Nucor jobs in Lansing, MI

BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Schedule: Monday - Friday 2:30am 6am start time May occasionally have an over night shift Our delivery drivers start at $31.23 hour. After completion of probation period, wage increases to $33.73 hour! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.23 and $33.73 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.

Troy Center is hiring an in-person MDS Coordinator in Troy, NY. Completing accurate assessments, MDS & care plans as assigned Initiating care plans and supporting activities as assigned Creating and distributing monthly care plan calendars in a timely fashion Maintaining & updating all care plans and assessments as required Monitoring & auditing clinical records, ensuring accuracy & timeliness Informing DON of persistent issues related to non-compliant documentation Protecting the confidentiality of Resident & Facility information at all times REQUIREMENTS: MUST HAVE PRIOR MDS 3.0 EXPERIENCE Valid New York RN License Long Term Care Experience Required! Must be highly organized, professional & motivated Should have solid computer skills Excellent communication skills Should be friendly and a team worker About us: Troy Center for Rehabilitation and Nursing is an 80-bed rehabilitation and skilled nursing facility located in the South Troy section of the city, minutes away from the eastern bank of the Hudson River. It's a homey, welcoming, well-maintained facility, providing a warm and nurturing environment. Our staff is committed to ensuring the highest quality of life for all our residents, helping each to get stronger, healthier, and happier. We want all residents to leave Troy Center with dignity and independence. Troy Center is a proud member of the Centers Health Care Consortium. Equal Opportunity Employer -M/F/D/V

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc... Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications Legal to work in the US without the need of a Visa sponsorship Must be 18 years or older 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Manage day-to-day HR operations. Support supervisors and managers, providing HR advice regarding policies and procedures. Plan and ensure facilitation of training, coordinating training schedules. Ensure compliance with required annual training. Ensure compliance and practices of company's basic upward and downward communication promoting a work environment of trust and goodwill. Assist with retention initiatives, focusing on enhanced orientation and job training. Audit HR functions, ensuring compliance with Company policies and guidelines. Conduct investigations ensuring complaints are recorded and properly maintained. Promote community relations throughout the community. All other relevant duties to the job. High School Diploma required; Bachelor Degree in HR, Business or other closely related field preferred. 4+ years HR, employee engagement and relations experience; preferable within a similar manufacturing environment. Excellent communication and interpersonal skills. Excellent knowledge of federal and state employment law (i.e., Title VII, EEOC, ADAA, FMLA, etc.). Excellent conflict resolution skills. Strong technology and computer skills. Organized with attention to detail.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26071 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Determine the best method to manage and complete a project by a designated due date. • Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. • Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. • List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. • Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. • Coordinate work assigned through various auxiliary work centers and equipment as required • Occasionally assist operators and maintenance with machine or processing issues. • Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. • Effectively communicate with other personnel and educate apprentices in best practices. • Adhere to all written specifications and ensure compliance with all standards. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: • Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. • Must pass the skilled trades assessment test for this position • Proficiently operate all common machining equipment, mills, lathes, grinders, etc. • Work as a team lead as well as a team member depending on the departmental workload. • Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Time management skills and the ability to work to deadlines in a fast-paced environment. • Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. • Work from design prints, sketches, sample parts and oral instructions. • Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. • Personally possess basic inspection and machining tools to effectively perform job. • Available to work second shift, overtime and weekends as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

. Supervise immediate and short-term maintenance goals. Assign work orders and ensure completion of repairs. Perform lock out/tag out certifications on equipment. Recognize and reward Technicians, while counseling performance issues. Perform safety checks. Provide mentorship, motivation, training and professional development, helping your team to optimize their performance and growth. Assign work orders, and follow up ensuring completion. Manage and oversee required paperwork. All other relevant duties to the job. 3+ years supervisory experience within a manufacturing maintenance environment required. 5+ years maintenance experience in a manufacturing environment required; preferrably within a poultry manufacturing facility. Excellent leadship skills with ability to provide positive reinforcement.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Purpose and Impact The General Laborer I, will perform routine and repetitive physical production and warehouse responsibilities following established policies and procedures with frequent guidance. In this role, you will support production operations while following all food safety and regulatory polices as required. Job Location: Harrisonburg, VA Job Type: Full Time Shift(s) Available: 1st (6AM-6PM); hours may vary depending on business needs Compensation:$20.29/hr Benefits Information • Medical, Dental, Vision, and Prescription Drug Insurance • Health and Wellness Incentives • Marathon Health Clinic (Employer sponsored health center) • Paid Vacation and Holidays • 401(k) with Cargill matching contributions • Flexible Spending Accounts (FSAs) • Short-Term Disability and Life Insurance • Employee Assistance Program (EAP) • Career Development and Tuition Reimbursement • Employee Discounts Principal Accountabilities Perform repetitive tasks. Examples include: • Properly administering and completing the vaccinations based on the Breeder Managers vaccine protocol, and other duties as assigned. • Follow all Cargill safety, ergo, and departmental policies. • As is live production, weekend work may be required, and start/stop times will vary based on the needs of the live production facility they will be at. Required Qualifications • Must be eligible to work in the United States without visa sponsorship • Must be 18 years or older • Ability to read, write, and speak English • Ability to work in a hot to cold indoor/ outdoor environment • Must be willing to work flexible hours and work some weekends to cover other shifts Preferred Qualifications • Previous production/feed mill experience • Previous Cargill experience • Work history in the past 12 months Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

THIS IS A 2ND SHIFT POSTION. Deliver feed between feed mills, growers and other required destinations. Perform pre-trip inspections to ensure the safety of your loads. Comply with established Company fueling procedures. Communicate with dispatchers on a regular basis. Comply with DOT, company, biosecurity, FSMA, local, state and federal laws, policies, practices and procedures. All other relevant duties to the job. Class A Commercial Driver's License required. 1+ year(s) verifiable commercial driving experience required. Clean motor vehicle driving record required.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($39,624.00 - $57,408.00) Target Bonus: % Req ID: 27507 Summary Are you interested in working with custom automotive builds? Do you have mechanical experience you want to put to the test? Are you looking for an exciting & rewarding career with a global industry leader? Vanair, a Lincoln Electric company, has been an industry leader for 52 years, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. What You Will Do As an experienced Truck Upfitter/ Equipment Installer, you will deliver outstanding products to customers who have trusted our brands for decades. If you like being challenged, want to be a part of the company's expansion, and are looking for personal development and growth, then we're looking for you! You will install various types of truck bodies, Mobile Power Systems , lighting packages, graphics, and other equipment to complete new custom builds for the work truck industry. You will work alongside some of the best in the business and will drive business growth. Education & Experience Required Vocational Training and 3+ years relative experience required; or GED with 3+ years in related field (does not require a university degree). Experience in automotive repair or vehicle upfitting is a plus. Must be able to read and interpret prints, electrical schematics and work orders Must be able to perform good mechanical and electrical assembly including troubleshooting any related issues. Must understand the use of all production equipment. Must be familiar with and understand all procedures and specifications relating to assembly, testing. This includes Process Control, Inspection and Testing, Inspection and Test Status, Must have the ability to lift up to 60 pounds; bend and lift containers. Must have the ability to operate cranes and fork trucks safely and responsibly. Must have the ability to properly adjust Volts/WFS, and weld with a MIG welder. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

HIRING FOR 1ST AND 2ND SHIFTS AT THE PREPARED PLANT. Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27825 Job Responsibilities Position Summary: Assist Electrical Project Engineers and Designers in completing their assigned tasks. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Focus on design and development. Position responsibilities: • Component and/or schematic drawing creation. • Assist in creating and assembling Service Manuals. • Revising and updating of drawings. • Provide technical assistance to Estimating, Sales, Production and Service as required. • Provide assistance to other departments (Service, Shop, etc.) as required. • Work well with Machine Builders/Electricians, Management, and support functions. Job Requirements Essential skills and experience: • High School Degree or GED or attending skills trade school. • Pursuing a Technical or Bachelor Degree • Commitment to company values • Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential skills and experience: • Safety (OSHA STDS) Environmental, Health & Safety (EH&S) • Understand the Company's EHS Policy and how it relates to this job. • Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Work in a safe and environmentally friendly manner and observe all company EHS procedures. • Know that the company EHS procedures are located on the ISO drive. • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. • Attend required EHS training Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Job Details Division: Nucor Rebar Fabrication Midwest Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Short Description Detail commercial and civil projects as it pertains to the supply and installation of rebar. Basic Job Functions: Must adhere to Nucor Rebar Fabrication's safety programs and standards. Demonstrate conduct consistent with Nucor Rebar Fabrication's vision and values. Continue developing knowledge of industry reference material (i.e. CRSI and ACI manuals). Verify drawings, dates, specifications, addenda and other contractual information from the routing sheet or directly from the business system. Working with supervision, begin detailing more complex projects (i.e. jobs with columns, beams, one- and two-way slabs, and grade beams). Bring any change(s) made to the contract documents to the attention of your supervisor (i.e. change made of the approval drawings, changes made by the field or yourself). Detail accessories, mesh, couplers and dowel bars and prepare material lists as required. Work with job site personnel to determine project requirements for detailing and delivery of material. Work with A/E regarding problems or questions on contract documents. Produce the material list for all products from RebarCAD and produce replacement orders as required. Enter all drawings for submission into the drawing tracking system. Perform other duties as required by your supervisor. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Vocational certificate in CAD design/drafting issued from an accredited school or college, or equivalent combination of training and work experience At least one year of experience detailing rebar using a CAD based detailing system Preferences: Two-year technical degree from an accredited school or college Construction and concrete related construction knowledge and experience Working knowledge of industry reference material (i.e. CRSI and ACI) Physical Demands Typical office activities Walking, sitting, standing, bending Using hands to operate objects, tools, computers and other electronic equipment Lifting/handling computers and related equipment Vision abilities including close vision and adjusting focus Moderate noise level Special Demands Must be able to work overtime when required May be asked to complete approximately two hours of assessments as part of the hiring process Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace