National Power jobs in Raleigh, NC

BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Schedule: Monday - Friday 2:30am 6am start time May occasionally have an over night shift Our delivery drivers start at $31.23 hour. After completion of probation period, wage increases to $33.73 hour! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.23 and $33.73 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Territory Manager to join our family. As a Territory Manager, you will be responsible for servicing and managing relationships with customers. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: • Provide consistent and timely service to customers in your territory. • Service 10-15 customers per day in a company vehicle. • Accommodate a customer's needs with products that will help provide a safe, pleasant, and productive workplace. • Organize and implement a “work plan” for maximizing daily sales and decreasing mileage between calls. • Maintain an adequate supply of promotional materials, flyers, and business cards. • Maintain a call average that is consistent with current company objectives. • Maintain and turn in paperwork in a timely manner. • Mail or email work orders, call reports, and vehicle maintenance reports as required. • Keep handheld computer data updated and in compliance with company policy. • Keep abreast of all price changes and sell accordingly. • Maintain a consistent paper flow by avoiding errors on paperwork submitted. • Maintain adequate vehicle stock and rotate accordingly. • Adhere to the company vehicle maintenance schedule and policy. • Understand and comply with all company policies. • Have proper tools and supplies such as; anchors screws, screwdriver(s) Hammer and a charged drill on van in order to install equipment within a customer's facility. • Maintain a clean company vehicle inside and out to promote a good company image. • Manage your geographical territory and notify management of any territory problems. • Promote growth by continuously making cold calls and developing new businesses. • Keep up to date about competitive companies, their products and prices • Continuously gain knowledge of First Aid + Safety products. • Share pertinent information about pricing and products with other employees during sales meetings. Qualifications What we're looking for: • Must be at least 21 years or older. • Valid non-commercial driver's license and safe driving record is required. • 1-3 years of B2B sales experience or equivalent is preferred. • Must be knowledgeable in basic computer and tablet skills and be proficient with Microsoft Word and Excel. • Ability to lift and carry up to 40 lbs. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 25682 Job Responsibilities PURPOSE: Move, build, install, and demolish equipment and mechanical services. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Millwright A. Reports directly to the department Manager. • Performs all tasks under general supervision. • Provides training and assistance to less experienced Millwrights. • Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., mechanical, plumbing, carpentry). • Maintains current knowledge of all applicable procedures and safety measures. • Installs, modifies, moves, and dismantles machinery and equipment according to requisition documentation, layout plans, blueprints, or other drawings. • Prepares installation site by constructing foundations and aligns and fastens machinery to the foundation using hoists, dollies, rollers, trucks, tools, squares, rules, and micrometers. • Perform field welding and fabrication during equipment installations or modifications. • Responsible for safely demolishing unused equipment and services. • Oversee construction contract and service work as assigned. • Order construction material as required. • Assist with keeping neat and orderly records on work performed. • Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. • Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. • Perform work assignments efficiently while being consistent with good safety practices. • Report any maintenance and/or safety issues to supervisor. • Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. • Other duties as assigned by the department Manager. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements • High School education or equivalent. • Must have a basic level of knowledge and experience reading mechanical drawings and installation manuals. • Must have a basic level of knowledge and experience in rigging, leveling, and lagging of machinery. • Must have a basic level of knowledge and experience in proper piping materials, methods, and installation. • Must have a basic level of knowledge and experience in proper welding and fabrication techniques. • Ability to use various measuring devices (tape measure, micrometers, levels, plumb bobs, etc.) • Excellent attendance required. • Must possess basic mechanical aptitude. • Must possess good organizational and communication skills. • Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. • Capable of lifting up to 75 pounds on an occasional basis. • May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) • Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. • Must be able to wear a respirator. • Must be willing to continuously improve technical skills and knowledge. • Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27300 Purpose To design, develop and evaluate welding machines and associated processes; to conduct applied research into new areas of welding machine design and/or on new welding processes. Job Duties and Responsibilities Utilizes and applies experience in a broad range of fields to understand weld machine development process and interactions between machine design and weld process development/optimization; collaborates with team members and members of the department, providing the benefit of this understanding to enhance the execution of projects Develops new welding machines, software, welding processes and/or test methodologies in accordance with company policies/procedures and in consideration of: Market needs, requiring direct interface with customers, sales and marketing Industry codes, standards, and specifications, and Manufacturing process capabilities, requiring direct interface with manufacturing and methods personnel Establishes standards and methodologies for and conducts evaluations of product performance Develops/refines test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking Facilitates development of manufacturing process capabilities to support introduction of new products Works with minimal direct supervision, conferring with superiors as needed; has appreciable latitude for independent action or decision May provide task oriented direction to Technicians, Technologists and/or Engineers Level I/II/III in the execution of development projects Structures projects for and provides supervision and mentoring to Engineering Interns Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings, seminars, and conferences Basic Requirements Baccalaureate degree in Engineering (or equivalent). Degree in Welding Engineering preferred. Minimum 8 years engineering experience. Processes and applies a broad knowledge of engineering and scientific principles, practices and procedures, within the field of specialization, to the completion of difficult assignments. Computer literate with working knowledge of MS Word, MS Excel, MS Access and MS PowerPoint, as a minimum. Possesses and applies both practical and fundamental understanding of various arc welding processes. Experience with Robotic Programming. Experience with numerical modeling tools including Python is a plus. Excellent written and verbal communication skills. Works effectively in a cross-functional team environment Job Rate: Salary Grade ***The established grade and range for this job is listed above. All applicants should understand that, if selected for a posted job, the actual pay rate will generally fall within the range of the stated grade. Most typically, the pay rate will be set towards the lower end of the range and may vary slightly, depending upon candidate qualifications. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($45,968.00 - $68,952.00) Target Bonus: % Req ID: 27455 Purpose Initiate, support, and lead Production Team activities targeting Quality continuous improvement and assurance within Machine Division. Reports to Quality Assurance Supervisor. Job Description Promote an atmosphere of continuous process and employee improvement. Support or drive Continuous Improvement activities. Enforce Quality standards in all facets of the assigned areas. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Follow all significant product, document and process changes which affect Quality. Work with departmental supervision in developing and maintaining a trained work force. Support Manufacturing Engineering, Manufacturing, and Research and Development in the Design, Introduction, Inspection and Maintenance of new and existing equipment. Define, troubleshoot and assist in the measurement and resolution of daily production Quality problems. Must have an uncompromising attitude towards Quality. Maintain manufacturing Quality performance metrics and/or Quality records. Help production departments manage Quality aspects of Stop Shipment process. Take active role in Stop Ship investigations and Stop Ship rework tracking/coordination. Take active role in analysis of scrap and yield opportunities. Perform work center, finished product and process audits, as required. Create Process Maps. Initiate CAPA Determinations. Report safety near misses and incidents whenever applicable. Basic Requirements Technician III: Vocational training and 5+ years of experience in a relevant work environment is required; or High School Diploma/GED with 7+ years experience in a relevant work environment. a. Completes a variety of atypical assignments b. Works with a limited degree of supervision, with oversight focused only on complex new assignment c. Acts as an informal resource for colleagues with less experience Technician IV: Vocational training and 8+ years of experience in a relevant work environment is required; or High School Diploma/GED with 10+ years' experience in a relevant work environment. a. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience b. Works autonomously within established procedures and practices c. May act as a lead, coordinating and facilitating the work of others Ability to work effectively and cross-functionally on the shop floor on a regular basis. Demonstrated computer skills in MS Office and Windows operating system. Ability to develop and maintain records and to follow projects through to conclusion. Basic understanding and knowledge of manufacturing engineering and Quality standards. Ability to use measurement and inspection tools such as Calipers, Micrometers, Pins, Gauges, Protractor, and Scale. Capable of frequent standing and walking and lifting up to 60 lbs. Must have excellent attendance, safety and work record. Ability to work rotating shifts. Environmental, Health and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Training Requirements Additional training in Quality Management System, REQ1, OP114, OP191, OP203, applicable work instructions and any others as needed. Additional training in Six Sigma methodology, 5S, Lean, Root Cause Analysis, Process Mapping, Lincoln Electric Service School, as required. See RE150 for complete list of training requirements. Personal Protective Equipment: PPE per EHS 560. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Manage day-to-day HR operations. Support supervisors and managers, providing HR advice regarding policies and procedures. Plan and ensure facilitation of training, coordinating training schedules. Ensure compliance with required annual training. Ensure compliance and practices of company's basic upward and downward communication promoting a work environment of trust and goodwill. Assist with retention initiatives, focusing on enhanced orientation and job training. Audit HR functions, ensuring compliance with Company policies and guidelines. Conduct investigations ensuring complaints are recorded and properly maintained. Promote community relations throughout the community. All other relevant duties to the job. High School Diploma required; Bachelor Degree in HR, Business or other closely related field preferred. 4+ years HR, employee engagement and relations experience; preferable within a similar manufacturing environment. Excellent communication and interpersonal skills. Excellent knowledge of federal and state employment law (i.e., Title VII, EEOC, ADAA, FMLA, etc.). Excellent conflict resolution skills. Strong technology and computer skills. Organized with attention to detail.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27546 Purpose Troubleshoot, repair, inspect, and maintain power transmission, hydraulic, and pneumatic components on production equipment and systems. Job Description (Duties and Responsibilities) Mechanically troubleshoot, repair and maintain all types of industrial machinery, equipment and systems. Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely. Performs equipment failure analyses (including preventative and unscheduled maintenance). Plan and implement preventative and predictive maintenance programs to maximize equipment up time. Perform bench work in repairing and maintaining production equipment and spare part assemblies. Keep neat orderly records and order spare parts. May be required to train fellow tradesmen. Must be able to rotate shifts and work weekends and holidays as required. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Associate degree in Mechanical Technology is preferred or equivalent job experience. Must pass the skilled trades assessment test for this position. Must have some knowledge of mechanical troubleshooting including power transmission, fluid power, and pneumatics. Ability to read, write, and understand written specifications, procedures and prints. Ability to design and execute from verbal instructions. Must possess good organizational and communication skills. Must possess good mechanical aptitude and have the ability to work on close tolerance equipment and/or parts. Ability to use various measuring devices (torque wrench, micrometers, Vernier calipers, dial indicators etc.) Must be able to use math to calculate dimensions and determine equipment setups. Ability to fabricate, weld, or machine parts preferred. Ability to operate basic shop equipment (hoist, forklift, scissor lift, etc.) preferred. Excellent attendance required. Safety and quality conscious. Capable of lifting up to 75 pounds on an occasional basis. Must be able to work in confined areas, climb ladders, and work at heights of 28 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge of plant equipment and systems. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

THIS IS A 2ND SHIFT POSTION. Deliver feed between feed mills, growers and other required destinations. Perform pre-trip inspections to ensure the safety of your loads. Comply with established Company fueling procedures. Communicate with dispatchers on a regular basis. Comply with DOT, company, biosecurity, FSMA, local, state and federal laws, policies, practices and procedures. All other relevant duties to the job. Class A Commercial Driver's License required. 1+ year(s) verifiable commercial driving experience required. Clean motor vehicle driving record required.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 26250 Employment Status: Salary Full-Time Req ID: 27769 Primary Function Supports sales and estimating activities in the Defense industry segment with a particular emphasis on the U.S. Navy, in particular replacing cast and forged components with additively manufactured components, by fostering key customer relationships, identifying new business opportunities and customers, creating proposals and quotes, negotiating and closing sales, and maintaining knowledge of current market conditions and technologies. Job Duties Interact with customers, sales, estimating and engineering team members to generate quotes, and maintain customer relationships. Assist in reviewing DOD contracts and technical publications/specifications. Use state-of-the-art CAD and additive manufacturing software in support of accurate quote estimates. Actively manage incoming leads and follow-up, maintain digital distribution list. Manage Additive Salesforce relationships, leads, and opportunities. Maintain database of new contacts, accounts and opportunities. Create dashboards and issue periodic reports. Assist in market research and outreach: identifying promising markets and engaging the customer base in those markets, develop sales tools content. Assist Marketing with trade show planning, setup and participation as required, as well as content for brochures, articles, social media, etc. Possess a strong understanding of our value proposition, product offering, our competition in the industry, and positioning. Follow the latest industry developments and stay up to date on competitors. Assumes additional duties as needed or directed in support of the Company's 2025/2030 Strategies. Requirements U.S. citizen. Bachelor's degree required, Engineering preferred. 3+ years proven track record in engineering sales or related market. Previous experience in welding, additive manufacturing or related fields preferred. Demonstrated communication skills - verbal and written. Computer literate with working knowledge of MS Office (i.e. Word, Excel, PowerPoint) and CAD (e.g. Solidworks, Autodesk, etc). Familiarity with CRM tools is a plus Technical skills required to understand and propose products or solutions by focusing on client requirements, including well-versed in welding metallurgy, mechanics of materials, and material/process technical specifications. Ability to communicate information, whether technical or non-technical to staff members and customers, in a clear and concise manner. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27825 Job Responsibilities Position Summary: Assist Electrical Project Engineers and Designers in completing their assigned tasks. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Focus on design and development. Position responsibilities: • Component and/or schematic drawing creation. • Assist in creating and assembling Service Manuals. • Revising and updating of drawings. • Provide technical assistance to Estimating, Sales, Production and Service as required. • Provide assistance to other departments (Service, Shop, etc.) as required. • Work well with Machine Builders/Electricians, Management, and support functions. Job Requirements Essential skills and experience: • High School Degree or GED or attending skills trade school. • Pursuing a Technical or Bachelor Degree • Commitment to company values • Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential skills and experience: • Safety (OSHA STDS) Environmental, Health & Safety (EH&S) • Understand the Company's EHS Policy and how it relates to this job. • Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Work in a safe and environmentally friendly manner and observe all company EHS procedures. • Know that the company EHS procedures are located on the ISO drive. • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. • Attend required EHS training Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

National Power is seeking a detail-oriented and experienced Estimator/Project Manager to lead cost estimation and project execution for critical infrastructure initiatives. This role combines technical expertise with strategic project oversight, ensuring accurate forecasting, efficient resource management, and successful delivery of DC power and infrastructure projects. Key Responsibilities: Estimation Duties: Analyze blueprints, technical documents, and proposals to prepare accurate cost estimates Collaborate with engineers, architects, vendors, and clients to gather project details Calculate labor, material, equipment, and subcontractor costs Prepare and submit bid proposals and financial estimates Assess financial and operational risks and adjust estimates as needed Maintain historical cost data and update estimating tools Project Management Duties: Develop and execute detailed project work plans; revise as needed to meet evolving requirements Coordinate procurement, staffing, and scheduling to ensure timely project delivery Monitor project progress, budget adherence, and compliance with safety and quality standards Communicate regularly with clients, subcontractors, vendors, and internal teams Conduct site walks, oversee installations, and provide technical support Track materials, contractor schedules, and job progress Prepare and deliver weekly/monthly progress reports and digital documentation Ensure timely completion of project close-out documentation and performance scorecards Qualifications: Bachelor's degree in Engineering, Construction Management, or related field preferred Minimum 5 years of experience in project management and estimating within critical infrastructure or telecom/power sectors Familiarity with DC power systems (-48VDC, +24VDC), UPS, HVAC, fire suppression, and battery systems Knowledge of GR-1275 installation standards and general construction practices PMP certification or equivalent preferred Proficiency in Microsoft Office Suite; Visio and AutoCAD experience a plus Strong communication, organizational, and problem-solving skills Physical Requirements: Ability to lift and carry up to 50 pounds Capable of standing, walking, bending, and climbing ladders for extended periods Comfortable working in various environments, including construction sites, rooftops, and confined spaces Must be able to wear personal protective equipment (PPE) as required Ability to work in varying weather conditions, including heat, cold, and inclement weather Must have visual acuity to read blueprints, schematics, and technical documents Travel Requirements: Must be willing and able to travel up to 50-75%, including overnight stays, depending on project location and scope Travel may include site visits, client meetings, and on-site project management across regional and national locations Benefits: Medical, dental, vision, life and disability insurance 401(k) retirement savings plan Paid time off and paid holidays Career advancement opportunities Additional Info: Criminal background check, pre-employment drug screen and MVR required National Power, LLC is an Equal Opportunity/Affirmative Action Employer and VEVRAA federal contractor and affords equal opportunity to all applicants for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status, gender identification or any other status protected under local, state or federal laws.