings and have training in construction safety protocols (i.e. OSHA 10, fall protection, mobile elevated platform (boom and scissor)). A high school diploma or GED are a plus as well as strong time management skills. Qualified Candidates must be agile/mobile, remain alert, be able to stand or walk for long periods of time, use fingers, hands & arms to reach, handle and manipulate objects, climb up/down ladders, scaffolds, and other objects, work on uneven surfaces/heights, be able to read/write, have the ability to see & hear well either naturally or with correction. Must be able to lift and carry materials of all shapes and sizes weighing 50 lbs. 75% of the time. Individuals must be able to work in an OSHA compliant safety environment, work outside and must be able to work overtime and weekend hours. Punctuality and promptness are required every day. We are a performance-based company with an excellent career development program which provides our associates a great opportunity to increase role/responsibilities quickly. We offer an excellent compensation and benefits package which includes paid time off, health, life, dental, vision, and a 401(k)-retirement plan. Please note that Holder Construction does not sponsor anyone for immigration benefits or immigration status. Holder is committed to the principle of equal opportunity in employment. Substance Abuse Testing and Background Screening is a condition of employment. Holder Construction is currently seeking entry level Engineer Technicians in Training to support our Field Supervision and project located in Fort Wayne The perfect person for this job is a team player who thrives in a challenging and fast-paced yet supported environment. The ideal candidate will have a strong sense of teamwork, the ability to work independently on assignments, handle multiple projects at one time while remaining flexible, and working within tight deadlines. Engineer Technicians in Training job duties are to support our Field Supervision and project located in Fort Wayne. The perfect person for this job is a team player who thrives in a challenging and fast-paced yet supported environment. The ideal candidate will have a strong sense of teamwork, the ability to work independently on assignments, handle multiple projects at one time while remaining flexible, and working within tight deadlines. Responsibilities include assisting our Field Engineers in operating electronic total station instrument, transit, Auto level and other surveying instruments. Assisting with setting and marking stakes for slopes, grades and other construction purposes. Setting markers, lines, corners, elevations, grades, alignments, angles, positions, and distances. Maintain total station, field book, survey equipment and tools. This position will provide primary support to our field supervision and must demonstrate ownership of assigned tasks, maintain professionalism, and use critical thinking to solve issues. Ideal candidates for this position will possess 6 mos. to 1 year of experience, able to read drawings and have training in construction safety protocols (i.e. OSHA 10, fall protection, mobile elevated platform (boom and scissor)). A high school diploma or GED are a plus as well as strong time management skills. Qualified Candidates must be agile/mobile, remain alert, be able to stand or walk for long periods of time, use fingers, hands & arms to reach, handle and manipulate objects, climb up/down ladders, scaffolds, and other objects, work on uneven surfaces/heights, be able to read/write, have the ability to see & hear well either naturally or with correction. Must be able to lift and carry materials of all shapes and sizes weighing 50 lbs. 75% of the time. Individuals must be able to work in an OSHA compliant safety environment, work outside and must be able to work overtime and weekend hours. Punctuality and promptness are required every day. We are a performance-based company with an excellent career development program which provides our associates a great opportunity to increase role/responsibilities quickly. We offer an excellent compensation and benefits package which includes paid time off, health, life, dental, vision, and a 401(k)-retirement plan. Please note that Holder Construction does not sponsor anyone for immigration benefits or immigration status. Holder is committed to the principle of equal opportunity in employment. Substance Abuse Testing and Background Screening is a condition of employment.

Linde Advanced Material Technologies Inc. Engineering Technician Indianapolis, IN, United States | req25673 Third shift,11:00pm - 07:30am, Sunday - Thursday, starting January 2026: 12-hour shift, nights What you will enjoy doing* * You will work with Quality and Engineering organizations to reduce Cost of Poor Quality (COPQ) and achieve acceptable first pass yield & collaborate with Engineering to resolve tooling related quality issues * You will support the creation of documentation necessary for new applications, including job instructions, job routers, job safety analyses, standard operating procedures, etc * Further, you will analyze the reasons for equipment failure and leads Reliability Centered Maintenance (RCM) and Root Cause Analysis (RCA) efforts & participate in reliability related incident investigations, prioritizing action items, and follow-up on their implementation * You will support Total Preventive Maintenance (TPM) efforts to increase machine utilization, as defined by facility targets & analyze process data and lead improvement projects * You will work as an integral team member on productivity projects utilizing Lean Manufacturing and Six Sigma practices & support the design and modify tooling / fixturing for new product introduction and improvement of existing processes * Also, you will support the completion of First Article Inspection (FAI) and SPS data for new product introduction and improvement of existing processes & support design reviews with safety and ergonomics focus on plant systems and production equipment changes What makes you great * Associates degree or greater required; or equivalent manufacturing experience * 3+ years of manufacturing experience are required * Proven ability to combine theoretical training with practical experience in a "hands-on" environment required * You must have effective project management skills with the ability to complete multiple projects independently * Lean Six Sigma experience preferred * You must be able to work closely with Quality / Engineering / Operations on assigned tasks * Must be reliable to achieve assigned duties in a timely manner * Working extended hours and/or weekends and holidays may be required Why you will love working with us Linde Advanced Material Technologies, formerly Praxair Surface Technologies, is a company that revolutionizes industries through innovative materials and surface coatings. We are leaders in advanced materials and offer metal powders, sputtering targets, and surface coatings that enhance performance across various sectors. Our strong focus on innovation is evident in our superior technologies for the aerospace, energy, semiconductor, automotive, and industrial industries. Linde employees learn and abide the Linde Code of Ethics and Code of Conduct by demonstrating honesty, integrity, professionalism in all communications, actions, and decisions. What we offer you! At Linde, the sky is not the limit. If you're looking to build a career where your work reaches beyond your job description and betters the people with whom you work, the communities we serve, and the world in which we all live, at Linde, your opportunities are limitless. Be Linde. Be Limitless. Linde offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! Have we inspired you? Let´s talk about it We are looking forward to receiving your complete application. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde Advanced Material Technologies Inc. abides by applicable export control laws including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a U.S. person under relevant regulations. Linde Advanced Material Technologies Inc. acts responsibly towards its shareholders, business partners, employees, society and the environment in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development. * The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Therefore employees assigned may be required to perform additional job tasks required by the manager. #LI-DNI

Linde Advanced Material Technologies Inc. Engineering Technician Indianapolis, IN, United States | req25672 Second shift, 03:00pm - 11:30pm, Monday - Friday, starting January 2026: 12-hour shift, nights What you will enjoy doing* * You will work with Quality and Engineering organizations to reduce Cost of Poor Quality (COPQ) and achieve acceptable first pass yield & collaborate with Engineering to resolve tooling related quality issues * You will support the creation of documentation necessary for new applications, including job instructions, job routers, job safety analyses, standard operating procedures, etc * You will analyze the reasons for equipment failure and leads Reliability Centered Maintenance (RCM) and Root Cause Analysis (RCA) efforts & participate in reliability related incident investigations, prioritizing action items, and follow-up on their implementation * You will support Total Preventive Maintenance (TPM) efforts to increase machine utilization, as defined by facility targets & analyze process data and lead improvement projects * Further, you will work as an integral team member on productivity projects utilizing Lean Manufacturing and Six Sigma practices & support the design and modify tooling / fixturing for new product introduction and improvement of existing processes * Also, you will support the completion of First Article Inspection (FAI) and SPS data for new product introduction and improvement of existing processes & support design reviews with safety and ergonomics focus on plant systems and production equipment changes What makes you great * Associates degree or greater required; or equivalent manufacturing experience * 3+ years of manufacturing experience is required * Proven ability to combine theoretical training with practical experience in a "hands-on" environment required * You must have effective project management skills with the ability to complete multiple projects independently * Lean Six Sigma experience is preferred * You must be able to work closely with Quality / Engineering / Operations on assigned tasks and be reliable to achieve assigned duties in a timely manner * Working extended hours and/or weekends and holidays may be required Why you will love working with us Linde Advanced Material Technologies, formerly Praxair Surface Technologies, is a company that revolutionizes industries through innovative materials and surface coatings. We are leaders in advanced materials and offer metal powders, sputtering targets, and surface coatings that enhance performance across various sectors. Our strong focus on innovation is evident in our superior technologies for the aerospace, energy, semiconductor, automotive, and industrial industries. Linde employees learn and abide the Linde Code of Ethics and Code of Conduct by demonstrating honesty, integrity, professionalism in all communications, actions, and decisions. What we offer you! At Linde, the sky is not the limit. If you're looking to build a career where your work reaches beyond your job description and betters the people with whom you work, the communities we serve, and the world in which we all live, at Linde, your opportunities are limitless. Be Linde. Be Limitless. Linde offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! Have we inspired you? Let´s talk about it We are looking forward to receiving your complete application. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde Advanced Material Technologies Inc. abides by applicable export control laws including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a U.S. person under relevant regulations. Linde Advanced Material Technologies Inc. acts responsibly towards its shareholders, business partners, employees, society and the environment in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development. * The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Therefore employees assigned may be required to perform additional job tasks required by the manager. #LI-DNI

Program\: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following\: Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. Making changes to operating modes or to equipment to optimize efficiency. Troubleshooting plant process and equipment problems and implementing solutions. Utilizing control systems and high-level advanced controls technology to optimize plant performance. Training operators in the areas of safety and plant operations. Providing some supervision of plant personnel or drivers as assigned by facility management. Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. Monitoring plant and distribution costs for alignment with budgets and targets for improvement. Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the East Chicago, IN location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: Must have a B.S. in Engineering Technology, Mechanical Engineering Technology, Mechanical Engineering or Chemical Engineering. A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. 0 - 3 years of experience preferred. Prior internship or co-op experience preferred. Must have very strong technical skill sets. Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. Must be a self-starter and ability to work independently and participate on cross-functional teams. Must be able to manage multiple priorities, drive issues to completion, and obtain results. Must be detail-oriented with an ability and desire to persevere. Must be proficient in the use of Microsoft Word, Excel and PowerPoint. Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

Program: The Linde Leadership and Technical Orientation Program (LTOP) is a program that is sponsored by Linde's United States Bulk and On-Site unit. The program has a class of engineers that go through 52 weeks of training in a structured curriculum that is designed to give a very broad exposure to all aspects of plant operations with limited exposure to the broader Linde organization. The curriculum contains training common to operations with an opportunity for technical cross training. The LTOP is a mentored program, with each participant assigned a sponsor, and is specifically designed for those desiring to use an engineering/technical degree to leverage a management career and grow within the organization. Specific areas of operations that you will be required to study include all of the various product line processes (air separation, hydrogen, hydrogen-carbon monoxide, carbon dioxide, helium, rare gases and standard plants); safety, health and environmental; distribution, logistics and customer service. Operations support functions will be covered as well. LTOP engineers will be expected to become actively involved in many aspects of their assigned training sites' activities and support their daily operations. These activities may include plant startups or shutdowns, maintenance, project planning and execution, training, problem solving, safety program execution, customer interface, personnel management, efficiency monitoring, product shipping and scheduling/planning. Specific activities that will be performed by the engineer are related to the day-to-day operation of the plant and include but is not limited to the following: * Operation of the plant using the control system and physical equipment in the field such as motors, compressors, pumps, instrumentation, and various utilities (electrical, water, steam, and instrument gas). * Assessing the efficiency and operating capability of plant equipment specifically as it relates to energy consumption. * Making changes to operating modes or to equipment to optimize efficiency. * Troubleshooting plant process and equipment problems and implementing solutions. * Utilizing control systems and high-level advanced controls technology to optimize plant performance. * Training operators in the areas of safety and plant operations. * Providing some supervision of plant personnel or drivers as assigned by facility management. * Monitoring compliance with internal Quality Assurance program requirements and initiating actions to correct non-conformance as appropriate. * Executing various aspects of the Linde Safety Program including training, documentation, inspections, and correction of deficiencies. * Monitoring plant and distribution costs for alignment with budgets and targets for improvement. * Assisting plant operations and distribution personnel with day-to-day work activities as required such as operating the plant, taking readings, doing inspections, starting, and stopping equipment, filling product vehicles, and performing Quality Assurance tests. * Executing projects in the plant in accordance with budgets, standards, and facility operating schedules Participating in technical sales and business development activities. Estimated start date for the 2026-2027 LTOP program will be on or around July 1, 2026. Locations: You will be assigned to a plant location that minimizes the need for future relocation and must be willing to relocate for this program within the U.S if the need arises. The incumbents will be assigned to the East Chicago, IN location. Some travel is required to selected locations in the US to complete assignments, participate in project activities, or for group and individual training. Qualifications: * Must have a B.S. in Engineering Technology, Mechanical Engineering Technology, Mechanical Engineering or Chemical Engineering. * A 3.0 Grade Point Average (GPA) out of 4.0 is highly desirable. * 0 - 3 years of experience preferred. * Prior internship or co-op experience preferred. * Must have very strong technical skill sets. * Must have a positive attitude, be willing to quickly adapt to changing situations, have strong communications skills, and a strong will to build and maintain productive relationships across departmental lines. * Must be a self-starter and ability to work independently and participate on cross-functional teams. * Must be able to manage multiple priorities, drive issues to completion, and obtain results. * Must be detail-oriented with an ability and desire to persevere. * Must be proficient in the use of Microsoft Word, Excel and PowerPoint. * Must be able and willing to travel to assigned facilities within the region, other facilities within the region, and make occasional trips to other domestic regions and office locations. Travel outside of the region is normally not expected to exceed 25%. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-AP1

Job Details Baytown, TX Full TimeDescription The Technical Engineer is responsible for providing exceptional customer service and technical support for the Material Take-off service by participating in client meetings, gathers and analyzes project specifications and data from model software for take-off process. This individual collaborates with sales, clients, and engineering to meet all project requirements and deliverables. POSITION DUTIES AND RESPONSIBILITIES: Serves as project liaison between engineering, sales, and the client to gather needed project documents. Participates in client sales meetings to understand the scope of work and explain to the client what information is needed to execute take-off process. Creates a plan outlining the execution of the work and the data download process to be reviewed with the clients. Gathers, analyzes, and documents information and data from models to support take-off process. Reviews project information, models, and details received for a variety of take-off projects. Proactively communicate with customers and sales to ensure all commitments and obligations are met and/or exceeded throughout the project/order. Proactively identify project issues and implement effective solutions. Keep abreast of latest developments in Revit software. Other duties as assigned to support the growth of MSI. Qualifications Bachelor's degree in Engineering or certification in Project or Construction Management, Business Management or related field (significant relevant experience will otherwise be considered). Must have hands-on experience and be proficient in using Revit software. Must be able to read/interpret construction 2D/3D drawings and blueprints and project specifications. Above average proficiency in MS Office Products, proficient skill level in Excel. Ability to effectively communicate technical concepts related to Revit to non-technical stakeholders, such as clients or sales prospects. Strong interpersonal and communication skills and the ability to work effectively with a wide range of personalities. Self-directed and able to independently manage time and projects in a fast-paced environment; results driven. PHYSICAL DEMANDS AND WORK ENVIRONMENT: There is a minimal risk of injury. Work hours are generally during normal business hours and average over 40 hours a week. May require some additional hours when working with customers. Some business travel may be required. #LI-DNI

Sub-Zero, Wolf, and Cove the leading manufacturer of luxury kitchen appliances is a longstanding, family-owned company in the Madison area. Icons of design and paragons of performance and quality, Sub-Zero, Wolf, and Cove are the refrigeration, cooking, and dishwashing specialists found in world's most luxurious homes. We look for team members who are driven by innovation and excellence, striving to serve our customers by doing what is right-with integrity, teamwork, and accountability. Our Fabrication Business Unit team is integral to the success of manufacturing luxury appliances. Our team is comprised of engineering and operations who are focused on continuous improvement, customer satisfaction and delivering high quality products on time. The fabrication business unit is a small group of skilled individuals that collaborate with operators to achieve world class manufacturing. This group relies on the input and suggestions of every member to find success. Growth and development are important aspects of this position. Whether you aspire to be a leader or a technical expert, this position will set you up for success in the future. Primary Responsibilities We are seeking a motivated individual to work as a Manufacturing Engineering Technician on 2nd Shift. The hours for this position are M-F 2PM - 10PM. This position has a strong emphasis on Fabrication within our manufacturing environment. This position would be working in a hands-on manufacturing environment where safety, quality and teamwork are of utmost importance. Individuals in this role can expect to share ownership of projects, achieve a high level of job satisfaction and feel like a valued member of the organization. Job responsibilities include, but are not limited to the following: Troubleshoot equipment and perform root cause analysis / Corrective Actions Program corrections for various sheet metal and plastics fabrication equipment Assist with new product introductions through program development and optimization Assume equipment responsibility for downtime, preventative maintenance and improvements Key team member in operator training sessions Ensure safety throughout manufacturing practices, procedures and equipment Required Qualifications: High school diploma or equivalent 5+ years of experience in a fabrication role Able to work independently and within teams Able to learn on the fly and be an excellent problem solver Understanding of hydraulic and pneumatic systems Experience with the operation of and programming of sheet metal equipment Ability to communicate effectively with all levels of the organization Familiarity with Microsoft Office Suite, especially Outlook and Excel Preferred Qualifications: Associate's degree in industrial engineering technology or related Experience reading electrical, pneumatic and hydraulic schematics Experience with Amada, Cincinnati, Fanuc Robotics, Allen Bradley Controls We value our employees by providing: Competitive compensation based on skills Industry leading health, dental, and vision plans Generous 401 (K) savings and profit sharing On-site UW Health clinic, fitness center, and walking paths Education assistance and internal training programs Electric vehicle charging Maternity & paternity leave Interested in learning more on our robust benefits package we offer? Click here! This position requires a pre-employment drug/alcohol test and background check, which will be administered after a conditional job offer is extended. A negative drug/alcohol test result is required for employment. Refusal to take the test or a positive result may disqualify a candidate from further consideration. All drug testing will be conducted in accordance with federal and state laws.

Bristol Infrastructure Design Services, LLC is hiring a Construction Surveillance Engineering Technician to Support the Department of Navy at Kings Bay Naval Base. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Specialized training for Construction Quality Verification or completed an equivalent course. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding. U.S. Citizen. A valid driver's license. Physical Demands CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker may be frequently in close quarters, crawl spaces, shafts, manholes, small-enclosed rooms, small sewage and water line pipes, and other areas that could cause claustrophobia. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health insurance plan including medical, dental, vision, life insurance, long-term disability insurance, 401(k) plan with employer match. Contingency Continued employment is contingent upon passing security clearance, drug screen, and background check.