Numerical control operator jobs in Lancaster, PA

Job Description***PeopleShare Lancaster, PA is HIRING IMMEDIATELY for an Experienced CNC Machinists at one of the BEST companies in the area!***Apply now or contact Misty:Call or text ************** Job Details for CNC Operator Machinist: Schedule: 1st Shift Mon - Fri 6:30am-3pm 2nd Shift Mon-Th 3pm-1:30am 3rd Shift Mon-Th 8pm-6:30am Weekend Shift Fri-Sun 6:30am-7pm All shifts train on 1st for minimum 6-8 weeks Starting Pay Rate: $21 - $35 or more per hour depending on shift and experience Weekly Pay via Direct Deposit Eligibility for strong Benefits: Medical Dental Vision Retirement PTO Job Responsibilities & Description for CNC Operator Machinist: Maintain, operate, and perform setup and changeover of CNC Mills, CNC Lathes, CNC Grinders, and other computer controlled machinery Perform mechanical and digital setup and changeover CNC programming involvement - install, test run, basic editing of CNC programs, and some basic program writing Perform advanced mechanical, setup, quality, and process troubleshooting Conduct root-case analysis and recommend corrective actions Read and apply blueprints and schematics Refine small metal parts to tolerances of +/- .0005" Use calipers, micrometers, and precision measuring tools Follow and update detailed production checklists Manually lift up to 50lbs occasionally Job Requirements for CNC Operator Machinist: For safety reasons - ability to communicate in English REQUIRED Must be able to work 2nd shift or Weekend shift - 1st and 3rd are not currently available 2+ years of experience in skilled CNC Machining including setup, programming, and grinding REQUIRED Experience working with tolerances equal to or less than +/-0.0005" REQUIRED Experience with manufacturing blueprints, schematics, or custom drawings REQUIRED Must have excellent work history: 2+ consecutive years in a recent role, with near-perfect attendance record Must have reliable transportation Understanding of CNC programming basics (ability to edit and test-run CNC programs) strongly preferred High School diploma or GED required Excellent communication skills and positive attitude If you feel you have MOST of the above qualifications, please apply! We want to speak with you! PeopleShare is the leading Staffing Agency in the region and has temporary to hire and permanent jobs in the central Pennsylvania (PA) area - Harrisburg, Camp Hill, Lemoyne, York, Lancaster, Carlisle, Chambersburg, Middletown, Leola, Shippensburg, Ephrata and Mechanicsburg, as well as northern Maryland (MD) - Hagerstown, Maugansville, Williamsport, Boonsboro, Smithsburg, and Hancock. We have openings for receptionist, data entry, customer service, collections, office managers, call center, administrative assistant, accounts payable clerk, accounts receivable clerk, file clerk, warehouse, warehouse shipping, warehouse receiving, warehouse associate, warehouse team member, warehouse machine operator, warehouse machinist, assembly, production, pickers, packers, forklift, machine operators, machine operator, machine operator assistant, machine operator associate, machine operator, machine operator, machine operator, CNC machine operators, CNC machine programmers, CNC Machinists, CNC Machine Operators, Grinder Operators, CNC Grinder Operators, and maintenance mechanics. PeopleShare provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, PeopleShare complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.IND15

Company: Acco Department: Manufacturing Title: CNC Lathe Operator - YORK, PA Reports to: Machine Shop Supervisor Level/Grade: Union Type of Position: Full Time FLSA Status: Non-Exempt Shift: First Company / Product Acco Material Handling Solutions (“Acco”) specializes in the manufacturing of material handling equipment, including hoists, cranes, carts and lifters. Its products are used primarily in industrial manufacturing and distribution environments, including aerospace, water treatment, heavy manufacturing, agriculture, mining, automotive, and logistics. Operating from three manufacturing facilities in the US, Acco provides ready to ship stock products or fully engineered custom devices. Products are sold through distributors, as well as to large direct customers. Job Summary CNC Lathe Operator will setup, machine, and measure parts to close tolerance to support wire rope hoist and component manufacturing. Principal Duties and Responsibilities Work with supervisor on setting daily work flow/priorities Read and interpret drawings Setup, machine, and measure to specification Maintain highest quality standards - accept no defects, make no defects, pass no defects Communicate any challenges related to Safety, Quality, Delivery, Inventory, and Productivity (SQDIP) to supervisor Maintain a clean and organized work space Innovate and collaborate with peers in your work area - find ways to improve SQDIP Volunteer for overtime as needed Pay / Location Starting rate - $21.00 per hour with progression to $23.00 per hour. Pending experience level determines starting hourly rate. Location - 76 Acco Dr York, PA Job Specifications (Work Experience, Skills, Abilities, etc.) Ability to read and interpret machining drawings Experience in CNC Lathe machine setup and operation Manual and NC machine experience a plus Experience with and ability to use calipers, micrometers and other precision measuring tools Coordinate Measuring Machine (CMM) experience a plus High sense of urgency and strong work ethic Demonstrated ability and passion for high quality output Works well both independently and in a team environment Education Requirements: High school diploma or equivalent, technical/vocational school a plus Physical Demands/Environmental Conditions: Typical manufacturing conditions. Must be able to lift 35 - 50 lbs. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. #Acco

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** The CNC Mill Machinist I is responsible for machining parts utilizing milling equipment while relying on support from others in the machine shop department. Level I machinists will keep parts running and within specifications with consultation from others, such as higher-level machinists. They will be dependent upon others while performing duties including, machine tool setup, process prove out, first article inspection, and operation that are required until the job is complete. This position relies primarily on the experience and judgment of others to plan and accomplish their daily goals. **Variety of Shifts Available** + Standard hours for 1st shift: Monday- Thursday 5:00 a.m. - 3:30 p.m. + Standard hours for 2nd shift: Monday- Thursday 3:30 p.m. - 2:00 a.m. *10% shift differential + Standard hours for weekend shift: Friday- Sunday 5:00 a.m. - 5:00 p.m. *25% shift differential **Responsibilities** + Set up products on assigned milling machine tools while dependent on others in the department for support + Operate assigned milling machine tools within the department based upon predetermined input provided by CNC programmers and/or higher-level machinists + Read and interpret blueprints and diagrams, as well as job travelers for direction + Load and unload milling machine tools in a timely fashion + Allocate 80% or more hours to contracted jobs each shift + Identify, locate, and build all required tooling for production + Create and edit CNC offsets for both fixtures and tooling + Perform tool breakage detection, as well as recognize tool wear symptoms + Perform post processing during CNC cycle time + Deliver finished parts to designated areas + Complete assignments and production sequences based upon the CNC List(s) to meet production goals and schedules, as well as input from the machine shop management team + Conduct quality control by inspection of materials, products, and equipment to proactively detect defects or malfunctions + Follow basic machine tool maintenance practices + Adhere to all company safety policies and procedures, as well as sanitation regulations + Manage priorities as they change throughout a shift + Accurately capture all labor hours and material in Epicor + Adhere to schedules, production goals, and budget + Perform other duties as assigned, including those outside department as necessary **Requirements: Education, Experience & Skills** + High School Diploma, GED, or trade school graduate, or 1 to 3 years of practical milling experience + Experience using MS Office (Word, Excel, Outlook) a plus + Effective oral and written communication skills + Ability to handle changing priorities in a fast-paced environment + Flexibility with work schedule, including some weekends, holidays, and different shifts as required; ability to work OT (more than 40 hours) in any given week as needed **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk, bend, climb, push, pull, twist, squat, and kneel each day. Specific requirements are: + Must be able to stand for extended periods of time + Must be able to lift or move 20-30 lbs. + Must be able to carry 20-30 lbs. + Must be able to pull or push 20-30 lbs. Work conditions of the role are: + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and loud noises + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes hard hat, safety glasses, reflective vest, ear plugs, steel toed shoes, and other PPE as required by the department \#LI-JH1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

CNC Lead Machinist Shift: 7:00 AM-3:30 PM, Monday-Friday Salary: $34.00-$38.00/HR Are you a skilled CNC Machinist with a passion for innovation, precision, and leadership? Mitsubishi Chemical Advanced Materials is seeking an experienced professional to lead our Machining Center of Excellence (MCE) - a key role connecting the design and execution phases for manufacturing products. You'll drive operational excellence, mentor machinists, and help shape the future of advanced machining. Key Responsibilities: Leadership & Planning: Organize daily machining activities, prioritize workloads, and ensure efficient workflow and labor utilization. Decision-Making: Use data and experience to make timely, informed decisions that support production and quality goals. Communication & Collaboration: Coordinate effectively with engineering, production, and quality teams to achieve seamless project execution. Continuous Improvement: Identify and implement process enhancements to reduce waste, optimize cycle times, and improve machining efficiency. Safety & Compliance: Promote a culture of safety, following all company policies and supporting our "zero incidents" goal. Programming & Operation: Program CNC machines for new parts with a focus on high-precision and complex components. Inspection & Quality Control: Perform first-article and in-process inspections using manual gauges; make real-time program edits to ensure quality compliance. Workflow Optimization: Monitor customer (internal and external) orders to ensure on-time delivery and alignment with business objectives. Systems & Documentation: Utilize ERP software to record job details, time, and production data for transparency and efficiency. Team Support: Lead by example with integrity, respect, collaboration, and persistence; support teammates in maintaining 5S and quality standards. Other Duties: Perform additional machining or leadership tasks as assigned. Qualifications: Experience: Minimum 5 years of CNC machining experience, including program writing, setup, and operation. Technical Proficiency: Skilled in SolidWorks, Mastercam, and 5-axis programming and operation. Hands-On Expertise: Proven ability to set up and operate 3-, 4-, and 5-axis CNC machines. Inspection Skills: Strong understanding of drawings, tolerances, and manual inspection techniques. Leadership Experience: Prior experience as a lead machinist or team leader preferred. Physical Requirements: Ability to lift up to 50 lbs. and stand for extended periods. Pay Transparency: The salary range for this position is $34-$38. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting. Competitive Benefits Sign On Bonus Benefits begin on DAY 1! Employee Assistance Programs Curated Self-Paced Learning & Development Programs for all Employees $1,000 Sign on Bonus Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status Mitsubishi Chemical Advanced Materials Inc. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please email [email protected]. We will make a determination on your request for reasonable accommodation on a case-by-case basis. The law requires Mitsubishi Chemical Advanced Materials Inc. to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights Mitsubishi Chemical Advanced Materials Inc. will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. Please see the Pay Transparency Nondiscrimination Provision for more information As a Federal Contractor, Mitsubishi Chemical Advanced Materials Inc. is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify.

Job Description CNC Machinist 3rd Shift Pay: $25-35/hr. (Depending on experience level and/or Journeyman papers) Shift: Sunday-Thursday (11pm to 7am); voluntary OT may be available Qualifications: Candidate must have a high school diploma or GED Qualified applicants under a Machinist position will possess PA State Approved Journeyman Machinist or Journeyman Tool & Die Makers Papers Must be able to pass a working physical Knowledge of G+M codes a plus Ability to interpret Blueprints Responsibilities: Maintain a Safe work environment Perform setups on CNC machines (Lathes, Horizontal Mills, Vertical Mills, and 5 axis Mills) safely and productively Layout components to verify stock for machinability Machine parts to drawing specifications utilizing CNC machine tools such as Vertical Turning Mills and Horizontal Boring Mills Edit CNC programs, as necessary Calculate dimensions and tolerances using math for machining, ensure that components meet the drawing specifications utilizing a variety of inspection tools (micrometers, Vernier calipers) Benefits: Safe, clean working environment Vacation after 90 days Medical benefit package within first 30 days or less Eligible for 10 paid holidays immediately Paid lunch and break Shift differential for off-shifts of $2.50/hour Position is subject to a drug screening and/or background check prior to starting

Company DescriptionSteeped in a tradition of hydropower, American Hydro is the leading supplier and installer of large equipment for the hydroelectric industry. Currently, American Hydro is looking for a CNC Machinist to join the family at our York, PA facility. We're a tight-knit group that takes great pride in what we produce. If you are a detail-oriented, hardworking team member who is looking for a place to call home, we invite you to apply for this opening. Job DescriptionThe CNC machinist is responsible for rough and finish machining of production ports. NC programs and controller use. Work piece and machine set-up. Machinists are responsible to make sure their machines are working at full capacity, well-maintained and perform period checks on output. The Machinist must look at the product to ensure that it is ready for the next step in the production process. Key Responsibilities: Fully proficient in blueprint reading and understanding of geometric tolerancing Able to make complex component set ups on VBM's Able to write and edit programs for VBM's Able to make complex components set ups on HBM's Keep Supervisor informed of problems regarding work piece, schedule, safety, etc. as they arise Able to write and edit programs for HBM's Cleans up sweepings of machine tool operation scrap and collects in scrap/trash bins Able to set up feeds, speeds and judge cutter/insert condition to optimize machining operation for meeting surface finish and productivity operate overhead cranes and forklift trucks QualificationsEducation and/or Experience: High school diploma or general education degree (GED) and four years of related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Compensation range: $26-31 hr. based on experience/$2 hr. shift differential Additional InformationThe benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

CNC Machinist Work Hours: 3:00 PM to 1:30 AM, Monday through Thursday Competitive Compensation + 12.5% Shift Premium Make the Right Connection-Build Your Career with Dixon! Bearon Manufacturing, an affiliate of The Dixon Group is seeking a skilled CNC Machinist to join our dedicated team in Landisville, PA! In this hands-on role, you'll be responsible for setting up, operating, and maintaining CNC machinery to produce high-quality parts to exact specifications. If you have a strong mechanical background, shop training in machining and metal properties, and enjoy taking ownership of your work, this is a great opportunity to advance your career in a supportive and innovative environment. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: * Set up, operate, and fine-tune CNC machines to manufacture precision components (metal + plastic) * Run multi-axis programs for milling, drilling, threading, reaming, and profiling * Interpret blueprints and work instructions with accuracy and attention to detail * Perform part inspections using precision measurement tools (micrometers, calipers, gauges) * Collaborate with other machinists and engineers to improve processes and efficiency * Maintain a clean, safe work environment with a focus on quality and consistency What We're Looking For: * High School Diploma or equivalent required * 5+ years of CNC machining and setup experience * Solid background in metal manufacturing * Comfortable reading blueprints and using calipers, micrometers, and other QC tools * Good with shop math and basic CNC programming edits * Reliable, team-oriented, and always looking to improve * Able to lift 50 lbs and stand for extended periods of time What We Offer: * Medical, dental, and vision insurance for you and your family * Competitive salary * Bonus programs * 401K retirement plan * Training opportunities * Tuition reimbursement * Paid vacation, PTO, and holidays * Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Please contact us at ************** or ***************** if you need help to participate fully in the application process.

Local manufacturing company is seeking a CNC Machinist for our sheet metal manufacturing operation in Topton, PA. A strong family-owned manufacturing operation with over 60 years of tradition in the Topton, PA area is searching for a skilled CNC Machinist to play a key part in leading the company into the future. At the core, the company stands for excellence in its product, its customer reputation, and strong employee engagement. Every day is tackled with the drive to solve all issues in a collective environment and a drive to push yourself to always have a learning attitude. Our employees are appreciated, trained, and treated as part of our family in the clean, state-of-the-art facility that truly values safety, technology, and a great working environment. All of this is evidenced by the average tenure of our employees, at 10 to 20 years. If you have a background and proven track record in… Then this job might be for you…. Using milling machines, drill presses, lathes, and other machining equipment (manual and CNC- CNC-controlled) Interpret printed part drawings and 3-D part models Understanding ANSI/ISO dimensioning and symbols, including geometric tolerancing Machining parts using verbal instructions and CAM software Using standard machine shop hand tools and measuring devices like 0-1” micrometers, scales, wrenches, and more Previous experience with setting up and running Doosan Milling Center We are looking for 1 to 3 years of solid CNC Programming experience. A background in manufacturing and or sheet metal is a plus. Must be willing to work on the shop floor. If you have a 2-year CNC Technical degree or specific CNC Programming/Machining experience, we want to talk to you. Additional items you can bring to the table: Solid Work Ethic and a Collaborative Mindset A strong attention to detail Good communication skills (written and verbal) are required A positive team-player attitude Ability to multitask and respond to changing requirements Ability to work independently and as a team Light-duty lifting and other manual labor We can offer: Competitive Compensation (range will vary based on experience) Medical, dental, vision, and life Paid vacation time Paid holiday time 401(k) plan, including matching contributions Weekly pay with Direct Deposit on Thursdays Opportunities for Training, Development, and Growth And last but not least-great co-workers who enjoy working together, having fun, and supporting their community.

Join a team delivering top quality custom precision products in a climate-controlled environment. We offer a 4-day work week, competitive salary & benefits, including opportunity to earn up to three raises in the first 12 months, Health Insurance and HSA, 401K, quarterly team performance bonuses & more. We are a small yet growing manufacturing company with a reputation for high quality, high precision products and services. We aspire to greatness for our company and the critical needs government and commercial clients we serve. We seek trained production and administrative professionals who desire a challenging, fulfilling career and can help us thrive. Are you someone who: -possesses curiosity, runs toward challenges and has a persistent desire to grow and learn? -sees no task as too big or small? -can manage the day-to-day responsibilities while also contributing to team efforts to improve our systems and processes? -is a positive contributor in building an excellent culture? -has a high standard of excellence yet can roll up your sleeves and do what's needed to get us there? Enjoy a 4-day workweek and positive environment! Great benefits. We are searching for a skilled CNC Machinist who desires a challenging, fulfilling career and can help this York company become the national leader in hydraulics and fluid power components. Assembly and painting experience a plus. Are you: --interested in producing high-precision, custom parts? --motivated to provide critical components to our military? --Willing to learn and grow your skills? We are looking for operators for CNC turning and machining centers who are able to perform setups, read & adjust programs, and work efficiently to produce high quality parts. 3+ years of CNC experience is preferred. Specific requirements include: Operates CNC turning or machining centers and has the ability to operate more than one machine at a time, conditions permitting Reads and understands programs and makes adjustments as needed to match drawing specifications Monitors quality during manufacturing and makes corrections Inspects manufactured parts to ensure they meet specified tolerances Sets up each part Works efficiently without sacrificing safety or quality If you fit the bill, we invite you to apply today. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance

Provide programming support while setting up & operating Mazak CNC Lathes to fabricate metallic and nonmetallic parts. Key Objectives Set up and operate Mazak CNC Lathes - Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steels, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc. Manufacture components within the allotted time estimates provided on the job travelers Make process recommendations for improved efficiency and work to optimize processes, programs and cutting tools. Ensure customer satisfaction with product and service. Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics. Essential Job Functions Program, setup, and operate Mazak Multi-axis Turning Centers with minimal supervision. Utilize as many machine tool resources as possible at all times, which may require employees to run multiple machines simultaneously. Have proficient knowledge of G&M codes with the ability to perform manual program edits as required to effectively complete job work scope. Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerancing per ANSI Y-14.5 Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.0005". Where required, document inspection results on supplied Inspection Documentation Sheets and/or Inspection Prints. Keep equipment (machine, gauging, tooling, etc.) clean while maintaining a clean and orderly work area. Follow preventative maintenance procedures on equipment as prescribed by the supervisor and report operating difficulties of equipment. Document daily activities to assure performance in accordance with job standards. Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required. Willing to work overtime when needed to satisfy customer requirements. Perform duties in accordance with Company Policies including, but not limited to attendance, confidentially, safety and work practices, and substance abuse. Employee may be required to operate forklifts and have the ability to safely rig and handle products up to 4 tons. The employee may be required to follow other job-related instructions and to perform other job related tasks as required, subject to applicable state and federal law Additional Qualifications The following skills and qualifications are a plus but are not required for this position. Master-Cam CNC programming experience Experienced working in ISO-9001 or AS9100 quality environment

OverviewWe are seeking a skilled CNC Machinist to join our dynamic team in York, PA. In this role, you will play a crucial part in our manufacturing process, utilizing your expertise to produce high-quality components with precision and efficiency. If you have a passion for machining and a keen eye for detail, we want to hear from you! ResponsibilitiesSet up and operate CNC machines to produce parts according to specifications.Read and interpret blueprints, technical drawings, and CAD files.Monitor machine operations to ensure quality and consistency of output.Perform routine maintenance and troubleshooting on CNC equipment.Collaborate with team members to optimize production processes and workflows.Maintain a clean and safe work environment in compliance with company policies.Document production data and report any discrepancies or issues to management. QualificationsHigh school diploma or equivalent; technical degree or certification in machining preferred.Proven experience as a CNC Machinist or similar role.Proficient in reading and interpreting technical documents and blueprints.Strong understanding of CNC programming and machine setup.Ability to use precision measuring tools and equipment.Excellent problem-solving skills and attention to detail.Strong communication skills and ability to work collaboratively in a team environment. You should be proficient in: GD&T Equipment Troubleshooting CNC Tooling Troubleshooting Skills CNC Programming G-Code M-Code Machine Setups for Production Runs Machines & technologies you'll use: CNC Mill (3-4 axis VMC) CNC Lathe (2-4 axis) CNC Mill (5+ axis VMC) CNC Lathe (5+ axis)

CNC Machinist 🕒 Work Hours: 3:00 PM to 1:30 AM, Monday through Thursday 💲 Competitive Compensation + 12.5% Shift Premium Make the Right Connection-Build Your Career with Dixon! Bearon Manufacturing, an affiliate of The Dixon Group is seeking a skilled CNC Machinist to join our dedicated team in Landisville, PA! In this hands-on role, you'll be responsible for setting up, operating, and maintaining CNC machinery to produce high-quality parts to exact specifications. If you have a strong mechanical background, shop training in machining and metal properties, and enjoy taking ownership of your work, this is a great opportunity to advance your career in a supportive and innovative environment. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. 🔧 What You'll Do: Set up, operate, and fine-tune CNC machines to manufacture precision components (metal + plastic) Run multi-axis programs for milling, drilling, threading, reaming, and profiling Interpret blueprints and work instructions with accuracy and attention to detail Perform part inspections using precision measurement tools (micrometers, calipers, gauges) Collaborate with other machinists and engineers to improve processes and efficiency Maintain a clean, safe work environment with a focus on quality and consistency 🎯 What We're Looking For: High School Diploma or equivalent required 5+ years of CNC machining and setup experience Solid background in metal manufacturing Comfortable reading blueprints and using calipers, micrometers, and other QC tools Good with shop math and basic CNC programming edits Reliable, team-oriented, and always looking to improve Able to lift 50 lbs and stand for extended periods of time 🌟 What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Please contact us at ************** or ***************** if you need help to participate fully in the application process.

Corporate Profile: SyBridge Technologies was established in 2019 by Crestview Partners to create a global technology leader that provides value-added design and manufacturing solutions across multiple industries. SyBridge is the combination of 15 acquisitions made to combine different products, services, and technologies into a singular technology-enabled solution. SyBridge is based in Southfield, Michigan and has 20 locations throughout North America, Europe, and Asia. For more information, please visit ***************** About Crestview Partners: Founded in 2004, Crestview is a value-oriented private equity firm focused on the middle market. The firm is based in New York and manages funds with approximately $10 billion of aggregate capital commitments. The firm is led by a group of partners who have complementary experience and backgrounds in private equity, finance, operations and management. Crestview has senior investment professionals focused on sourcing and managing investments in each of the specialty areas of the firm: industrials, media, and financial services. For more information, please visit us at ****************** Job Function: In support of the Mission, Vision and Values of SyBridge Technologies Group of Companies, the Lead Mold Maker is responsible for running jobs start to finish. Reporting to the General Manager the Lead Mold Maker works to ensure accuracy and consistency to help the team meets or exceeds all goals and objectives required from this department. Essential Duties & Responsibilities: Customer Service Attend Concept Meetings of the assigned Job Study and Understand the Design Layout the Production Plan (Routers) with input from the Manufacturing Engineer Answering questions relating to quality, delivery and technical questions relating to the job Fill out or direct the completion of Inspection paperwork Understand Project “Deliveries “report scheduling issues to General Manager Study Job Ticket and confirm all job requirements Make sure that all prints reflect the correct part quantities, spares and (safety extra's) Print Control and Redlines Deliver work to the next work cell/machine Oversee Machining Methods time allotments Operation Leader for Grinding Assembly Training and Motivation Record and report all errors and Out-Of-Tolerance deviations to Management Final Fit and Assembly / Final Mold Completion Inspection Debug of Mold after Sampling Turn in prints and all completed forms at job end Post Completion Job review with Manufacturing Engineer and General Manger Cleanliness of work area Education & Experience: Certification or College Degree, or High School diploma and Equivalent Experience in Mold Manufacturing environment Eight (8) years of related experience building, leading and assembly of high cavitation, multi-action molds Ability to perform under pressure and work independently Ability to prioritize tasks and meet deadlines as required Ability to ensure quality standards are met Strong attention to detail is required Strong leadership, interpersonal, communication and relationship building skills Proficient in time management and communication skills What We Offer: Competitive salary and comprehensive benefits package Sign on bonus: $2500 at 90 days of employment, $2500 at 9 months of employment Professional development opportunities to enhance your skills Our commitment to your personal and professional growth Membership & Professional Fee Program Education reimbursement to support your ongoing learning Physical Demands & Working Conditions Requires walking, and on your feet for most of the day. Lifting as required up to 50 pounds on occasion. Specific vision abilities required by this job include color vision. May need to climb stairs/steps periodically. May need to reach above shoulder heights and below the waist. Noise levels and temperatures may vary due to areas accessed. There is some exposure to dust, fumes, and chemicals. Protective gear such as ear plugs, masks, gloves, safety glasses, etc. may be required in specific areas or duties. SyBridge Technologies is an Equal Opportunity Employer and prohibits Discrimination and Harassment of any kind. We are committed to the attitude of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at SyBridge are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, sex, sexual orientation, gender identity, National origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. SyBridge encourages applicants of all ages. This position will require prolonged computer use and sitting for periods of time. In accordance with Americans with Disabilities Act (ADA), SyBridge Technologies will provide accommodations when requested by the employee. When the employee becomes aware of any disabilities that would affect them from performing their duties, they will advise SyBridge Technologies if accommodation is required.

Job Description CNC Machinist ???? Work Hours: 3:00 PM to 1:30 AM, Monday through Thursday ???? Competitive Compensation + 12.5% Shift Premium Make the Right Connection-Build Your Career with Dixon! Bearon Manufacturing, an affiliate of The Dixon Group is seeking a skilled CNC Machinist to join our dedicated team in Landisville, PA! In this hands-on role, you'll be responsible for setting up, operating, and maintaining CNC machinery to produce high-quality parts to exact specifications. If you have a strong mechanical background, shop training in machining and metal properties, and enjoy taking ownership of your work, this is a great opportunity to advance your career in a supportive and innovative environment. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. ???? What You'll Do: Set up, operate, and fine-tune CNC machines to manufacture precision components (metal + plastic) Run multi-axis programs for milling, drilling, threading, reaming, and profiling Interpret blueprints and work instructions with accuracy and attention to detail Perform part inspections using precision measurement tools (micrometers, calipers, gauges) Collaborate with other machinists and engineers to improve processes and efficiency Maintain a clean, safe work environment with a focus on quality and consistency ???? What We're Looking For: High School Diploma or equivalent required 5+ years of CNC machining and setup experience Solid background in metal manufacturing Comfortable reading blueprints and using calipers, micrometers, and other QC tools Good with shop math and basic CNC programming edits Reliable, team-oriented, and always looking to improve Able to lift 50 lbs and stand for extended periods of time ???? What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Please contact us at ************** or ***************** if you need help to participate fully in the application process.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** The CNC Mill Machinist I is responsible for machining parts utilizing milling equipment while relying on support from others in the machine shop department. Level I machinists will keep parts running and within specifications with consultation from others, such as higher-level machinists. They will be dependent upon others while performing duties including, machine tool setup, process prove out, first article inspection, and operation that are required until the job is complete. This position relies primarily on the experience and judgment of others to plan and accomplish their daily goals. **Variety of Shifts Available** + Standard hours for 1st shift: Monday- Thursday 5:00 a.m. - 3:30 p.m. + Standard hours for 2nd shift: Monday- Thursday 3:30 p.m. - 2:00 a.m. *10% shift differential + Standard hours for weekend shift: Friday- Sunday 5:00 a.m. - 5:00 p.m. *25% shift differential **Responsibilities** + Set up products on assigned milling machine tools while dependent on others in the department for support + Operate assigned milling machine tools within the department based upon predetermined input provided by CNC programmers and/or higher-level machinists + Read and interpret blueprints and diagrams, as well as job travelers for direction + Load and unload milling machine tools in a timely fashion + Allocate 80% or more hours to contracted jobs each shift + Identify, locate, and build all required tooling for production + Create and edit CNC offsets for both fixtures and tooling + Perform tool breakage detection, as well as recognize tool wear symptoms + Perform post processing during CNC cycle time + Deliver finished parts to designated areas + Complete assignments and production sequences based upon the CNC List(s) to meet production goals and schedules, as well as input from the machine shop management team + Conduct quality control by inspection of materials, products, and equipment to proactively detect defects or malfunctions + Follow basic machine tool maintenance practices + Adhere to all company safety policies and procedures, as well as sanitation regulations + Manage priorities as they change throughout a shift + Accurately capture all labor hours and material in Epicor + Adhere to schedules, production goals, and budget + Perform other duties as assigned, including those outside department as necessary **Requirements: Education, Experience & Skills** + High School Diploma, GED, or trade school graduate, or 1 to 3 years of practical milling experience + Experience using MS Office (Word, Excel, Outlook) a plus + Effective oral and written communication skills + Ability to handle changing priorities in a fast-paced environment + Flexibility with work schedule, including some weekends, holidays, and different shifts as required; ability to work OT (more than 40 hours) in any given week as needed **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk, bend, climb, push, pull, twist, squat, and kneel each day. Specific requirements are: + Must be able to stand for extended periods of time + Must be able to lift or move 20-30 lbs. + Must be able to carry 20-30 lbs. + Must be able to pull or push 20-30 lbs. Work conditions of the role are: + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and loud noises + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes hard hat, safety glasses, reflective vest, ear plugs, steel toed shoes, and other PPE as required by the department \#LI-JH1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

CNC Advanced Machinist Shift: 7:00 AM-3:30 PM, Monday-Friday Salary: $30.00-$36.00/HR Are you passionate about precision and innovation? Join our dynamic team as a CNC Advanced Machinist, where you'll bring complex parts to life. This role is perfect for someone who thrives in a fast-paced environment, embraces challenges, and takes pride in crafting high-quality components with minimal margin for error. You'll play a key role in driving efficient production, maintaining a safe and organized workspace, and pushing the boundaries of advanced manufacturing. What you will do: Create & Optimize: Program CNC machines for new parts, focusing high-precision and complex components. Lead Projects: Identify opportunities for continuous improvement to enhance machining operations, reduce waste, and optimize cycle times. Collaborate: Work closely with supervisors and team members to ensure a timely and successful job completion. Inspect & Improve: Perform first article and in-process inspections using manual gauges; make real-time program edits to resolve issues. Document & Track: Use ERP software to log job details and time, ensuring transparency and efficiency. Maintain Excellence: Support safety, 5S, and quality standards while keeping your workspace clean and organized. What you will bring: Experience: Minimum 5 years in CNC machining, blueprint reading, manual inspection, and program writing/revision. Technical Skills: Proficiency in SolidWorks, Mastercam, and 5-axis programming and operation, a plus. Hands-On Ability: Skilled in setup and operation of 3-, 4-, and 5-axis machines. Physical Readiness: Able to lift up to 50 lbs. and stand for extended periods. Leadership Potential: Experience as a machining lead is a strong plus. Pay Transparency The salary range for this position is $30-$36. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting. Competitive Benefits Sign On Bonus Benefits begin on DAY 1! Employee Assistance Programs Curated Self-Paced Learning & Development Programs for all Employees $1,000 Sign On Bonus Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status Mitsubishi Chemical Advanced Materials Inc. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please email [email protected]. We will make a determination on your request for reasonable accommodation on a case-by-case basis. The law requires Mitsubishi Chemical Advanced Materials Inc. to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights Mitsubishi Chemical Advanced Materials Inc. will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. Please see the Pay Transparency Nondiscrimination Provision for more information As a Federal Contractor, Mitsubishi Chemical Advanced Materials Inc. is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify.

The CNC Machinist will set-up and operate a variety of CNC machines. Requirements: Proficient with the operation of a CNC machine Ability to complete set-ups on various types of CNC machines Familiar with standard machine shop metrology equipment and be proficient with reading gages. Able to make machine adjustments as necessary based on tool wear and gage feedback. Required to follow safety protocols. Expected to complete inspection documentation as required by process control plan. Able to perform preventative maintenance and 5S guidelines Familiar with G&M code Working in a team environment and required to communicate effectively with other team members. Required to work 10-12 hours shifts on their feet. Familiar with metric/standard conversion. Willing to train other machine operators as needed. Benefits: Health / Dental / Vision Insurance Annual ESOP (retirement) contribution (3%-15% of W2 wages) PTO Employee Assistance Program Health Savings Account Annual Profit Sharing Training and Development Tuition Reimbursement Referral Program Multiple Shift Options

Setup and operate CNC Vertical Turret Lathe to fabricate metallic and nonmetallic parts by performing the following duties. Key Objectives Setup and operate VTLs - Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc. Manufacture components within the allotted time estimates provided on job travelers. Ensure customer satisfaction with products and service. Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools. Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics. Essential Job Functions Setup, and operate VTLs with minimal supervision. Must have Proficient Knowledge of G Code with the ability to perform manual CNC program edits as required to complete job work scope. Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5. Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002" over 55" diameter. Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints. Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area. Follow preventative maintenance procedures on equipment as prescribed by the supervisor and report operating difficulties of equipment. Document daily activities to assure performance in accordance with job standards. Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required. Willing to work overtime when needed to satisfy customer requirements. Employee may be required to operate forklifts and have the ability to safely rig and handle products up to 4 tons. Must be able to stand, twist, bend, and repeatedly lift up to 50 lbs. Must be able to use hands and vision to complete coordinated actions. Work practices to be in accordance with Company Policies including, but not limited to attendance, confidentiality, safety and substance abuse. The employee may be required to follow other job-related instructions and to perform other job related tasks as required, subject to applicable state and federal law. Additional Qualifications The following skills and qualifications are a plus but are not required for this position. Mastercam Programming experience. Ability to setup & operate Horizontal Boring Mills, and/or Horizontal/Vertical Machine Centers. Experience working in an ISO-9001 or AS9100 Quality Environment.

Setup & operate CNC Mills/Lathes to fabricate metallic and nonmetallic parts. Key Objectives Setup and operate CNC Mills/Lathes - Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc. Manufacture components within the allotted time estimates provided on job travelers. Ensure customer satisfaction with products and service. Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools. Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics. Essential Job Functions Setup, and operate various CNC equipment with minimal supervision. Must have Proficient Knowledge of a variety of controls (Mazak, Fanuc, etc) with the ability to perform manual CNC program edits as required to complete job work scope. Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5. Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002" over 55" diameter. Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints. Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area. Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment. Document daily activities to assure performance in accordance with job standards. Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required. Willing to work overtime when needed to satisfy customer requirements. Employee may be required to operate forklifts and have the ability to safely rig and handle product up to 2 tons. Must be able to stand, twist, bend, and repeatedly lift up to 50 lbs. Must be able to use hands and vision to complete coordinated actions. Work practices to be in accordance with Company Policies including, but not limited to attendance, confidentiality, safety and substance abuse. The employee may be required to follow other job-related instructions and to perform other job related tasks as required, subject to applicable state and federal law. Additional Qualifications The following skills and qualifications are a plus but are not required for this position. Mastercam Programming experience. Experience working in an ISO-9001 or AS9100 Quality Environment.