Numerical control operator jobs in Lansing, MI - 87 jobs

AIR-WAY GLOBAL MANUFACTURING : CNC OPERATOR Desired Expertise: Mechanically inclined, preferably machining experience. Minimum Education: High School Diploma or G.E.D., and successful completion of Air-Way training program. Desired Experience: 3 years of CNC set-up experience, preferably with Fanuc and/or Siemens controls. Location: Olivet, MI / Hamilton, IN Employment Type: Full-Time, Non-Exempt Reports to: Production Supervisor / Assistant Supervisor Supervisory Responsibilities: • This position has no supervisory responsibilities. Job Description: Position Summary: The CNC Operator is responsible for running required production with good parts that will pass inspection on any machine within the classification. Essential duties and responsibilities include the following. Other duties may be assigned. • Practice safe work procedures. • Follow Air-Way written work instructions and procedures relative to the position. • Follow Company 5-S procedures and guidelines and maintain clean and organized work station. • Read prints. • Take measurements. • Getting materials for production and maintain tool inventories. • Grind tools as necessary. • Use proper tooling to operate and set up CNC machines on the line. • Operate multiple machines in the discretion of the Company. • Perform set-ups within acceptable times as established by management. • Perform daily servicing of machines. • Troubleshoot basic machine, tooling and program problems. • Maintain proper coolant levels. • Chart or input data into Micronite at required levels. • Track and end required reporting information as directed by management and published work instructions and procedures. • Chamfer parts as necessary. • Train other employees as necessary. • Meet standard production rates established by management. • Understand Company's Quality and Environmental policies. • Employees in all classifications are encouraged to submit ideas on how to improve processes and procedures. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional requirements: • Must exhibit basic math and reading skills. • Must be able to multi-task. • Must be able to comprehend work instructions. • Must be able to work well under time constraints and pressure to meet deadlines. • Must be able to work in a team environment. • Must be able to follow direction from supervision. • Personal protective equipment is required, including safety-toed shoes or boots. • Must be able to troubleshoot. Physical Demands: • The majority of time performing this job is spent standing at a machine for long periods. • The employee is frequently required to walk throughout the shop to other machines. • The employee must have 20-20 or corrected vision to operate machinery, visually inspect parts for non-conformances, and detect correct fitting configurations. • The employee is required to use hands and fingers to handle or feel, and reach with hands and arms. • The employee must be able to frequently lift up to 40 pounds, and infrequently lift up to 50 pounds. • The employee must be able to bend, crouch, push, pull, crouch and turn. Working Conditions: • This position works in factory environment that can be oily, noisy, and warm. Travel Requirements: • This position has no travel requirements. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed. Employee Printed Name Supervisor Signature / Date Employee Signature / Date

Paxton Countertops is the leading countertop manufacturer located in Lansing, Michigan. With over 40 years' experience in the countertop manufacturing process, we strive to be the best at what we do, resulting in satisfied customers each and every time. Are you seeking employment with a fun, growing, family-owned company where you can continue to learn and grow? Are you looking for a career not just a job? We are seeking a Fabricator/CNC Operator. Duties of this position vary from hand fabrication of several different kinds of Natural Stone, Engineered Stone, Solid Surface Material and Laminate to CNC Operation/Maintenance with the opportunity to progress to CNC programming and other technical positions. Paid Weekly, Rare weekends, advancement opportunity! $29,000 - $43,000 per year Job Description Roles and Responsibilities: Fabricate Natural Stone, Solid surface, Quartz, Dekton and Laminate Operate CNC machines Read shop drawings Add and subtract accurately Measure and cut within 1/32 tolerance Work to proper safety standards Use hand tools, Grinders, Saws, Routers, Sanders Attach and install top mount and undermount sinks Drill holes for fixtures as needed Load/unload slabs of stone and finished countertops with proper safety equipment Operate overhead crane, manzelli crane, forklift Qualifications Physical Requirements: Ability to handle heavy materials - lifting, carrying, pulling, and pushing 100+ pounds Must be able to stand for 8+ hours a day Qualifications and Education Requirements: High School Diploma or equivalent Prior experience in fabricating countertops or experience using similar tools, measuring, and cutting accurately preferred CNC or machining experience preferred CNC operating experience preferred CNC programming experience preferred CAD experience preferred Must be a team player with the ability to focus on client fulfillment Self-directed worker capable of staying on task with minimal supervision Ability to work in a fast-paced environment Good communication skills If an offer of employment is extended, it will be conditional upon successful clearance of a background check, and drug screen for illegal substances. Additional Information All your information will be kept confidential according to EEO guidelines.

A CNC Operator, or a Machining Tool Operator, sets up and operates metal-cutting machinery to build tools and parts of various machinery. Their duties include studying blueprints and creating the design, cutting metal and manipulating it to build the project, and performing regular maintenance on their machinery. CNC Operator Brighton, MI Role Overview: We are looking for skilled CNC Setup Technicians to set up, operate, and maintain CNC equipment used in the production processes. The ideal candidate will have a hands-on approach and extensive knowledge of CNC machinery lathes and mills. Key Responsibilities: Set up and adjust CNC machines for various production tasks. Perform troubleshooting and resolve mechanical and operational issues. Monitor machine performance to ensure high-quality parts. Collaborate with the programming team to implement and follow production schedules. Ensure a safe work environment and adhere to safety protocols. Qualifications Minimum of 2 years of experience as a CNC Setup Technician. Proficiency with CNC equipment, particularly Mazak and Doosan machines. Familiarity with Mazatrol controllers on lathes. Knowledge of production processes and the ability to read and interpret technical drawings. Ability to work effectively in a fast-paced manufacturing environment. Why is This a Great Opportunity Quick Growing Company with great benefits. OOJ - 32888

The Wood Shop Router Operator creates various wood and plastic components using a CNC router. The components are then delivered to the next person in the process. These components support several different areas throughout the plant, including furniture fabrication and the assembly line. Qualifications 1-2 years experience operating a CNC Router

Midwest Press & Automation LLC is a fast paced, rapidly growing company servicing the metal forming industry. We are seeking a motivated individual with prior CNC experience to join our team. Programming CNC Horizontal Boring Mill and Lathe using G-Code Set up parts using overhead cranes and forklifts Machine parts complete to provided blueprints Perform in-process inspection and record accurate sizes at part completion Maintain good housekeeping practices in the work area Skill & Experience Requirements: High School Education Self-Motivated Manual mill & lathe experience CNC horizontal boring mill experience Display mechanical aptitude Understanding of Fanuc G and M Codes Read & understand blue prints Basic math skills including trigonometry Benefits we offer: Wage range $23-$43 with shift premium Medical, dental and vision plans 401(k) with a generous company match Paid vacation & holidays

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

1. Analyze a variety of specifications from blueprints, sketches, models, or descriptions, and visualize product to be made. 2. Must have knowledge to lay out stock, as well as set up and operate machine tools and hand tools. 3. Fit and assemble components to make, maintain, and repair tools, jigs, fixtures, bushings, collars, gages, and mold patterns. 4. Compute dimensions, decide on machining to be done, plan layout and assembly operations. 5. Verify the dimensions, alignments, and clearances while using measuring instruments such as dial indicators, gage blocks, thickness gages, and micrometers. 6. Adapt to new methods, processes, material, and equipment. 7. Record data on employee time/job card. 8. Report work shortages to Manager/Supervisor. 9. Recommend production efficiency and quality improvements to supervisor. 10. Comply with safety regulations and ensure cleanliness in tool and die area to include all tools, benches, and machines. 11. Immediately report incidents and accidents in work area. 12. Participate in an environment and culture that promotes safety in the workplace. 13. Attends and contributes to department and Company meetings. 14. Develop constructive relationships with vendors, contractors, consultants and governmental agency representatives as necessary. 15. Other duties as assigned Requirements 1. We expect all team members to exhibit our guiding principles, all day, every day - Respect, Dedication, Integrity, Teamwork and Positivity. 2. High School diploma or equivalent required. 3. Ability to program CNC machines using G and M codes or through conversational programming. (SolidWorks, Mastercam, and Fanuc languages used on 3 axis) 4. Selection of proper tools to create geometry. 5. Proficiency in setting optimal speed and feeds for material type, as well as cutting tools selection. 6. Knowledge of internal combustion engines and related mechanical systems. 7. Possess strong analytical and problem solving skills. 8. A minimum of 2-3 years' experience in programming CNC, Mills, Lathes, EDM, Grinders and secondary machines or equivalent course work through a technical trade school, preferred. 9. Willingness to work various shifts and overtime as needed. 10. Fluent in English with comprehensive speaking, writing, spelling skills. 11. Position subject to indoor factory conditions; heated in winter and non-air conditioned in summer 12. Must be able to perform basic math. 13. Basic knowledge of MS Office including Word, Excel, and Outlook.

Job DescriptionDescription: Average Starting Pay Range $20.00 - $35.00, higher level machinists can earn more! Day Shift Monday - Friday 6:00 am to 4:30 pm 16% Night Shift Premium Available Monday - Thursday 4:15 pm - 4:45 am. 30% Weekend Shift Premium - Friday through Sunday 5:00 am to 5:30 pm PTO upon hire, Medical, Dental, and Vision Benefits are offered on the first day of the next month after hire, 401(K) after 6 months Overview: As a CNC Machinist for Keel Midwest, you will be responsible for operating CNC Machines in a job shop setting to manufacture complex, tightly tolerance components ranging from small to large from print and to exacting quality and delivery deadlines. On the job training is provided as needed. Job Functions: Performs advanced setup operations and adjusts machine tools to perform operations from provided programs. Adjusts and checks out programming. Operates CNC machine tools to perform complex series of progressive machining operations on a diverse line of work. Adjusts speeds and feeds during operation. Works from programming instructions, operational data, and machine setup instructions defining and coding tool arrangements, material clamping methods, machine calibrations, and console settings for operations such as bore, mill, drill, face, thread, and occasional profiling and contouring. Check parts for conformance to specifications. May run more than one unit simultaneously Physical Demands: Some heavy lifting, no more than 50 lbs without mechanical assistance. Bending, stooping, and twisting are normal motions during operation. Work Environment: Job shop manufacturing floor environment. As such, exposure to oil, dirt, debris, fumes moving machinery and equipment, and occasional high decibels are typical. Shop floor is climate controlled. PPE is required at all times. EEO STATEMENT KEEL is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected status. We believe in fostering a workplace that values diversity and promotes equity and respect for all. The job requirements are subject to change to reasonably accommodate qualified disabled individuals. Requirements: High School Diploma or GED is required. An Associates degree in Machine Tool preferred. Specific evidence of supervisory training. Two (2) to five (5) years of experience in related position in the machine tool industry. Job Shop or Prototype experience. Experience in machining for a very diverse industry base such as: Mining, Aviation, Defense, Rail, Shipbuilding, Heavy Equipment, Gas & Oil and Machine Building. Experience in machining large and complex work. Ability to work from blueprints, sketches, and written specifications. Knowledge of GD&T.

CNC Programmer/Machinist Department: Manufacturing Reports To: Lead CNC Machinist FLSA Status: Non-Exempt THE COMPANY Invio Automation is a leading provider of advanced automation solutions, serving high-growth markets including medical device and life sciences, renewable energy, mobility, logistics & fulfillment, and heavy industry. Our collaborative teams deliver mission-critical R&D pre-validation services that lay the foundation for full-scale automation systems-where precision, efficiency, and accuracy are essential to success. With six locations across North America and a global network of partners, Invio maintains a strong presence in key regions where local service and support matter. Invio's proven portfolio of Industry 4.0 technology includes Autonomous Guided Vehicles (AGVs) for heavyweight applications, turnkey assembly lines, welding automation, lift-assist tools for safety-critical operations, robotic cells, multi-station assembly systems, bonding and welding technologies, vision systems, and precision dispensing solutions such as high-viscosity pumps, impulse bag sealing, and needle bending. Working at Invio means making a direct impact on the future of American manufacturing. We are committed to improving the lives of those who partner with us by designing and integrating custom-engineered automation solutions that enhance safety, increase efficiency, and raise product quality for our customers. DESCRIPTION A CNC Programmer/Machinist works in our manufacturing department and must be able to produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine with G&M code; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Executes work to specification, schedule, and quality standards tied directly to customer requirements. Reads and interprets work orders, blueprints, engineering plans, GD&T, materials, and machining parameters. Performs inspection, documentation, and finishing to meet internal and external expectations. Supports production, project execution, and occasional customer-facing activities tied to equipment readiness, buyoffs, and service needs. ESSENTIAL DUTIES AND RESPONSIBILITIES Deliver work that meets specifications, schedules, and quality standards aligned to customer requirements. Program, set up, and operate CNC machines to produce parts that meet tolerance requirements. Load feed mechanisms and position material. Verify machine settings by measuring positions, first-run parts, and sample workpieces. Maintain part specifications by monitoring machining operations: drilling, grooving, cutting, turning, facing, knurling, thread chasing. Identify malfunctions, diagnose root causes, adjust controls, and replace or sharpen tooling. Adapt to changing work shifts or schedules to meet customer and project requirements. Follow project schedules and complete assigned tasks within expected timelines. Communicate progress and issues early to supervisors to avoid delays. Document all activities through production and quality logs; contribute to WIP tracking and reporting tools. Support cross-functional collaboration by providing accurate technical input when requested. Guide associates on proper task execution to maintain throughput and reduce rework. Maintain equipment by completing preventive maintenance and reporting repair needs. Maintain continuity across shifts by accurately documenting actions and irregularities. Follow all safety, quality, and ethical standards without exception. Demonstrate dependability, accountability, and consistent execution that supports Invio's mission. Maintain professionalism and respect in all interactions; contribute positively to team culture. Perform other duties as assigned. Other Skills and Abilities: Select the appropriate tools, machines, and materials to be used in preparation of machinery work Maintain industrial machines, applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures. Observe and listen to operating machines or equipment in order to diagnose machine malfunctions and to determine need for adjustments or repairs Check work pieces to ensure that they are properly lubricated and cooled. Operate equipment to verify operational efficiency. Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter. Working knowledge of manufacturing processes Strong interpersonal skills. Good verbal and written skills. Proven organizational skills. Ability to prioritize and work with limited supervision. Ability to explain how and why specific conclusions were reached. Ability to maintain confidentiality. Ability to work well under pressure and to remain flexible to changing schedules and demands Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to perform light physical activity. The employee must occasionally lift and/or move up to 30 pounds, anything over 30 pounds will require lift assistance. Specific vision abilities required by this job include close vision and depth perception. EDUCATION High School diploma or Associates degree from an accredited community college or vocational school Job related experience and/or training will be considered in lieu of post-secondary education INVIO AUTOMATION'S CORE VALUES We take pride in the reliability of our team and the difficult problems we solve for customers. We deliver real customer value that positively impacts the lives of those around us. We are dependable . Relationships and trust matter. Our ingenuity and desire to improve lives will complement our suite of solutions . We strive to demonstrate that our attention to detail does not start or end with the solutions we engineer and deliver. We believe exceptional service is better demonstrated than said.

Job DescriptionOverview Join our dynamic team in Battle Creek, MI, as a CNC Programmer! We are looking for a skilled professional who is passionate about precision and innovation in manufacturing. In this role, you will be responsible for programming CNC machines to produce high-quality parts that meet our clients' specifications. If you thrive in a collaborative environment and enjoy problem-solving, we want to hear from you! Responsibilities Develop and optimize CNC programs for various machining operations. Set up and operate CNC machines, ensuring they run smoothly and efficiently. Read and interpret technical drawings and specifications to create accurate programs. Conduct quality checks on finished products to ensure they meet required standards. Collaborate with engineers and production staff to troubleshoot and resolve machining issues. Maintain and update documentation related to CNC programming and machine operation. Participate in continuous improvement initiatives to enhance productivity and quality. Qualifications Proven experience as a CNC Programmer or similar role in a manufacturing environment. Strong understanding of CNC machinery and programming languages (e.g., G-code, M-code). Ability to read and interpret blueprints, technical drawings, and schematics. Familiarity with CAD/CAM software is a plus. Excellent problem-solving skills and attention to detail. Strong communication skills and ability to work well in a team. High school diploma or equivalent; relevant certifications are a plus. You should be proficient in: GD&T CNC Tooling Troubleshooting Skills CNC Programming CNC Machine Repair CNC Machine Installation Tape Measure Reading M-Code Machine Setups for Production Runs Manual Machining Skills Machines & technologies you'll use: CNC Mill (3-4 axis VMC) CNC Lathe (2-4 axis) CNC Swiss Lathe

Job Description2nd shift CNC Machinist, $18.00-$27.50 - LansingAre you looking for a new opportunity? Are you looking to start or continue your career as a CNC Machinist, which is a highly sought after skill? If so, this is the position for you!Preferred Qualifications: Certified Journeyman CNC Machinist Promote shop safety. Positive can-do attitude. Excellent organizational, analytical, interpersonal and communication skills. Ability to work well with others in a team environment. Preferred Skills: PC Literate. Ability to work in a fast paced and varying environment. Ability to interpret die designs. Experience as a CNC Machinist, Boring mill operator, conventional mill operator, etc. Be a motivated person, self-starter, personal and team orientated. This position is going from 5:00am-3:30pm, 2:30pm-12:30am or 3:30pm-1:30am M-Sat, with some Sunday OT as required. This is a temporary to full time hire opportunity! Let's go to work! Apply online today Equal Opportunity Employer#LS3

Job Title: CNC Machinist Greenville Tool and Die is looking for a skilled CNC Machinist to join the team. The individual will be responsible for setting up and operating CNC machines, ensuring precision and quality in the production of components. This role requires a strong understanding of the machining processes and blueprint reading. Key Responsibilities: Understand specifications of the tasks at hand and the desired result by reading blueprints, mechanical drawings etc. Configure machines by loading raw materials, installing necessary tools, and adjusting machine parameters (speed, feed, tool settings) based on job specifications. Prepare test runs to check if the machines product outputs are according to specifications. Continuously inspect parts for compliance with specifications using measuring instruments like calipers, micrometers, and other precision tools. Prepare and operate CNC Mills to perform tasks such as drilling, reaming, milling, etc. Keep accurate records of machine settings, parts produced, and any adjustments made during the production process. Machine Class A details within .0005” Maintain cleanliness in work area Always promotes and emphasizes safety. Required Skills and Experience: CNC Mill experience (three years minimum Okuma or Fanuc preferred) CNC Machinist Journeyman Status or Equivalent Proficient knowledge of common CNC milling techniques and practice Proficiency in writing and interpreting G-codes and M-codes to control CNC machine movements Skilled in reading technical drawings and blueprints to understand the specifications of the parts being manufactured High School Diploma or GED, preferred Analytical and numerical skills; ability to perform mathematical calculations Ability to work with decimals and fractions Use of basic measuring tools (tape measure, calipers, etc.) Good interpersonal skills and ability to work in a team environment Physical demands: While performing the duties of this job, the employee is regularly required to stand. The employee is frequently required to walk; use hands grip or handle; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and ability to adjust focus. Work environment: Manufacturing environment. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. For employment at Greenville Tool and Die you must pass a pre-employment drug screen and physical.

DEPARTMENT: Machining SUPERVISED BY: Machining Manager STATUS: Non-Exempt Technique, Inc. is a Michigan-based stamping, tubing and welding facility offering the shortest lead-times and highest quality parts in the industry. We offer high-speed prototypes, ultra-low volume stampings, tubing and assemblies for production and emergency-based manufacturing for industries such as aerospace, automotive, medical and food processing. As a Technique, Inc. valued team member, you will join a group of highly skilled technicians who consistently strive to improve the tools, technology and processes which allows us to continue growing at an incredible rate. The company is dedicated to the success of each team member in a culture that values safety, integrity, teamwork and results. Position Summary: Produces machined parts by operating, setting up and programming HAAS CNC mills & lathes, Flow Waterjet and Mitsubishi Wire EDM using Mastercam and SolidWorks to machine tools and parts for the prototype industry. Advancing in this position will require strong problem-solving skills, analytical skills, technical expertise and computer skills. Essential Job Functions: Set up, program, perform maintenance, and operate HAAS and FANUC CNC mills, lathes, and waterjet machines to make parts according to internal and customer standards based on engineering specs and blueprints Complete all job documentation Perform preventive maintenance and troubleshooting on all machines Read and interpret prints and complete advanced calculations required for machining parts to specifications Check and inspect in process and finished parts Make offsets and change tools for wear to hold tolerances 2D and 3D programming in Mastercam Modify/manipulate geometry in CAD to change desired toolpaths Design, set up and machine fixtures to machine parts Confidently program 4 and 5 axis machines Follow all safety guidelines including proper use of PPE All other duties as assigned Qualifications: EDUCATION: High school diploma or equivalent required, vocational training preferred CREDENTIALS/LICENSURE: Forklift operator's license preferred. MINIMUM EXPERIENCE: 2 years related experience. Position Requirements (Skills & Abilities): Ability to multitask accurately in a fast-paced environment Familiarity with HAAS CNC mill and lathes MasterCam and Solidworks 2D and 3D programming experience Familiarity with G Code and GD&T notation Basic shop math Good problem solving ability Travel: No travel is expected for this position Multiple shifts available: Monday-Friday - 7:00am-3:30pm Monday-Thursday - 3:30pm-2:00am ($1.00 per hour shift premium) Friday, Saturday, Sunday - 5:00am-5:30pm ($2.00 per hour shift premium) Saturday, Sunday, Monday - 5:00am-5:30pm ($2.00 per hour shift premium) Friday, Saturday, Sunday - 5:00pm-5:30am ($15.00 per hour shift premium) Physical Expectations: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Environmental Expectations While performing the duties of this job, the employee is frequently exposed to manufacturing processes that include and are not limited to; fumes or airborne particles, hazardous chemicals, moving mechanical parts, industrial equipment and vibration. The noise level in the work environment can be loud. Other Duties Please note this job description is not designed to cover or contain a complete comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. EEO Statement Technique, Inc., is an equal employment opportunity employer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Authorization Employee must be eligible to work in the United States, either by means of U.S. Citizenship, Work Visa or H1B sponsorship. E-Verify partner employer.

CNC Machinist Job Opportunity at Advance Turning & Manufacturing, Inc. Advance Turning & Manufacturing, Inc., a global leader in manufacturing machine components for Medical, Aerospace, and Space Exploration, is in search of experienced CNC Machinists for 2nd or 3rd shift to work at any of our three Jackson locations. Advance Turning & Manufacturing, Inc. is looking for individuals with a strong work ethic, perfect attendance, flexibility, reliability, and willingness to learn. We value team members who take pride in exceeding customer expectations and strive to meet shared goals. If this sounds like you, please apply today! Candidate Qualifications An ideal candidate would have experience with lathe and mill operations on Mori-Seiki, Mazak, or Haas equipment. Several years of CNC experience with other machinery will also be considered. If you believe you meet these qualifications, we encourage you to apply. Benefits at Advance Turning & Manufacturing - Non-contributing medical plan with the completion of an annual physical - Competitive wages - Dental coverage - Vision coverage - Short-term disability - Long-term disability - Life insurance up to $200,000 - Accident insurance - Critical illness insurance - 401(k) plan with a company match of 50% up to 8% - Company-paid safety glasses - Tuition reimbursement - Quarterly Team Meals - Employee Appreciation Program: We celebrate our team members' dedication and contributions through a program that offers recognition and rewards for years of service, starting after six months of employment. Rewards include access to branded merchandise, bonuses at milestone anniversaries, and more. Qualifications High school diploma or general education degree (GED) Nine to twelve months of related experience and/or training, or an equivalent combination of education and experience Up to three years of experience in a Quality Control function in a manufacturing environment Awareness of quality systems Summary/Objective This position produces machined parts by programming, setting up, and operating CNC machines. It involves maintaining quality and safety standards, keeping accurate records, and performing equipment maintenance.

CNC Machinist Weir Minerals St. Louis, MO 3rd Shift: 10:00pm - 6:30am Pay: $27- $36/hour ($2.50 shift premium) $1000 - Hiring Bonus!! Purpose of Role: Machinists are required to set up and adjust a variety of machines such as drill press, engine lathe, turret lathe, and machining center to produce parts such as volutes, butterfly valve bodies and disks, impellers, etc. Additionally, will be responsible for deburring parts. Why choose Weir: Be part of a global organization dedicated to building a better future: At Weir, the growing world depends on us. It depends on us constantly reinventing, quickly adapting and continually finding better, faster, more sustainable ways to access the resources it needs to thrive. And it depends on each of us doing the best work of our lives. It's a big challenge - but it is exciting. An opportunity to grow your own way: Everything moves fast in the dynamic world of Weir. This creates opportunities for us to take on new challenges, explore new areas, learn, progress and excel. Best of all, there is no set path that our people must take. Instead, everyone is given the support and freedom to tailor-make their own career and do the best work of their lives. Feel empowered to be yourself and belong: Weir is a welcoming, inclusive place, where each individual's contribution is recognized and all employees are encouraged to innovate, collaborate and be themselves. We continually focus on people and their wellbeing. We believe in fairness and choose to be honest, transparent and authentic in everything we do. Key Responsibilities: Machine Operations : Operate machine to prove-out setup and produce pilot work piece for inspection. Diagnose machine or tooling malfunction and make the proper and corrective adjustments. Setups involve the changing of the machine chucks, collets, face plates, tool feed rates, grind, shear, etc. Custom engineered parts fabrication for mining equipment. Technical Understanding : Work from complex blueprints, part drawings, specifications, setup instructions etc. Perform troubleshooting or minor program edits, efficiency improvements etc. 30% Mill- 70 % Lathe machining Precision Handling : Work on multi-tooled arrangements that have several operations with tight tolerances and important dimensional relations. Assembly or casting experience an asset Demonstrate 100% commitment to our zero harm behaviors in support of our drive towards developing a world class safety culture. Job Knowledge/Education and Qualifications: GED or High School Diploma required 3+ years of experience as a CNC Machinist preferred (set up/operator) Experience working with Fanuc controls is a plus, but not required. Benefits: Competitive Compensation Excellent Health / Dental / Vision Options 5% 401(k) Retirement Match 15 days Paid Time Off in first year 11 Paid Holidays per year Founded in 1871, Weir is a world leading engineering business with a purpose to make mining operations smarter, more efficient and sustainable. Thanks to Weir's technology, our customers can produce essential metals and minerals using less energy, water and waste at lower cost. With the increasing need for metals and minerals for climate change solutions, Weir colleagues are playing their part in powering a low carbon future. We are a global family of 11,000 uniquely talented people in over 60 counties, inspiring each other to do the best work of our lives. For additional information about what it is like to work at Weir, please visit our Career Page and LinkedIn Life Page. Weir is committed to an inclusive and diverse workplace. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, veteran status, disability, age, or any other legally protected status. #minerals #LI-KH1

CNC Machinist - 1st shift The CNC Machinist will program, set up, and operate CNC mills and lathes as part of the Flexfab Machine Build group. This role supports operations through custom-built machines and repairs, ensuring precision and efficiency in a dynamic service environment. Key Responsibilities Program, set up, and operate CNC mills and lathes to produce precision parts. Read and interpret engineering designs and convert them into CNC programs. Utilize SolidWorks and MasterCam software for programming and design tasks. Perform machine setup and ensure accurate operation for part production. Support the Machine Build team by: Providing efficient, personable service. Performing preventative maintenance. Managing tooling inventory. Maintaining shop cleanliness. Assisting with other machine build activities as needed. Communicate effectively with machine build, engineering, controls, and operations personnel. Prioritize work in a fast-paced environment and adapt to changing demands. Work overtime as required, often on short notice. Participate in skill-level testing as needed. Desired Qualifications Journeyman certification OR Certificate/Associate degree in CNC machining or related field. Completion of an accredited CNC machining program (minimum 40 credit hours). Proven experience in CNC programming and machining. Strong technical aptitude and desire to work in a machining and machine build environment. Effective communication and teamwork skills. Ability to manage priorities and maintain attention to detail under pressure Proficiency in SolidWorks and MasterCam. Experience in machine building and repair. Strong problem-solving and troubleshooting abilities. Physical Requirements Ability to stand for extended periods (up to 8-12 hours per shift). Frequent walking, bending, and reaching. Ability to lift and carry up to 60 lbs. regularly. Manual dexterity for handling tools and machine components. Visual acuity for reading blueprints and performing precision measurements. Tolerance for repetitive motions and working with machinery. How to apply: If you meet these qualifications and are interested in being considered for this position, please submit your application & updated resume at **************** Flexfab is an equal opportunity employer, to all protected groups, including protected veterans and individuals with disabilities. This position requires access to technical data subject to the International Traffic in Arms Regulations (ITAR). Only U.S. persons (citizens, lawful permanent residents, refugees, or asylees) are eligible.

ARCH Cutting Tools is seeking experienced machinists to join our team in Flushing. Must have experience in Haas, Fanuc CNC controls. Competitive wages and full benefit package. Generous shift premium, no waiting period on medical/dental/vision benefits and a great opportunity to join a growing company. Essential Duties and Responsibilities include the following. Other duties may be assigned: Ability to interpret blueprints to ensure parts are machined to specifications. Ability to set up fixturing, cutting tools, and other support equipment for machining of parts. General understanding of applying cutting tools for machining as well as calculating feeds, speeds, and depths of cut. Ability to read and interpret CNC G- code and programming languages. Ability to understand and modify CNC work offsets, tool radius offsets, and other parameters for CNC toolpath. Ability to use calipers, micrometers, dial indicators, and other quality control devices, as well as use the measurements gathered to properly adjust program and tool parameters to achieve quality standards. Maintain machine preventive maintenance and cleanliness. Keep surrounding work area clean and organized. Competencies: Experience with Haas, Fanuc, or CNC controls required. Ability to read blueprints and carry our job instructions from Mastercam or CAD software. Ability to perform simple to complicated mathematical processes. Ability to monitor quality of parts produced and work internal quality control. Safety - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: • Advanced education in the field of CNC Machining; or one to two years related experience and/or training; or equivalent combination of education and experience. Physical Demands: While performing the duties of this Job, the employee is frequently required to stand and walk. The employee is occasionally required to sit; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus. ADDITIONAL NOTES ARCH Global Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Precision are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Full-time Description Average Starting Pay Range $20.00 - $35.00, higher level machinists can earn more! Day Shift Monday - Friday 6:00 am to 4:30 pm 16% Night Shift Premium Available Monday - Thursday 4:15 pm - 4:45 am. 30% Weekend Shift Premium - Friday through Sunday 5:00 am to 5:30 pm PTO upon hire, Medical, Dental, and Vision Benefits are offered on the first day of the next month after hire, 401(K) after 6 months Overview: As a CNC Machinist for Keel Midwest, you will be responsible for operating CNC Machines in a job shop setting to manufacture complex, tightly tolerance components ranging from small to large from print and to exacting quality and delivery deadlines. On the job training is provided as needed. Job Functions: Performs advanced setup operations and adjusts machine tools to perform operations from provided programs. Adjusts and checks out programming. Operates CNC machine tools to perform complex series of progressive machining operations on a diverse line of work. Adjusts speeds and feeds during operation. Works from programming instructions, operational data, and machine setup instructions defining and coding tool arrangements, material clamping methods, machine calibrations, and console settings for operations such as bore, mill, drill, face, thread, and occasional profiling and contouring. Check parts for conformance to specifications. May run more than one unit simultaneously Physical Demands: Some heavy lifting, no more than 50 lbs without mechanical assistance. Bending, stooping, and twisting are normal motions during operation. Work Environment: Job shop manufacturing floor environment. As such, exposure to oil, dirt, debris, fumes moving machinery and equipment, and occasional high decibels are typical. Shop floor is climate controlled. PPE is required at all times. EEO STATEMENT KEEL is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected status. We believe in fostering a workplace that values diversity and promotes equity and respect for all. The job requirements are subject to change to reasonably accommodate qualified disabled individuals. Requirements High School Diploma or GED is required. An Associates degree in Machine Tool preferred. Specific evidence of supervisory training. Two (2) to five (5) years of experience in related position in the machine tool industry. Job Shop or Prototype experience. Experience in machining for a very diverse industry base such as: Mining, Aviation, Defense, Rail, Shipbuilding, Heavy Equipment, Gas & Oil and Machine Building. Experience in machining large and complex work. Ability to work from blueprints, sketches, and written specifications. Knowledge of GD&T. Salary Description $20.00 - $38.00/hour DOE

Job Title: CNC Apprentice The CNC Machinist Apprentice assists in the setup, operation, and maintenance of CNC milling and turning machines while completing a formal apprenticeship program. Working under the guidance of experienced machinists, the apprentice will gain hands-on experience and technical training needed to become a skilled CNC Machinist capable of producing precision parts for tools, dies, and fixtures. Apprentices will start on 1st shift for 1-2 years to gain experience and then transfer to night shift for 6.5 year period or otherwise negotiated. Key Responsibilities Learn to set up and operate CNC mills following detailed instructions. Assist in loading/unloading parts, selecting tooling, and installing fixtures. Read and interpret part drawings, blueprints, and CNC programs (G-code). Inspect parts using calipers, micrometers, and other precision measuring tools to ensure accuracy. Monitor machine operations and make minor adjustments to maintain quality and efficiency. Clean machines and maintain a safe, organized work area. Record time, materials, and completed tasks as part of apprenticeship documentation. Attend related technical instruction (RTI) classes and complete required coursework. Follow all company safety procedures and wear proper PPE in the machine shop. Communicate with mentors and supervisors to improve understanding and skills. Required Skills and Experience High school diploma or GED required. Enrollment in or willingness to enter a certified CNC Machinist Apprenticeship Program. Strong interest in machining, manufacturing, or mechanical trades. Basic understanding of shop math, measurement tools, and mechanical concepts. Ability to follow verbal and written instructions and ask questions when needed. Dependable attendance, positive attitude, and eagerness to learn. Physical demands: Ability to lift up to 50 pounds and perform physical activities such as standing, bending, and kneeling. Must be comfortable working in a machine shop environment (noise, grease, metal shavings, etc.). Use of PPE (safety glasses, steel-toe boots, gloves, hearing protection) required. Work environment: Manufacturing environment. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. For employment at Greenville Tool and Die you must pass a pre-employment drug screen and background check.