Manufacturing Quality Engineer jobs at nLIGHT - 207 jobs

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years composite or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Janicki Industries is an innovative, family-owned aerospace company located at the foot of the Cascades. We focus on engineering and manufacturing complex projects for companies in the aerospace, defense, and space industries. We are looking for a Manufacturing Engineer to join our growing team. This position is located on-site in Hamilton, Washington State. POSITION DESCRIPTION The Manufacturing Engineer for Assembly is responsible for supporting all technical aspects of the value stream including but not limited to Finishing, Assembly, Metrology, and other aspects to meet the customers' requirements. The following essential job functions are performed as Manufacturing Engineer - Assembly: Works directly with internal teams to give technical guidance. Provides feedback on designs and drawings for manufacturability and specification compliance Identifies opportunities for process improvement in both manufacturing and design standards Investigates and evaluates new technologies Champions quality standards Manages and communicates changes to best practices and standards across the company Assist with manufacturing plans Identifies areas of improvement in final assembly and manages initiatives to completion Challenges convention to foster innovative thinking Reviews and ensures internal standards and customer requirements are being followed Interacts frequently with shop floor to ensure project health; have a daily presence on shop floor Shall, at all times, demonstrate cooperative behavior with colleagues and supervisors Must be at work on time and maintain good attendance. This is a condition of employment and is an essential function of the job Performs other duties as assigned QUALIFICATIONS Due to our ITAR and EAR regulations, applicants must be a US Citizen or of Legal Permanent Resident Status as defined by 8 U.S.C. 1324b (a) (3). This position requires the ability to obtain a U.S. Secret Security Clearance (U.S. Citizenship Required). Janicki will assist with gaining this access once employed. Special Access Program or other Government Access Requirements are mandatory for this position and requires candidate agreed to enter a Continuous Evaluation program. EDUCATION/EXPERIENCE Bachelor's Degree in Manufacturing Engineering/Engineering Technology, Mechanical Engineering, or a similar field is required. Must be familiar with Microsoft Office products and SAP. Experience working with all aspects of tooling fabrication, including Fabrication, milling, and assembly, in a lean manufacturing environment required. Demonstrated leadership capabilities Proficiency with Microsoft Office software is required Must be willing and able to obtain a government issued security clearance. Minimum requirement for all positions is a high school diploma or GED Must have effective verbal and written communication skills in the English language ADDITIONAL INFORMATION Wage range for this role is between $83,000 - $145,000 plus a discretionary bonus, 401(k) matching, vacation, and health benefits. Employees can also receive additional pay for off-shifts, off-site work, and access pay. The range provided is Janicki's estimate of the base compensation for this role. Actual amount offered will be based on job-related and non-discriminatory factors such as experience, location, education, training, skills, and abilities BENEFITS Medical, dental, and vision insurance with employer contribution Disability insurance as well as Life/AD&D insurance HSA (Health Savings Account) with employer contribution and FSA (Flexible Savings Account) 401k with employer matching Paid time off and paid holidays (including two floating holidays) Education reimbursement program Several shift options Premium pay for off-shifts Premium pay for security clearance if applicable Not sure that you'll be the perfect fit for this role? You should still apply! We'll review your application for other opportunities. We are always on the lookout for talented people! Janicki Industries is an Equal Opportunity Employer. Janicki Industries does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, marital or familial status, physical or mental disability, genetic information, age, retaliation, veteran/military service status, or any other legally protected status. Janicki is proud to be a military friendly employer. Applicants or employees wishing to view a copy of Janicki Industries' Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at **************. As a federal government contractor and a recipient of federal funding, Janicki is required to abide by federal drug testing requirements (including preemployment drug testing for cannabis). Additionally, because of Janicki's work on aerospace products and the high volume of safety sensitive positions, Janicki takes the safety of its employees very seriously and requires that employees pass a preemployment drug test prior to starting employment.

Company: Mark VII Equipment Inc. - North America's leading car wash system manufacturer Salary: $90,000-130,000 per year (Exempt) Why Mark VII As part of the global WashTec Group, Mark VII combines German engineering with American ingenuity to deliver cutting-edge car wash systems. We're a team of passionate problem-solvers committed to excellence and continuous improvement. Your work here will directly impact on how our products are built and delivered. About the Role Join Mark VII and help shape the future of manufacturing. As a Manufacturing Engineer, you'll be the critical link between design and production-driving process improvements, launching new products, and solving real-world challenges in a fast-paced, collaborative environment. Key Responsibilities Sustaining Engineering (30%): Support Purchasing, Production, and Service help resolve issues on existing equipment. Work closely with Engineers and other departments to improve efficiencies and reduce costs. Value Optimization (20%): Analyze and optimize specifications for mechanical and electromechanical components (e.g., pumps, motors, electrical systems) to identify cost-saving opportunities. Collaborate with suppliers and internal teams to validate alternative parts or methods that reduce total cost of production, support, and service. Mechanical Design (20%): Lead redesign efforts for parts, assemblies, and sheet metal components with a strong emphasis on minimizing material usage and simplifying production processes. Drive design decisions from concept through prototyping and launch to achieve measurable cost reductions on the current product line. Production Support (20%): Directly support manufacturing, ensuring that parts and assemblies are produced according to specifications and standards procedures. Identify opportunities for improved reliability and efficiency, executing on any design or engineering changes. Resolve manufacturing issues as they arise across production processes. Documentation (10%): Assist in documenting engineering changes, CAD models, BOMs, and cost improvements. Multi-Project Management: Contribute to multiple concurrent projects, prioritizing initiatives that deliver high ROI. Qualifications Bachelor's degree in mechanical, Industrial, or Manufacturing Engineering, or a related field 2-5 years of experience in a manufacturing environment Strong analytical and problem-solving abilities Advanced proficiency in solid modeling techniques and programs (Solid Edge preferred). Proven experience in mechanical design of sheet metal parts and assemblies. Extensive knowledge of common techniques including DFM/DFA, PFMEA, and value engineering. Strong mathematical skills and ability to work with technical instructions, diagrams, and equations. Dedication to thorough tracking of design files, solid models, cost BOMs, and change histories. Ability to write detailed technical production documentation including Work Instructions and SOPs. Occasional travel (0-10%) to local suppliers and manufacturers if needed. Strong communication and interpersonal skills. What We Offer Hiring range: $90,000-130,000 annually depending on qualifications and experience Comprehensive benefits: medical, dental, vision, life, and disability insurance 401(k) with company match Paid time off, holidays, and flexible scheduling On-site role in Arvada, CO with hands-on engagement A culture that values innovation, collaboration, and professional growth Behaviors We Value Integrity: We operate with unwavering integrity and a commitment to ethical standards. Accountability: You're dependable under pressure, consistently meeting deadlines and delivering results. Passion & Drive: We're a team of high-energy professionals focused on impactful execution. Your enthusiastic, "can-do" attitude will inspire those around you. Strong Work Ethic: You're driven to make a real impact. While we champion work-life balance, we also expect a strong commitment to doing whatever it takes to succeed in our fast-paced environment. Customer-Focused: You instinctively put the customer first, shaping every task and decision with their needs in mind. Supportive Team Player: You bring emotional intelligence and common sense to the team, supporting your colleagues and contributing to our positive culture. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Ability to perform work in a sedentary position for extended periods, with frequent use of a computer, keyboard, and mouse. The role requires close visual acuity to perform activities such as analyzing data, creating designs, and viewing a computer terminal. Clear and effective verbal communication skills are essential for collaborating with team members and external stakeholders. The ability to occasionally lift and move up to 10 lbs. of equipment or documents. About Mark VII Equipment Inc. - Manufacturing Excellence in Vehicle Wash Systems Mark VII Equipment Inc. is the North American subsidiary of WashTec AG, the global leader in vehicle wash technology based in Germany. Every day, over 2 million vehicles worldwide are cleaned using our cutting-edge equipment-designed, built, and supported by teams like ours. We serve a wide range of customers, including gas stations, convenience stores, retail car wash operators, auto dealerships, and fleet managers. Our product portfolio includes: SoftWash XT & SoftWash DF AquaJet XT ChoiceWash XT AquaDri JetWash SoftLine & SoftLine2 A full suite of chemicals and ancillary equipment As a Manufacturing Engineer, you'll play a critical role in driving innovation, improving production processes, and ensuring the highest standards of quality and efficiency across our operations. Join us in shaping the future of automated vehicle care-where precision engineering meets real-world impact. How to Apply If you're ready to make a difference and grow your career, we want to hear from you. Apply today on our website ********************** and help us build smarter, cleaner manufacturing solutions. Disclaimer The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Federal law obliges us to provide reasonable accommodation to the known disabilities of employees, unless to do so would pose an undue hardship. Please let us know as soon as possible if you need accommodation to complete these listed essential functions.

This position is part of the Manufacturing Engineering Department and is the technical lead responsible for opto-mechanical assembly, alignment and test of Coherent Bio-Instrumentation Laser Engine products. The high-level goals for this position are to support manufacturing initiatives and improvements of manufacturing processes, looking for opportunities to reduce costs, improve yields and increase throughput whilst maintaining high quality levels. The role also includes interfacing with some of Coherent's overseas manufacturing facilities. Multi-disciplinary problem solving as well as data analysis are primary aspects of this position. Primary Duties & Responsibilities * Provides technical ownership and manufacturing support for one or more Laser Engine product lines. * Support manufacturing initiatives and improvements of Laser Engine manufacturing processes * Drive yield and cost improvements and support capacity increases * Work on customer RMA events, providing robust containment and resolution and using an 8D report format * Determine root cause and corrective actions to resolve manufacturing issues involving noncompliant product or material. * Submit formal changes required for improvements or issue resolution, coordinating with other teams as needed * Create and maintain detailed work instructions to support equipment operation and processes. * Provide training to production staff on new or updated processes * Assist forecasting capital equipment requirements in advance of need. * Discuss technical issues with production techs & assemblers to help resolve issues or implement improvement actions * Working with purchasing team and vendors on material issues or improvements and conducting first article inspection assessments. Education & Experience * Minimum 5yr. experience in high-tech manufacturing environment * BS/MS Optics, Optoelectronics, Physics or equivalent degree. Skills * Hands-on experience with optical alignment, opto-mechanical assembly and test, including the use of optical and electrical photonics test equipment. * Practical working knowledge of a variety of lasers, particularly solid state lasers, including safety, setup, operation and troubleshooting * Strong background in procedure development, documentation and training tasks * Proven record of process and fixture development for builds with exacting laser beam shaping and control requirements * Strong practical experience manufacturing engineering support in high tech, low volume environment * Broad understanding of optical, mechanical, and electronic engineering concepts. * Ability to read and understand engineering drawings, interpret tolerances, define lean work flows and create value stream maps. * Knowledge and understanding of design for manufacturability across a variety of manufacturing processes. * Readily able to collate and analyze data and communicate technical and manufacturing information across a range of audiences * Ability to set up and use statistical process control methods * Understanding of Lean Manufacturing, 6σ, structured problem solving, Toyota PS, and Continuous Improvement methodologies. * Strong self-starter with experience managing multiple projects with accountability and ownership. * Experience working with vendors for component improvements and issue resolution * Experience supporting off-shore or contract manufacturing partners and suppliers * Ability to manage multiple projects with accountability and ownership * Project management skills working within an NPI phase-gate product development processes. Experience in these areas will be advantageous: * Automation for the builds of precision optical alignment systems * Understanding of MRP planning systems and Bill of Material structures. Oracle expertise preferred. * Understanding of MRP planning systems [RD1] and Bill of Material structures * Experience with working in Quality Management Systems like IS09001 * Electronics, basic circuit trouble shooting * Oracle MPR system * Statistical analysis software, i.e.: Minitab or JMP * Programming skills, i.e.: LabView * Computer Aided Design and 3D Printing * Previous or current LSO (Laser Safety Officer) Working Conditions * Mon-Fri on site Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ******************************.

This position is part of the Manufacturing Engineering Department and is the technical lead responsible for opto-mechanical assembly, alignment and test of Coherent Bio-Instrumentation Laser Engine products. The high-level goals for this position are to support manufacturing initiatives and improvements of manufacturing processes, looking for opportunities to reduce costs, improve yields and increase throughput whilst maintaining high quality levels. The role also includes interfacing with some of Coherent's overseas manufacturing facilities. Multi-disciplinary problem solving as well as data analysis are primary aspects of this position. Primary Duties & Responsibilities Provides technical ownership and manufacturing support for one or more Laser Engine product lines. Support manufacturing initiatives and improvements of Laser Engine manufacturing processes Drive yield and cost improvements and support capacity increases Work on customer RMA events, providing robust containment and resolution and using an 8D report format Determine root cause and corrective actions to resolve manufacturing issues involving noncompliant product or material. Submit formal changes required for improvements or issue resolution, coordinating with other teams as needed Create and maintain detailed work instructions to support equipment operation and processes. Provide training to production staff on new or updated processes Assist forecasting capital equipment requirements in advance of need. Discuss technical issues with production techs & assemblers to help resolve issues or implement improvement actions Working with purchasing team and vendors on material issues or improvements and conducting first article inspection assessments. Education & Experience Minimum 5yr. experience in high-tech manufacturing environment BS/MS Optics, Optoelectronics, Physics or equivalent degree. Skills Hands-on experience with optical alignment, opto-mechanical assembly and test, including the use of optical and electrical photonics test equipment. Practical working knowledge of a variety of lasers, particularly solid state lasers, including safety, setup, operation and troubleshooting Strong background in procedure development, documentation and training tasks Proven record of process and fixture development for builds with exacting laser beam shaping and control requirements Strong practical experience manufacturing engineering support in high tech, low volume environment Broad understanding of optical, mechanical, and electronic engineering concepts. Ability to read and understand engineering drawings, interpret tolerances, define lean work flows and create value stream maps. Knowledge and understanding of design for manufacturability across a variety of manufacturing processes. Readily able to collate and analyze data and communicate technical and manufacturing information across a range of audiences Ability to set up and use statistical process control methods Understanding of Lean Manufacturing, 6σ, structured problem solving, Toyota PS, and Continuous Improvement methodologies. Strong self-starter with experience managing multiple projects with accountability and ownership. Experience working with vendors for component improvements and issue resolution Experience supporting off-shore or contract manufacturing partners and suppliers Ability to manage multiple projects with accountability and ownership Project management skills working within an NPI phase-gate product development processes. Experience in these areas will be advantageous: Automation for the builds of precision optical alignment systems Understanding of MRP planning systems and Bill of Material structures. Oracle expertise preferred. Understanding of MRP planning systems [RD1] and Bill of Material structures Experience with working in Quality Management Systems like IS09001 Electronics, basic circuit trouble shooting Oracle MPR system Statistical analysis software, i.e.: Minitab or JMP Programming skills, i.e.: LabView Computer Aided Design and 3D Printing Previous or current LSO (Laser Safety Officer) Working Conditions Mon-Fri on site Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Janicki Industries is an innovative, family-owned aerospace company located at the foot of the Cascades. We focus on engineering and manufacturing complex projects for companies in the aerospace, defense, and space industries. We are looking for a Manufacturing Engineer to join our growing team. This position is located on-site in Sedro Woolley, Washington State. POSITION DESCRIPTION Manufacturing Engineers are responsible for all activities that are carried out to successfully complete an assigned project. Activities may include interaction with customer and development of SOW, design work, schedule management, manufacturing process development, and manufacturing support. Ideal candidates would be eager to learn and work through complex engineering challenges in a collaborative environment. If you're an engineer with a strong work ethic, technical knowledge and enthusiasm for growth, this is the role for you. The following essential job functions are performed: Maintains an overview of production processes and facilities and work with Management and Production personnel to develop and implement improvements for optimal results Assists with creating and managing new production processes/procedures to better aid in the completion of composite tooling and/or resolve any problems that may have occurred during the production of the tool As Research and Design develops new technology, the ME reissues and/or reconstructs production processes in order to implement new technology Plans and coordinates standard manufacturing processes on the Production Floor Aides with recording test procedures and results, numerical and graphical data and recommendations for changes in product or test method Works with Project Managers to identify and mitigate risk in the production process Must be able to comply with Safety, 5S, AS9100 and Nadcap Standards and Practices Develops detailed Production Build Plan packages based upon customer process specifications and engineering drawings Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts Files, retrieves and maintains engineering drawings, records, revisions and updates, as needed Drafts detail drawings or sketches to convey technical information Maintains awareness of the project schedule for each project as it moves through the value stream in order to meet key project deadlines Analyzes and plans work force utilization, equipment and workspace requirements for maximum efficiency. Performs other duties as assigned Behavior: The incumbent must work well under pressure, meeting and completing multiple deadlines. The incumbent shall, at all times, demonstrate cooperative behavior with colleagues and supervisors Being at work on time and maintaining good attendance is a condition of employment and is an essential function of your job QUALIFICATIONS Due to our ITAR and EAR regulations, applicants must be a US Citizen or of Legal Permanent Resident Status as defined by 8 U.S.C. 1324b (a) (3). This position requires the ability to obtain a U.S. Secret Security Clearance (U.S. Citizenship Required). Janicki will assist with gaining this access once employed. Special Access Program or other Government Access Requirements are mandatory for this position and requires candidate agreed to enter a Continuous Evaluation program. EDUCATION/EXPERIENCE A Bachelor's Degree in Mechanical Engineering, Manufacturing Engineering/Engineering Technology, Industrial Design Technology, or a similar field is required Must be familiar with Microsoft Office products; some experience with Catia, NX Unigraphics, and SAP is desirable Must have effective verbal and written communication skills in the English language Must be familiar with a variety of the fields' concepts, practices and procedures Must be able to rely on extensive experience, problem-solving skills and judgment to plan and accomplish goals ADDITIONAL INFORMATION Salary range for this role is between $83,000 - $148,000, plus discretionary bonus, 401(k) matching, vacation, and health benefits. Employees can also receive additional pay for off-shifts. The range provided is Janicki's estimate of the base compensation for this role. Actual amount offered will be based on job-related and non-discriminatory factors such as experience, location, education, training, skills, and abilities BENEFITS Medical, dental, and vision insurance with employer contribution Disability insurance as well as Life/AD&D insurance HSA (Health Savings Account) with employer contribution and FSA (Flexible Savings Account) 401k with employer matching Paid time off and paid holidays (including two floating holidays) Education reimbursement program Several shift options Premium pay for off-shifts Not sure that you'll be the perfect fit for this role? You should still apply! We'll review your application for other opportunities. We are always on the lookout for talented people! Janicki Industries is an Equal Opportunity Employer. Janicki Industries does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, marital or familial status, physical or mental disability, genetic information, age, retaliation, veteran/military service status, or any other legally protected status. Janicki is proud to be a military friendly employer. Applicants or employees wishing to view a copy of Janicki Industries' Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at **************. As a federal government contractor and a recipient of federal funding, Janicki is required to abide by federal drug testing requirements (including preemployment drug testing for cannabis). Additionally, because of Janicki's work on aerospace products and the high volume of safety sensitive positions, Janicki takes the safety of its employees very seriously and requires that employees pass a preemployment drug test prior to starting employment.

About IEM Industrial Electric Mfg. (IEM) is the largest independent full-line manufacturer of custom power distribution systems in North America. Founded more than 75 years ago in Fremont, California, IEM grew alongside Silicon Valley and today operates over 1.7 million square feet of manufacturing capacity. With $1B+ in annual sales and 10,000+ commissioned projects across technology, data centers, commercial, energy, utilities, healthcare, industrial, and infrastructure markets, IEM continues to deliver exceptional product quality, dependable service, and the flexibility to meet complex technical requirements at scale. Position Summary The Codes & Standards Engineer position is responsible for ensuring that all IEM's electrical distribution products and plant and field services operations meet relevant industry standards, codes, and safety regulations. The role is responsible for compliance with relevant industry regulations for multiple electrical distribution product lines. The position will support IEM's expanding production campuses within the US and Canada. Key Responsibilities Provide guidance in the interpretation of technical language and requirements of various codes and standards (e.g., NEC, UL, CSA, ANSI/IEEE C37.20, etc.) Ensure IEM's products comply with relevant industry codes, standards, and regulations, and monitor changes that potentially impact products and/or operations. Collaborate with R&D, Product Engineering, and recognized NRTLs to ensure that new product designs are aligned with testing methods and certification requirements. Manage UL listing and certification processes including administrative review and maintenance of IEM's UL files. Coordinate with IEM Services, Sales, NRTL Inspectors, and customers for any on-site Field Inspections/Field Evaluations ensuring detailed and accurate record management. Analyze the impact of proposed changes to codes and standards on IEM's products or business and develop strategies to address regulatory challenges and opportunities. Develop training and educational materials related to codes and standards for internal and external teams as needed. Qualifications Minimum 2-year technical degree in electrical/mechanical engineering or related science field. Minimum 2-4 years' experience in the power distribution equipment or close-related industry. Detailed technical understanding of industry regulations relevant to electrical distribution products including UL1558. UL891, UL1008, UL67, IEEE C37.20, etc. Familiarity of product testing and certification processes (Electrical Manufacturing Industry knowledge preferred) Constructive problem solving to address key technical challenges Demonstrated success collaborating with multi-disciplinary teams. Highly effective written and verbal communication. Proficiency with Microsoft Office tools, especially Word and Excel. Strong organizational skills and attention to detail. Compensation The salary range for this role is $91,200 -$130,000 per year, based on location, experience, and qualifications. Location This position is available in multiple locations, including Vancouver (CAN), Tualatin (OR), and Jacksonville (FL) Why Join IEM At IEM, you'll join a team that powers some of the world's most ambitious projects. We're engineers, makers, and problem-solvers who thrive on tackling complex challenges and delivering solutions that keep industries moving forward. If you're driven, collaborative, and ready to make an impact, we'd love to hear from you. Your creativity and passion can help us achieve great things-come be part of the journey. Learn more about IEM at ********************* We offer comprehensive and competitive benefits package designed to support our employees' well-being, growth, and long-term success. View a snapshot of our benefits at *********************/careers Recruiting Scams Beware of recruiting scams. IEM never charges candidates fees, and all recruiter emails come from ************* address. If you suspect fraudulent activity, do not share personal information and report it to us at iemfg.com/contact Non-Discrimination Statement IEM does not discriminate against any applicant based on any characteristic protected by law. Privacy Information collected and processed as part of your IEM Careers profile, and any job applications you choose to submit is subject to IEM's Workforce Member Privacy Policy.

The future of aerospace and defense starts here. Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands. The Manufacturing Engineer will join the Operations Team group in leading development manufacturing efforts on next-generation products and systems in aerospace and defense. The ideal candidate will be passionate about process improvement and influencing product development. Hands-on experience in machining environments is a plus, including technical expertise in GD&T, programming, running 3/5 axis machines, welding, and fabrication. This is an in person role for a split shift position from 12pm-8pm M-F or 12pm-10pm M-Th Responsibilities: Run machines during second half of shift; collaborate with machinists to ensure quality, defect-free products Support manufacturing development efforts in multiple technical areas, Develop & coach manufacturing and process improvement principles in a collaborative role with the design engineering, quality, and build technicians Champion early development hardware to enable aggressive product schedules, including a hands-on role in first builds Support critical product needs including ERP maintenance, troubleshooting, and failure investigations Support strategic manufacturing efforts to optimize machine and shop performance Develop, publish, and maintain manufacturing and process specifications appropriate for product maturity and design phase of the program Preferred Qualifications and Relevant Experience: Bachelor's degree in Mechanical, Industrial, or Aerospace Engineering Hands-on experience with building things (engines, equipment, etc.) - through college teams or personal hobby Experience with Lean Manufacturing, Lean Transformation, Six Sigma, or Toyota Production Systems Hands-on experience in production manufacturing environments Experience with tool design, CAD (NX, Creo), programming and machining Colorado law requires us to tell you the base compensation range of this role, which is $88,000 - $110,000, determined by your education, experience, knowledge, skills, and abilities. The salary range for this role is intentionally wide as we are evaluating individuals based on their unique experience and abilities to fit our needs. Most importantly, we are excited to meet you and see if you are a great fit for our team. What we can't quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy. Benefits Include: (Please note, Interns are not eligible for benefits) Unlimited PTO - Vacation, Sick, Personal, and Bereavement Paid Parental and Adoptive Leave Medical, Dental and Vision Insurance Tax Advantage Accounts (HSA/FSA) Employer Paid Short and Long Term Disability, Basic Life, AD&D Additional Benefit Options Including Voluntary Life and Emergency Medical Transport EAP Program Retirement Savings Plan - 401k with Company Match Equity Grants in the Company How To Apply: Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants. NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role. US CITIZENSHIP, PERMANENT RESIDENCY, REFUGEE OR ASYLUM STATUS IS REQUIRED. Eligibility to obtain and maintain a U.S. Security Clearance. We're an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. No outside recruiters, please.

Nippon Sanso Matheson is a specialized gas equipment manufacturer for DUV, EUV, and purification systems for a variety of industries. The Manufacturing Engineer at Nippon Sanso Matheson will work with multiple disciplines to build, integrate, and test purification for toxic and non-toxic gases, and high- and low-pressure gas handling systems. This is an all-encompassing role to take designs through production and beyond. The ideal candidate will have hands-on experience with building mechanical structures, working in a team environment, and have good technical writing skills. Production * Responsible for program module builds, following all builds from sub-assembly to final assembly to meet delivery deadlines. * Develop, write, review, and implement manufacturing plans, production travelers and SOPs * Ensure the product meets all customer requirements and travelers capture all required data * Work directly with technicians and the production floor supervisors on product builds * Help train technicians on processes and procedures * Assist in the planning, development and implementation of manufacturing and quality activities Design * Review Designs and Design changes for manufacturing * Evaluate proposed designs for DfM, provide feedback to design team for manufacturability. Quality * Drive non-conformances into actionable work and system improvements * Assist in company-wide operational excellence projects and activities Procurement * Develop and maintain relationships with specialty manufacturers and service bureaus in our supply chain * Work with Procurement to meet the needs of inventory ordering and delivery * Track and manage open inventory orders to ensure production is on time * Manage inventory inspections and verification, and ensure products meet the requirements prior to being issued to the floor. Required Qualifications and Skills * Bachelor's degree in engineering, Engineering Technology or other science related fields * 1-4 years' experience * Good written and verbal communication skills * Must be eligible to work in the US * Working knowledge of ISO9001-2015, ISO14001 Desired Skills * Bachelor's degree- Engineering Discipline preferred * Experience with gas handling system fabrication and test * Experience with non-conformance resolution * Experience with manufacturing process development * Hands-on building * Working in a clean room environment * Working knowledge of ISO9001-2015, ISO-9001-IATF 16949, AS9100, ISO14001. * Supplier Quality Engineering background Salary $85,000-$120,000, exact salary to be determined by the education, experience level, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. Benefits * 401(k) Retirement savings plan * 401(k) Company matching & safe harbor contribution * Health insurance * Dental Insurance * Vision insurance * Health savings account & flexible spending account * 8 Company holidays per year * 3 Floater holidays per year. * Paid time off - 2 weeks' vacation and one week sick time * Paid Parental leave * Scholarship Program * Life Insurance * Disability insurance * Bereavement Leave * Employee Assistance Program * Additional benefits such as critical illness insurance, accident insurance, hospital indemnity insurance, legal insurance, pet insurance, and identity theft. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for long periods of time. The employee is occasionally required to stand, bend, reach, and walk. The position requires some physical effort. This would require the ability to lift or move objects up to 50 pounds. Duties will include working in a clean room environment and in environments exposed to chemicals. Nippon Sanso Matheson is a drug-free workplace and an Equal Employment Opportunity (EEO)/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, veteran status or any other protected factor. Nippon Sanso Matheson is committed to providing access, equal opportunity and reasonable accommodations for individuals with disabilities in employment, its services, programs, and activities Job Type: Full-time Pay: $85,000.00 - $120,000.00 per year Experience: * Manufacturing engineering: 2 years (Preferred) Shift availability: * Day Shift (Preferred) * In office position. Ability to Commute to Longmont, CO.

About Helion We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: You will design, implement, and optimize the production process for in-house capacitors. This is a unique opportunity to collaborate with other teams (Supply Chain, Production, Engineering, Test Operations), directly influence the commissioning timeline for Helion's first power plant, and lay the groundwork for Helion's transition to generator mass-manufacturing. This is an onsite role that reports to the Director of Capacitor Manufacturing at our Everett, WA office. You Will: Design and implement rate-based assembly processes with support from Production and Engineering Manage interdisciplinary projects to increase rate and throughput of capacitor line (e.g., floor layout, tooling, build cells, large-scale equipment) Help develop new business processes such as non-conformance management, process control, process safety, and asset maintenance to grow production line and build the foundation for high-volume production Gather data (labor hours, cycle times, fallout) to identify production bottlenecks, and propose and deploy solutions (design changes, process changes, equipment, automation) Identify high return-on-investment capabilities, including capital equipment and software capabilities that improve manufacturing processes, partnering with Production, Finance, Operations, and Facilities teams Collaborate on development of future processes in parallel with supporting and enabling higher output on current production line Required Skills: 5+ years of technical work experience that includes development and improvement of production systems Hands-on engineering or manufacturing experience in rate-based and high-volume manufacturing Experience communicating with and influencing partners across organizational lines Experience in cradle-to-grave ownership of complex engineering or production scopes #LI-Onsite #LI-SA1 Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $138,000 - $182,000 USD Benefits Our total compensation package includes benefits, including but not limited to: • Medical, Dental, and Vision plans for employees and their families • 31 Days of PTO (21 vacation days and 10 sick days) • 10 Paid holidays, plus company-wide winter break • Up to 5% employer 401(k) match • Short term disability, long term disability, and life insurance • Paid parental leave and support (up to 16 weeks) • Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

Ascentec Engineering is hiring! We are seeking a Manufacturing Strategy Engineer who will develop manufacturing strategies, systems, and continuous improvement processes to support production build success. The contemplated strategies will result in high- quality products being built within budgeted parameters. This role will also develop sustainable improvements through engagement using a team-based approach and continuous improvement toolsets. The selected candidate exercises independent judgment to adjust priorities, goals, work assignments, methods, procedures, and techniques for successful project facilitation. This position is on-site at our Tualatin, Oregon location (not remote/not hybrid) and is not eligible for Visa sponsorship. Requirements Job Responsibilities: · Evaluates and develops engineering plans or work orders to fabricate work aids, fixtures, or other items to assist production in cost reductions for continuous improvement. · Assists in developing key performance indicators (KPI's) to establish baseline performance metrics on key processes required to assess the impact of change. · Supports engineering projects by preparing detailed designs from concept designs and written specifications, ensuring manufacturability. · Confers with outside firms and other staff to resolve manufacturing problems. · Leads continuous improvement initiatives to reduce bottom-line costs in material usage, ergonomic hazards, and labor requirements. · Improves manufacturing efficiency by actively searching for opportunities to improve data quality, delivery/presentation, and facility manufacturing practices. · Establishes processes to share process improvements between business locations. · Benchmarks key processes to facilitate best practices. · Coordinates and develops communications to publish change results and share improvements amongst the various business locations. · Other duties as assigned. Supervisory Responsibility: · Responsible for leading group activities with participants from all areas and titles across the company. A key leadership component will be to drive participation and commitment from non-direct reports throughout the business. Education: · Bachelor's degree (or higher) in Manufacturing, Mechanical Engineering, or related engineering field is required Experience: · Minimum five years of experience in a manufacturing production environment (if you have a Bachelor's degree or higher referenced above), with increasing responsibilities. Seven years of experience if you do not have the above-referenced Bachelor's degree (or higher). Knowledge, Skills & Abilities: · Excellent interpersonal and communication skills, both oral and written, for continuous interaction with all departments, employee levels, and external customers · Proficient in using PC software, including engineering applications for analysis, design, CAD/CAM, and data programs. Proficiency with AutoCAD, and Microsoft Office suite with advanced Excel skills. · Highly organized and detail-oriented, with a strong customer service orientation (both internal and external), and the ability to work independently. · Experience reading and comprehending work specifications, work orders, blueprints, contracts, and technical publications. · Demonstrated understanding and experience in Materials Requirement Planning Systems, and in deploying Lean, Six Sigma, or other Continuous Improvement methodologies. · Proven experience in effectively leading and managing diverse teams. · Strong ability to facilitate process improvement events efficiently and effectively. · Knowledgeable about working with carbon and stainless steels, aluminum, and other tough materials. · Experience running continuous improvement projects that involve asset acquisition, revitalization, and return on investment justifications. · Skilled in performing costing activities for capital justification, business case analysis, and general costing tasks. · Ability to manage competing priorities and deadlines effectively, while being responsive to last-minute, high-priority, time-sensitive projects. Working Environment: · Work will be performed in a dynamic, fast-paced office setting with moderate noise levels from production activity. Safety glasses provided for when in the shop. Hearing protection may be required. The selected candidate required to lift up to 20 pounds. · The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. The employer retains the right to change or assign other duties to this position. Compensation / Benefits: • $90,000 to $110,000 per year DOE • Medical / Dental / Vision • 401k with company match up to 4% • Tiered Quarterly Bonus Program • Short-term and Long-term Disability Insurance • Tuition Reimbursement • Life Insurance • Paid time off / paid holidays • Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $90,000 to $110,000 DOE

at Samtec, Inc Samtec is seeking an Optics Product Manufacturing Engineer for our Colorado Springs, CO location. This is a Monday through Friday day shift position. Salary is $110 - $150 per year inclusive of applicable bonus(s) and commensurate with experience. Standard benefit offerings available are medical (HSA/PPO) dental, vision, group life, AD&D, short and long term disability, EAP, 401K plus other voluntary options, as well as paid time off.The Optics Product Manufacturing Engineer will collaborate with a broad cross-functional team to transition product designs through validation and into production through phase gate processes. The system engineer becomes the resident expert for released products, coordinating product improvements and sustainment with a cross-functional team. The successful candidate will be expected to be an effective hands-on contributor in the optics engineering team to determine and solve highly technical material and process challenges in the product lifecycle. Essential Functions/ Responsibilities: Contribute to product development through Design For Manufacturing and Design For Test Join product development team at the Alpha to Beta transition to ensure design is well-documented and has sufficient margin for performance validation, reliability qualification, production ramp, and manufacturing yield Collaborate with Process Engineering teams to develop and Implement control plans and manufacturing tests to ensure production satisfies market needs Partner with production and supply chain teams to transition designs into scalable manufacturing processes, ensuring compliance with industry standards Own design integrity for product after transition from Beta to production. Maintain the set of product requirements and design artifacts and coordinate engineering change management post product release. Troubleshoot and resolve technical challenges related to optoelectronic performance. Track engineering orders through product development lifecycle to ensure delivery of new optoelectronic products on schedule and within cost targets “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience and Skills 5+ Year's experience in a relevant engineering environment with experience in taking designs to manufacturing. Expertise in product lifecycle management processes and tools, including requirements definition and management Deep technical expertise in: Optoelectronic design, including optical components, semiconductor devices. Industry standard manufacturing and assembly processes, such as PCB manufacturing (plating, solder mask, SMT), epoxy dispense and cure, wirebonding, etc, their operation and common failure modes. Data interpretation of common FA and reliability methods including but not limited to microscopy (Optical, Acoustic, Electron), HTHH, Thermal cycling, shock and vibration. Strong team player able to engage and influence teams from design to operations, contribute to NPD projects to release and address quality/yield issues as they arise. Must have excellent communication, collaboration, and organizational skills and the ability to work effectively with different levels and individuals inside and outside of the organization. Demonstratable reasoning skills. Hands-on problem solving with experience in the use of FMEA, SPC, DOE, phase gate processes. Experience working in a cleanroom, particularly with ESD sensitive components. Working knowledge of mechanical design, interpretation of drawings, CTQ and tolerance analysis (GD&T). Must be able to handle multiple projects simultaneously as priorities can change quickly. Education: Bachelor's degree in Mechanical Engineering, Electrical Engineering, Materials Engineering, Physics or a related field is required. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Digital Print Manufacturing Engineer Onsite, based in Seattle, WA RPI, a global leader in print-on demand, is looking for a highly motivated Digital Print Manufacturing Engineer to lead process development and optimization across our digital print production environment. This role requires expertise in digital printing technologies, pre-press workflows, and print production validation. The ideal candidate will drive quality, efficiency, and innovation in a fast-paced, high-volume digital print setting. Key Responsibilities Collaborate with design, prepress, and operations teams to ensure seamless end-to-end production. Review proposed project scopes and provide input to optimize manufacturing efficiency. Develop, draft, and implement comprehensive test plans based on project scope, requirements, and objectives to ensure accurate validation and quality outcomes. Develop and execute validation protocols for new digital print products, processes, substrates, and equipment. Conduct print trials, performance testing, and documentation to ensure production readiness and compliance. Partner with quality and regulatory teams to maintain validation standards. Monitor print output for defects and inconsistencies; assist in root cause analysis and corrective actions. Help maintain an accurate database for all SOPs, and ensure documentation of materials testing, pre-press changes, and work instructions Maintain and update an accurate database of Standard Operating Procedures (SOPs), ensuring thorough documentation of materials testing, pre-press adjustments, and work instructions to support production consistency and compliance Assist and conduct hands-on training sessions for operators on digital print best practices, ensuring adherence to quality standards, operational efficiency, and equipment safety Qualifications 3+ years of experience in digital print manufacturing, with strong exposure to pre-press and production validation. Experience with digital print platforms such as HP Indigo, Xerox, Canon, or similar. Understanding of lean manufacturing, Six Sigma, or other process improvement methodologies. Excellent analytical, documentation, and communication skills. Self-driven and motivated, with the ability to work independently and take initiative Strong team player who thrives in collaborative environments Demonstrates ownership of tasks and a proactive approach to problem-solving Demonstrates flexibility and willingness to travel to other company locations as required to support operational needs and cross-site collaboration Preferred Skills Experience with web-to-print workflows. Knowledge of RIP software (e.g., HP, Fiery, etc), Adobe Creative Suite, and color management Familiarity with automation tools and digital press APIs. Experience with Rotary Die Cutting, Guillotine, and Book Binding equipment Knowledge of substrate behavior and ink interaction in digital environments. Project management experience in a digital print or commercial print setting. About RPI: RPI Print, headquartered in Seattle, WA, is dedicated to making brands successful through personalized print solutions. With facilities and partners worldwide, RPI offers end-to-end integrated supply chain services for digital printing on demand. Our commitment goes beyond printing; we prioritize building lasting relationships with our customers. If you believe you're a good fit for this role and share our passion for excellence, we'd love to hear from you! At RPI, we recognize the strength in diversity and strongly encourage candidates from diverse backgrounds to apply. We are committed to equal opportunity and consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, marital status, protected veteran status, disability status, or other applicable legally protected characteristics. RPI is dedicated to providing equal employment opportunities and will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990. Please note that the job description may be periodically reviewed as duties and responsibilities evolve with business needs. Essential and other job functions are subject to modification, and reasonable accommodation may be provided to enable individuals with disabilities to perform essential functions.

Skills Inc., one of Washington State's largest aerospace suppliers offers world-class, competitively-priced products and services which exceed customer's requirements for rigorous standards and excellence. We are a fully integrated, self-funded non-profit with a social mission to train, employ and serve persons with disabilities and our community. JOB SUMMARY As part of our recent growth, we are seeking an experienced Manufacturing Engineer to join our team. The ideal candidate will develop and improve manufacturing processes by studying and implementing production, manufacturing and finish methods. ESSENTIAL DUTIES AND RESPONSIBILITIES • Evaluate manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling and materials. • Develop manufacturing processes by studying product requirements. • Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. • Provide manufacturing decision-making information by calculating production, labor and material costs; reviewing production schedules and estimating future requirements. • Use process steps to define and call out reasonable set up and run times. • Write operator work instructions and inspection documents to ensure compliance with product, process and system requirements. • Accurately interpret aerospace manufacturing drawings, specifications and engineering requirements. Provide technical support and training to coworkers, customers, and suppliers. • Write mistake-proof work instructions and manufacturing processes to ensure compliance with product, process and system requirements; reduce variation and improve repeatability. • Refine and enhance products and processes by applying continuous improvement and lean manufacturing principles and techniques. • Provide technical support and training to coworkers, customers, and suppliers. • Ensure compliance with all federal, state, company and customer requirements. • Act as primary point of contact for supplier inquires, product and process conformance decisions, and process improvement activities. • Develop constructive and cooperative working relationships with others and maintain them over time. • Identify opportunities for process improvement and increased efficiency. PREFERRED QUALIFICATIONS • Thorough knowledge of aerospace manufacturing drawings, specifications and engineering requirements. • Ability to write clear, accurate, comprehensive and concise documents, formatted to increase information accessibility and grammatically correct. • Ability to lead cross-functional teams and experienced in developing win-win relationships with coworkers, customers, suppliers, and auditors. • Experience with the fabrication, assembly, application of protective finishes, and inspection of structural aerospace products. Catia v5 experience a plus. • Thorough knowledge of AS9100 quality system requirements. Familiarity of Nadcap requirements a plus. • Solution orientated, able to define problems, collect data, establish facts and draw valid conclusions to solve a wide range of difficult problems in practice and cost effective ways. • Proficient with Microsoft Word and Excel. • Accepting of criticism and ability to deal calmly and effectively with stressful situations. • Willingness to take on responsibilities and challenges. • Ability to identify, organize, estimate and recognize differences or similarities. • Ability to deal with a wide variety of personalities and communication styles. • Ability to provide direction and guidance. LANGUAGE SKILLS • Ability to read, write, communicate and/or follow written and verbal instructions in English. • Ability to communicate in English through voice, or American Sign Language or adaptive technology. CONFIDENTIALITY The responsibilities of this position may require an individual to access and hold in confidence certain information. This means that information and/or documentation acquired about employees, suppliers, customers, business practices, and all other related information remains confidential. PREFERRED EDUCATION/EXPERIENCE • High school diploma or equivalent. • Five (5) years Aerospace experience. • Three to five (3-5) years Aerospace Manufacturing Engineer Planning experience. ITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. A "US Person" can be a US citizen; a lawful permanent legal resident or an individual who has been admitted as a refugee or asylee. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment described here are representative of those that must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Constant reaching, non-forceful grasping and fine manipulation. • Frequent exposure to an indoor manufacturing environment with a moderate noise level. • Frequent lifting and moving up to 10 lbs. • Frequent sitting while working at a computer work station. • Frequent standing and walking. • Occasional exposure to fumes and airborne particles. • Occasional lifting and moving up to 25 lbs. Definitions: Constant (5-8 hrs. /shift) Frequent (2-5 hrs. /shift) Occasional (Up to 2 hrs. /shift) SHIFT ASSIGNMENT 1st Shift; Monday-Friday 7am-3:30pm TOTAL REWARDS SUMMARY At Skills Inc., our most important partnership is the one we share with our employees. We are dedicated to supporting the health and well-being of our employees and their dependents, which is why we offer a comprehensive and valuable benefits package that includes medical, dental, vision, life and AD&D insurance, paid time off and a 401(k) savings plan to eligible employees. SALARY DESCRIPTION Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Skills Inc. is a self-supporting Social Enterprise and is organized as a 501 (c) (3) non-profit. We have three lines of business; Aerospace Manufacturing, Aerospace Finishing, and Business Solutions, that operate in 2 locations. Skills Inc. employs over 250 people and our social mission is to train, employ and serve persons with disabilities. We accomplish our mission three ways; direct hire, vocational programs and services, and as a resource to the community. Salary Range: $27.00-$42.00 BENEFITS SUMMARY Paid Vacation* Paid Sick 401(k) with a percentage company-match contribution* Paid holidays*- prorated based on shift Medical, dental, vision and life insurance* Employee Assistance Plan EEO and ADA STATEMENT Skills Inc. is committed to cultivating a culture of diversity, equity, and inclusion. We invite employees, participants in our services, vendors, and customers to bring their authentic selves to every interaction. We strive to represent the communities in which we serve. We aspire to see and value people across the spectrums of age, ability, gender, race, sexual orientation, perspectives, and other visible and invisible differences. Skills Inc. embraces equitable practices at the center of our daily work and believe our organization is stronger for it. Skills Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required. New responsibilities, activities and duties may be modified or added at any time by a member of the management team. 1st Shift; Monday-Friday 7am-3:30pm

Skills Inc., one of Washington State's largest aerospace suppliers offers world-class, competitively-priced products and services which exceed customer's requirements for rigorous standards and excellence. We are a fully integrated, self-funded non-profit with a social mission to train, employ and serve persons with disabilities and our community. JOB SUMMARY As part of our recent growth, we are seeking an experienced Manufacturing Engineer to join our team. The ideal candidate will develop and improve manufacturing processes by studying and implementing production, manufacturing and finish methods. ESSENTIAL DUTIES AND RESPONSIBILITIES * Evaluate manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling and materials. * Develop manufacturing processes by studying product requirements. * Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. * Provide manufacturing decision-making information by calculating production, labor and material costs; reviewing production schedules and estimating future requirements. * Use process steps to define and call out reasonable set up and run times. * Write operator work instructions and inspection documents to ensure compliance with product, process and system requirements. * Accurately interpret aerospace manufacturing drawings, specifications and engineering requirements. Provide technical support and training to coworkers, customers, and suppliers. * Write mistake-proof work instructions and manufacturing processes to ensure compliance with product, process and system requirements; reduce variation and improve repeatability. * Refine and enhance products and processes by applying continuous improvement and lean manufacturing principles and techniques. * Provide technical support and training to coworkers, customers, and suppliers. * Ensure compliance with all federal, state, company and customer requirements. * Act as primary point of contact for supplier inquires, product and process conformance decisions, and process improvement activities. * Develop constructive and cooperative working relationships with others and maintain them over time. * Identify opportunities for process improvement and increased efficiency. PREFERRED QUALIFICATIONS * Thorough knowledge of aerospace manufacturing drawings, specifications and engineering requirements. * Ability to write clear, accurate, comprehensive and concise documents, formatted to increase information accessibility and grammatically correct. * Ability to lead cross-functional teams and experienced in developing win-win relationships with coworkers, customers, suppliers, and auditors. * Experience with the fabrication, assembly, application of protective finishes, and inspection of structural aerospace products. Catia v5 experience a plus. * Thorough knowledge of AS9100 quality system requirements. Familiarity of Nadcap requirements a plus. * Solution orientated, able to define problems, collect data, establish facts and draw valid conclusions to solve a wide range of difficult problems in practice and cost effective ways. * Proficient with Microsoft Word and Excel. * Accepting of criticism and ability to deal calmly and effectively with stressful situations. * Willingness to take on responsibilities and challenges. * Ability to identify, organize, estimate and recognize differences or similarities. * Ability to deal with a wide variety of personalities and communication styles. * Ability to provide direction and guidance. LANGUAGE SKILLS * Ability to read, write, communicate and/or follow written and verbal instructions in English. * Ability to communicate in English through voice, or American Sign Language or adaptive technology. CONFIDENTIALITY The responsibilities of this position may require an individual to access and hold in confidence certain information. This means that information and/or documentation acquired about employees, suppliers, customers, business practices, and all other related information remains confidential. PREFERRED EDUCATION/EXPERIENCE * High school diploma or equivalent. * Five (5) years Aerospace experience. * Three to five (3-5) years Aerospace Manufacturing Engineer Planning experience. ITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. A "US Person" can be a US citizen; a lawful permanent legal resident or an individual who has been admitted as a refugee or asylee. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment described here are representative of those that must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Constant reaching, non-forceful grasping and fine manipulation. * Frequent exposure to an indoor manufacturing environment with a moderate noise level. * Frequent lifting and moving up to 10 lbs. * Frequent sitting while working at a computer work station. * Frequent standing and walking. * Occasional exposure to fumes and airborne particles. * Occasional lifting and moving up to 25 lbs. Definitions: Constant (5-8 hrs. /shift) Frequent (2-5 hrs. /shift) Occasional (Up to 2 hrs. /shift) SHIFT ASSIGNMENT 1st Shift; Monday-Friday 7am-3:30pm TOTAL REWARDS SUMMARY At Skills Inc., our most important partnership is the one we share with our employees. We are dedicated to supporting the health and well-being of our employees and their dependents, which is why we offer a comprehensive and valuable benefits package that includes medical, dental, vision, life and AD&D insurance, paid time off and a 401(k) savings plan to eligible employees. SALARY DESCRIPTION Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Skills Inc. is a self-supporting Social Enterprise and is organized as a 501 (c) (3) non-profit. We have three lines of business; Aerospace Manufacturing, Aerospace Finishing, and Business Solutions, that operate in 2 locations. Skills Inc. employs over 250 people and our social mission is to train, employ and serve persons with disabilities. We accomplish our mission three ways; direct hire, vocational programs and services, and as a resource to the community. Salary Range: $27.00-$42.00 BENEFITS SUMMARY * Paid Vacation* * Paid Sick * 401(k) with a percentage company-match contribution* * Paid holidays*- prorated based on shift * Medical, dental, vision and life insurance* * Employee Assistance Plan EEO and ADA STATEMENT Skills Inc. is committed to cultivating a culture of diversity, equity, and inclusion. We invite employees, participants in our services, vendors, and customers to bring their authentic selves to every interaction. We strive to represent the communities in which we serve. We aspire to see and value people across the spectrums of age, ability, gender, race, sexual orientation, perspectives, and other visible and invisible differences. Skills Inc. embraces equitable practices at the center of our daily work and believe our organization is stronger for it. Skills Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required. New responsibilities, activities and duties may be modified or added at any time by a member of the management team. 1st Shift; Monday-Friday 7am-3:30pm

The Manufacturing Engineer is responsible for designing, improving, and integrating manufacturing systems, equipment, and processes to support production efficiency, product quality, and cost reduction. This role works cross-functionally to support New Product Introduction, troubleshoot production issues, and ensure manufacturability of new designs and processes. Essential Duties and responsibilities Study, analyze and design methods, procedures, processes, layouts, fixtures and tooling to support process efficiency and product quality. Identify and recommend resolutions for existing or imminent manufacturing problems, equipment failures, or safety issues. Recommend cost reduction initiatives and manufacturing process improvements. Participate in the review and evaluation of product design changes. Participate in customer-facing meetings to provide engineering updates and manage technical expectations. Coordinate with support groups to ensure manufacturability; process capabilities and capacities are developed to support new products. Develop, monitor and report on project schedules and establish Standard Operating Procedures for new and updated manufacturing equipment and systems. Collaborate with quality, production, and engineering teams to troubleshoot production and equipment issues. Lead root cause analysis and implement corrective actions for recurring issues. Develop manufacturing instructions or procedures and train assemblers and operators in machine operations, processes or assembly applications. Responsible for following all Vaupell policies and standard operating procedures and safety practices. Other duties as assigned. Job Qualifications/Requirements Bachelor's degree in engineering with 5 + years of thermoplastic or composites related manufacturing engineering experience. Other nonmetallic experience is a plus. Demonstrated experience working within highly regulated manufacturing environments (e.g., FDA, FAA, ITAR, or ISO 13485/AS9100). Aerospace industry experience preferred. Proficiency in interpreting and executing to industry-specific standards, including ASTM and SPI guidelines. Strong competence in Non-Conformance Reporting (NCR) and the MRB (Materials Review Board) process, with the ability to provide technical dispositions and develop validated rework procedures for complex components. Requires knowledge of design techniques, tools and principals involved in production of precision technical plans blueprints, drawings and 3-D models. Experience initiating and implementing continuous improvement initiatives using Lean and Six Sigma tools required. CAD (CATIA) proficiency is a plus. Candidate must be comfortable working hands-on on the manufacturing floor. Ability to read, speak, understand and follow instructions in English. Must be able to wear and properly use the required personal protective equipment. Candidates must be a “US Person” (i.e. US Citizen or Permanent Resident) to ensure Vaupell's compliance with ITAR (International Traffic in Arms Regulations) and EAR (Export Administration Regulations) Environmental Condition While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to fumes, airborne particles, and vibrations. The noise level in the work environment is usually moderate to occasionally loud. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements Required physical skills and abilities (see below) A = 20% or less of work time B= 20 to 60% of work time C = 60% or more of work time Blank = Not applicable Standing C Bending at waist A Walking C Reaching below shoulder level A Sitting C Reaching above shoulder level A Lifting under 25 lbs. A Grasping C Lifting 25 to 50 lbs. A Handling C Lifting over 50 lbs. A Finger Dexterity C Carrying under 25 lbs. A Feeling C Carrying 25 to 50 lbs. A Eye-Hand coordination C Carrying over 50 lbs. A Eye-Hand-Foot coordination A Pushing under 25 lbs. A Hearing, ordinary C Pushing 25 to 50 lbs. A Hearing, other (explain below) Pushing over 50 lbs. A Seeing - near vision acuity C Climbing stairs A Seeing - far vision acuity C Climbing ladders A Depth perception C Balancing A Color perception C Kneeling A Keyboarding C Crawling A Pulling C Turning/twisting A Other Vaupell reserves the right to change, modify or add to the Essential Duties and Responsibilities of any position at any time. Vaupell is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, belief and spirituality, gender, age, sexual orientation, gender identity or expression, ethnicity/national origin, pregnancy, genetic information, veteran or disability status.

Full-time Description XYBIX SYSTEMS, a leading innovative ergonomic furniture manufacturer in Littleton, CO is searching for a Manufacturing Engineer to join their existing team! We manufacture customized sit-stand furniture for 911 dispatch centers, medical centers, public utilities, security applications, call centers, and more ! All our products have fitness, health, and comfort designed into them for people in these fields. If you enjoy working on a high performing team, love collaboration and a team environment - then you could be a great ‘fit' with our company! We are hiring a Manufacturing Engineer to process daily work and assist with the design of new products from concept through production to improve all facets within the value stream. Our Manufacturing Engineer must be able to work in a team environment, provide innovative solutions and bring to life the next ‘big' thing in health and productivity in the workplace. Xybix Systems offers competitive pay, benefits, and a coaching/supportive, relationship-based environment that values employees, develops their strengths and focuses on development, opportunity and work with a purpose! THIS IS AN ONSITE POSITION! COLORADO RESIDENCY AND IN-OFFICE ATTENDANCE ARE REQUIRED!! RESPONSIBILITIES will include but not be limited to: Design and update new and existing product line. Utilize Inventor/Auto CAD to create product drawings. Generate CNC programs and organize output files. Convert quotes and sales orders to manufacturing jobs. Maintain and organize current orders by identifying priority requirements. Generate engineering reports, as required. Create routings and bill of materials. Communicate with internal departments to clarify engineering questions. Create instructions for customers and clients for installation and manufacturing. Provide document control management. Requirements QUALIFICATIONS to be successful: Bachelor's degree in Mechanical or Manufacturing Engineering required (or related field). Minimum of 2 years' experience utilizing 2D/3D CAD. Engineering related experience in a manufacturing environment (course work and/or internships will be considered).? Working knowledge of CNC programming (RouterCIM, project nesting) and CNC machines. Millwork design and multi-material fabrication experience preferred. Working knowledge of bill of material structuring and ECO processes. Working knowledge of ERP software and proficiency with Microsoft Office applications. LEAN training and/or certification preferred. Excellent teamwork, communications skills, and efficiency with time management. BENEFITS: Paid time off, holiday pay. 100% paid employee health insurance. Family coverage available. Dental and Vision insurance available. 401k with 4% company match after 1000 hours and a year of service. Long term disability and employee life insurance. Discretionary annual performance bonuses. Career advancement options! POSITION STATUS: Full-time, Exempt. SALARY RANGE: $70,000 - $80,000 annually SCHEDULE: Our team works a 9/80 schedule allowing you to have every other Friday off. Application Deadline This position is expected to stay open until January 23, 2026. Please submit your application as soon as possible and no later than January 23, 2026 at 11:59PM to ensure consideration. EEO Statement: Xybix Systems does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors. Reasonable Accommodation Statement: If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. Applicants with disabilities may contact Xybix HR via email, telephone, or other means to request and arrange accommodation. If you require assistance to accommodate a disability, you may request accommodation at any time.

Description: Custom Interconnects (a Qnnect company) is seeking talented team players in our Centennial, CO facility who are committed to pushing the boundaries of interconnect technology performance and innovation. Join us and connect your career to the future. We offer a unique high-tech manufacturing environment including flexible work hours, overtime opportunities, small family-like atmosphere, clean and safety-focused with growth opportunities, specializing in passive signal connectors (interposers). If you love precision work and have the dexterity to handle parts smaller than a grain of rice, this role is for you! Summary The Tooling and Manufacturing Engineer (Micro-Assembly) will require CNC operation, PLC programming, assembly, and quality control experience for success in this role. You'll program proprietary equipment to manufacture custom interconnect products and extremely small, high-precision components requiring steady hands, attention to detail, and expertise in micro-engineering processes. Key Responsibilities · Set up and operate proprietary equipment to manufacture parts that meet engineering specifications. · Program and troubleshoot PLC-controlled systems. · Assemble and inspect components and subassemblies, ensuring precise fit and functionality. · Perform in-process and final inspections using precision tools and microscopes, adjusting as needed, while maintaining applicable documentation. · Maintain equipment, ensuring minimal machine downtime and machine optimization. · Provide accurate and timely production and quality logs, machine records, programming changes and quality control findings. · Identify and support continuous improvement initiatives. · Other duties as assigned. Qualifications & Requirements · High school diploma or GED equivalent required. · Technical degree or certification in CNC machining, PLC programming, or related fields preferred. · Minimum of 3 years of experience operating CNC machines and programming PLC systems required. · Experience in assembly and quality control processes in a manufacturing environment required. · Tool grinding experience preferred. · Proficiency in machine operation, setup, and troubleshooting. · Familiarity with reading and interpreting technical drawings, blueprints, and schematics. · Ability to use precision measuring tools such as calipers, micrometers, and height gauges and microscope. · Strong attention to detail with a focus on quality and precision. · Excellent problem-solving skills and ability to work under pressure. · Excellent dexterity to work with extremely small parts. · Ability to work independently and as part of a team. · Strong communication skills, both verbal and written. · Knowledge of safety protocols and practices in a manufacturing environment. Physical Requirements · Ability to lift up to 20 pounds. · Ability to sit for long periods, bend, and reach. · Must be able to work in a manufacturing environment with exposure to machinery, noise, and other physical demands. · Ability to work effectively using a microscope for long periods of time. Benefits • Healthcare benefits • Fully paid life insurance • Health Savings Account with company contribution • 401(k) employer match • Paid Vacation and Paid Holidays • Growth and Development Opportunities • Positive culture of diversity, equity, and inclusion Qnnect and its affiliated companies are affirmative action/equal opportunity employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements: