Numerical control operator jobs in Boise, ID - 351 jobs

Primary Job Function This bonus eligible position operates computer and manually controlled machines to fabricate materials, loads and cycles parts, runs production lots, detects malfunctions in machine operations and communicates with co-workers and Supervisor regarding production runs. Note: This position operates on Swing Shift (2:15pm-10:45pm), Monday through Friday. Essential Duties and Responsibilities Lathe - Working on lathes such as Haas ST-15Y and Manual Lathe Mill - Working on mills such as Haas 3 axis and 5 axis mills and Manual knee mill Operate, monitor, and complete production jobs on CNC Mills, checking parts to print, making offset changes, and producing quality parts. CNC setup and operation; tech tools, load programs, and set/adjust work/tool offsets accordingly. Utilizes Haas controls to input G & M code Calculates feeds and speeds Set up, tool selection and operation of parts with standard or custom specifications Studies blueprints, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece. Completes set-ups on multiple CNC Vertical Mills Operates computer numerical control machines to fabricate, load, and cycle parts Runs production lots and communicates with co-workers regarding production runs to maintain a safe, organized and clean work environment. Proves out and optimizes programs and fixturing for repeat parts Troubleshoots and operates as needed across multiple machines Detects malfunctions in machine operations such as worn or damaged cutting tools Reads prints and inspects parts for conformance, typically +/- .005 tolerance Checks parts using basic measuring tools such as calipers, micrometers, and depth gauges. Verifies conformance of finished work piece as specified Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment Keeps work area clean and organized Performs other duties as assigned Signing Bonus To welcome you to our team and show our commitment to your success, we are offering a signing bonus of $750.00! This bonus will be awarded in two installments, 50% upon successful completion of probationary period and the balance paid upon completion of one year of service with IMC. Qualifications Minimum Qualifications and Experience Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably. 3- years in a metal manufacturing environment with extensive experience in precision lathe and mill setup and operation. Experience with all manual inspection equipment and FAI processes Must be capable of reading drawings and making offset changes independently Must have extensive machine shop/metal working skills and grasp of fundamentals Manual machining is preferred but not required Knowledgeable using controls for Haas Demonstrated ability to set up CNC machine loading programs, tools, fixtures, and setting tool offsets. Ability to read and understand machine codes, set up own jobs and run first parts Ability to set-up machining operations per setup sheets, adjust programs as needed Mastercam/G&M code experience a strong plus Knowledge of using and interpreting results from various measuring tools. Excellent blueprint reading skills Must have good math skills including trigonometry and ability to work with decimals Must be comfortable working with close tolerances (thousandths) and be able to read and interpret engineered drawings in decimal and fractional inch units. Ability to accurately inspect parts for conformance (typically +/- .005 tolerance) using basic measuring tools such as calipers, micrometers, and depth gauges. Trade school training and lean manufacturing environment experience a plus Proficient computer skills, including Microsoft Office Strong attention to detail Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision both individually and as part of a team. Ability to work overtime as required Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels. Pay and Benefits Our pay ranges are guided by the discipline, level, and experience required. Within the range, individual pay may vary based on various factors, including desired skills/ technical competency, relevant experience, transferrable skills, and advanced education/ training. Benefits include Medical, Dental, Vision, Life, AD&D, LTD, EAP, Paid Time Off, 401(k) with Employer Contribution, Paid Holidays, as well as a Quarterly + Annual Bonus program. About IMC Integrated Metal Components, Inc. (IMC) was founded in 1995 with the mission to deliver high-quality, on-time products while building lasting partnerships with our customers. We combine cutting-edge precision equipment with a team of highly trained employees to ensure our customers receive the best possible products. Through collaboration, innovation, and an unwavering commitment to excellence, IMC aims to be a trusted, single-source solution for all sheet metal manufacturing needs. At IMC, our business is built on eight key principles: Quality On-Time Delivery Exceptional Customer Service Integrity Developing Partnerships Competitive Pricing Consistent Performance Ongoing Improvement Additional Information Integrated Metal Components, Inc. (IMC) is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace and do not discriminate against any employee or applicant based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable law. IMC complies with all federal, state, and local laws regarding nondiscrimination in employment. We encourage candidates of all backgrounds to apply. Integrated Metal Components, Inc. (IMC) participates in E-Verify to confirm the employment eligibility of all newly hired employees. For more information about E-Verify, please visit *****************

Our client, located near Lebanon, OR is looking for an experienced Machinist III to join their team. Job Title: Machinist III Pay Rate Range: $38 - $44/hour Shift: 1st What's the Job? Work with shop supervisor scheduling work for all machine centers. Organize drawings in sequence with work schedule. Organize tooling around machine centers for efficient machine productivity. Maintain tooling inventory. Communicate with shop supervisor and engineering department to determine most efficient way to complete projects. Verify quality control sheets are being completed and parts are test fitted. Responsible for machining parts accurately and quickly from engineered drawings or verbal direction. Proficient in manufacturing software, Mastercam and machine interface programing. Programing and operation of Mazak CNC lathe and mill preferred What's Needed? Minimum of 5 years' experience as a journeyman machinist. Self-motivated, energetic, dependable, honest, and thorough. Excellent coordination and mechanical skills. Strong attention to detail, accuracy, and safety. Solid written and verbal communication skills. Proficient in math and basic computer skills. What's in it for me? Medical, dental, vision 401K Match Yearly Bonus PTO Clothing/Boot Allowance If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

at FloForm Countertops With 16 branches and four manufacturing facilities located in the Pacific Northwest and Western Canada, FLOFORM Countertops manufactures, sells and installs over 20,000 premium surface countertops a year. Established in 1961, FLOFORM is proud to be one of the Best Managed Companies in North America. Required immediately, our LOCAL BOISE BRANCH is seeking CNC OPERATOR (Night Shift) FLOFORM is proud to offer the successful candidate: Competitive wage!! $22/HR - $30/HR D.O.E. Medical/RX/Dental/Vision benefits Company paid Life/ADD insurance Company paid EAP plan Medical and Dependent FSA plan Opportunity to participate in the company 401k plan Desired Skills & Experience: High school diploma CNC Operator experience a plus Basic mathematical skills Strong attention to details Understanding of written English Understanding of fractions and measurements Trouble shooting and use of good judgement Possess a valid driver's license and a clear criminal record check Duties and Responsibilities: Responsible for the safe operation of the CNC machine Sets-up stock to be machined using laser guides for placement of product Loads machines by lifting stock into position using mechanical lifters Verifies settings by measuring positions; adhering to set standards Maintains specifications by observing drilling, grooving, and cutting; taking measurements detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls sharpening and replacing worn tools; adhering to quality assurance procedures and processes Maintains workstation in a clean and orderly manner Observes and adhere to all safety procedures while on the production floor Other duties as assigned Monday - Thursday (Full Time) FLOFORM Countertops offers a positive and fun working environment that rewards those who share in our mission: “ To consistently provide our Customers the best countertop purchasing experience available .” Should this opportunity be of interest to you, contact us today!!! submit a resume. We look forward to meeting you! To learn more about us we encourage all applicants to visit our website at **************** We are an Equal Opportunity Employer.

Job DescriptionSalary: $20-25+ hour DOE CNC Saw Operator, Granite/Quartz Nampa Floors and Interiors Nampa Floors and Interiors is seeking a skilled Granite and Quartz CNC Saw Operator to join our team. The ideal candidate will have experience working with Park Industries CNC Stone Saws and possess a strong attention to detail. The CNC Saw Operator will be responsible for Programming, operating and maintaining these machines for the production high-quality countertops, vanities, and other custom pieces for our clients. This is a physically demanding role that requires precision and craftsmanship. Qualifications: Experience working with Park Industries CNC Saws. Experience with Programming in Alphacam Ability to work with digital template drawings. Strong attention to detail and ability to work with precision. Physical stamina and ability to lift heavy materials. Excellent problem-solving and troubleshooting skills. Strong communication and teamwork abilities. Willingness to learn and adapt to new techniques and technologies. Key Responsibilities: Program, Operate and Maintain CNC Saws. Ensure all pieces are cut to correct size and match template files. Maintain a clean and organized work area, including proper storage and handling of materials. Follow all safety protocols and guidelines to prevent accidents and injuries. Troubleshoot and problem-solve any issues that may arise during the fabrication process. Continuously improve skills and techniques to stay up to date with industry trends and advancements. Benefits: This is a full-time position, with PTO (paid-time-off), Holiday pay, 401K, dental insurance, health insurance and discount on company products. Applicants being considered will be scheduled for interviews. Company Background: Nampa Floors and Interiors (NFI) is a Family-Owned business, started in Nampa, Idaho in 1954. NFI is a leader in the Boise Metro Areas market and has 3 beautiful locations. We are committed to excellent and honest customer service. NFI specializes in everything flooring and countertops. Our capital, Boise, Idaho was recently listed as #2 on Forbes Magazines Best Cities for Raising a Family. Job Type: Full-Time Pay: DOE Benefits: 401(k) matching Employee discount Health insurance Paid time off Dental Insurance Holiday Pay Schedule: 8-hour shift Monday to Friday Work Location: In person.

NxEdge is a world class company providing vertically integrated solutions to the Semiconductor market. Our expertise in Engineering Material Coatings (EMC) allows global leading chip manufacturers and OEM equipment makers to achieve next generation technologies. We are seeking a driven, hands-on Machine Operator to join our ever-growing company and team. We currently have 2 day shift positions with no shift differential and 1 graveyard position with a shift differential Role and Responsibilities (includes but not limited to): * Set-up and run various CNC machine tools * Ensure all parts produced meet specs of print using proper measurement tools * Ability to work within very close tolerances * Read and follow drawings & job work instructions * Perform routine machine maintenance * Load and indicate part to fixture * Monitor tool wear, load tools and inserts as required Requirements: * Candidate will possess strong communication skills * Have excellent work ethic; being open to working overtime if the need arises * Can work in a fast-paced environment, and meet time deadlines * Must be able to read and understand drawings and handle measuring equipment * Must have knowledge of CNC milling/ lathe machines * Basic computer skills such as e-mailing, opening, and printing documents and navigating windows/internet explorer. * Attendance Physical Demands: * Ability to lift 35 pounds by self in safe manner * Ability to use lifting assist NxEdge is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

WHO WE ARE: At Harvey Performance Company, we're more than a team; we're a community. Our thriving, dynamic, and rapidly expanding organization values community, celebrates success, and fosters personal and professional growth opportunities. THE OPPORTUNITY: Our CNC Machinists are responsible for the setup and operation of our state-of-the-art CNC machinery, as well as the quality of the industry leading tools we produce We are currently hiring for second and weekend shifts, offering three four-day work weeks. Our newly renovated facility is in Meridian ID, less than a 20-minute commute from Boise. The Boise area offers a moderate climate with quick access to outdoor recreation. IN THIS ROLE, YOU WILL: Setup and maintain operation of a variety of CNC tool and cutter grinders, including Rollomatic, Star, and Walters in a high-volume production environment. Assist manufacturing engineering in continuous improvement practices. Perform first piece and in-process inspection during manufacturing. Troubleshoot new product manufacturing processes and methodologies. YOU'LL BRING: A desire to succeed in a fast-paced, growing company. Associates degree in Machine Tool Technology or relevant industry experience. Ability to follow engineering documents such as: Product drawing Process sheets Standard Operating Procedures Strong attention to detail and deadlines. Willingness to be cross-trained and work with all departments to get things done. WHERE YOU'LL WORK: Our freshly renovated facility resides in Meridian, ID, just on the edge of the border with iconic Boise, ID. Here at Harvey, we believe in fostering a strong work-life balance, enabling you to thrive professionally while embracing the charm of Meridian and downtown life of Boise. WHAT HARVEY PROVIDES: A fun, rapid-growing environment where new opportunities are regularly made available. Opportunities for training and development, including tuition reimbursement. A comprehensive benefits package, including PTO, paid holidays, health, dental, vision insurance, employee equity program, and a 401k match program, along with profit sharing. Newly renovated 50,000 Sq Ft. state of the art manufacturing facility offering the opportunity to work with Rollomatic, Walter, and Star machines. Work Life Balance - 4-day work weeks being offered. Generous Shift Differential for Second and Weekend Shifts. Exceptional Employee Referral Program. Relocation Assistance provided for candidates who are not local to the area.

WHO WE ARE: At Harvey Performance Company, we're more than a team; we're a community. Our thriving, dynamic, and rapidly expanding organization values community, celebrates success, and fosters personal and professional growth opportunities. THE OPPORTUNITY: Our CNC Machinists are responsible for the setup and operation of our state-of-the-art CNC machinery, as well as the quality of the industry leading tools we produce We are currently hiring for second and weekend shifts, offering three four-day work weeks. Our newly renovated facility is in Meridian ID, less than a 20-minute commute from Boise. The Boise area offers a moderate climate with quick access to outdoor recreation. IN THIS ROLE, YOU WILL: * Setup and maintain operation of a variety of CNC tool and cutter grinders, including Rollomatic, Star, and Walters in a high-volume production environment. * Assist manufacturing engineering in continuous improvement practices. * Perform first piece and in-process inspection during manufacturing. * Troubleshoot new product manufacturing processes and methodologies. YOU'LL BRING: * A desire to succeed in a fast-paced, growing company. * Associates degree in Machine Tool Technology or relevant industry experience. * Ability to follow engineering documents such as: * Product drawing * Process sheets * Standard Operating Procedures * Strong attention to detail and deadlines. * Willingness to be cross-trained and work with all departments to get things done. WHERE YOU'LL WORK: * Our freshly renovated facility resides in Meridian, ID, just on the edge of the border with iconic Boise, ID. Here at Harvey, we believe in fostering a strong work-life balance, enabling you to thrive professionally while embracing the charm of Meridian and downtown life of Boise. WHAT HARVEY PROVIDES: * A fun, rapid-growing environment where new opportunities are regularly made available. * Opportunities for training and development, including tuition reimbursement. * A comprehensive benefits package, including PTO, paid holidays, health, dental, vision insurance, employee equity program, and a 401k match program, along with profit sharing. * Newly renovated 50,000 Sq Ft. state of the art manufacturing facility offering the opportunity to work with Rollomatic, Walter, and Star machines. * Work Life Balance - 4-day work weeks being offered. * Generous Shift Differential for Second and Weekend Shifts. * Exceptional Employee Referral Program. * Relocation Assistance provided for candidates who are not local to the area.

CNC Machinist/Setup Operator MetalQuest Unlimited's goal is to provide the ultimate level of customer satisfaction. With our commitment to quality, we continue to strive to be better tomorrow than we are today. Our team manufactures component parts and assemblies for multiple industries, including firearms, agriculture, oil & gas, and hydraulics. We aim to be a global supplier of choice through innovation and teamwork. Responsibilities: Operate multi-spindle, twin turret/twin spindle and triple turret/twin spindle lathes Read blueprints and interpret GD&T Solidly understand G-code and have the ability to make program modifications on the shop floor Act as a mentor and trainer to share knowledge and answer questions Communicate clearly with team members, including managers, operators, and quality control personnel Perform timely, detailed visual inspections of machined parts to identify functional and cosmetic issues throughout the duration of a job Complete machine setups ranging from simple to complex on new or existing parts Display high attention to detail and integrity while performing all job functions Qualifications: High School Diploma or GED CNC Machining Certificate or 1-2 years of on-the-job experience preferred. Understand basic machining principals Knowledge of blueprint reading and a working knowledge of Geometric tolerancing and calculating Understand mathematical formulas used to calculate product dimensioning Experience using gauges and other quality measuring equipment Must be able to read work instructions, quality documents, and other pertinent written job material Qualifications listed are preferred, but not required Wages will be determined based on a candidate's proficiency in the qualifications listed above, as well as their ability to independently execute each job function Why work at MetalQuest? Flexibility Team-Oriented Company Culture Competitive Pay

Ascentec Engineering is hiring a CNC Machining Division Estimator who will work closely with cross-functional teams to evaluate setup time, cycle time, programming time, DFM, GD&T requirements, risks, and overall alignment with Ascentec's core competencies. The Estimator supplies critical inputs for accurate, timely quotations and must possess deep machining and manufacturing expertise, strong analytical skills, meticulous attention to detail, and solid business acumen. This position is onsite (not remote/not hybrid) and not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements ESSENTIAL FUNCTIONS/RESPONSIBILITY: Review and interpret customer RFQs (prints, 3-D models, and specifications). Estimate key quote inputs: manufacturing process, setup time, machine runtime, material type/size, programming time, post-machining needs, and departmental routing. Use advanced software tools to improve quote turnaround, efficiency, and accuracy. Deliver highly accurate quotes within short timeframes while meeting customer cost targets and seeking creative solutions as needed. Participate in project teams and continuous-improvement initiatives. Read and interpret complex blueprints, including GD&T callouts. Build and maintain strong working relationships with cross-functional teams. Provide feedback to product designers on manufacturability and design improvements. Identify issues proactively, lead root-cause analysis, and drive process improvements that support a lean environment. JOB QUALIFICATIONS (Abilities, Behaviors, Education, Knowledge & Skills): Minimum 5 years' experience in manufacturing and CNC machining with demonstrated machining expertise. Proven ability to review and interpret aerospace OEM manufacturing specifications. Proficiency with solid-modeling and CAM software (SolidWorks, Siemens NX, and/or Mastercam preferred). Excellent interpersonal, written, and verbal communication skills. Strong analytical and problem-solving abilities; capable of developing creative manufacturing methods and orders of operation. Demonstrated capacity to produce high-quality work under tight deadlines; self-motivated and able to work independently. PERSONAL QUALIFICATIONS: Self-starter who is motivated, flexible, and well organized. Reliable, dependable, and honest. Team-oriented with a positive, customer-focused attitude. Professional and respectful in all situations. Thrives in a fast-paced, rapidly changing environment and willingly assists others as needs evolve. COMPENSATION / BENEFITS: Competitive Salary (DOE) Comprehensive benefits package including medical, dental, vision, and life insurance Short- and long-term disability coverage 401(k) retirement plan with company matching contribution Paid time off / paid holidays Tuition reimbursement program Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Requirements ESSENTIAL FUNCTIONS/RESPONSIBILITY: Review and interpret customer RFQs (prints, 3-D models, and specifications). Estimate key quote inputs: manufacturing process, setup time, machine runtime, material type/size, programming time, post-machining needs, and departmental routing. Use advanced software tools to improve quote turnaround, efficiency, and accuracy. Deliver highly accurate quotes within short timeframes while meeting customer cost targets and seeking creative solutions as needed. Participate in project teams and continuous-improvement initiatives. Read and interpret complex blueprints, including GD&T callouts. Build and maintain strong working relationships with cross-functional teams. Provide feedback to product designers on manufacturability and design improvements. Identify issues proactively, lead root-cause analysis, and drive process improvements that support a lean environment. JOB QUALIFICATIONS (Abilities, Behaviors, Education, Knowledge & Skills): Minimum 5 years' experience in manufacturing and CNC machining with demonstrated machining expertise. Proven ability to review and interpret aerospace OEM manufacturing specifications. Proficiency with solid-modeling and CAM software (SolidWorks, Siemens NX, and/or Mastercam preferred). Excellent interpersonal, written, and verbal communication skills. Strong analytical and problem-solving abilities; capable of developing creative manufacturing methods and orders of operation. Demonstrated capacity to produce high-quality work under tight deadlines; self-motivated and able to work independently. PERSONAL QUALIFICATIONS: Self-starter who is motivated, flexible, and well organized. Reliable, dependable, and honest. Team-oriented with a positive, customer-focused attitude. Professional and respectful in all situations. Thrives in a fast-paced, rapidly changing environment and willingly assists others as needs evolve. COMPENSATION / BENEFITS: Competitive Salary (DOE) Comprehensive benefits package including medical, dental, vision, and life insurance Short- and long-term disability coverage 401(k) retirement plan with company matching contribution Paid time off / paid holidays Tuition reimbursement program Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Standing Order Madden Industrial Craftsmen is seeking a CNC Mill Machinist for a long-term, day shift role with a manufacturing company located in Beaverton, OR. The person in this position will set-up and run three axis vertical mills to machine parts for a variety of industries. PAY: $27-$30/hr CNC Machinist Responsibilities: Set-up and operation of mill parts with varying complexity and precision. Suggest modifications to program/setup to increase tool life, limit waste, and improve part quality. First article and intermittent inspection of parts to prints. Assisting with fixture development and implementation. Deburr parts as needed. Assisting with training for less experienced machine operators. Willingness to cross-train in other manufacturing departments. Follow all safety guidelines including wearing appropriate PPE (safety toe boots, safety glasses) at all times. Work a standard schedule of 5AM-3:30PM, Monday through Thursday. Flexibility to work occasional over time on Fridays and/or Saturdays during high production. CNC Machinist Qualifications: 3+ year of CNC Mill operation experience including doing set-ups. Excellent blue print reading skills. Knowledgeable about GD&T. Experience with standard inspection equipment (calipers, height gage, etc.). Experience machining metals such as (stainless, mild/hardened steels, aluminum). Reliable and punctual (Attendance is critical) Enjoys fast pace work environment and is able to change priorities easily and transition well from job to job. Professional demeanor and respectful attitude towards colleagues in all situations. Flexible and willing to help others as needs to meet production demands. Benefits: $27-$30/hour 401(K) w/ match Paid Sick Leave Medical When hired on after successful completion of the temp to hire period: low cost medical, dental, vision, 401(k) with match, PTO, profit sharing.

**Fabricates piece parts based on engineering models using CNC equipment. 4 days a week 10 hours per day Essential Duties and Responsibilities: Operate CNC machines for production. Inspect parts before, during and after machining. Maintain CNC machines per operator-level requirements. (not full preventive maintenance) Maintain neat and organized workspace. **Competencies: **To perform the job successfully, an individual should demonstrate the following: Communications - Exhibits good listening and comprehension. Able to deliver needed information to fellow machinists during shift change-over Customer Service - Displays courtesy and sensitivity. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Use of Technology - Adapts to new technologies. Demonstrates required skills. **Lean Manufacturing **- Exercises a commitment to driving value and eliminating waste. **Qualifications: **To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Experience operating CNC mills or lathes Ability to read and interpret blueprints and drawings G and M code knowledge is recommended Ability to use various measurement tools, including but not limited to calipers and micrometers Experience with Haas, Okuma, and Mori controls is recommended. **Work Environment: **The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Physical Demands: **The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is typically required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

At Bestbath Systems, Inc., we pride ourselves on being a top-rated employer in Idaho and Tennessee. Our employees' well-being-physically, mentally, and financially-is our top priority. We've built a workplace culture that's not just about getting the job done but about supporting each team member to thrive. Our commitment to your success is reflected in our comprehensive benefits package, designed to help you succeed both on and off the job. Here's what we offer our employees: Employer-Funded Health Benefits: Low premiums, so you can access high-quality healthcare when you need it most. 401(k) Match: Employees who participate in the 401(k) program are immediately vested in a 4% company match, helping you save for the future. Profit Sharing: Our Profit Share Program serves as a powerful reminder that our efforts matter-when the company succeeds, so do our employees. All staff are eligible for monthly profit sharing-but only when the company is profitable. Each year, we typically distribute 25-30% of our annual net profits. Our production team, whose hands-on work drives our business forward, is always the first to receive these bonuses. Paid Time Off (PTO): Employees start earning 2 weeks of PTO in their first year. With tenure, employees will be able to earn more PTO each year, ensuring they have ample time to rest and recharge throughout their careers at Bestbath. 4-Day Work Weeks: Our staff works Monday-Thursday, 10-hours per day. This ensures consistent 3-day weekends for our team to help with work/life balance. At Bestbath, we believe in investing in our people. We offer plenty of opportunities for career advancement and skill development through hands-on training and growth within the company. We're looking for a Specialty Fab CNC Machinist to join our manufacturing team in Caldwell, Idaho. This position plays a key role in our Specialty Fabrication department, contributing to precision manufacturing and continuous process improvement. The CNC Machinist will be responsible for programming, setting up, and operating CNC machines to cut and shape materials such as laminates, foams, MDF, and fiberglass with exceptional accuracy. You'll work closely with our Tooling and Engineering teams, supporting product development and helping identify opportunities to reduce machine downtime and increase efficiency in production. Keys to Success Precision-Oriented Craftsmanship Pays close attention to detail, ensuring cuts, dimensions, and finishes consistently meet tight tolerances and quality standards. Technical Problem Solver Diagnoses machining issues, tool wear, or programming errors quickly and implements effective solutions to minimize downtime. Adaptable & Resourceful Comfortable working with a variety of materials (foam, MDF, fiberglass, laminates) and adjusting machining strategies to achieve the best results. CAM Programming Proficiency Leverages Mastercam or similar software to create efficient toolpaths, optimize machine performance, and support design-to-production workflows. Safety & Team Mindset Prioritizes personal and team safety in a composite manufacturing environment, while collaborating closely with engineers, technicians, and production staff to deliver results. Responsibilities & Duties · Program, set up, and operate 4-axis CNC machines for cutting and machining composite materials (foam, MDF, fiberglass). · Read, interpret, and work from technical drawings, blueprints, and CAD/CAM files. · Create and optimize CNC programs using Mastercam (preferred) or similar software. · Select appropriate tools, feeds, and speeds for efficient and accurate machining. · Perform routine maintenance, machine adjustments, and troubleshooting to ensure quality output. · Inspect finished components to ensure they meet dimensional and surface finish requirements. · Organizes and Maintians and necessary files in library for efficient reference and use. · Maintain a clean, safe, and organized work area following safety protocols. · Operates forklifts to deliver and stock raw materials at point of use · Builds and complies with Standard Operating Procedures and Work Instructions for all relevant work. · Constructs patterns and builds all FRP tooling correctly, as defect free as possible to deliver to quality patterns to Mold building functions on time. · Fabrication (welding) of steel frames for new FRP molds per provided specifications; · Collaborate with engineering and production teams to improve machining processes and part quality. · Apply lean manufacturing principles to reduce waste, improve workflow, and increase machining efficiency. · Contribute to continuous improvement efforts by identifying opportunities to streamline setups, reduce cycle times, and enhance tooling strategies. · Problem solving with lean tools (A6 / A3 / PDCA) Requirements Qualifications, Knowledge & Skills · 3+ years of CNC machining experience, preferably with 4-axis machining router (5 Axis preferred) in a composites or woodworking related industry. · Proficiency with Mastercam (preferred) or similar CAM programming software. · Strong understanding of machining principles, cutting tool selection, and material properties (foam, MDF, fiberglass). · Ability to read and interpret blueprints, GD&T, and CAD models. · Understanding of G and M code; capable of making necessary edits at controller station. · Experience with inspection tools (calipers, micrometers, gauges) for quality verification. · Mechanical aptitude and strong problem-solving skills. · High attention to detail and commitment to producing high-quality parts. · Technical school certifications are a plus · Fabrication experience with a wide variety of materials that can include wood, steel, body fillers, sprayable coatings and fiberglass · General construction basics including concepts of angles, draft, slope, and tolerances · Ability to perform basic metal cutting and welding · Comfortable using an extensive variety of hand and power tools · CNC equipment repairs a plus · CCT certification (will certify through OJT) · Experience applying lean manufacturing principles to CNC machining processes. · Proven ability to participate in continuous improvement initiatives, including setup reduction, workflow optimization, and standard work practices. · Builds competency with developing skills and ownership while being given intermittent control and decision making. Work Environment & Physical Demands · Work may occur in industrial, facility, and outdoor environments. - Exposure to moderate noise, temperature changes, chemicals, solvents, and hazardous equipment. · Requires standing/walking for extended periods, frequent bending, climbing, lifting up to 100 lbs with assistance. · Ability to stand for extended periods up to 10 hrs. · Use of PPE including respirators when required (fiberglass/foam dust exposure). Tools, Equipment & Protective Gear Used Drills, saws, grinders, mixers, forklifts, welding equipment, and other hand/power tools. PPE includes safety glasses, gloves, ear protection, and other protective gear as required. Travel Requirements Local regional travel to include all Bestbath Systems facilities. Disclaimer Must perform the essential duties and responsibilities, with or without reasonable accommodation, efficiently and accurately without causing a significant safety threat to self or others. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skill required of all personnel so classified. This is not an employment agreement and/or an expressed or implied employment contract. Management has the exclusive right to alter this job description at any time without notice. American Disability Act (ADA) In accordance with the American Disability Act (ADA), Bestbath Systems may provide reasonable accommodations for qualified individuals with disabilities in order to enable them to perform essential job functions. Salary Description $25-$35

At Astec- Franklin Boulevard, formerly known as Johnson Crushers International, our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! Our Day Shift hours are Monday-Thursday 5:00am- 3:30pm What You'll Do: * Ensure that safe work practices are followed and adhered to. * Check production schedule or shop request list and plan work tasks. * Study blueprints, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished workpiece, sequence of operations, setup requirements, and check for errors. * Accurately measures, numbers, identifies dimensions, and reference points on material for fabrication or other work cells for further machining as necessary. * Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines as necessary to machine parts as required. * Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, depth, and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media according to established guidelines and procedures. * Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required. * Inspect finished workpiece(s) to blueprints, quality standards, exact tolerances, using measuring and inspection tools as necessary. * Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data to process steel (some pieces weighing as much as 300 lbs). * Consults with engineers, production management, programmers, or others to resolve machining or programming problems. * Maintain a clean and organized work area and maintain all equipment, to like-new appearance, according to maintenance plans and established procedures. * Assist with directing work activities of any support staff as necessary (forklift operator, CNC machine trainees, and/or material handlers). * Miscellaneous other duties as directed by Shift Lead or Supervisor. Why You'll Love Working for Us: * Health, Dental, Vision- Day 1 Eligibility * Life, and Spousal Insurance * Health Savings and Flexible Spending Accounts * Short-Term and Long-Term Disability * 401(k) with Company Match * PTO * Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: * High school diploma or GED preferred * Minimum two years' experience operating CNC lathes and/or mills or Machinist Technical Certification through an accredited college * Able to use overhead crane and forklift to move and roll over large heavy parts. * Ability to apply concepts such as basic math skills, fractions, micrometers, percentages, ratios, proportions to practical situations, and able to convert decimals into inches. * Must be able to read and interpret a tape measure, blueprints, and bills of material (BOM's). * Continue to grow lean knowledge and use the tools to identify and assist with continuous improvement. ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Setup and operate CNC machinery to manufacture medical implants and instruments. Perform inspection of machined parts for acceptability per manufacturing prints. Effectively maintain equipment as required. What You'll Do: Use handheld tools such as calipers and micrometers to inspect machined parts. Load and unload medical implants for machining. Perform basic equipment maintenance. Read and interpret manufacturing prints. Become proficient in minor to complete setup, program download and operation of CNC machinery within the first year of employment. Accurately and consistently document all performed tasks on appropriate records (work orders, inspection sheets, maintenance logs, Machine Metrics, Net Inspect etc.). Inspect documents for previously completed operation sign off and verify part counts before beginning any manufacturing operation. Do not proceed if discrepancies are found. Perform required maintenance checks of equipment before beginning any manufacturing operation. Do not proceed if problems are found. Prior to use, ensure measuring equipment has been calibrated, is not beyond calibration date, and is in good working condition. Follow established protocol to maintain ID & traceability of product and documentation. Do not perform operation if ID is questionable. Reference applicable drawings, specifications, and Manufacturing Process Instructions before beginning any manufacturing operation. Follow department Standard Process Instructions. What You'll Need: 1 year college related course in machine shop practices preferred 1 year previous machine operation experience in metal manufacturing preferred Ability to read and interpret manufacturing prints Proficient in the use of hand held measuring tools such as calipers and micrometers. Possess efficient math skills Basic computer skills

We are looking for a CNC Mill Machinist to join our 2nd shift in Tualatin, OR. CNC Mill Machinist Responsibilities: Operate CNC mill machines to produce parts according to technical specifications, drawings, or blueprints Monitor machine functions, ensuring they are operating correctly and efficiently Load raw materials onto the machine Secure the workpieces ensuring proper alignment and positioning for accurate machining Use precision measuring instruments such as calipers, micrometers, and gauges to check the dimensions of finished parts Ensure the parts meet quality standards and specifications, adjusting as necessary Continuously monitor the machine's operation during the machining process Follow instructions carefully from setup technicians, programmers, or supervisors Keep the work area clean and organized, ensuring all tools, equipment, and materials are properly stored when not in use Preferred Qualifications: High school diploma, general education degree (GED) or equivalent Experience in a precision machine shop environment Ability to interpret geometric dimensions and tolerances (GD&T) At least 6 months of experience in machine tool operation or 6 months machining training, or equivalent combination of education, experience, and/or training Preferred Skills: Training in basic shop and measurement math, including linear measurement, metrics, algebra and geometry Familiarity with ISO documentation and processes is a big plus Pay: Competitive pay based on experience Employees on the 2nd shift receive an addition 10% differential towards their pay 10% differential = Hourly Pay X .10 Eligible for Overtime Benefits: Health Benefits: Medical, Dental, and Vision Life and Disability: Life and Accidental Death & Dismemberment, Long Term Disability 401K Retirement Plan (3% company match) About us: A Silicon Valley leader in manufacturing and assemblies, Calmax Technology, Inc. manufactures precision machined parts and provides turnkey assembly to Fortune 500 customers across technology, automotive, aerospace, semiconductor, and medical industries. We are based in Santa Clara, CA with locations in Tualatin, OR. Calmax is ISO - 9001 certified. Additional Information: Please reach out to *********************** if you have any questions about the position, job listing, or application process.

ENTEK is synonymous with some of the world's best lead-acid separators, lithium-ion separators, extruders, and engineering services for the battery and extrusion markets. We operate on six continents; astronomical growth for the simple lead-acid battery separator company James Young and Pete Johnson founded in Lebanon, OR in 1984. Our intimate knowledge of both the design and manufacturing of separators spurred the introduction of our high-speed co-rotating twin-screw E-Max extruder in 1998-recognized as the fastest to install and easiest to operate extruder on the market. In 2001, our first lithium-ion battery separator line expanded our reach in Asian markets, delivering a quality product at a market-leading price. Our success here is fueled by consistently living our core values of respect, integrity, commitment, and innovation. From state-of-the-art separators and extruders, to 360° engineering and support for all of it, ENTEK's commitment to non-stop innovation and attention to customer service keeps production lines humming. With plants in both Lebanon, OR and Newcastle UK, we are set up to make sure that a world at work has what it needs to stay at work, 24-7. Job Description The CNC Machinist has in-depth knowledge of the both operation of machines as well as the knowledge to take design demands and turn the concept into the required customer demanded item/part. The job typically requires 5+ years of combined formal training and experience, or equivalent. Requires a broad knowledge of machining techniques and familiarity with computer numerically controlled machine tool operating procedures. Setups involve familiarity with and understanding of program formats involving combinations of operations such as profile and contour milling, boring, recessing, turning, drilling, threading, etc., to the capacity of the machine and control factor. Performs advanced setup operations, adjusts and checks out programming and operates numerically controlled machine tools to perform a complex series of progressive machining operations on a diversified line of work to close and exacting tolerances and finish specifications requiring a high degree of skill. May set up machines for and instruct other operators. Check parts for conformance to specifications. Operators may run more than one unit simultaneously. Qualifications Must have 5+ years of combined formal training and experience. Trained to operate all CNC machine tools in shop Knowledge and ability to read and use G & M code at the control Ability to read and understand GD&T Tolerances Participate / Perform special projects Set up tooling, fixturing and inspection equipment required for all part types Prove CNC programs and ensure proven status of program and all associated documentation. Lead / Perform special projects Seek / perform disposition of questionable product Work with lead / manager to schedule area workload Create part programs using machine control, editor, or CAM system Adhere to ENTEK Core Values Understand and follow company Lean Six Sigma philosophies. Maintain company 5S work area standards Communicate effectively with Lead person / supervisor Self driven, consistently perform high quality work in a safe manner without supervision Pay ranges from $18-$26 depending on experience Additional Information PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee may be required to work 12.0 hour shifts, spending the majority of time on their feet. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 30 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. If situations arise requiring lifting or moving of items exceeding 50 pounds, the employee must review it with the lead/supervisor to determine safe techniques to avoid injury. Specific vision abilities required by this job include close vision, color vision, depth TRAVEL REQUIRMENTS: None. We are an Equal Opportunity Employer. M/F/Disabled/Veteran

Primary Job Function This bonus eligible position operates computer and manually controlled machines to fabricate materials, loads and cycles parts, runs production lots, detects malfunctions in machine operations and communicates with co-workers and Supervisor regarding production runs. Note: This position operates on Day Shift (6:00am - 2:30pm), Monday through Friday. Essential Duties and Responsibilities Lathe - Working on lathes such as Haas ST-15Y and Manual Lathe Mill - Working on mills such as Haas 3 axis and 5 axis mills and Manual knee mill Operate, monitor, and complete production jobs on CNC Mills, checking parts to print, making offset changes, and producing quality parts. CNC setup and operation; tech tools, load programs, and set/adjust work/tool offsets accordingly. Utilizes Haas controls to input G & M code Calculates feeds and speeds Set up, tool selection and operation of parts with standard or custom specifications Studies blueprints, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece. Completes set-ups on multiple CNC Vertical Mills Operates computer numerical control machines to fabricate, load, and cycle parts Runs production lots and communicates with co-workers regarding production runs to maintain a safe, organized and clean work environment. Proves out and optimizes programs and fixturing for repeat parts Troubleshoots and operates as needed across multiple machines Detects malfunctions in machine operations such as worn or damaged cutting tools Reads prints and inspects parts for conformance, typically +/- .005 tolerance Checks parts using basic measuring tools such as calipers, micrometers, and depth gauges. Verifies conformance of finished work piece as specified Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment Keeps work area clean and organized Performs other duties as assigned Signing Bonus To welcome you to our team and show our commitment to your success, we are offering a signing bonus of $750.00! This bonus will be awarded in two installments, 50% upon successful completion of probationary period and the balance paid upon completion of one year of service with IMC. Qualifications Minimum Qualifications and Experience Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably. 3 years in a metal manufacturing environment with extensive experience in precision lathe and mill setup and operation. Experience with all manual inspection equipment and FAI processes Must be capable of reading drawings and making offset changes independently Must have extensive machine shop/metal working skills and grasp of fundamentals Manual machining is preferred but not required Knowledgeable using controls for Haas Demonstrated ability to set up CNC machine loading programs, tools, fixtures, and setting tool offsets. Ability to read and understand machine codes, set up own jobs and run first parts Ability to set-up machining operations per setup sheets, adjust programs as needed Mastercam/G&M code experience a strong plus Knowledge of using and interpreting results from various measuring tools. Excellent blueprint reading skills Must have good math skills including trigonometry and ability to work with decimals Must be comfortable working with close tolerances (thousandths) and be able to read and interpret engineered drawings in decimal and fractional inch units. Ability to accurately inspect parts for conformance (typically +/- .005 tolerance) using basic measuring tools such as calipers, micrometers, and depth gauges. Trade school training and lean manufacturing environment experience a plus Proficient computer skills, including Microsoft Office Strong attention to detail Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision both individually and as part of a team. Ability to read, write, and communicate effectively in English Ability to work overtime as required Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels. Note: The above physical requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Pay and Benefits Our pay ranges are guided by the discipline, level, and experience required. Within the range, individual pay may vary based on various factors, including desired skills/ technical competency, relevant experience, transferrable skills, and advanced education/ training. Benefits include Medical, Dental, Vision, Life, AD&D, LTD, EAP, Paid Time Off, 401(k) with Employer Contribution, Paid Holidays, as well as a Quarterly + Annual Bonus program.About IMC Integrated Metal Components, Inc. (IMC) was founded in 1995 with the mission to deliver high-quality, on-time products while building lasting partnerships with our customers. We combine cutting-edge precision equipment with a team of highly trained employees to ensure our customers receive the best possible products. Through collaboration, innovation, and an unwavering commitment to excellence, IMC aims to be a trusted, single-source solution for all sheet metal manufacturing needs. At IMC, our business is built on eight key principles: Quality On-Time Delivery Exceptional Customer Service Integrity Developing Partnerships Competitive Pricing Consistent Performance Ongoing Improvement Additional Information Integrated Metal Components, Inc. (IMC) is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace and do not discriminate against any employee or applicant based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable law. IMC complies with all federal, state, and local laws regarding nondiscrimination in employment. We encourage candidates of all backgrounds to apply. Integrated Metal Components, Inc. (IMC) participates in E-Verify to confirm the employment eligibility of all newly hired employees. For more information about E-Verify, please visit *****************

At Astec-Portland, formerly known as Peninsula Iron Works, we have been a trusted leader in heavy industrial manufacturing, repair, and custom machining for over a century. Based in Portland's industrial sector, we support industries such as mining, energy, wood products, marine, and steel production. Our team specializes in precision fabrication, large-scale repair, and machining solutions that keep critical infrastructure running across the Pacific Northwest and beyond. Join us and contribute your skills to projects that truly make an impact. Position Summary We are seeking an experienced Manual Machinist (15+ years preferred) to join our team. The ideal candidate will bring deep expertise in manual machining, a commitment to safety, and the ability to work independently on complex, large-scale projects. Responsibilities * Perform a wide range of manual machining operations including turning, milling, drilling, reaming, boring, slotting, grinding, and tapping. * Rigorously follow all shop safety procedures and maintain proper use of PPE. * Safely rig, move, and position large and heavy parts using overhead cranes. * Monitor, maintain, and properly use shop tooling. * Read, interpret, and apply advanced-level blueprints, including GD&T. * Inspect and verify dimensional accuracy of workpieces using calipers, micrometers, indicators, profilometers, and other precision tools. * Communicate effectively with team members and supervisors to ensure efficient project execution. Qualifications * Minimum of 10+ years of experience as a manual machinist; 15+ years strongly preferred. * Proven knowledge of rigging practices and safe operation of overhead cranes. * Advanced ability to read and interpret blueprints, with strong knowledge of manufacturing processes and GD&T. * Expert-level understanding of metrology and inspection tools. * Strong work ethic, reliable attendance, and a positive attitude that contributes to a safe, efficient shop culture. * Flexibility to work weekends and overtime as needed. * Capable of standing for extended periods of time.