Quality Control Inspector jobs at North Shore Steel - 260 jobs

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

Job Details Division: Advantage Metals Recycling LLC Other Available Locations: Missouri; Illinois Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Assist and direct customers to proper location to unload materials Inspect for the existence of flammable, radioactive, hazardous, and/or leaded materials. Inspect materials for liquids, non-metallic and all other posted or non-posted materials that are non-acceptable (i.e., propane tanks, PCBs, batteries, etc.) Ensure that any materials not allowed are not left on Company property Remove and properly store any items or material occasionally General duties involving physical handling of materials, supplies, etc. Serve as primary back up for Scale Operator role Assist others as needed Other duties as assigned Minimum Qualifications: Ability to work in a fast-paced, non-stop environment. Minimum of 1 year previous experience in general labor and/or customer service Ability to understand and carry out written and oral instructions. Ability to interact with a diverse customer base. Ability to work standing or walking for up to 12 hours per day. Ability to greet visitors, direct truck, and peddler traffic to proper locations for processing. Ability to meet attendance schedule with dependability and consistency. 5 day work week-Mon-Fri 6:00am - 4:00pm, schedule could fluxuate to include overtime, and or Saturdays depending on business needs. Flexible to work off hours, weekends, holidays in an industrial environment which includes being outdoors in all weather conditions. Preferences: Bilingual preferred Detailed Selection Criteria: Complete work history is required to be considered for this position. Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held. Any gap in work history must be reflected and include the dates. Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position: This position reports to the Quality Supervisor. The NDT Inspector will evaluate the assembly of fabricated materials by dimensional checks, visual inspection of welds and conduct nondestructive testing by ultrasonic, mag particle, and liquid penetrant processes, with knowledge working under a fully certified Level II Inspector or higher. Working with production supervisors to maintain workflow of the area and report issues to the supervisor. Evaluate examination results and determine if material meets contract specifications. Responsible for generating and maintaining NDT reports and records for company and contractors. Candidates with higher level NDT Experience and Certifications will be considered for the level of NDT Inspector for which they are currently qualified. Work Schedule: 2nd Shift (Evenings) Monday - Friday 3PM-11PM Starting Hourly Pay Rate: Associate Level: $27.75 Intermediate Level: $33.43 Senior Level: $36.66 Advanced Level (CWI Required): $38.86 Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions: Responsible for testing and evaluation, with absolute integrity, of products to ensure conformance to company and customer specifications Make decisions in the area of codes (includes AWS D1.1) and specifications under the guidance of a NDT Inspector - Intermediate Interprets reports for NDT and evaluates quality acceptance under the guidance of a fully certified NDT Inspector - Intermediate Use authority to reject material, stop work in process etc. to minimize financial loss and risk of customer dissatisfaction Works under production conditions with accurate performance and completion of work within set time limits Maintains accountable and responsible for essential tools and equipment provided along with the maintenance of these tools and equipment Actively participates in department safety, demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures Maintains timely and consistent attendance Travels 30% of work time to other facilities Other duties as necessary or directed/assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): High School diploma and 5+ years of work/educational experience or Associates Degree with 2+ years experience or Bachelors Degree 2 years experience in fabricated steel environment(s) Ability to perform basic mathematic calculations, including conversion of fractions to decimals Ability to use basic measuring tools, such as tape measures, calipers, fillet weld gauges, and levels (digital and conventional) to ensure dimensional accuracy Level I NDT certifications or be able to obtain Level I certification within 90 days Ability to operate NDT testing equipment Ability to work effectively with plant employees, supervisors, management and customers Ability to prioritize work in order to complete deadlines Must also be able to work through problems with the minimum amount of assistance from the lead person or supervisor Ability to work timely and expeditiously to deliver an on-time result without errors A strong working knowledge of Microsoft Word, Excel, and Outlook Highly Qualified Candidates Will Also Possess These Qualifications: 4 years experience in fabricated steel environment(s) Associate Degree in NDT from an accredited school SNT-TC-1A NDT Level I in UT and Mag Particle Competence in basic quality assurance disciplines including the use of dimensional inspection and gauging equipment NDT (non-destructive testing) experience Passion and integrity with the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Work is typically performed in a manufacturing plant environment and the incumbent needs to be able to move about the office, shipping area and all areas of the plant which are producing product line for the company. There is a relatively constant exposure to somewhat disagreeable work conditions such as dust, dirt, heat, fumes, and cold as well as noise levels above 80 decibels. Work conditions vary throughout the week depending on the area of the plant assigned to work in. There will be visits to both indoor and outdoor locations during all seasons of the year. Many of the tasks are physical and the incumbent has to be able to lift up to 50 lbs. although the most frequent amount of weight lifted is 20 lbs. The employee is regularly required to reach with hands and arms. The incumbent is frequently required to stand, walk, sit, use hands to finger, handle, feel, as well as balance, stoop, kneel, crouch, talk, and hear. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and depth perception. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Role and Responsibilities The Quality Control (QC) Inspector coordinates activities and enforces best-practices as it relates to the overall quality of our product and manufacturing process. The QC Inspector is responsible for receiving inspection of incoming materials, in-process inspections of product, and final inspection of outgoing customer shipments. The essential duties and responsibilities include, but are not limited to: Visual receiving, in-process, and final inspection of product to ensure product conforms to work orders. Developing and maintaining inspection reports including recording actual dimensional measurements using measuring tapes and/or diameter tapes and comparing to work order requirements. Measuring male and female threads, including National Pipe Tapered (NPT) threads, using thread micrometers. Recording and reporting non-conforming product to the Plant Manager for rework. Developing, maintaining, and enforcing current quality control procedures. Verifying completed orders conform to sales order requirements before final shipment preparation. Identifying areas for quality control improvement and implementing new methods in coordination with the Plant Manager. Qualifications and Education Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Minimum 3 years' experience required in a Quality Control field. Ductile and/or steel pipe industry experience is highly preferred. High School diploma or GED is required. Bachelor's or Associate degree in a related field is an advantage. Preferred Skills Certified Welding Inspector (CWI) is an advantage. Proficient in using measuring hand tools including measuring tapes, diameter tapes, and thread micrometers. Proficient in Microsoft Office software programs including Word and Excel. Ability to develop and maintain records in an organized and efficient manner. Ability to work well with individuals in multiple departments and be detail oriented. Excellent verbal and written communication skills and regard for quality standards. Ductile or steel pipe knowledge is an advantage. Additional Notes Pre-employment drug testing shall be required. All applicants shall be authorized to work in the U.S. COMPENSATION AND BENEFITS After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset, and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: The purpose of this position is to oversee the quality of all galvanized products prior to sending to customers to ensure we are meeting or exceeding customer expectations and to conduct final inspections on customer product to ensure all products are free of uncoated areas, acid spots, lumps, projections, globules, edge tears, spikes or heavy deposits of zinc which will interfere with intended use of the product. Under the direction of the Manager or Shift Supervisor, the QC Specialist provides training, guidance and direction to employees in an efficient, clean, safe and cost-effective manner in order to achieve the goals and key performance metrics in line with the organization's objectives. Essential Duties: * Ensure all galvanized products meet Sabre quality requirements, minimize downtime, and promote efficiency and uptime. * Perform final inspection to ensure all products are free of uncoated areas, acid spots, lumps, projections, globules, edge tears, spikes or heavy deposits of zinc which will interfere with intended use of the product. * Measure the thickness of final product and document according to the quality program guidelines. * Conduct all inspections in accordance with Sabre Galvanizing Work Instructions, SOP's, and associated ASTM specifications with regard to specific customer requirements that may go above and beyond the standard. * Read work orders or receive oral instructions to determine work assignments or material or equipment needs. * Must use good judgment, follow instructions and have good problem-solving abilities. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Excellent attention to detail and strong ability to multi-task. * Train and assess employees' competencies in the Skill-Based Pay process. * Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work. * Must have knowledge and demonstrate compliance of all safety guidelines. * Calibrate the mil gauge using calibration blocks and log results. * Record number of units handled or moved, using daily production sheets or work tickets. * Attach identifying tags to product or mark them with proper identifying information as per Work Instruction requirements. * Follow established housekeeping standards. * Additional duties as assigned by Supervisor and/or Management. * Work in your shift as scheduled * Getting along with coworkers * Additional duties as assigned by Supervisor and/or Management. Position Requirements: Education: High School Diploma or GED Equivalent preferred. Experience: Prior Galvanizing and Manufacturing experience required. Experience using forklifts and cranes required. Skills & Abilities: * Knowledge of ASTM Standards required. * Ability to read, write and speak English required. * Must be able to obtain SG Crane/Forklift Certification. * Experience using mil gauge, tape measure, hand file and wire brush highly preferred. Physical Requirements: * Must be able to lift up to 75 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Must be able to work in an outside manufacturing environment for long shifts, including weekends. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. * Must have the ability to concentrate on tasks for long periods of time and be able to observe and receive information from all relevant sources At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity Revised: 10/24/2024

The Quality Control associate is responsible for overseeing the Quality of all Finished Cap Embroidery for all shifts. This is done through effective monitoring of all the finished caps. Essential Functions: Inspect flat & 3D embroidery orders, checking for any mistakes that could have been made that do not match the customer's paper work. Such as; Styles, colors, quantities, design, design colors, and any specific notes that may need to be shown. Working closely with embroidery machine operators as well as embroidery supervisors to identify any issues that may occur. Using a heat gun to shrink foam Picking or pulling out any additional foam pieces within the design. Carefully trim loose threads. Using a marker/pen to fix any minor mistakes. Making sure all garments are clean and neat before packaging. Counting, sorting, and packaging finished garments and completing the orders to take to shipping. Discard or reject garments. Perform other duties as requested. Qualifications: Must have a positive work attitude and etiquette. Must have good verbal and written communication skills. Must be detail oriented and quality minded. Must be able to work independently as well as with a team. Must have excellent organization skills and the ability to multi task. Some sitting, standing, walking, lifting (over 75 lbs.), bending, twisting, reaching, stretching, pushing, and pulling required. Reasonable Accommodations: Cap America provides reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. If you require any accommodations to participate fully in the application process or to perform the duties of this position, please contact our HR department. We will work with you to explore potential accommodations that could meet your needs and help you succeed in this role.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Requirements Education / Certifications High School Diploma/GED Equivalent Experience Job Requirements Experience in a Quality Control or Quality Engineering department and/or Experience working within the medical device manufacturing environment Basic Math Skills Legible handwriting Attention to detail Can read a print Critical thinking skills Advanced Math skills Minimal errors with paperwork Excellent attention to detail Full knowledge of building/area of product/equipment Basic computer skills Works independently

Job Description At APC the Quality Inspector performs quality control inspections, checks, and tests during the manufacture of products. Inspects materials, parts, and products at various stages of production. Records observations and may make recommendations for improving processes operations. With the knowledge of Gage reading as well as Blueprint reading and Metrology ESSENTIAL FUNCTIONS: Adheres to ISO requirements, safety, and company standards, policies, and regulations. Utilizes measurement equipment such as calipers, micrometers, comparators, and electronic test equipment. Performs receiving inspection on incoming materials, parts, and products. Evaluates product specifications and examines them to specified requirements. Compiles, interprets and records observations of inspection processes. Identifies, communicates, and assists in the resolution of quality-related issues. Performs various quality control inspections, checks, and tests of products during various stages of the manufacturing process. Understand technical drawings and specifications. Performs other duties as assigned. Knowledge of gage reading as well as blueprint reading and metrology QUALIFICATIONS: 2-3 Years in quality in a manufacturing environment. Team player with a good attitude and willingness to assist wherever necessary to get the job done. Ability to work in a fast-paced and challenging environment. Performs other duties and special projects as assigned. May assist in other related departments as required by business needs. Able to communicate effectively both written and verbal. Ability to quickly learn department operations and company procedures. Computer and software skills (Word, Excel, etc.). What We Offer Competitive salary based on experience Comprehensive benefits package (health, dental, 401k, etc.) Opportunities for professional growth and advancement Supportive team environment Powered by JazzHR MQIcdbTBr2

Quality Inspector We are looking to add an enthusiastic, team-oriented, independently motivated individual to join our team. Individuals with an attitude for aptitude and a willingness to learn new things while surrounded by some of the smartest and brightest in our industry will thrive in this work environment. JOB SUMMARY: At APC the Quality Inspector performs quality control inspections, checks, and tests during the manufacture of products. Inspects materials, parts, and products at various stages of production. Records observations and may make recommendations for improving processes operations. With the knowledge of Gage reading as well as Blueprint reading and Metrology ESSENTIAL FUNCTIONS: Adheres to ISO requirements, safety, and company standards, policies, and regulations. Utilizes measurement equipment such as calipers, micrometers, comparators, and electronic test equipment. Performs receiving inspection on incoming materials, parts, and products. Evaluates product specifications and examines them to specified requirements. Compiles, interprets and records observations of inspection processes. Identifies, communicates, and assists in the resolution of quality-related issues. Performs various quality control inspections, checks, and tests of products during various stages of the manufacturing process. Understand technical drawings and specifications. Performs other duties as assigned. Knowledge of gage reading as well as blueprint reading and metrology QUALIFICATIONS: 2-3 Years in quality in a manufacturing environment. Team player with a good attitude and willingness to assist wherever necessary to get the job done. Ability to work in a fast-paced and challenging environment. Performs other duties and special projects as assigned. May assist in other related departments as required by business needs. Able to communicate effectively both written and verbal. Ability to quickly learn department operations and company procedures. Computer and software skills (Word, Excel, etc.). PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and working conditions requirement indicated below are examples of the demands that must be performed in carrying out the essential job functions. Physical Demands: Sitting, standing, and walking (up to continuously); frequent use of computer and telephone requiring repetitive finger, hand, and arm movement; occasionally carry office supplies and other miscellaneous items up to 5 / 35 pounds. Continuous use of seeing, hearing, verbal communication. Working Conditions: Work indoors and outdoors; exposure to temperatures commensurate with outdoor seasonal temperatures. APC is an Equal Opportunity Employer with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, age, protected veteran status, or other protected categories. Reasonable accommodations may be made to enable a person with a disability to perform the essential functions of the job. APC offers a competitive salary and benefits that include 401(K), health insurance, Vac, PTO and paid holidays.

Job Description Quality Inspector We are looking to add an enthusiastic, team-oriented, independently motivated individual to join our team. Individuals with an attitude for aptitude and a willingness to learn new things while surrounded by some of the smartest and brightest in our industry will thrive in this work environment. JOB SUMMARY: At APC the Quality Inspector performs quality control inspections, checks, and tests during the manufacture of products. Inspects materials, parts, and products at various stages of production. Records observations and may make recommendations for improving processes operations. With the knowledge of Gage reading as well as Blueprint reading and Metrology ESSENTIAL FUNCTIONS: Adheres to ISO requirements, safety, and company standards, policies, and regulations. Utilizes measurement equipment such as calipers, micrometers, comparators, and electronic test equipment. Performs receiving inspection on incoming materials, parts, and products. Evaluates product specifications and examines them to specified requirements. Compiles, interprets and records observations of inspection processes. Identifies, communicates, and assists in the resolution of quality-related issues. Performs various quality control inspections, checks, and tests of products during various stages of the manufacturing process. Understand technical drawings and specifications. Performs other duties as assigned. Knowledge of gage reading as well as blueprint reading and metrology QUALIFICATIONS: 2-3 Years in quality in a manufacturing environment. Team player with a good attitude and willingness to assist wherever necessary to get the job done. Ability to work in a fast-paced and challenging environment. Performs other duties and special projects as assigned. May assist in other related departments as required by business needs. Able to communicate effectively both written and verbal. Ability to quickly learn department operations and company procedures. Computer and software skills (Word, Excel, etc.). PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and working conditions requirement indicated below are examples of the demands that must be performed in carrying out the essential job functions. Physical Demands: Sitting, standing, and walking (up to continuously); frequent use of computer and telephone requiring repetitive finger, hand, and arm movement; occasionally carry office supplies and other miscellaneous items up to 5 / 35 pounds. Continuous use of seeing, hearing, verbal communication. Working Conditions: Work indoors and outdoors; exposure to temperatures commensurate with outdoor seasonal temperatures. APC is an Equal Opportunity Employer with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, age, protected veteran status, or other protected categories. Reasonable accommodations may be made to enable a person with a disability to perform the essential functions of the job. APC offers a competitive salary and benefits that include 401(K), health insurance, Vac, PTO and paid holidays. Powered by JazzHR BaC1GksHeZ

At APC the Quality Inspector performs quality control inspections, checks, and tests during the manufacture of products. Inspects materials, parts, and products at various stages of production. Records observations and may make recommendations for improving processes operations. With the knowledge of Gage reading as well as Blueprint reading and Metrology ESSENTIAL FUNCTIONS: Adheres to ISO requirements, safety, and company standards, policies, and regulations. Utilizes measurement equipment such as calipers, micrometers, comparators, and electronic test equipment. Performs receiving inspection on incoming materials, parts, and products. Evaluates product specifications and examines them to specified requirements. Compiles, interprets and records observations of inspection processes. Identifies, communicates, and assists in the resolution of quality-related issues. Performs various quality control inspections, checks, and tests of products during various stages of the manufacturing process. Understand technical drawings and specifications. Performs other duties as assigned. Knowledge of gage reading as well as blueprint reading and metrology QUALIFICATIONS: 2-3 Years in quality in a manufacturing environment. Team player with a good attitude and willingness to assist wherever necessary to get the job done. Ability to work in a fast-paced and challenging environment. Performs other duties and special projects as assigned. May assist in other related departments as required by business needs. Able to communicate effectively both written and verbal. Ability to quickly learn department operations and company procedures. Computer and software skills (Word, Excel, etc.). What We Offer Competitive salary based on experience Comprehensive benefits package (health, dental, 401k, etc.) Opportunities for professional growth and advancement Supportive team environment

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The API Inspector is responsible for performing inspections on pressure vessels, piping, tanks, and other static mechanical equipment in accordance with applicable API codes (e.g., API 510, API 570, API 653). The role ensures the mechanical integrity and safety compliance of assets during operations, turnarounds, and outages. Key Responsibilities: Conduct internal and external inspections of equipment in accordance with API 510, 570, and/or 653 standards. Evaluate the condition and integrity of pressure vessels, piping systems, and aboveground storage tanks. Prepare detailed inspection reports and document findings using digital reporting tools or databases. Interpret and apply applicable codes, standards, and client specifications. Coordinate with engineering, maintenance, and operations teams to prioritize inspection tasks. Recommend repair or replacement strategies based on inspection findings. Assist with developing inspection plans and schedules for routine and turnaround inspections. Maintain inspection certifications and stay current with updates to API codes and best practices.

Quality Control Inspectors are responsible for reducing scrap, material reduction and increase productivity on the production floors. They troubleshoot quality issues with product processes. The work closely with operations team to ensure process controls are in place to meet standard requirements. Accurate and timely inspections of machines and finished products Complete quality reports hourly Verify specific dimensions and material usage to assist in cost reduction Eliminate non-conforming products. Meet production goals May be responsible to perform other related duties as required and assigned Must be able to work a 3rd shift (7pm-7am) Comply with OSHA Regulations Non-temperature controlled; frequently exposed to very hot or cold temperatures Mostly indoor, industrial setting, but occasionally work outdoors Regularly exposed to loud sounds and noise levels Qualifications Experience with (Excel, Word, Outlook) preferred High School Diploma or equivalent Ability to read, write, comprehend and communicate fluently in English Ability to read, follow, comprehend technical documents Willingness to learn new products, process flow, and industry terminology Knowledge of basic math and measurements Safety awareness Ability to work with minimal supervision Prioritize tasks to achieve production goals on schedule Dependability and flexibility in work schedule availability Perform a repetitive task for long periods of time without losing focus

Quality Control Inspectors are responsible for reducing scrap, material reduction and increase productivity on the production floors. They troubleshoot quality issues with product processes. The work closely with operations team to ensure process controls are in place to meet standard requirements. * Accurate and timely inspections of machines and finished products * Complete quality reports hourly * Verify specific dimensions and material usage to assist in cost reduction * Eliminate non-conforming products. * Meet production goals * May be responsible to perform other related duties as required and assigned * Must be able to work a 3rd shift (7pm-7am) Comply with OSHA Regulations * Non-temperature controlled; frequently exposed to very hot or cold temperatures * Mostly indoor, industrial setting, but occasionally work outdoors Regularly exposed to loud sounds and noise levels