Field Service Technician jobs at NOV - 1533 jobs

Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed. Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed. Essential Duties: Maintains a safe and well-organized work environment. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major Maintenance (MM), Overhauls and MOB/DEMOB as part of a team. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major Maintenance (MM), Overhauls and MOB/DEMOB as part of a team. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a technical resource for more complex issues in assigned area. Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a technical resource for more complex issues in assigned area. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment at customer's location as directed. Acts as a technical resource for more complex issues in assigned area. Maintains a safe and well-organized work environment and models all health, safety, and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call-Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits the required documentation accurately and quickly. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Performs maintenance and repair activities on gas compression and/or process equipment at customer's location as directed. Acts as a technical resource for more complex issues in assigned area. Skills and Abilities: Ability to: Perform all essential duties. Demonstrate advanced diagnostic and repair skills on multiple types of equipment, including compressor packages, gas process, and power generation equipment used within the region. Perform Preventative Maintenance (PM) to standard with no help. Lead a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Perform compressor calculations. Demonstrate customer service skills. Read, write, and speak English (work orders, manuals, etc.) Model all health, safety, and environmental procedures. Use computer skills, including vendor-specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer, and Outlook. Regularly complete and submit company-required documentation in an accurate and timely fashion. Respond to after-hours requests regularly on an on-call basis. Skills and Abilities: Ability to: Perform all essential duties. Demonstrate advanced diagnostic and repair skills on multiple types of equipment, including compressor packages, gas process, and power generation equipment used within the region. Perform Preventative Maintenance (PM) to standard with no help. Lead a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Perform compressor calculations. Demonstrate customer service skills. Read, write, and speak English (work orders, manuals, etc.) Model all health, safety, and environmental procedures. Use computer skills, including vendor-specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer, and Outlook. Regularly complete and submit company-required documentation in an accurate and timely fashion. Respond to after-hours requests regularly on an on-call basis. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment at customer's location as directed. Acts as a technical resource for more complex issues in assigned area. Maintains a safe and well-organized work environment and models all health, safety, and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call-Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits the required documentation accurately and quickly. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Performs maintenance and repair activities on gas compression and/or process equipment at customer's location as directed. Acts as a technical resource for more complex issues in assigned area. Skills and Abilities: Ability to: Perform all essential duties. Demonstrate advanced diagnostic and repair skills on multiple types of equipment, including compressor packages, gas process, and power generation equipment used within the region. Perform Preventative Maintenance (PM) to standard with no help. Lead a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Perform compressor calculations. Demonstrate customer service skills. Read, write, and speak English (work orders, manuals, etc.) Model all health, safety, and environmental procedures. Use computer skills, including vendor-specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer, and Outlook. Regularly complete and submit company-required documentation in an accurate and timely fashion. Respond to after-hours requests regularly on an on-call basis. Skills and Abilities: Ability to: Perform all essential duties. Demonstrate advanced diagnostic and repair skills on multiple types of equipment, including compressor packages, gas process, and power generation equipment used within the region. Perform Preventative Maintenance (PM) to standard with no help. Lead a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Perform compressor calculations. Demonstrate customer service skills. Read, write, and speak English (work orders, manuals, etc.) Model all health, safety, and environmental procedures. Use computer skills, including vendor-specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer, and Outlook. Regularly complete and submit company-required documentation in an accurate and timely fashion. Respond to after-hours requests regularly on an on-call basis. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment at customer's location as directed. Acts as a technical resource for more complex issues in assigned area. Maintains a safe and well-organized work environment and models all health, safety, and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call-Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits the required documentation accurately and quickly. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Performs maintenance and repair activities on gas compression and/or process equipment at customer's location as directed. Acts as a technical resource for more complex issues in assigned area. Skills and Abilities: Ability to: Perform all essential duties. Demonstrate advanced diagnostic and repair skills on multiple types of equipment, including compressor packages, gas process, and power generation equipment used within the region. Perform Preventative Maintenance (PM) to standard with no help. Lead a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Perform compressor calculations. Demonstrate customer service skills. Read, write, and speak English (work orders, manuals, etc.) Model all health, safety, and environmental procedures. Use computer skills, including vendor-specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer, and Outlook. Regularly complete and submit company-required documentation in an accurate and timely fashion. Respond to after-hours requests regularly on an on-call basis. Skills and Abilities: Ability to: Perform all essential duties. Demonstrate advanced diagnostic and repair skills on multiple types of equipment, including compressor packages, gas process, and power generation equipment used within the region. Perform Preventative Maintenance (PM) to standard with no help. Lead a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Perform compressor calculations. Demonstrate customer service skills. Read, write, and speak English (work orders, manuals, etc.) Model all health, safety, and environmental procedures. Use computer skills, including vendor-specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer, and Outlook. Regularly complete and submit company-required documentation in an accurate and timely fashion. Respond to after-hours requests regularly on an on-call basis. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Actively participate in the basic safety process, sharing responsibility for the sites overall safety performance. Maintain operation of plant; assist in plant equipment mechanical repairs, instrument calibrations and electrical troubleshooting. Fol Operations Technician, Operations, Process Technician, Technician, Mechanical, Manufacturing

Are you ready to build America's energy future? Form Energy is an American manufacturing and energy technology company. We're revolutionizing energy storage with cost-effective, multi-day technology designed to keep the electric grid secure and reliable, even during extended periods of stress. By strengthening the electric system and reimagining what's possible, we're giving clean energy a whole new form! In recent years, Form Energy has earned a number of accolades, including being named by TIME as a "Best Invention", MIT Technology Review as a "Top Climate Tech Company To Watch", and Fast Company as "One of the Next Big Things In Tech". We are making rapid progress on our mission of delivering energy storage for a better world, and our team is growing just as rapidly to meet demand. We have signed contracts with leading electric utilities across the United States and production of our iron-air batteries is underway at our first high-volume manufacturing facility in West Virginia. Working for Form Energy is more than just a job, it's a chance to be part of something extraordinary. And now - right as we significantly scale up battery manufacturing - might be the most exciting moment in the company's history to join. We are assembling a team of highly talented and driven individuals across the country. Driven by our core values of humanity, excellence, and creativity, our team is determined to deliver on our mission and transform the energy landscape for the better. Feeling energized to make a meaningful impact on the world? Then keep reading - you've come to the right place. Role Description Form Energy is seeking a Night Shift Training Technician to join our team at Form Factory 1 in Weirton, WV, supporting the Anode and GDE lines. In this role, you will be critical to the success of our production workforce by ensuring all Production Associates are fully trained, proficient, and compliant with all production processes and safety standards. Your primary responsibilities will be to deliver engaging and hands-on training, develop and maintain training content and work instructions, and continuously assess the effectiveness of the delivered training. You will work closely with Production Leadership and cross-functional teams (e.g., Engineering, Quality) to ensure training materials reflect the latest process improvements and quality standards. This opportunity is based out of the Greater Pittsburgh Area at Form Factory 1 in Weirton, WV. What you'll do: Training Delivery & Facilitation: Conduct engaging, hands-on, and classroom-based training for new and current Production Associates on all standard operating procedures (SOPs), work instructions, and safety protocols. Mentor and coach Production Associates on the floor to ensure proper technique, quality adherence, and efficient execution of tasks. Coordinate training schedules with Production Supervisors and Leads to minimize impact on production goals. Content Development & Maintenance: Develop, write, and maintain clear, user-friendly, and technically accurate work instructions, SOPs, and visual aids (e.g., photos, videos) for all production processes. Collaborate with Engineering, Quality, and Maintenance teams to capture and document process changes, updates, and improvements immediately upon implementation. Ensure all training materials comply with company policies, safety regulations , and quality management systems. Training Effectiveness & Improvement: Develop and implement assessment tools (e.g., practical exams, written tests) to measure the effectiveness of training and ensure employee competency. Track and report on employee training progress and certification status. Contribute to continuous improvement initiatives by providing feedback on training content and delivery to enhance operational efficiency. Safety & Compliance: Ensure all training emphasizes a safety-first mindset and strict adherence to all OSHA and company safety policies. Help identify potential hazards and train associates on appropriate preventative measures. What you'll bring: Experience: Minimum of 2 years of experience in a manufacturing or production environment. Proven experience in a training, mentoring, or instructional role, preferably on a factory floor. Experience with developing and maintaining technical documentation (SOPs, Work Instructions). Technical & Instructional Aptitude: Strong technical aptitude with the ability to quickly learn and understand complex production processes and equipment. Excellent written and verbal communication skills, with the ability to explain complex concepts clearly and concisely to diverse audiences. Familiarity with various training methodologies and adult learning principles. Problem-Solving & Detail Orientation: Strong organizational skills and exceptional attention to detail in documenting processes and tracking training data. Ability to troubleshoot and resolve immediate training or content issues as they arise. Interpersonal Skills: Ability to work effectively and collaboratively with Production Associates, Leads , Supervisors , and cross-functional teams. #LI-Onsite #LI-JM2 Humanity is a cornerstone of Form Energy's culture, and we make sure our compensation and benefits reflect that. Form Energy offers competitive salaries, stock options, and a holistic benefits package to ensure all employees have what they need to thrive while working here. When it comes to you and your family's health, we cover 100% of medical, dental, and vision premiums for full-time employees - and 80% of healthcare premiums for dependents. This starts from day one. We also offer at least 12 weeks of paid leave for new parents (up to 20 weeks for birthing parents), and generous vacation policies to give employees time to recharge when needed. To build America's energy future, we need everyone at the table. We are proud to be an equal opportunity employer, and encourage candidates from all backgrounds to apply to our open jobs. If you may require reasonable accommodations to participate in our interview process, please contact . Requests for accommodations will be treated with discretion. Form Energy is committed to maintaining the privacy of our applicants. Please be aware that we will never solicit sensitive personal information such as Social Security numbers or bank account details during the recruiting or hiring process.

: John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description: Under general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the wear and condition of critical components seal. This position completes all inspection forms taking pictures of all critical components and uses inspection equipment for proper documentation of the assembly. With assistance identifies, inspects and evaluates material returned, determines repair operations, performs simple shop operations, verify specifications, initiate work and purchase orders. Receives John Crane parts and materials returned by customers and branch offices. Evaluates from a condition of material, checks current drawing revisions and general product knowledge whether material is repairable or non-repairable. · Identifies and inspects material returned. · Ensures all components are properly cleaned and free from foreign material per departmental procedures · Performs the assembly of the seal once the repair has been released to the shop and all components have been replaced or reconditioned and marked ready for assembly. · Under close supervision, repairs returned seals and seal parts. · May perform parts structuring, check cost structure, and determine price of repair, ensures assembly is structured correctly, and price repair. · Determines necessary repair operations, ensures BOM (bill of materials) / drawings / repair parts match. · Performs simple operations on drill press (single spindle), tool post grinder, bead blast polisher and lapping machine. · Verifies part specifications with measuring instruments such as micrometer, vernier caliper, dial indicator and optical flats. · May initiates purchase orders for new jobs if vendors are involved. · Consults with Engineering or Sales departments as necessary. · Maintains necessary records and small inventory of seal parts used for repair orders. · Works from factory work orders, prints, rework orders and verbal instructions. · Assists newer repair personnel as necessary. · Sets up and troubleshoots lapping machines for repair maintenance. · May perform direct contact with customers on service and/or phone, checks computer system for credit and address information, price repairs. Qualifications: High School Diploma or equivalent. 1-2 years of experience in mechanical assembly positions. Experience working with mechanical seals is a plus. Ability to read blueprints a plus. Attention to detail. Ability to lift up to 35 pounds manually. Experience with Microsoft Office. Additional Information: With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

**Love working with your hands? Enjoy diagnosing and solving problems? Join Blue Compass RV as a Service Technician and work on everything that makes an RV a home on wheels-no engine work required! ** If you have experience in HVAC, Electrical, Plumbing, Carpentry, Mechanical Repair, Maintenance or Appliance Service, we want to talk to you! TRAINING AND CAREER GROWTH: At Blue Compass RV, we offer training like no other in the industry. Whether you're just starting out or have years of experience, we're committed to helping you level up your skills and grow your career. We don't just train you-we invest in your future. Here's what sets our training apart: Hands-on, state-of-the-art technician training All certifications are fully paid-no cost to you Ongoing web-based learning and manufacturer-led workshops On-the-job diagnostics and advanced technical training Clear advancement paths to Master Tech, Service Manager, and beyond COMPENSATION: $25-$35/hourly WHAT WE HAVE TO OFFER: Paid Mentorship program Apprentice Program Retention Bonus Structured Career Path Gas Discount Medical, dental, vision, disability, FSAs, and life insurance! Paid Time Off and paid holidays Employee assistance program Pet insurance Referral Program 5-day work weeks Legal coverage 401K! WHAT YOU WILL DO: Diagnose and repair issues with electrical, plumbing, HVAC, carpentry, and appliance systems Perform scheduled maintenance on RVs including oil changes, battery checks, tire/brake checks, and sealant inspections Install RV accessories including hitches, slide toppers, awnings, backup cameras, satellite systems, furniture, and more Track all parts and materials used and ensure proper documentation of diagnostics, cause, and repairs in work orders Communicate clearly with service advisors and managers about job status, additional needs, and timing Ensure the final product meets quality standards before returning to the customer Keep your work area clean, safe, and organized Attend required all paid company training and stay up to date with product knowledge We're hiring individuals with experience in: Automotive, Appliance Repair, Carpentry, Electrical, HVAC / AC Systems, General Maintenance and Plumbing WHAT WE ARE LOOKING FOR: 1+ year of experience in mechanical, maintenance, repair, or technical repair (RV experience a plus) Comfortable using hand/power tools and working in various environmental conditions (heat, cold, heights, noise, etc.) Valid driver's license with clean driving record Must be able to lift up to 25 lbs and move up to 50 lbs with assistance Basic hand/shop tools required Preferred But Not Required: Certification in HVAC, Electrical, Plumbing, or related trade RVTI or RVIA certification Experience with diagnostic software or systems used in RV maintenance WHO WE ARE Blue Compass RV is the fastest growing RV Company with more than 100+ RV dealerships across the country! We staff each dealership with the best people in the business. We are known for the great care we take with customers and associates alike. You are not just an associate with our company, you are family. TAG1

Acuren is currently recruiting for UTSW Technicians to help support operations in Akron, OH and surrounding areas. THIS WILL BE A CALLOUT/ TRAVEL POSITION. Successful candidates must be able to travel up to 90% throughout Akron, OH and surrounding ar Technician, Operations, Healthcare, Inspection, Tech

USA Compression Partners, LP, (NYSE: USAC) provides mission critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Summary: A Lead Service Technician (LST) is responsible for maintenance and service of USA Compression equipment reporting to the Area Service Manager. With minimal supervision and significant autonomy, the typical areas of responsibility include developing Field Service Technicians and being a subject matter expert for them, safely performing scheduled maintenance, maintaining and building customer relationships, and providing first line support for equipment troubleshooting. The LST is involved in start-ups, major maintenance, significant failures and high-end trouble shooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and positive workplace aligned with our Pillars culture. Essential Duties and Responsibilities: * Involved in start-ups, major maintenance, significant failures, overhauls, and high-end trouble shooting and advanced diagnostic repair skills on wide variety of equipment. * Lead by example and be a subject matter expert and role model to Field Service Technicians (FST) and assist in their technical skill and professional development. * Ensure USAC maintains run time of natural gas compression units per contractual agreements. * Respond quickly and accurately to customer inquiries and communicate with ASM. * Partner closely with the ASM to ensure a smooth and efficient Area operation. * Maintain and safely operate company vehicle/commercial truck according to company guidelines. * Communicate with sales team to identify new sales, customer or equipment opportunities. * Utilize the WMS and partner with a parts department to ensure sufficient parts inventory for each unit in Area. * Ensure Area units are clean following good housekeeping rules and maintain safe working conditions. * Assist in building the USAC culture through positively representing our image and helping recruit new FSTs. * Assist in supervisory duties in the absence of the ASM or as assigned by the ASM. * Understand and follow company handbook, and all company or customer safety and environmental policies. * Any other duties or responsibilities as assigned by supervisor. Skills/Capabilities and Education: * Technical or trade school certification, college degree or additional work experience in related field. * At least 7 years of experience in gas compression with preference to CAT, Ariel and/or Cummins. * CAT Gas Engine II, Troubleshooting, Electronics certifications; CAT 3500, 3600, ADEM 3 and ADEM 4, Ariel Mechanics 1 and 2, Murphy panel a plus. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Strong interpersonal skills with strong written and verbal skills. * Excellent customer service skills with customer field personnel, onsite vendors, and other employees. * Ability to understand written and verbal communication from the company and supervisor including training, procedures, instructions, etc. * Ability to be self-managed and work independently with little or no supervision. Prior management experience is a plus. * High degree of mechanical ability including electrical and natural gas compression. * Ability to teach and communicate both technical and soft skills to FSTs aiding in their training and development. * Experience reading and understanding technical manuals. * Thorough knowledge of relevant HSE procedures and regulations. * Experience in configuring natural gas compression equipment. * Solid computer and communication technology skills. * Ability and interest in further developing people and business management skills. * Ability and flexibility to work extended hours including periodic on-call weekends. * Applicant must have the ability to legally work in the U.S. Working Conditions: * Typically, an LST's work day consists of driving a USA compression service vehicle to customer locations to perform repair and maintenance activities. * Travel is required up to 75% of the time worked. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stoop, squat, kneel, crouch and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery.

USA Compression Partners, LP (NYSE: USAC) provides mission-critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology-driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Key Business Objectives: 3rd Party Lead Service Technician (LST) is responsible for leading 3rd Party projects, including maintenance and service, as well as overhauls of customer-owned equipment, reporting to the 3rd Party Service Manager. With minimal supervision and significant autonomy, the typical areas of responsibility include leading and developing 3rd-party field service technicians and serving as a subject matter expert for them. This role also involves safely performing scheduled maintenance, maintaining and building customer relationships, and providing first-line support for all projects related to 3rd-party services. The 3rd Party LST is involved in start-ups, major maintenance, significant failures, and high-end troubleshooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and a positive workplace aligned with our Pillars culture. Duties and Responsibilities: * Involved in 3rd Party projects such as preventative maintenance (PM), failures, overhauls, and high-end troubleshooting and advanced diagnostic repair skills on a wide variety of equipment. * Lead by example and be a subject matter expert and role model to 3rd Party Field Service Technicians (FST) and assist in their technical skill and professional development. * Respond quickly and accurately to customer inquiries and communicate with 3rd Party Service Manager. * Partner closely with the 3rd Party Service Manager to ensure a smooth and efficient Area operation. * Maintain and safely operate the company vehicle/commercial truck according to company guidelines. * Utilize the Warehouse Management System (WMS) and partner with a parts department to ensure sufficient parts inventory for each unit in the Area. * Ensure Area units are clean following good housekeeping rules and maintain safe working conditions. * Assist in building the USAC culture through positively representing our image and helping recruit new FSTs. * Assist in supervisory duties in the absence of the 3rd Party Service Manager or as assigned by the 3rd Party Service Manager. * Understand and follow the company handbook and all company or customer safety and environmental policies. * Any other duties or responsibilities as assigned by the supervisor. * Full-time hourly position. Skills/Capabilities and Education: * Technical or trade school certification, college degree, or additional work experience in a related field. * At least 7 years of experience in gas compression with a preference for CAT, Ariel, and/or Cummins. * CAT Gas Engine II, Troubleshooting, Electronics certifications; CAT 3500, 3600, ADEM 3 and ADEM 4, Ariel Mechanics 1 and 2, Murphy panel a plus. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Strong interpersonal skills with strong written and verbal skills. * Excellent customer service skills with customer field personnel, onsite vendors, and other employees. * Ability to understand written and verbal communication from the company and supervisor, including training, procedures, instructions, etc. * Ability to be self-managed and work independently with little or no supervision. Prior management experience is a plus. * High degree of mechanical ability, including electrical and natural gas compression. * Ability to teach and communicate both technical and soft skills to FSTs, aiding in their training and development. * Experience reading and understanding technical manuals. * Thorough knowledge of relevant HSE procedures and regulations. * Experience in configuring natural gas compression equipment. * Solid computer and communication technology skills. * Ability and interest in further developing people and business management skills. * Ability and flexibility to work extended hours, including periodic on-call weekends. * Applicant must have the ability to legally work in the U.S. Working Conditions: * Typically, a 3rd Party LSTs workday consists of driving a USA compression service vehicle to customer locations to perform repair and maintenance activities. * Travel is required for up to 75% of the time worked. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stop, squat, kneel, crouch, and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions, depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations, while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery.

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities * Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. * Assemble equipment per engineered drawings or as instructed by others. * Inspect completed components for accuracy and functionality. * Maintain an orderly work area. * Properly maintain company supplied tooling. * Aid in developing of new procedures and improving existing procedures. * Must understand and comply with all safety rules and company policies of Weatherford. * Work assignments carried out to the highest quality level. * Performs any assembly type functions, using hand or power tools. * May operate both stationary and moving overhead cranes. * Operates any equipment needed to perform job. Experience & Education REQUIRED * 1-2 years prior assembly or manufacturing experience * Mechanical aptitude. * Ability to read blueprints and wiring diagrams PREFERRED * Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED * Good verbal communication skills. * Basic computer skills * Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities · Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. · Assemble equipment per engineered drawings or as instructed by others. · Inspect completed components for accuracy and functionality. · Maintain an orderly work area. · Properly maintain company supplied tooling. · Aid in developing of new procedures and improving existing procedures. · Must understand and comply with all safety rules and company policies of Weatherford. · Work assignments carried out to the highest quality level. · Performs any assembly type functions, using hand or power tools. · May operate both stationary and moving overhead cranes. · Operates any equipment needed to perform job. Experience & Education REQUIRED · 1-2 years prior assembly or manufacturing experience · Mechanical aptitude. · Ability to read blueprints and wiring diagrams PREFERRED · Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED · Good verbal communication skills. · Basic computer skills · Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

TEAM UP WITH US! The Engine Technician III is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations * Remove and install parts, disassemble and assemble components, and test and adjust assemblies with ability to self-monitor work quality. * Mastery level knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * This position requires the ability to provide accurate quotes and pricing estimates to the customer. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical machine and engine repairs and adjustments. * Apply specific failure analysis and procedures in determining proper diagnosis * Test and verify correct operation of all repairs and adjustments. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or five to eight years related experience and/or training; or equivalent combination of education and experience. * Ability to mentor Machine team members Five years of database and project management experience. * Must be able to obtain or currently possess adequate tooling to perform duties. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form and the ability to deal with problems involving concrete variables in standardized situations. * Knowledge of Database software; Internet software; Manufacturing software and Order processing systems. * General knowledge of engines, electrical, electronic, hydraulic, mechanical, pneumatic systems and components. * Must be certified in air-conditioning. * Flexibility to work various schedules including shift work, required overtime and on call. * Successfully complete Work Steps assessment. * Clean driving record and ability to obtain CDL within 90 days of hire for field assignment. * Must be at least 21 to be assigned and operate field vehicle. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic

TEAM UP WITH US! The Engine Field Technician I ( R ) is designated as a "Rotational" position that usually works a designated rotating schedule, usually in patterns such as 14 days "on," and 7 days "off" work. The person must travel to and lodge at the assigned work location for the duration of the 14-day work assignment. This position is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations. * Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision. * Understand and apply CAT reusability guidelines. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical engine repairs and adjustments. * Test and verify correct operation of all repairs and adjustments. * Apply general failure analysis and procedures to determine proper diagnosis. * Complete accurate and timely service reports and timecards daily. * Perform engine and component rebuild with limited supervision. * Use intuition and experience to complement data; Designs work flows and procedures. WHAT YOU'LL NEED: * CAT product knowledge of gas, diesel, electrical, electronic, and mechanical and components. * Proficient use of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * Ability to provide accurate quotes. * Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * General computer literacy. * Valid Driver's license and clean driving record. * Successfully complete Work Steps assessment. * High school diploma or general education degree (GED); or three to five years related experience and/or training (or acceptable combination of these requirements). * Flexibility to work overtime as needed, as well as to fulfill the scheduling structure of a rotational position. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus The employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to extreme heat; risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Required travel up to 100%. This position is considered a safety sensitive position. The job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic

TEAM UP WITH US! The Engine Field Technician II ( R ) is designated as a "Rotational" position that usually works a designated rotating schedule, usually in patterns such as 14 days "on," and 7 days "off" work. The person must travel to and lodge at the assigned work location for the duration of the 14-day work assignment. This position is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations. * Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision. * Understand and apply CAT reusability guidelines. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical engine repairs and adjustments. * Test and verify correct operation of all repairs and adjustments. * Apply general failure analysis and procedures to determine proper diagnosis. * Complete accurate and timely service reports and timecards daily. * Perform engine and component rebuild with limited supervision. * Use intuition and experience to complement data; Designs work flows and procedures. WHAT YOU'LL NEED: * Skills and experience meeting or exceeding the basic requirements of the Engine Field Tech I position. * CAT product knowledge of gas, diesel, electrical, electronic, and mechanical and components. * Proficient use of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * Ability to provide accurate quotes. * Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * General computer literacy. * Valid Driver's license and clean driving record. * High school diploma or general education degree (GED); or five to eight years of related experience and/or training (or acceptable combination of these requirements). * Sucessfully complete Work Steps assessment. * Flexibility to work overtime as needed, as well as to fulfill the scheduling structure of a rotational position. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus The employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to extreme heat; risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Required travel up to 100%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic

TEAM UP WITH US! The Engine Field Tech II is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision. * Understand and apply CAT reusability guidelines. * Timely parts and core returns with appropriate documentation. * Perform warranty downloads of ECM. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical engine repairs and adjustments. * Test and verify correct operation of all repairs and adjustments. * Apply general failure analysis and procedures to determine proper diagnosis. * Accurate and timely service reports and timecards daily. * Perform engine and component rebuild with limited supervision. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or suggest three to five years related experience and/or training; or equivalent combination of education and experience. * AA in Applied Diesel Technology, preferred. * Knowledge of database software, internet software, manufacturing software and order processing systems. * Must be at least 21. * Proficient use of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * Product knowledge of gas, diesel, electrical, electronic, and mechanical and components. * Ability to provide accurate quotes. * Successfully complete Work Steps assessment. * Flexibility to work various schedules including shift work, required overtime and on-call. * Knowledge of Database software; Internet software; Manufacturing software and Order processing systems. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic

TEAM UP WITH US! The Engine Field Technician I is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision. * Timely parts and core returns with appropriate documentation. * Perform warranty downloads of ECM. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical engine repairs and adjustments. * Test and verify correct operation of all repairs and adjustments. * Apply general failure analysis and procedures to determine proper diagnosis. * Perform engine and component rebuild with limited supervision. * Accurate and timely service reports and timecards daily. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. * Proficient use of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * Specific CAT product knowledge of gas, diesel, electrical, electronic, and mechanical and components. * Knowledge of database software, internet software, manufacturing software and order processing systems. * Ability to provide accurate quotes. * Successfully complete Work Steps assessment. * Flexibility to work various schedules including shift work, required overtime and on-call. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The noise level in the work environment is usually moderate Required travel up to 10%. This position is considered a safety sensitive position. The job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic