Numerical control operator jobs in Brockton, MA - 258 jobs

CNC Programmer / Fabrication Specialist Must have active Secret Clearance Seeking an experienced fabrication specialist and machinist with expertise in complex parts development, providing autonomy over their fabrication approach, fixture design/fabrication, tooling, CAM programming, setup, and machine operation. The ideal candidate is a talented, creative, and motivated individual with a strong aptitude for problem solving, critical thinking, creativity, and excellent interpersonal, verbal/written communication, and time management skills with an enthusiasm, aptitude and willingness to learn new state-of-the-art technologies and software. Given the nature of working in a high precision environment, meticulous attention to detail is paramount in successful execution and delivery of high-quality hardware that's instrumental to program success. The position supports high precision mechanical fabrication that oftentimes requires leveraging several advanced manufacturing technologies in series to achieve the final deliverable part. . Requirements: 10+ years of direct experience in simultaneous 5-axis machining, including setup, CAM programming, tooling selection, and CAM simulation Competency reading mechanical drawings and interpreting GD&T Ability to design and fabricate basic fixtures Experience using basic hand tools and inspection equipment, such as: Calipers, thread/pin gages, micrometers, dial indicators Previous experience with the following software types: CAM software, 3D CAD, MS Office (Excel. Word, Outlook) Enthusiastic to learn new fabrication techniques, technologies, and machine tools Ability to work in a team environment and collaborate with other Laboratory personnel to solve fabrication challenges Comfortable attending manufacturability reviews with confidence to participate and provide feedback Self-motivator with excitement for working in R&D environment supporting novel prototype development that demonstrates technology of national importance Maintain a clean and well-organized work area and follow safety protocols Ability to lift up to 50lbs Desired Skills: Previous work in high mix, low volume job shop environment SolidWorks CAD software hyper MILL CAM software M&H on machine inspection software Heidenhain iTNC 530 controller Prior experience machining any of the following: Titanium, Invar, Metal Matrix Composites (MMCs), Hastelloy, 17-4 PH, Invar, Fiber Reinforced Composites Digital fabrication tools, such as; Model Based Definition (MBD), Product Lifecycle Management (PLM) software (Aras Innovator) Exposure to ultrasonic machining

The responsibilities of a Zund/CNC Operator are to set up and operate digital die cutting equipment and ensure the customer needs are met by producing high quality printed material in a safe, productive manner. Effectively run all digital die cutting equipment Complete jobs according to customer specifications by producing quality work and performing quality checks Monitor production throughout the run for quality, maintaining all required samples as designated by the customer and procedures Complete standard set up and standard adjustments Perform basic preventative maintenance in accordance with production schedule Change modules, bits, blades and tools on all Zund equipment. Meet customer needs by reviewing and following the posted Zund schedule Troubleshoot various press issues as needed Ensure have proper press supplies/inventory on hand to meet production needs Move materials via material handling equipment including forklift and pallet jacks Track job costs/production hours as applicable Perform maintenance to department equipment Contribute to safety goals by maintaining a clean, clutter-free workplace, report potentially unsafe conditions and ensure that the department meets and exceeds safety requirements Meet productivity and quality standards by completing work in timely and accurate manner Work overtime as needed Other duties as assigned Minimum Qualifications High school diploma or general education degree (GED) Basic computer skills including email, basic mouse, keyboard and menu navigation Basic math skills including addition, subtraction, multiplication, division and measurement Ability to communicate/understand basic written and verbal instructions Able to be certified in driving a fork truck and unitize a pallet jack Preferred Qualifications 1 plus years of experience working in printing, manufacturing, distribution and/or fulfilment Physical Requirements Frequent reaching, bending, climbing, kneeling, crouching, and stooping Frequent walking and standing for prolonged periods of time Ability to lift, pull, push up to 50 pounds Ability to visually inspect all work for defects Compensation: $18.00 - $25.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

Tutor Intelligence, an MIT robotics startup, has developed a novel no-code interface to instruct robots on new tasks. We are deploying this technology to factories and warehouses across America, and are growing our team to support 24-7 operations. This is an operational role - perfect for someone who is looking to get involved with technology and join a fast-moving startup. In this role, you will work to keep the robots in the field happy and healthy. Your responsibilities include: * Instructing robots via a web-based portal* Responding to customer support calls and resolving technical issues* Learning protocols for diagnosing and solving robot issues* Tracking robot performance and providing feedback to engineering* Reporting bugs and testing new features This role is shift-based and requires regular weekend coverage. Shift 1: 6:30am - 3:30pmShift 2: 3pm - 11pmShift 3: 11pm - 7am (Overnight) Shift 4: 11am - 7pm (Sat-Weds) We have weekend and holiday operations, which mean you will be scheduled for at least one weekend day and holidays (as needed). This opportunity comes with benefits, including health insurance. We are fully in-person in Watertown MA, with parking onsite. We are a startup looking for people who are eager and excited to do what they can, to ensure the team is making progress and our mission is successful. If this sounds like you (and you don't mind hanging with a bunch of robot nerds :), then we look forward to your application!

Job Description Nova Biomedical: One Global Brand. One Vision. Together under one name. Advanced Instruments and Nova Biomedical are now united under one brand, Nova Biomedical, marking a major milestone in our journey to deliver greater value to our customers. By combining our strengths, we're accelerating innovation, supporting critical workflows, and delivering world-class service across the biopharmaceutical and clinical markets. About the company At Nova Biomedical, we're not just building instruments, we're powering breakthroughs that improve lives. Our smart, science-driven solutions are trusted in over 100 countries to speed drug development and enhance patient care. Our integration brings together more than 70 years of scientific excellence with Nova's cutting-edge innovation, forming a powerhouse of precision, purpose, and possibility. With FDA-registered, ISO-certified manufacturing, more than 125 FDA approvals, and industry-trusted diagnostics, we're setting new standards in quality and reliability. Nova Biomedical is proud to be a global leader in osmolality testing and biotechnology and in vitro diagnostic (IVD) instrumentation, dedicated to advancing patient care and scientific discovery with a legacy that continues to shape the future of life sciences. With headquarters in Norwood and Waltham, Massachusetts, and a global team of nearly 2,000 employees, we're building a collaborative, empowered culture grounded in shared values: Customer Centricity, Ingenuity, Ownership & Accountability, Collaboration, and Integrity. Working at Nova Biomedical means joining a mission-driven organization where your contributions matter. Whether you're in engineering, science, manufacturing, or support, you'll be part of a team that values innovation, invests in your growth, and is committed to making a real-world impact on global health. Explore what's next with us at novabiomedical.com or aicompanies.com About the role Responsible for operation, set up, and programming of all manual and automated equipment in the shop. Must be proficient in Mastercam CAD system. If you're passionate about CNC machinery / programming and want to be part of a team that is shaping the future of life sciences, we'd love to hear from you, apply today! What you'll do Ability to set up all shop equipment including the Manual Milling, Lathe and Trak Lathe machines Ability to program all manual and automated equipment and machines Set up and maintain operation of CNC Millers and Lathes, including tool offsets and editing of CNC programs Responsible for part quality, dimensional inspections and meeting time standards Maintaining equipment upkeep and a clean Model Shop overall What we are looking for in you Read and write English and follow written/verbal instructions Perform Machine Shop math Working knowledge of Good Manufacturing Practices (GMP) Be able to work independently Proficient with all shop measuring tools Five plus years of Machine Shop experience and the skill level of Machinist A with programming knowledge High School or Technical School graduate Physical Requirements for this role include: Ability to lift up to 50 lb. Ability to work while standing, sitting, or bent for prolonged periods Ability to work in a loud Machine Shop environment with CNC mill and lathe machines Ability to wear PPE eyewear The full list of physical requirements for this role is available upon request. Why work for Nova Biomedical Flexible Medical, Dental, & Vision Coverage Competitive 401k company match Bonus Program, Generous PTO and paid holidays Generous Tuition reimbursement Hybrid and flexible work arrangements (job specific) Professional development, engagement and events Company marketplace for lunch and snacks! (location specific) Company subsidized cafeteria (Waltham) Work Location: On-site in Waltham Schedule/Hours: Monday to Friday, 7am - 3:30pm Targeted Salary Range: $39 -$43 Nova Biomedical believes in transparency and integrity throughout all we do, including compensation. The provided salary range for this role represents the expected base salary or hourly rate for this opening. Actual compensation will be commensurate with the candidate's experience and may vary based on individual factors such as location, skills, and education. EEO Statement: Nova Biomedical takes pride in being an equal opportunity employer committed to hiring a diverse and inclusive workforce. As a part of our commitment to a diverse and inclusive workforce, Nova Biomedical will continue to take steps to assure that recruitment, hiring, assignment, promotion, compensation, and all other personnel decisions are made and administered without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, gender expression, veteran status, age, mental or physical disability, genetic information or any other protected class. Privacy policy *******************************************************************

SummaryJob Description If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard. Working at our Lynn Facility Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone. By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter. Here are just a few of the best reasons you will want to consider us: Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. Earn merit-based rewards and incentives. Free Onsite Parking. Set work schedule with no mandatory overtime. Work in a climate-controlled building out of the elements. Have opportunities for continuous learning and development. POSITION RESPONSIBILITIES: • Develop 2 and 3-axis N/C processes for development hardware (i.e., machining programs, tooling,) as well as 4 and 5 axis N/C processes. • Contribute to process improvement efforts on mature hardware with similar support. • Set up and operation of machine tool equipment (both N/C and standard types to support development/production cell activities) • Work to blueprints, sketches, and verbal instructions to produce development hardware. • Perform in-process dimensional checks, including CMM operations/set up. • Troubleshoot process issues. • Create development/production planning and support revisions of production planning as appropriate for process changes. • Provide direction to other skilled employees involved with development and production. • Perform other related duties as required MINIMUM QUALIFICATIONS: • Bachelor's degree from an accredited university/college OR associate degree with a minimum of 2 years in manufacturing experience OR a High School Diploma/GED with a minimum of 4 years manufacturing experience; All manufacturing experience must be specifically machining, assembly, machine repair or inspection. • NC programming experience (APT, UG, or other structured systems.) • Proficient in shop mathematic i.e. geometry and trigonometry, blueprint reading, geometric dimensioning, and tolerances DESIRABLE QUALIFICATIONS: • Apprentice graduate. • Machining experience, NC and/or manual • Strong oral and written communication skills. • Manufacturing experience • Experience in tooling and fixturing, STAS, tooling vendors, Maximo generation. • Ability to work with minimal supervision and direction - self-starter. • Ability to interface with various levels of management (i.e., Design Engineering and Project) and shop floor workforce. • Ability to maintain relationships that facilitate task accomplishment; to cooperate and resolve conflicts; to recognize needs and be sensitive of others. • Ability to receive guidance and supervision; follow work rules, safety practices, work procedures; meet deadlines; punctuality and attendance standards, etc. The base pay range for this position is 1700.19/weekly. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Machines parts to customer specifications doing in-process part inspections. Lead will oversee and schedule turning or milling area; troubleshoot; program and work with milling or turning lead on first piece inspections. Essential Duties and Responsibilities - Assist in Mfg. of parts which require strict customer specifications. - Machine (turning/lathe/mill/mill-turn) product to customer specifications/print using CNC programs. Lead will program, perform upgrades and check outcomes to changes. - Deburr machined parts per requirements. - Detect, segregate and report non-conforming material and foreign object debris (FOD). - Control of non-conforming material along with understanding the use of documentation reporting such issue. - Maintain part identification and lot segregation. - Inspect work as necessary to prints callouts. - Accurately report any damaged/nonconforming parts to team leaders/Mgr. - Assist with packaging and shipping parts. - Properly fill out documentation/job travelers accurately. - Compliance with AS9100D and customer-specific requirements. - Report any safety issues found in performance of normal job activities. Competencies - Print Reading - Basic understanding of geometric dimensioning and tolerancing is a plus. - Multitasking (i.e. inspect/measure parts while other parts are running, running more than one machine at a time) - Dexterity - Endurance (standing on job for long-periods of time) - Attention to detail - Cleanliness and organization - Focus on safety/safe work track-record - Reading/understanding gages and other measurement devices (such as calipers and micrometers) - Team player/doing things for the right reasons within the confines of an AS9100 environment Required Knowledge and Skills - Geometric dimensioning and tolerance understanding. - Brown and Sharpe Micro-Val CMM experience a plus. - Experience with CMM Manager software a plus. - Use of many types of inspection equipment, dial indicators, gage blocks, micrometers. - Good communication skills. - Good math skills - Familiar with AS9100 shop environment. Specific Training Required - Familiarity with Jet Machined Products inspection forms and record keeping practices. - AS9100 awareness. Education Required/Preferred - Vocational or non-vocational High School Graduate or GED Direct Supervisor Turning/milling lead and if lead the General Manager Physical/Mental Demands - Must be able to lift and move machined parts Work Environment - Clean and relatively quiet in most areas, hearing protection required in some areas - Eye hazard potential, eye protection required for certain operations Frequency of Overtime/Extended Hours Occasional overtime, workload dependent.

Job Description We are seeking a skilled CNC Programmer to join our dynamic manufacturing team. The ideal candidate will have a strong mechanical background and experience in programming CNC machines to produce high-quality components. This role requires precision, attention to detail, and the ability to work collaboratively in a fast-paced environment. Duties Develop and optimize CNC programs for both Lathe and Milling machining operations, ensuring high accuracy and efficiency. Must have 3+ years of Mastercam 19 or up Set up and operate CNC machines, including lathes and milling machining equipment. Conduct inspections using coordinate measuring machines, micrometers, bore gauges, and other precision measuring tools to ensure product quality. Apply geometric dimensioning and tolerancing (GD&T) principles in programming and inspection tasks. Maintain tooling inventory and ensure all tools are calibrated and in good working condition. Fabricate components as needed while adhering to safety standards and best practices. Requirements Proven experience as a CNC Programmer in a manufacturing environment. Strong mechanical knowledge with the ability to read blueprints and technical drawings. Proficiency in CAD software for designing parts and tooling. Familiarity with electrical discharge machining (EDM) processes is a plus. Experience with tooling setup, maintenance, and optimization. Knowledge of coordinate measuring machines (CMM) for quality control purposes. Ability to use precision measuring instruments such as micrometers and bore gauges effectively. Excellent problem-solving skills with a keen attention to detail. Strong communication skills and the ability to work well within a team. If you are passionate about precision machining and possess the required skills, we invite you to apply for this exciting opportunity as a CNC Programmer. Job Type: Full-time Pay: $35.00 - $40.00 per hour Expected hours: 40 per week Benefits: 401(k) 401(k) 4% Match 401(k) matching Dental insurance Health insurance Life insurance Paid time off Referral program Retirement plan Vision insurance Schedule: 8-hour shift Day shift Monday to Friday Morning shift

The CNC Machinist will be responsible for operation of CNC machining centers in a high-volume manufacturing environment. The technician may be asked to support other processes or production lines as demand and production schedules dictate. 2 nd Shift - Mon - Fri, 3:00pm - 11:30pm Essential Duties and Responsibilities: Develop and maintain strong, internal working relationships across ConforMIS. Understand the objectives, responsibilities, and mission of the Production department and works towards those goals. Prioritize and plan work activities; adapt for changing conditions. Operation and light maintenance of CNC machining centers and associated tooling. Hand deburring of metal medical implants after machining. Perform in-process inspection of CNC machined parts. Perform timely and accurate transactions of workflow in ERP system. Maintain CNC machine spare parts and consumable tooling. Assist in the investigation and implementation of corrective actions on product and process failures. Comply with all company policies and procedures including safety regulations, personal protective equipment requirements, Standard Operating Procedures, Work Instructions and Good Manufacturing Procedures. Interface with vendors to seek solutions for equipment repairs and refurbishment. Responsible for upkeep of manufacturing areas and provide a clean and safe work environment. Review all manufacturing documentation, assembly, inspection, test, packaging procedures and provide feedback. Support engineering activities such as process validations and equipment qualifications. Other responsibilities as assigned. Qualifications: High school diploma or equivalent. Technical education preferred. 1-5 years of experience in a medical device and/or regulated environment. Demonstrated English reading and writing skills. Familiarity with ISO Standards and Good Manufacturing Practices. Familiarity with Oracle (or equivalent) ERP systems and Microsoft Office Applications. Skills, Abilities, Competencies Required: Excellent written and verbal communication skills. Able to work accurately in a fast-paced, hectic, ever-changing environment with strong attention to detail. Demonstrated ability to monitor own work to ensure quality, accuracy and thoroughness. Strong organizational, analytical and time-management skills. Able to self-motivate and work both independently and as part of a team. Experience with inspection equipment (calipers, micrometers, comparator). Experience with metal polishing and other post-machining processes. Experience operating and maintaining CNC machining centers. Experience in a lean manufacturing environment a plus. Manual dexterity and coordination to load and unload parts during machining operations. Ability to work in a fast-paced environment and multitask. Comfortable with change. Ability to work as part of a team as well as independently. Familiar with Geometric Dimensioning and Tolerancing. Familiar with general machining techniques and practices. ConforMIS is an Equal Opportunity Employer

First Shift: 7:00am-3:30pm $40.00 - $48.00 Hr. Reporting directly to the Machining Manager, the CNC Programmer works with the machining team to set-up and program different jobs to support production requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Programs, sets up, and operates CNC milling, lathes, or other machinery according to blueprint specifications and available equipment. * Programs for operation of CNC Router (Multicam 5000) for other members of machining team. * Utilizes G-Code, Camworks, SolidWorks, or other CAM software. * Reviews solid models, drawings, and customer specifications to understand customer requirements. * Selects appropriate machines (e.g. lathes, mills) and proper set-up of material for job. * Producing quality parts according to the blueprints and company quality standards. * Maintains equipment by completing preventative maintenance requirements * Ensure all safety guidelines at all times and maintains a clean environment. * Perform other duties as assigned. GENERAL * Programs different materials for production by machining team. * Maintains a clean and organized work area and general housekeeping TYPICAL EQUIPMENT USED: * Computer utilizing Camworks/Solidworks software * 3 or more axis machining center * Various hand tools * Tape measures, calipers and other measuring devices * Carts, dollies and other heavy weight moving equipment KNOWLEDGE, SKILLS & ABILITIES * High school diploma or equivalent required. Completion of vocational training preferred. * 5+ years of industry-related experience in lieu of education. * Demonstrated understanding of tool holders and tool types. * Demonstrated understanding of differing feed and speed settings. * Demonstrated understanding of tool path following/alternative paths. * Experience on CNC router Multicam and others CNC Milling machine is a plus ( Haas, Campro with Fanuc control). * Working knowledge of 3D CAD/CAM, Camworks, SolidWorks is a plus. * Working knowledge of writing and evaluating G-Code. * Ability to accurately use and interpret measuring equipment including precision tools (e.g. calipers) to take accurate measurements. * Ability to interpret dimensions and tolerances. * Ability to read blueprints, schematics, and manuals utilizing GD&T. * Ability to operate & enter data into standard Windows based computers * Good verbal and written communication skills * Strong attention to detail * Works well with multi-functional teams. * Analytical thinking/problem solving * Excellent organizational skills * Ability to multi-task and be dependable, flexible and adaptable to meet changing or multiple deadlines * Ability to take initiative to identify a problem, obstacle or opportunity and take action within the scope of the position, as authorized * Ability to exercise judgment to solve operational problems where the answer is not apparent * Mechanical aptitude * Ability to read and understand QC inspection documentation * Visual acuity to identify surface quality defects 1/32" and larger * Willing to learn new machining and mold fabrication techniques. WORKING CONDITIONS/PHYSICAL DEMANDS * Frequent use of hands or fingers to handle or feel objects, tools, or controls. * Regular exposure to noise, dust, high heat and chemicals * Frequent reaching with hands and arms * Constant standing and use of hands while performing essential functions of the job. * Constantly communicating with others to exchange information. * Must be able to lift, push, and pull up to 50 pounds. * Must be able to wear PPE as necessary (safety glasses, hearing protection, steel toe shoes, etc.).

Enjet Aero Malden manufactures precision sheet metal and machined turbine engine components. We offer competitive salaries based upon experience and generous benefits including medical, dental, 401k and paid vacation and holidays. Job Description We are looking for a motivated individual that can set up and run CNC vertical turning machines. Must have a complete knowledge of G & M codes along with the ability to edit programs. Proficiency with conversational controls a huge plus. Sheet metal machining, advanced CNC knowledge (no CNC operators), along with the ability to make decisions. A high level of B/P reading is required. Additional Information We offer competitive salaries based upon experience and generous benefits including medical, dental, 401k and paid vacation and holidays.

We're looking for a skilled CNC Machinist to join our team and work on high-precision components using multi-axis CNC lathes. If you take pride in clean setups, accurate parts, and keeping machines running at their best, this is a great fit. About the Role You'll handle full set-ups and daily operation on equipment including DECO 2000, Nakamura, STAR ST38, and SR20 with bar feeders. This role requires at least two years of set-up experience on multi-axis lathes. What You'll Do · Read and interpret customer prints, including geometric tolerances. · Perform first-piece and in-process inspections to ensure parts meet spec. · Make offsets, minor program edits, and tool changes as needed. · Perform basic machine maintenance and keep equipment running smoothly. · Set up bar feeders, collets, bushings, gang and power tools, drill stations, C-spindles, ejector pins, and back-working tools. · Edit programs and understand G-codes, M-codes, and tool movements. · Support efficient production and maintain quality throughout each run. Preferred Skills · Toolmaking · Ability to make or modify tools and drills. · Strong understanding of tooling geometry. What We're Looking For · 2+ years of multi-axis CNC lathe set-up experience · Solid print-reading and inspection abilities · Strong attention to detail and pride in producing quality work · Someone who likes staying productive and keeping machines dialed in

Double E Group is an international market leader in the engineering and manufacturing of web handling, material handling, and converting solutions. Our broad portfolio of products is marketed to the paper, tissue, film and foil converting industries. The CNC Lathe Machinist I would join a team of skilled professionals in our Machining/Manufacturing/Assembly facility. You would be working with other members of the manufacturing team regularly (manual machining, saw cut, assembly/service). Responsibilities • Operate CNC equipment in a low-volume, high-mix environment (5+ changeovers daily) • Analyzing and grouping jobs to reduce set up times and maximize workflow. • Conducting machine set ups in an efficient manner. • Responsible for first piece inspection utilizing visual and hand inspection equipment, which would include: Vernier calipers, Micrometers and drop dial indicators. • Excellent communication skills are required to interact directly with Supervisor/ Application Engineering/Programming to collaborate on process improvements. • Mount, install, align, and secure tools, attachments, fixtures, and pieces on machines, using hand tools and precision measuring instruments. • Stop machines to remove finished pieces or to change tooling, setup, piece placement, according to required machining sequences. • Transfer commands from servers to computer numerical control (CNC) modules, using computer network links. • Check to ensure that pieces are properly lubricated and cooled during machine operation. • Review program specifications or blueprints to determine and set machine operations and sequencing, finished piece dimensions, or numerical control sequences. • Other duties, as assigned. Requirements • Some degree of CNC programming experience • Requires average math skills, including ability to add, subtract, multiply and divide. • Simple oral communication skills: ability to read and comprehend instructions. • Must be physically able to handle heavy items including lifting, pushing, pulling, and positioning components up to 50 lbs. • Must be able to consistently stand for an entire 8 to 10-hour shift. • Ability to work in a team setting. • Reliable Requirements: Requirements • Some degree of CNC programming experience • Requires average math skills, including ability to add, subtract, multiply and divide. • Simple oral communication skills: ability to read and comprehend instructions. • Must be physically able to handle heavy items including lifting, pushing, pulling, and positioning components up to 50 lbs. • Must be able to consistently stand for an entire 8 to 10-hour shift. • Ability to work in a team setting. • Reliable Education and Experience • Minimum of three years' experience in a machine shop, or one-year experience in a machine shop if a vocational school graduate. • Knowledge of basic machining practices and materials is a plus, as is general mechanical knowledge.

Job Description The CNC Machinist will be responsible for production and post-processing of medical devices. Common secondary processes include cutting, deburring, media blasting, polishing, filing, cleaning, and packaging. This role will be focused on operating machine shop equipment including but not limited to CNC Mills, Turning centers, Wire EDMs and Bandsaws. 2nd Shift, Monday - Friday, 3 PM - 11:30 PM Essential Duties and Responsibilities Develop and maintain strong internal working relationships across restor3d. Understand the objectives, responsibilities, and mission of the Sterility & Lot Release department and work towards those goals. Prioritize and plan work activities; adapt for changing conditions. Operation of multi axis machines (3-axis mill/turn, 5-axis mill/turn and Wire EDM). Setting of tooling and making tool offsets. Run programs developed on CAM software such as Mastercam. Interpret engineering specifications and drawings. Perform equipment maintenance. Support transfer activities requiring CNC equipment. Ensure high quality production in adherence with industry standards. Create sustainable manufacturing processes, programs, and fixtures. Follow all appropriate safety precautions, including usage of PPE and maintaining facility cleanliness. Dimensional and visual inspection of manufactured goods as part of quality-controlled process. Collaborate with programmer and engineering to improve processes. Qualifications Highschool diploma or GED required. Associates or post-secondary education preferred. 3 years of CNC Mill or Lathe set up and operation. Minimum 4 years of machine shop experience. Proficiency with CAM and CAD software such as Mastercam and Solidworks. Strong attention to detail and mechanical aptitude. Ability to work in a regulated industry including adherence to good documentation practices and good quality practices. Strong visualization and analytical skills. Skills, Abilities, Competencies Required: Excellent written and verbal communication skills. Able to work accurately in a fast-paced, hectic, ever-changing environment with strong attention to detail. Demonstrated ability to monitor own work to ensure quality, accuracy, and thoroughness. Strong organizational, analytical, and time-management skills. Able to self-motivate and work both independently and as part of a team. Machine shop tooling such as cutters, bandsaws, and basic handheld tools . Working with CNC equipment such as Mill, EDM and lathe, furnaces, direct Metal Printers, polymeric 3D Printers, media blasting cabinets, testing frames, cleaning and inspection equipment. Position may involve handling of ultra-fine, medical grade, metallic powder, handling of other tooling, components, raw materials and waste material applicable to the manufacture of medical devices. Knowledge of respirator and fire-retardant PPE. Able to lift and carry up to 50 pounds. Operate while wearing protective equipment. Repetitive movements such as periods of standing, working with hands and tools, squatting, kneeling and moving up and down ladders.

Skill Source is a leading placement service specializing in manufacturing operations both on the production floor and front office. We work hard finding the right complimentary fit for both client and qualified candidates. We facilitate this by asking not just the right questions technically but the right questions to fit you personally. We have a substantial client base to work with so there is a very good chance we can find you the next step in a more satisfying career. Submit your hard earned resume today and let us see what we can do for you! Job Description CNC Surface Grinder Setup Machinist-Programmer needed on 1st or 2nd shift at our aerospace precision machining client near Burlington, MA. Direct-hire position, not a temp, with competitive compensation and benefits. Qualifications Requires HS diploma or GED plus 3 years minimum experience with Fanuc-controlled CNC surface grinders (especially Okamoto). Program, setup, operate, troubleshoot, minor editing (Okamoto conversational) needed. Prior experience training other machinists a major. plus. NOTE: Applicants not credibly possessing these qualifications will not be accepted for evaluation. Additional Information These are permanent positions NOT contract! Excellent pay (Pay commensurate with experience) and benefits packages! Some of our clients pay FULL medical! Please feel free to review our other opportunities at ***************************

Job Description Associate Mill - Lathe Machinist III / Programmer Responsibilities: Program, setup and operate computer numerically controlled (CNC) machine tools such as multi-axis lathes. Able to self-sufficiently take various metal types from raw stock to finished product. Familiar with today's technology of cutting tools and machining practices. Plans and lays out work from customer drawings and other specifications. Determines speeds, feeds, tolerances, and sequence of machine operations on a variety of machine tools or performs a complete sequence of operation. Makes all setups and adjusts machines, making trial cuts as necessary. Finishes metal by hand or machine. Uses such specialized measuring instruments as vernier calipers, micrometers, surface gages, profilometer, CMM, vision systems, and dial indicators. Utilizes trigonometric formulas in order to calculate complex and/or component angles and dimensions. Uses shop mathematics and standard handbook formulas in computing dimensions for planning and laying out work. Use computer and necessary software as required. Fusion360 is preferred. Mastercam is acceptable. Perform other duties as required. Qualifications: High school diploma or equivalent required. 5 years' experience preferred, but not required. The ability to work with others and a good work ethic, required. Candidate must be authorized to work in the United States on a full-time basis, required.

Job DescriptionDescription: Position will include but not limited to, set-up and maintaining production and quality on precision machined parts on manual, CNC milling, CNC turning and CNC screw machine tools. Operating multiple machines when required, programming tooling and fixtures of all machine tools. Works closely with Engineering and manufacturing to improve manufacturing processes and manufacturability of precision machined parts. Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product. Proficient with standard concepts, practices, and procedures within these fields. Relies on experience and judgment to plan and accomplish goals. Performs a variety of tasks. Works under little or no supervision. A certain degree of creativity and latitude is required. Typically reports to a supervisor/manager Requirements: May be required to meet certain certificates in the field and preferred to have at least 5-10 years of programming tooling and setup experience. Set up machinist for horizontal mills Manufacturing and machining background is necessary. CNC programming using Master-Cam and or Cam works software is preferable. Should be comfortable using new software programs. Must work well with others. Good interdepartmental work ethics are a must.

CNC Lathe Machinist III / Programmer Are you a skilled machinist who enjoys taking a project from raw material to a finished, high-quality product? We're looking for a CNC Lathe Machinist III / Programmer to join our team, where you'll work with advanced multi-axis lathes, cutting-edge tooling, and modern programming software to deliver precision parts. What You'll Do: Program, set up, and operate CNC multi-axis lathes. Take metal from raw stock to finished product with minimal supervision. Plan and lay out work directly from customer drawings and specifications. Determine proper speeds, feeds, tolerances, and machining sequences. Perform setups, make trial cuts, and fine-tune adjustments as needed. Use precision measuring tools (micrometers, calipers, CMM, vision systems, etc.) to ensure accuracy. Apply trigonometry and shop math to calculate complex angles and dimensions. Work with modern software like Fusion360 (preferred) or Mastercam. Contribute to a team environment while maintaining a strong personal work ethic. What We're Looking For: High school diploma or equivalent. 5+ years of CNC machining experience preferred (but we're open to less with the right skills and drive). Strong technical knowledge of machining practices and cutting tools. Ability to work independently while collaborating with a skilled team.

We are currently seeking skilled CNC Precision Machining Specialists to join our growing team. If you thrive in a fast-paced environment where no two days are the same from R&D prototyping to high-volume production we want to hear from you! What You'll Do: Set up and operate horizontal and vertical mills, 5-axis, and mill/turn CNC machines. Design and develop fixtures and workholding systems to optimize manufacturing processes. Program using G-code and Mastercam (training available for motivated candidates through Mastercam U). Uphold the highest quality standards by following AS9100 procedures and detailed documentation. Perform basic quality inspections using calipers, micrometers, height gauges, and other precision tools. Apply GD&T (Geometric Dimensioning & Tolerancing) principles for precise manufacturing outcomes. Collaborate closely with a talented, supportive team dedicated to continuous improvement. What We're Looking For: Proven experience setting up, operating, and/or programming CNC machines (vertical, horizontal, 5-axis, and mill/turn). Strong understanding of G-code programming. Familiarity with Mastercam (or willingness to learn through company-sponsored training). Knowledge of AS9100 quality standards and experience working within a documented system. Solid skills in using precision measurement and inspection equipment. Working knowledge of GD&T standards. A team-first attitude and a commitment to delivering outstanding results.

Second Shift: 3:30 PM - 12:00 AM - Monday - Friday 28.00 - 34.00 Hr. Under the general direction of the Production Manager, the primary role is to produce machined parts by setting up and operating a CNC machine; maintaining quality and safety standards, keeping records, and maintaining equipment and supplies. ESSENTIAL JOB FUNCTIONS* - Primary responsibilities include, but are not limited to the following: * Sets-up mills and lathes by installing and adjusting chucks, tools attachments, collets, bushings, cams gears, stops and pushers. * Loads feed mechanism by lifting stock into position * Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. * Maintains specifications by observing milling, drilling, grooving and cutting, including turning facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; trouble shooting processes, adjusting and reprogramming controls; identifying and sharpening/replacing worn tools; adhering to quality assurance procedures and processes. * Maintains safe operations by adhering to safety procedures and regulations. * Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions, troubleshooting malfunctions, calling for needed repairs. * Maintains continuity by documenting and communicating actions, irregularities and continuing needs. * Documents actions by completing production and quality logs. * Updates job knowledge by participating in educational opportunities; reading technical publications. * Accomplishes organizational goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. * Ability to assist and direct the cutting, machining, and configuration of complex block layouts prior to bonding to achieve final dimensional requirements. * Adhere to Business Management System requirements General * Conducts night time shutdown of machinery * Maintains a clean and organized work area and general housekeeping TYPICAL EQUIPMENT USED: * 3 or more axis machining center * Turning lathe * Various hand tools * Tape measures, calipers and other measuring devices * Carts, dollies and other heavy weight moving equipment OTHER DUTIES AND RESPONSIBILITIES * Ability to train employees in the routine operation of the CNC in order to function as a back-up and/or additional shift coverage operator. * Other related duties and projects as assigned. KNOWLEDGE, SKILLS & ABILITIES * High school diploma or GED * 3-5 years of experience in CNC machine operation o Demonstrated understanding of tool holders and tool types o Demonstrated understanding of differing feed and speed settings o Demonstrated understanding of tool path following/alternative paths * Conceptual skills * Basic math skills * Ability to operate & enter data into standard Windows based computers * Good verbal and written communication skills * Strong attention to detail * Good interpersonal skills * Analytical thinking/problem solving * Excellent organizational skills * Ability to multi-task and be dependable, flexible and adaptable to meet changing or multiple deadlines * Ability to take initiative to identify a problem, obstacle or opportunity and take action within the scope of the position, as authorized * Ability to exercise judgment to solve operational problems where the answer is not apparent * Mechanical aptitude * Process understanding on issues relating to mixing ingredients to make products * Ability to operate equipment (mixers, transfer tanks, ovens, saw, planer, lathe, milling, tumbler, dust collector, hand tools, fork lift) * Ability to read and understand QC inspection documentation * Visual acuity to identify surface quality defects 1/32" and larger WORKING CONDITIONS/PHYSICAL DEMANDS * Must be able to frequently lift and move up to 50 pounds * Regular exposure to noise, dust, high heat and chemicals To conform to U.S. Government export control regulations and the Naval Nuclear Propulsion Information restrictions, applicant must be a U.S citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorization from the U.S. Department of State or Department of Commerce. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.