Project Engineer jobs at Navistar

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary As the Staff Mechanical Design Engineer, Electronics, you will have a critical technical role guiding and shaping the design, release, and integration of electrical and mechanical components. Specifically, integrating electrical components, PCBA, sensors, and connectors into a mechanical environment of housings, shafts, and bearings. You will work with purchasing to source components and work collaboratively with suppliers to ensure manufacturability at scale. You will develop DFMEAs and DVPRs to ensure robust analytical and physical validation. Responsibilities Lead sensor development of absolute magnetic position sensors and inductive relative position sensors in an actuator Work cross functionally with Electrical Engineering on sensor selection, inductive coil design, target selection, and magnet selection Lead sensor performance characterization for temperature, deflection, tolerance stack ups, current, voltage, etc. Develop detailed CAD drawings and manufacturing instructions Release CAD and drawings of sensor components, including targets, magnets, plastic gears, and other parts Write electromagnetic performance analysis requests Complete tolerance stack ups Complete first principals mechanical and electrical engineering calculations to support designs Write FEA analysis requests for structural FEA Execute and document Analysis Design Verification Plans & Reports (ADVP&R) of sensors and related components Develop and maintain Design Failure Mode and Effects Analyses (DFMEAs) of sensors and related components Coordinate validation and quality assurance activities with contract manufacturer, Tier 1. and Tier 2 suppliers Collaborate across disciplines to advance designs from initial concept through prototyping to mass production. Support hands-on prototype assembly, testing, and component fabrication Qualifications Proficient in CAD tools (CATIA/3DExperience preferred) and PLM systems for component design, including BOM structuring and engineering change control. Strong mechanical engineering foundation, with expertise in materials for sensors Experienced in high-volume manufacturing techniques for sensors, including overmolding Deep understanding of sensor design parameters Proficient in GD&T and tolerance stack-up analysis to ensure reliability Hands-on experience with integration, assembly, testing, and troubleshooting of sensors Pay Disclosure Salary Range for California Based Candidates: $137,800.00 - $172,200.00 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Proficient in CAD tools (CATIA/3DExperience preferred) and PLM systems for component design, including BOM structuring and engineering change control. Strong mechanical engineering foundation, with expertise in materials for sensors Experienced in high-volume manufacturing techniques for sensors, including overmolding Deep understanding of sensor design parameters Proficient in GD&T and tolerance stack-up analysis to ensure reliability Hands-on experience with integration, assembly, testing, and troubleshooting of sensors Lead sensor development of absolute magnetic position sensors and inductive relative position sensors in an actuator Work cross functionally with Electrical Engineering on sensor selection, inductive coil design, target selection, and magnet selection Lead sensor performance characterization for temperature, deflection, tolerance stack ups, current, voltage, etc. Develop detailed CAD drawings and manufacturing instructions Release CAD and drawings of sensor components, including targets, magnets, plastic gears, and other parts Write electromagnetic performance analysis requests Complete tolerance stack ups Complete first principals mechanical and electrical engineering calculations to support designs Write FEA analysis requests for structural FEA Execute and document Analysis Design Verification Plans & Reports (ADVP&R) of sensors and related components Develop and maintain Design Failure Mode and Effects Analyses (DFMEAs) of sensors and related components Coordinate validation and quality assurance activities with contract manufacturer, Tier 1. and Tier 2 suppliers Collaborate across disciplines to advance designs from initial concept through prototyping to mass production. Support hands-on prototype assembly, testing, and component fabrication

Since 2018, Elevate Aircraft Seating has been enhancing the passenger experience through innovative aircraft seat design and manufacturing. With locations in California, Washington, and Germany we are guided by creativity, collaboration, and a shared commitment to quality. We are looking for a skilled Project Engineer to join our team in Santa Maria, CA. This is an on-site position based in Santa Maria, CA. We value teamwork, inclusivity, and continuous professional development, and we offer competitive benefits along with opportunities for growth. JOB SUMMARY The Project Engineer is responsible for engineering and scheduling for the program which includes drawing list and certification of deliverables. The Project Engineer will coordinate and ensure the completion of projects, identify and resolve issues, and oversee the work of the Design Engineers to ensure work is in line with customer and regulatory requirements. They will also ensure all project elements comply with timelines, budget, and regulations. Note: The primary difference between job levels tie to skill level, complexity of the problem solving, and year of experience. Job assignments will be based on experience, job opening and budget availability, and the performance level of the incumbent. SUMMARY OF JOB DUTIES - Essential Functions (Other duties and projects may be assigned or requested.) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Take ownership of assigned projects to ensure completion on time, on budget, and in compliance with regulations. Provide technical input to program management related to engineering components of the project for the creation of the project schedule; identify project elements and phases, sequence elements, and time estimates. For example, check program schedule to ensure integration with concurrent projects and validates resource availability (manpower, software, materials, systems, etc.). Perform technical analysis, reviews specifications, and product design to develop a cost and time estimate. Monitor project progress and recommend schedule changes based on re-prioritization, materials availability, and as customer needs change. Assess impact of customer changes, time, cost, materials, and processes. Identify necessary tests that must be conducted during the engineering process. Monitor to ensure the completion of tests such as functionality, durability, and safety. Provide regular verbal or written updates based on KPIs and project status. Analyze data and recommend corrective action as needed. Monitor the work of Design Engineers for accuracy and technical competence; provide feedback as needed. Develop and maintain standard list of notes for use on 2D engineering drawings. May work with management and sales teams to review project proposals; identify and address potential issues as needed. Maintain a safe, secure and legal work environment, adhering to all Company policies and procedures. Contribute to team effort by accomplishing related results as needed. Maintain and protect the confidentiality of the Company s information and products. Perform other duties and projects as assigned or requested. GENERAL QUALIFICATIONS Education, Knowledge, and Experience Education: A Bachelor s Degree in Mechanical Engineering or similar discipline is required. Experience: Job assignments will be based on experience, job opening and budget availability, and the performance level of the incumbent. Level l: 0-2 years of engineering experience Level II: 2-5 years of engineering experience Level III: 5+ years of experience Skills: Ability to handle multiple tasks simultaneously Ability to lead a team comprised of multiple disciplines Excellent oral and written communication skills Expert level of experience with CATIA V5 Ability to communicate and present to a variety of stakeholders (e.g., customers, OEM) Proficiency with MS Office applications Preferred Skills/Experience: MS Project PLM system knowledge AutoCAD familiarity Other: May be asked to work extended or irregular hours as required. Must show proof of ability to work in the United States. Elevate Aircraft Seating is an at-will employer; employment is at the mutual consent of both the employee and the employer, and may be terminated at will for any reason, with or without cause, at any time during employment with the Company. As business conditions warrant a change in the operating necessities of the Company, all employees are expected to react productively, handle other essential tasks assigned now or in the future. SUPERVISION PROVIDED TO THE POSITION Level I: Direction with necessary guidance is provided in terms of tasks and objectives and measured based upon how well objectives have been met. Receives detailed instructions as needed. Level II: Direction is provided in terms of tasks and objectives. Work is reviewed upon completion on how well objectives have been met. Will autonomously work on routine programs / tasks with frequent status updates to supervisor. Will be provided with additional guidance on more complex or non-routine tasks. Level III: Direction is provided in terms of tasks and objectives. Work is reviewed upon completion on how well objectives have been met. Will work autonomously with only occasional status updates with supervisor. LEADERSHIP RESPONSIBILITY Oversees the work of others. Assists in the training and coaching of project team members as assigned. Assist in driving the achievement of key initiatives of the project. COMPENSATION & BENEFITS Elevate Aircraft Seating offers competitive wages and benefits to recognize employees for their work. The base pay offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Salary Range Transparency: $90,000 - $130,000 annually Featured Benefits: Up to 7% bonus potential (for bonus eligible positions) Generous 401(K) matching with immediate eligibility and vesting 3 weeks of Paid Time Off 12 paid holidays Affordable health care plans for yourself and your family And so much more! Other Perks: Potential for growth within organization Supportive workplace environment with a team-oriented culture

Job DescriptionDescriptionGonzalez Companies is a partner managed firm that provides comprehensive Planning, Design, and Construction Management Services to large and small Water, Sewer and Utility Districts; Departments of Transportation; and municipalities. We are currently seeking a Transportation Engineer (III/IV) to help serve our connection of clients and community. If you're hungry for knowledge, ready to make a difference and dedicated to providing personalized attention to our clients, we want you on our team. The projected range of compensation in Illinois for this job is $80,000 - $95,000. Your Primary Responsibilities will include Lead or contribute significantly to the design and delivery of transportation projects, including roadway geometrics, intersections, pedestrian facilities, drainage, and traffic control. Develop and review engineering plans, models, and calculations using MicroStation/OpenRoads and/or AutoCAD Civil 3D. Prepare design reports, cost estimates, technical memos, specifications, and milestone submittals for DOT, LPA, or municipal agencies. Oversee and guide junior engineers, providing mentorship, task coordination, and quality review of design documents. Coordinate with project managers, clients, subconsultants, utilities, and permitting agencies to ensure project requirements and schedules are met. Perform advanced engineering analyses, troubleshoot design challenges, and propose effective technical solutions. Support or lead project planning, scope development, and discipline-level budgeting as experience allows. Participate in QA/QC reviews and ensure compliance with relevant DOT, municipal, and industry standards. Conduct occasional field investigations, site reviews, or construction support activities. What you'll need Bachelor's degree in Civil Engineering or related discipline; Master's preferred for higher-level roles. Typically 5-12+ years of experience in transportation or roadway engineering with demonstrated technical competency. Proficiency with MicroStation/OpenRoads and/or AutoCAD Civil 3D, including advanced geometric design and plan development. Strong understanding of DOT, LPA, or municipal design standards, processes, and submittal requirements. Ability to produce, review, and refine engineering calculations, design packages, cost estimates, and technical documents. PE license required; ability to serve as Engineer of Record or lead discipline tasks at the IV level. Proven ability to mentor junior staff, coordinate tasks, manage portions of projects, and communicate effectively with clients and internal teams. Strong analytical, problem-solving, and decision-making skills with the ability to work independently on complex assignments. Gonzalez Offers Competitive Benefits including: Competitive salary Major medical, dental and vision insurance Flexible Spending Account Health Savings Account 401K Bonus program Paid holidays and generous paid time off Professional development A team of creative and talented individuals to work alongside Gonzalez is a rapidly growing, dynamic, professional services firm specializing in civil engineering, construction management, and construction inspection. Our clientele includes large and small water, sewer, and utility districts; departments of transportation and other public transportation agencies; and municipalities throughout the Midwest. Working primarily in the Greater St. Louis, Chicago, and Louisville metro areas, Gonzalez offers a great work environment, generous benefit packages, and opportunities to succeed in many professional disciplines. Equal Opportunity Employer Gonzalez Companies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescriptionGonzalez Companies is a partner managed firm that provides comprehensive Planning, Design, and Construction Management Services to large and small Water, Sewer and Utility Districts; Departments of Transportation; and municipalities. We are currently seeking a Project Engineer to help serve our connection of clients and community. If you're hungry for knowledge, ready to make a difference and dedicated to providing personalized attention to our clients, we want you on our team. Your Primary Responsibilities will include Preparation of reports, construction plans, and technical specifications for projects Working under supervision of a project manager or senior-level team member and assist with tasks including preparing engineering related calculations, drawings, and visual aids Perform site visits and field observations before and during construction Able to conduct field work, tolerate variable environmental conditions, walk on uneven surfaces, and lift and carry at least 50 pounds, when needed Following corporate quality procedures Collaborating with design teams consisting of multidiscipline design engineers, technicians and planners Ensure that projects comply with local regulations and safety standards Maintain proper documentation of projects, including design changes, reports, and test results Stay updated on industry standards, building codes, and software advancements Take initiative to learn new skills or technologies that improve project efficiency or design What you'll need Bachelor's Degree in Civil Engineering from an accredited university Experience with AutoCAD, Civil3D and Microstation 1+ years of experience providing engineering design for storm water. wastewater, transportation, and or site development engineering projects Excellent organizational and time management skills Ability to work effectively in a team environment Course work in water resources, transportation, or relevant coursework EIT OR PE preferred Gonzalez Offers Competitive Benefits including: Competitive salary Major medical, dental and vision insurance Flexible Spending Account Health Savings Account 401K Bonus program Paid holidays and generous paid time off Professional development A team of creative and talented individuals to work alongside Gonzalez is a rapidly growing, dynamic, professional services firm specializing in civil engineering, construction management, and construction inspection. Our clientele includes large and small water, sewer, and utility districts; departments of transportation and other public transportation agencies; and municipalities throughout the Midwest. Working primarily in the Greater St. Louis, Chicago, and Louisville metro areas, Gonzalez offers a great work environment, generous benefit packages, and opportunities to succeed in many professional disciplines. Equal Opportunity Employer Gonzalez Companies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescriptionGonzalez Companies is a partner managed firm that provides comprehensive Planning, Design, and Construction Management Services to large and small Water, Sewer and Utility Districts; Departments of Transportation; and municipalities. We are currently seeking a Project Engineer (I/II) - Site/Civil to help serve our connection of clients and community. If you're hungry for knowledge, ready to make a difference and dedicated to providing personalized attention to our clients, we want you on our team. The projected range of compensation in Illinois for this job is $70,000 - $80,000. Your Primary Responsibilities will include Assist in planning, designing, and executing civil/site projects for municipal, commercial, and industrial clients. Prepare detailed construction drawings, specifications, and technical documentation using AutoCAD Civil 3D or similar software. Perform grading, drainage, utility, and earthwork calculations, ensuring compliance with codes and standards. Conduct site visits and inspections to evaluate field conditions and verify construction aligns with design intent. Support project management efforts by tracking schedules, budgets, and project deliverables. Collaborate effectively with clients, contractors, and internal teams to identify solutions to design or construction challenges. What you'll need Bachelor's degree in Civil Engineering or a related field. Engineer-in-Training (EIT) certification required; PE licensure preferred for Level II. 0-3 years of experience for Level I; 3-6 years for Level II in civil/site engineering projects. Proficiency in AutoCAD Civil 3D or similar CAD software. Knowledge of grading, stormwater management, utility design, and construction standards. Strong written and verbal communication, problem-solving, and teamwork skills. Ability to perform site visits and travel to project locations as needed. Gonzalez Offers Competitive Benefits including: Competitive salary Major medical, dental and vision insurance Flexible Spending Account Health Savings Account 401K Bonus program Paid holidays and generous paid time off Professional development A team of creative and talented individuals to work alongside Gonzalez is a rapidly growing, dynamic, professional services firm specializing in civil engineering, construction management, and construction inspection. Our clientele includes large and small water, sewer, and utility districts; departments of transportation and other public transportation agencies; and municipalities throughout the Midwest. Working primarily in the Greater St. Louis, Chicago, and Louisville metro areas, Gonzalez offers a great work environment, generous benefit packages, and opportunities to succeed in many professional disciplines. Equal Opportunity Employer Gonzalez Companies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescriptionGonzalez Companies is a partner managed firm that provides comprehensive Planning, Design, and Construction Management Services to large and small Water, Sewer and Utility Districts; Departments of Transportation; and municipalities. We are currently seeking a Transportation Engineer (I/II) to help serve our connection of clients and community. If you're hungry for knowledge, ready to make a difference and dedicated to providing personalized attention to our clients, we want you on our team. The projected range of compensation in Illinois for this job is $70,000 - $80,000. Your Primary Responsibilities will include Assist in the design and development of transportation projects including roadways, intersections, pedestrian facilities, and traffic improvements. Prepare engineering drawings, plans, and 3D models using CAD software (e.g., MicroStation, OpenRoads, AutoCAD Civil 3D). Perform basic to intermediate engineering calculations, including horizontal/vertical alignments, grading, drainage, quantities, and traffic control layouts. Support preparation of project documents such as cost estimates, technical reports, design summaries, and bid packages. Conduct field visits to support data collection, condition assessments, surveying coordination, or construction observations. Collaborate with senior engineers, project managers, and multidisciplinary teams to develop design solutions and ensure project quality. Assist with preparation of ODOT, DOT, LPA, or municipal submittals and ensure adherence to applicable design standards and guidelines. Review and interpret topographic surveys, geotechnical reports, environmental documents, and utility data. Participate in coordination with clients, utility companies, and permitting agencies as needed. Contribute to internal QA/QC processes, documentation, and design reviews. What you'll need Bachelor's degree in Civil Engineering or related field. 0-5 years of experience in transportation, roadway, or municipal infrastructure design. Experience or familiarity with MicroStation/OpenRoads and/or AutoCAD Civil 3D. Understanding of geometric design principles, drainage, traffic control, and plan development. Ability to prepare or assist with design calculations, drawings, cost estimates, and technical documentation. EIT/FE preferred; required for Engineer II level. PE-track candidates strongly preferred at higher level. Strong communication, collaboration, and problem-solving skills, with ability to work independently as experience grows. Familiarity with DOT, LPA, or municipal design standards is a plus. Gonzalez Offers Competitive Benefits including: Competitive salary Major medical, dental and vision insurance Flexible Spending Account Health Savings Account 401K Bonus program Paid holidays and generous paid time off Professional development A team of creative and talented individuals to work alongside Gonzalez is a rapidly growing, dynamic, professional services firm specializing in civil engineering, construction management, and construction inspection. Our clientele includes large and small water, sewer, and utility districts; departments of transportation and other public transportation agencies; and municipalities throughout the Midwest. Working primarily in the Greater St. Louis, Chicago, and Louisville metro areas, Gonzalez offers a great work environment, generous benefit packages, and opportunities to succeed in many professional disciplines. Equal Opportunity Employer Gonzalez Companies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary The Electrical Distribution System Integration Engineer will be responsible and accountable for ensuring the electrical wiring system is prepared for release to support mass production in accordance with Rivian's engineering best design practice. Taking into consideration: DFM/DFA, and APQP/PPAP supplier quality standards. The Electrical Distribution Systems Engineer will act as a technical lead for their Vehicle Platform Harness Architecture and ensure that supporting Design Release Engineers (DREs) and Application Engineers have completed all of their necessary design deliverables for pre-production, production, and post-production changes. Responsibilities Define vehicle topologies for device connections, specialty cables, grounding, 12V high-current, 48V DC Architecture, 120/230V AC, and integrate with vehicle communication protocols (e.g. CAN, LIN, Ethernet, etc.) Collaborate with hardware/software vehicle architects to develop vehicle integration strategies for the physical implementation of the harnessing, supporting, and leading logical and physical diagram reviews Derive and maintain information from device transmittals (DT / ICDs), JAMA requirements, Vehicle Architecture, and collaboration with Rivian Design Release Engineers (DRE(s)), and output sub-system Logical schematics Develop complexity matrices for all harness families, defining all region and circuit level variants, trims, and options Define and review connector/terminal selection and cavity layout with Rivian DRE(s) and Librarians Ensure the design supports all cross-functional teams' design intent, including properly specifying wire size and type for ampacity, voltage drop, cost, etc. Support Vehicle and Tier I Assembly lines for design implementation, issue tracking, and closure Support TPMs in creating timing plans, as well as coordinating changes to ensure design alignment within the Electrical Distribution Organization (2D/3D/Systems) Qualifications Bachelor of Science in Electrical Engineering, or related engineering disciplines; Master's preferred Minimum 3 years' experience developing wire harness technology or electrical wiring systems Experience in Capital Harness Suite is a bonus Experience with Program Management tools, such as: Jira, Jama, Smartsheet, and Confluence a bonus Experience working with specialty cables is a bonus Knowledge of DFMEA principles and execution is a bonus Willingness to develop new technologies for future programs Fluent in English (speaking, reading, writing, and listening) Self-driven, displaying initiative with minimal supervision Patience, kindness, and self-control, confidently centered around a positive mental attitude Proficient in Microsoft Office Word, Excel, Visio, and PowerPoint Pay Disclosure Salary Range California-Based Applicants: $121,500 - $151,900 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental, and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is adequate on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Bachelor of Science in Electrical Engineering, or related engineering disciplines; Master's preferred Minimum 3 years' experience developing wire harness technology or electrical wiring systems Experience in Capital Harness Suite is a bonus Experience with Program Management tools, such as: Jira, Jama, Smartsheet, and Confluence a bonus Experience working with specialty cables is a bonus Knowledge of DFMEA principles and execution is a bonus Willingness to develop new technologies for future programs Fluent in English (speaking, reading, writing, and listening) Self-driven, displaying initiative with minimal supervision Patience, kindness, and self-control, confidently centered around a positive mental attitude Proficient in Microsoft Office Word, Excel, Visio, and PowerPoint Define vehicle topologies for device connections, specialty cables, grounding, 12V high-current, 48V DC Architecture, 120/230V AC, and integrate with vehicle communication protocols (e.g. CAN, LIN, Ethernet, etc.) Collaborate with hardware/software vehicle architects to develop vehicle integration strategies for the physical implementation of the harnessing, supporting, and leading logical and physical diagram reviews Derive and maintain information from device transmittals (DT / ICDs), JAMA requirements, Vehicle Architecture, and collaboration with Rivian Design Release Engineers (DRE(s)), and output sub-system Logical schematics Develop complexity matrices for all harness families, defining all region and circuit level variants, trims, and options Define and review connector/terminal selection and cavity layout with Rivian DRE(s) and Librarians Ensure the design supports all cross-functional teams' design intent, including properly specifying wire size and type for ampacity, voltage drop, cost, etc. Support Vehicle and Tier I Assembly lines for design implementation, issue tracking, and closure Support TPMs in creating timing plans, as well as coordinating changes to ensure design alignment within the Electrical Distribution Organization (2D/3D/Systems)

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Responsibilities ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways. Qualifications Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems Pay Disclosure Salary Range SoCal-Based Applicants: $96,700-$120,900 (actual compensation will be determined based on experience, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways.

About SF MOTORS, INC. (dba SERES) SF Motors is building the next generation of intelligent robotic systems that combine advanced mobility, autonomy, and human-like adaptability. Our mission is to revolutionize how machines move, perceive, and interact in complex environments by integrating control engineering, artificial intelligence, and machine learning at every level of design. Job Title: Senior Robotic Engineer Location: Milpitas, CA Employment Type: Full-Time Position Summary The Senior Robotics Engineer will lead the design, development, and implementation of advanced locomotion, navigation, control, and machine learning systems for next-generation robotic platforms. This role requires deep technical expertise in robotic motion control, dynamic stability, and applied machine learning for perception and control optimization. The successful candidate will take ownership of complex robotic systems from concept to deployment, combining classical control theory with data-driven methods to enable adaptive, efficient, and intelligent mobility in real-world environments. Key Responsibilities Lead the design and development of robotic systems focused on lower-body locomotion, including bipedal walking, balance control, and terrain adaptation. Architect and implement advanced control and motion planning algorithms leveraging both model-based and machine learning-based approaches. Develop and integrate navigation systems using sensor fusion, SLAM, and path planning for autonomous mobility. Apply machine learning algorithms-including reinforcement learning, imitation learning, or supervised learning-for motion optimization, adaptive control, and perception-driven decision-making. Conduct simulation, modeling, and real-world validation of locomotion and control systems under dynamic conditions. Collaborate with mechanical, electrical, and software teams to ensure seamless integration and system performance. Mentor junior engineers and contribute to cross-functional design reviews and project leadership. Maintain detailed documentation of designs, experiments, and results. Stay current with advancements in robotics, control theory, and machine learning, and drive continuous innovation. Minimum Qualifications Master's or Ph.D. degree in Robotics, Mechanical Engineering, Electrical Engineering, Computer Science, or a related discipline. 5+ years of hands-on experience in robotic locomotion, control systems, or humanoid robotics (academic or industry). Proven experience applying machine learning algorithms (reinforcement learning, neural networks, or adaptive control) to robotics or control applications. Strong foundation in control theory, kinematics, dynamics, and trajectory optimization. Proficiency in programming languages such as C++, Python, and MATLAB/Simulink. Experience developing and tuning real-time control systems for actuated robotic mechanisms. Expertise with ROS/ROS2 and simulation tools such as Gazebo, MuJoCo, or Isaac Sim. Experience integrating sensors such as IMUs, vision systems, and force/torque sensors. Excellent analytical, problem-solving, and communication skills. Proven ability to manage complex technical projects and work effectively in cross-functional environments. Preferred Qualifications Advanced experience applying reinforcement learning and model predictive control (MPC) for motion control and planning. Background in mechanical, biomechanics, prosthetics, or exoskeleton design. Prior work on humanoid or legged robotic systems in R&D or product environments. Track record of publications, patents, or open-source contributions in robotics or control. Experience leading specific engineering teams or mentoring in a research or product development context. Working Conditions Position based in Milpitas, CA, with occasional travel to partner sites or testing facilities as required. Work is primarily conducted in a laboratory and office environment, involving both simulation and physical prototyping. Why Join Us High ownership & impact: Play a key role in a small, fast-moving team where your work directly shapes the product. Full-stack robotics exposure: Work across system, software, and AI - not limited to a narrow role. Collaborative culture: Join an open, innovative environment that values ideas and initiative. Rapid growth: Accelerate your learning curve with opportunities for professional and personal development. Future-focused: Help shape the next generation of real-world robotics applications. Competitive benefits: Attractive package including Medical, Dental, Vision, 401K match, free lunch and more. Candidates must be legally authorized to work in the United States and verification of employment authorization will be required at the time of hire. SERES is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Automation Controls Engineer will support the development of flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate has a track record of successfully architecting and deploying advanced automated systems in a quick changing, start-up environment. This role will take a hands-on execution approach and use their hardware and software skills to create bleeding-edge industrial automation systems, support production operations, and democratize factory data to support key business decisions. Divergent is pushing the boundaries of technology and we need a passionate and agile engineer to help us create the platform for sustainable manufacturing. The Role Develop PLC, HMI & SCADA software & controls architectures for the next generation of DAPS factories & factory modules. Contribute to automation standards, frameworks, best practices, and platform selection. Architect new advanced automation systems, ultimately leading to detailed design, development, and commissioning of first article factory modules. Develop controls systems for new and experimental processes in an R&D environment. Understand and steer production operations requirements for factory modules leading to increased overall factory OPE through better development of modules and factory data. Work closely with cross-functional technical teams to ensure that program deliverables and milestones are defined, scheduled, and executed on time and budget. Support engineering teams in achieving resolution of any gridlock, rather than merely report status. Must have the leadership ability and intelligence to drive hands-on execution of a highly motivated and intelligent team under intense time constraints. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls. 5 years of industrial automation controls experience in dynamic environments. IEC 61131-3 Structured Text programming experience. Preferred Qualifications Strong knowledge of NEC, NFPA 79, UL508A standards. Experience designing electrical control panels using EPlan or AutoCAD Advanced experience working with the Beckhoff TwinCAT & hardware ecosystem. Advanced experience with industrial automation hardware, fieldbus interfaces and motion control. Advanced industrial networking experience Experience with industrial safety systems, risk assessments and safety over fieldbus protocols, i.e. FSoE & PROFIsafe Experience developing SCADA & other factory data management platforms, industrial databases, dashboards, etc.. Experience with Industrial robot platforms, offline program, and virtual commissioning. Experience with industrial electrical schematic tools, such as EPlan or AutoCAD electrical. Experience with standard software engineering practices, object-oriented programming, SOLID, unit testing and development tools such as GIT. Technical leadership experience in defining standards, methods, processes, and training. Work Environment Office and factory environment 100% onsite Minimal travel Work near moving mechanical parts Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E04 - E05 as evaluated through our interview process. Engineer / E04: $106,000 - $145,750 Senior / E05: $122,400 - $168,300 Pay Range$106,000-$168,300 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Controls Systems Engineer Department: Engineering / Maintenance Reports To: Engineering Manager Toyoda Gosei, a Tier One supplier to Toyota, is seeking a highly skilled Controls Systems Engineer to support and enhance our manufacturing operations. This role is responsible for designing, implementing, and maintaining automated control systems to optimize production efficiency, improve safety, and ensure high-quality manufacturing processes. Key Responsibilities: Design, develop, and maintain PLC (Programmable Logic Controller) programs for automated manufacturing systems. Integrate and troubleshoot Human-Machine Interface (HMI) systems to improve operator usability and efficiency. Perform electrical control system troubleshooting, diagnostics, and repairs to minimize downtime. Collaborate with cross-functional teams, including maintenance, production, and quality, to enhance system performance. Ensure compliance with Toyota Production System (TPS) principles and industry safety standards. Maintain and update electrical schematics, wiring diagrams, and documentation. Assist in the installation and commissioning of new automation equipment. Lead or support continuous improvement initiatives focused on automation and controls. Train maintenance and production teams on PLC/HMI systems for troubleshooting and basic operation. Qualifications & Experience: Bachelor s degree in Electrical Engineering, Controls Engineering, or a related field. Minimum 3-5 years of experience in an automated manufacturing environment. Proficiency in PLC programming (Allen-Bradley, Siemens, Mitsubishi, or similar). Experience with HMI development and integration (FactoryTalk, Wonderware, etc.). Strong understanding of industrial electrical systems, sensors, and motor controls. Familiarity with robotics, vision systems, and SCADA applications is a plus. Ability to troubleshoot and debug control systems in real-time under production conditions. Knowledge of Toyota Production System (TPS) or Lean Manufacturing principles preferred. Excellent problem-solving, analytical, and communication skills. Equal Employment Opportunity Statement Toyoda Gosei is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. All employment decisions are based on qualifications, merit, and business needs.

Job Description Key Responsibilities: Design, develop, and maintain PLC (Programmable Logic Controller) programs for automated manufacturing systems. Integrate and troubleshoot Human-Machine Interface (HMI) systems to improve operator usability and efficiency. Perform electrical control system troubleshooting, diagnostics, and repairs to minimize downtime. Collaborate with cross-functional teams, including maintenance, production, and quality, to enhance system performance. Ensure compliance with Toyota Production System (TPS) principles and industry safety standards. Maintain and update electrical schematics, wiring diagrams, and documentation. Assist in the installation and commissioning of new automation equipment. Lead or support continuous improvement initiatives focused on automation and controls. Train maintenance and production teams on PLC/HMI systems for troubleshooting and basic operation. Equal Employment Opportunity Statement Toyoda Gosei is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. All employment decisions are based on qualifications, merit, and business needs.

Controls Systems Engineer Department: Engineering / Maintenance Reports To: Engineering Manager Toyoda Gosei, a Tier One supplier to Toyota, is seeking a highly skilled Controls Systems Engineer to support and enhance our manufacturing operations. This role is responsible for designing, implementing, and maintaining automated control systems to optimize production efficiency, improve safety, and ensure high-quality manufacturing processes. Key Responsibilities: * Design, develop, and maintain PLC (Programmable Logic Controller) programs for automated manufacturing systems. * Integrate and troubleshoot Human-Machine Interface (HMI) systems to improve operator usability and efficiency. * Perform electrical control system troubleshooting, diagnostics, and repairs to minimize downtime. * Collaborate with cross-functional teams, including maintenance, production, and quality, to enhance system performance. * Ensure compliance with Toyota Production System (TPS) principles and industry safety standards. * Maintain and update electrical schematics, wiring diagrams, and documentation. * Assist in the installation and commissioning of new automation equipment. * Lead or support continuous improvement initiatives focused on automation and controls. * Train maintenance and production teams on PLC/HMI systems for troubleshooting and basic operation. Qualifications & Experience: * Bachelors degree in Electrical Engineering, Controls Engineering, or a related field. * Minimum 3-5 years of experience in an automated manufacturing environment. * Proficiency in PLC programming (Allen-Bradley, Siemens, Mitsubishi, or similar). * Experience with HMI development and integration (FactoryTalk, Wonderware, etc.). * Strong understanding of industrial electrical systems, sensors, and motor controls. * Familiarity with robotics, vision systems, and SCADA applications is a plus. * Ability to troubleshoot and debug control systems in real-time under production conditions. * Knowledge of Toyota Production System (TPS) or Lean Manufacturing principles preferred. * Excellent problem-solving, analytical, and communication skills. Equal Employment Opportunity Statement Toyoda Gosei is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. All employment decisions are based on qualifications, merit, and business needs.

Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Automation Controls Engineer will support the development of flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate has a track record of successfully architecting and deploying advanced automated systems in a quick changing, start-up environment. This role will take a hands-on execution approach and use their hardware and software skills to create bleeding-edge industrial automation systems, support production operations, and democratize factory data to support key business decisions. Divergent is pushing the boundaries of technology and we need a passionate and agile engineer to help us create the platform for sustainable manufacturing. The Role Develop PLC, HMI & SCADA software & controls architectures for the next generation of DAPS factories & factory modules. Contribute to automation standards, frameworks, best practices, and platform selection. Architect new advanced automation systems, ultimately leading to detailed design, development, and commissioning of first article factory modules. Develop controls systems for new and experimental processes in an R&D environment. Understand and steer production operations requirements for factory modules leading to increased overall factory OPE through better development of modules and factory data. Work closely with cross-functional technical teams to ensure that program deliverables and milestones are defined, scheduled, and executed on time and budget. Support engineering teams in achieving resolution of any gridlock, rather than merely report status. Must have the leadership ability and intelligence to drive hands-on execution of a highly motivated and intelligent team under intense time constraints. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls. 5 years of industrial automation controls experience in dynamic environments. IEC 61131-3 Structured Text programming experience. Preferred Qualifications Strong knowledge of NEC, NFPA 79, UL508A standards. Experience designing electrical control panels using EPlan or AutoCAD Advanced experience working with the Beckhoff TwinCAT & hardware ecosystem. Advanced experience with industrial automation hardware, fieldbus interfaces and motion control. Advanced industrial networking experience Experience with industrial safety systems, risk assessments and safety over fieldbus protocols, i.e. FSoE & PROFIsafe Experience developing SCADA & other factory data management platforms, industrial databases, dashboards, etc.. Experience with Industrial robot platforms, offline program, and virtual commissioning. Experience with industrial electrical schematic tools, such as EPlan or AutoCAD electrical. Experience with standard software engineering practices, object-oriented programming, SOLID, unit testing and development tools such as GIT. Technical leadership experience in defining standards, methods, processes, and training. Work Environment Office and factory environment 100% onsite Minimal travel Work near moving mechanical parts Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E04 - E05 as evaluated through our interview process. Engineer / E04: $106,000 - $145,750 Senior / E05: $122,400 - $168,300 Pay Range$106,000-$168,300 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Automation Controls Engineer will support the development of flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate has a track record of successfully architecting and deploying advanced automated systems in a quick changing, start-up environment. This role will take a hands-on execution approach and use their hardware and software skills to create bleeding-edge industrial automation systems, support production operations, and democratize factory data to support key business decisions. Divergent is pushing the boundaries of technology and we need a passionate and agile engineer to help us create the platform for sustainable manufacturing. The Role * Develop PLC, HMI & SCADA software & controls architectures for the next generation of DAPS factories & factory modules. * Contribute to automation standards, frameworks, best practices, and platform selection. * Architect new advanced automation systems, ultimately leading to detailed design, development, and commissioning of first article factory modules. * Develop controls systems for new and experimental processes in an R&D environment. * Understand and steer production operations requirements for factory modules leading to increased overall factory OPE through better development of modules and factory data. * Work closely with cross-functional technical teams to ensure that program deliverables and milestones are defined, scheduled, and executed on time and budget. * Support engineering teams in achieving resolution of any gridlock, rather than merely report status. Must have the leadership ability and intelligence to drive hands-on execution of a highly motivated and intelligent team under intense time constraints. Basic Qualifications * Ability to lawfully access information and technology that is subject to US export controls. * 5 years of industrial automation controls experience in dynamic environments. * IEC 61131-3 Structured Text programming experience. Preferred Qualifications * Strong knowledge of NEC, NFPA 79, UL508A standards. * Experience designing electrical control panels using EPlan or AutoCAD * Advanced experience working with the Beckhoff TwinCAT & hardware ecosystem. * Advanced experience with industrial automation hardware, fieldbus interfaces and motion control. * Advanced industrial networking experience * Experience with industrial safety systems, risk assessments and safety over fieldbus protocols, i.e. FSoE & PROFIsafe * Experience developing SCADA & other factory data management platforms, industrial databases, dashboards, etc.. * Experience with Industrial robot platforms, offline program, and virtual commissioning. * Experience with industrial electrical schematic tools, such as EPlan or AutoCAD electrical. * Experience with standard software engineering practices, object-oriented programming, SOLID, unit testing and development tools such as GIT. * Technical leadership experience in defining standards, methods, processes, and training. Work Environment * Office and factory environment * 100% onsite * Minimal travel * Work near moving mechanical parts Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E04 - E05 as evaluated through our interview process. * Engineer / E04: $106,000 - $145,750 * Senior / E05: $122,400 - $168,300 Pay Range $106,000-$168,300 USD What We Offer: * Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. * Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. * Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. * Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. * Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Join a thriving full-service commercial construction and construction management company that's shaping the future of Las Vegas. We handle projects across every phase of construction and provide our clients with innovative design-build, value engineering, and sustainable design solutions. If you're passionate about creating strong, efficient, and forward-thinking structures, we'd love to meet you. Why You'll Love This Role • Stable Monday-Friday schedule: 8:00 AM - 5:00 PM • No nights or weekends - enjoy true work-life balance • Opportunity to work on diverse, exciting commercial projects • Supportive team environment that welcomes collaboration, learning, and professional growth Compensation & Benefits • $55,000 - $120,000 (based on experience) • Full Benefit Package • Opportunities for mentorship and advancement What We're Looking For • Bachelor's Degree in Structural Engineering or Civil Engineering • PE or SE license a plus (not required) • Open to new graduates - bring your passion and fresh ideas! • Strong interest in commercial construction and innovative building solutions If you're ready to contribute to impactful projects and grow your career with a respected private company, apply today with your resume for more information.

Job Description Structural Engineer - Full-Time Join a thriving full-service commercial construction and construction management company that's shaping the future of Las Vegas. We handle projects across every phase of construction and provide our clients with innovative design-build, value engineering, and sustainable design solutions. If you're passionate about creating strong, efficient, and forward-thinking structures, we'd love to meet you. Why You'll Love This Role • Stable Monday-Friday schedule: 8:00 AM - 5:00 PM • No nights or weekends - enjoy true work-life balance • Opportunity to work on diverse, exciting commercial projects • Supportive team environment that welcomes collaboration, learning, and professional growth Compensation & Benefits • $55,000 - $120,000 (based on experience) • Full Benefit Package • Opportunities for mentorship and advancement What We're Looking For • Bachelor's Degree in Structural Engineering or Civil Engineering • PE or SE license a plus (not required) • Open to new graduates - bring your passion and fresh ideas! • Strong interest in commercial construction and innovative building solutions If you're ready to contribute to impactful projects and grow your career with a respected private company, apply today with your resume for more information. Job Posted by ApplicantPro

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Responsibilities ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways. Qualifications Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems Pay Disclosure Salary Range SoCal-Based Applicants: $96,700-$120,900 (actual compensation will be determined based on experience, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways.

Job Description Tri‐Tech Engineering, LP is a Houston, Texas based full service civil and structural engineering company providing services to production and custom home builders, commercial builders, developers, architects as well as individuals. We are currently seeking a Licensed, Structural Engineer for a position in our Houston, TX office. This position offers the opportunity for you to utilize your leadership skills and expand your career goals. If you are looking for a rewarding and enjoyable culture, come join our team. We know that our ability to provide the highest level of consistent, accurate and timely engineering, surveying, and planning services to our commercial customers and residential clients begins with our incredible employees. Because of this, we offer competitive salaries, a complete benefits package, and the opportunity for advancement within our steadily expanding company. Benefits, Incentives and Career Development: Medical, Dental and Vision (Employer contributes 95% of base medical, dental & vision plan for employee coverage) Company Paid Short-Term Disability, Long-Term Disability & Life Insurance 401K Program + Employer Match 9 Paid Holidays 3 Weeks PTO (prorated 1st year) Annual Bonus Opportunity Monthly Employee Appreciation Events 9-80 Work Schedule Option Reimbursement of Professional Organization Membership Fees Reimbursement of Continuing Education Principal Duties and Responsibilities: Provide design for structural components necessary for the development of a project. Perform structural wood and steel calculations for commercial and residential projects. Perform reinforced concrete calculations for building slabs, spread footings, retaining walls etc. Structural engineer shall have ability of understanding, interpreting and correctly applying national codes and standards such as IRC, IBC, ASCE-7, ACI, and AISC. Keep up to date on new engineering processes, techniques, and IMS and standards. Ensure that effective methods and design/engineering techniques are used. Resolve project issues and problems. Provide technical guidance to co-workers. Contribute to a team environment by accomplishing related results in a cooperative and supportive manner. Works autonomously without direct supervision. Perform other duties as assigned. Job Requirements: Knowledge, Skills & Abilities: Strong working knowledge of design codes such as IRC, IBC, ASCE-7, ACI, and AISC. PE in Texas Should be proficient in using analytical software and have experience using AutoCAD, RISA & Microsoft Office Suite. Strong communication skills and interface skills with clients and project team members. Ability to multi-task, and a willingness to quickly change work assignments. Education & Experience: Minimum of a Bachelor's Degree in Civil/Structural Engineering. 7 plus years of experience residential and commercial engineering. Excellent written and verbal communication skills required. Certificates & Licenses: State of Texas Structural Engineer License #LI-MG1 Job Posted by ApplicantPro