Northrop Grumman jobs in Cincinnati, OH - 131 jobs

This position is only available for pre-identified partners, suppliers, and contractors who support Northrop Grumman. Do not submit information for more than one position unless specifically directed by a representative of Northrop Grumman.

SNC's Military Fellowship Program partners with programs such as SkillBridge and Hiring Our Heroes to provide fellowship opportunities to service members transitioning to the civilian workforce. These fellowships include up to six months of on-the-job industry training for eligible service members. During this time, participants gain valuable work experience in the civilian sector and build professional networks as they prepare for their transition to full-time civilian work. NOTE: You must be currently serving on active duty to be eligible for this fellowship program. This program is not for veterans who have already separated from the military. As an A&P Mechanic, you will assist with the repair, replacement and maintenance of the key components of aircrafts. You'll support the necessary checks in regards to the mechanical and functional components of the aircraft, including the testing of and replacement of defective or faulty parts. You'll use a variety of tools and equipment to assist with diagnosis on parts to be replaced, and ensure repairs and maintenance are compliant with national and international standards of work, all while maintaining safety and cleanliness of the hanger or workshop. You will demonstrate knowledge in one of the three main components of aviation maintenance including airframe maintenance, power plant mechanics, or Airframe & Power plant (A&P) components.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations - with an unrivaled record of on time and on (or under) budget deliveries. Qualifications You Must Have: Currently serving as active duty military and be eligible to participate in the DoD SkillBridge program High school diploma or GED equivalent A higher level degree may substitute for experience Related experience may be considered in lieu of required education Must pass, written, oral and practical assessments Active, current Federal Aviation Administration (FAA) Airframe and Powerplant certification with no prior FAA violations Must have reliable transportation to and from work locations Ability to speak, read and write in English Familiarity with applicable technical schematics, diagrams, blueprints, manuals and/or publications Qualifications We Prefer: FAA repair station and/or Quality Assurance experience Able to travel on a regular basis and/or work different shifts including overtime and weekends Familiarity with Federal Acquisition Regulations (FAR/DFARS) Background in the Aerospace and Defense Industry, the US Department of Defense or US Military Ability to obtain and maintain a Security Clearance may be required At Sierra Nevada Company, LLC (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America's fastest-growing companies. Learn more about SNC This posting will be open for application for a minimum of 5 days and may be extended based on business needs. SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more. IMPORTANT NOTICE: To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. Learn more about the background check process for Security Clearances. SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We're known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation's most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

The Opportunity: Maintain responsibility for conducting daily security functions to ensure the protection of company and government assets in accordance with contract policy and regulations. Provide technical security support to personnel in the areas of base threat analysis, information systems security, communications security (COMSEC) support, and security risk assessment support. Apply advanced skills, extensive technical expertise, and full industry knowledge. Observe and document all movements of classified assets pertaining to operational FMS equipment. Work without considerable direction. You Have: * Experience with industrial security * Knowledge of COMSEC handling procedures, including proper transportation, security, and management * Ability to conduct inventory of equipment, armaments, and technical data * Ability to track trend data, draft reports, and produce incident reports if violations occur * Ability to travel up to 90% of the time to austere locations in South Asia * Secret clearance * HS diploma or GED Nice If You Have: * Experience working with a team of contractors, suppliers, and subcontractors in a contractual environment, including quality control measures and safety standards * Experience with the integration of multicultural environments and regulations through teamwork and social interactions * Experience providing day-to-day security and security analysis * Experience providing physical security support services to assess and apply the concepts and principles of physical security to protect DoD assets, including the assessment of government and contractor facilities for compliance and identification of vulnerabilities, and the application of a broad range of active and passive mitigation measures to achieve security-in-depth using DoD and USAF guidance and directives * Experience maintaining physical security inspection checklists in accordance with DoD requirements * Knowledge of NISPOM, DoD, and USAF security standards * Ability to manage physical security data to ensure accuracy and currency, including facility security status, vulnerabilities and accreditations, and security container information * Ability to proofread for grammar and punctuation with a high level of accuracy * Ability to conduct administration, monitoring, and management of metrics for secure facility access, and maintain databases and all required personnel security documentation, including access rosters and security files * Associate's degree Clearance: Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information; Secret clearance is required. Compensation At Booz Allen, we celebrate your contributions, provide you with opportunities and choices, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, work-life programs, and dependent care. Our recognition awards program acknowledges employees for exceptional performance and superior demonstration of our values. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in Booz Allen's benefit programs. Individuals that do not meet the threshold are only eligible for select offerings, not inclusive of health benefits. We encourage you to learn more about our total benefits by visiting the Resource page on our Careers site and reviewing Our Employee Benefits page. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual's particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. The projected compensation range for this position is $55,200.00 to $126,000.00 (annualized USD). The estimate displayed represents the typical salary range for this position and is just one component of Booz Allen's total compensation package for employees. This posting will close within 90 days from the Posting Date. Identity Statement As part of the application process, you are expected to be on camera during interviews and assessments. We reserve the right to take your picture to verify your identity and prevent fraud. Work Model Our people-first culture prioritizes the benefits of flexibility and collaboration, whether that happens in person or remotely. * If this position is listed as remote or hybrid, you'll periodically work from a Booz Allen or client site facility. * If this position is listed as onsite, you'll work with colleagues and clients in person, as needed for the specific role. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to disability, status as a protected veteran or any other status protected by applicable federal, state, local, or international law.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems (NGAS) is seeking a qualified Program Cost and Schedule Control Analyst 2 to join our team of high performing, diverse individuals. This position will be located on site in Beavercreek, Ohio with partial teleworking. The Air Dominance Division is a fast paced, dynamic, and complex environment that requires a candidate to possess self-initiative, strong analytical skills, and solid leadership characteristics. Candidate will have the following, but not limited to, responsibilities: Essential Functions: This Program Cost & Schedule Analyst position will, under minimal supervision, interface with the program managers, functional management, and cost account managers (CAMs) to provide financial and administrative support and analysis to meet program requirements. The Program Cost & Schedule Analyst will have experience with monthly performance management, financial planning and reporting, and performance measurement baseline concepts; applied across multiple contracts, working with an Integrated Product Team (IPT). This position will also have some experience with proposal, pre-contract, and contract startup. Good leadership skills & the ability to work with the Program Office while leading a smaller team are essential. Additional responsibilities will include: Prepare budgets and schedules for contract work and perform and/or assists in financial analyses such as funding profiles, sales outlook, and variance analysis Prepare program plans to ensure program requirements and statement of work are captured and scheduled Perform analyses and prepare reports in order to ensure that contracts are within negotiated and agreed-upon parameters and government cost control guidelines Ensure adequate funding availability by maintaining accurate records of expenditures, directing preparation of expenditure projections, and submitting timely requests for additional funding to the government Conduct cost analysis to develop EACs, generate financial inputs, and support monthly cost and schedule reviews Identify pressures and opportunities, and develop recovery plans as required Set up cost control systems (e.g. CostPoint and COBRA) and incorporate changes into the cost management system to maintain cost and schedule baselines Provide support to Integrated Product Teams, Cost Management, and Business Management Managers Assist CAMs with performance management activities including: WBS alignment, time phasing of the tasks, developing and documenting performance methodologies, monthly performance measurement, estimate to complete analysis and updates, and variance analysis research and reporting Support audits and reviews requested by programs, customers, and company management Prepare customer performance and status reports and preparation and/or review of performance measurement analysis Basic Qualifications: Bachelor's degree with 2 years of experience in program control, cost planning, business, finance, budgeting and/or similar industry related fields or a Master's degree with experience in program control, cost planning, business, finance, budgeting and/or similar industry related fields Experience with MS Office including Excel (with Macros, Pivot tables and VLOOKUP) and PowerPoint Preferred Qualifications: Possess intermediate to advanced skills working in Deltek systems like Cobra and/or MPM Experience with CostPoint and/or SAP Experience successfully supporting a monthly reporting & financial rhythm Understanding of and experience with providing support to Integrated Product Teams (IPT) Candidate must gain and have an understanding of, and adherence to, company policies, procedures and internal controls Ability to obtain and maintain a DoD Secret within a reasonable period of time, as determined by the company to meet its business needs We offer phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly collaborative workplace. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Does this sound like you? Our Employee Resource Groups (ERGs) provide benefits for the member, our leaders and the company. Our ERGs offer opportunities to be a friend, be active, be a volunteer, be a leader, to be recognized and to be yourself! Every ERG is inclusive of all employees! At Northrop Grumman, we are innovating-- building the next generation of sophisticated aircraft to protect our country. Our diverse portfolio of programs means there are endless paths to cultivate your career. We are well-known for our inclusive, family environment, as well as our excellent work/life balance. We also offer exceptional benefits/healthcare, a 9/80 schedule OR 4/10 schedule, and a great 401K matching program. Primary Level Salary Range: $69,000.00 - $103,400.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Build precision components for advanced electronic systems! Teledyne is seeking an Assembler to join our team in Miamisburg, OH. In this role, you'll assemble electronic components and subassemblies with accuracy and care, supporting critical applications in aerospace and defense. What you'll do Position and align parts in specified relationships using fixtures or holding devices. Perform intermediate assembly tasks such as soldering, bonding, epoxy application, curing, laser welding, and pneumatic machinery operation. Install finished assemblies into cases and perform inline testing and inspection. Mount components like resistors, capacitors, and integrated circuits; connect wires via soldering. Adjust and trim materials to meet electrical or dimensional specifications. Read and interpret schematics and blueprint drawings. Cross-train on multiple programs and perform repair/rework operations. Complete work under close supervision and follow detailed instructions. Support intermittent overtime, typically on Fridays. What you need High school diploma or equivalent (required). 6-24 months of industrial experience or similar training (preferred). Ability to read schematics and assembly prints; familiarity with wiring, welding, bonding, and soldering (preferred). Ability to obtain IPC/J-STD Certification within 90 days of hire (required). Familiarity with ISO 9001 and/or AS9100 standards (preferred). Ability to obtain an ATF Possessor Permit. Intermediate computer skills (MS Office, Excel, Outlook). Must be a U.S. Citizen due to Department of Energy requirements (required). Physical requirements Ability to sit or stand for prolonged periods. Some bending, stooping, reaching, twisting, pushing, pulling, and lifting up to 10 lbs. Occasional lifting up to 50 lbs. What we offer Competitive pay and comprehensive health benefits. 4/10 work schedule (Mon-Thurs) with occasional Friday overtime. Medical, dental, vision, and employee assistance programs. Disability coverage and supplemental insurance options. 401(k) with company match and employee stock purchase plan. Paid time off, education assistance, and voluntary benefits like pet insurance. A collaborative environment focused on precision and quality. What happens next Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the process. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

SNC's Military Fellowship Program partners with programs such as SkillBridge and Hiring Our Heroes to provide fellowship opportunities to service members transitioning to the civilian workforce. These fellowships include up to six months of on-the-job industry training for eligible service members. During this time, participants gain valuable work experience in the civilian sector and build professional networks as they prepare for their transition to full-time civilian work. NOTE: You must be currently serving on active duty to be eligible for this fellowship program. This program is not for veterans who have already separated from the military. As an Avionics Technician, you will use your skills and expertise to perform avionics maintenance according to FCC, FAA and company policies and regulations. You'll assist with installing, testing, troubleshooting and repairing avionics components, and maintaining test equipment, tools, and manuals. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations - with an unrivaled record of on time and on (or under) budget deliveries. **Qualifications You Must Have:** + Currently serving as active duty military and be eligible to participate in the DoD SkillBridge program + High school diploma or GED equivalent + A higher-level degree may substitute for experience + Related experience may be considered in lieu of required education + Basic understanding of applicable technical schematics, diagrams, blueprints, manuals and/or publications; ability to route wires per technical drawings + Familiarity with avionics installation tooling + Exposure to wiring, wiring repair, and wiring installation + Experience with soldering and crimping techniques **Qualifications We Prefer:** + Familiarity with FCC and FCC GROL + Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment + Background in the Aerospace and Defense Industry, the US Department of Defense or US Military + Ability to obtain and maintain a Security Clearance may be required At Sierra Nevada Company, LLC (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America's fastest-growing companies. Learn more about SNC (********************************************* This posting will be open for application for a minimum of 5 days and may be extended based on business needs. SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more (********************************************** . **IMPORTANT NOTICE:** To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. Learn more about the background check process for Security Clearances. (**************************** SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We're known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation's most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Today's dynamic global security threats require solutions both big and small - solutions living within the Northrop Grumman Microelectronics Center (NGMC). Boasting state-of-the-art design capabilities, multiple processing nodes, electrical testing, environmental and QCI screening, and failure analysis, the NGMC is a leader in designing, fabricating, packaging, and delivering discriminating microelectronics to the military, aerospace, and commercial markets. For more than 70 years, we have been offering a wide range of trusted foundry and semiconductor services that deliver high performing and reliable microelectronics. Our wide breadth of technologies and capabilities allows us to provide our customers with unique "More than Moore" solutions. Microelectronics | Northrop Grumman (************************************************************ One of our most challenging new fields is Microelectronics Design and Applications (MDA), which combines the unique properties of superconductivity and quantum mechanics to develop radical new energy-efficient computing systems. MDA is seeking a **Staff Engineer Systems FW Architect** with demonstrated ability to lead systems engineers in the development of new technologies to support our innovative MDA team in support of emerging supercomputing technologies. **What You'll Get to Do:** + Define systems and demonstrations that combine technologies created by other MDA efforts into products that solve critical customer mission needs. + Drive the development and integration plan leading to the successful demonstration of cutting-edge capabilities. + Develop system level roadmaps capturing the advancement of MDA and other relevant technologies. + Work with the customer, partner, and supplier communities to develop the system conceptual systems leading to major program milestones / reviews (e.g., SRR, SFR, SDR, PDR, CDR). + Capture customer needs translating them into System-Level requirements and Technical Performance Measures (TPMs). + Support functional analysis and systems trade studies for technical solutions with respect to concept, design, fabrication, test, installation, operation, and maintenance. + Developing and implementing test plans to verify that each embedded software function performs as intended + Analyzing system requirements and developing an implementation plan complete with functional definitions and reasoned allocation of those functions between hardware and software components + Providing systems test and integration support in the implementation of new systems or new baseline deployments + Support system technical performance measurement definition and tracking. + Collaborate cross-functionally to ensure system/software designs align with system requirements. + Assist with the generation of well-defined and executable system, subsystem, and software requirements documents, interface documents, and test and verification documents. **This position will serve on-site in Linthicum / Annapolis Junction, MD or Beavercreek, OH.** **Basic Qualifications for Staff Engineer Systems FW Architect:** + Bachelor's Degree or higher in a STEM discipline (Science, Technology, Engineering, Math) with 12 years of related experience, or 10 years with a MS Degree, or 8 years with a PhD. + Experience with software programming languages including C, C++, and Python. + Experience developing in a Linux and/or Windows environment. + Experience with interaction between hardware and software for different types of standard hardware blocks, CPU and accelerators. + Experience with embedded systems debugging and system analysis tools (e.g. JTAG emulators, remote GDB servers, USB or benchtop logic analyzers). + Familiarity with common source control tools (Git, Subversion, etc.). + Candidate must be a US Citizen + **Clearance** : Candidate must currently have a DOD Secret Clearance or higher and must be able to obtain and maintain a US Government security clearance per customer requirements. **Preferred Qualifications for Staff Engineer Systems FW Architect:** + Current active TS/SCI clearance with Poly + 5 years' experience in driving ASIC/CMOS architecture decisions from a software point of view. + Advanced degree in computer science, computer engineering or related field. + Experience in architecting a software roadmap and implementation plan + Experience with embedded communications protocols such as SPI, I2C, and RS-232. + Experience with the agile software development lifecycle. + Experience with embedded systems development environments such as Xilinx Vitis and the GNU compiler collection (GCC) and related tools. + Experience with test automation and instrument control. + Experience with embedded real-time operating systems (RTOS) such as FreeRTOS, VxWorks, or Linux with PREEMPT_RT. + Experience with deriving software requirements. + Experience with creating design artifacts (e.g. UML) and design patterns. + Familiarity with Confluence, JIRA, Bitbucket and Gitlab. Primary Level Salary Range: $155,400.00 - $256,400.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

SNC's Military Fellowship Program partners with programs such as SkillBridge and Hiring Our Heroes to provide fellowship opportunities to service members transitioning to the civilian workforce. These fellowships include up to six months of on-the-job industry training for eligible service members. During this time, participants gain valuable work experience in the civilian sector and build professional networks as they prepare for their transition to full-time civilian work. NOTE: You must be currently serving on active duty to be eligible for this fellowship program. This program is not for veterans who have already separated from the military. As a Quality Manager, you'll develop, modify, apply and maintain quality evaluation, control systems, and protocols for processing materials into partially finished or finished materials product while ensuring efficient conformance to industry standards and compliance to regulatory requirements. You'll be using your skills and expertise to devise and implement methods and procedures for auditing and evaluating the accuracy of our processes, products and systems. You'll ensure that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements. Your responsibilities will include developing, applying, and maintaining our quality systems and protocols necessary to ensure efficient conformance and compliance.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations - with an unrivaled record of on time and on (or under) budget deliveries. Qualifications You Must Have: •Currently serving as active duty military and be eligible to participate in the DoD SkillBridge program •Bachelor's degree in a related field of study •Relevant work experience may substitute for required education •Typically, 6+ years of progressive quality assurance experience, which includes 0-2+ years of management experience. •Direct Aviation/Aerospace operations experience •In-depth knowledge of ISO 9001/AS9100 and CMMI standards •Experience in an electronic/mechanical systems environment Qualifications We Prefer: •Experience in a manufacturing environment •Attainment of Six Sigma Black Belt •Certified Manager of Quality / Organizational Excellence •Certified Quality Improvement Associate •Certified Quality Auditor At Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America's fastest-growing companies. Learn more about SNC. This posting will be open for application for a minimum of 5 days and may be extended based on business needs. SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more. IMPORTANT NOTICE: To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. Learn more about the background check process for Security Clearances. SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We're known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation's most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

The Opportunity: As an aerospace engineer, you know leading-edge technology, systems, and tools are critical to national defense. At Booz Allen, you can use your engineering expertise to develop advanced defense tools and technology. We need your skills and expertise in missiles to develop creative solutions that directly impact the warfighter. As an aerospace engineer on our research and development team, you'll provide expertise in evaluating new technologies, performing threat analysis and characterization, and improving the design of defense systems. Your experience with highly advanced technologies, scientific principles, theories and concepts is key and makes you an integral part of delivering a client-focused solution. In this role, you'll contribute to the direction of solutions by evaluating, analyzing, and designing tools to inform and assist analytical, defense and engineering teams across the DoD and IC. You'll work with a large community of aerospace and software engineers, remote sensing scientists, and domain experts across the effort and collaborate with clients and customers to deliver world-class solutions to evaluate new technologies and innovate new defense solutions. Your engineering knowledge will help the DoD expand and improve their capabilities to enhance national security and protect the warfighter. If you want to solve real-world challenges and lead engineering for an intelligence customer, there's a place for you here. At Booz Allen, you'll make a difference with us, and, in return, we'll invest in your future. Join us. The world can't wait. You Have: * 4+ years of experience with aero ballistic guidance navigation and control analysis * 4+ years of experience with object estimation theories * 4+ years of experience with EO and IR modeling and simulation of advanced weapons systems * 2+ years of experience with Python coding * Knowledge of advanced missile systems * Ability to work in a dynamic environment and engage with clients and customers * Active TS/SCI clearance; willingness to take a polygraph exam * Bachelor's degree in an Engineering field Nice If You Have: * Experience coding in MATLAB or C++ * Experience with the application of AI/ML methodologies using Python tools * Knowledge of aerospace materials, structures, and propulsion systems * Master's degree in an Engineering field preferred; Doctorate degree in an Engineering field a plus Clearance: Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information; TS/SCI clearance is required. Compensation At Booz Allen, we celebrate your contributions, provide you with opportunities and choices, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, work-life programs, and dependent care. Our recognition awards program acknowledges employees for exceptional performance and superior demonstration of our values. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in Booz Allen's benefit programs. Individuals that do not meet the threshold are only eligible for select offerings, not inclusive of health benefits. We encourage you to learn more about our total benefits by visiting the Resource page on our Careers site and reviewing Our Employee Benefits page. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual's particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. The projected compensation range for this position is $86,800.00 to $198,000.00 (annualized USD). The estimate displayed represents the typical salary range for this position and is just one component of Booz Allen's total compensation package for employees. This posting will close within 90 days from the Posting Date. Identity Statement As part of the application process, you are expected to be on camera during interviews and assessments. We reserve the right to take your picture to verify your identity and prevent fraud. Work Model Our people-first culture prioritizes the benefits of flexibility and collaboration, whether that happens in person or remotely. * If this position is listed as remote or hybrid, you'll periodically work from a Booz Allen or client site facility. * If this position is listed as onsite, you'll work with colleagues and clients in person, as needed for the specific role. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to disability, status as a protected veteran or any other status protected by applicable federal, state, local, or international law.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is seeking a Principal Contract Administrator/Sr. Principal Contract Administrator (Level 3/4) to join its team of qualified, and diverse professionals. This is an on-site position located in Orlando, FL or Beavercreek, OH. Other locations that may be considered Rolling Meadows, IL, Manhattan Beach, CA Hollywood, MD, Linthicum, MD or Huntsville, AL. This position's standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine‑hour day Monday through Thursday to take every other Friday off. The successful applicant will become part of Northrop Grumman's contracts organization and will support various Government programs, capture and proposal activities as well as provide contract operations support. The successful candidate will be a direct report to Contracts Leadership and will work closely on a day-to-day basis with the business managers, operations managers, capture managers and other functional teams throughout the department. The successful candidate will be responsible for all aspects of contracts from the business development phase through contract closeout, delivering strong customer satisfaction, successful financial performance, and risk mitigation. Candidate's ability to build strong customer intimacy and employee engagement is key. Candidate must be a self-starter and able to work collaboratively with team members, including in an advisory role to program management, site management and the customers. Candidate will have knowledge of Federal Acquisition Regulations (FAR) and Defense Federal Acquisition Regulations Supplement (DFARS). In this role, the selected candidate will: Work complex assignments independently and support Finance, Program Management, and various levels of Management Lead proposal preparation, contract negotiation and contract administration activities from proposal through closeout. Administer daily contract activities for a variety of product lines and contract types, including cost reimbursable and firm fixed price; such activities will include establishing payment terms, initiating, and monitoring invoicing, collections, and funding to support financial objectives. Enter and manage data in the Contract Management System, financial and delivery systems. Participate in customer meetings, performing and monitoring compliance to contract requirements and leading change management process. Ensure non-disclosure agreements and contract terms and conditions are negotiated within company guidelines. This requisition may be filled at a higher grade based on qualifications listed below. Basic Qualifications for a Level 3 Principal Contract Administrator: Bachelor's degree with 5 years of experience in contracts management, contract administration, or a Master's degree with 3 years of experience in contracts management, contract administration. Aerospace and Defense industry experience. Experience in contract negotiations. Working knowledge and understanding of FAR and DFARS and ability to efficiently and effectively research FAR/DFAR information. Ability to obtain and maintain a DoD Secret Clearance. Basic Qualifications for a Level 4 Senior Principal Contract Administrator: Bachelor's degree with 8 years of experience in contracts management, contract administration, or a Master's degree with 6 years of experience in contracts management, contract administration. Aerospace and Defense industry experience. Experience in contract negotiations. Advanced knowledge and understanding of FAR and DFARS and ability to efficiently and effectively research FAR/DFAR information. Ability to obtain and maintain a DoD Secret Clearance. Preferred Qualifications Working knowledge of FAR/DFARS clauses Experience in the defense industry Excellent verbal and written communication skills with internal and external customers Ability to work independently Ability to learn and utilize various data entry software tools and to adapt with changes to those tools Basic understanding of Government contracting requirements Preferred Qualifications: Prior experience with a variety of contract types such as Cost Plus, Fixed Price, Fixed Price Incentive Fee, etc. Solid foundation in interpreting and drafting changes to US Government contracts, non-disclosure agreements, and similar documents Prior experience supporting contracts consisting of complex production efforts. Strong problem-solving skills and the ability to be flexible and change directions when needed. Excellent organizational skills and attention to detail. Active DoD Secret/Top Secret Clearance (with a background investigation completed within the last 5 years or currently enrolled into Continuous Evaluation). Ability to obtain and maintain DoD (Department of Defense) Secret clearance Primary Level Salary Range: $82,900.00 - $136,800.00Secondary Level Salary Range: $103,200.00 - $170,300.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Our Aeronautics Systems sector is currently seeking an **Aircraft Structures Mechanic Level 3** to join our operations team, located in **Dayton, OH,** working on assembly structures, laminates and composite bonding processes Position Requirements: This position requires **at least four years of experience** working on aircraft, aerospace structures or composites with a complete understanding of the detailed aspects of the job with practical applications to problems and situations ordinarily encountered. The candidate will receive limited supervision with detailed instructions for routine work, new activities or special assignments. May assist in orienting, training, assigning and checking the work of lower-level employees. What you'll get to do: + Fabricate composite components and/or tools, which may include, tool prep, ply kit generation, lamination, vacuum bagging, de-molding, composite trimming, finishing, core fabrication, and composite bonding processes + Performing part-fitting operations such as filing, burring, crimping, trimming, gromet installation, drilling, countersinking and reaming. + Aligning parts on jigs using templates and fixtures + Measuring parts with micrometers and calipers to verify dimensions. + Modifying incomplete and complete assemblies to incorporate engineering changes to structure. + Monitoring and verify quality in accordance with statistical process or other control procedures. + Troubleshoot and solve unique problems through collaboration with engineers and other technicians. + Operate autoclave and curing ovens to complete bonding cycles + Use of appropriate PPE when working on the shop floor. + Recommend and implement continuous improvement activities in production methods, equipment performance and team effectiveness. Basic Qualifications: + High School Diploma or equivalent (GED) with at least 4-years of relatable aircraft experience in manufacturing/production (or similar) + Perform moderate strenuous physical and repetitious work to include: lifting over 25 pounds, working with chemicals, overhead work, climbing up and down ladders, prolonged kneeling, bending, or stooping, carrying tools, testing for and wearing a respirator. + Ability to obtain and maintain DoD Secret Security Clearance and special program access required + Ability to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc. + Ability to work flexible, changing shifts, including weekends Preferred Qualifications: + Active DoD Secret Clearance with a background investigation completed within the last six years with the ability to obtain program access. + A&P License + Experience with composite manufacturing, aircraft fabrication, assemblies, components, and systems in an aerospace, automotive, military, manufacturing and/or maintenance environment + Experience with high temperature composite materials including Polyimide. + Experience with structural subassemblies, including bonding, co-bonding, core bonding and bagging + Demonstrated ability using standard measuring equipment and power hand tools + Ability to read and understand blueprints, technical specifications and operating procedures Primary Level Salary Range: $25.91 - $43.22 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems (NGAS) has an opening for a Machinist Level 2 or 3. This position will be supporting our Beavercreek, OH and Kettering, OH facilities and requires onsite presence due to the nature of the role. We are a world-class manufacturer of composite structures, radomes, and antenna systems for military applications. The Machinist 2 or 3 will be responsible for setting up and operating 3 and 5 Axis Milling Machines. This is a great opportunity for an experienced CNC Machinist who desires exciting and challenging work to join our team! Essential Duties / Responsibilities: Able to set up and operate a variety of machine tools including but not limited to milling machines, lathes, and able to align and fasten work using tooling fixtures. Able to use & understand tool sharpeners, tool tolerances, dimensions, calibrated measurements, setup sheets, callouts, probes, feeds & speeds, and standard specs. Able to use a variety of machinist hand tools and precision measuring instruments to make standard shop computations relating to dimensions of work. Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Perform computations relating to dimensions of work, tooling, feeds, and speeds. Program and edit G-Code and conversational. Implement lean initiatives by identifying and providing suggestions on areas for improvement. Performs all manufacturing operations safely, with quality in mind, and with customer delivery expectations met. Able to learn and perform other job functions with OJT when required. This would include but is not limited to performing program verifications, recipe verifications, rework, data collection & recording, and part processing & handling work among other duties. The ideal candidate will be able to work under minimal supervision, be a quick learner, and a team player. And have high integrity and understand the importance of escalating errors to their supervisor immediately. *This position requires the ability to work a WEEKEND DAY shift schedule from 6:00am - 6:30pm Friday - Sunday. This role can be filled at a Manufacturing Technician Level 1 or Manufacturing Technician Level 2 depending on the qualifications below. Basic Qualifications for Level 2: High school diploma or equivalent/GED and 2 years of additional education and/or related experience Experience running machines and setup Experience on 3 Axis CNC machines Must be able to obtain and maintain a DoD Secret Security Clearance Preferred Qualifications: 2 years of experience with 5 Axis CNC vertical machining centers. Active Secret DoD Security Clearance Associates degree or Trade School certification Experience with composite, honeycomb, and aluminum materials Basic Qualifications for Level 3: High school diploma or equivalent/GED and 4 years of additional education and/or related experience Experience running machines and setup Experience on 3 Axis CNC machines Must be able to obtain and maintain a DoD Secret Security Clearance Preferred Qualifications: 4 years of experience with 5 Axis CNC vertical machining centers. Active Secret DoD Security Clearance Associates degree or Trade School certification Primary Level Salary Range: $44,200.00 - $73,600.00Secondary Level Salary Range: $52,500.00 - $87,500.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. NG Microelectronics Center is seeking a **Principal/Sr Principal Printed Circuit Board (PCB) Layout Designer Engineer** in Beavercreek, OH (Dayton, OH) to support architecture definition and product design. We are seeking engineers with the desire to learn new technologies to join our innovative organization to help develop, enhance and maintain Digital and RF designs on cutting edge products and systems. Our wide breadth of technologies and capabilities allows us to provide our customers with unique "More than Moore" solutions. The selected individual will work on board designs across the full product life cycle process. In this capacity, you will utilize your working knowledge of Layout and Library tools. **In this role you will:** + Work with all engineering disciplines to incorporate their constraints into the Mentor Xpedition PCB CAD database + Understand and adhere to the core Product Engineering PCB design processes, ensuring that the team understands and remain compliant + Develop an expert understanding of our high reliability design standards + Lead PCB design reviews, and help to create PCB design schedules + Become knowledgeable with our internal build specs, industry standards, and understand PCB manufacturability. + Perform PCB Librarian duties such as symbol and cell creation and verification + Define PCB stackups and mechanical structures + Perform complex circuit card layout tasks including DDR memory interfaces, high speed SERDES links, high density interconnects, RF transmission lines, and RF shapes + Simulate completed PCB designs for crosstalk, loss, and signal integrity issues **Are you seeking a challenging role with a strong team? Come define possible with us in Beavercreek, OH!** _This position can be filled as a Principal PCB Layout Engineer or Senior Principal PCB Layout Engineer._ **Basic Qualifications for Principal PCB Layout Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 5 years of experience; 3 years with Masters Degree; OR 1 years with a PhD + Experience with layout of complex printed circuit boards using industry standard design tools + Current understanding of IPC industry standards + Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges + Full design cycle participation of a complex circuit card + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. **Basic Qualifications for Senior Principal PCB Layout Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 8 years of experience; 6 years with Masters Degree; OR 4 years with a PhD + Experience with layout of complex printed circuit boards using industry standard design tools + Current understanding of IPC industry standards + Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges + Full design cycle participation of a complex circuit card + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. **Preferred Qualifications:** + Master's Degree in Mechanical or Electrical Engineering + Experience with Siemens Xpedition layout and library tools + Experience with electronic packaging / mechanical design + Experience with electronics design development + Mixed signal design experience + An active Top Secret w/ SCI clearance Primary Level Salary Range: $100,300.00 - $150,500.00 Secondary Level Salary Range: $124,900.00 - $187,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Top SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are looking for you to join our team as an Associate Embedded Software Engineer / Embedded Software Engineer based out of Beavercreek, OH. (Dayton, OH) As an Associate Embedded Software Engineer/Embedded Software Engineer at Northrop Grumman you will have a challenging and rewarding opportunity to be a part of our mission to deliver critical national defense products and capabilities for the warfighter. Our success is grounded in our ability to embrace change, move quickly and continuously drive innovation. The successful candidate will be collaborative, open, transparent, and team-oriented with a focus on team empowerment and shared responsibility, flexibility, continuous learning, and a culture of automation. Northrop Grumman is looking to add to our talented team of Embedded Software Engineers. Our engineers are self-starters who are part of a team of software professionals developing world-class software to meet our customer's high expectations. The Embedded Software Engineer designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements. The individual shall apply the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of engineering applications and products. This includes interfacing with customers, suppliers, application users and other technical and support personnel. The ideal individual will have experience including the full software development life cycle, which includes requirements, design, coding, testing, and integration. This work is 100% in the office. There is no remote work. This position can be filled as an Associate Embedded Software Engineer or Embedded Software Engineer: Basic Qualifications for Associate Embedded Software Engineer: Completed Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) Demonstrated Experience with Object Oriented Programming in C++ Demonstrated familiarity with Git Familiarity with operating system concepts for embedded systems Candidate must be a US Citizen Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Basic Qualifications for Embedded Software Engineer: Bachelor's degree in a STEM discipline with 2 years of experience or a Master's degree in a STEM discipline with 0 years of experience or a PhD in a STEM discipline with 0 years of experience. Demonstrated Experience with Object Oriented Programming in C++ Demonstrated familiarity with Git Familiarity with operating system concepts for embedded systems Candidate must be a US Citizen Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Preferred Qualifications: Proficient with C and C++ Familiarity in Software architecture (design patterns, objected oriented design) Experience testing, debugging, and integrating Embedded Software Knowledge with scripting languages (Python, C, Pytest, Robot Framework etc.) Familiarity with multi-threaded software and protection Experience with test equipment such as Oscilloscopes, Multimeters, etc. Familiarity with I2C/SPI communication Familiarity with Atlassian tools such as Jira and Confluence Familiarity with TCPIP Differentiating characteristics include demonstrated leadership and teamwork capability, interpersonal communication skills and activities Familiarity with Atlassian tools such as Jira and Confluence Differentiating characteristics include demonstrated leadership and teamwork capability, interpersonal communication skills and activities Active Clearance Primary Level Salary Range: $69,300.00 - $103,900.00Secondary Level Salary Range: $83,400.00 - $125,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations - with an unrivaled record of on time and on (or under) budget deliveries. SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we're applying this tenacity and expertise to the U.S. Air Force's (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you're passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here (************************************************* . Are you dreaming about a position where you can deliver quality, meaningful results? Come be a part of our diverse, multi-disciplined team of engineers, operating in an agile environment, using the latest tools and methodologies. Develop your technical acumen as well as your leadership skills at a company with huge potential for long-term career growth. As an Engineering Manager, you will be using your skills and expertise to manage functional teams through program execution for our products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You will represent the engineering department at all management level meetings. You'll ensure that the engineering design, documentation, and approvals meet the program schedules, are obtained in a timely manner and that engineering hours expended are productive, meeting program goals and budgets. You will own and continuously improve processes and procedures, oversee training of staff and provide technical direction as required. **Here's what you can expect:** + Generous paid time off and flex time + Friendly and talented colleagues + Exclusive SNC company events + Leadership and development training + SNC Mentorship Program + Education reimbursement **Responsibilities Include:** + Support project staffing plans, schedules, budgets, bids, and estimates for proposed program work packages, including the execution of risk mitigation plans. + Ensure the availability and effectiveness of required tools, processes, and training to achieve program success, while aligning with SNC tools/processes and industry best practices/standards. + Manage resource allocations required for program task execution, as well as risk, issue, and challenge identification. + Collaborate with the business to determine staffing requirements and help source, screen, interview, and hire top engineering talent. + Execute onboarding support, training, mentorship, and career path/talent development activities for engineering discipline teams. + Provide career path support, conduct performance evaluations, and facilitate conflict resolution. **Qualifications You Must Have:** + Bachelor's of Science degree in a related discipline + Typically, 8+ years of progressive engineering experience, which includes 4+ years of management experience. + Thorough understanding of requirements management, requirements derivation, and requirements allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation principles + Experience working in and leading large systems design and development teams + Thorough Understanding of engineering principles and practices + Experience with Computer Aided Engineering tools, analysis and simulation + Ability to work in multi-disciplinary design and development teams + Excellent communication and organizational skills + **The ability to obtain and maintain a Top Secret U.S. Security Clearance is required** **Qualifications We Prefer:** + Experience leading a multi-disciplinary team through system baseline definition and maturation exercises in a complex development setting + Thorough understanding of establishing, tracking, and addressing key programmatic risks + Practical knowledge of industry standard system engineering design principles, requirements management approaches, Traditional Systems Engineering and Model Based System Engineering (MBSE) approaches + Experience with identifying and coordinating resources to ensure the required tools, processes, and training are available/effective and programs are staffed and supported to achieve success + Previous management experience; exposure to recruiting employees; assigning, directing, and evaluating their work; and overseeing the development and maintenance of staff competence + Understanding of how to prepare project schedules, budgets, bids, and estimates for proposed program work packages + Prior exposure to working successfully in a highly collaborative, fast-paced environment emphasizing rapid prototyping and fielding of capabilities, with minimal supervision + Advanced Experience with requirements management and system modelling tools, such Jama, Dassault 3DX, Cameo, Dymola, and MATLAB + Extensive background in assessing and addressing Aerospace and Defense System Complexity and System Integration challenges + Experience in executing high-impact trade studies + Experience with Earned Value Management (EVM) + Experienced in the application of ISO/IEC/IEEE 15288 + INCOSE CSEP/ESEP Certification + Proven experience interviewing engineering candidates for technical positions + Effective mentorship capabilities and experience conducting training + Strong aptitude for resolving conflicts and supporting career development within the team + Background in the Aerospace and Defense Industry, the US Department of Defense or US Military + Ability to motivate/work with others + Proficiency with Microsoft Project This posting will be open for application for a minimum of 5 days and may be extended based on business needs. SNC offers annual incentive pay based upon performance that is commensurate with the level of the position. SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more (********************************************** . **IMPORTANT NOTICE:** This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use. Learn more about the background check process for Security Clearances. (****************************************************************************************************************** SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We're known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation's most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. NG Microelectronics Center is seeking a Principal/Sr. Principal Digital Engineer (FPGA) in Beavercreek, OH (Dayton, OH) to support architecture definition and product design. We are seeking engineers with the desire to learn new technologies to join our innovative organization to help develop, enhance and maintain FPGA designs on cutting edge products and systems. The selected individual will work on FPGA design across the full product life cycle process. In this capacity, you will utilize your working knowledge of RTL and digital interfaces. The ideal candidate will have experience with: + RTL modeling and simulation + Full FPGA design flow + FPGA integration into custom hardware + FPGA debugging, timing analysis, and optimization techniques + Verilog **Are you seeking a challenging role with a strong cross discipline team? Come define possible with us in Beavercreek, OH!** _This position can be filled as a Principal FPGA Digital Engineer or Senior Principal FPGA Digital Engineer._ **Basic Qualifications for Principal FPGA Digital Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 5 years of experience; 3 years with Masters Degree; OR 0 years with a PhD + Demonstrated proficiency in RTL modeling and simulation (experience within past 3 years) + Demonstrated proficiency with FPGA device(s) (experience within past 3 years) + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements **Basic Qualifications for Senior Principal FPGA Digital Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 8 years of experience; 6 years with Masters Degree; OR 4 years with a PhD + Demonstrated proficiency in RTL modeling and simulation (experience within past 3 years) + Demonstrated proficiency with FPGA device(s) (experience within past 3 years) + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements **Preferred Qualifications:** + Experience with SystemVerilog + Experience with AMD/Xilinx Versal, Ultrascale, or Zynq families of devices. + Experience with Electronic Design Automation (EDA) Tools: Vivado, Xcelium + Experience with scripting languages (Tcl, Bash, Python) + Experience with High-Speed Serdes interfaces. + Experience with industry standard bus or I/O interfaces. + Experience with board or system level debug using test equipment such as oscilloscopes and logic analyzers. + Active Top Secret SCI security clearance + MS in Electrical Engineering or comparable discipline Primary Level Salary Range: $110,300.00 - $165,500.00 Secondary Level Salary Range: $137,400.00 - $206,000.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: Top SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems (NGDS), Beavercreek Ohio, is seeking a Full Stack Web Developer. The successful candidates will demonstrate a broad skill set balanced between interpersonal and technical capabilities achieving sustainable quality products. They will have a track record as an effective communicator and problem solver who is able to develop and maintain good working relationships with internal and external stakeholders. The selected candidates will participate in the entire software development lifecycle with a concentration in software engineering. They will implement solutions in a web-based environment and integrate them into a microservice cloud-based architecture. The candidates will work closely with other software developers accomplishing the following: Support team in completing necessary software on schedule Complete work independently and as a part of an Agile team Solve complex problems through innovative and creative solutions Collaborate with software designers and/or software engineers in the planning, design, development, and utilization of software systems Regularly demonstrate progress to customers Basic Qualifications: 2+ years with Bachelor's degree in Computer Science or related STEM degree from an accredited institution Experience with HTML, CSS, JQuery, JavaScript, TypeScript Experience with Relational, Graph, or Document database. Exposure / experience with frameworks such as React or Angular Exposure / experience with microservices, swagger and API definitions Working knowledge of the Agile development processes Experience with modern IDE tools and testing mechanisms Strong interpersonal skills to communicate effectively with small technical teams. Ability to prioritize and adjust tasks to accomplish project results. Ability to comprehend and analyze complex problems and develop solutions. Must have an active Top Secret security clearance Preferred Qualifications: Experience with: Angular TypeScript Java Python Docker Kubernetes Jira Gitlab Pipelines Experience developing microservices using the Spring Framework Demonstrated use of Integrated Development Environments (IDEs) and configuration management (Git, Bitbucket) Experience working with Jira and Gitlab Experience working in Agile software development environment Primary Level Salary Range: $83,400.00 - $125,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: A US Government security clearance per customer's requirements.TRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. An organization within Northrop Grumman's Mission Systems Sector, Microelectronics Design and Applications (MDA) is a leading innovator in advanced microelectronics design and fabrication. MDA is seeking an Associate Electronics Hardware Design Engineer / Electronic Hardware Design Engineer. This position is located at Beavercreek, OH. (Dayton, OH) Roles and Responsibilities: Perform design and development of complex high speed digital circuit card assemblies integrating FPGAs and microprocessors through high-speed serial networks Take designs from concept through schematic capture, layout, assembly, debug, and production test Collaborate with peers and other engineering disciplines in the planning, design, and prototyping of complex digital systems Identify and implement risk reduction activities for your projects Interface with vendors and contractors Advise others through design reviews and implementation of industry best practices Work under general direction to independently determine and develop viable solutions Define system and CCA level specifications from dynamic, loose requirements This position will serve 100% on-site in Beavercreek, OH. There is no remote work. This position can be filled as an Associate Advanced Electronic Hardware Design Engineer or an Electronic Hardware Design Engineer Basic Qualifications for Associate Electronic Hardware Design Engineer: Completed Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) Hands on use of laboratory test equipment such as oscilloscopes and function generators Ability to solder and modify prototypes to prove a working design Ability to create test plans and assembly instructions Candidate must be a US Citizen Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Basic Qualifications for Electronic Hardware Design Engineer: Bachelor's degree in a STEM discipline with 2 years of experience or a Master's degree in a STEM discipline with 0 years of experience or a PhD in a STEM discipline with 0 years of experience. Hands on use of laboratory test equipment such as oscilloscopes and function generators Ability to solder and modify prototypes to prove a working design Ability to create test plans and assembly instructions Candidate must be a US Citizen Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Preferred Qualifications: Active TS/SCI with Polygraph Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors Experience defining interfaces with software teams for microprocessors/microcontrollers Experience with test equipment such as DMM, BERT scopes, network analyzers and signal analyzers Schematic capture and layout using Mentor Graphics Xpedition tools High speed digital signal integrity simulation using Hyperlynx, HFSS, or ADS Experience developing embedded software and software using C, C++ Experience RTL development using SystemVerilog Familiarity with AMD FPGAs and design tools Strong verbal/written communication and presentation skills Project leadership Primary Level Salary Range: $69,300.00 - $103,900.00Secondary Level Salary Range: $83,400.00 - $125,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Today's dynamic global security threats require solutions both big and small - solutions living within the Northrop Grumman Microelectronics Center (NGMC). Boasting state-of-the-art design capabilities, multiple processing nodes, electrical testing, environmental and QCI screening, and failure analysis, the NGMC is a leader in designing, fabricating, packaging, and delivering discriminating microelectronics to the military, aerospace, and commercial markets. For more than 70 years, we have been offering a wide range of trusted foundry and semiconductor services that deliver high performing and reliable microelectronics. Our wide breadth of technologies and capabilities allows us to provide our customers with unique "More than Moore" solutions. Microelectronics | Northrop Grumman (************************************************************ One of our most challenging new fields is Microelectronics Design and Applications (MDA), which combines the unique properties of superconductivity and quantum mechanics to develop radical new energy-efficient computing systems. MDA is seeking a **Staff Engineer Systems FW Architect** with demonstrated ability to lead systems engineers in the development of new technologies to support our innovative MDA team in support of emerging supercomputing technologies. **What You'll Get to Do:** + Define systems and demonstrations that combine technologies created by other MDA efforts into products that solve critical customer mission needs. + Drive the development and integration plan leading to the successful demonstration of cutting-edge capabilities. + Develop system level roadmaps capturing the advancement of MDA and other relevant technologies. + Work with the customer, partner, and supplier communities to develop the system conceptual systems leading to major program milestones / reviews (e.g., SRR, SFR, SDR, PDR, CDR). + Capture customer needs translating them into System-Level requirements and Technical Performance Measures (TPMs). + Support functional analysis and systems trade studies for technical solutions with respect to concept, design, fabrication, test, installation, operation, and maintenance. + Developing and implementing test plans to verify that each embedded software function performs as intended + Analyzing system requirements and developing an implementation plan complete with functional definitions and reasoned allocation of those functions between hardware and software components + Providing systems test and integration support in the implementation of new systems or new baseline deployments + Support system technical performance measurement definition and tracking. + Collaborate cross-functionally to ensure system/software designs align with system requirements. + Assist with the generation of well-defined and executable system, subsystem, and software requirements documents, interface documents, and test and verification documents. **This position will serve on-site in Linthicum / Annapolis Junction, MD or Beavercreek, OH.** **Basic Qualifications for Staff Engineer Systems FW Architect:** + Bachelor's Degree or higher in a STEM discipline (Science, Technology, Engineering, Math) with 12 years of related experience, or 10 years with a MS Degree, or 8 years with a PhD. + Experience with software programming languages including C, C++, and Python. + Experience developing in a Linux and/or Windows environment. + Experience with interaction between hardware and software for different types of standard hardware blocks, CPU and accelerators. + Experience with embedded systems debugging and system analysis tools (e.g. JTAG emulators, remote GDB servers, USB or benchtop logic analyzers). + Familiarity with common source control tools (Git, Subversion, etc.). + Candidate must be a US Citizen + **Clearance** : Candidate must currently have a DOD Secret Clearance or higher and must be able to obtain and maintain a US Government security clearance per customer requirements. **Preferred Qualifications for Staff Engineer Systems FW Architect:** + Current active TS/SCI clearance with Poly + 5 years' experience in driving ASIC/CMOS architecture decisions from a software point of view. + Advanced degree in computer science, computer engineering or related field. + Experience in architecting a software roadmap and implementation plan + Experience with embedded communications protocols such as SPI, I2C, and RS-232. + Experience with the agile software development lifecycle. + Experience with embedded systems development environments such as Xilinx Vitis and the GNU compiler collection (GCC) and related tools. + Experience with test automation and instrument control. + Experience with embedded real-time operating systems (RTOS) such as FreeRTOS, VxWorks, or Linux with PREEMPT_RT. + Experience with deriving software requirements. + Experience with creating design artifacts (e.g. UML) and design patterns. + Familiarity with Confluence, JIRA, Bitbucket and Gitlab. Primary Level Salary Range: $155,400.00 - $256,400.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.