NPL Construction Co. jobs in Rochester, MN

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

K&K Global Talent Solutions Inc is an International recruiting agency that has been providing technical resources in the USA region since 1993. This position is with one of our clients in The USA, who is actively hiring candidates to expand their teams. Role: Salesforce technical delivery manager Employment type: Contract Technology: Salesforce, Apex Location: Hybrid (Minneapolis, MN) Job Description- Provide technical expertise and leadership to a team dedicated to Salesforce technologies design and build activities . Ensure activities are completed, validated, aligned with architectural objectives and requirements, and successfully deployed into the production environment. Provide mentorship to the team ensuring optimization of designs/solutions. Champion standard processes and procedures. Provide troubleshooting for development and test environment issues. Key Responsibilities Provide technical expertise and leadership to a team of highly technical employees. Develop and maintain a high performing team through effective hiring, vendor partner management, coaching and performance management. Foster a collaborative, success-oriented team environment where resources are empowered and accountable. Provide work direction, delegation, and prioritization to team. Ensure compliance with company's policies, processes and procedures. Work in partnership with leadership and team members (vendors/contractors and direct reports as applicable) to deliver robust technical solutions, ensuring that service level commitments and project timelines are maintained. Ensure successful project design, configuration, performance, implementation and outstanding service delivery. Oversee the technical correctness and completeness of artifacts/documentation associated with engineering designs; pro-actively identify and resolve issues/problems. Verify that build activities are complete per the approved engineering diagrams. Redirect build activities as necessary. Oversee the hand-off of design solutions and confirm testing and validation are executed prior to the final release of new and upgraded technologies. Influence the continuous improvement of processes, policies and best practices to optimize performance and availability of technologies. Drive and develop consistent technical build, implementation and support processes. Verify designs are validated and adhere to defined standards. Ensure ongoing improvements align with standard process/service management principles and technology Systems Development Life Cycle (SDLC) methods. Evaluate, troubleshoot and participate in root-cause analysis of development and test environment issues within technical area of expertise. Once corrective action is identified, lead respective team to implement changes/improvements in designs/builds as necessary to prevent recurrence. Define, track and measure overall department performance and metrics. Complete and distribute reports, models, status updates, statistics, etc., to technology leadership as required. Provide proper escalation to leadership for issues/problems as necessary. Participate in the organization's strategic and financial planning process. Continuously develop specialized knowledge and technical subject matter expertise by remaining apprised of industry trends, the direction of emerging technologies, and their potential value to the business. Effectively present the value proposition of business appropriate emerging technologies to technology leadership. Required Qualifications Bachelor's degree in Computer Science, Engineering, related field, or equivalent relevant work experience. 8+ years of experience of progressive scope/impact/responsibility (including both hands-on and leadership roles) working with technologies. Proven track record for delivering varying initiatives and driving execution. Demonstrated experience and success in influencing, leading, and coaching without direct leadership responsibility. Demonstrated reasoning and troubleshooting skills. Demonstrated in-depth and hands-on experience working with salesforce platform on configuration, customization (Lightning Components, Apex, Visualforce, SOQL, etc.), integration, security, administration and other core features. Defined and delivered scalable technical solution architecture and integrated solution involving Salesforce clouds, preferably Financial Cloud. Demonstrated an understanding of integrations with third party systems through a variety of integration patterns (ESB, Pub/Sub, Point to Point, Batch, Singleton, etc.) and Salesforce capabilities (Soap, Rest, Platform Events, Streaming APIs, etc.). Preferred Qualifications Proven ability to communicate and articulate technical information across various organizational levels. Experience working in geo-dispersed team environments. Ability to negotiate or persuade others in moderately complex situations Note: Applicants for employment in The USA should possess work authorization which does not require sponsorship by the employer for a visa

Experienced Journeyman Excellent Benefit Package Shift: Monday through Friday 7am-3:30pm with Overtime possible Hourly Rate: 25.00 to 30.00 per hour depending on experience Requirements: You must be 18 years old. For safety reasons, you must be able to speak English or Spanish A pre-employment drug screen (Excluding THC) and criminal background check are required. Able to lift up to 30lbs. Willing to climb ladders up to 80 feet Valid Driver's License (Preferred) Job Duties: As you might expect, cleaning is at the heart of what your job will entail. For the most part, you'll be: Cleaning Windows - High Rise Power washing High bay dusting Gutter cleaning Why Join the Marsden Family? Final Touch Window Cleaning, is a Marsden Holding Company, is a facility services provider with an unmatched reputation for operational excellence. We clean, sanitize, and service large and small businesses across the United States. Room to Grow Jobs are Classified as Essential Flexible Work Schedule DailyPay: access your pay when you need it AAP/EEO Statement Marsden is an Equal Opportunity Employer. Marsden does not discriminate against any employee or applicant for employment due to race, age, sex, creed, ancestry, disability, sexual or affectional orientation, marital, or veteran status, color, religion, national origin, status with regard to public assistance or any characteristic protected under federal, state or local law. Journeyman Window Cleaner at Final Touch, LLC

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment. Carpentry Contractors Company, a Division of US LBM is seeking a Framing Carpenters for jobsites around the Twin Cities area. Schedule: Mon-Fri: 7:00AM - 4:30PM Wage: $20.00 - $30.00 per hour based on experience. A Brief Overview The Carpenter is responsible for performing carpentry tasks. This person will perform a variety of tasks in an assigned area as they construct, repair, restore, and install structural woodwork and related materials. What you will do Adhere to established safety rules and regulations by passing safety test and following all safety procedures; maintain a safe and clean environment. Communicate well with crew and foreman; follow directions provided by lead carpenter or foreman; and prioritize daily duties. Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required. Provide required personal tools. Measure, calculate, and mark cutting lines on materials accurately, using ruler, pencil, chalk, and marking gauge; shape or cut materials to specified measurements, using hand tools, machines, or power saw. Square walls and install sheathing correctly. Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue; install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools. Select and supply crew, carpenters and leads with materials. Use proper nailing procedures for all applications. Use hand, pneumatic and other power tools to measure, cut and install sheathing for wall and roof, and all wall components. Finish, inspect and ensure work complies with quality standards and expectations. Keep jobsite clean and safe. Comply with Company's attendance policy by maintaining regular and predictable attendance. Education Qualifications High School Diploma or GED required. completion of an apprenticeship program, certificate or degree program at vocational school or community college (e.g. Certificate of Achievement in Carpentry Technology, an Associate of Applied Science in Carpentry-Building Trades or an Associate of Applied Science in Carpentry) preferred. Experience Qualifications less than 1 year of carpentry experience in the commercial and/or residential sectors required. Skills and Abilities Knowledgeable of the standard methods, practices, principles, tools, and equipment used in the carpentry trade and its associated occupational hazards. Knowledgeable of the qualities, adaptability, and use of various woods and materials. Basic knowledge of state codes and procedures including energy codes. Must have good work ethic, attitude and be reliable. Solid basic math skills are necessary. Communicate, read, comprehend, and comply with Company's policies and procedures including safety and security. Understanding and commitment to a safe work environment in this "safety sensitive" position. Must be able to pass Safety test and follow all safety procedures. Available for overtime as needed. Licenses and Certifications DL NUMBER - Driver License, Valid and in State along with reliable transportation required. Additional Potential Opportunities based on experience: CARPHELP - Carpenter Helper LEADCARP - Carpenter Lead US LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Job Title: Construction Senior Project Manager The Company: Terra Construction is a leading Twin Cities construction firm recognized for excellence as a Minnesota-based commercial builder which has been honored to be named one of the Minneapolis St. Paul Business Journal's "Best Places to Work". Terra delivers construction management, general contracting, design-build, and tenant improvement services to the municipal, education, corporate, retail, healthcare, and industrial sectors. We are a high-energy team committed to collaboration and fostering a positive work environment. We value honesty, open communication, and respect, all while having fun together. Do you have the desire to be part of something special? Join Team Terra and experience our unique company culture. Apply now! The Position: Terra is currently seeking an experienced Senior Project Manager (SPM) with a background in commercial construction to join its Team. Healthcare and/or tenant interiors experience is preferred. Position Summary: The SPM is responsible for leading, planning, directing, and coordinating activities of multiple complex construction projects or a project portfolio, ensuring successful delivery aligned with Terra's standards and client expectations. Responsibilities include preconstruction leadership, strategic budgeting, team oversight, and client management, from estimating through closeout. Essential Duties and Responsibilities: Lead all phases of construction projects-from preconstruction through completion-across multiple job sites. Prepare budgets, detailed cost estimates, bids and proposals to ensure project and client goals are achieved. Complete pre-bid site inspections and lead proposal strategy for competitive advantage. Draft and negotiate owner and subcontractor contracts; oversee submittals, RFIs, and other key documentation. Strategically procure trade contractors, suppliers, and materials, balancing quality, cost, and schedule. Prepare and lead meetings with internal and external stakeholders; ensure meeting notes and actions are documented and executed. Track and drive progress against construction schedules; implement corrective action as needed. Apply Lean Construction principles to promote efficiency and reduce waste. Ensure timely inspections, permitting, and final approvals; secure Certificate of Occupancy. Review and analyze project reports (progress, financials, risks, forecasts); make strategic decisions to optimize performance. Serve as the primary liaison for client communication; foster long-term relationships built on trust, service, and results. Oversee project teams, including PMs, APMs, engineers, and superintendents; mentor and develop junior team members. Lead change management process, including negotiation of cost and time impacts. Ensure compliance with Terra's Safety and Quality programs and policies. Drive project closeout and client satisfaction; prepare turnover documentation and facilitate final walk-through. Support business development and preconstruction pursuits, including interviews and proposal input. Perform other duties as assigned. Required Knowledge, Skills, and Abilities: Proven capability of independently managing multiple complex and impactful commercial projects. Strong leadership capabilities, including team building, mentorship, and talent development. Expertise in cost control, risk mitigation, value engineering, and contract negotiation. Strategic thinker with the ability to balance project details with broader business goals. Strong interpersonal and client-facing skills; comfortable in high-level presentations and negotiations. Proficiency with Microsoft 365, Microsoft Project, Procore (required); knowledge of CMIC (preferred). Demonstrated ability to foster a culture of safety, integrity, quality, and accountability. Effective at managing up and across departments; contributes to continuous improvement efforts. Deep understanding of project financials and ability to maximize profitability across a portfolio. Education and Experience Requirements: Bachelor's degree in construction management, construction engineering, civil engineering, or equivalent education and experience sufficient to perform the essential duties of the job. 10+ years of related experience managing commercial construction projects, including leadership on complex projects with a proven record of successful outcomes. Preferred Knowledge, Skills, and Abilities: Proficient in Procore and familiar with CMIC software. OSHA 10 or 30 training. First Aid and CPR certified. PMP Certification. Experience with Lean Construction and continuous improvement methodologies. Other: Valid Driver's License and reliable transportation, ability to maintain a satisfactory Motor Vehicle Record, and ability to adhere to Terra's Vehicle Policy. Travel and temporary relocation to project sites within Minnesota may be required. Physical Demands: The physical demands described are representative of those that must be met by any employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential functions include items such as ability to: Clearly communicate information (both written and verbal) to colleagues and key stakeholders Stand and/or sit in a stationary position for extended periods of time; 50%+ Use a computer/laptop/iPad in open office environment with natural and/or florescent lighting Travel to and navigate between building floors of tenant spaces and job sites and attend off-site meetings Lift up to 50 lbs. unassisted Why Team Terra? Our friendly atmosphere and generous benefits package make us a wonderful place to work. Terra offers full-time employees the benefits listed below and more: Competitive Pay Responsible Unlimited Flexible Time Off Nine Paid Holidays Workplace Flexibility Medical Insurance Plan Options, Terra pays 100% of Employee Premium 401(k) & Roth Plans with Employer Matching Dental & Vision Plans Health Savings Account (HSA) & Limited Flex Spending Account (FSA) Employee Assistance Program (EAP) Company sponsored Short and Long-Term Disability, Life/AD&D Insurance Paid Parental Leave Paid Military Leave for Active Reserve Duty Along with our employer sponsored plans, we also offer an array of Voluntary Benefits and other perks. In addition to our generous benefits package, the salary range for this position is $120,000 to $175,000. Your final base salary will be determined by several factors, including skills, education, and experience. While compensation will be based on individual qualifications, most offers would not be at the top of the scale. We also prioritize pay equity among our team members when making final compensation decisions. Terra is a Drug-Free Workplace and requires all new hires to complete a pre-employment drug and alcohol screen test, criminal background check, and motor vehicle report. Interested in joining Team Terra? Apply at *********************** or send resumes to ******************* for consideration. EEO Policy: Terra is an equal opportunity employer and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Reasonable Accommodation Notice: In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation to apply for a position, please email **************. Reasonable accommodation will be determined on a case-by-case basis. Eligibility: Positions require verification of employment eligibility to work in the U.S. Terra does not accept recruiting agency solicitations.

Job Description Are you a seasoned curtainwall designer looking to take the next step in your career? Enclos is seeking a skilled and motivated Fabrication Lead to join our engineering team and help drive excellence across some of the most complex facade projects in the industry. This is a key lead role for someone who thrives at the intersection of design, fabrication, and technical problem-solving-guiding project drawing packages, mentoring designers, and ensuring quality at every stage. If you're ready to use your expertise to influence project outcomes and help shape the next generation of curtainwall talent, we'd love to connect. Position Overview: The Fabrication Lead position at Enclos is a highly technical and hands-on role responsible for guiding a team of curtainwall designers and technicians through the full lifecycle of project design. This role oversees quality assurance and drafting standards, coordinates complex project drawing packages, and serves as the critical link between design intent and fabrication, assembly, and installation. The Fabrication Lead mentors junior team members, provides technical guidance, identifies design changes, and supports collaboration with engineering, field, and fabrication teams. This position requires advanced drafting experience, proficiency in CAD and modeling tools, and the ability to lead, problem-solve, and communicate effectively across project stakeholders. Essential Duties and Responsibilities: Trains and mentors Curtain Wall Technicians, Designers I, and Designers II. Oversees and coordinates Quality Assurance/Quality Control policies for engineering team subordinates. Coordinates a portion of a projects drawings (plans, elevations, details, embeds, layouts, tag, unit, parts, take-offs, 3D, dies, etc.) Identifies design and scope changes and communicates changes to System Designer. Identifies requests for information (RFI's) re: design and scope changes. Assists in reviewing and interpreting rough sketches, drawings, specifications, and other engineering requirements received from Professional Engineer, and helps to ensure that revisions are incorporated into the production, fabrication, and field drawings. Understanding the design impact through the lifecycle of a project. Can anticipate how the design will be fabricated, acquired, assembled, shipped, and installed. Provides feedback regarding project to System Designer or TPM. Participates in mock-up activities (fabrication, assembly, and testing) as required by the Operations Project Manager. Participates in performance reviews of engineering team subordinates. Reads and interprets project architectural drawings and specifications to determine best systems, designs and components to be used for production drawings. Interprets project specifications, contract, cost estimate, and contract drawings. Accurately evaluates time required to complete an assignment. Ensures that assigned team complies with company policies regarding CAD and drafting standards, as well as safety and security procedures. Provides assistance to field, shop, or vendors. Qualifications: Associate's degree in Architectural Drafting, Engineering, or related field. 5-10 years of curtainwall drafting experience. Ability to coordinate a small group of subordinates, and delegate work as needed. Ability to communicate effectively both orally and in writing. Ability to use CAD, Word Processing, spreadsheet, Email and Internet software. Proficiency in at least two of the following programs: AutoCAD, Revit, Inventor. Ability to perform and/or coordinate work of subordinate team members (Curtainwall Technician, Designer I & Designer II) within a project. Ability to solve problems involving several well-defined variables in standardized situations. Knowledge of advanced drafting techniques and modifications of theories, precepts, and practices of the curtainwall field. COMPENSATION At the Enclos Family of Companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Fabrication Lead role in Minneapolis, MN can expect to earn $65,000 to $85,000 per year. This position is also eligible to participate in the company's incentive bonus plan. Benefits include, and are not limited to: 401(k) plan with company match Medical, dental, prescription, vision coverage Tax-advantaged accounts for healthcare expenses Flexible time off and paid holidays Paid parental leave Career growth and nationwide career opportunities Equal Opportunity Employer Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law. Job Posted by ApplicantPro

Ulland Brothers, Inc., is a Civil/Highway-Heavy, aggregate and site development contractor with offices in Carlton, Virginia and Albert Lea, MN. Ulland Brothers has operated in the construction industry for over 100 years. Ulland Brothers is looking for a career-minded and safe Operator to work full time from approximately mid-April to November or more in Southern Minnesota. The work requires being away from home periodically. This is a union position. Operating Engineer #49 This is a safety sensitive position. PRIMARY JOB DUTIES: Operates various types of power construction equipment including but not limited to: rubber-tired backhoe, loaders, rollers, graders, excavators, etc. to excavate or move and place dirt or materials during the course of construction. SKILLS & EXPERIENCE: Minimum of 2 years' operating experience. Good ability and knowledge in the operation and maintenance of such equipment as listed above. Operation requires adjusting handwheels and depressing pedals to drive machines and control attachments such as blades, buckets, scrapers, and swing booms. Controlling levers and pedals on assigned equipment to lower bucket or scoop up material. Required to perform maintenance duties such as cleaning, greasing, and oiling machines. Requires ability to read and understand blueprints. CDL helpful. ESSENTIAL ACTIVITIES: This position requires operating equipment in a safe manner. It is a requirement to follow instructions and meet set standards and to judge distances and slopes accurately. This is inside and outside work in all types of environments, conditions, weather, and seasons. Appropriate personal safety equipment is supplied. This is medium duty work requiring lifting, climbing and sitting. Crouching, or stooping and bending, full use of hand, arms, and legs and eye-hand coordination is essential. Reaching and feeling, overhead lifting, and repetitive motions are required: Talking and hearing; good eyesight (either naturally or with correction); and color discrimination are essential to satisfactory performance. Due to the nature of the position, an Operator may be required to perform other duties throughout the course of a workday. Regular and timely attendance is essential, and hours must conform to the company's operating hours. DRUG TEST REQUIRED. Ulland Brothers is proud to be an equal opportunity employer that strongly encourages Women, People of Color, LGBTQ+ individuals, people with disabilities, and Veterans to apply. All aspects of employment will be based on merit, competence, performance, and business needs without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status, or any other protected class. We are committed to creating an inclusive environment for all employees. Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

CTI has been a leading AV provider for over 35 years. Since we began in 1988, our mission has been simple: to provide a fantastic customer experience. At CTI, our biggest asset is our people, and we know that sometimes the most awesome employees don't fit the typical mold. If you are hardworking, friendly, and know the importance of fantastic customer service, you could be a good fit at CTI. We have developed a collaborative and lively working environment, where the best and the brightest show up to work each day ready to have fun, and employ their passion for and knowledge of technology into everything they do. This creative atmosphere helps us apply and share our skills with our clients, who seek quality, high-end AV and Conference Solutions. So, what are we looking for? We are looking for an AV Project Manager for our Minneapolis branch whose attitude, skills, and work ethic will embody our mission “to provide a fantastic customer experience”. Somebody who is passionate about AV, a dynamic and highly organized self-starter, and isn't afraid of rolling up their sleeves in order to get the job done on time. They can handle all aspects of successfully executing AV integration projects, but aren't micro-managers. They know how to delegate responsibilities efficiently and their written and verbal communication skills are second to none. If this sounds like you, we will provide the necessary training, support, and work environment to help you succeed. We take pride in our employees, who are known in the industry as customer focused problem-solvers who can get the job done. What are your responsibilities? -Act as a liaison between client and technical operations staff -Effectively communicate deadlines, specifications, and budgets to A/V install team. -Assist A/V install staff with project completion, including installation, programming, and punch lists. - Other tasks as assigned Will you fit in? -Our employees fearlessly embrace the company culture and applicants who merely want to punch in their timecards everyday are not what we are looking for. -You can work independently with minimal guidance, but aren't afraid to ask the right questions when you need help. -You have strong verbal and written communication skills, and can be the face of our company to our clients. Does experience count? - Education : Associates degree is preferred, but not required. We take into account your experience/skill level and what you bring to the table as an individual. -Customer Service Experience : A must! As you can see our customers are #1 and we need someone who can take care of them. -Attitude and Aptitude : Are key! We need someone who is eager to learn and comes to work ready to tackle any situation. -Communication : Very important! You will be working and communicating with clients, and different departments within the company. Lines of communication must be clear, concise, and open, in order for the process to run smoothly. - A/V Install or Project Management : 1-2 years minimum. Knowledge of the industry is preferred, however not required, as you will be the main POC for our clients and employees, while the AV/Conference solution is being implemented. What's in it for you? At CTI, we know our company's success is directly correlated to the success of our employees. So it's fitting that we thrive on and encourage employee growth, both professionally and personally. Our competitive compensation package includes: -A competitive base salary $60k-$110k (DOE) -Employer matched medical and dental insurance (available after 60 days of employment) -Employer matched 401K up to 3% (after 6 months of employment) -Bonus eligibility that is based off a results oriented incentive plan (after 6 months of employment) -A graduated PTO program, all major holidays off, as well as three “floating” holidays, available upon first day of employment -Special gifts for significant life events, such as marriage, the birth of a child, and buying a house. -Cell phone reimbursement plan. -Long and Short Term Disability 100% paid by CTI. CTI is an equal opportunity employer. We do not and shall not discriminate on the basis of race, color, religion, gender, age, national origin, disability, marital status, sexual orientation, or military status in any of its activities or operations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire

Department Manufacturing Locations Otsego - 105 Hourly/Salaried Hourly Oracle Department Otsego-Reliability|USG Paper, LLC|USG Business Group Oracle Job Title MFG. Summer Hire. . ||USG

Rice Companies is looking for a Steel Erector to join the team at our Glencoe, MN, location. Our Steel Erectors are responsible for successfully performing Pre-Engineered steel building erection for our projects. Steel Erectors spend their time on a variety of tasks including: * Setting conventional steel * Installing metal wall and roof panels * Placing building insulation * Metal trim and flashing installation. * Installing metal doors and hardware * Additional Responsibilities may include some rough carpentry and selective demolition. Qualifications: * Ability to receive direction and work with and without supervision * Demonstrated skill in the use, care, and safety of basic carpentry and power equipment * Previous experience in commercial steel/metal building erection is strongly preferred. * Experience reading and interpreting blueprints * Proficient in the operation of equipment (scissor lift, forklifts, boom lifts, skid steer, etc.) Certification preferred. * Confidence to work at heights * Awareness of health and safety guidelines * Good team working skills. Our Ideal Candidates Are: * Humble * Hungry * Smart We Value: * Family First. We work to create an atmosphere where our employees and their families can thrive. * Relationships. We build partnerships, not projects. Our goal is to earn our clients unwavering support to work with us again and again. * Accountability. We believe in being held accountable to our clients and each other. * Innovation. Our culture is built on taking risks, challenging the status quo, and expecting more. * Collaboration. We focus on adding services, people and technology that enables us to work together to constantly be better for our clients. Benefits: With competitive pay, family-forward benefits and a little fun mixed in, Rice Companies works to build a team that's second to none. * Medical and Dental Insurance (Select Employee-Only Premiums are 100% Company Paid) * Life Insurance * 401K w/Employer Match * Paid Time Off (PTO) * Paid Holidays * Career Training and Development Successful candidates will be subject to post-offer, pre-employment screenings which may include: * DOT Medical Card exam * Position based Fitness for Duty exam * Non-DOT drug screening * Criminal Background Check Basic Tools are required to be supplied by each individual field employee. Rice Companies supplies all power tools, shirts, and safety equipment. Overnight Travel (Monday - Friday) is required on a per-project basis. The anticipated hourly wage range for this role is $22-$30 per hour based on experience.

Job DescriptionIf you are a handyman, you understand how important it is to be versatile. If you are able to adapt and change to many different activities, you might be the right fit for this job. Handyman Connection of Eden Prairie is seeking an experienced handyman for residential and light commercial work. Our customers love us! One happy customer recently said, "We had Handyman Connection out to do work on our stairs and couldn't be happier with the end result! Our stairs are fully finished and matched our floors perfectly. Great craftsmanship, and done at a great price! I will recommend to friends and family for their home improvement needs! Thank you again!" Benefits: Make anywhere between $25-$50/hour plus bonuses! Professional office support regarding scheduling, customer support and job tracking Free access to custom mobile application for scheduling and communications Successful marketing campaign that brings us well-qualified customers Branded apparel and signage Serve the great people of Eden Prairie and the surrounding area Make a difference in others lives. Become a Handyman for Residential/Light Commercial today. Job Summary: Provide basic construction skills for residents and businesses in Bloomington and the surrounding area. Bid work and produce it with great satisfaction. Effectively communicate with clients and suppliers. Job Requirements Skill in multiple areas: General Carpentry - Rough and Finish Bathroom Upgrades / Remodel Kitchen Refresh / Remodel Painting Interior and Exterior Drywall Repair / Patching / Caulking Minor Plumbing and Minor Electrical Knowledge Flooring Repair and Installation Handyman, General Home Repairs and Maintenance Work Great customer service and client relations Basic knowledge of building codes Must have current driver's license and insurance Must have tools, work vehicle and good references Must have experience in the remodeling or home repair trades Must pass screening process which includes a background check Independent contractors must carry liability insurance and workers comp Must have a smart phone and access to the Internet Apply today to become our next Handyman!

60%: CDL Driver: Operates company toters to transport products to and from specified locations. Works directly with consumers. Other duties may be assigned based on business needs of location. DOT certification required or attainable. 40%: Installation: Installation & anchoring of units. Pick up units to be returned to the branch. Essential Duties and Responsibilities: CDL Driver: Responsible for ensuring truck is loaded properly. Responsible for weight of shipment. Monitor and evaluate daily load schedule. Coordinate with other drivers Ensure truck is current and proper on all inspection criteria. Comply with all DOT requirement Record completely and accurately all timesheets and loads hauled/transferred completely and accurately. Report all loads to supervisor daily. Maintain truck in good working order. Daily fill out Driver's Vehicle Inspection Report per DOT regulations. Daily fill out Vehicle Inspection Report and Driver's Daily Log and forward to Supervisor at end of day per DOT regulations. Assist work in yard as required by supervisor. Perform other duties as assigned. Installation: Install and anchor modular buildings and mobile trailers at customer location Retrieve modular buildings and mobile trailers from customer locations and return to yard. Performs other duties as required Required Skills and Qualifications: Class “A” Commercial Driver's License required. Clean MVR required. Ability to pass required background checks Education & Experience Requirements: High school diploma or equivalent. Twelve (12) months commercial driving experience required within the last three (3) years. Experience working in multiple climates including extensive snow, ice, heat, and rain. Basic mechanical skills to work on trucks Average ability to read and write to read location directions and prepare tickets and reports accurately. Good organizational skills Demonstrated knowledge and skills Physical/Mental Demands: Wears personnel protective equipment as required Physical and mental ability to operate oversize loads and all associated equipment Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Work Environment & Safety: Employee will work in a variety of environments including garage, work yard, in town driving, highway/freeway driving, construction site locations, etc. Must be able to perform task in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must be able to perform responsibilities in compliance with the company's safety practices. Must maintain a professional, responsible, and accountable attitude and must be able to perform task in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the venders to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is subject to the DOT Agency Regulations under FMCSA. It is classified as a safety sensitive position and, in addition to adhering to the Satellite Policy Substance Abuse and Drug-Free Workplace, this position is subject to the FMCSA DOT Agency Regulations and shall follow the DOT Controlled Substances and Alcohol Policy for Drivers. PM25

Mortenson is currently seeking an experienced Project Manager for our Data Center Structured Cabling Team with the ability to interact with a variety of staff at all levels in an ever-changing environment, remaining flexible, resourceful, proactive, and efficient with a high level of professionalism and confidentiality. Aptitude to anticipate problems, critical issues, and opportunities as they arise; along with the capability to creatively problem solve and bring together viable solutions. Excellent written and verbal communication skills are vital, with attention to detail equally important. The Project Manager will provide overall leadership direction to a project; including the management of project quality, timeliness, and safety, as well as mentoring the project team. Develop and enhance customer relationships by providing excellent service. Travel: 100% on a rotation Traveling Opportunities across the US Locations Include: LA, NM, WY, WI, IN RESPONSIBILITIES: Organization, flexibility, outstanding customer focus, and strong communication are critical in performing duties which include, but are not limited to: Manage the overall financial health of projects Support and potentially lead EPC contract negotiations with customers, including assembly of technical exhibits, the scope of work, and project schedules to align with contract requirements. Leading vendor procurement and bid/award phase for all major subs and suppliers. Including RFP creation, vendor solicitation, technical scoping, risk analysis, budget alignment, and contract negotiations. Develop and maintain project financial projections and equipment projections Determine and allocate project estimates into the financial system Determine cost codes, approve invoices, and make necessary budget management decisions Provide financial and billings to Accounting for timely payment Create monthly owner billings Manage subcontracts and suppliers for the project Oversee budget for and make selections of trade partners and suppliers Handle billings and contract management, including contract buyouts Manage Assistant Project Manager(s) and Project Engineer(s) Provide job assignments and manage career development Approve timecards for on-site team members Provide ongoing feedback on work performance Function as the main point of contact with the owner and on-site representative Assist with the review of the owner agreement Resolve site concerns for the owner or representative Provide frequent interactions and service to build positive relationships and future work opportunities Manage change orders Determine when to submit to the owner or on-site representatives Obtain the customer/architect's approval QUALIFICATIONS: Minimum six years of related previous experience Proven ability to assist with all responsibilities for complex projects Detail orientation sufficient to organize and manage multiple project tasks Possess a basic understanding of construction law and generally accepted business practices Preference for candidates with experience in one or more of the following: commercial construction, data center project development, EPC contracting, or emerging technologies. Microsoft Office, project and pertinent web application skills at an intermediate level Proven positive and professional attitude, and strong customer service skills Ability to interpret and communicate Mortenson policies Current driver's license Bachelor's degree in Construction, Civil, Mechanical, or Electrical Engineering or Construction Management, or equivalent experience Preferred: Minimum of four years field experience in a relevant low voltage industry Bachelor's degree in a related technical field or equivalent A few benefits offered include: (for Non-Craft & Non-Union Craft working 25+ hours / week) Medical and prescription drug plans that includes no additional cost vision coverage Dental plan 401k retirement plan with a generous Mortenson match Paid time off, holidays, and other paid leaves Employer paid Life, AD&D, and disability insurance No-Cost mental health tool and concierge with extensive work-life resources Tuition reimbursement Adoption Assistance Gym Membership Discount Program The base compensation range for this role is: $110,700 - $166,100 Actual range is higher for the following office locations: Denver, CO and Chicago, IL - 5%, Seattle, WA, and Portland, OR - 10%, Washington, D.C. - 12.5%) Base pay is positioned within the range based on several factors including an individual's knowledge, skill, and experience with consideration given to internal equity. Please make note: Visa sponsorship is not offered for this position. Our postings are typically open a minimum of 5 days and an average of 44 days. ABOUT MORTENSON As a top builder, developer, and EPC (Engineering, Procurement, and Construction), our expertise spans markets like sports, renewable energy, data centers, healthcare, and more. We are builders at heart, working to ensure the built environment has a lasting positive impact. Let's Redefine Possible Equal Employment Opportunity Your uniqueness brings new and creative perspectives to the team. Mortenson is committed to providing equal opportunities of employment (EOE) to all individuals, regardless of your race, religion, gender, national origin, age, veteran status, disability, marital status or any other legally protected category. Other Items to Note Mortenson reserves the right to hire any individual without legal or financial obligation on unwanted solicitations. No agency emails, calls, or solicitations are accepted without a valid agreement. Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B status, 0-1, TN, CPT, OPT, etc.). We are unable to sponsor or take over sponsorship of an employment Visa at this time. #LI-AH1 #LI-remote #IND-GNL #LI-CBL

Turner Industries Group is looking for experienced Boilermakers for maintenance and project work near the Saint Paul, MN area. 3 to 5 years experience Must be able to pass background check and drug screen No per diem or travel, local candidates preferred General Job Description: Assembles and disassembles, erects and repairs boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications. Functional Requirements: Locates and marks reference points for columns and plates on foundation; attaches rigging or signals crane operator to lift parts to specified position; aligns structures or plate sections to assemble boiler frame, tanks or vats; hammers, flame-cuts, files or grinds irregular edges of sections or structural parts to facilitate fitting edges together; bolts structures and sections together; positions drums and headers into supports or bolts supports to frame; aligns water tubes and connects and expands tube ends to drums and headers; bolts casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, catwalks, ladders, coal hoppers and safety hatch to frame; installs trays in process towers; installs manholes, valves, gauges and feedwater connection in drums to complete assembly of water tube boilers; assists in testing assembled vessels. Qualification Standards: • High school or equivalent • One to four years of experience in specified skill (depending on mechanic level) • Written pre-employment qualification test • Post-offer drug/alcohol screen and physical evaluation • Hazard Communication orientation/test • Turner Industries Group, LLC indoctrination • OSHA approved corrective eyewear (Z87) • Job site orientation • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) • Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) • Demonstrated proficiency in construction tool use (i.e. grinders, oxy/acetylene torch) • Rigging • National Certification preferred (may be required by client) • Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Tools/Equipment: Employee may be required to provide the following: tool box, crescent wrenches, tape, spud wrenches, hammer, tri square, striker, burning goggles, tip cleaners, work gloves, framing square, level, torpedo level, center punch, channel locks, set of combination wrenches, pipe wrench, hacksaw, rain suit Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Mental Involvement: May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions Work Environment Factors: • Location: industrial maintenance and construction sites • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT ****************************************** BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST Job Posted by ApplicantPro

Are you an experienced, motivated, and reliable pipe layer who knows how to work with water, sewer, and storm pipes? You will work in a challenging environment where every day poses a new task, which just means you will constantly have opportunities to learn more and expand your skillset. You will be responsible for assembling, connecting, and constructing pipe systems for storm sewers, sanitation sewers, drains, water mains and pipelines. Ulland Brothers, Inc., is a Civil/Highway-Heavy, aggregate and site development contractor with offices in Carlton, Virginia and Albert Lea, MN. Ulland Brothers has operated in the construction industry for over 100 years. This is a union position with great pay and benefits. This is a safety sensitive position. Responsibilities * Install sanitary, water main, and storm sewer structures and pipe systems. * Cut pipes to required lengths. * Assist in aligning pipes during pipeline construction. * Check slopes for conformance to requirements using levels or lasers. * Grade and level trench bases using tamping machines and hand tools. * Train others in pipe-laying techniques * Other general labor and construction related duties as required. * Perform additional assignments as requested including ongoing in person or online training. Requirements * Preferred work experience as a pipe layer * Knowledge of sewer systems, storm drains, and water mains * Good communication skills * The ability to comprehend and follow specific instructions. * Interpersonal competencies that include a drive for results, organization, planning, trust, respect, being dependable, and cooperation * Good housekeeping skills Drug testing required. Incomplete applications may not be considered. Ulland Brothers is proud to be an equal opportunity employer that strongly encourages Women, People of Color, LGBTQ+ individuals, people with disabilities, and Veterans to apply. All aspects of employment will be based on merit, competence, performance, and business needs without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status, or any other protected class. We are committed to creating an inclusive environment for all employees. Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

Rice Companies is looking for a Roofing Technician to join the team at our Sauk Rapids, MN, location. Our Roofing Technicians are motivated, have a background in commercial buildings and the ability to learn and take direction from our Lead Roofing Foreman. They often are performing jobs alone or in teams of two or more. Position Responsibilities: Steel Building Re-Roofing: * Installation or replacement of metal roofing panels * Repair or replacement of waterproof coating, vapor barriers, insulation, roofing trims, flashings, gutters, and other roofing accessories * Repair, replace and remove damaged building materials and debris * Inspect roofing for damages and perform any needed repairs * Clean rooftops by removing leaves, snow/ice and other debris Additional Responsibilities: * Dependable, punctual with the availability for overnight travel on a per project basis 40hrs + per week * Work outdoors in a variety of weather conditions * May also assist with setting conventional steel, installing metal wall panels, insulation, doors and hardware and other functions related to steel commercial framed buildings * Transportation of equipment and materials to and from the jobsite Qualifications: * Ability to receive direction and work with and without supervision * Demonstrated skill in the use, care and safety of basic carpentry and power equipment * Experience reading and interpreting blueprints a plus * Previous experience in commercial metal roofing /building installation, carpentry or related work * Experience with scissor lift, forklift, boom lift, and skid steer. Certifications a plus * Confidence to work at heights in a safe manner * Ability to sit, stand kneel, climb stairs, ladders and carry roofing materials to work area * Training provided Benefits: With competitive pay, family-forward benefits and a little fun mixed in, Rice Companies works to build a team that's second to none. * Medical and Dental Insurance (Select Employee Only Premiums are 100% Company Paid) * Life Insurance * 401K w/Employer Match * Paid Time Off (PTO) * Paid Holidays * Career Training and Development Successful candidates must successfully pass pre-employment screenings which may include: * DOT Medical Exam * Position based Fitness for Duty exam * Non-DOT drug screening * Criminal Background Check The anticipated hourly wage range for this position is $22 - $30 per hour depending on experience. Basic Tools are required to be supplied by each individual field employee. Rice Companies supplies work vehicle, all power tools, shirts and safety equipment.

Are you a seasoned curtainwall designer looking to take the next step in your career? Enclos is seeking a skilled and motivated Fabrication Lead to join our engineering team and help drive excellence across some of the most complex facade projects in the industry. This is a key lead role for someone who thrives at the intersection of design, fabrication, and technical problem-solving-guiding project drawing packages, mentoring designers, and ensuring quality at every stage. If you're ready to use your expertise to influence project outcomes and help shape the next generation of curtainwall talent, we'd love to connect. Position Overview: The Fabrication Lead position at Enclos is a highly technical and hands-on role responsible for guiding a team of curtainwall designers and technicians through the full lifecycle of project design. This role oversees quality assurance and drafting standards, coordinates complex project drawing packages, and serves as the critical link between design intent and fabrication, assembly, and installation. The Fabrication Lead mentors junior team members, provides technical guidance, identifies design changes, and supports collaboration with engineering, field, and fabrication teams. This position requires advanced drafting experience, proficiency in CAD and modeling tools, and the ability to lead, problem-solve, and communicate effectively across project stakeholders. Essential Duties and Responsibilities: * Trains and mentors Curtain Wall Technicians, Designers I, and Designers II. * Oversees and coordinates Quality Assurance/Quality Control policies for engineering team subordinates. * Coordinates a portion of a projects drawings (plans, elevations, details, embeds, layouts, tag, unit, parts, take-offs, 3D, dies, etc.) * Identifies design and scope changes and communicates changes to System Designer. * Identifies requests for information (RFI's) re: design and scope changes. * Assists in reviewing and interpreting rough sketches, drawings, specifications, and other engineering requirements received from Professional Engineer, and helps to ensure that revisions are incorporated into the production, fabrication, and field drawings. * Understanding the design impact through the lifecycle of a project. Can anticipate how the design will be fabricated, acquired, assembled, shipped, and installed. * Provides feedback regarding project to System Designer or TPM. * Participates in mock-up activities (fabrication, assembly, and testing) as required by the Operations Project Manager. * Participates in performance reviews of engineering team subordinates. * Reads and interprets project architectural drawings and specifications to determine best systems, designs and components to be used for production drawings. * Interprets project specifications, contract, cost estimate, and contract drawings. * Accurately evaluates time required to complete an assignment. * Ensures that assigned team complies with company policies regarding CAD and drafting standards, as well as safety and security procedures. * Provides assistance to field, shop, or vendors. Qualifications: * Associate's degree in Architectural Drafting, Engineering, or related field. * 5-10 years of curtainwall drafting experience. * Ability to coordinate a small group of subordinates, and delegate work as needed. * Ability to communicate effectively both orally and in writing. * Ability to use CAD, Word Processing, spreadsheet, Email and Internet software. * Proficiency in at least two of the following programs: AutoCAD, Revit, Inventor. * Ability to perform and/or coordinate work of subordinate team members (Curtainwall Technician, Designer I & Designer II) within a project. * Ability to solve problems involving several well-defined variables in standardized situations. * Knowledge of advanced drafting techniques and modifications of theories, precepts, and practices of the curtainwall field. COMPENSATION At the Enclos Family of Companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Fabrication Lead role in Minneapolis, MN can expect to earn $65,000 to $85,000 per year. This position is also eligible to participate in the company's incentive bonus plan. Benefits include, and are not limited to: * 401(k) plan with company match * Medical, dental, prescription, vision coverage * Tax-advantaged accounts for healthcare expenses * Flexible time off and paid holidays * Paid parental leave * Career growth and nationwide career opportunities Equal Opportunity Employer Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law.

Floor Coverings International is the #1 flooring franchise in North America. Our unique shop-at-home model allows customers to get perfect new floors without ever leaving their home. Our 350,000+ customers give us an average 4.7 star rating. That's a big reason why we're growing six times faster than our competitors and why we have an immediate need to hire hard-working, service-minded individuals who love to have fun. We're part of America's Largest Property Services Company, FirstService Brands! Flooring installers are the front line of Floor Coverings International, executing on our quality and craftsmanship at each job. Our install teams leave the lasting impression that determines our success. We respect the customer and their home, we deliver what we promise, and we clean up. Key Responsibilities: * Prep and install the flooring in steps according to company's procedures with high attention to detail and care * Keep tools organized and clean and maintain a safe and clean work environment * Understanding the scope of work of the project before you get there and familiarize yourself with the project file * Responsible to properly handle company machinery and power tools * Knowledge of units of measurement and able to complete simple math calculations * Interact with customers in a friendly and polite manner, must be trustworthy and comfortable in a customer's home * Ensure high quality company standards are met every time * Work to ensure a high level of customer satisfaction with every aspect of the job * Job requires travel throughout the week Qualifications: * 5 years in flooring installation * Valid driver's license and functioning vehicle * Ability to lift 50 - 75 lbs repeatedly * The position requires repetitive crouching, squatting, standing, walking and lifting * This position travels to various work locations throughout the week