Numerical control operator jobs in Laredo, TX - 1,548 jobs

National Pump Company, a global leader in engineered pump solutions for municipal, industrial, and agricultural markets, is seeking an experienced Manual Machinist for our Lubbock manufacturing facility. The Manual Machinist is responsible for setting up and operating manual machining equipment to manufacture, repair, and modify pump components to precise specifications. This role requires strong knowledge of machining practices, blueprint interpretation, and precision measurement, with a focus on quality, safety, and productivity in a pump manufacturing environment. Manual Machining Operations Set up and operate manual lathes, mills, drill presses, grinders, and related equipment Machine pump components such as shafts, impellers, casings, wear rings, and bearing housings Perform turning, boring, milling, drilling, tapping, facing, and threading operations Maintain required tolerances and surface finishes per specifications Select appropriate cutting tools, speeds, and feeds based on material and job requirements Perform routine maintenance and cleaning of manual machining equipment Inspect machines for wear or malfunction and report issues as needed Properly handle, store, and maintain cutting tools, fixtures, and gauges Blueprint and Specification Interpretation Read and interpret engineering drawings, blueprints, routings, and work instructions Understand geometric dimensioning and tolerancing (GD&T) as applicable Verify dimensions, materials, and machining requirements prior to production Clarify discrepancies or unclear instructions with engineering or supervision Inspection and Quality Control Measure parts using micrometers, calipers, indicators, bore gauges, and other precision instruments Perform in-process and final inspections to ensure conformance to specifications Document inspection results as required Identify and correct machining errors or quality issues promptly Safety and Compliance Follow all safety procedures, including lockout/tagout and PPE requirements Maintain a clean and organized work area in accordance with 5S principles Comply with company policies, quality standards, and regulatory requirements Actively participate in safety meetings and continuous improvement initiatives Collaboration and Production Support Work closely with supervisors, engineers, and other machinists to meet production schedules Assist with troubleshooting machining or process issues Support cross-training and knowledge sharing within the machine shop Participate in continuous improvement and efficiency efforts Qualifications High school diploma or equivalent Minimum 2 years of experience as a manual machinist (pump or heavy industrial manufacturing preferred) Proficiency with manual lathes and mills Strong understanding of machining principles and tolerances Ability to read blueprints and use precision measuring tools Physical Demands Frequently stand, walk, bend, and reach throughout the work shift Lift and move materials between 70 and 100 lbs with or without assistance Manual dexterity and visual acuity required for precision work Exposure to noise, metal chips, cutting fluids, and industrial environments Work Environment Manufacturing shop environment Use of industrial machinery and tools Required use of personal protective equipment What We Offer Competitive wages and profit sharing Comprehensive benefits package including medical, dental, vision, 401(k), Age and Service, Stock Purchase, etc. Opportunities for professional growth within a respected, long-standing organization A collaborative culture focused on safety, quality, and continuous improvement About National Pump Company National Pump Company designs and manufactures high-quality pumping solutions used worldwide in critical infrastructure applications. With a history spanning more than 50 years, we are committed to innovation, reliability, and operational excellence.

The following position is responsible for the grinding process in the manufacturing cycle. The work assigned is based upon the individual's training, experience, and ability. The roll grinder is expected to perform the requirements of the job per the Standard Operating Procedures and specific job Instructions recorded on the job router. The Supervisor may assign specific equipment or other tasks at the supervisor's discretion. Job Duties: Reading and interpreting production schedules, job router cards, blueprints, non-conformance reports, and any other materials that summarize requirements for the grinding of rubber rolls. Locating and retrieving rolls to the grinding production area utilizing overhead cranes and various materials handling equipment. Preparing the individual rolls for installation in the grinding equipment, utilizing knives to trim back rubber from the rollers prior to installing the rollers into the equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, such as die-grinders or sheet abrasive/polishing materials. Setting the grinding equipment, installing special grinding wheels or attachments, adjusting and setting tooling on tool posts, installing live-centers, chucks centers, extensions, dogs, etc. Aligning the rollers in the equipment to meet all dimensional requirements of job order. This includes adjustment for taper, TIR, roller surface finish, and finish dimensions. Measure all required dimensions and understand the relationship of the dimensions to the specific requirements of the job. Utilize all inspection and measurement equipment per procedure and instruction, including durometer gauges, pi-tapes, P&J gauges, micrometers, vernier diameter tapes, dial indicators, profilometers, temperature-indicating devices, and others as needed. Complete the grinding operation and inspect the finished product to ensure that all requirements are met. Complete all necessary paperwork, inspection reports, job router information, and operator sign-off on job. Clean all metal and rubber surfaces prior to protective wrapping. Unload the grinding equipment safely and without damage or harm to personnel, equipment or finished product. Deliver the finished product to a designated storage area or shipping container. Safely operate the grinding equipment to produce the desired results and meet the specific job requirement. Maintain a clean work environment, floors swept, supplies properly stored, equipment cleaned and well maintained. Other duties as assigned by supervisor. Qualifications: Language Skills Read, write, and understands English. Read mechanical blueprints and interpret technical documents. Write legible documentation conforming to prescribed style and format. Communicates effectively. Mathematical Skills Utilize all inspection and measurement equipment per procedure and instruction, including Durometer gauges, Micrometers, Vernier diameter tapes, Dial indicators, Profilometers, temperature-indicating devices, and others as needed. Understands/applies basic math, including accurate addition, subtraction, multiplication, and division. Other Skills Learn and utilize safe operating procedures. Strong reasoning ability. Physical Requirements: Stand, bend, and stooping for extended periods of time. Reaches by extending hand(s) or arm(s) in any direction. Ability to exert up to 50 pounds of force, and/or up to 25 pounds of force frequently. Required ability to use finger and hand dexterity to manipulate objects and lift 50 pounds. Vision ability within normal parameters. Hearing within normal range. Coordination to step over and maneuver around obstacles. Demonstrates safe operating habits. Education and Experience: High school diploma, GED, or high school equivalency #IND Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.

: John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description: We are seeking an experienced CNC Programmer to help modernize and improve our machining operations. This role is ideal for someone who thrives on problem-solving and wants to take an active role in converting legacy machines from manual programming to modern CAD/CAM and conversational programming platforms. Develop and maintain offline N/C programs using CAD/CAM software for CNC turning and machining centers. Analyze existing manual or outdated programming methods and transition machines to conversational or feature-based programming. Work with Hexagon or similar software platforms for automated programming and feature recognition. Maintain and update manufacturing databases and documentation related to standards, methods, tooling, and inspection. Interpret engineering drawings and specifications to determine manufacturing requirements. Collaborate with machinists and engineers to troubleshoot and resolve issues related to programming, tooling, and machining processes. Validate and verify CNC programs for accuracy prior to release to the shop floor. Specify machining data, tooling requirements, and work holding strategies. Participate in Lean Manufacturing initiatives and continuous improvement projects. Maintain organized records for all CNC programs and associated documentation. Qualifications: 3-6 years on-the-job experience in the Manufacturing or Industrial Engineering field. Proficiency in CAD/CAM systems (Mastercam, FeatureCAM, GibbsCAM etc.). Experience with conversational programming and upgrading legacy machines. Experience creating offline CNC programs compatible with Fanuc, Siemens, and Haas controllers, including post-processing for different machine platforms. Familiarity with Hexagon software or similar automated programming platforms. Strong understanding of machining processes, tool paths, and G-code. Ability to work independently while collaborating with cross-functional teams. Additional Information: With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Morrison Healthcare We are hiring immediately for full time NUTRITION OPERATOR positions. Location: Texas Children's Hospital - Main Campus - 6621 Fannin Street, Houston, TX 77030. Note: online applications accepted only. Schedule: Full time schedule; Days and hours may vary. Potential for rotating weekends and holidays. More details upon interview. Requirement: Prior experience with patient dining, food safety, and strong customer service is preferred. Perks: on-site training! Pay Range: $17.76 per hour to $20.50 per hour. Make a difference in the lives of people, your community, and yourself. Join a culture of opportunity with Morrison Healthcare. Our careers are filled with purpose and empower you to transform healthcare experiences. Take a look for yourself at the Power of Food! Morrison Healthcare is a leading national food and nutrition services company supporting more than 1,000 hospitals and healthcare systems across 46 states, many of which are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. For over 70 years, Morrison has been serving some of the nation's largest health systems and bringing a culinary, nutritional, and operational expertise that truly transforms the healthcare dining experience. Morrison has more than 1,600 registered dietitians, 1,200 executive chefs, and 31,000 professional food service team members. The company has been recognized as one of Modern Healthcare's Best Places to Work since 2012. Job Summary Summary: Responsible for securing patient meal selections and special requests and needs via telephone or face to face interactions. Essential Duties and Responsibilities: Follows proper telephone etiquette and procedures with patients, visitors and healthcare professionals. Offers alternatives to menu as allowed on prescribed diet in accordance with food allergies and sensitivities, cultural, ethnic and religious preferences, when patient inquires or needs additional selections. Responsive to patients needs at all times. Resolves patient concerns or complaints immediately and/or reports needed assistance to supervisor as appropriate. Complies with dietary restrictions on special, modified diets to ensure optimal food preferences are met within guidelines of diet order limitations. Interacts with nursing to ensure patients diet prescriptions are accurate, and patients food needs are met. Adheres to facility confidentiality and patients rights policy as outlined in the facilitys HIPAA policies and procedures. Complies with federal, state and local health and sanitation regulations and department sanitation procedures. Follows HACCP guidelines when assembling and distributing food supplies to ensure quality and safety of food supply. Completes all daily, weekly or monthly reports as outlined in the corporate policies and procedures on a timely basis meeting all prescribed deadlines. Performs other duties as assigned. BENEFITS FOR OUR TEAM MEMBERS * Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program * Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Morrison Healthcare is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Morrison Healthcare maintains a drug-free workplace.

Qualification Requirements: Physical Requirements: Good hearing and able to communicate effectively. Able to work comfortably in dangerous work environments. Requirements: Must be at least 18 years of age. Able to identify shop safety hazards. Strong knowledge of safety requirements. Attention to detail. Knowledge of metals and their properties. Ability to produce high quality work. Able to understand spoken and written English effectively. Able to pass post offer substance testing. Essential Functions: Uses a variety of tools to measure, calculate, cut and modify materials. Processes skills and knowledge to safely operate machine shop tools and equipment. Follows established manufacturing methods using standard machine tools, materials and equipment. Adjusts feeds, speed, and depth of cut to machine quality. Reads diagrams and blueprints and manufactures metal parts to precise specifications. Set up tools such as milling machines, grinders, lathes and drilling machines. Correctly use precision measuring tools. Routinely maintains equipment to ensure cleanliness, accuracy and reliability. Physical Demands: Physically demanding job which requires lifting heavy objects, twisting, bending and reaching. Must be physically agile and able to work in confined spaces as well as high elevations. Work Environment: Exposure to varying extreme climates and outside weather conditions (heat/cold, wet/humid). BE SURE TO APPLY ON OUR WEBSITE: ****************

Work days/Shift Hours - if applicable: 2-2-3, 5:30PM - 5AM Compensation: Starting pay ranges from $20.00 to $23.50 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. Additional Relevant Information: Will train for this position. General Purpose Responsible for operating various manual and automated equipment in the production process. Duties and Responsibilities Set up machinery ensuring all production materials are available. Assist with change overs as necessary. Safely operate and monitor all equipment. Visually inspect production run and report malfunctions to maintenance department. Maintain required records. - Maintain cleanliness of assigned area. Ensure compliance with regulatory and company policies and procedures. Qualifications Education: High School diploma or equivalent preferred. Experience: 1-3 year of general work experience required. Prior production/manufacturing machine operation experience preferred. Previous experience within high-speed industrial environment. Ability to operate manufacturing equipment. Knowledge of industrial technology a plus. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

Machinists ensure the continued operation of equipment by performing preventive maintenance and/ or breakdown repairs on machinery, rotating equipment, and mechanical systems. These tasks are completed following diagrams, sketches, operations manuals, manufacturer's instructions, engineering specifications, journeyman troubleshooting protocols, and following procedures. Locates source of problems by observing mechanical devices in operation, listening for problems, using precision measuring and testing instruments, and utilization of equipment history failure knowledge. What will be expected from you? Removes defective parts by dismantling devices using maintenance tools hoists, cranes, hand and power tools, ladders, lifts, etc. Examines form and texture of parts to changes in the dimensional requirements of parts, inspecting and using measurement devices such as rulers, calipers, micrometers, and others. Replaces parts or rebuilds systems as necessary to maintain cost effectiveness of equipment and prevent mechanical failure. Maintains mechanical knowledge by documenting and communicating actions, irregularities, and continuing needs. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory levels, and anticipating parts and equipment needs and communicating these needs. Team to identify process problem areas and learning how to communicate them up and through the organization using appropriate means of communication. Gain hands on experience using and implementing SAP records for tracking and managing maintenance daily activities. Participate in job hand-offs to fellow associates and conduct key operator communications to help properly diagnose malfunctions and to communicate progress of repairs. Maintains technical knowledge by attending educational workshops, reviewing technical publications, and completed all site required computer-based training. Participates in audits, investigations, HAZOPs, PHA's and quality efforts in the areas as needed. Maintains good housekeeping of equipment, parts storage, and shop work areas. Controls downtime by alerting production employees of routine preventive maintenance techniques, how to avoid equipment stresses via operational adjustments. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the Ideal Candidate? Minimum of 10 years of experience working with rotating equipment and related machinery as a journeyman machinist/millwright required, education or apprenticeship may possibly be substituted for some years of experience. Machine shop equipment experience including manual lathe, balance machine, milling machine, drill press, and surface grinders. Possession of a Millwright, Industrial Millwright or Machinist NCCER certificate or comparable technical certificate is a plus. NOTE: Having any of these certificates can count towards some years of experience. Must possess or be eligible to obtain a Transportation Worker Identification Credential (TWIC). Must have a level of proficiency with SAP, Internet, Email and Microsoft Office programs. Demonstrate a satisfactory level of technical and professional skills/knowledge in the millwright discipline. Demonstrate knowledge and experience with all commonly used concepts, practices, and procedures within the millwright field. Knowledge of Reverse, Rim/Face, and Laser Alignment Methods Must be able to climb ladders and stairs. Must be able to work at elevated heights and work in confined spaces.

McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. OPERATOR McGough Construction is hiring for operating engineers who are certified in Rough Terrain Forklifts and/or hold the CCO certification for Mobile Hydro-Cranes and Tower Cranes. This is a full-time hourly position with union pay scales per regional location. Job Responsibilities: Major functions include running rough terrain forklifts, mobile hydro-cranes, and tower cranes. Job Qualifications: This position is physically demanding with the large majority of work in outdoor conditions.

The Robotic Welder Operator works with little or no instruction in performing robotic welding of steel in various shapes, sizes, and thicknesses as needed for projects. Duties and Responsibilities: Programs, sets-up, and operates robotic welder. Builds or modifies tooling for product and new design. Complete fit-up of structure, pipe and accessories for vessels. Welds in multiple positions. Trains and mentor others. Identify various metals and alloys such as mild & high strength steel, aluminum, and stainless as well as identify structural shapes. Use measuring devices and gauges to determine thickness and size of metal. Use oxygen/acetylene torch for cutting metals. Use grinder and other hand or power tools required to grind, bevel, or fit metals together, and remove slag. Read and follow blueprints to determine structure or fit of parts that are being welded and are in compliance with the Method of Production Standard. Maintain work area and equipment in a clean orderly condition and follow prescribed safety procedures. May perform other duties as assigned. Skills and Specifications: Good knowledge of welding procedures, practices, symbols, and techniques required to weld and/or fuse metals together. Skilled ability to use hand and power tools associated with welding, such as chipping hammer, grinder, arc welder, and oxygen/acetylene torch including setup or connection of hoses, cords, and regulators. Accomplished ability to read and comprehend blueprints and/or sketches. Demonstrated proficiency with computers. Knowledge and ability to use common measuring instruments and hand tools such as tape measure, level, square, file or rasp. Solid problem-solving skills. Ability to contribute and work in a team environment. Ability to demonstrate accuracy and thoroughness to ensure first quality of work. Ability to establish and maintain healthy working relationships with people in course of work. Willingness to work additional hours in order to meet tight deadlines. Ability to safely operate a forklift. Skills and Education: High School Diploma or GED with additional technical training in welding and machine operations. Proficient in both verbal and written English. Basic math comprehension: counting, arithmetic, interpreting numerical information such as ranges and an understanding of units of measure including metric system.

Monitors and controls natural gas flow on client interstate pipeline and gathering systems to assure daily receipt and delivery requirements are met within DOT and tariff standards while optimizing compression equipment usage and maintaining safe operations. Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. Operates and controls natural gas flow through pipelines from Gas Control Center using a supervisory control and data acquisition (SCADA) computer system. Monitors flows, pressures and gas qualities across system and responds to SCADA system alarms to provide safe and reliable service. Provides daily forecasts of system-wide gas requirements and adjusts to differences between forecasted and actual. Plans and executes adjustments to pipeline flows, compression and line pack to meet current and anticipated customer needs. Interfaces with gas schedulers and pipeline operations to maintain collaborative interdepartmental and cross-functional working relationships among office and field employees. Completes and maintains at required intervals Operator Qualification Training as required by Company and DOT regulations. Assists supervisor of gas control in the development of daily volume reports and gather operational data as needed. Regularly uses and maintains spreadsheets, database and word processing software, and periodically learn new programs. Gathers and documents information for pipeline and production related incident reports. Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); and minimum one year related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have knowledge of general computer skills, including Microsoft Office Suite- Excel, Word, PowerPoint and Outlook. Certificates, Licenses, Registrations N/A Other Skills and Abilities Strong analytical and collaboration skills. Ability to communicate clearly, both verbally and written. Ability to work rotating 12-hour shift including nights, weekends and holidays. Other Qualifications Working knowledge of gas hydraulics and compressors.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

RIVR is a Swiss robotics company pioneering Physical AI and robotic solutions to revolutionize last-mile delivery, giving 1 human the power of 1000. Through the combination of artificial neural networks and innovative robot designs with wheels and legs, RIVR aims to enhance efficiency, sustainability, and scalability in last-mile delivery. Founded as Swiss-Mile, the company rebranded to RIVR in 2025 to better reflect its mission of driving the future of intelligent robotics. As a Field Robot Operator, you will be responsible for driving a van and deploying our robot fleet in Austin, TX. You will work closely with remote operations teams to ensure the robot is deployed safely from our vans and successfully and efficiently carries our deliveries in accordance with our target volumes. Shifts last four to eight hours and may also be in early mornings and late evenings. For individuals that are eager to get full exposure to robot operations or seek more variety in daily tasks, it is also possible to combine the Field Robot Operator and Remote Robot Supervisor role.What you'll be doing Field Operating: Driving the van to delivery points, ensuring safe and efficient deployment of robots to and from the van and supporting the robot on its delivery drives, with a focus on meeting our delivery volume targets. Intervention and Safety: Perform the critical safety responsibility of intervening and controlling the robot in the unlikely event that the autonomy or remote supervision fails. In addition, safely driving the van vehicles and adhering to traffic laws and regulations at all times. Public Interactions: The Field Operator role is very much the "human face" of RIVR as it is likely to be the most common way that members of the public will interact with our robots. Therefore professionally handling different situations and interactions with members of the public in live operations is a key responsibility of the role. Data & Feedback: As we are building and scaling operations in Austin, a requirement of this role is to collect data and feedback from the field and communicate this to various internal teams with the view to improve operational efficiency, safety and value for our partners. Varia: Assisting with the onsite team to build and scale the Austin operations by helping out with hub-based tasks and offering support when needed to technical and remote operations teams when required. What you must have Education: High school diploma or equivalent. Language: Knowledge of basic English. Normal US Driving License (Class D) Get some bonus points Language: Knowledge of basic Spanish. Flexibility for shifts or extended hours during critical operations. Prior experience with operation of machines or equivalent. Due to visa sponsorship limitations, we can only consider candidates who are legally authorized to work in the U.S. at the time of application. RIVR is committed to building a diverse and inclusive team that values every perspective. If you're passionate about driving innovation in robotics and creating meaningful impact, we encourage you to apply and bring your unique self to our team. We believe the best work is done when collaborating and therefore require in-person presence in our office locations.

Job DescriptionDescription: The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: Review work orders and shop drawings to confirm dimensions and material availability Set up workstations, fixtures, and robotic welding equipment Perform dry runs on initial pieces to verify accuracy Operate the robotic welding system to complete production jobs Inspect completed work and sign off on operations Requirements: Knowledge, Skills & Abilities Ability to read and interpret shop drawings Basic math skills and experience using measuring tools Familiarity with robotic welding equipment Strong focus on quality and productivity Ability to organize, prioritize, and manage multiple tasks Effective verbal and written communication skills Ability to stand for extended periods Ability to lift, push, and pull up to 25lbs unassisted Work Environment Typical machine shop environment Willingness to work additional hours as needed Willingness to be cross trained on multiple machines Minimum Qualifications High school diploma or GED Experience in a shop environment with robotic and plasma cutting equipment Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job - you gain access to a range of benefits designed to promote your well-being, growth, and financial security. Health, dental and vision insurance 401K with company match Life Insurance Flexible Spending Accounts Generous annual time off policy 12 Company-Paid holidays A Solid Wellness Program to support your personal health goals Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company - APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Shift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

Our client is now hiring Lathe Machine Operator in Saginaw, TX at a pay rate of up to $23/hour (DOE) in a fast paced environment at a company that is an industry leader in Bulk Solids Handling. These are temp-to-hire positions - convert to a full-time employee after 90 days! Benefits & Perks: Weekly pay Day 1 benefits including medical, dental, and Telemedicine Employee assistance 401k program Leadership responsibilities with opportunity to train new associates Direct involvement with advanced manufacturing equipment Career advancement opportunities Perks once you convert to full-time: Company uniforms provided Structured pay increases every 6 months Long-term career development within a growing team About the Role: We are seeking a skilled Lathe Machinist to join our team. The ideal candidate will have hands-on experience with manual lathes and mills, a strong understanding of machining tools and techniques, and the ability to interpret technical blueprints. This role requires attention to detail, adherence to safety regulations, and a commitment to producing high-quality work. Pay Rate: $20-23/hour (DOE) Available Shift Times: Client will discuss shift options available Key Responsibilities: Setup, operate, and maintain manual lathes and mills. Apply knowledge of machining tools (drills, inserts, etc.) as well as feeds and speeds to maximize efficiency and tool life. Load raw materials, select appropriate cutting tools, and se machine parameters like speed and feed rates. Cut, drill, bore, and turn materials to create parts according to blueprints and specifications. Machine parts to dimensions and tolerances as specified on blueprints. Inspect finished parts to ensure they meet quality and precision standards, making necessary adjustments to the machine or the parts themselves. Detect and report defective material or questionable conditions to supervision. Maintain work area and equipment in a clean and orderly condition. Follow and enforce all safety regulations and company procedures. Key Requirements: Ability to read and use a tape measure and other measuring tools such as calipers and micrometers. Strong ability to read and interpret blueprint drawings. Proficiency in operating lathe machines and using various cutting tools. Ability to lift up to 50 pounds. Strong attention to detail. Strong analytical and mathematical skills for interpreting drawings and specifications. Good problem solving and troubleshooting abilities. Ability to safely operate and use an overhead crane. Physical ability to handle materials and operate machinery. Familiarity with computers and Windows-based programs is a plus. Must follow and enforce strict safety regulations, including proper use of PPE (safety glasses, mask, steel toe shoes). Team-oriented with strong communication and collaboration skills. Find your next opportunity with Integrity! If you're ready to join our team, apply NOW and start work fast! About Integrity Staffing Opportunity is everything. At Integrity, we're passionate about connecting great talent with great companies across North America. We take an associate-first approach because when our associates succeed, our clients succeed. If you're looking to grow your career, or just need a part-time gig, you've come to the right place. We've got thousands of job opportunities available at amazing companies across the country. Plus, we offer benefits that provide better lives, both on and off the clock. Medical and dental are just the beginning. From free online education programs to financial tools, we provide the opportunities, programs, and community resources our associates need to be successful, productive, and fulfilled. If you're ready for your next challenge, we're ready to be your Opportunity Engine. Let's work together. Integrity Staffing Solutions is an Equal Opportunity Employer.

Monitors and controls natural gas flow on client interstate pipeline and gathering systems to assure daily receipt and delivery requirements are met within DOT and tariff standards while optimizing compression equipment usage and maintaining safe operations. Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. Operates and controls natural gas flow through pipelines from Gas Control Center using a supervisory control and data acquisition (SCADA) computer system. Monitors flows, pressures and gas qualities across system and responds to SCADA system alarms to provide safe and reliable service. Provides daily forecasts of system-wide gas requirements and adjusts to differences between forecasted and actual. Plans and executes adjustments to pipeline flows, compression and line pack to meet current and anticipated customer needs. Interfaces with gas schedulers and pipeline operations to maintain collaborative interdepartmental and cross-functional working relationships among office and field employees. Completes and maintains at required intervals Operator Qualification Training as required by Company and DOT regulations. Assists supervisor of gas control in the development of daily volume reports and gather operational data as needed. Regularly uses and maintains spreadsheets, database and word processing software, and periodically learn new programs. Gathers and documents information for pipeline and production related incident reports. Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); and minimum one year related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have knowledge of general computer skills, including Microsoft Office Suite- Excel, Word, PowerPoint and Outlook. Certificates, Licenses, Registrations N/A Other Skills and Abilities Strong analytical and collaboration skills. Ability to communicate clearly, both verbally and written. Ability to work rotating 12-hour shift including nights, weekends and holidays. Other Qualifications Working knowledge of gas hydraulics and compressors.

Job Title:Laser Punch Press Operator- 2nd Shift Company:Munters Corporation About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on. Scope: Perform duties setup and operate punch press to cut, specified metal sheets to defined specifications and set and operate a range of metal fabrication equipment to cut, notch, and shape metal parts, working within the limits of standard or accepted practice. Essential Duties: Work from job packets, bill of materials (BOM), blueprints, drawings, and/or production schedule. Perform machine startup and shutdown procedures on punch press equipment. Position work piece onto table with hands or crane, using vacuum system to hold piece in place. Layout cuts on computer and select tooling according to thickness and type of metal. Interpret job information to determine specific material requirements. Layout operations to maximize material utilization. Label completed parts with appropriate part number. Remove chips and drop from parts and staging table. Determine sequence of operation for each process and edit program based on sequence. Rack and move pieces to staging area. Verify conformance of first piece to specifications using calipers, protractors, gauges, and measuring tape. Gauge work pieces randomly through run to ensure maintenance of settings and make adjustments as necessary. Perform quality checks, complete check lists, verify counts, record time per job and ensure compliance with production schedules. Submit production documentation as required. Stage completed parts for movement or move to subsequent operations to maintain workflow. Maintain a clean and safe work area. Take responsibility for the physical inventory of materials. Request material reorders as necessary. Other Duties: Perform or assist with any operations, as required to maintain workflow and to meet schedules and quality requirements. Maintain work areas in a clean and orderly condition. Consistently operate in keeping with all safety rules and requirements. Participate in any variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specified level of knowledge pertaining to new developments, requirements, and policies. Perform other related duties as assigned. Tools and Equipment: Use hand tools, tape measure, calipers, protractors, cranes, forklift, carts, pallets, computer, fiber laser cutting machine, pneumatic tools, and protective devices. Minimum Personal Protection Equipment (PPE): Safety Glasses - ANSI Z87.1 Gloves- ANSI Cut 3 4544 Sleeves- ANSI Cut 3 4544 Foot Protection, Steel Toe - ASTM F2413-11 Ear protection Physical Demand: Frequently push with up to 120 lbs. of force. Occasionally push and pull up to 50 lbs. Frequently lift and carry up to 40 lbs. Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, and reach. Visual and aural acuity Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, and reach. Benefits: Competitive Salary Comprehensive health, dental, and vision insurance plans Generous vacation and paid time off 401K retirement savings plan with employer matching Professional development opportunities, including tuition reimbursement, and conference attendance Company-sponsored social events and team-building activities State-of-the-art equipment and tools to support your work Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position. #HPMUNTERS

Work days/Shift Hours - if applicable: 4:45 PM - 5:00 AM / Monday - Friday Compensation: Starting pay ranges from $19.10 to $24.01 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. General Purpose Responsible for operating various manual and automated equipment in the production process. Duties and Responsibilities Set up machinery and ensure all production materials are available. Operate and monitor equipment and replenish materials as needed. Visually inspect production run and document results. Determine and report malfunctions to appropriate parties. Maintain cleanliness of equipment and assigned area. Qualifications High School diploma or equivalent preferred. 1-3 years of general work experience required. Prior production/manufacturing machine operation experience preferred. Previous experience within high-speed industrial environment. Ability to operate manufacturing equipment. Knowledge of industrial technology a plus. Basic math skills and reading comprehension. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. OPERATOR McGough Construction is hiring for operating engineers who are certified in Rough Terrain Forklifts and/or hold the CCO certification for Mobile Hydro-Cranes and Tower Cranes. This is a full-time hourly position with union pay scales per regional location. Job Responsibilities: Major functions include running rough terrain forklifts, mobile hydro-cranes, and tower cranes. Job Qualifications: This position is physically demanding with the large majority of work in outdoor conditions.