New product introduction engineer jobs near me - 532 jobs

Job Title: Industrial/ Manufacturing Engineer Employment Type: Full-Time We are seeking a highly skilled Industrial/Manufacturing Engineer to support our production operations in Raymond, Ohio. This role focuses on optimizing manufacturing processes, developing tooling and fixture solutions, and supporting welding-related engineering activities across the plant. The ideal candidate will bring strong hands-on engineering expertise, a continuous-improvement mindset, and the ability to work collaboratively with cross-functional teams to enhance quality, safety, and efficiency on the shop floor. Key Responsibilities Process & Manufacturing Engineering Analyze, develop, and improve manufacturing processes to increase productivity, reduce waste, and enhance overall operational efficiency. Perform time studies, workflow analysis, and capacity planning to support production scaling and line balancing. Develop and maintain standardized work instructions, process documentation, and manufacturing guidelines. Tooling & Fixture Development Design, specify, and validate tooling, jigs, and fixtures required for assembly, fabrication, and welding operations. Collaborate with tool shops and suppliers for fabrication, trials, modifications, and implementation of fixtures. Conduct fixture capability studies and ensure tools meet quality, safety, and ergonomic requirements. Welding Engineering Support Provide technical expertise for welding processes (MIG/TIG/spot welding), weld sequence optimization, and weld quality improvement. Support welding equipment setup, parameter development, and troubleshooting. Work with quality teams on weld inspections, defect reduction initiatives, and compliance with welding standards. Continuous Improvement (CI) & Lean Initiatives Implement Lean Manufacturing and Six Sigma methodologies to drive continuous improvement. Lead Kaizen events, root-cause analysis, PFMEA reviews, and corrective action implementation. Identify automation opportunities and support integration of robotics, welding automation, or material-handling improvements. Cross-functional Collaboration Work closely with Production, Quality, Maintenance, and Safety teams to resolve issues and support daily operations. Provide engineering guidance during new product launches, process changes, and equipment commissioning. Support APQP activities, PPAP documentation, and process validation. Qualifications & Experience Required Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or related field. 3-7 years of experience in a manufacturing environment, preferably automotive or heavy industrial. Hands-on experience with tooling, jigs, fixtures, and welding processes. Strong understanding of Lean Manufacturing principles, process flow, and industrial engineering fundamentals. Proficiency in CAD software (SolidWorks, AutoCAD, or similar). Familiarity with PFMEA, control plans, work instructions, and related engineering documentation. Preferred Experience with robotic welding systems or automated welding lines. Knowledge of GD&T and precision fixture design. Working experience with PLC-controlled equipment or automation integration. Certification in welding engineering or Six Sigma (Green Belt or above).

**Must Have Experience in Complex Manufacturing Operations** Continuous Improvement Engineer Responsibilities: Facilitate cross-functional expert teams to drive breakthrough or Best-in-Class performance in People, Quality, Material Flow, and Cost. Identifies key individuals for team membership and secures their approval to become team members. Provides basic Six Sigma training to project team members. Applies Six Sigma tools and techniques to measure, analyze, improve and control project processes. Reports on project progress to Champion and other appropriate leadership levels at least on a monthly basis. Prepares detailed plans to track project performance and assure timely completion and achievement of quality and savings goals. Identifies barriers to project success and solicits help from champions when needed. Attends required training and acquires needed skills. Documents improvement process learning and shares best practices with other Black Belts. Identifies and brings forward to Champion new project opportunities. Accountable to impact on Operational Cost. Complies with all Company Safety policies, procedures and rules. Continuous Improvement Engineer Education and Qualifications: Bachelor's Degree required (Engineering discipline preferred). Must have recent experience in a manufacturing plant preferably in the Automotive industry. Strong communication, presentation, and teamwork skills. Demonstrated high-level performance. Has the initiative to drive change and is motivated to exceed expectations. Possess basic statistical knowledge and the ability to apply statistics to product and process improvement projects. Excellent analytical skills. Six Sigma Green Belt certification is preferred.

The Role The Manufacturing Engineer is responsible for developing automated solutions, implementing new processes, optimizing existing processes, automated data collection, and executing the industrial control and programming strategy for GTI's production facilities. This position will work closely with the multiple teams to ensure flawless and quick speed to market. Success is gauged on the ability to deliver quality, detailed, and efficient solutions at scale. The Manufacturing Engineer will play a pivotal strategic role in priority projects from a feasibility standpoint through a full IQ, OQ, PQ validation and hand-off with a technical transfer to the site production team. They work collaboratively with multiple teams to deliver productivity improvements and Continuous Improvement. Responsibilities 50% travel required Coordinate the efforts of Engineering and technical resources based on Senior Leadership Priorities and Site 90-day plan priorities. Work with other departments (i.e. Prod Development, Project Management, Quality, Compliance, Operations, etc.) to integrate new systems. Dedicate start-up management support for selected complex project integrations. Ensures constant updates are provided to the VP of Manufacturing on the status of projects and improvement efforts in the facilities. SME for automated packaging equipment, flow wrappers, beverage line, multi-combi scales, bag filling equipment, integrations, and automation. Conduct studies, identify problems, recommend alternatives, and implement solutions in coordination with other teams. Develop and deploy automated solutions for numerous processes to gain efficiency and streamline workflows. Provide support to Start-up facilities via technical transfer: Staffing Equipment layout and requirements Construction hand off Regulatory engagement Best-practice processes Technical transfer related to equipment Work with integrators, contractors, and site personnel to bring new functionality online and to troubleshoot issues as they arise. Work with site maintenance and facilities personnel to develop and execute preventative maintenance plans. Maintain up to date as-built records and drawings for existing and new deployments. Integrate existing equipment with live data stream to dashboard with historian, report generation, alarms, notifications, and live visuals for site teams to track daily production. Other duties as assigned Qualifications Bachelor's degree in engineering and 5+ years Operations and Engineering experience in a manufacturing environment. Proven strategic experience in overseeing all aspects of large-scale manufacturing projects Knowledgeable of TPM-based continuous improvement methodology Knowledgeable of Engineering problem solving Able to diagnose complex technical systems and develop simple human-machine interface and training solutions for optimal operations. Experience in industrial networking/automation (SCADA-Ignition, ITOT, cyber security), controls experience (PLC - AB, Omron, Schneider, ladder logic \ STX), business and data analytics for manufacturing operations (Power Bi, Tableau,) vision systems, and robotics. Highly motivated, self-directed, innovative and able to work independently or among teams with keen judgement, common sense and resourcefulness Adapts and thrives in a demanding, start-up, fast-paced environment Possesses a high level of critical thinking Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks. Operates with a high level of professionalism and integrity, including dealing with confidential information Must understand and comply with the rules, regulations, policies, and procedures of GTI Must have a solid understanding of the Medical Marijuana laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws. Safety and Compliance Be aware of hazards in the workspace. Retain and understand department specific training. Report safety incidents/ concerns and comply with follow-up actions. Be compliant with area safety requirements, state regulations and PPE requirements. Follow GMP, biosecurity, sanitation or other quality and compliance requirements. Perform record keeping accurately and completely as directed by a lead or supervisor. Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor. Report and escalate safety & quality concerns. Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product. Ability to work in a fast-paced, changing, and challenging environment Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$90,000-$110,000 USD

LyondellBasell is a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-year legacy that includes a Nobel Prize in Chemistry and our proprietary MoReTec recycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We're addressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society.Come Join an Inclusive Team We are currently seeking to fill a position at LyondellBasell's Bayport Polymers site located 27 miles east of Houston, TX. Our Bayport site has approximately 316 employees and contractors and is a world class chemical manufacturing facility with 4 operating units producing Polypropylene (PP) resins. At the Bayport site we provide a collaborative working environment that supports personal growth, development, and recognition. GoalZero Safety performance is a core value for LyondellBasell. This is an excellent growth opportunity for a degreed engineering professional assigned within the site's Operations organization. The Process Engineer will focus on strategic initiatives necessary to improve the long term viability of all the BYO production lines. This includes but is not limited to identifying quality, reliability, efficiency, and work system opportunities, prioritizing based on value, scoping, and driving implementation via capital or expense project. The Process Engineer will provide technical troubleshooting support for issue(s) that have exhausted the Production Engineer's and/or Specialist's knowledge, and provide long term solutions for temporary improvements implemented by the Production Engineer and/or Specialist. The Process Engineer will play a significant role in defining the unit Process Operating Window (POW) via PHA, alarm rationalization, quality issue resolution, process troubleshooting, etc., and implementing means to monitor.A Day in the Life Prioritize continuous improvement and value generation in quality, reliability, cost, and efficiency. Monitor operations and partner with Operations & Production Engineers on significant production problems requiring advanced engineering support. Collaborate with external organizations (Global Process Design, R&D, Application Development, other polymer sites, GP Mumbai, and corporate functions) to accomplish key initiatives. Mentor and coach less experienced engineers while providing technical training to colleagues. Deliver technical expertise in risk reduction, site performance improvements, and value creation activities (e.g., process hazard analyses, management of change, relief system evaluations, safety‑critical equipment reviews, incident investigations, performance improvement findings, benchmarking gap closure). Provide expertise in relief system design, calculations, and compliance with codes and standards. Uphold strong safety and environmental compliance in all activities. You Bring This Value * Bachelor of Science in Engineering• Demonstrated corporate competencies• Demonstrated troubleshooting skills and techniques• Good computing skills• Demonstrated ability to mentor & coach others in all directions of the organization• Demonstrated knowledge in Process Design Packages and related economics Preferred Qualifications * BS degree in Chemical Engineering• 6+ years industry experience with 3+ years in polymer processes• Process modeling experience • Advanced technical understanding of unit processes• Knowledgeable in the HSE/PSM regulations & Operational Excellence guidelines/ProceduresWhat We Offer LyondellBasell is proud to provide a competitive total compensation package designed to reward excellence and support the well-being of our employees. Our Total Rewards package includes equitable and market-competitive base pay as well as locally relevant incentives, fostering a culture of pay-for-performance that recognizes both individual and company achievements. We extend the following benefits to *eligible employees: Workplace Flexibility: The Company's Global Remote Work Policy allows eligible employees to request to work remotely up to two full days per standard work week at an approved location other than the designated worksite or office, such as at a home office with managerial approval. Comprehensive Health, Welfare, Life and Retirement Programs: Our comprehensive programs are aligned with local practices. 6% LYB match on 401(k) contribution 5% LYB cash balance pension plan accrual Comprehensive Well-being Benefits: Programs to support your physical, mental, financial, and social health, ensuring you receive the care you need, when you need it. Employee Stock Purchase Plan: The LYB ESPP offers a 10% discount on LYB stock for eligible employees in Germany, Italy, Netherlands, Spain, and US. Educational Assistance Program: To encourage self-development by providing financial aid for approved educational activities voluntarily undertaken by employees. Bravo Rewards Program: Recognizing outstanding employee contributions. Robust Medical and Life Insurance Packages: Offering a variety of coverage options to meet individual needs. Professional Development: Opportunities to learn and grow through training, mentoring, work experiences, community involvement, and team building activities. Competitive Vacation Policies: Generous annual leave to support your work-life balance. Global Adoption Policy: Support for employees expanding their families. Matching Gifts Program: Enhance the impact of your charitable contributions to qualified organizations. * Eligibility for certain benefits and rewards programs will vary based on your job status, work location and/or the terms of any applicable collective bargaining agreement and may be changed from time to time without notice, subject to applicable law.Competencies Build PartnershipsDrive InnovationGrow CapabilitiesPromote InclusionMotivational FitTechnical SkillsDeliver ResultsLearn more about our benefits: Benefits/Health & Welfare | LyondellBasell Stay Connected! Visit our LYB Website Follow us on LinkedIn and Instagram Like us on Facebook Subscribe to our YouTube channel LyondellBasell is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, disability, age, veteran status, and other legally protected characteristics. The US EEO is the Law poster is available here.LYB is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need assistance or an accommodation related to LYB's recruiting process, please email us at ***************. Applicants must be at least 18 years old.LyondellBasell does not accept or retain unsolicited résumés or phone calls and/or respond to them or to any third party representing job seekers.Privacy Statement: For information regarding how LyondellBasell processes your personal data, please read our Privacy Statement.

Mindful Quality is hiring for a new role of a Sr. Cleaning Process Engineer. This Sr. Engineer is responsible for supporting cleaning process engineering, analysis and resolution of client's equipment issues, and support client's concerns around maintenance of equipment in cGMP facilities. The Role Development of cleaning process or troubleshooting and resolution of client's cleaning process engineering issues. Analysis and resolution of client's equipment issue related to cleaning processes. Troubleshoot cleaning failures, develop, and optimize cleaning processes. Assess client's maintenance documents to identify regulatory concerns including potential corrective actions in alignment with industry best practices. Support the development of client's corrosion management programs Operation of Metallurgical laboratory equipment to perform sample evaluations Assist in developing and revising standard operating procedures, preventative maintenance, and work instructions Write, revise, and review cleaning and equipment related documents including Master Plans, Project Plans, Batch Records, Standard Operating Procedures, Forms, Protocol, Summary Reports, Forms, Risk Assessments, etc. Can lead client's project with minimal oversight. Interact with team members and clients to create, review, and approve documentation per timeline. Plan and track project deliverables. This includes coordination with internal and external team members. Create, develop, edit, and maintain high-quality documentation following internal and client style guidelines, document standards, and templates, while ensuring that quality targets, timelines, and regulatory requirements are met. Look for ways to continuously improve generated documentation Communicate effectively with team members and external vendors/clients Develop training materials for client staff based on SOPs authored. Mentor and train internal and client staff on engineering principles Other duties as assigned by manager The Candidate Degree in Mechanical Engineering or Biochemical Engineering, other related fields, or equivalent training required. 2-5 years' work experience in metallurgy Formal training in risk analysis Thorough understanding of Quality systems High analytical ability where problems are complex 15+ years' experience in engineering preferrable in cleaning process design and equipment within pharmaceutical industry Must possess good analytical and problem-solving skills and statistical ability Strong working knowledge of Engineering principles, GMPs, and validation Hands-on experience with the following systems: CIP systems, COP systems, and parts washers. Proven ability to review, interpret and make scientific conclusions and recommendations based on data Ability to understand and extract necessary information from technical documents Excellent grammar and writing skills - Required Effectively work within a team environment and interface with peers, management, etc. Ability to work independently, handle multiple tasks simultaneously and to meet critical milestones and goals. - Required Able to effectively manage workload and prioritize activities Proficient computer skills Advanced knowledge of Microsoft Word/Excel/PowerPoint - Required Must be willing to travel to client sites worldwide to support work as needed. Must be willing to lead staff, write protocol/reports, and execute validation activities as required to support client's needs.

At Kovalus Separation Solutions (KSS), we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™. How You'll Add Value… As a Sr. Process Engineer for Water and Wastewater, you will be instrumental in driving our growth in the industrial and municipal water and wastewater markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) A remote position can be considered for the right candidate. Key Responsibilities Develop detailed process design work for commercial water and wastewater treatment membrane filtration processes using UF and RO membrane technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, control philosophies and control sequences. Provide process guidance to Field Service Engineers for startup and troubleshooting of full-scale plants and pilot systems, participating in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities. Completing field test projects by preparing comprehensive reports to be used for both internal and external purposes. Write and present technical papers and seminars for potential end users, engineering companies and OEMs; attend and present paper in tradeshows and conferences. What you'll bring… Qualifications Minimum of 5 years of experience in process engineering design, with a strong focus on water and wastewater treatment applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. Deep understanding of water and wastewater treatment processes in the municipal and industrial applications. Bachelor's degree in chemical or environmental engineering, or in another related discipline. This position is not eligible for Sponsorship Preferred Qualifications 10 or more years of experience working with ultrafiltration membrane systems with primary focus of water and wastewater treatment. Experience with RO membranes including simulations, water chemistry and antiscalant dosing calculations. Experience in working with wastewater treatment simulation models such as BioWin. Hands on experience working on the startup and troubleshooting of full-scale commercial water and wastewater filtration systems or MBR treatment plants. Desire to be an innovator and major contributor to help solve the world's water shortage. Experience working in a dynamic, growth-oriented environment. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, business negotiations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. Annual Compensation range:$96,600-$119,600 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description At Kovalus Separation Solutions (KSS), we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™. How You'll Add Value… As a Sr. Process Engineer for Water and Wastewater, you will be instrumental in driving our growth in the industrial and municipal water and wastewater markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) A remote position can be considered for the right candidate. Key Responsibilities Develop detailed process design work for commercial water and wastewater treatment membrane filtration processes using UF and RO membrane technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, control philosophies and control sequences. Provide process guidance to Field Service Engineers for startup and troubleshooting of full-scale plants and pilot systems, participating in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities. Completing field test projects by preparing comprehensive reports to be used for both internal and external purposes. Write and present technical papers and seminars for potential end users, engineering companies and OEMs; attend and present paper in tradeshows and conferences. What you'll bring… Qualifications Minimum of 5 years of experience in process engineering design, with a strong focus on water and wastewater treatment applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. Deep understanding of water and wastewater treatment processes in the municipal and industrial applications. Bachelor's degree in chemical or environmental engineering, or in another related discipline. This position is not eligible for Sponsorship Preferred Qualifications 10 or more years of experience working with ultrafiltration membrane systems with primary focus of water and wastewater treatment. Experience with RO membranes including simulations, water chemistry and antiscalant dosing calculations. Experience in working with wastewater treatment simulation models such as BioWin. Hands on experience working on the startup and troubleshooting of full-scale commercial water and wastewater filtration systems or MBR treatment plants. Desire to be an innovator and major contributor to help solve the world's water shortage. Experience working in a dynamic, growth-oriented environment. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, business negotiations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. Annual Compensation range:$96,600-$119,600 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Within SSOE's Advanced Technology division, we specialize in high-tech facility design, offering top-tier design and engineering services to a diverse array of clients and markets. Our team is composed of highly skilled and knowledgeable professionals who excel across various disciplines. We pride ourselves on our cross-disciplinary approach, which allows us to understand and address our clients' needs more comprehensively than traditional, siloed methods. What sets us apart is our ability to seamlessly conceptualize, plan, and detail every aspect of design. Our in-house experts collaborate closely, optimizing and enhancing our work through multi-discipline strategy sessions. By leveraging cutting-edge techniques and state-of-the-art software, we deliver industry-leading technology and innovative solutions from day one. We are currently hiring a Sr. Process Engineer to join our dynamic team. In this role, you will engage in the engineering of the world's leading high-tech enterprises. Our Sr. Process Engineers create and work on exciting design-build projects for industrial facilities, semiconductor fabs, manufacturing, and/or similar environments, and to develop innovative solutions for intricate and challenging designs, incorporating the latest design methodologies while ensuring adherence to specifications and timely project completion. The projects will consist of systems that may include: fluid transfer, heat exchange, friction loss in piping systems, designs for ultrapure/high purity water systems, specialty gas and chemical systems, solvent/acid/hazardous wastewater treatment systems or other related systems. This position will be a hybrid position, requiring occasional onsite work. AI and Innovation As part of our commitment to innovation, all team members will be trained on Microsoft Copilot and empowered to use it as a core tool in their everyday work. Responsibilities Lead the design and development of detailed, optimized, and complex process systems for state-of-the-art industrial and high-tech manufacturing design-build projects. These complex systems can consist of systems that may require you to: Lead the design and engineering efforts for systems including fluid transfer, heat exchange, and related systems to meet production requirements. Develop and optimize water purification systems to maintain the highest level of water quality for critical manufacturing processes. Analyze and mitigate friction loss in piping systems to ensure optimal fluid transfer and system performance. Design and implement effective treatment systems for solvents, acids, hazardous waste, and other industrial effluents in compliance with environmental regulations. Design and oversee systems for the safe handling and distribution of specialty gases and chemicals used in manufacturing. Develop process flow diagrams, process, and instrumentation diagrams (P&IDs), system layout plans, routing, equipment/system sizing and selection, and associated specification write-ups. Works to implement, improve, and expand the selection of new and innovative concepts and/or approaches to solve complex challenges, enhance efficiency, reduce waste, and increase productivity. Performs in a role to provide technical direction and guides, supports, and develops all levels of staff throughout the department, so that we meet the client's expectations, scope, budget, and schedule. Identifies, champions, mentors, and coaches the development of our less experienced staff and looks for ways to elevate the technical and professional expertise of the team. Nurtures and promotes collaboration, communication, strategy, and support within your current team, multidisciplinary teams, and inter-company teams to ensure efficiency, quality, and staff resource sharing. Assists all levels of Management in articulating discipline capability requirements in support of strategic and business objectives. Participates in civic, discipline, and professional activities and associations, with technical publication credits as needed. Perform field verifications / site walks to identify, verify, resolve, and incorporate solutions into design packages. May troubleshoot design problems in the field during construction. Qualifications Bachelor Degree from an ABET accredited school in Chemical Engineering or technically related discipline. Active Professional Engineering licensure (PE) in the state of practice or the ability to obtain reciprocity within 6 months of employment is required. Experience designing systems that incompass fluid transfer, heat exchange, friction loss in piping systems, designs for ultrapure/high purity water systems, specialty gas and chemical systems, solvent/acid/hazardous wastewater treatment systems or other related systems. Knowledge of chemical process engineering principals, process engineering design, and/or facilities engineering within an industrial, semiconductor, chemical, or related industries. Experience working with AutoCAD (or similar CAD system) and Revit is required. Experience with PIPE-FLO, and/or other systems is a plus. Demonstrated organizational skills, ability to manage multiple tasks simultaneously, and ability to react to shifting priorities to meet business needs and deadlines. Experience performing field verifications and site walks to identify, verify, resolve, and incorporate solutions into design packages. Ability to troubleshoot design problems in the field. Salary Range: $100,000 - $160,000/year depending on location, education, experience, and any certifications that are directly related to the position. Benefits include health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), opportunities for professional development and training, PTO, & paid holidays. Join us at SSOE, where your expertise will thrive in a dynamic, collaborative environment dedicated to pushing the boundaries of design and engineering excellence. If you're passionate about innovation and eager to make a significant impact, we invite you to apply and become a part of our forward-thinking team.

at Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Before reading the job post, we encourage you to watch this video about our company. It gives you an inside look at how we started, the team and culture that made us successful, and where we're going. It's easy to read a job post and apply, but people often wonder about the culture and whether they would fit in. If you want to call Harrow your home and genuinely want to be part of a family and something big, then we encourage you to click this link and get to know us. Who is Harrow? Harrow (Nasdaq: HROW) is a leading North American ophthalmic-focused pharmaceutical company. Harrow is an incredible entrepreneurial company - where we celebrate the ability of every member of the Harrow Family to be the CEO of their job. Harrow's values have driven interest over the past decade in attracting high-performing professionals in a variety of disciplines. Members of our Harrow Family often express their pride in being a part of our commitment to (1) innovation, (2) patient access to affordable medicines, and (3) our track record of having never turned down an ophthalmologist doing mission work around the world - providing free medicines in support of mission work aimed at giving or maintaining the gift of sight to those most in need . We encourage you to learn more about Harrow and its unique culture to see if you're the right person to help contribute as we build a truly exceptional company, one we are all so proud of! Harrow's ophthalmic pharmaceutical portfolio is one of the most comprehensive in the industry, including: An expanding Posterior Portfolio including IHEEZO and TRIESENCE A broad Dry Eye Disease product line, led by VEVYE and bolstered by well-known adjacent ocular surface disease products such as FLAREX and TOBRADEX ST A Specialty Anterior Segment product line, which includes various high-need and utility products such as ILEVRO , NEVANAC , and VERKAZIA Job Summary The Senior Process Engineer at Harrow will play a crucial role in the tech transfer of FDA-approved drug products to contract manufacturing organizations (CMOs). Reporting directly to the Sr. Director of Manufacturing Science & Technology (MS&T), the Senior Process Engineer will ensure the seamless transition of drug products from development to commercial production. Core Responsibilities Lead technology transfer of branded ophthalmic products to cGMP Contract Manufacturing Organizations (CMOs). Serve as the primary point of contact with CMOs and external partners for all technology transfer activities. Prepare, review, and approve technical documentation-including protocols, reports, and product/process validation packages (IQ, OQ, PQ)-to ensure accuracy and completeness. Provide technical leadership in CMO project transfer meetings, offering guidance and managing deliverables. Collaborate cross-functionally with MS&T, Quality Assurance, Quality Control, Supply Chain, and other departments to ensure seamless transfer and maintenance of processes at CMOs. Compile and analyze process data, communicate project status, identify trends, and meet internal and external reporting requirements. Support CMO selection by assessing manufacturing capabilities and driving initiatives to reduce and improve process variability. Troubleshoot and resolve manufacturing challenges by identifying root causes and implementing effective corrective actions. Provide process engineering recommendations to ensure transferred products are robust, compliant, and aligned with current manufacturing technologies. Partner with manufacturing teams to ensure compliance and product quality throughout the entire engineering and commercial operations process. Oversee product transitions into CMOs, ensuring readiness for production, quality assurance, and regulatory compliance. Serve as Subject Matter Expert (SME) for critical processes and provide technical leadership across the organization. Qualifications & Requirements Bachelor's degree in pharmacy, chemistry, or pharmaceutical engineering with at least six years' pertinent and progressive experience or Master's degree with minimum of three years' experience. Experience in Formulations, Process Development or Technical Services, with direct experience in formulation and process development of Sterile Products. Strong understanding of aseptic manufacturing, aseptic filling and sterilization required. Position Type Remote Travel Minimal travel to CMOs might be necessary.

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. In the Manufacturing Engineer I role, you will have the opportunity to participate and contribute in process and product modifications, standards and improvements through knowledge of manufacturing equipment and processes, while increasing product quality, output and cost effectiveness for the corporation. Qualified candidates must be able to work an on-site schedule at our Chillicothe, MO facility. Role Responsibilities: * Supports product quality by development and implementation of methods and procedures for process control, process improvement, testing and inspection to ensure that the products are free of flaws and function as designed. * Performs product testing and analysis to ensure that potential defects and failure rates are minimized, and quality levels are maintained in the most efficient and cost-effective manner. * Implements quality control process sampling systems, procedures and statistical techniques. * Analyzes production limitations, standards, reports and defective products to determine trends and recommends corrective actions. * Recommends revision of specifications when indicated. * Represents quality assurance in product design and development projects. Develops the economics of any quality control programs when required. * Develop and update operating instructions for standardized and safe use of equipment. * Conduct testing of products and processes to ensure production occurs in an efficient and cost-effective manner. * Conducts studies for process and product improvements that are aligned with specifications, quality standards and cost estimates. * Conduct studies of plant layout, production line efficiency and production line control and prepare recommendations to increase product quality and effectiveness. * Provide technical support to developers to ensure developed processes and products function as required and are manufacturable. TRAVEL Up to 5% Minimum Qualifications: * High School Diploma * (6) months experience in the manufacturing field Preferred Qualifications: * Bachelor's degree in engineering or related field * 3+ years in relevant quality / manufacturing experience * Ability to effectively communicate internally (within the facility and with Corporate Support personnel) and externally with leaders in the supply chain and even with Customer contacts as needed * Ability to work independently without direct supervision * Communicate and collaborate with internal cross functional groups to improve production process with the goal of maintaining a repeatable process and quality product * Able to perform trouble shooting activities to determine root cause, propose and implement solutions to reduce risk and update documented processes Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Manufacturing Engineering, Supply Chain, Root Cause Analysis Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

ABOUT US Matrix Technologies, Inc. has been a leading provider of engineering, automation, and systems integration services since 1980. Guided by "The Matrix Way," we value teamwork, collaboration, and fun. Recognized as a Top Workplace, we offer flexible schedules, professional growth opportunities, and market-leading compensation. Our expertise spans multiple industries, and 87% of our projects are from repeat clients, showcasing our commitment to quality and customer satisfaction. Come experience "A Better Process for Success" with us. Culture matters! At Matrix, our core purpose is Enhancing People's Lives...Every Day. Our fundamentals guide our culture, and you can learn more about our unique environment here: ************************* OVERVIEW Join our team as a Senior Process Engineer! This is an in office role based out of our Maumee, Ohio office. We are seeking a highly skilled and motivated Senior Process Engineer with a strong background in refining processes within the oil and gas industry, particularly in the Northwest Ohio region. The ideal candidate will play a key role in both project execution and business development, leveraging existing relationships with regional refineries to drive growth and expand our presence. KEY RESPONSIBILITIES * Engage with plant personnel, clients, and stakeholders to understand operational needs and identify project opportunities. * Leverage existing relationships at Northwest Ohio refineries to support strategic business development and expand client accounts. * Conduct site visits, feasibility studies, and process evaluations to support client goals and safety compliance. * Lead or support engineering projects in refining, including process improvements, retrofits, debottlenecking, and new unit designs. * Collaborate with internal multi-discipline teams including mechanical, electrical, and automation engineers. * Support process safety efforts including HAZOPs, PHA facilitation, and regulatory compliance activities. * Mentor and guide junior engineers, sharing technical knowledge and industry insights to support professional development and strengthen the team. Minimum Qualifications * Bachelor's degree in Chemical Engineering or equivalent. * 8+ years of experience in the oil and gas industry, with specific experience in refinery operations or projects. * Demonstrated knowledge of refining processes such as distillation, hydrotreating, catalytic cracking, reforming, etc. * Strong working relationships with key personnel at refineries located in or near Northwest Ohio. * Excellent communication skills and a client-focused mindset. * Ability to work independently and manage multiple priorities effectively. Preferred Qualifications * Experience with process simulation tools (Aspen Plus, HYSYS, ProMax, etc.) * Familiarity with OSHA PSM regulations and PHA participation or facilitation. * Prior experience developing proposals, scopes of work, or cost estimates. * Professional Engineering (PE) license or ability to obtain one is a plus. PHYSICAL REQUIREMENTS * While performing the duties of this job, the employee is occasionally required to stand; walk; sit; stoop, kneel, crouch; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk, and hear. * The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 25 pounds. * Specific vision abilities required by the job include close vision, distance vision, color, vision, peripheral vision, depth perception, and the ability to adjust focus. * This employee may perform industrial field work which could include exposure to hazardous locations, inclement weather, moving mechanical parts, noise, ladders, uneven ground, and stairs. * This employee may perform industrial field work which could include exposure to a wide range of known food allergens. WHY MATRIX? Physical and Mental Wellness and Work/Life Balance: * Health Insurance with Prescription Drug Coverage, Dental and Vision Insurance * Generous Paid Time Off (Extra Days for Purchase) and Nine Paid Holidays * Paid Parental Leave, Bereavement Leave * Flexible Work Schedules, Work at Home Options * Wellness Program with Incentive Dollars, Preventative Health Screenings * Employee Assistance Program (EAP), Critical Illness and Accident Insurance Financial Wellness: * Employee Stock Ownership Plan (ESOP) * 401(k) and Roth Plans with 5% Match and immediate vesting upon enrollment * Market-based competitive Compensation and Overtime Pay for Salaried positions * Quarterly Bonus Program and Spot Bonus Program * Pre-Tax Health Savings Account (HSA) with Match, and Pre-Tax Flexible Spending Account (FSA) * Life Insurance Paid by Matrix and Buy-Up Options * Short-Term and Long-Term Disability Plan Paid by Matrix Personal and Professional Growth: * Technical, Managerial, and Administrative Career Paths * Onboarding and Mentoring, Internal Training and Cross Training * PE Certifications, Registration, and Renewals * Assessments and Leadership Development * External Certification Programs, Professional Memberships * Tuition Reimbursement Program Recognition, Culture, and Other Perks: * Regular Employee Updates and Town Halls, Annual Engagement Surveys * Employee Service Awards and Peer Recognition * Strong Fundamentals (Core Values) * Employee Referral Program/Bonus * Casual Dress * Discount Programs * Community Involvement Committee * Sports Teams and Clubs We offer market-competitive compensation for a Senior Process Engineer with a base range of $90,000 to $115,000 annually, and a total compensation package that includes quarterly bonuses, and 401(k) matching. Salaries are based on experience, skills, and qualifications. Matrix Technologies, Inc. is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, marital status, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.

The Manufacturing Engineer I is responsible for developing, designing, implementing and managing tooling, processes and procedures. This position will train all personnel on improvements or implementation of tooling, processes and procedures. This position is responsible for managing one or more projects that may include large capital expenditures or cost saving initiatives that positively impact safety, maintenance, quality, on time delivery (OTD), efficiency and inventory. The Manufacturing Engineer will support manufacturing for all types of continuous improvement activities and may also participate on or co-lead continuous improvement events. This position will also assist in the execution of Engineered to Order (ETO) sold projects as they are shared between design and manufacturing processes. Essential Job Functions * Design, justify, implement and manage capital projects including machine and fixturing purchases, shop floor layout designs, material handling equipment, product troubleshooting, etc. * Develop training materials and train all personnel on improved or new tooling, machines, processes and procedures. * Create and execute improvements to achieve goals established in Key Performance Indicators (KPIs). * Utilize scorecard performance and key metrics to prioritize efforts on tasks and projects. * Use real-time problem-solving tools to implement root cause solutions surrounding safety, quality, OTD, productivity, efficiency, cost savings, etc. * Support new product development and ETO projects ensuring successful manufacturability. * Implement and maintain 5S and housekeeping efforts throughout manufacturing and in collaboration with direct personnel. * Collaborate with the hourly production coworkers to improve their daily work as needed or required. * Collaborate and build relationship with Planners and Engineering to maintain routers in JDE to support accurate costing and profitability. * Collaborate and build relationships with other professional disciplines throughout the business on technical inquiries and needs. * Collaborate and build relationships with sales and marketing to develop new product offerings in a research and development capacity. * Provide training and guidance to other Manufacturing Engineering Technicians as needed. * Leverage knowledge of Manufacturing Engineer II in regards to design methodology, skills, and tools. * Travel including international, could be up to 15% as required by the project or other needs. * Must have a valid driver's license * Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position * The ability to work in a constant state of alertness and safe manner. Knowledge, Skills, Abilities (Competencies) * Metal forming, welding, grinding, machining, manufacturing, including general CAM and/or layout experience. * Must have a thorough understanding of drafting and knowledge of engineering principals and techniques including various sheet metal fabrication processes and installation procedures * Knowledge of Lean manufacturing knowledge or related concepts. * Ability to work well under pressure and manage time effectively in a constantly changing and time sensitive environment while prioritizing multiple tasks in parallel. * Excellent communication skills both orally and written with keen attention to detail. * Ability to take initiative to develop new strategies and outside-the-box ideas. * Self-starter and goal oriented who will aggressively pursue successful resolution of safety risks in a timely manner. * Ability to work independently or collaboratively with a team. * Ability to establish and maintain working relationships with individuals at all levels of the organization. * Strong interpersonal skills with a mechanical aptitude. * Ability to efficiently utilize Microsoft Office. AutoCAD experience required. Education and Experience * Bachelor of Science in Engineering or similar degree program is required. * One (1) to three (3) years related experience preferred. Base Compensation Range: $59,159 - $88,739 annually Variable Compensation Range: Incentive bonus eligibility up to 10% of gross annual salary base on company performance (as of 2024). Health and Ancillary Benefit Overview: * Medical, Dental & Vision Insurance with low employee premiums * Free off-site medical clinic * Company paid Life Insurance & Short-Term Disability * 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more * Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades * Paid Time Off and Sick, Family & Parental Paid Time Off * Ten (10) Paid Holidays * Four-day work weeks, varied shifts, and flexible remote work options depending on position * Career progression program for advancement * Free in-house welding, grinding & machine operation school * In-house training program Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures.

The Manufacturing Engineer will serve as a key link between design, production, and quality functions. This role is responsible for supporting production, translating product designs into manufacturable, cost‑effective processes while ensuring product quality, regulatory compliance, and continuous improvement. The candidate will lead process design, tooling development, capacity planning, and plant layout project work, using data‑driven analysis, and Lean Six Sigma principles. Core responsibilities: Process Design & Implementation Design production processes Determine equipment and tooling requirements Conduct feasibility studies and pilot runs. Process Optimization & Continuous Improvement Apply Six Sigma, Kaizen, and other methodologies Identify waste, reduce cycle time, improve throughput Lead Define/Measure/Analyze/Improve/Control (DMAIC) projects with measurable Key Performance Indicators (KPIs). Tooling & Fixture Design Maintain tooling inventory Ensure supporting equipment calibration based on production needs. Production Capacity & Layout Planning Conduct capacity analysis Recommend plant layout changes Support new equipment installation Evaluate line balancing and takt time alignment. Cost Analysis & Cost Reduction Prepare cost/benefit analyses for proposed process changes Identify opportunities to reduce material, tooling, and labour costs. Quality & Compliance Support Collaborate with Quality Assurance (QA)/Quality Compliance (QC) teams Ensure processes meet specifications and regulatory standards Address root causes of non-conformities Data Analysis & Reporting Collect, analyze, and visualize data (scatter plots, control charts, Pareto, etc.) Build dashboards for real-time production monitoring Training & Knowledge Transfer Train production staff on new procedures and equipment Develop training materials and conduct workshops Continuous Learning & Innovation Stay updated on industry trends and new manufacturing technologies Evaluate applicability of automation, additive manufacturing, and smart factory concepts. Equal Opportunity Statement Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. Education Bachelor's degree in mechanical, Industrial, Manufacturing Engineering, or a related field Master's degree is considered a plus. Experience Minimum of 3+ years in a manufacturing or production engineering role Preferably within a related industry. SAP, Windchill, MS Excel, Visio and PowerPoint. SolidWorks and Colab About us Headquartered in Ottawa, Lockheed Martin Canada is the Canadian unit of Lockheed Martin Corporation, a global defense technology company driving innovation and advancing scientific discovery. Our all-domain mission solutions and 21st Century Security vision accelerate the delivery of transformative technologies to ensure those we serve always stay ahead of ready. We operate major facilities in Ottawa, Montreal, Halifax, Calgary and Victoria and work on a wide range of programs from advanced naval technology products, aircraft sustainment, and unmanned systems software. This position is part of the Rotary and Mission Systems business area, where employees across Canada support engineering, systems integration, training, sustainment and in-service support programs for Canadian and international military customers across land, air and sea. What we offer you We walk our talk when it comes to work/life balance! Your physical, mental and financial wellbeing matters to us. On top of working in a highly supportive, friendly, respectful environment, this is what you can expect when you join our team as a Regular Full-Time employee: Flexible, compressed work schedules, depending on business requirements, where you have the option of Fridays off, as well as the possibility to work remote part-time Competitive compensation Time to recharge with vacation, personal days, holidays, and parental leaves Comprehensive Family Medical, Dental and Vision coverage available on your first day of employment, along with: Virtual Health Care (24/7 access to medical professionals) A Wellness Spending Account to aid in your wellness journey Employee & Family Assistance Program (EFAP) which includes free face to face counselling sessions Medical Travel Insurance Onsite fitness facilities at our main office locations A Registered Retirement Savings Plan that includes matching company contributions on your first day of employment, that also includes access to Financial Advisors providing investment advice and comprehensive financial planning Employee discounts to save on goods, services and various recreational activities Access to a robust spectrum of development resources to enhance your skills and/or advance your career including: Free learning resources through a modern and engaging platform Education Assistance Program Reimbursement for a professional membership Self-directed Mentoring Controlled Goods Program

Responsibilities: * Ability to identify Manufacturing Process Constraints * Design and implement Manufacturing Process Improvements * Verify BOM accuracy * Identify and implement Methods improvements * Document and preparation of work instructions * Identify and select Manufacturing Capital Equipment and prepare necessary appropriations requests * Compare forecasts against Machine and Process capacities and implement improvement plans * Time standard development, establishing unique routing for special products, advising Product Engineering on product development and design, and participating in appropriate cross-functional programs and projects Requirements: * BSME/IE/Business Operations Management and 0-3 years professional Manufacturing experience; or a 2-year technical degree and 3-5 years professional Manufacturing experience; or a High School Diploma and 5+ years professional Manufacturing experience * MRP Proficiency required Preferred Qualifications: * Understand and apply Methods Analysis * Mechanical aptitude and knowledge of Products and Processes * Design tooling and manufacturing fixtures * PC Proficient EDUCATION AND CERTIFICATIONS BSME/IE/Business Operations Management and 0-3 year(s) professional Manufacturing experience; or a 2-year technical degree and 3-5 years professional Manufacturing experience; or a High School Diploma and 5+ years professional Manufacturing experience PHYSICAL REQUIREMENTS No Special Physical Requirements ENVIRONMENTAL DEMANDS N/A TRAVEL TIME REQUIRED N/A OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development * Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

**What Commercial Technologies Software Engineering contributes to Cardinal Health** Commercial Technologies manages the enterprise's portfolio of commercial technologies to maximize the business value of the technologies and enhance the customer experience. This function creates strategies for the portfolio and innovative solutions based on relationships with business leaders, develops back-end solutions and capabilities, and improves the front-end experience. Commercial Technologies Software Engineering develops design options, process improvements and back-end solutions for commercial technologies to maximize performance and suitability for business needs. This job family manages engineering projects and plans for commercial technologies and interfaces with product managers to develop objectives. This job family assesses product systems, identifies opportunities for process and system improvements, and develops solutions through application of engineering principles. **Responsibilities** + Responsible for designing, developing, implementing, and supporting applications, systems and IT products required to achieve business objectives. + Plans and executes system implementations that ensure success and minimize risk of system outages or other negative production impacts. + Demonstrates problem solving ability that allows for effective and timely resolution of system issues including but not limited to production outages. + Analyze production system operations using tools such as monitoring, capacity analysis and outage root cause analysis to identify and drive change to ensure continuous improvement in system stability and performance. + Provide technical guidance to managed service partners. + Participate in code and design planning/reviews to ensure industry standards and best practices are being met + Establish and develop relations with business stakeholders + Design & customize technological systems and platforms to improve customer experience + Ensure aligned objectives and execution across internal and external stakeholders to create mutually beneficial partnerships to identify areas of growth and innovation + Advise on short and long term technology and growth planning + Ensure product and services are compliant with company's policies + Manage strategic partnerships with preferred technology vendors + Recommends new practices, processes, metrics, or models + Must be able to define tasks, milestones, and deliverables that meet stated project objectives + Independently determines method for completion of new projects + Serve as an escalation point for complex functional and technical issues + Provide end-to-end views on how all components fit together + "Connecting dots" across various business and technology areas **Qualifications** + 4-8 years of experience, preferred + Bachelor's degree in related field, or equivalent work experience, preferred + Experience in T-SQL, Windows Servers, .Net, Azure Logic Apps & pipelines, Swaggerhub, APIGEE, Splunk, Postman, Azure devops + Experience with GuardianRX, Cperx, Queen City, CMS Wordlink, Omnisys, and Genesis a PLUS + Experience in designing, building, deploying, managing, and enhancing applications within the Software Development Life Cycle (SDLC) processes including requirement analysis and system design, and/or software engineering principles + Experience with CI/CD pipelines such as Azure Dev Ops, GIT + Working experience translating business objectives into Strategic technology plans + Strong leadership skills, including the ability to effectively partner with business leadership and key business stakeholders. + Strategic mindset and ability to lead with business objectives + Strong understanding of infrastructure platforms such as operating systems, databases, application servers, cloud. + Strong understanding of industry trends and relevant emerging technologies + Strong problem solving and analytical skills, and the ability to communicate technical information to both technical and non-technical users across various domains. + Perspective on industry-wide best-practices + Experience in Healthcare industry a plus + Experience in data analytics and/or data science a plus + Enterprise or Solution Architecture experience a plus **What is expected of you and others at this level** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $93,500 - $140,280 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 10/30/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Acute Care Technology The Operations group is offering a Co-op opportunity, in which the student will report to Manufacturing Engineering Department and work cross functionally with various operations personnel on a variety of projects. Must be enrolled in an undergrad or graduate degree program. NOTE: This is a college Co-op position - applicants must be enrolled in a degree program at the start of the Co-op. The Co-op will be from January 2026 thru August 2026. Skills Requirements: * Willing to work for cross functional teams (Electrical, Mechanical, Industrial and Quality engineering). * Design parts, assemblies, and fixtures using 3D CAD (SolidWorks) * The desire and ability to learn and apply Lean/6Sigma techniques to steer improvements to quality, cost and delivery * Good interpersonal skills and well organized * Excellent written and verbal communication skills * Demonstrated ability to understand, analyze and assess a wide variety of business and/or product concerns and determine logical actions * Able to organize and present ideas in a convincing and compelling manner * Contribute effectively to building and sustaining a collaborative environment, promoting commitment to achieve business goals * Experience in Microsoft Word, Excel, and PowerPoint is essential * Ability to work independently as well as take direction and complete tasks with or without help or supervision. * Experience in creating engineering changes and validation activities a plus. Required/Preferred Education and Experience: * In pursuit of Bachelor's degree in Mechanical, Industrial, Manufacturing, Electrical Engineering or similar * Minimum completion of first year with a minimum of 2.5 GPA. * Direct experience in manufacturing or production environment a plus. * Authorized to work in U.S. ZOLL Medical Corporation appreciates and values diversity. We are an Equal Opportunity Employer M/F/D/V. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990 The hourly pay rate for this position is: $20.10 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose Collaborate with body design from feasibility through design phase to achieve a product that can be manufactured with-in the factory's capabilities while working with MMC's to prepare and execute the trial phase of the new model development. Key Accountabilities Conduct feasibilities studies on new technologies, design concepts and equipment. Review drawings with internal team and customers to verify the design. Identify past model problem history, opportunities for cost savings and safety concerns. Communicate change points to other departments. Issue countermeasure request forms to R&D Department for improvements in quality, cost, delivery, safety and assembly. Develop and present project status updates, change points, recommendations, etc. Identify and document trial problems and discuss countermeasures. Support quality problems and recommend countermeasures. Support equipment installs and robot programming. Support build event preparation and execution. Qualifications, Experience, and Skills Bachelor's degree in engineering or equivalent experience. 0-2 years' relevant experience based on education - 6 years required without relevant degree. Excel, Power Point, Basic Robot knowledge, Catia. Working Conditions Generally first shift production hours, occasional split/second shift support required. 0-5 hours OT weekly. 50% Fast-paced high-energy manufacturing environment, 50% office environment. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.