Painter jobs at NOV - 27 jobs

PRIMARY RESPONSIBILITIES Perform most of the work individually. Essential tools will be provided, however, accountability and maintenance will be the employee's responsibility Work timely and expeditiously to deliver an on-time product without manufacturing errors Perform other duties as directed by leaders and management Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all safety policies and procedures. Follow all OSHA safety regulations and wear prescribed PPE as required. Embrace culture of Lean Manufacturing and the implementation of change Ability to identify and communicate maintenance or product problems to departmental supervision Must be a person of passion and integrity who has the drive to excel and deliver exceptional results, Perform other work-related tasks as assigned. Apply coatings, such as paint, to protect the workpiece surfaces, using spray guns or brushes. Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas. Clean and maintain tools and equipment, using solvents, brushes, and rags. Read blueprints, SOPs, and inspect workpieces to determine work procedures and materials required. Select and mix ingredients to prepare coating substances according to specifications, using mechanical mixers. Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, sandpaper, or cloth. To carry out all duties in accordance with the Quality Assurance procedures and departmental Standard Operating Procedures (SOPs). To contribute to general improvements in the quality of key activities within the department. Comply with all Company and Safety policies and procedures. EDUCATION & EXPERIENCE QUALIFICATIONS High school diploma or equivalent. A minimum of 3 years of experience in a heavy manufacturing environment. A thorough knowledge of Industrial Painting procedures and practices are essential to ensure the quality of the product. JOB REQUIREMENTS Ability to pass a drug screen & background check. Must be willing and able to obtain a painter's certification through internal and/or external sources to perform job responsibilities. Ability to calculate formula using basic mathematics, standard U.S., and Metric Measurements Able read and interpret work instructions, blueprints, manufacturing drawings or similar information Be able to stand for long periods while using spray guns and/or a high-pressure blast hose. Be able to wear a fresh air supplied blast helmet for up to 10-12 hours a day. COMPETITIVE BENEFITS (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. Competitive medical plans that cover your entire family (yourself, eligible spouse, and eligible children) as of your first date of hire for as little as $142 per pay period (bi-weekly.) FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). FREE Basic Life and AD&D insurance (for full-time employees). All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). All regular full-time employees receive up to 11 paid holidays per year.

Benefits: Competitive salary Dental insurance Health insurance About the Role:Join Restoration 1 of Beaumont as a Painter, where your skills will help restore homes and businesses to their former glory. We are looking for passionate individuals to bring color and life back to spaces while ensuring quality and customer satisfaction. Responsibilities: Prepare surfaces for painting by cleaning, sanding, and priming. Mix and match paint colors to achieve desired results. Drywall hanging, taping and texturing Apply paint, varnish, and other finishes using brushes, rollers, or spray equipment. Inspect and maintain tools and equipment for optimal performance. Ensure all work is completed in compliance with safety standards. Collaborate with team members to complete projects efficiently. Provide exceptional customer service during on-site visits. Maintain a clean and organized work environment. Requirements: Proven experience as a painter with a strong portfolio of work. Must be able to perform drywall patch work Knowledge of painting techniques, tools, and materials. Ability to work independently and as part of a team. Strong attention to detail and a commitment to quality. Valid driver's license and reliable transportation. Excellent communication and customer service skills. Physical stamina and ability to lift heavy materials. High school diploma or equivalent; additional certifications a plus. About Us:Restoration 1 of Beaumont has been serving the community for over 10 years, specializing in restoration and remediation services. Our commitment to quality and customer satisfaction has earned us a loyal clientele and a positive work environment where employees feel valued and empowered. Compensation: $26.00 - $38.00 per hour Restoration Support to Help You Get Your Normal Back At Restoration 1, we help people get their property and life back to normal when they're dealing with water, mold, or fire damage. We understand that our customers are going through a taxing and emotionally trying time. This is why our restoration specialists strive to be attentive, offer upfront communication, and valuable services to our customers. Most people struggle to clean up the mess after a disaster such as a flood or fire. We've created a straightforward process to guide our customers through their property restoration. With one phone call, your life can get back to normal. What We Do Our reputation for fast response, exceptional quality, and commitment has contributed to our growth as a company throughout the United States. Our restoration specialists understand that a disaster and the need for property restoration services can come without warning, and that is why we are always at hand to assist you 24/7! Restoration 1 aims to go the extra mile for our customers and make sure their property is back the way they remember it. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Restoration 1 Corporate.

Acuren Inspection is now hiring hard working, dependable Painter to work on a project basis to start as soon as possible. The Technician is responsible for carrying out duties and responsibilities in a safe and timely manner as assigned by the Supervisor. Responsibilities KEY TASKS & GENERAL RESPONSIBILITIES: * Have a comprehensive knowledge Painting/Blasting * Assist other technicians as required * Perform specific job functions as they relate to work orders * Ensure operational safety of all equipment Other work duties as assigned. Requirements KNOWLEDGE, SKILLS & ABILITIES: * Knowledge of coating materials, application techniques, and curing processes * Experience with paint and industrial equipment * Experience using a wet paint gun, hand and power tools, and other painting equipment * The ability to read and interpret blueprints, sketches, and drawings * The ability to read and use coating thickness gages, surface profile gages, dew point meters, soluble salt testers, and hardness or ultrasonic thickness gages EDUCATION: * Previous pipeline experience preferred * NCCER Painter certification a plus * NACE certification a plus Benefits * Competitive salary * Medical, dental, vision, and supplemental insurance * 401K Plan * Paid Holidays * Paid Time Off Working Conditions WORKING CONDITIONS: * Outside environment with continuous physical effort, exposure to 5-7 elements/conditions, moderate mental effort, and occasional requests for assistance. * Willingness to travel and cover projects as needed PHYSICAL JOB REQUIREMENTS & DEMANDS: * Standing and walking for extended periods of time * Ability to climb and work from ladders Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-MC1

Job Purpose The Shop Painter's primary responsibility is to prepare and paint drilling tools and equipment. This entry-level Shop Painter will also cross-train to assemble and repair drilling tools as well as troubleshoot and implement preventative/corrective maintenance on field equipment tools. Roles & Responsibilities Perform cleaning and general cosmetic work on Managed Pressure Drilling equipment Inspect equipment for damage and prep for painting Assist in training less experienced Painters Prioritize workload according to the planned production schedule Prepare tools for shipment and convey materials and items from receiving or production areas to storage/other designated area by hand, forklift, or other means as required and in accordance with operator training Assemble/disassemble product line tools as per procedure or Technical Work Instruction in accordance with Quality standards Troubleshoot and diagnose issues with the tools Implement mandatory modifications and/or preventive and corrective maintenance of the tools/assets Conduct testing of tools/assets to ensure integrity of assemblies Monitor, record, source and re-order day to day spares and consumables associated with the running of the plant Open crates and sort and place materials on racks/shelves/in bins as required Record operational hours on tools/assets in work order system Monitor and source spares and consumable levels to keep the plant operational and cost effective Liaise with the production/shop supervisors and leads, engineering, and other support functions as required, communicating maintenance issues and requirements Maintain daily workshop housekeeping Successfully complete training plan and competency standards as set out in the position within company guidelines Maintain a consistent level of production quality by adhering to manufacturing procedures and work instructions developing corrective action that may reduce ineffective and inefficient operation Perform various other duties and activities assigned by supervisor within the physical constraints of the job Understand and follow maintenance and repair procedures/documentation for applicable products and equipment and complete all relevant documentation Required to be available for any approved overtime outside of normal work schedule Required to be available on call for any urgent needs Experience & Education REQUIRED 2+ years in related painting experience in an industrial environment and preservation Manufacturing, repair and maintenance, or mechanic environment High school diploma or equivalent Ability to operate forklift Ability to operate overhead cranes & jib cranes PREFERRED 2+ years' experience in related product line within Energy sector (MPD or BOP preferred) Knowledge, Skills & Abilities REQUIRED Ability to wear a respirator Basic understanding of rigging equipment Basic computer skills Basic operational knowledge of crane, forklift and materials handling equipment Good communication skills, both verbal and written Ability to work well with team members as well as individually Excellent organizational skills Must be able to follow instructions Ability to lift up to 40 pounds PREFERRED Possess knowledge of workshop tools utilized by facility Knowledge of IPC requirements is a plus #LI-KP1

Job Purpose The Shop Painter's primary responsibility is to prepare and paint drilling tools and equipment. This entry-level Shop Painter will also cross-train to assemble and repair drilling tools as well as troubleshoot and implement preventative/corrective maintenance on field equipment tools. Roles & Responsibilities Perform cleaning and general cosmetic work on Managed Pressure Drilling equipment Inspect equipment for damage and prep for painting Assist in training less experienced Painters Prioritize workload according to the planned production schedule Prepare tools for shipment and convey materials and items from receiving or production areas to storage/other designated area by hand, forklift, or other means as required and in accordance with operator training Assemble/disassemble product line tools as per procedure or Technical Work Instruction in accordance with Quality standards Troubleshoot and diagnose issues with the tools Implement mandatory modifications and/or preventive and corrective maintenance of the tools/assets Conduct testing of tools/assets to ensure integrity of assemblies Monitor, record, source and re-order day to day spares and consumables associated with the running of the plant Open crates and sort and place materials on racks/shelves/in bins as required Record operational hours on tools/assets in work order system Monitor and source spares and consumable levels to keep the plant operational and cost effective Liaise with the production/shop supervisors and leads, engineering, and other support functions as required, communicating maintenance issues and requirements Maintain daily workshop housekeeping Successfully complete training plan and competency standards as set out in the position within company guidelines Maintain a consistent level of production quality by adhering to manufacturing procedures and work instructions developing corrective action that may reduce ineffective and inefficient operation Perform various other duties and activities assigned by supervisor within the physical constraints of the job Understand and follow maintenance and repair procedures/documentation for applicable products and equipment and complete all relevant documentation Required to be available for any approved overtime outside of normal work schedule Required to be available on call for any urgent needs Experience & Education REQUIRED 2+ years in related painting experience in an industrial environment and preservation Manufacturing, repair and maintenance, or mechanic environment High school diploma or equivalent Ability to operate forklift Ability to operate overhead cranes & jib cranes PREFERRED 2+ years' experience in related product line within Energy sector (MPD or BOP preferred) Knowledge, Skills & Abilities REQUIRED Ability to wear a respirator Basic understanding of rigging equipment Basic computer skills Basic operational knowledge of crane, forklift and materials handling equipment Good communication skills, both verbal and written Ability to work well with team members as well as individually Excellent organizational skills Must be able to follow instructions Ability to lift up to 40 pounds PREFERRED Possess knowledge of workshop tools utilized by facility Knowledge of IPC requirements is a plus #LI-KP1

Apply Description Kaspar Outdoors Job Description: Product Painter Are you passionate about craftsmanship and precision in your work? Does the idea of turning raw materials into beautifully finished products excite you? Do you enjoy working in a team that supports innovation in the outdoor and firearms industry? Do the values of stewardship, versatility, and family resonate strongly with you? Do you find the improvement of people's lives through stewardship of God-given resources inspiring? Then Kaspar Outdoors is right for you! Product Painter Job Summary As a Product Painter at Kaspar Outdoors, you will be responsible for preparing and painting high-end products that support the outdoors and firearms industry. You will utilize expert surface preparation techniques and enamel-based coatings to enhance both the appearance and durability of our products. Product Painter Responsibilities • Prepare surfaces for painting, including sanding for approximately 4 hours daily. • Apply specified enamel coatings to products on the assembly line prior to heat processing. • Operate painting equipment to ensure proper enamel flow and application. • Inspect painted products to maintain high standards of quality and finish. • Utilize lifting and moving equipment as needed for efficient workflow. • Adhere to all safety protocols and consistently wear appropriate PPE, including safety glasses and face masks. • All other duties as assigned by management. Product Painter Skills and Competencies • Willingness to learn and grow under mentorship. • Detail-oriented with strong time management skills. • Team-focused mindset with a positive attitude. • Ability to build and paint stocks. • Strong appreciation for the aesthetic and artistic value of custom products. Product Painter Qualifications • High school diploma or GED required. • Experience in painting and surface preparation. • Familiarity with industrial painting equipment. • Strong understanding of and respect for firearms safety. • Ability to work efficiently in a fast-paced environment. • Good manual skills and mechanical aptitude. • Background in or interest in the firearms and outdoor industries preferred. • Must sign non-compete and non-disclosure agreements. • Ability to lift 40 lbs. and stand for extended periods. • Possess a clean 5-year driving record with no infractions in the past three years. Work Environment This role involves working indoors and outdoors in varying conditions, including exposure to paint fumes and loud environments. Proper protective equipment must be worn at all times. Physical Requirements • Frequent standing and walking. • Regular lifting of up to 40 lbs. • Ability to perform repetitive motions and use tools and equipment for extended periods. Benefits • Health Insurance • Vision Insurance • Dental Insurance • 401k • Paid Time Off • Profit Sharing • Counseling

Description: Kaspar Outdoors Job Description: Product Painter Are you passionate about craftsmanship and precision in your work? Does the idea of turning raw materials into beautifully finished products excite you? Do you enjoy working in a team that supports innovation in the outdoor and firearms industry? Do the values of stewardship, versatility, and family resonate strongly with you? Do you find the improvement of people's lives through stewardship of God-given resources inspiring? Then Kaspar Outdoors is right for you! Product Painter Job Summary As a Product Painter at Kaspar Outdoors, you will be responsible for preparing and painting high-end products that support the outdoors and firearms industry. You will utilize expert surface preparation techniques and enamel-based coatings to enhance both the appearance and durability of our products. Product Painter Responsibilities • Prepare surfaces for painting, including sanding for approximately 4 hours daily. • Apply specified enamel coatings to products on the assembly line prior to heat processing. • Operate painting equipment to ensure proper enamel flow and application. • Inspect painted products to maintain high standards of quality and finish. • Utilize lifting and moving equipment as needed for efficient workflow. • Adhere to all safety protocols and consistently wear appropriate PPE, including safety glasses and face masks. • All other duties as assigned by management. Product Painter Skills and Competencies • Willingness to learn and grow under mentorship. • Detail-oriented with strong time management skills. • Team-focused mindset with a positive attitude. • Ability to build and paint stocks. • Strong appreciation for the aesthetic and artistic value of custom products. Product Painter Qualifications • High school diploma or GED required. • Experience in painting and surface preparation. • Familiarity with industrial painting equipment. • Strong understanding of and respect for firearms safety. • Ability to work efficiently in a fast-paced environment. • Good manual skills and mechanical aptitude. • Background in or interest in the firearms and outdoor industries preferred. • Must sign non-compete and non-disclosure agreements. • Ability to lift 40 lbs. and stand for extended periods. • Possess a clean 5-year driving record with no infractions in the past three years. Work Environment This role involves working indoors and outdoors in varying conditions, including exposure to paint fumes and loud environments. Proper protective equipment must be worn at all times. Physical Requirements • Frequent standing and walking. • Regular lifting of up to 40 lbs. • Ability to perform repetitive motions and use tools and equipment for extended periods. Benefits • Health Insurance • Vision Insurance • Dental Insurance • 401k • Paid Time Off • Profit Sharing • Counseling Requirements:

We are seeking a skilled Industrial Painter to join our team. The ideal candidate will have experience in both conventional and airless painting techniques, with a strong ability to prepare materials and measure paint thickness accurately. Responsibilities Prepare surfaces and materials for painting, including cleaning, sanding, and masking. Mix paint according to specifications and ensure proper consistency and color. Apply paint using conventional and airless spray equipment. Measure paint thickness to ensure compliance with quality standards. Maintain equipment and work area in a clean and safe condition. Follow safety protocols and company procedures at all times. Requirements Proven experience with conventional painting methods. Experience operating airless paint spraying equipment. Ability to accurately measure paint thickness using appropriate tools. Knowledge of surface preparation techniques. Ability to mix paint according to manufacturer guidelines. Attention to detail and commitment to quality workmanship. Strong understanding of safety standards related to painting operations.

Wood is currently sourcing for a Painting and Coating Journeyman to join our team in Carlsbad, NM. Authorization to work in the US lawfully without sponsorship from Wood is required. Responsibilities Must be able to blast media, prep, prime, topcoat (roller and spray gun) Always follow the rules of safe conduct Accurately interpret and apply information from work orders, job orders, and specifications Identify, recognize, and demonstrate safe usage of hand tools and power tools appropriate for the job Ensure work is executed in accordance to agreed guidance documents (i.e. work packs, work instructions, procedures), manufacturer' recommendation Ensure all equipment is in fit-for-purpose condition and quarantine any defective materials Monitor paint materials and highlight any overages/shortages to Offshore Fabric Maintenance Supervisor Ensure coatings are applied in accordance to governing specifications, including manufacturer's recommendations and that QA/QC checks are performed in accordance to Wood's Coating Application Procedure Recognize various materials used in the craft and demonstrate a working knowledge of appropriate material handling techniques Identify, recognize, and demonstrate safe usage of appropriate personal protective equipment for the craft Demonstrate knowledge and skills with installation of various types of Insulation as listed: Fiberglass, Calcium Silicate, Urethane (PolyISO), Cellular Glass, Expanded Perlite Demonstrate knowledge and skill with the installation of metal jacketing on industrial piping and equipment including but not limited to cutting metal for tees, 90's, 45's, reducers, vessel/tanks including heads, straight runs of piping, etc Read specifications or receive instructions from supervisors or clients in order to determine work requirements The employee must participate in safety meetings, safety programs and the quality process The employee must clean up all the work area at the end of the day or at the completion of the job Must be able to blast media, prep, prime and topcoat with roller and spray gun Qualifications Preferably 5+ years' related experience in an industrial maintenance environment Must have experience in blast media, prep, prime, topcoat (roller and spray gun) The employee must be capable of directing the other employees that will be associated with this job to assure that safety, quality, and production are achieved Experienced in the application of coatings in an offshore environment NACE Coating Inspector Certification considered an asset

Painter About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Prepare and apply industrial coatings to components and assemblies, all in accordance with ProEnergy and customer engineering standards and specifications. Reports To: Fabrication Manager Work Location: 6246 McHard Road, Houston, TX 77053 Position Responsibilities Sand and prep for paint, new and used parts and surfaces. Use airless and air supplied paint guns to paint new and used parts and surfaces. Mix and spray the correct paint per specifications. Know how to properly block, sand or featheredge existing coatings for refinishing. Mask surfaces to minimize tapelines, and overspray. Sand and buff all painted surfaces. Metal straightening and repair. Required Qualifications Vocational and or Technical certification. 2+ years related work experience. Be able to work with minimal supervision. Be able to closely follow verbal and written instructions. Technical competence (understand software, hardware, networks, etc). Must have basic metal straightening and repair skills. Must have experience with airless and air supplied paint guns. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Successful candidate will need to satisfactorily complete pre-employment drug screen and background check Desired Qualifications Mental requirements (analyzing, interpreting, organizing, problem solving, etc.) Equipment use (air grinders, drills, abrasive blasting, computer, forklift, pallet jack, airless spray equipment etc.) Working conditions (indoors/outdoors, noisy environment, dusty, etc.) Must have good hand to eye coordination. Must be able to pay attention to detail. Must learn how to use basic pneumatic grinding tools. Use basic hand tools for disassembly/assembly. Use lifting equipment. Ability to read, understand and follow instructions verbally and/or written (traveler) in English. Good communication and interpersonal skills. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

SUMMARY: Responsibility for refinishing vehicles to meet pre-accident condition or industry standards of quality. ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties beyond this representative listing may be assigned to the essential job duties and responsibilities of this position based on Company needs. Make an effort to have an efficiency of 110% 115% or better every week. 44 hours flagged for every 40 hours clocked = 110% efficiency. Keep area safe and clean. Follow all safety measures for personal and environment safety. Wear all safety equipment for eyes (goggles), hands (gloves), face shields, lungs respiratory, and dust masks. Examine damaged vehicles and estimates cost of repairs. Reports any hidden damage to supervisor immediately. Report any lost or broken parts to the supervisor. Maintain all body shop equipment in good safe working condition. Maintain spray booth and mixing equipment. Keep mixing room in good working condition. Check body repairs before primer is applied. Maintain a level of quality to industry standards. Keep repaints to a minimum. Must remove all dirt and runs from painted area 2-3 dirt specks per panel. Clean paint areas and tools and equipment. Maintain proper stocking levels of paint and materials. Maintain a 25% gross profit margin or higher on paint and materials. Color match (tint) and mix paint. Keep production manager aware of status. Clean grease and dirt from product. Apply masking tape over parts and areas that are not to be coated. Fill cavities and dents with putty to attain smooth surface. Ability to multi-task under pressure. Alert the production manager to any unusual problems and delays. Must demonstrate positive corporate citizenship and the Rush Driving Principles. Maintain safe work environment. Maintain professional appearance. As a condition of continued employment, the employee is required to exhibit positive corporate citizenship, with demonstrated ability to positively interact with others, follow required Company policies and procedures which include but are not limited to policies regarding conduct, record keeping, and safety. As a condition of continued employment the employee is required to refrain from any behavior that is construed as sexual harassment, harassment and/or creating or participating in a hostile work environment, and/or violence in the workplace. QUALIFICATIONS AND POSITION REQUIREMENTS: The individual must be able to perform each essential duty satisfactorily. It is required that the individual is accurate with good time management and organizational skills. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High School Diploma or General Education Degree (GED). Minimum of 2-3 Years related work experience in a similar position. May substitute the equivalent combination of education and training Certificates, Licenses and Registrations: Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier. Language Skills: Ability to read and comprehend simple instructions; correspondence; memos and various operating or procedural manuals. Ability to write routine reports and/or correspondence. Ability to effectively present information in one-on-one and/or group situations to customers, clients and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to apply understanding to carry out instructions furnished in written, oral or diagram form. Ability to apply common-sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving few concrete variables in standardized situations. Ability to make decisions consistent with business practices and in the best interest of the Company within the scope of the job responsibilities. Other Skills and Abilities: Proficiency with related hardware/software systems as needed to fully execute the duties required. General office skills and knowledge of equipment and systems including but not limited to filing systems, use of copiers, facsimile machines, postage meters telephone systems and other communication or electronic equipment as may be applicable. PHYSICAL DEMANDS: The physical demands described are representative of those that must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions at the request of the employee, and with appropriate medical certification. While performing the duties of this job the employee is regularly required to sit, stand, and use hands to finger, handle, or feel objects, tools and/or controls. The employee is frequently required to stand; sit; walk; reach with hands and arms; climb or balance; and talk or hear. The employee is required to stoop, kneel, crouch, push/pull, or crawl. The employee must regularly be able to with assistance lift and/or move more than 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable the individual with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. CCFT is an equal employment opportunity employer.

Position Type: Full-time, Non-Exempt, Hourly Reports to: Fabrication Manager Supervisory Responsibility: None Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power. systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To operate and maintain spray painting and sandblasting equipment for application of various industrial coating methods. Essential Functions Fluent in the understanding of coating product data sheets and the related SDS sheets, how the requirements will be met and the application o(said products in a safe I timely fashion. Understands SSPC Standards and how they apply surface coating documentation to NACE Standards. Operate and maintain all equipment, paint, ventilation, compressed air, blast, and PPE; related to the application of sprayed, rolled and brushed products in the industrial environment. To include but not limited to: Various Urethanes Industrial Zinc Epoxy's Industrial Alkyds Inorganic and Organic Zinc-Rich Primers Acrylics Enamels Comprehend Mil Spec requirement, measurement policy and maintenance of required reporting documentation. Understand how humidity, temperature, surface profile, etc. affects final product and measure/ monitor throughout workflow process for reporting documentation. Operate overhead cranes and/or forklifts, while adhering to industry standard practices of safe rigging systems and techniques. Accountability for completion of daily work assignments while monitoring quality, safety and health regulations. Safely and efficiently direct and monitor one or more helpers. Documentation of all quality reporting methods employed per SEA Quality Standard Complies with all company policies, procedures, and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication Proficiency; Written and Verbal Ethical Conduct Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 1O pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with the exception to local travel during the business day. Required Education and Experience • High school diploma or GED • 5+ Years' related experience or training Preferred Education and Experience • 3+ Years' experience in Industrial Coatings. • Some vocational technical training is desired. • Ideal candidates should have NACE and SSPC Industrial Painting Certification Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check, and random drug screening consent. Work Authorization Must be authorized to work in the USA Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Our Mission: Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Maintain and refurbish mechanical assemblies. Key Duties and Responsibilities: Conduct quality assurance on finished rental equipment before send out. Coordinate with Inside Sales to ensure deadlines are met. Work with the Operations Manager to maintain proper stocking levels of spare parts and accessories needed for department. Maintain and refurbish pneumatic, hydraulic, mechanical and electric powered machinery. Maintain and repair material handling machinery Painting of all fabricated products per requirements Maintain clean and safe work environment. Evaluate and make recommendations regarding repairs. Other functions as required. Job Requirements: Must possess the ability to work in elevated areas Must possess the ability to use hand tools and trade type tools Ability to identify and resolve mechanical problems Ability to operate a forklift Must be authorized to work in the United States without sponsorship Must be able to pass a pre-employment drug test, physical, and background check Bishop Lifting Products, Inc. and it's subsidiaries are an Affirmative Action and Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We're ready to help you start your new career path.

Our Mission: Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Maintain and refurbish mechanical assemblies. Key Duties and Responsibilities: Conduct quality assurance on finished rental equipment before send out. Coordinate with Inside Sales to ensure deadlines are met. Work with the Operations Manager to maintain proper stocking levels of spare parts and accessories needed for department. Maintain and refurbish pneumatic, hydraulic, mechanical and electric powered machinery. Maintain and repair material handling machinery Painting of all fabricated products per requirements Maintain clean and safe work environment. Evaluate and make recommendations regarding repairs. Other functions as required. Job Requirements: Must possess the ability to work in elevated areas Must possess the ability to use hand tools and trade type tools Ability to identify and resolve mechanical problems Ability to operate a forklift Must be authorized to work in the United States without sponsorship Must be able to pass a pre-employment drug test, physical, and background check Bishop Lifting Products, Inc. and it's subsidiaries are an Affirmative Action and Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We're ready to help you start your new career path.

Job Description Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: The Painter is responsible for applying industrial paint finishes to metals or manufactured products. This includes mixing paints and other solutions and monitoring drying to ensure desired results. This role is essential for achieving the desired aesthetic and protective qualities of our products. The ideal candidate has a high school diploma or GED and at least one year of general work experience, with formal training in production painting being a plus. This is a full-time position. (#INDMFG) Hours: Friday - Sunday 6am - 6:30pm What You'll Be Working On: Painting Operations: Operating a spray painter or other equipment to apply industrial paint finishes on metals or manufactured products. May paint by hand when needed. Paint Preparation: Mixing paints and other solutions. Finishing Processes: Completing finishing with baking, polishing, or other materials. Quality Control: Monitoring drying to ensure desired results. What You'll Bring to the Team: Education: High school diploma or GED. Experience: 1+ years of general work experience. Physical Requirements: Requires lifting, lowering, pushing, and pulling all sizes of merchandise up to 50 lbs. Requires the ability to stand, walk, stoop, & bend for 8 hours or more daily. Requires constant use of arms, hands, fingers, eyes, legs, and back. Safety Compliance: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Respirator Medical Evaluation: As a condition to employment, applicants who receive a job offer are required to submit to a medical evaluation to confirm their ability to wear a respirator. Company Values: Our Company values speak to you, resonate with you, make sense to you and how you desire to work. Soft Skills: Must be detail oriented. Must be a team player willing to take on additional roles as needed. Have a good attitude and willingness to learn. Bonus Points: Apprenticeship and/or formal training in production painting. Strong organizational/follow-up skills. Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc Pet-friendly offices 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $50 per pay period Compensation: Compensation will be paid in the range of $19-$27/hr. Restricted Stock Units are included in all offers. Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: The Painter is responsible for applying industrial paint finishes to metals or manufactured products. This includes mixing paints and other solutions and monitoring drying to ensure desired results. This role is essential for achieving the desired aesthetic and protective qualities of our products. The ideal candidate has a high school diploma or GED and at least one year of general work experience, with formal training in production painting being a plus. This is a full-time position. (#INDMFG) Hours: Friday - Sunday 6am - 6:30pm What You'll Be Working On: Painting Operations: Operating a spray painter or other equipment to apply industrial paint finishes on metals or manufactured products. May paint by hand when needed. Paint Preparation: Mixing paints and other solutions. Finishing Processes: Completing finishing with baking, polishing, or other materials. Quality Control: Monitoring drying to ensure desired results. What You'll Bring to the Team: Education: High school diploma or GED. Experience: 1+ years of general work experience. Physical Requirements: Requires lifting, lowering, pushing, and pulling all sizes of merchandise up to 50 lbs. Requires the ability to stand, walk, stoop, & bend for 8 hours or more daily. Requires constant use of arms, hands, fingers, eyes, legs, and back. Safety Compliance: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Respirator Medical Evaluation: As a condition to employment, applicants who receive a job offer are required to submit to a medical evaluation to confirm their ability to wear a respirator. Company Values: Our Company values speak to you, resonate with you, make sense to you and how you desire to work. Soft Skills: Must be detail oriented. Must be a team player willing to take on additional roles as needed. Have a good attitude and willingness to learn. Bonus Points: Apprenticeship and/or formal training in production painting. Strong organizational/follow-up skills. Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc Pet-friendly offices 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $50 per pay period Compensation: Compensation will be paid in the range of $19-$27/hr. Restricted Stock Units are included in all offers. Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Quality assurance: Monitor and verify that all painting and coating applications conform to project specifications and industry standards. Surface and environmental checks: Inspect surface preparation and monitor environmental conditions like temperature, humidity, and dew point before and during application. Performance testing: Conduct various tests, including checking coating thickness, adhesion, curing times, and visual inspection for defects. Documentation: Maintain detailed records of inspections, test results, material certifications, and corrective actions. Material verification: Ensure the correct materials are used by checking material certifications and verifying proper storage and handling. Issue resolution: Collaborate with contractors and project engineers to identify and resolve coating-related problems and ensure rework meets specifications. Final inspection: Conduct final inspections to confirm the finished work meets all quality requirements for finish, coverage, and overall quality.

Paint Supervisor About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Position Summary Effectively manage the PROENERGY paint shop with the aim of achieving optimum quality and customer satisfaction. Reports To: Fabrication Manager Work Location: 8310 McHard Road, Houston, TX 77053 Position Responsibilities Supervise Paint Shop employees and manage daily operations. Order and maintain paint supplies and equipment, ensuring the shop stays organized and well-maintained. Oversee all surface preparation work before painting. Ensure all work meets safety, legal, customer, and internal PES standards. Deliver excellent customer service and promote positive work practices within the shop. Meet performance goals and production targets. Motivate and support team members to achieve Key Performance Indicators (KPIs). Supervisor Expectations Communication Communicate clearly and effectively with employees and other departments. Conduct both formal and informal evaluations of direct reports. Make sure employees understand expectations for safety, quality, and productivity. Share company updates, policies, and performance expectations with the team. Collaborate with other supervisors and participate in daily pass-down meetings. Reporting and Administration Ensure all safety incidents and near misses are reported and escalated according to company policy. Oversee quality reporting, including NCRs, redlines, and part inspections. Maintain accurate timekeeping, approve payroll, and manage PTO requests. Submit Helpdesk tickets and request tools or consumables as needed. Communicate and document schedule progress. Write mid-year and annual performance reviews for direct reports. Prepare documentation for performance or disciplinary actions when necessary. Continuous Improvement Lead and participate in shop improvement teams and follow through on action items. Maintain and enhance 5S standards throughout the shop. Address and correct policy or behavior issues promptly and escalate when needed. Recognize and communicate strong performance from individuals or teams. Suggest and share ideas for design or process improvements. Track and report manpower hours and performance against goals. Required Qualifications Minimum high school diploma or GED, or relevant work experience in lieu of education. Material handling equipment experience: Must have ability to operate forklift safely. Must have the ability and knowledge to rig properly and safely run an overhead style crane. Minimum of six months experience with either supervising or providing technical direction to a team. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Successful candidate will need to satisfactorily complete pre-employment drug screen and background check Desired Qualifications Associate degree from two-year college in a related technical field or certificate or diploma from trade school in related field and 5+ years' experience in industrial painting or equivalent combination of education and experience. 3 + years' experience with directly supervising maintenance staff. Experience carrying out responsibilities in accordance with the organization's policies and applicable laws. Technical competence including understanding software, hardware, networks, etc. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

Required to perform the highest quality surface preparation using all types of metal finishing equipment. Must setup, operate, and maintain blasting and other types of surface preparation equipment. Must have the ability to interpret technical requirements of surface preparation and be capable of verifying surface finish for acceptance to applicable specifications and standards. Essential Job Responsibilities/Duties: Work in a safe manner using all required personal protective equipment (PPE). Use all types of preparation equipment and supplies. Work from drawings, work orders, and instructions covering production parts or tooling requirements. Record time and production on proper forms and/or in computer systems. Handle material movements as needed by hand, crane, forklift, or other material handling equipment. Make necessary adjustments and perform routine maintenance necessary for proper care of equipment. Mark material identification as required. Keep work area in clean and orderly condition. Communicate with supervision on status of work, train new personnel as required. Other duties as assigned. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, work at heights and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse/factory or external loading areas. Be able to wear personal protective equipment (PPE) including safety glasses, hearing protection, helmet, gloves, safety toed shoes, respirators and powered air systems. Supports: All shops. Minimum and Preferred Qualifications: High school diploma or GED. Prior experience in an industrial spray painting operation is preferred; experience in automotive painting is a plus. Prior experience with work order computer data entry systems.