Numerical control operator jobs in Lakewood, OH

**Shift:** 2nd At this level the associate is able to perform more complex duties per standard work including process changeovers and troubleshooting with minimal guidance or help from a trainer or support. They are able to recognize and solve some non-routine problems. **Essential Duties & Responsibilities** : -Complete set-up and operation of machining equipment in a safe and efficient manner. -Perform start-stop procedures including, but not limited to: machine and conveyor start-up, loading of raw material, and machine shutdown. - Perform simple and advanced changes, adjustments, and set-up to tooling and fixtures. - Complete records and forms. - Check machined parts visually and dimensionally according to quality standards. - Clean chips from tooling and parts. - Recognize and report machine malfunctions and part discrepancies to supervisor. - Preset tooling as required. - Set-up parts, process and machine as required. - Perform daily, semi-annual and annual machine maintenance. - Correct problems in set-up, non-conformance, tooling and machining processes. - Make suggestions for process changes that may improve machining operations. - Maneuver around machine, includes but may not be limited to standing, bending, stretching and walking. - Repair, replace and/or modify the equipment if required. **Education and/or Work Experience Requirements** : **Required** : -High school diploma or equivalent -External: Minimum of 30 months of applicable machining experience. -Internal: Must be fully qualified as a Level 2 Machine Operator -Advanced knowledge about metal or plastic cutting processes and equipment -Self-motivated and able to learn at a fast pace. -Demonstrates proficient machining, communication, and troubleshooting. -Operate machine: that includes loading and unloading parts, inspection gages, comparator, micrometers, calipers, 6" rule, dial indicator, ring gages, drill/reamer, Johnson gages and Datum gages, magnifier and lights, miscellaneous hand tools and chip strippers. -Identifies and corrects machining problems relative to tools and tool holders, collets and chucks. **Critical Competencies** : Customer Focus -Direct and assist others in getting required support work completed in a timely manner -Independently display prioritization skills -Understand and anticipate the internal customers' needs and initiate action to meet them -Meeting customer needs is their driver Reliability and Integrity -Drives improvements and helps others make a positive impact on quality and plant metrics -Along with providing it themselves, encourages others to provide reliable information -Acts as a direct liaison with product, process and quality Engineers to ensure appropriate application of technology -Supports organizational changes positively through actions and words Flexibility -Always willing to be flexible in their schedule -Shares knowledge that they have obtained with others -Open to taking on new challenges -Can easily be interrupted or redirected to a new task, or site based on Swagelok's needs -Has useable ideas to help increase equipment reliability Teamwork -Creates strong morale and spirit within the team by encouraging others and making them feel valued and important -Facilitates Root Cause analysis effort for equipment reliability -Facilitate Shift Start up and departmental meetings -Promotes group reputation in a positive manner -Effectively coordinates resources to achieve ZCD Communication -Communicates well with all different levels in the organization (shop floor, office, engineering, supervisors, managers, directors, lean leaders, etc.) -Promotes own ideas and information with others -Drill-down to root cause in all work order solutions -Communicate through appropriate escalation channels when required -Is a voice for Quality and will take time to explain theories and philosophies -Receives input from others Accountability -Drives team goals and results -Takes ownership of the actions and results of the team as a whole -Coordinate, communicate, and execute in the absence of supervision -Control emotions and reactions according to the situation and the audience -Provides accurate and detailed documentation including the use of SIS -Provides feedback to Supervision and guidance for other specialists in training **Working Conditions and/or Physical Requirements** : -Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. -Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. -May be required to pass pre-employment and annual Vision Acuity tests -Must be able to lift Kegs and Boxes on a regular basis between 25 - 35 pounds and occasionally between 35 - 50 pounds. Considerable standing, stooping and bending is required. Swagelok is proud to be an Equal Opportunity and Affirmative Action Employer. Applicants are selected without regard to race, ethnicity, creed, color, religion, sex (including pregnancy), age, national origin or ancestry, disability, genetic information, veteran/military status, sexual orientation, gender identity, or other protected characteristic under federal, state or local law. Swagelok will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990 and the Americans with Disabilities Act Amendments Act of 2008. This job summary is intended to be brief and does not list all the duties for this position. Nothing in this should be construed as an express or implied contract of employment. Swagelok is an at-will employer, which means that either party is free to terminate the employment relationship at any time, without any advanced notice, for any reason or no reason. Swagelok provides a comprehensive package of valuable benefits called Total Rewards focused on health and wellness, compensation, retirement planning, and supplemental rewards. To apply: 1. Click 'Apply Now' to the role of interest, create an account if needed, and upload your resume. 2. If the role requires it, complete an assessment. 3. Those that match our qualifications will be contacted to schedule a phone interview. Congratulations on taking the first step to **B** e Connected. **B** e Valued. **B** e You. _Swagelok is proud to be an Equal Opportunity and Affirmative Action Employer. Applicants are selected without regard to race, ethnicity, creed, color, religion, sex (including pregnancy), age, national origin or ancestry, disability, genetic information, veteran/military status, sexual orientation, gender identity, or other protected characteristic under federal, state or local law _ _Swagelok will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990,the Americans with Disabilities Act Amendments Act of 2008, and Ohio state law. _ _This job summary is intended to be brief and does not list all the duties for this position. Nothing in this job description should be construed as an express or implied contract of employment. Swagelok is an at-will employer, which means that either party is free to terminate the employment relationship at any time, without any advanced notice, for any reason or no reason. _

Job Description CNC Machine Operator 1st Shift $19-25/hour based on experience This is an excellent opportunity to grow with a company where advancement opportunities are possible right in Lake County, Ohio Summary: Precision components and assemblies using CNC turning, milling, multi-axis mill turning and other processes. Responsibilities: Perform minor tool offsets. Must be able to load material. Must be able to perform inspections. Must be able to maintain the machine. Capable of process troubleshooting is a plus. Must be quality oriented. Qualifications: 1 year as a CNC Machine Operator and/or relevant experience. Must be able to lift max of 30 lbs. repeatedly throughout day on a daily basis. Please Note: As part of our typical recruiting process, from time to time, we may contact you regarding positions that we feel are a good fit for you via SMS text message. Message and data rates may apply, depending on your mobile phone service plan. At any time, you can opt-out completely by replying STOP. By applying to this position, you are giving consent to this.

About Us: Our company, Closet Factory, is the custom storage solution authority serving Northeast Ohio's need for custom space organization throughout the home. We design, sell, build and install custom cabinetry, including closets, home offices, garages, wall beds, pantries, bookshelves and more. Our parent Company has been in business for over 40 years with locations throughout the country. Closet Factory-Cleveland has been owned and operated by the same principle owner for over 26 years . We have experienced substantial growth and as a result are searching for additional members to add to our close-knit team of employees to manufacture and install our cabinetry. Role and Responsibilities: Primary responsibility for this position is the programming, operation and maintenance of our new nested-base feed-through CNC Router. This CNC Router is a key piece of machinery in Closet Factory's production of custom cabinetry along with a fully automated Edgebander, Sliding Table Saw and several purpose-specific work areas. The CNC Operator will operate, maintain and use software to produce quality components for our cabinetry. Our woodworking facility produces all of the wood components to complete our cabinet product line using the 32-millimeter system. The woodworkers in our factory produce each job and check it for accuracy and quality. Job Benefits: Full-time, permanent positions Base pay starts at $ 20-$22/ hr. based on experience and skills. Medical, Sick Days and vacation Plans Year round work Specific requirements: Three to Five years of Nested Base CNC operation experience required Carpentry or woodworking experience a Plus. Strong mechanical aptitude Experience reading design plans, cut lists, CAD Drawings preferred. Ability to communicate effectively with team members and clients Agreement that client satisfaction is the company's and your top priority A Valid Drivers license and your own reliable transportation to work We recognize people as our most valuable asset and will train you to excel at your position and grow within the Company. A future with Closet Factory has never been brighter. Job Type: Full Time Starting Pay: $20 to $22/hr.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: + Health & wellness benefits starting on day 1 of employment + Paid parental leave + 401K eligibility + Tuition reimbursement + Employee Assistance Program eligibility / Health Advocate + Paid vacation and paid holidays Job Description The Coating Operator is assigned to work on a coating line and may work in one or more workstations including the face unwind, liner unwind, die, main console/winder, quality lab and backup team leader. Individuals in this role may be proficient on more than one coating asset in a given location. Responsibilities may include leading machine set ups and changeovers, problem-solving, coordinating PM's, and making decisions on machine adjustments. This role is on a continuous operations schedule with hours from 6:45 AM to 7:00 PM. Must be willing to work overtime. All interested individuals are encouraged to apply for this position. Those currently in the same department (Coating, Finishing, Shipping, etc.) at the hiring location will receive first consideration. They will be reviewed in accordance with the US Hourly Job Bid Policy and evaluated via our shift alignment process. Eligible and qualified applicants outside of the department will be given consideration and invited to interview for the position if there are no selected candidates via the shift alignment process. Further details regarding the job bid policy can be found in ad.a (**************************************************************************************************************************** Url=%2Fkb\_view.do%3Fsys\_kb\_id%3D6ca1c50f478382d07b3393ca216d4325) . Please discuss this opportunity with your manager prior to completing an application. Our typical recruiting process takes 2-4 weeks, depending on the current hiring volume and number of applicants. Primary Job Duties and Responsibilities: Activities and duties may vary depending upon site specific needs. Essential functions may include, but are not limited to: + Willing to lead the team and act as a backup Team Leader when Team Leader is absent. + Flexible to work alternate schedules or overtime for training purposes and to provide coverage for the Team Leader during vacations or other absences. + Works effectively with team and management to create a professional and positive work environment. Effectively communicates to team and management. + Ensures compliance with all environmental, health and safety procedures, policies, & practices. + Monitors and adjusts process conditions in order to manufacture a quality product in a safe and efficient manner according to required specifications. + Surface any malfunctions or abnormalities on equipment. + Assist Team Leader in maintaining production records, equipment logs, and product performance documents. + Willing to work on special projects or assignments. + Facilitate employee training and provide training recommendations to the production Team Leader and Manager. + Demonstrates compliance with current quality standard requirements. Works with team to follow Standard Operating Conditions, job specifications, and other related instructions. + Participates in group problem-solving teams and other continuous improvement activities. Supports ELS initiatives to improve manufacturing performance of work cell. + Collaborates with cross-functional teams to manufacture new products. + Identifies and resolves / escalates safety issues. Makes recommendations for safety improvements. + Accountable for performing daily production maintenance according to established guidelines. + Works with maintenance department to minimize unplanned down-time and get machine back up and running. + Other tasks as assigned Qualifications + High school diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience required. + Previous manufacturing experience preferred + Must be able to follow written and oral instruction. + Must regard safety as a core value; must serve as role model for other employees and encourage adherence to safety practices, policies and procedures. + Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand root cause, then communicate / educate team in a timely manner. + Must be able to actively contribute in a team based environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. + Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. + Must have demonstrated a record of flexibility and dependability in order to support production and customer focus. + Must be able and willing to work overtime, including short-notice requests. + Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled

Job Description The Sanding and Robot Operator - 3rd Shift position sets up, operates and maintains multiple robotic sanding cells as trained and instructed to meet or exceed defined production targets. ESSENTIAL DUTIES AND RESPONSIBILITIES (other duties as assigned) Operates multiple robotic sanding cells with the loading and unloading of helmets to maximize robot time sanding while also ensuring quality. Identify helmet models to be sanded and correctly set the machine fixturing to ensure quality sanding. Load and unload helmets from the fixturing proplerly. Organize and maintain the machine fixturing so that they can be easily found as needed. Operate the computer controls of each cell to select the proper program for the paint color being sanded. Load the robot sanding tool as needed with the proper sand paper grit per the program running. Change the interface pads and backup pads on each cell running as needed to maintain quality sanding. Identify and communicate issues quickly to the GrayMatter Team using the Hot Line and the Team Viewer communication tool. Communicate issues immediately to Team Leader and Supervisor. Observes all safety rules and regulations. Exercises care and good judgment at all times to prevent accidents and injuries. Adheres to all company policies, procedures, rules, and BRG Code of Conduct. Practices good housekeeping by keeping work cells clean and organized. Performs other duties and tasks as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to satisfactorily perform each essential duty and responsibility listed above. The job requirements and physical demands listed below are representative of the required knowledge, skill, and/or ability to perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities. JOB REQUIREMENTS Authorized to work in the U.S. SKILLS Ability to perform simple mathematical calculations. Ability to effectively relate with others and cooperate as a team member. Ability to perform essential functions and responsibilities of the job with some supervision. Must be flexible. Careful attention to detail. Ability to communicate effectively in one-on-one and small group situations within the organization as well as to GrayMatter Robotics using the HotLine and Team Viewer app. Ability to rely on judgment for personal safety regarding work. Ability to write simple correspondence to communicate issues between shifts. PHYSICAL DEMANDS Must be able to lift and/or move up to 50 pounds at a time. Sufficient hand, eye, arm, and finger dexterity to load and unload the robotic sanding fixtures. Must wear safety glasses and hearing protection in designated areas. Prolonged periods of standing and/or walking while also performing repetitive tasks. Prolonged periods of bending/twisting throughout a work shift.

We are seeking a hands-on CNC Mill Operator to join our advanced manufacturing team. This role provides a unique opportunity for direct international training in Italy, where you will work alongside our global partners to learn CNC robotic production processes and apply that expertise within our U.S. facility. This will be a full time 1st Shift position in Mentor, Ohio. Location - Mentor, Ohio Shift - 1st Shift Pay: Starting $25- 28/hr based on Experience Responsibilities Operate and monitor CNC-driven robotic systems to support daily production Safely and efficiently operate a forklift to move materials and equipment Assist with industrial robot operation, including basic programming tasks (no coding experience required) Contribute to spot welding, wire bending, and related fabrication processes as needed Qualifications Valid driver's license; forklift certification preferred Basic understanding of industrial or CNC robotics Previous experience in spot welding or wire bending preferred Ability to travel internationally and adapt to varying shift schedules Growth-oriented mindset with a strong interest in long-term career development in advanced manufacturing If you are interested in this full time 1st shift CNC Mill Operator position in Mentor, Ohio please apply now!

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Full-time Description Mach3 Machine, located in Cuyahoga Falls, OH, a 100% employee-owned organization, specializes in large fabrication and precision machining. We offer great benefits, a supportive team environment, and the opportunity to build a fulfilling career in a culture-driven company. #ZV Position Summary: We are seeking a skilled CNC Machinist to machine parts with precision and efficiency. This role involves selecting appropriate sequences of operations, executing optimal setups, and ensuring all parts meet blueprint dimensions and tolerances. KEY JOB RESPONSIBILITIES: Machine Operations: Set up and operate a Horizontal Boring mill or lathe machines to produce precision parts and components (Fanuc-controlled CNC HBM). Maintenance: Perform daily start-up, clean-up, and routine preventative maintenance on equipment. Measurement Tools: Regularly use manual tools, including dial calipers, dial indicators, and OD/ID micrometers, to verify dimensions. Material Handling: Identify and label materials for fabrication or further machining. Blueprint reading: Interpret and work from engineering drawings, blueprints, and technical specifications. Physical: Load and unload raw materials and finished workpieces in and out of the CNC machine. Flexibility: Operate additional machines as needed to meet production demand. Requirements Experience: 3-5 years of machining experience required. Machine operation: Ability to set up and operate machines according to job specifications and production requirements. Technical Skills: G& M code programming knowledge is a plus (training available). Work Ethic: Must demonstrate an employee-owner mindset, with strong decision-making and accountability. Additional Skills: Forklift or overhead crane experience preferred, and familiarity with alloy steel machining required. Blueprint Proficiency: Ability to read and interpret blueprints and BOMs. Detail-Oriented: High accuracy, attention to detail, and a commitment to workplace safety. Core Values: Do Right - Always! Customer-Centric Teamwork Get it Done! - Well and Timely Drama-Free Work Environment Be Smart, Grow & Learn, Stay Smart Physical Requirements: Ability to stand for extended periods and occasionally lift up to 50 pounds. Physical activities include pushing, pulling, bending, stooping, and reaching as necessary. Steel-toe boots and safety glasses are required. Perks and Benefits: We offer competitive salaries, plus a competitive benefits package, which includes: Retirement Plan 100% company-funded (ESOP) 401(k) with match Health Insurance - choice of plans depending on your needs Dental Vision 6 Paid Holidays $2 shift differential for 2nd shift Quarterly bonuses PTO (Please note our two shutdown periods, where employees utilize PTO or may opt for voluntary work opportunities if available) Referral program Tuition Reimbursement Why Join Us? At Mach3, your work matters, and so does your voice. As an employee-owner, you'll be part of a team that values hard work, innovation, and integrity. Apply today and join a team where your skills and contributions are recognized and rewarded! Salary Description $20-$45/hr based on experience

Mach3 Machine, located in Cuyahoga Falls, OH, a 100% employee-owned organization, specializes in large fabrication and precision machining. We offer great benefits, a supportive team environment, and the opportunity to build a fulfilling career in a culture-driven company.#ZR Position Summary: We are seeking a skilled CNC Mill Machinist to machine parts with precision and efficiency. This role involves selecting appropriate sequences of operations, executing optimal setups, and ensuring all parts meet blueprint dimensions and tolerances. KEY JOB RESPONSIBILITIES: Machine Operations: Set up and operate a Horizontal Boring mill or lathe machines to produce precision parts and components (Fanuc-controlled CNC HBM). Maintenance: Perform daily start-up, clean-up, and routine preventative maintenance on equipment. Measurement Tools: Regularly use manual tools, including dial calipers, dial indicators, and OD/ID micrometers, to verify dimensions. Material Handling: Identify and label materials for fabrication or further machining. Blueprint reading: Interpret and work from engineering drawings, blueprints, and technical specifications. Physical: Load and unload raw materials and finished workpieces in and out of the CNC machine. Flexibility: Operate additional machines as needed to meet production demand. Requirements Experience: 3-5 years of machining experience required. Machine operation: Ability to set up and operate machines according to job specifications and production requirements. Technical Skills: G& M code programming knowledge is a plus (training available). Work Ethic: Must demonstrate an employee-owner mindset, with strong decision-making and accountability. Additional Skills: Forklift or overhead crane experience preferred, and familiarity with alloy steel machining required. Blueprint Proficiency: Ability to read and interpret blueprints and BOMs. Detail-Oriented: High accuracy, attention to detail, and a commitment to workplace safety. Core Values: Do Right - Always! Customer-Centric Teamwork Get it Done! - Well and Timely Drama-Free Work Environment Be Smart, Grow & Learn, Stay Smart Physical Requirements: Ability to stand for extended periods and occasionally lift up to 50 pounds. Physical activities include pushing, pulling, bending, stooping, and reaching as necessary. Steel-toe boots and safety glasses are required. Perks and Benefits: We offer competitive salaries, plus a competitive benefits package, which includes: Retirement Plan 100% company-funded (ESOP) 401(k) with match Health Insurance - choice of plans depending on your needs Dental Vision 6 Paid Holidays $2 shift differential for 2nd shift Quarterly bonuses PTO (Please note our two shutdown periods, where employees utilize PTO or may opt for voluntary work opportunities if available) Referral program Tuition Reimbursement Why Join Us? At Mach3, your work matters, and so does your voice. As an employee-owner, you'll be part of a team that values hard work, innovation, and integrity. Apply today and join a team where your skills and contributions are recognized and rewarded! Salary Description $20-$45/hr based on experience

TempToFT Job Title: CNC Mill/Lathe Operator/Set-up Pay Rate: $20-24 PER HOUR BOE Hours: Monday through Thursday 6AM-430PM Occasional OT on Friday 6am-430pm Job Description: Job Summary: Set up & operate CNC Mill/Lathe to change, load/unload & produce parts Responsibilities: • Monitor & maintain equipment such as lubricant & cooling levels • Apply basic concepts of Alegra & Geometry • Avidly interpret Blueprints Physical Requirements: LIFTING: ENVIRONMENT: 1-20LBS STANDING, PUSHING PULLING Work Environment: o PACE OF ENVIRONMENT: MED o LEVEL OF SUPERVISION: HIGH o LEVEL OF INTERACTION WITH OTHERS: MED o ABILITY TO HANDLE MULTIPLE TASKS: MED o LEVEL OF EXPERIENCE REQUIRED: HIGH o TRAINING PROVIDED: LIMITED Location: Akron Dress Code: STEEL TOED SHOE/BOOTS CNC Mill & Lathe Operations. $20- $24 per hour BOE Essential Duties and Responsibilities include, but are not limited to, the following: • Operate programmed machinery to change, load/unload, and produce parts to specified design. • Monitor the feed and speed of machines during the machining process. • Inspect items as instructed and provide feedback to management to ensure any quality defects can be avoided in the future. • Inspect parts per blueprint as instructed. • Ability to apply concepts of basic algebra and geometry. • Monitor and maintain lubrication and coolant levels / points. • Clean up job site after work and return equipment and tools. • Supply own basic hand and measuring tools. Requirements / Competencies Expected: • Ability to read blueprints • Must demonstrate job responsibility consistency • Requires the ability to read and follow detailed written and/or verbal instructions • Demonstrate eagerness to learn different part/machine setups and operations. • Must demonstrate regular attendance 20.00 Qualifications High School Minimum 2 YEARS

Job Description Seeking a **CNC Machinist **to operate and set up CNC mills, lathes, and Swiss-type machines. This role produces high-quality machined components while following blueprints and technical instructions. Ideal candidates have 1 year of CNC experience and are eager to grow their skills in a hands-on manufacturing environment. Key Responsibilities- Read and interpret blueprints, sketches, and operation sheets to determine setup and machining requirements. Prepare tooling, fixtures, and workpieces; align and secure components for machining. Set machine controls for spindle positioning, cutting depth, speed, feed, and coolant flow. Monitor CNC machines and make adjustments to maintain quality or correct errors. Measure parts to ensure conformance with specifications. Perform routine cleaning and basic machine maintenance. Follow all safety protocols and wear required personal protective equipment. Skills and Qualifications- High school diploma or equivalent. At least 1 year of experience operating CNC mills or lathes. Ability to read and interpret blueprints and technical drawings. Basic math skills (fractions, decimals, measurements). Competence in CNC machine setup and operation. Ability to lift up to 50 lbs and work in a physically active environment. Reliable, self-motivated, and effective in a team environment. Clear verbal and written communication skills. Work Environment- Temperature-controlled manufacturing environment. Fast-paced, hands-on production setting. Use of personal protective equipment required; adherence to safety protocols. Technical Proficiency- GD&T (Geometric Dimensioning & Tolerancing) CNC mills (3-5 axis) CNC lathes (2-4 axis) CNC Swiss-type lathes Blueprint reading and machine setup Salary info: $35 - $35 / hr

Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribution equipment, and controls. Components range from the insulation used in transformers, motors and motor controls to precision parts for the aerospace, military, medical, renewable energy, and other demanding industries. Companies appreciate our ability to deliver metal fabrications, plastic fabrications, even complete subassemblies. But in most every case, CMI is actually delivering a custom solution to a complex engineering, design or materials challenge. In fact, CMI takes on projects that others won't. Few fabricators can match our unique blend of 50 years of experience, reputation for innovation, skill of our team, expertise of our engineers, adherence to quality certifications, and commitment to client success. The company is looking for a self motivated oriented individual that likes new challenges everyday. The position offers an individual to use their full skill set to advance the interests of the company. The position also offers full benefits including healthcare, dental, vision, life insurance, short term disability, 401k retirement and profit sharing plans. Edit, set up, and operate CNC equipmemt to produce product according to print specifications; programming capabilities a plus Troubleshoot programs including speeds, feeds and tooling Verify and document in process work orders Ensure quality product by using necessary measuring equipment including calipers, micrometers and pi tapes Basic maintenance on equipment Meet production deadlines by following manufacturing schedule and procedures Pay Range: $26-32/hr Requirements High school diploma/GED required (2YR Technical Education Preferred) Familiarity with Microsoft Office suite Advanced written and oral communication skills Blueprint Reading Good Organizational Skills US Citizenship Required

CNC Machinist (2nd Shift) | Cleveland Want to build large complex fabrications for submarines? That's one of the important things we do here at AT&F. If so, learn more about our team, how we work together, and the amazing fabrications we build at ********************** You are part of the AT&F Family starting on the first day. Medical benefits start on your first day. Who Are We? We Build, Protect, Energize, and Move the World through Metal Fabrication Founded in 1940, AT&F is a major producer of components for construction cranes, mining equipment, defense projects, structural sections for shipbuilding, power industry related components, and specialty stainless steel fabrications. AT&F is comprised of specialized Business Units (BUs): Heavy Fabricating, Precision Processing, AT&F Advanced Metals, and AT&F Wisconsin. Our multiple facilities have over 600,000 square feet of manufacturing space and over 200 Team Members. AT&F is in its fourth generation of family leadership. While the values of the organization are like those found in family-run firms, AT&F is also forward thinking, sophisticated, and professional. Who We Want on Our Team? We offer competitive salaries plus profit sharing and a full range of benefits for our Team Members, including health, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, AT&F clothing program, a Wellness Program, Military Veterans Resource Group, ESL Classes, and opportunity for career growth. However, our Team is motivated by more. Teamwork, Purposeful Work, and Getting Better at our Craft. Our growth is continuing with current and new customers. Do you want to be a part of a Fabricating Team that is preforming challenging, purposeful work? Our team lives by our Core Values: Work Hard, Do What You Say You'll Do, Take Care of Each Other, Quietly Lead, Invest, and Run To It. Ask us about these Core Values to find out if this will be the place you are looking for. The Goals and Challenges of this Role: Review engineering prints, select and acquire appropriate tooling. Ability to run large machining centers either VTL or HBM Edit and maintain CNC programs Perform machine setup and operation as needed. Implement continuous improvement. Inspection and measurement of machined components. Train and develop less experienced AT&F machinists. What You Should Bring to this Role: A minimum of three (5) years experience in component CNC machining. Dealt with lower run quantities per part. Ability to interpret blueprint/drawing specifications and GD&T. Applied experience with various inspection methods (hand gages, CMM, etc.) Proven ability to develop the machining skills of others. Proficiency with AutoCAD and Fanuc, Siemens, G code programming. Overhead crane operation and rigging experience Basic computer skills for email, web-based communications. Pay Range: $25.00 - $32.00 per hour. This range reflects the minimum and maximum for the role. Starting pay depends on your skills, experience, and ability to perform the job.

Title: CNC Machinist Shift: 1st Shift (7am-3:30pm, M-F) Salary: $35-$40/hr CNC Machinist Role: Produces machined parts through maintaining quality and safety standards; keeping records; maintaining equipment and supplies. In this role you will operate under flexible parameters'. The primary goal of this position is to achieve excellence in all facets of the position. Providing the highest quality product safely, effectively, and efficiently decreases accidents and errors and increase profits. Machinist Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; trimming heads. Loads feed mechanism by lifting stock into position. Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Work hours as posted, being on time and at the place of work at the start of the shift Move product in and out of the department by use of a forklift About You: High School Diploma or equivalent Mechanical aptitude 2+ years of CNC Machine Operation experience Lift up to 50lb boxes Ability to perform at high levels in a fast pace constantly changing environment Ability to work as part of a team Ability to work overtime hours Reading blueprints Proficient on a Tow Motor Skilled with measurement instruments: Micrometers, Calipers, Height Gages, Optical Comparators Ability to see small parts, burrs, radius, and handheld tools If you are driven and a team player, we would like to hear from you. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate/ occasionally loud. #INDRBR

Job Details Ramco Specialties Inc - Hudson, OH Full Time High School $35.00 - $40.00 Hourly DayDescription Objective The CNC Machine Operator produces machined parts through maintaining quality and safety standards; keeping records; maintaining equipment and supplies. This position operates under flexible parameters. The primary goal of this position is to achieve excellence in all facets of the position. Providing the highest quality product safely, effectively, and efficiently decreases accidents and errors and increase profits. Essential Functions Ability to follows rules, instructions, guidelines and all other duties as assigned Team player with ability to interact with all departments Responsible for running CNC mill and lathe machines, associate will be required to document the progress using data collection sheets and Microsoft Navision software Complete machine tool adjustments, after completed and documented training Responsible to use measuring equipment to track the quality of the products they are producing per the data collection sheets at intervals noted, expected to be producing a defect free product, with quality assurance assistance and guidance Operate common inspection and measurement tools such as calipers, micrometers, and gages, as well as other specialized inspection and measurement equipment, such as comparators, CMM, as applicable Lift 50 lbs. and use a pallet jack, operate small hand tools for deburring and cutting or as directed Work hours as posted, being on time and at the place of work at the start of the shift Move product in and out of the department by use of a forklift Qualifications Required Education and Experience High School Diploma or equivalent Mechanical aptitude 2+ years of CNC Machine Operation experience Lift up to 50lb boxes Ability to perform at high levels in a fast pace constantly changing environment Ability to work as part of a team Ability to work overtime hours Preferred Skills Reading blueprints Proficient on a Tow Motor Skilled with measurement instruments: Micrometers, Calipers, Height Gages, Optical Comparators Ability to see small parts, burrs, radius, and handheld tools Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those that must be met by an employee while performing the essential duties of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Noise level is usually moderate to loud. Occasionally exposed to loud noise, humidity, rainy/stormy, hot and cold weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles. Occasionally work in high precarious places. This job description is not intended to be a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of Ramco Specialties, Inc. Since no job description can detail all the duties and responsibilities that may be from time to time in the performance of a job, duties and responsibilities that may be inherent in a job, reasonably for its performance, or due to the changing nature of the job shall also be considered part of the job holder's responsibility.

CNC MACHINIST Position Type: Temp to Hire or Direct HirePosition Hours: 1st Shift, 7:00am - 3:30pm, Monday-FridayPosition Location: Cleveland, OhioPosition Salary: $25.00 - $30.00 Primary Purpose of the Job:Set-up and use manual and CNC (Computer Numerically Controlled) machines to produce (machine, form and/or assemble) plastic, acrylic and steel parts for use in client's Corrosion Test Chamber and Metal Finishing Equipment product lines. Essential Duties: Review orders, drawings and prints for accuracy and applicability. Assess and maintain inventory needs. Be able to download programs, perform test operations, and produce parts to order/drawing/specification. Set-up and use lathe(s) to produce parts to order/drawing/specification. Set-up and use milling machine(s) to produce parts to rder/drawing/specification. Set-up and use drill press(es) to produce parts to order/drawing/specification. Set-up and use vertical and horizontal cut-off saw(s) to produce parts to order/drawing/specification. Set-up and use planer(s) to produce parts to order/drawing/specification. CNC programming - be able to perform programming/edits at the machine in G-code (HAAS). Fabricate plastic and steel parts to specification. Assemble parts to final product. Perform routine machine maintenance. Visualize, design, and create fixtures and tooling for manufacturing efficiency. Other Duties: Assist with equipment assembly as necessary. Keep all work areas clean and organized. Document time & material when producing parts. Follow all safety policies. Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service. Required Skills/Experience: Ability to read, visualize and follow drawings, blue prints, and schematics. Knowledge of G-code is a plus. Knowledge SheetCAM/CAM software is a plus. Ability to learn job-related material through oral instruction and observation. This learning takes place mainly in an on the-job training setting. Ability to accurately read measuring instruments (i.e. calipers, tapes, gauges, etc.) Ability to use basic hand and/or power tools. Ability to prioritize multiple projects. Strong work ethic - ability to report on time for all scheduled workdays/shifts. Required Education/Experience: Basic reading, writing, and arithmetic are required. A high school diploma or equivalent is required. Additional technical training would be a plus. Five years of manufacturing experience. Working Conditions: Working conditions are normal for a manufacturing environment. Safety-toe footwear and eye protection are required when working in the shop. Machine and tool operation may require the use of hearing protectors. Certain duties may require the use of a mask/respirator. Position requires the ability to: Remain in a standing position for extended periods of time. Bend or stoop repeatedly or continually over time. Lift objects up to 50 pounds.

Growing Eastlake Ohio Aerospace/Defense & Motion Control Company providing precision machining, contract manufacturing has an immediate opening for a CNC Lathe/Mill Machinist. Sign on bonus available! Competitive pay and benefits! Job Description Job Summary: The CNC Lathe/Mills Setup/Operator will work with our team of engineers and machinist to help produce a variety of products for industries including Aerospace, Defense, process control and other applications. The ideal candidate will play a key role in the organization assisting with manufacturing of products in an environment that is fast paced and dynamic. Essential Duties and Responsibilities: Sets up and operates numerical control machine to cut, shape or form metal work pieces to specifications Review setup sheet and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece. Attaches fixture to machine bed and positions and secures work piece in fixture according to set up instructions using clamps, bolts, hand tools, power tools and measuring instruments such a rule and calipers. Assembles cutting tools n tool holders and positions tool holders in machine spindles as specified, using hand tools, or inserts cutting tools in specified machine magazines. Loads control media, such as disk, tape, or punch card, in machine control console or enter commands to retrieve preprogrammed machine instructions from data base. Manipulates controls and enters commands to index cutting tool to specified set point and to start machine. Observes and listens to machine operations to detect malfunctions, such as worn or damaged cutting tools. Changes cutting tools and location of work piece during machining process as specified in set p instructions. Measures work piece for conformance to specifications, using measuring instruments such as micrometers, dial indicators and gauges Notifies supervisor of discrepancies. May adjust machine feed and speed and change cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions May machine materials other than metal such as composites, plastic and rubber. May instruct other workers May use statistical process control techniques Other duties as assigned Performance Metrics and Expectations: On-time delivery Production rates Quality Essential Traits: Excellent problem solving skills, highly analytical, uses fact-based problem solving methods Competitive; takes ownership and demonstrates a bias for action. Responsible, disciplined, and accountable, leads by example… attention to detail. Is a champion of lean methods. Respect for others, high integrity, operates effectively in a team environment Ability to manage multiple priorities effectively with strong organizational skills Growth oriented, looks for the best practice, continuous improvement mentality Innovative and creative… applies new approaches to solving problems. Strong interpersonal/team building skills including the ability to communicate with all levels of the organization and participate on multi-functional teams. Qualifications Education and Experience Qualifications: High school diploma or GED Ability to read / interpret blueprints Experience using various mechanical inspection tools Understanding of CNC Programing and G&M Codes Knowledge of CNC equipment Knowledgeable with Word and Excel Additional Information Physical Demands: The physical demands described here are represented of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, reach with arms and hands and use hands and fingers to handle or feel objects, tools or controls and speak and hear. The employee is occasionally required to stoop, kneel and crouch. The employee must occasionally lift and/or move up to 25 lbs. Specific vision abilities that may be required by this job include close vision, distance vision and color vision.

Department CNC Department Employment Type Full Time Location Slabe Machine Products Workplace type Onsite Compensation $25.00 - $30.00 / hour Key Responsibilities Skills Knowledge and Expertise Benefits About The Slabe Machine Products The word technology is defined as the practical application of knowledge. Slabe Machines secret to delivering on-time, low-cost, and complex components is to fill a shop with a wide variety of technologically advanced machine tools and ensure that they are efficiently put to use by a team that embraces a wide variety of lean techniques. Adhering to this strategy for the past 80 years has resulted in us becoming world class manufacturer able to offer everything from design and prototyping to full scale production, all at low costs.

We are seeking a skilled CNC Swiss Lathe Machinist to join our team. You will be responsible for setting up and operating machines to produce precision parts and components. This is a full-time position on 2nd shift with competitive pay, benefits and shift differential. Responsibilities: * Set up and operate CNC Swiss machines * Read and interpret blueprints and related technical data to determine tooling requirements, setup procedures and machining methods and sequences. * First Article Inspection and inspection of parts during production to maintain quality throughout the production run * Must have the ability to maintain close tolerances (within .001) tolerance * Knowledge to review and interpret "G" and "M" Code * Prepares and pre-sets all tools needed for machining operations * Must have an understanding of machine tool accuracies, fixture offsets, and tool offsets * Knowledge of cutting tool feeds, speeds and tool life * Work closely with ME/CNC Programmers on new job prove-out, troubleshooting and improving processes * Work with ME department to optimize processes and identify insourcing and reprocessing opportunities * Self-starter and self-motivated person, ability to work with minimal supervision * Ability to work overtime regularly * Ability to work well in team environment * Perform other duties as assigned Qualifications: * 3 years of experience setting up and operating Swiss Lathe or equivalent machine * Experience with Mitsubishi controls and Citizen Machines * Ability to use Comparator, micrometers, air gages, calipers, profilometer, etc. * Strong knowledge of GD&T * Ability to setup machines including editing speeds, feeds, tool and fixture offsets * Experience in programming CNC machines is a plus Education: * High school diploma or equivalency Benefits: * Competitive pay based on experience * Health insurance coverage options * Retirement plan options * Paid time off * Holiday pay This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization. An equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Work Location: In person