Numerical control operator jobs in Colorado Springs, CO - 40 jobs

At CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking an Entry CNC Operator to join our Roll Shop team at our Pueblo, Colorado location. The Entry CNC Operator's primary function is to will be responsible for the dressing and turning of rolls for all our Rolling Mills, in a safe manner. Utilize and safely operate CNC lathe, CNC grinder, cutting tools, templates, hand tools, associated measuring tools, blueprints, Rolling Mill rolls, and necessary safety equipment Direct Bearing Buildup personnel to load and unload lathe Read Prints Select programs, templates, tools, and optimum operation of lathe or grinder Turns rolls and checks tolerances Handle rolls for shipment Provide information and technical assistance to the Rolling Mills Keeps work area and equipment clean and orderly Adhere to all appropriate standard operating procedures Observe all safety rules, lock out procedures Obtain and maintain OSHA 10 and equipment certifications, as required Coordinate and work with mill personnel in maintaining mill production, while operating all equipment needed to complete the job and utilizing necessary safety equipment Perform routine maintenance and assists maintenance personnel Notify supervision and maintenance personnel of all abnormal job and equipment conditions. Requirements Must be a qualified CNC operator with 3-5 years machining experience preferred Demonstrated ability to read prints 2 or 4 year degree in CNC Programming, Machining, or related field Knowledge of the tools and equipment used for industrial purposes Possess an understanding of the basic manufacturing process and familiarity with heavy industry, manufacturing, or mining; or a closely related field Ability to safely and appropriately operate, power and hand tools, machinery, and mobile equipment; 12 months experience preferred Competent in manipulating numbers, quantities, shapes and spaces; able to take simple measurements and perform basic mathematical operations (e.g., addition, subtraction, division, decimals, fractions) Ability to convey and understand information effectively and safely, including speaking over a public address system Ability to work in both inside and outside environmental conditions, with exposure to elevated noise levels, extreme heat and cold, physical hazards - close proximity to moving parts, hot surfaces, pinch points, sparks, sharp edges, high pressure air, oxygen and gas lines (atmospheric conditions may require the use of a respirator) Must be able to work in a physically demanding manufacturing environment, which will include but not be limited to repetition, climbing, kneeling, standing, crawling, consistent exertion of forces up to 50 pounds or more Must be willing to work varied shifts (3 shift rotation) and any days of the week Must be 18 years of age Valid driver's license preferred - required for certain positions within the scope of Steel Production Worker Candidates will be required to demonstrate aptitude through testing The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Open & Closing Dates: 10/2/25 - 3/1/2026 Compensation $28.67 - $30.85 per hour Shift differential #TAH Our total compensation package includes amazing benefits! Competitive wages and bonus opportunities Family medical, dental, and prescription coverage at minimal employee cost Short and long term disability programs Competitive retirement plans Flexible Spending and Health Savings Accounts Employer-provided and Voluntary Life Insurance options Paid vacation and recognized statutory holidays Apprenticeship and career advancement within the company Tuition reimbursement Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail ********************** or call: **************. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

: Under minimal supervision, provide programs for CNC punch presses, CNC laser, and CNC press brakes to manufacture parts as required to meet production plans and quality standards. Concurrently working with engineering and planning/procurement departments to ensure efficient operations and on time completions. Duties/Responsibilities: Read and interpret prints and solid models. Use Solid Works file packages to generate CNC code for punches and breaks from solid works models. Reduce setup and punching/bending times through process improvements. Manage, maintain, and deploy tooling when developing programs. Generate setup sheets. Provide feedback and input into process improvement within the department. Write programs for new products ensuring compliance with all quality policies, solid models, prints, specifications, regulations and instructions. Ensure input and output department files are completed in a timely manner. Recommend improvements to reduce production costs while maintaining high quality standards. Program, organize, log, update and maintain new and existing part files to the latest rev. level. Other Duties and Responsibilities: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. This is a designated safety-sensitive position. Required Skills/Abilities: Experience with Solid Works is required. Experience with Solid Works PDM is preferred. Must have knowledge of punch tooling. Must have knowledge of brake tooling. Experience in calculating K factors and bend allowances into flat patterns Must be able to read and interpret technical drawings. Knowledge of geometric dimensioning and tolerancing is required. Must be able to perform basic mathematic computations such as fractions, percentages, ratios and proportions to apply to practical situations. Shop math, geometry and trigonometry. Must be able to define problems, collect data, establish facts and draw valid conclusions. Must be able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must be familiar with quality standards (ISO9001). Must be able to effectively communicate and understand job instructions both verbally and written. Must be able to interpret and translate instructions to other employees in a professional and respectful manner. Must be able to troubleshoot and advise solutions regarding machining, work holding solutions and speeds and feeds. Must be able to read, understand and follow department and company policies. Must be able to communicate positively and effectively with employees in other departments. Must be able to read, understand and follow written directions. Education and Experience: Must have at least 5-10 years of sheet metal experience. Prefer at least 3 years operating a turret punch press. Prefer at least 2-5 years' experience in programming in Tumpf or related CNC software. High school diploma or equivalent required. Engineering degree a plus. Job Type: Full-time Hours: 1:00pm to 9:30pm Pay: $25.00 - $33.00 per hour Skyline Products is an Equal Opportunity Employer; all decisions are made without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, sexual orientation, gender identity, or any other legally protected status. Powered by JazzHR DGH54Qaj7a

We are looking for a Cyber Tools Specialist to support our client in Colorado Springs. This position is responsible for the development and implementation of Cyber TPs in the NT labs, the Testbed (CTB), and Ops. Tasks include: installing, deploying, and unit testing Cyber Products (e.g., CyberArk, HBSS, ACAS, ArcSight, MFA, BigFix, Endgame, KMS, etc.). Providing redlines to COS engineers and feedback to Cyber Leadership will be required as part of position responsibilities. Documenting lessons learned, best security engineering practices, and industry standards will be required in daily tasks as well. The Cyber Tools Specialist will support the Cyber Tools team as part of the Platform and Infrastructure (P&I) ART. Experience Required The position requires a strong knowledge of Cyber technology and DoD information assurance system certification. Requires hands-on experience utilizing patch management, scanning & auditing, security event monitoring, host-based security and multi-factor tools in an integrated lab environment. Excellent technical document preparation skills and verbal communications are required for presentation of technical Cyber issues and reports to Agile Release Train (ART) leadership. Technical Skills Required The position requires the following Cyber Engineering skills: technical trouble shooting of software applications and integrating COTS products, data analytics of system vulnerabilities and mission impacts, and risk mitigation resulting in system accreditation. Must have working knowledge of implementing DISA STIGs and GPOs. Experience with Agile Lifecycle utilizing Risk Management Framework (RMF) is a plus. Education Required Bachelors degree in an engineering discipline or equivalent years of experience. Required - DoDI 8570 certification (e.g., GSEC, Security+, SCNP, SSCP). DoD IAT Level II Required Secret Clearance Required

Job Description CNC Swiss Operator I Reports to: Swiss Production Supervisor Department: Swiss Department This job exists to make high precision, close tolerance medical housings on CNC Swiss lathes. This is an entry-level position. Bal Seal Engineering delivers advanced sealing, connecting, and contact solutions that serve medical, aerospace, energy, and industrial markets. Our proprietary spring-energized seals and electrical contacts help customers achieve precision, efficiency, and reliability. Employees thrive in a culture that values craftsmanship, technical mastery, and close partnership with customers solving complex challenges. Essential Duties and Responsibilities: Sets up and operates CNC Swiss machines Produces medical housings, in a timely manner, in accordance with blueprints, sketches, and work orders, with close supervision Inspects and measures micro parts with general measuring devices, and makes machine offset adjustments Performs setups, changeovers, and tool offsets on multiple CNC Swiss machines with close supervision Maintains a clean and organized work area, adhering to our established quality and safety standards Performs visual and physical inspection of parts produced Make necessary adjustments to maintain nominal print dimensions and required surface finishes Completes electronic and paper-based records with speed and accuracy Monitor machine performance, identify deviations, and make appropriate adjustments as needed Assist with maintenance and repair of equipment Perform other related duties as assigned Education: High School Diploma or GED required Certificate or diploma in machining a plus Familiar with CI Improvement/Lean a plus Experience: Some work experience desired Specialized machinist training and/or certification a plus Experience with Swiss turning a plus Familiarity with Tsugami Swiss lathes a plus Knowledge, Skills and Abilities: Able to handle small parts Experience working with microscopes, toolmaker's scopes, and other precision measurement methods and equipment Proficiency in interpreting blueprints, drawings, and technical specifications Familiar with Statistical Process Control (SPC) Effective communication and teamwork skills Excellent troubleshooting and decision-making skills Strong attention to detail and quality-oriented Physical Requirements: Frequent lifting and/or moving items up to 25lbs Required to reach with hands and arms to handle documents and products Must be able to enter data into a computer by use of a keyboard and mouse Work Environment: The work environment conditions are typical of a manufacturing environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the basic functions. The noise level in the work environment ranges from quiet to moderate, however, hearing protection may be required if employee enters high noise areas as a part of their normal job duties. Benefits: At Bal Seal Engineering (BSE) we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. BSE is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Job DescriptionDescription: The Milling Laborer plays a crucial role in the construction industry by assisting in the preparation and processing of materials used in various construction projects. This position involves operating milling machines and other equipment to ensure that materials are cut and shaped to meet project specifications. The end result of this role is to contribute to the overall efficiency and quality of construction work, ensuring that projects are completed on time and to the required standards. The Milling Laborer will also be responsible for maintaining a safe and organized work environment, adhering to all safety protocols and regulations. Ultimately, this position is vital for the successful execution of construction tasks, impacting the overall progress and quality of the project. Minimum Qualifications: High school diploma or equivalent. Previous experience in a labor-intensive role, preferably in construction or manufacturing. Basic understanding of milling machinery and tools. Preferred Qualifications: Certification in operating milling machines or related equipment. Experience with construction safety practices and protocols. Ability to read and interpret blueprints and technical drawings. Responsibilities: Operate milling machines and other equipment to cut and shape materials according to project specifications. Assist in the setup and calibration of milling machines to ensure optimal performance. Monitor the milling process to ensure quality control and make adjustments as necessary. Maintain a clean and organized work area, ensuring all tools and equipment are properly stored. Adhere to safety protocols and regulations to promote a safe working environment. Skills: The required skills for this position include a strong understanding of milling machinery, which is essential for operating and maintaining equipment effectively. Attention to detail is crucial, as the Milling Laborer must ensure that materials are processed accurately to meet project specifications. Physical stamina and strength are necessary for handling heavy materials and operating machinery throughout the workday. Preferred skills, such as the ability to read blueprints, enhance the Laborer's capability to understand project requirements and execute tasks accordingly. Overall, a combination of technical skills and physical abilities will enable the Milling Laborer to contribute significantly to the success of construction projects. Requirements:

Overview/ Job Responsibilities Sev1Tech is seeking a SATCOM Transmissions Control Operations Technical Support and Analysis SME to support the US Space Force, Space Operations Command (SpOC), Space Delta 8. Space Delta 8 is the SATCOM war-fighting lead for the US Space Force and leads the operation, maintenance, and modernization of the Wideband Global SATCOM System (WGS) with points of presence located at multiple sites CONUS and OCONUS, providing the day-to-day operational support needed to manage DoD's satellite communications capabilities. Responsibilities include, but not limited to: * Providing SATCOM transmissions control and operations technical support and analysis services and technical assistance as needed to operations personnel to analyze SATCOM transmissions, configurations of SATCOM accesses, and link performance of these SATCOM accesses Minimum Qualifications * US Active Top Secret or TS/SCI level clearance (eligible for immediate adjudication by the cognizant security authority) * Bachelor's degree * Minimum 15 years experience with providing SATCOM transmissions control, operations technical support, and analysis services About Sev1Tech LLC Welcome to Sev1Tech! Founded in 2010, we are proud to be a leading provider of IT modernization, engineering, and program management solutions. Our commitment is to deliver exceptional program and IT support services that empower critical missions for both Federal and Commercial clients. At Sev1Tech, our mission is clear: Build better companies. Enable better government. Protect our nation. Build better humans across the country. We believe that through innovation and dedication, we can make a significant impact on the communities we serve. Join the Sev1Tech family, where your potential for greatness is limitless! Here, you will not only achieve remarkable accomplishments but also enjoy a fulfilling and rewarding career progression. We invite you to explore opportunities with us and become part of a team that values your contributions and growth. Ready to take the next step? Apply directly through our website: Sev1Tech Careers and use the hashtag #join Sev1Tech to connect with us on social media! For any additional questions or to submit referrals, feel free to reach out to ***********************.

Night Shift - 4:00 pm to 2:45 am - Monday through Thursday - 10 hour shifts Pay Range - $19.00 to $25.00 plus shift differential Job Description Summary: Responsible for operating CNC machines to cut metal and plastic parts making sure finished parts are within dimensions and tolerances listed on product drawings. Primary Responsibilities: Ability to set up and calibrate fixtures prior to loading parts and programs. Load materials, such as blocks of steel, aluminum, or plastic into CNC machines to be cut. Download CNC programs and perform test operations to ensure parts are made to specifications. Consult supervisor about possible adjustments to operating speed based on vibrations and sounds. Ability to modify existing programs as needed. Inspect fabricated part to make sure it is within dimensions and tolerances set. Communicate problems to supervisor and suggest improvements. Responsible for deburring own parts Safety, cleanliness of equipment and company product Simple maintenance as required Clean work area as needed Qualifications: Three years' minimum experience as a CNC Machinist. Experience working with lathes is a plus. Experience operating a surface grinder a plus Experience working with HAAS machines is a plus. Experience with “G” Code programming is a plus. CNC Certification training a plus Able to perform full setups and very light program editing at the machine. Able to read drawings and/or job travelers. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read calipers, tape measures and micrometers. Ability to work independently and in a team environment. Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, or Hearing Protection. Spend long hours standing. Time pressure and time management demands Exposed to Contaminants (such as pollutants, gases, dust or odors). Noise Level can be distracting or uncomfortable.

We are currently looking for a CNC Lathe Swiss Machinist to join our Swiss/CNC team. We're Bal Seal Engineering, and we create custom sealing , connecting , conducting and EMI shielding engineered solutions. Our canted coil springs and spring-energized seals enhance the performance and reliability of customers' products. We're more than a canted coil spring manufacturer. By applying our unique Bal Seal Canted Coil Spring technology and material science expertise, we provide OEMs and tier suppliers everywhere with innovative, custom-engineered sealing, connecting, conducting and EMI shielding and grounding solutions. What differentiates us from other canted coil spring manufacturers is our more than 120 active U.S. and foreign patents, as well as our desire to continuously create new solutions that enable our customers to propel technology forward. In many cases, we've helped to reshape industry standards - or set new ones. You and our customers will work closely together to rapidly apply new solutions, even develop new materials, in order to meet specific application and manufacturing needs. _______________________________________________________________________ This position exists to machine micro components on CNC Swiss Turn machines. Root of the job title (i.e. Sr. Administrative Clerk root title would be Sr. Clerk) CNC Machinist ESSENTIAL/MAJOR ELEMENTS OF POSITION • Sets up and operates CNC Swiss machines.• Produces medical housings in a timely manner in accordance with blueprints, sketches,and work orders with minimal supervision.• Inspects and measures micro parts with general measuring devices and makes machineoffset adjustments.• Occasionally, the incumbent will be asked and expected to perform various,miscellaneous, and non-standard duties as required. Such duties are diversified in natureand may be changed from time to time to suit the needs of the company. Skills, Knowledge and Abilities Necessary to Successfully Perform this Position: • Ability to handle small parts • Able to read and write English • Basic math and the ability to read blue prints and work orders • Good communication skills • Solid troubleshooting skills Education Level Desired : High School Diploma or GED Prior Experience Desired : • Minimum 5+ years of operating and set-up experience on CNC machines • Familiar with statistical process controls (SPC) Full-Time Employees receive: Medical, dental, vision, life insurance, etc. Matching 401K Employee Stock Purchase Plan Paid Vacation Paid Sick Leave Tuition Reimbursement 10 paid holidays per year Summer Picnics, Holiday Parties and other employee engagement events Pay: $16.00 to $24.00 per hour, depending on experience. To apply for this position, please visit our company website at *********************** Work Environment: The work environment conditions are typical of both an office and a manufacturing environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the basic functions. The noise level in the work environment ranges from quiet to moderate, however, hearing protection may be required if employee enters high noise areas as a part of their normal job duties. Bal Seal Engineering offers an excellent and competitive compensation and benefits package including medical, dental, vision, paid holidays and 401K with Company match. Bal Seal Engineering is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age or national origin. Bal Seal Engineering is an ITAR compliant company. To be considered, applicants must be able to meet ITAR certification requirements.

CNC Swiss Operator I Reports to: Swiss Production Supervisor Department: Swiss Department This job exists to make high precision, close tolerance medical housings on CNC Swiss lathes. This is an entry-level position. Bal Seal Engineering delivers advanced sealing, connecting, and contact solutions that serve medical, aerospace, energy, and industrial markets. Our proprietary spring-energized seals and electrical contacts help customers achieve precision, efficiency, and reliability. Employees thrive in a culture that values craftsmanship, technical mastery, and close partnership with customers solving complex challenges. Essential Duties and Responsibilities: Sets up and operates CNC Swiss machines Produces medical housings, in a timely manner, in accordance with blueprints, sketches, and work orders, with close supervision Inspects and measures micro parts with general measuring devices, and makes machine offset adjustments Performs setups, changeovers, and tool offsets on multiple CNC Swiss machines with close supervision Maintains a clean and organized work area, adhering to our established quality and safety standards Performs visual and physical inspection of parts produced Make necessary adjustments to maintain nominal print dimensions and required surface finishes Completes electronic and paper-based records with speed and accuracy Monitor machine performance, identify deviations, and make appropriate adjustments as needed Assist with maintenance and repair of equipment Perform other related duties as assigned Education: High School Diploma or GED required Certificate or diploma in machining a plus Familiar with CI Improvement/Lean a plus Experience: Some work experience desired Specialized machinist training and/or certification a plus Experience with Swiss turning a plus Familiarity with Tsugami Swiss lathes a plus Knowledge, Skills and Abilities: Able to handle small parts Experience working with microscopes, toolmaker's scopes, and other precision measurement methods and equipment Proficiency in interpreting blueprints, drawings, and technical specifications Familiar with Statistical Process Control (SPC) Effective communication and teamwork skills Excellent troubleshooting and decision-making skills Strong attention to detail and quality-oriented Physical Requirements: Frequent lifting and/or moving items up to 25lbs Required to reach with hands and arms to handle documents and products Must be able to enter data into a computer by use of a keyboard and mouse Work Environment: The work environment conditions are typical of a manufacturing environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the basic functions. The noise level in the work environment ranges from quiet to moderate, however, hearing protection may be required if employee enters high noise areas as a part of their normal job duties. Benefits: At Bal Seal Engineering (BSE) we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. BSE is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Front Range Staffing is seeking CNC Machinist / Mechanical Assembler for a full-time, temp-to-hire opportunity in Colorado Springs, CO. Pay: $19.00 - $21.00/hour, based on experience Schedule: Monday-Friday, 8-5pm An ideal candidate for this company would possess the following skills and experience: 1+ years mechanical/electrical assembly, machining, in a manufacturing environment. Basic to advanced wiring of electrical components and understanding of single-phase and three-phase motor connections. Ultrasonic welding of plastic components. Ability to use a CNC Router and Lathe. Use of measuring tools such as calipers for accuracy and quality assurance. Strong attention to detail and quality, with the ability to work independently and follow safety protocols. Willingness to learn and progress. Ability to lift components up to 75 lbs, assisted and unassisted. Front Range Staffing offers some great benefits, to include: Health, Dental & Vision Life Insurance Long Term/Short-Term Disability Sick Pay 401K Bereavement Pay Employee Referral Program If you're interested in this position, please submit your resume to jobs@frontrangestaffing.com and then call for immediate consideration. Front Range Staffing is a progressive employer that strives to have an inclusive culture of Equal Opportunity within our workforce regarding diversity of race, religion, sexual orientation, age, gender, gender identity, or national origin. Front Range Staffing Ph: (719) 323-6632 www.frontrangestaffing.com

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description 2:00 pm to 10:30 pm Likely to convert to FT Possblie OT, mandatory PPE - safety glasses, steel toe shoes Responsibilities: Follows all policies and guidelines regarding workplace safety and product quality. Successfully completes all site-specific training regarding safety and quality. Receives components or items for assembly and/or test in programmed sequence Assembles mechanical or electrical components by means of sensitive hand and equipment coordination Assembles all variations of in-house standard products Follows assembly/test instructions, e.g. color code, PVC solvent welding and thread taping. Uses simple hand or power tools along with uncomplicated jigs and fixtures Enter work hours in ERP system (Currently SAP), if applicable to site Completes required documentation relative to production and quality Drives continuous improvement process and conducts daily housekeeping/5S audits to ensure continuous improvement activities. May read and interpret blueprints (product specific) Maintains equipment and area in a clean safe condition Will plumb variations of standard and custom products Occasionally assist with in house plumbing mechanical work Uses simple hand or power tools along with complicated jigs and fixtures Update and redline drawings as required Requirements: Minimum 6 months relevant experience required. Must have PVC experience Mechanical, electrical and pneumatic experience a PLUS Ability to troubleshoot and rebuild filter presses highly preferred Ability to read and interpret blueprints (if applicable) Proficient in the use of hand tools High school diploma or GED

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required MACHINIST II JOB DESCRIPTION: Our Specialty Seating Systems is recognized as a leading designer, developer, and manufacturer of a broad spectrum of aerospace specialty seating products. We recruit the best talent and use the best processes to solve some of the industry's greatest challenges - safely, ethically, and responsibly. We are looking for a highly motivated individual to join our team. How our people perform is as important as how our products operate. This is an entry level Machinist II position in the Fabrication Department. Performs function under minimum supervision and are responsible for making aircraft components to customers' specifications and development of work techniques. What you will do: Notifies Lead/Supervisor of quality discrepancies or equipment malfunctions Start Certified Operator Training Interpret WO instructions and BOM information Understands proper use of calibration tools Understands preventative maintenance and maintains TPM requirements Performs Routine/Repetitive tasks that require little judgement Load and start CNC programs at machines as needed Be proficient in Deburr, Sand Blast, Bench Drill and Sheer Performs Minor machine adjustments to meet print specifications Performs deburring, drilling and other secondary operations. Meets or exceeds required output hours Performs general skills with hand and power tools Begins to cross-train on other fabrication work centers Utilizes SAP for job specific tasks (order moves, inventory management) Understand Notes, Flags, and Specs on Drawings Properly determines the cause of quality discrepancy Follows established procedures on routine work but requires instructions on new assignments Requirements you must have: Degree Requirement: High School Diploma or GED 2 years relevant prior manufacturing experience Preferred Qualifications: Ability to understand and perform job duties to meet quality criteria. Attention to detail. Ability to read and understand engineering drawings & work instructions with some supervision. Basic Computer Skills Basic Shop Math Skills Willing to cross train in other areas. Demonstrated ability to work in a team environment. Must be able to work in a standing position up to 8 hours per day. Attendance Standards: Consistently be at work and communicate appropriately any attendance issues with your supervisor as per Attendance policy . Consistently at their workstation at the appropriately scheduled time. Does not abuse breaks and/or departure times. What We Offer: Some of our competitive benefits package includes: Medical, dental, and vision insurance. Three weeks of vacation for newly hired employees. Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option. Tuition reimbursement program. Student Loan Repayment Program. Life insurance and disability coverage. Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection. Birth, adoption, parental leave benefits. Ovia Health, fertility, and family planning. Adoption Assistance. Autism Benefit. Employee Assistance Plan, including up to 10 free counseling sessions. Healthy You Incentives, wellness rewards program. Doctor on Demand, virtual doctor visits. Bright Horizons, child and elder care services. Teladoc Medical Experts, second opinion program. And more! Learn More & Apply Now! Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? WE ARE REDEFINING AEROSPACE. *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Responsibilities: Set up and operate 3 and 5 axis milling machines to produce precision parts according to specifications Read and interpret engineering drawings, blueprints, and technical documents Inspect finished products to ensure they meet quality standards and specifications using a variety of measurement tools Collaborate with engineers and other team members to optimize machining processes Maintain a clean and organized work area Adhere to all safety protocols and procedures Qualifications: Required Experience High school diploma or equivalent; technical degree, military training or certification in machining or a related field preferred Minimum of 5 years of experience operating 3 and 5 axis milling machines Experience with tight tolerances and precision parts Knowledge of GD&T Experience with metrology/measuring tools Strong understanding of machining principles and techniques Excellent problem-solving skills and attention to detail Ability to read and interpret technical drawings and blueprints Strong communication and teamwork skills Ability to work independently and manage time effectively Desired Experience Experience with CAD/CAM software Tool Grinding Experience with Swiss style lathes Experience with advanced metrology equipment such as CMMs Experience with NPI Physical Requirements: Ability to lift and move materials up to 35 pounds Prolonged periods of standing and working with machinery Good hand-eye coordination and manual dexterity

Check out who we are! Job Title: Sr. Machinist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Reimbursement Relocation Assistance Available) Remote: On-Site Pay Range: $27.25-$30 Hourly About Gulftech international Our companies are the world's recognized leaders in the engineering, manufacture, lease, sale, and service of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers each of which is the leader in their respective markets throughout the world. Job Summary Efficiently, effectively, safely, and independently set up, adjust, troubleshoot, and operate a variety of MANUAL MACHINE TOOLS including lathes and mills producing parts to exacting tolerances and dimensions at production rate (very tight tolerancing) This is a low-volume and high mix production environment. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Interpret complicated blueprints, sketches, and engineering specifications. Determine the sequence of operations, number of cuts required, and method of setup. Select, mount, and align various specialized machine attachments and standard or improvised tooling. Make necessary and correct machine adjustments to improper machine functioning or cutting action. Measure, mark, and scribe dimensions and reference points on material or work pieces as guides. Calculate and set controls to regulate machining factors, such as speed, feed, coolant flow, and depth/angle of cut. Accurately monitor and verify quality in accordance with statistical processes or other control procedures. Use a variety of machinist hand tools and precision measuring instruments. Understand materials and applications as required. Solve problems relative to the work-holding arrangement, unusual materials, machine setting, tools, product specifications, and fabrication methods for the production process. Align and fasten work using standard fixtures and established methods. Install and adjust cutting tools consistent with the type and size of material being machined. Adjust feeds, speeds, and depth of cut to machine quality parts, per documentation. Inspect parts for conformance to specifications using measuring instruments such as gages, calipers, micrometers, and comparators. Visually inspect parts for burrs or damage machined surfaces. Maintain equipment to ensure cleanliness, accuracy, and reliability specific to requirements. Implement lean initiatives by identifying and providing suggestions on areas for improvement. Effectively apply lean concepts and tools in the work area. Observe all company policies and procedures, including safety rules, and maintain a clean and orderly work area. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

THE ROLE:Our site in Colorado Springs, Arrowswest, is seeking a Machinist III to join our team.As a machinist in the Extreme Ultraviolet (EUV) production department you are an essential part in helping Entegris be part of the future of Innovation. The EUV department produces EUV pods that are utilized by our customers during their manufacturing processes. In this role, you will both set up and operate CNC machines and actively troubleshoot any technical challenges that may arise during production.HOURS FOR THIS POSITION ARE 3PM-11:30PM MONDAY THROUGH FRIDAY WHAT YOU'LL DO: Complete the setup of Makino, Hass and other CNC equipment. Operate other pieces of equipment like Tumblers, Flatness gage and gluing systems. This includes precise calibration, correct tooling selection and configuration, program loading and verification, and adjustments for material - specific requirements. Correctly identify safety concerns with the setup (or more tenured) machinist. Follow machinist ergonomic procedures and utilize tools safely. Properly load tools with correct tool holder. Troubleshoot CNC machinery based on dimensional issues with produced components. Interact, support, and assist operators with machining related issues. Actively offer guidance related to machining processes. Utilize single block and rapid override during transverse movement during setup to observe step-by-step machine operation. Read, understand, and adhere to Work Orders, Standard Operational Systems and Gantt Chart to ensure production schedule and priorities are met accordingly. Monitor and troubleshoot production issues as they arise throughout the manufacturing process. Verify products visually and take corrective action when necessary. Ensure product is consistent with established specifications by utilizing Coordinate-measuring Machines (CMMs) and Camline software. Read and understand G&M CNC code used in CNC machinery. Read and understand G-Code CNC programming language. Generate hour by hour chart for work order output, downtime, critical information as tool changes. May use G-code regularly for standard machining tasks. Update systems as necessary. Daily, by work order, by plate etc. Update Master Cycle Sheets (MCS) for PT to review. Set up and safely operate 3-axis manual machinery (Lathe, mill, saw). Installing the correct tooling, understanding work order requirements, surface finishing, and correct measuring of dimensions after machining part. Foster a sense of accountability for all activities related to 5s principles and continuous improvement. Perform other duties as assigned to support team and organizational goals WHAT WE SEEK: High school diploma or equivalent REQUIRED 2-year technical degree or 4 years equivalent preferred 5+ years' experience working in a manufacturing setting Ability to set up, at least two (2) of the following CNC machinery: Makino, Hass, Mori. This includes precise calibration, correct tooling selection and configuration, program loading and verification, and adjustments for material-specific requirements. For Makino: Capable of installing static tools, touch off live tool, set Z zero, and using single block and rapid override during setup. Proficiency in reading and understanding G code Strong mechanical aptitude and machine troubleshooting skills Knowledgeable about powered hand tools Advanced computer and data entry skills Knowledgeable of common G&M codes Ability to troubleshoot minor issues in Language programming Ability to perform simple (circular) operations using codes like G02 and G03 for circular movements and M03 and M04 for spindle control Ability to understand MD04 transaction code and knowing when it's appropriate to terminate a job early. SAP, MES, PULSE, Camline, PCDMIS. Proficiency with Microsoft Office software (Word, Excel, etc.) Ability to communicate effectively and work in a team setting. Astute attention to detail and commitment to maintaining high-quality standards. Proven ability to execute manufacturing processes within a tight tolerance. Ability to understand documented processes and procedures. Overall commitment to continuous improvement, quality, operational excellence and safety Must be able to stand and walk for the duration of the shift. Must be able to lift up to 50 pounds. Ability to visually detect quality defects. Ability to use measuring devices, hand tools and power tools, this role involves frequent pinching and grasping Ability to repetitively pinch and grasp hand tools, repetitively twist, bend and reach upward and handle small screws, washers, fasteners, etc. Work is performed in an environment with moderate to high noise levels. Personal Protective Equipment (PPE) is required to be always worn while on duty. This includes safety glasses and steel-toed shoes. WHY WORK AT ENTEGRIS?Lead, Inspire, Innovate. Define Your Future Not everyone who works for a global company shares the same background, experiences and perspectives. We leverage the differences of our employees to bring new ideas to the table. Every employee throughout the company is encouraged to share input on projects and initiatives. Our decision-making process is truly a collaborative effort as we realize there are leaders at every level of the organization. We put our values at the core of how we operate as an organization - not just when it's convenient, but in a lasting and meaningful way. We want the time and energy you spend here to have a positive impact on your life inside and outside of the office.WHAT WE OFFER:Our total rewards package goes above and beyond just a paycheck. Whether you're looking to build your career, improve your health, or protect your wealth, we offer generous benefits to help you achieve your goals. Compensation: $25-$35 hourly range with actual pay dependent on candidate overall skills for the role. Shift Differential of $1.50 hour. $3000 sign on bonus Annual Bonus Eligible 3 weeks of vacation to take the time you need to recharge Generous 401(K) plan with an impressive employer match with no delayed vesting Excellent health, dental and vision insurance packages to fit your needs Education assistance to support your learning journey Values-driven culture with colleagues that rally around People, Accountability, Creativity and Excellence The company anticipates the application window closing approximately 5 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require Company to shorten or extend the application window Entegris does not provide immigration-related sponsorship for this role. Do not apply for this role if you need Entegris immigration sponsorship (e.g., H1B, TN, STEM OPT, etc.) now or in the future.At Entegris we are committed to providing equal opportunity for all employees and applicants. Our policy is to recruit, hire, train, and reward employees for their individual abilities, achievements, and experience without regard to race, color, religion, sexual orientation, age, national origin, disability, marital or military status.#LI-DM1

Under minimal supervision, provide programs for CNC punch presses, CNC laser, and CNC press brakes to manufacture parts as required to meet production plans and quality standards. Concurrently working with engineering and planning/procurement departments to ensure efficient operations and on time completions. Duties/Responsibilities: Read and interpret prints and solid models. Use Solid Works file packages to generate CNC code for punches and breaks from solid works models. Reduce setup and punching/bending times through process improvements. Manage, maintain, and deploy tooling when developing programs. Generate setup sheets. Provide feedback and input into process improvement within the department. Write programs for new products ensuring compliance with all quality policies, solid models, prints, specifications, regulations and instructions. Ensure input and output department files are completed in a timely manner. Recommend improvements to reduce production costs while maintaining high quality standards. Program, organize, log, update and maintain new and existing part files to the latest rev. level. Other Duties and Responsibilities: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. This is a designated safety-sensitive position. Required Skills/Abilities: Experience with Solid Works is required. Experience with Solid Works PDM is preferred. Must have knowledge of punch tooling. Must have knowledge of brake tooling. Experience in calculating K factors and bend allowances into flat patterns Must be able to read and interpret technical drawings. Knowledge of geometric dimensioning and tolerancing is required. Must be able to perform basic mathematic computations such as fractions, percentages, ratios and proportions to apply to practical situations. Shop math, geometry and trigonometry. Must be able to define problems, collect data, establish facts and draw valid conclusions. Must be able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must be familiar with quality standards (ISO9001). Must be able to effectively communicate and understand job instructions both verbally and written. Must be able to interpret and translate instructions to other employees in a professional and respectful manner. Must be able to troubleshoot and advise solutions regarding machining, work holding solutions and speeds and feeds. Must be able to read, understand and follow department and company policies. Must be able to communicate positively and effectively with employees in other departments. Must be able to read, understand and follow written directions. Education and Experience: Must have at least 5-10 years of sheet metal experience. Prefer at least 3 years operating a turret punch press. Prefer at least 2-5 years' experience in programming in Tumpf or related CNC software. High school diploma or equivalent required. Engineering degree a plus. Job Type: Full-time Hours: 1:00pm to 9:30pm Pay: $25.00 - $33.00 per hour Skyline Products is an Equal Opportunity Employer; all decisions are made without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, sexual orientation, gender identity, or any other legally protected status.

that has longevity with a great company? Do you excel in an environment that requires problem solving and varying electrical tasks? Can you work well in a team environment or independently with no supervision? If you answered yes to these questions, we are looking for someone like you to join our growing team at Diversified Machine Systems as an CNC Machinist! Diversified Machine Systems is a privately held corporation with headquarters located in Colorado Springs, Colorado. We are an industry-leading designer and American manufacturer of 3-axis and 5-axis CNC Routers and machine solutions. We supply machines to a wide variety of manufacturing sectors including aerospace, automotive, marine, recreational vehicles, 3D sculpture, concept models, pattern making, formed plastic and woodworking among others. Diversified Machine Systems also offers an extensive benefits package including 401k with company match, dental, medical, PTO, sick leave, and advancement opportunities. Schedule: 1 and 2nd Shift Available 1st Shift = Monday thru Thursday 7:00am - 4:45pm (45 min lunch) Friday 7:00am - 11:00am 2nd Shift = Monday thru Thursday 4:00 pm to 2:45 am (45 min lunch) Salary: $19.00 to $25.00 Per Hour - Depending on Experience Job Description Summary: Responsible for operating CNC machines to cut metal and plastic parts making sure finished parts are within dimensions and tolerances listed on product drawings. Primary Responsibilities: Ability to set up and calibrate fixtures prior to loading parts and programs. Load materials, such as blocks of steel, aluminum, or plastic into CNC machines to be cut. Download CNC programs and perform test operations to ensure parts are made to specifications. Consult supervisor about possible adjustments to operating speed based on vibrations and sounds. Ability to modify existing programs as needed. Inspect fabricated part to make sure it is within dimensions and tolerances set. Communicate problems to supervisor and suggest improvements. Responsible for deburring own parts Safety, cleanliness of equipment and company product Simple maintenance as required Clean work area as needed Education/ Skills/Physical Job Requirements: Three years' minimum experience as a CNC Machinist. Experience working with lathes is a plus. Experience operating a surface grinder a plus Experience working with HAAS machines is a plus. Experience with “G” Code programming is a plus. CNC Certification training a plus Able to perform full setups and very light program editing at the machine. Able to read drawings and/or job travelers. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read calipers, tape measures and micrometers. Ability to work independently and in a team environment. Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, or Hearing Protection. Spend long hours standing. Time pressure and time management demands Exposed to Contaminants (such as pollutants, gases, dust or odors). Noise Level can be distracting or uncomfortable. We look forward to hearing from you.

Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law