Norgren jobs in Plymouth, MN

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

K&K Global Talent Solutions Inc is an International recruiting agency that has been providing technical resources in the USA region since 1993. This position is with one of our clients in The USA, who is actively hiring candidates to expand their teams. Role: Salesforce technical delivery manager Employment type: Contract Technology: Salesforce, Apex Location: Hybrid (Minneapolis, MN) Job Description- Provide technical expertise and leadership to a team dedicated to Salesforce technologies design and build activities . Ensure activities are completed, validated, aligned with architectural objectives and requirements, and successfully deployed into the production environment. Provide mentorship to the team ensuring optimization of designs/solutions. Champion standard processes and procedures. Provide troubleshooting for development and test environment issues. Key Responsibilities Provide technical expertise and leadership to a team of highly technical employees. Develop and maintain a high performing team through effective hiring, vendor partner management, coaching and performance management. Foster a collaborative, success-oriented team environment where resources are empowered and accountable. Provide work direction, delegation, and prioritization to team. Ensure compliance with company's policies, processes and procedures. Work in partnership with leadership and team members (vendors/contractors and direct reports as applicable) to deliver robust technical solutions, ensuring that service level commitments and project timelines are maintained. Ensure successful project design, configuration, performance, implementation and outstanding service delivery. Oversee the technical correctness and completeness of artifacts/documentation associated with engineering designs; pro-actively identify and resolve issues/problems. Verify that build activities are complete per the approved engineering diagrams. Redirect build activities as necessary. Oversee the hand-off of design solutions and confirm testing and validation are executed prior to the final release of new and upgraded technologies. Influence the continuous improvement of processes, policies and best practices to optimize performance and availability of technologies. Drive and develop consistent technical build, implementation and support processes. Verify designs are validated and adhere to defined standards. Ensure ongoing improvements align with standard process/service management principles and technology Systems Development Life Cycle (SDLC) methods. Evaluate, troubleshoot and participate in root-cause analysis of development and test environment issues within technical area of expertise. Once corrective action is identified, lead respective team to implement changes/improvements in designs/builds as necessary to prevent recurrence. Define, track and measure overall department performance and metrics. Complete and distribute reports, models, status updates, statistics, etc., to technology leadership as required. Provide proper escalation to leadership for issues/problems as necessary. Participate in the organization's strategic and financial planning process. Continuously develop specialized knowledge and technical subject matter expertise by remaining apprised of industry trends, the direction of emerging technologies, and their potential value to the business. Effectively present the value proposition of business appropriate emerging technologies to technology leadership. Required Qualifications Bachelor's degree in Computer Science, Engineering, related field, or equivalent relevant work experience. 8+ years of experience of progressive scope/impact/responsibility (including both hands-on and leadership roles) working with technologies. Proven track record for delivering varying initiatives and driving execution. Demonstrated experience and success in influencing, leading, and coaching without direct leadership responsibility. Demonstrated reasoning and troubleshooting skills. Demonstrated in-depth and hands-on experience working with salesforce platform on configuration, customization (Lightning Components, Apex, Visualforce, SOQL, etc.), integration, security, administration and other core features. Defined and delivered scalable technical solution architecture and integrated solution involving Salesforce clouds, preferably Financial Cloud. Demonstrated an understanding of integrations with third party systems through a variety of integration patterns (ESB, Pub/Sub, Point to Point, Batch, Singleton, etc.) and Salesforce capabilities (Soap, Rest, Platform Events, Streaming APIs, etc.). Preferred Qualifications Proven ability to communicate and articulate technical information across various organizational levels. Experience working in geo-dispersed team environments. Ability to negotiate or persuade others in moderately complex situations Note: Applicants for employment in The USA should possess work authorization which does not require sponsorship by the employer for a visa

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Experienced Journeyman Excellent Benefit Package Shift: Monday through Friday 7am-3:30pm with Overtime possible Hourly Rate: 25.00 to 30.00 per hour depending on experience Requirements: You must be 18 years old. For safety reasons, you must be able to speak English or Spanish A pre-employment drug screen (Excluding THC) and criminal background check are required. Able to lift up to 30lbs. Willing to climb ladders up to 80 feet Valid Driver's License (Preferred) Job Duties: As you might expect, cleaning is at the heart of what your job will entail. For the most part, you'll be: Cleaning Windows - High Rise Power washing High bay dusting Gutter cleaning Why Join the Marsden Family? Final Touch Window Cleaning, is a Marsden Holding Company, is a facility services provider with an unmatched reputation for operational excellence. We clean, sanitize, and service large and small businesses across the United States. Room to Grow Jobs are Classified as Essential Flexible Work Schedule DailyPay: access your pay when you need it AAP/EEO Statement Marsden is an Equal Opportunity Employer. Marsden does not discriminate against any employee or applicant for employment due to race, age, sex, creed, ancestry, disability, sexual or affectional orientation, marital, or veteran status, color, religion, national origin, status with regard to public assistance or any characteristic protected under federal, state or local law. Journeyman Window Cleaner at Final Touch, LLC

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment. Carpentry Contractors Company, a Division of US LBM is seeking a Framing Carpenters for jobsites around the Twin Cities area. Schedule: Mon-Fri: 7:00AM - 4:30PM Wage: $20.00 - $30.00 per hour based on experience. A Brief Overview The Carpenter is responsible for performing carpentry tasks. This person will perform a variety of tasks in an assigned area as they construct, repair, restore, and install structural woodwork and related materials. What you will do Adhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment. Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties. Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required. Provide required personal tools. Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw. Square walls and install sheathing correctly. Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools. Select and supply crew, carpenters and leads with materials. Use proper nailing procedures for all applications. Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components. Finish, inspect and ensure work complies with quality standards and expectations. Keep jobsite clean and safe. Comply with Company's attendance policy by maintaining regular and predictable attendance. Education Qualifications High School Diploma or GED required. completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred. Experience Qualifications less than 1 year of carpentry experience in the commercial and/or residential sectors required. Skills and Abilities Knowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards. Knowledgeable of the qualities, adaptability, and use of various woods and materials. Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary. Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures. Available for overtime as needed. Licenses and Certifications DL NUMBER - Driver License, Valid and in State along with reliable transportation required. Additional Potential Opportunities based on experience: CARPHELP - Carpenter Helper LEADCARP - Carpenter Lead US LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Job Title: Construction Senior Project Manager The Company: Terra Construction is a leading Twin Cities construction firm recognized for excellence as a Minnesota-based commercial builder which has been honored to be named one of the Minneapolis St. Paul Business Journal's "Best Places to Work". Terra delivers construction management, general contracting, design-build, and tenant improvement services to the municipal, education, corporate, retail, healthcare, and industrial sectors. We are a high-energy team committed to collaboration and fostering a positive work environment. We value honesty, open communication, and respect, all while having fun together. Do you have the desire to be part of something special? Join Team Terra and experience our unique company culture. Apply now! The Position: Terra is currently seeking an experienced Senior Project Manager (SPM) with a background in commercial construction to join its Team. Healthcare and/or tenant interiors experience is preferred. Position Summary: The SPM is responsible for leading, planning, directing, and coordinating activities of multiple complex construction projects or a project portfolio, ensuring successful delivery aligned with Terra's standards and client expectations. Responsibilities include preconstruction leadership, strategic budgeting, team oversight, and client management, from estimating through closeout. Essential Duties and Responsibilities: Lead all phases of construction projects-from preconstruction through completion-across multiple job sites. Prepare budgets, detailed cost estimates, bids and proposals to ensure project and client goals are achieved. Complete pre-bid site inspections and lead proposal strategy for competitive advantage. Draft and negotiate owner and subcontractor contracts; oversee submittals, RFIs, and other key documentation. Strategically procure trade contractors, suppliers, and materials, balancing quality, cost, and schedule. Prepare and lead meetings with internal and external stakeholders; ensure meeting notes and actions are documented and executed. Track and drive progress against construction schedules; implement corrective action as needed. Apply Lean Construction principles to promote efficiency and reduce waste. Ensure timely inspections, permitting, and final approvals; secure Certificate of Occupancy. Review and analyze project reports (progress, financials, risks, forecasts); make strategic decisions to optimize performance. Serve as the primary liaison for client communication; foster long-term relationships built on trust, service, and results. Oversee project teams, including PMs, APMs, engineers, and superintendents; mentor and develop junior team members. Lead change management process, including negotiation of cost and time impacts. Ensure compliance with Terra's Safety and Quality programs and policies. Drive project closeout and client satisfaction; prepare turnover documentation and facilitate final walk-through. Support business development and preconstruction pursuits, including interviews and proposal input. Perform other duties as assigned. Required Knowledge, Skills, and Abilities: Proven capability of independently managing multiple complex and impactful commercial projects. Strong leadership capabilities, including team building, mentorship, and talent development. Expertise in cost control, risk mitigation, value engineering, and contract negotiation. Strategic thinker with the ability to balance project details with broader business goals. Strong interpersonal and client-facing skills; comfortable in high-level presentations and negotiations. Proficiency with Microsoft 365, Microsoft Project, Procore (required); knowledge of CMIC (preferred). Demonstrated ability to foster a culture of safety, integrity, quality, and accountability. Effective at managing up and across departments; contributes to continuous improvement efforts. Deep understanding of project financials and ability to maximize profitability across a portfolio. Education and Experience Requirements: Bachelor's degree in construction management, construction engineering, civil engineering, or equivalent education and experience sufficient to perform the essential duties of the job. 10+ years of related experience managing commercial construction projects, including leadership on complex projects with a proven record of successful outcomes. Preferred Knowledge, Skills, and Abilities: Proficient in Procore and familiar with CMIC software. OSHA 10 or 30 training. First Aid and CPR certified. PMP Certification. Experience with Lean Construction and continuous improvement methodologies. Other: Valid Driver's License and reliable transportation, ability to maintain a satisfactory Motor Vehicle Record, and ability to adhere to Terra's Vehicle Policy. Travel and temporary relocation to project sites within Minnesota may be required. Physical Demands: The physical demands described are representative of those that must be met by any employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential functions include items such as ability to: Clearly communicate information (both written and verbal) to colleagues and key stakeholders Stand and/or sit in a stationary position for extended periods of time; 50%+ Use a computer/laptop/iPad in open office environment with natural and/or florescent lighting Travel to and navigate between building floors of tenant spaces and job sites and attend off-site meetings Lift up to 50 lbs. unassisted Why Team Terra? Our friendly atmosphere and generous benefits package make us a wonderful place to work. Terra offers full-time employees the benefits listed below and more: Competitive Pay Responsible Unlimited Flexible Time Off Nine Paid Holidays Workplace Flexibility Medical Insurance Plan Options, Terra pays 100% of Employee Premium 401(k) & Roth Plans with Employer Matching Dental & Vision Plans Health Savings Account (HSA) & Limited Flex Spending Account (FSA) Employee Assistance Program (EAP) Company sponsored Short and Long-Term Disability, Life/AD&D Insurance Paid Parental Leave Paid Military Leave for Active Reserve Duty Along with our employer sponsored plans, we also offer an array of Voluntary Benefits and other perks. In addition to our generous benefits package, the salary range for this position is $120,000 to $175,000. Your final base salary will be determined by several factors, including skills, education, and experience. While compensation will be based on individual qualifications, most offers would not be at the top of the scale. We also prioritize pay equity among our team members when making final compensation decisions. Terra is a Drug-Free Workplace and requires all new hires to complete a pre-employment drug and alcohol screen test, criminal background check, and motor vehicle report. Interested in joining Team Terra? Apply at *********************** or send resumes to ******************* for consideration. EEO Policy: Terra is an equal opportunity employer and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Reasonable Accommodation Notice: In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation to apply for a position, please email **************. Reasonable accommodation will be determined on a case-by-case basis. Eligibility: Positions require verification of employment eligibility to work in the U.S. Terra does not accept recruiting agency solicitations.

Are you a seasoned curtainwall designer looking to take the next step in your career? Enclos is seeking a skilled and motivated Fabrication Lead to join our engineering team and help drive excellence across some of the most complex facade projects in the industry. This is a key lead role for someone who thrives at the intersection of design, fabrication, and technical problem-solving-guiding project drawing packages, mentoring designers, and ensuring quality at every stage. If you're ready to use your expertise to influence project outcomes and help shape the next generation of curtainwall talent, we'd love to connect. Position Overview: The Fabrication Lead position at Enclos is a highly technical and hands-on role responsible for guiding a team of curtainwall designers and technicians through the full lifecycle of project design. This role oversees quality assurance and drafting standards, coordinates complex project drawing packages, and serves as the critical link between design intent and fabrication, assembly, and installation. The Fabrication Lead mentors junior team members, provides technical guidance, identifies design changes, and supports collaboration with engineering, field, and fabrication teams. This position requires advanced drafting experience, proficiency in CAD and modeling tools, and the ability to lead, problem-solve, and communicate effectively across project stakeholders. Essential Duties and Responsibilities: * Trains and mentors Curtain Wall Technicians, Designers I, and Designers II. * Oversees and coordinates Quality Assurance/Quality Control policies for engineering team subordinates. * Coordinates a portion of a projects drawings (plans, elevations, details, embeds, layouts, tag, unit, parts, take-offs, 3D, dies, etc.) * Identifies design and scope changes and communicates changes to System Designer. * Identifies requests for information (RFI's) re: design and scope changes. * Assists in reviewing and interpreting rough sketches, drawings, specifications, and other engineering requirements received from Professional Engineer, and helps to ensure that revisions are incorporated into the production, fabrication, and field drawings. * Understanding the design impact through the lifecycle of a project. Can anticipate how the design will be fabricated, acquired, assembled, shipped, and installed. * Provides feedback regarding project to System Designer or TPM. * Participates in mock-up activities (fabrication, assembly, and testing) as required by the Operations Project Manager. * Participates in performance reviews of engineering team subordinates. * Reads and interprets project architectural drawings and specifications to determine best systems, designs and components to be used for production drawings. * Interprets project specifications, contract, cost estimate, and contract drawings. * Accurately evaluates time required to complete an assignment. * Ensures that assigned team complies with company policies regarding CAD and drafting standards, as well as safety and security procedures. * Provides assistance to field, shop, or vendors. Qualifications: * Associate's degree in Architectural Drafting, Engineering, or related field. * 5-10 years of curtainwall drafting experience. * Ability to coordinate a small group of subordinates, and delegate work as needed. * Ability to communicate effectively both orally and in writing. * Ability to use CAD, Word Processing, spreadsheet, Email and Internet software. * Proficiency in at least two of the following programs: AutoCAD, Revit, Inventor. * Ability to perform and/or coordinate work of subordinate team members (Curtainwall Technician, Designer I & Designer II) within a project. * Ability to solve problems involving several well-defined variables in standardized situations. * Knowledge of advanced drafting techniques and modifications of theories, precepts, and practices of the curtainwall field. COMPENSATION At the Enclos Family of Companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Fabrication Lead role in Minneapolis, MN can expect to earn $65,000 to $85,000 per year. This position is also eligible to participate in the company's incentive bonus plan. Benefits include, and are not limited to: * 401(k) plan with company match * Medical, dental, prescription, vision coverage * Tax-advantaged accounts for healthcare expenses * Flexible time off and paid holidays * Paid parental leave * Career growth and nationwide career opportunities Equal Opportunity Employer Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law.

CTI has been a leading AV provider for over 35 years. Since we began in 1988, our mission has been simple: to provide a fantastic customer experience. At CTI, our biggest asset is our people, and we know that sometimes the most awesome employees don't fit the typical mold. If you are hardworking, friendly, and know the importance of fantastic customer service, you could be a good fit at CTI. We have developed a collaborative and lively working environment, where the best and the brightest show up to work each day ready to have fun, and employ their passion for and knowledge of technology into everything they do. This creative atmosphere helps us apply and share our skills with our clients, who seek quality, high-end AV and Conference Solutions. So, what are we looking for? We are looking for an AV Project Manager for our Minneapolis branch whose attitude, skills, and work ethic will embody our mission “to provide a fantastic customer experience”. Somebody who is passionate about AV, a dynamic and highly organized self-starter, and isn't afraid of rolling up their sleeves in order to get the job done on time. They can handle all aspects of successfully executing AV integration projects, but aren't micro-managers. They know how to delegate responsibilities efficiently and their written and verbal communication skills are second to none. If this sounds like you, we will provide the necessary training, support, and work environment to help you succeed. We take pride in our employees, who are known in the industry as customer focused problem-solvers who can get the job done. What are your responsibilities? -Act as a liaison between client and technical operations staff -Effectively communicate deadlines, specifications, and budgets to A/V install team. -Assist A/V install staff with project completion, including installation, programming, and punch lists. - Other tasks as assigned Will you fit in? -Our employees fearlessly embrace the company culture and applicants who merely want to punch in their timecards everyday are not what we are looking for. -You can work independently with minimal guidance, but aren't afraid to ask the right questions when you need help. -You have strong verbal and written communication skills, and can be the face of our company to our clients. Does experience count? - Education : Associates degree is preferred, but not required. We take into account your experience/skill level and what you bring to the table as an individual. -Customer Service Experience : A must! As you can see our customers are #1 and we need someone who can take care of them. -Attitude and Aptitude : Are key! We need someone who is eager to learn and comes to work ready to tackle any situation. -Communication : Very important! You will be working and communicating with clients, and different departments within the company. Lines of communication must be clear, concise, and open, in order for the process to run smoothly. - A/V Install or Project Management : 1-2 years minimum. Knowledge of the industry is preferred, however not required, as you will be the main POC for our clients and employees, while the AV/Conference solution is being implemented. What's in it for you? At CTI, we know our company's success is directly correlated to the success of our employees. So it's fitting that we thrive on and encourage employee growth, both professionally and personally. Our competitive compensation package includes: -A competitive base salary $60k-$110k (DOE) -Employer matched medical and dental insurance (available after 60 days of employment) -Employer matched 401K up to 3% (after 6 months of employment) -Bonus eligibility that is based off a results oriented incentive plan (after 6 months of employment) -A graduated PTO program, all major holidays off, as well as three “floating” holidays, available upon first day of employment -Special gifts for significant life events, such as marriage, the birth of a child, and buying a house. -Cell phone reimbursement plan. -Long and Short Term Disability 100% paid by CTI. CTI is an equal opportunity employer. We do not and shall not discriminate on the basis of race, color, religion, gender, age, national origin, disability, marital status, sexual orientation, or military status in any of its activities or operations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire

Job Description Harvey Vogel Manufacturing has been a trusted name in precision metal stamping for over 75 years. We continue to deliver high-quality, custom metal components to a wide range of industries including medical, aerospace, defense, electronics, and industrial equipment. Our team is growing, and we're looking for a skilled Sales Estimator to help us quote competitively and accurately in a fast-paced, customer-driven environment. Position Summary As a Sales Estimator, you will be responsible for analyzing customer specifications and generating accurate cost estimates for stamped metal parts and assemblies. You'll work closely with sales, engineering, tooling, and production teams to ensure quotes reflect both customer requirements and internal capabilities. Key Responsibilities Review customer RFQs, drawings, and specifications to develop detailed cost estimates. Collaborate with internal teams to determine tooling, material, labor, and production costs. Prepare and submit formal quotations in alignment with company pricing strategies. Communicate with customers to clarify technical requirements and provide support during the quoting process. Maintain and improve estimating tools and databases. Track quote activity and follow up to maximize conversion rates. Support the sales team with market insights and pricing recommendations. Qualifications 3+ years of experience of estimating in the metal stamping and fabrication industry. Strong understanding of stamping processes, materials, and tooling. Ability to read and interpret technical drawings and CAD files. Proficiency in Microsoft Excel and ERP systems, Epicor Preferred Excellent communication and organizational skills. Detail-oriented with strong analytical thinking. Why Join Harvey Vogel? Be part of a legacy of manufacturing excellence and innovation. Work in a collaborative, team-oriented environment. Competitive compensation and comprehensive benefits. Offer Contingent on Successful Background Check

Ulland Brothers, Inc., is a Civil/Highway-Heavy, aggregate and site development contractor with offices in Carlton, Virginia and Albert Lea, MN. Ulland Brothers has operated in the construction industry for over 100 years. Ulland Brothers is looking for a career-minded and safe Operator to work full time from approximately mid-April to November or more in Southern Minnesota. The work requires being away from home periodically. This is a union position. Operating Engineer #49 This is a safety sensitive position. PRIMARY JOB DUTIES: Operates various types of power construction equipment including but not limited to: rubber-tired backhoe, loaders, rollers, graders, excavators, etc. to excavate or move and place dirt or materials during the course of construction. SKILLS & EXPERIENCE: Minimum of 2 years' operating experience. Good ability and knowledge in the operation and maintenance of such equipment as listed above. Operation requires adjusting handwheels and depressing pedals to drive machines and control attachments such as blades, buckets, scrapers, and swing booms. Controlling levers and pedals on assigned equipment to lower bucket or scoop up material. Required to perform maintenance duties such as cleaning, greasing, and oiling machines. Requires ability to read and understand blueprints. CDL helpful. ESSENTIAL ACTIVITIES: This position requires operating equipment in a safe manner. It is a requirement to follow instructions and meet set standards and to judge distances and slopes accurately. This is inside and outside work in all types of environments, conditions, weather, and seasons. Appropriate personal safety equipment is supplied. This is medium duty work requiring lifting, climbing and sitting. Crouching, or stooping and bending, full use of hand, arms, and legs and eye-hand coordination is essential. Reaching and feeling, overhead lifting, and repetitive motions are required: Talking and hearing; good eyesight (either naturally or with correction); and color discrimination are essential to satisfactory performance. Due to the nature of the position, an Operator may be required to perform other duties throughout the course of a workday. Regular and timely attendance is essential, and hours must conform to the company's operating hours. DRUG TEST REQUIRED. Ulland Brothers is proud to be an equal opportunity employer that strongly encourages Women, People of Color, LGBTQ+ individuals, people with disabilities, and Veterans to apply. All aspects of employment will be based on merit, competence, performance, and business needs without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status, or any other protected class. We are committed to creating an inclusive environment for all employees. Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

Who We Are… Since our founding in 1901, Limbach's primary core value has always been simple: We Care. That commitment extends to our people, our customers, and the communities we serve-driving a culture of belonging across our industry. Pioneer Power, a subsidiary of Limbach Holdings, Inc. (NASDAQ: LMB) based in Woodbury, MN, is a leading building systems solutions firm delivering mission-critical systems that support life's most important moments. We specialize in revitalizing and maintaining HVAC, mechanical, electrical, plumbing, and control systems within existing facilities-ensuring buildings are always ready to perform when it matters most. Learn more about Limbach by checking out our YouTube channel: We Are Limbach - YouTube From healthcare and education to government and commercial facilities, we partner with building owners and operators to safeguard reliability, efficiency, and comfort where it's needed most. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. Learn more about Limbach's commitment to our people and career opportunities, straight from our employees via the Limbach Unlocked podcast: Limbach Unlocked - Why We Chose Limbach We carry out our vision and purpose through a commitment to our four core values… * We Care * We Act with Integrity * We Are Innovative * We Are Accountable The Benefits & Perks… * Base salary range of $100K - $115K * Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match. * HSA, FSA, and life insurance offerings. * Maximize your professional development with our award-winning Learning & Engagement team. * Engage in our "We Care" culture through our ERGs, brought to you by EMBRACE. * Career pathing flexibility and mobility. Who You Are… As Field Safety Rep, you will be responsible for managing all field safety training activities in pursuit of our core purpose "to create great opportunities for people." This role orients new employees with our safety culture, implements our safety program on all company projects and services/maintenance assignments, and interfaces with local project leadership team to keep safety front and center in our daily operations. This person is counted on to assist the branch leadership team in creating a workplace that is safe for our employees, partners, and customers. This Position… Some examples of the work you might do includes: * Translates the Company's safety strategy and programs into practical actions within the local branch. * Serves as a partner for the leadership team and the employees at the branch to continuously improve our safety processes and outcomes. * Engages employees at all levels proactively in safety, ensuring responsibilities, policies, practices and cultural expectations are clear. * Implements proactive measures to mitigate risks and prevent incidents through engineering controls, administrative controls, and personal protective equipment. * Leverages employee feedback to create a culture of continuous improvement. * Drives proactive incident response action plans with an emphasis on immediate mitigation and intelligent case management. * Conducts and trains on thorough near miss and incident investigations within local business units. * Conducts thorough investigations of safety incidents, determines probable cause, makes recommendations for corrective action, and facilitates proper resolution. * Attends training and conducts self-study to stay current on all federal, state, and local regulations that impact the business, and ensures the Company remains in compliance with all employer requirements. * Solicits feedback selects personal protective equipment (PPE) and related inventory for the branch. * Updates the safety software with investigations, completed training sessions, and corrective actions. * Coordinates and conducts safety training in compliance with Company, federal, state, and local laws. * Reinforces safety program standards through regular, in-person job site visits, and the completion of detailed job site safety audits * Demonstrates commitment to an injury-free environment through personal accountability and mentoring. * Liaises with outside parties and/or internal safety subject matter experts as needed. What You Need… * 5+ years of relevant safety experience. * Prior work experience in a highly safety sensitive environment, such as construction. * Skilled in hazard recognition and safety risk management. * Basic proficiency with computer applications and training development software. * Strong decision making, problem solving, and time management skills. * Demonstrated ability to develop strong working relationships and communicate with diverse audiences. * Familiarity with the requirements of mechanical construction and OSHA regulations. * Must have a valid driver's license. * Must have a driving record compliant with the Company's policies and MVR requirements, and consent to ongoing driving record monitoring by the Company. * Ability to travel up to 80% of the time. Preferred Qualifications: * Bachelor's Degree in occupational health or related field. * OSHA 500 Construction/501 Trainer Certification. * Demonstrated experience leading proactive safety cultures. * Prior experience leading root cause analysis and implementing corrective actions * Previous experience in a supervisory or management role. * Previous experience in a supervisory or management role. * Bilingual (in English and Spanish). * Current CPR/First Aid Certification. * Qualified for Fall Protection, Confined Space, and Trench & Excavation. Conduct Standards: * Maintains appropriate Company confidentiality at all times. * Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations. * Champions the "Hearts & Minds" safety culture through personal leadership and coaching others. * Consistently exemplifies the Core Values of the Company (we CARE, we act with INTEGRITY, we are INNOVATIVE, and we are ACCOUNTABLE). Work Environment: * This position operates primarily in a field office environment, and routinely utilizes standard office and presentation equipment such as laptops, printer/scanners, and audio visual tools. * Training may occasionally take place at local job sites and require the operation of tools as part of the session, which means intermittent exposure to the conditions typically associated with a construction site. Physical Demands: * In performing the duties of this job, the incumbent is regularly required to sit, stand, walk, talk, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity. * You may occasionally be required to climb, crouch, kneel, stoop, feel, and grasp. * This is considered a medium work position, which means possible exertion of up to fifty (50) pounds of force occasionally, and/or up to thirty (30) pounds of force frequently, and/or up to ten (10) pounds of force constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job Description Company Overview Founded in 1942 in St. Paul, Minnesota, and headquartered in Woodbury, Minnesota, Harvey Vogel Manufacturing Co. is a leading provider of metal stampings, fabrications, and assemblies. We are dedicated to delivering cost-effective, high-quality, and timely solutions to customers worldwide. Position Summary Harvey Vogel is seeking a Sales Account Engineer/Estimator to support company growth and drive new business opportunities. This role is responsible for estimating methods, processes, and tooling for component parts and assemblies, while also contributing to sales and marketing initiatives. Key Responsibilities Develop and pursue new business opportunities. Prepare accurate and timely price quotations. Communicate effectively with customers and manage inquiries. Process orders and review job specifications for accuracy. Complete job packets and ensure proper documentation. Identify, qualify, and present opportunities to management. Provide regular updates on project status. Travel with Harvey Vogel Sales Representatives for in-person customer visits (approximately 10-12 times per year). Perform additional duties as assigned. Qualifications & Skills Strong customer focus with excellent written and verbal communication skills. Proactive, responsive, and results-oriented. Highly organized with strong problem-solving abilities. Mechanically inclined; knowledge of metal stamping and fabrication operations preferred. Fluent in reading and interpreting part prints, specifications, and tolerances. Proficiency in Microsoft Word, Excel, PowerPoint, and CRM software. Ability to work independently and collaboratively as part of a team. 2-4 years of experience in metal stampings or sheet metal fabrication (or equivalent). Compensation & Benefits Competitive salary (commensurate with experience). Bonus opportunities, profit sharing, and annual performance bonus. Comprehensive benefits package, including: 401(k) Health, dental, and vision insurance Health savings account (HSA) Life insurance Paid time off (PTO) Tuition reimbursement Schedule Full-time On-site position in Woodbury, MN 55125 How to Apply For immediate consideration, please apply online. Offer Contingent on Successful Background Check

TECHNICAL DEPARTMENT PLC Technician 3rd Shift Primary Function: The incumbent provides advanced level experience and skillsets in the Technical Department of Otsego Paper LLC. The areas of responsibility include but are not limited to the setup, programming, diagnostics, and troubleshooting of the plant's PLC & DCS control systems - to ensure proper and efficient utilization of equipment, materials and manpower - maximizing safety of personnel and reliability/performance of equipment Basic Requirements: * Must be able to perform this job safely. * Must be capable of carrying on-call phone and working weekends without assistance. * Advanced experience with industrial programming, instrumentation, and electrical trades. * Advanced computer skills (Microsoft office suite, spreadsheets, data entry, etc.) * Maintain safe working conditions for department and ensure their compliance with Plant Safety Programs. * Maintain well organized and accurate records relating to equipment maintenance, process efficiency, government agency reports, permits and material requisitions. * Can read, follow, and modify drawings for large, complex system P&ID's, system loops, pneumatic/hydraulic schematics, electrical one-lines, mass and energy balances, etc. without assistance. * Display advanced competencies in the following areas: communication, decision making/problem solving, energy, drive, ambition, job knowledge, leadership, managing conflict/negotiation, managing resources, and work quality. * Advanced experience with manufacturing instrumentation systems and control panels including adherence to NFPA codes. * Assist with management of all control systems in the mill: * Maintenance of all equipment * RPM Program requirements * All inspections and SAR requirements * Electrical Experience - Intermediate Level: * Wiring diagrams and schematics * Residential voltage systems (115/230 volt) * Industrial voltage systems (3 phase 480/2400) * Switchgear, circuit breakers, fusing * Motor starters, heaters, pilot circuitry * Pushbuttons, timers and devices * VFD setup, operation, maintenance, and troubleshooting * Instrumentation Experience - Advanced Level: * VDC and 4-20ma sensors and control devices for pressure, flow, temperature, position, voltage, current, strains, consistency etc. * Pneumatic control systems (valves/solenoids, positioners, pressures, flows, guides, etc) * Hydraulic control systems (valves/solenoids, positioners, pressures, flows, guides, etc) * Steam controls systems (valves/solenoids, positioners, pressures, flows, etc) * Wiring diagrams and schematics * Process Control Experience - Advanced Level: * PLC setup, programming, and troubleshooting for Ladder Logic and Sequential Function Chart environments. Rockwell, Automation Direct. * DCS/SCADA setup, programming, and troubleshooting in Function Block and Structured Text environments. Foxboro, Ignition. * HMI setup, programming, and troubleshooting. Rockwell, Ignition, Foxboro. * Networking of IP devices and understanding of protocols (ethernet IP, TCP/IP, modbus TCP, etc) * PID Control Loops and Tuning * Experience with safety systems: * Integration with legacy systems * Upgrades to existing * Basic knowledge of codes Job Procedures and Requirements: Reporting to the Technical Manager, the incumbent is highly experienced in industrial programming, instrumentation, and electrical trades. They must continually elicit a high standard of safety performance for themselves. The PLC Technician 3 must be proficient in all aspects of the mill control systems and instrumentation. The incumbent is responsible for assisting with the development and maintenance for the control systems in the mill, powerhouse, and waste treatment. They must possess a high degree of technical aptitude and in-depth knowledge of manufacturing process controls and instrumentation systems. The incumbent must stay abreast of new technologies and work with the engineering group with planning and implementing new capital projects within their area of expertise. They must demonstrate a solid understanding of mill processes and how the control systems impact the process. They must be able to access all control systems, troubleshoot, and make programming changes without any oversight. The incumbent is capable of taking high level concepts from their customers and implementing those within their respective area. They must also be fully proficient and display and advanced level in troubleshooting equipment malfunctions, preventive maintenance work, and routine equipment repairs and overhauls with no oversight. The incumbent will be a key stakeholder on teams for implementing repair and upgrade projects within their respective department. This includes planning, part specification, coordination, supervision, and successful implementation utilizing both in house and 3rd contractor resources. Qualifications: * Licensed Electrician in the State of Michigan preferred. * 3-5+ Years Industrial Controls and Instrumentation/Electrical Experience. * USG Safety Model Program, OSHA, FM Global and Environmental compliance experience preferred. * USG RPM program experience preferred. * No significant performance/ attendance infractions within the last 36 months. * Must be able to perform all tasks required in the subsequent positions. Rate of pay may be adjusted based on the qualifications and experience of the candidate. USG employees enjoy a number of benefit options for themselves and their families. These include two medical insurance options, as well as vision and dental coverage. The cost of these optional programs varies based on coverage level - employees generally pay 25% of the monthly premium cost, USG pays the rest. These coverage options are offered on the first day of employment with no waiting period. Additionally, USG employees enjoy both a 401(k) Investment Plan with company match and a pension plan. Beyond these main features, employees may also choose from a number of additional programs like life insurance, accident insurance, legal insurance, even pet insurance, just to name a few. USG also offers Quarterly (hourly) / Annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. USG also provides employees with paid time off and paid holidays. Since 1902, Chicago-based USG has been a leader in producing innovative, award-winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values - innovation, quality, integrity, service, diversity, efficiency and safety - have helped us become the company we are today. EOE including disability/veteran

Department Manufacturing Locations Otsego - 105 Hourly/Salaried Hourly Oracle Department Otsego-Reliability|USG Paper, LLC|USG Business Group Oracle Job Title MFG. Summer Hire. . ||USG

Quanex is looking for a Product Specialist to join our team located in Owatonna, Minnesota or Sioux Falls, South Dakota. The Product Specialist will support the product management team in initiatives related to the life-cycle management of Quanex's Door portfolio. In this role, you will support product development, assist with go-to-market strategies and ensure that customers receive the best value from our solutions. Your responsibilities will range from supporting daily inquiries, to analysis of key performance metrics & gathering market and customer insights that help influence the product strategy. You will need to effectively communicate & collaborate with key product team members and internal stakeholders such as sales, global supply, operations, marketing and engineering. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Product Specialist? * The ability to flex between a wide range of projects * Collaborative and Team-Oriented environment * The ability to develop product positioning, messaging and value propositions What Success Looks Like: * Collaborate with Product Managers to gather customer feedback and contribute to product development and enhancements. * Assist in analyzing product data, including revenue, profit, demand, market data and provide recommendations. * Conduct market and competitive analysis to identify trends and opportunities. * Support product harmonization efforts to help streamline and simplify the portfolio. * Respond to daily inquiries from the sales organization to support new business opportunities and risk management, support Request for Quote (RFQ) inquiries and initiate Engineering Change Orders (ECOs) for new parts. * Support product transitions to help optimize forecast and inventory levels, including excess and obsolete coordination. * Liaise between product management and marketing to develop and update product collateral, sales tools and the website to help drive awareness of Quanex's door products. * Work with product manager team members to assign, manage and report on product attributes and update product hierarchy information. * Assist door product management team members with special projects as necessary. Your Credentials: * Bachelor's degree in business, marketing or a related field * 2-5 years of professional experience * Cross-functional engagement - ability to manage projects involving stakeholders across multiple functions and facilities * Data analysis - ability to analyze data and recommend action based on the information * Team player with excellent interpersonal and collaboration skills * Focus on execution and delivery of results * Strong written and verbal communication skills * Highly motivated with an entrepreneurial mindset, and the ability to work independently. * Analytical mindset with successful track record of problem solving, idea generation, and project execution * Proficient in Microsoft Excel, Power BI experience a plus * Experience in working with cross-functional project teams The salary range for this position is $74,500 to $91,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

Quanex is looking for a Tool Room Machinist - 2nd shift to join our team located in Owatonna, Minnesota. In this role you are responsible for building, rebuilding, repairing, and modifying die cast molds, trim dies, and other tooling and machinery in a manner which will increase the speed and quality of production. Hours are Monday to Friday; 3pm - 11pm. We Offer You! * Competitive Salary * 401K Match w/ 2-year vesting period * Bonus Potential * Medical, Dental & Vision Plans * Paid Time Off & Holidays * Various Work Schedules * Tuition Assistance * Wellness/Fitness Resources * Training/Development * Employee Stock Purchase Plan * Dynamic Culture & People - just to name a few! What's attractive about this Tool Room Machinist position? * Growth Potential * Team-Oriented Environment * Ability to Make an Impact * Quarterly Bonus Potential * $3000.00 New Hire Bonus What Success Looks Like: * Review specifications, interpret drawings and/or CAD graphics or geometry, and determine construction requirements of each new tool to be built. * Make changes and/or discuss with engineering any deviations or obvious errors on prints or CAD information, to proceed with certainty on each project. * Plan, layout, and perform all bench and machine operations necessary to construct and/or alter molds, trim dies and tooling to meet production needs. * May improve and recommend changes in tolerance requirements or in tooling to reduce costs or improve quality of production methods * Coordinate and collaborate with different teams to ensure seamless operations. What You Bring: * High School Diploma or equivalent combination of education, training and experience * Minimum of four years' experience in mold repair The hourly salary for this position is $32.00 per hour and will be determined based on experience. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

Pay Rate: $37.68/Hr. Centuri companies consider several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. As an experienced Directional Drill Operator, after paid training, you will put your skills to work - safety operating equipment to move earth, tools and materials to and from job sites. Reporting to a seasoned Foreman, you will join a crew to get the job done right. We believe in the power of teamwork, and all crew members are expected to assist with general labor as needed. What You'll Do * Safely operate heavy equipment such as: skid steers, backhoe, trencher, paver, dozer, milling saw, road grater, hydro-excavator, track hoe and more * Load and unload equipment and materials * Maintain daily pre-shift vehicle and equipment inspections * Perform regular maintenance and cleaning on assigned vehicles and equipment * Maintain all industry-required Operator Qualifications * Perform other tasks as requested by leadership What You'll Have * High School diploma or equivalent * Valid Driver's License * 1+ year experience safely operating equipment in close proximity to workers and underground utilities What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training: natural gas distribution, utility excavation, safety * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Minneapolis

Immediate opening for a full time HVAC CAD+BIM Modeler/Coordinator We are seeking a detail-oriented and skilled HVAC CAD/BIM Operator to join our team in supporting the design, coordination, and documentation of heating, ventilating, and air conditioning systems. This role is critical in helping deliver high-quality HVAC layouts and construction models using AutoCAD, Revit, Navisworks, and fabrication-focused BIM tools. The ideal candidate will have a background in HVAC systems and a strong understanding of real-world installation, fabrication, and coordination needs. Responsibilities: * Develop and maintain 2D CAD drawings and 3D BIM models of HVAC systems (ductwork, piping, equipment) for commercial, institutional, and industrial buildings. * Translate HVAC designs into coordinated models ready for fabrication and installation. * Create detailed shop drawings, and as-built documentation for field and fabrication teams. * Work closely with HVAC project managers, foremen, and engineers to ensure the model reflects actual field conditions. * Participate in BIM coordination meetings with other trades to detect and resolve system clashes. * Integrate manufacturer content, fittings, hangers, and accessories as per project and fabrication standards. * Follow established HVAC drafting standards, including layering, annotation, and file naming conventions. * Update models based on RFI responses, change orders, and design modifications. * Assist with model exports for prefabrication, estimating, and layout Qualifications: Education: * Associate degree or technical diploma in Drafting, CAD/BIM Technology, HVAC Design, or related field. * Certifications in AutoCAD, Revit MEP, or Fabrication CADmep are a plus. Experience: * Minimum 2 years of hands-on experience in HVAC drafting or BIM modeling within the HVAC industry. * Familiarity with HVAC systems including duct sizing, layout conventions, equipment placement, and code compliance. * Experience in design-build or contractor environments preferred. Software Skills: * Proficient in AutoCAD MEP and Revit MEP. * Experience with Fabrication CADmep, Navisworks, and BIM 360 (or similar platforms). * Working knowledge of Microsoft Office Suite. Key Competencies: * Strong understanding of HVAC system design principles, fabrication constraints, and site installation requirements. * Ability to interpret mechanical plans, specifications, and equipment submittals. * High level of accuracy and attention to detail in drawings and models. * Team player with excellent communication and collaboration skills. * Capable of working under pressure to meet tight deadlines and multiple project demands. Preferred Qualifications: * Familiarity with SMACNA standards and local mechanical codes. * Experience in prefab workflows, laser scanning, and point cloud modeling. * On-site experience with HVAC systems or field coordination background. Working Environment: * Office environment with frequent visits to job sites. * Typical schedule is Monday-Friday, with flexibility for project milestones. Benefits: * Competitive salary based on experience * 100 % paid for health, dental & vision * Generous 401K * Paid vacation & holidays * Stable, growth-oriented team environment WHV Inc. is an Equal Opportunity Employer. Apply Online Vision Design Share This on Social Media FacebookXLinkedInPinterestEmail

Description Join Us as a Community Manager for The Meridian at City Place in Woodbury, Minnesota!Are you ready to lead a dynamic team and make a lasting impact on the residents and communities you serve? Thompson Thrift is seeking an experienced and driven Community Manager to oversee the daily operations of one of our premier multifamily properties.Why Thompson Thrift?At Thompson Thrift, we don't just manage properties; we create thriving communities where people love to live. Our core values focus on positively impacting both our team members and residents. Through initiatives like TT Serve, we prioritize community outreach and personal development. We also ensure work-life balance with our Family Impact Program, offering flexible work options, concierge medical services, and financial planning to support your well-being.Your Role as a Community Manager:As a Community Manager, you will lead the charge in ensuring our property runs efficiently while providing exceptional service to residents. You'll oversee all operational aspects, manage your team, and ensure financial performance meets goals, all while fostering a sense of community among residents.What You'll Do: Leadership & Team Management: Lead and develop your on-site team, ensuring they align with company goals and deliver excellent customer service. Resident Satisfaction: Build strong relationships with residents, addressing concerns, fostering community engagement, and maintaining high resident retention rates. Financial Performance: Oversee budget management, rent collections, and expense control to meet or exceed financial goals and ensure maximum occupancy. Property Maintenance: Coordinate with maintenance teams to ensure the property remains in top condition, addressing any issues promptly. Compliance & Reporting: Ensure the property adheres to all legal requirements and company policies, preparing reports and updates for upper management. Marketing & Leasing: Develop and implement marketing strategies to ensure full occupancy, working closely with leasing teams to drive success. Our Ideal Candidate: 4+ years of progressive experience in a similar multifamily product, with a minimum of 3 years' experience as a Community Manager in multifamily. High school diploma or GED equivalent required; Associates degree or equivalent level of education and experience; bachelor's degree preferred. Experience with Class A or luxury lease-up properties preferred. CAM designation is a plus. A valid driver's license and reliable vehicle is required for this role for purpose of routine outreach marketing and shopping comps; mileage reimbursement will be provided at IRS current rate. Must be familiar with Microsoft Office Suite; proficiency in Yardi software preferred. Flexibility to work evenings, weekends, and be on-call as needed. Strong leadership skills with the ability to motivate and manage a team. Excellent communication and organizational skills. Solid understanding of budgeting, financial reporting, and market trends. Passion for creating thriving communities. Salary Range: $77,000-$82,000 annually. This position is eligible for our comprehensive benefits package, and final pay will be determined based on experience and qualifications.