Numerical control operator jobs in Metairie, LA

Main Purpose: To nest parts to be cut by the Burning Machines, And to Coordinate Burning activities in the Plate Shop. Essential Functions: Nesting Piece Marked Plates form the Lofting Department Make sure that all parts are cut from the correct material Make sure that all piece markings are on the corresponding pieces when cut Make sure that daily maintenance records are kept on all NC Burning Machines Make sure that all maintenance is completed on all NC Burning Machines Daily Keeps records of plate inventors Performs Overhead Crane inspections in the Plate Shop Make sure that all cut parts are distributed to the correct job site Perform other duties assigned by supervisor Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: Must be able to pass pre-employment physical and drug screen Must be able to pass a background check Desirable Experience/Training: Working knowledge of the practices and procedures of Cutting Machines and Computer Knowledge High school diploma or equivalent preferred Tools, Equipment, and Technology: Floor Jack Hand torch Grinder Tape Measure Straight Edge Square Forklift experience a plus Environmental Conditions 80 to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means. #IND25

Job DescriptionOverview **Now Hiring: CNC Machine Operator - Day Shift | Competitive Pay + Steady Hours! ** Responsibilities Set up and operate CNC machines for various production runs. Perform equipment troubleshooting to resolve any operational issues. Utilize CNC tooling and programming to ensure high-quality output. Conduct manual machining tasks as needed to support production. Apply shop math skills to calculate dimensions and tolerances. Maintain a clean and organized work environment. Collaborate with team members to improve processes and efficiency. Qualifications Proven experience as a CNC Operator. Strong troubleshooting skills with a focus on equipment maintenance. Proficient in CNC tooling. Experience with machine setups for production runs. Manual machining skills are a plus. Solid understanding of shop math and measurement techniques. Ability to work independently and as part of a team. High attention to detail and commitment to quality. You should be proficient in: Equipment Troubleshooting CNC Tooling Troubleshooting Skills CNC Programming Standard Operating Procedures (SOPs) Machine Setups for Production Runs Manual Machining Skills Shop Math Skills

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Overview/ Job Responsibilities Be a part of our team contributing to our mission in space. We are seeking a driven and detail-oriented engineering professional to support Boeing production of major components of the NASA Space Launch System. This role is key to quantifying quality improvements and ensuring mission readiness for spaceflight-critical hardware. You will play a pivotal role in maintaining compliance with NASA and Boeing engineering requirements, while working closely with production, quality, and engineering teams to ensure the quality of produced products. What You'll Do The candidate shall support the following activities for the Boeing Manufacturing, Assembly and Operations (MA&O) Integrated Product Team (IPT): Integrate production and manufacturing knowledge, information and requirements into the producibility review as the designated Integrated Product Team (JPT) interface Provide manufacturing input throughout all phases of structural hardware procurement Lead/support the planning, development, modification and execution of program procurement plans, and schedules; coordinate with affected organizations regarding impacts to hardware procurement efforts Review, evaluate and provide comments to Engineering drawings and documentation required to successfully procure Space Launch System (SLS) Core Stage vehicle structural hardware components (Producibility) Provide support on-site at Supplier locations during the manufacture of components as required Assist in the review and of detailed Project schedules of Supplier processes as they relate to the manufacture of component hardware Primary manufacturing focal throughout the acquisition, definition, production and support phases of structural hardware procurement In depth knowledge of manufacturing processes and procedures What You'll Deliver Data collection plan for gathering required information in the field Compilation of the data acquired, in the coordinate system(s) specified Report on the findings and conclusions drawn from the collected data Creation and maintanance of training records and best-practice procedures What You'll Bring Strong background in engineering data collection and analysis Experience with NASA, Boeing, or aerospace/defense standards related to data collection Knowledge of coordinates systems and how to define and capture datum features on 3D structure Solid understanding of engineering drawings, process specs, and test documentation Experience supporting audits, quality reviews, and document traceability Excellent communication, collaboration, and documentation skills Flexibility to work off-shifts or changing schedules based on production needs This is more than a support role-this is your opportunity to help shape the quality and reliability of the systems that carry our mission beyond Earth. Join our team and make your mark on the future of spaceflight. Minimum Qualifications Qualifications/Requirements 5-10 years Engineering experience with data collection Knowledge and ability to understand and interpret technical data Understanding of how to a define coordinate systems and redefine data into a different coordinate system. Skill and ability to collect, organize, synthesize, and analyze data; summarize fundings; develop conclusions and recommendations from appropriate data sources Familiarity with associated validation software for comparative analysis. Ability to document and report on results and address discrepancies. Experience with the application of geometric dimensioning & tolerancing (GD&T) per ASME YI4.5. Knowledge of measurement systems (e.g., photogrammetry, coordinate measuring machines, laser tracker, laser radar, laser alignment, portable measurement tools). Ability to review and gather required information from 3D CAD models and 2D drawings. Must have experience writing process plans and data reports. Occasional overtime may be required. Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays Bachelors degree in Engineering preferred Prior Aerospace experience preferred Ability to obtain access to NASA facilities Must be able to pass drug test Must be US citizen for government clearance or contract compliance This job is expected to be 100% onsite. The selected candidate will be required to work onsite at Michoud Assembly Facility in New Orleans, LA. Desired Qualifications Desired technical skills to satisfactorily perform the above tasking would require: Degree preferred but not required. Past experience on SLS, External Tank, Delta, Atlas, etc. desired Previous experience with Spatial Analyzer and PRO-E/Creo Parametric software Experience scripting laser inspection sequences within the Spatial Analyzer software, including the import of CAD models & definition of the appropriate axis system per GD&T requirements. Use of Leica laser tracker equipment About Sev1Tech LLC Welcome to Sev1Tech! Founded in 2010, we are proud to be a leading provider of IT modernization, engineering, and program management solutions. Our commitment is to deliver exceptional program and IT support services that empower critical missions for both Federal and Commercial clients. At Sev1Tech, our mission is clear: Build better companies. Enable better government. Protect our nation. Build better humans across the country. We believe that through innovation and dedication, we can make a significant impact on the communities we serve. Join the Sev1Tech family, where your potential for greatness is limitless! Here, you will not only achieve remarkable accomplishments but also enjoy a fulfilling and rewarding career progression. We invite you to explore opportunities with us and become part of a team that values your contributions and growth. Ready to take the next step? Apply directly through our website: Sev1Tech Careers and use the hashtag #join Sev1Tech to connect with us on social media! For any additional questions or to submit referrals, feel free to reach out to ***********************.

Overview/ Job Responsibilities Be a part of our team contributing to our mission in space.We are seeking a driven and detail-oriented engineering professional to support Boeing production of major components of the NASA Space Launch System. This role is key to quantifying quality improvements and ensuring mission readiness for spaceflight-critical hardware. You will play a pivotal role in maintaining compliance with NASA and Boeing engineering requirements, while working closely with production, quality, and engineering teams to ensure the quality of produced products. What You'll Do The candidate shall support the following activities for the Boeing Manufacturing, Assembly and Operations (MA&O) Integrated Product Team (IPT): * Integrate production and manufacturing knowledge, information and requirements into the producibility review as the designated Integrated Product Team (JPT) interface * Provide manufacturing input throughout all phases of structural hardware procurement Lead/support the planning, development, modification and execution of program procurement plans, and schedules; coordinate with affected organizations regarding impacts to hardware procurement efforts * Review, evaluate and provide comments to Engineering drawings and documentation required to successfully procure Space Launch System (SLS) Core Stage vehicle structural hardware components (Producibility) * Provide support on-site at Supplier locations during the manufacture of components as required * Assist in the review and of detailed Project schedules of Supplier processes as they relate to the manufacture of component hardware * Primary manufacturing focal throughout the acquisition, definition, production and support phases of structural hardware procurement * In depth knowledge of manufacturing processes and procedures What You'll Deliver * Data collection plan for gathering required information in the field * Compilation of the data acquired, in the coordinate system(s) specified * Report on the findings and conclusions drawn from the collected data * Creation and maintanance of training records and best-practice procedures What You'll Bring * Strong background in engineering data collection and analysis * Experience with NASA, Boeing, or aerospace/defense standards related to data collection * Knowledge of coordinates systems and how to define and capture datum features on 3D structure * Solid understanding of engineering drawings, process specs, and test documentation * Experience supporting audits, quality reviews, and document traceability * Excellent communication, collaboration, and documentation skills * Flexibility to work off-shifts or changing schedules based on production needs This is more than a support role-this is your opportunity to help shape the quality and reliability of the systems that carry our mission beyond Earth.Join our team and make your mark on the future of spaceflight. Minimum Qualifications Qualifications/Requirements * 5-10 years Engineering experience with data collection * Knowledge and ability to understand and interpret technical data * Understanding of how to a define coordinate systems and redefine data into a different coordinate system. * Skill and ability to collect, organize, synthesize, and analyze data; summarize fundings; develop conclusions and recommendations from appropriate data sources * Familiarity with associated validation software for comparative analysis. Ability to document and report on results and address discrepancies. * Experience with the application of geometric dimensioning & tolerancing (GD&T) per ASME YI4.5. * Knowledge of measurement systems (e.g., photogrammetry, coordinate measuring machines, laser tracker, laser radar, laser alignment, portable measurement tools). * Ability to review and gather required information from 3D CAD models and 2D drawings. * Must have experience writing process plans and data reports. * Occasional overtime may be required. * Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays * Bachelors degree in Engineering preferred * Prior Aerospace experience preferred * Ability to obtain access to NASA facilities * Must be able to pass drug test * Must be US citizen for government clearance or contract compliance * This job is expected to be 100% onsite. The selected candidate will be required to work onsite at Michoud Assembly Facility in New Orleans, LA. Desired Qualifications Desired technical skills to satisfactorily perform the above tasking would require: * Degree preferred but not required. * Past experience on SLS, External Tank, Delta, Atlas, etc. desired * Previous experience with Spatial Analyzer and PRO-E/Creo Parametric software * Experience scripting laser inspection sequences within the Spatial Analyzer software, including the import of CAD models & definition of the appropriate axis system per GD&T requirements. * Use of Leica laser tracker equipment About Sev1Tech LLC Welcome to Sev1Tech! Founded in 2010, we are proud to be a leading provider of IT modernization, engineering, and program management solutions. Our commitment is to deliver exceptional program and IT support services that empower critical missions for both Federal and Commercial clients. At Sev1Tech, our mission is clear: Build better companies. Enable better government. Protect our nation. Build better humans across the country. We believe that through innovation and dedication, we can make a significant impact on the communities we serve. Join the Sev1Tech family, where your potential for greatness is limitless! Here, you will not only achieve remarkable accomplishments but also enjoy a fulfilling and rewarding career progression. We invite you to explore opportunities with us and become part of a team that values your contributions and growth. Ready to take the next step? Apply directly through our website: Sev1Tech Careers and use the hashtag #join Sev1Tech to connect with us on social media! For any additional questions or to submit referrals, feel free to reach out to ***********************.

The Combustion HTT Technician operates a furnace or direct fired heater in response to the client's request. A combustion technician safely and efficiently operates the equipment to maintain the desired output. The combustion process within the confines of the desired area must be controlled while the combustion equipment output changes in response to load demands. Technician set up shall meet basic requirements of combustion control to meet the requirements regulating the quantities of fuel and air while achieving optimum combustion and maintaining safe conditions for operators and equipment. Furnace and remote field setup designs vary as to the function, heating duty, type of fuel and method of introducing combustion air. The technician sets up the furnace, or the confines of the desired area, to create the desired amount of heat in accordance with the proper procedure. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values and 7 Critical Choices. * Gathers materials required to fill work orders. * Sets up the machine, and positions work pieces for processing. * Makes necessary adjustments and removes scraps from machine. * Maintains raw material inventory. * Conducts job walks with certified technicians and communicates requirements. * Interfaces with clients and co-workers. * Ensures jobs are completed in a timely manner and according to schedule. * Instructs Assistant Technicians on the proper set-up/tear-down of equipment; how to perform routine and preventive maintenance tasks. * Completes calibrations and overall equipment and facilities maintenance. * Oversees project execution and daily tasks associated with providing industrial maintenance services. * Completes proper documentation and reports of services provided. * Learns and abides by combustion procedures. Job Qualifications * High school diploma or equivalent. * Must possess valid Driver's License. * Previous experience in relevant industry preferred. * Travel Requirements: 25% - 50% Work Conditions * Field duties require indoor and outdoor work in a plant atmosphere and be able to tolerate climate changes. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and may be required to travel out of town. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb to perform duties. * Sufficient clarity of speech and hearing or other communication capabilities to communicate effectively. * Ability to maintain focus and multitask effectively. * Must be able to wear safety equipment as required by the safety department for personal protection. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

PRIMARY DUTIES & RESPONSIBILITIES Operate under minimal supervision to produce high-quality parts using various machines, including but not limited to CNC lathes and milling machines Perform setup, operation, and inspection of parts to ensure conformance to specifications, maintaining close tolerances and optimal efficiency Study and interpret engineering drawings, manuals, specifications, and sample parts to determine dimensions, tolerances, sequence of operations, and setup requirements Measure and mark dimensions and reference points on materials or workpieces to guide machining operations Detect equipment malfunctions or out-of-tolerance conditions and make necessary machine adjustments within capability to maintain quality standards; promptly report malfunctions to supervision Assist in solving complex manufacturing challenges and participate in cost reduction and continuous improvement projects Safely operate forklifts and other lifting devices to move parts and materials as required Communicate effectively with supervisors, engineers, production control, quality assurance, and other personnel to coordinate assignments and resolve machining or quality issues Maintain equipment and work area cleanliness; perform routine preventive maintenance Ensure compliance with all company health, safety, and environmental regulations Perform additional duties as assigned by the supervisor EDUCATION & EXPERIENCE QUALIFICATIONS Education: High school diploma or General Education Degree (GED) required Experience: 2-3 years of hands-on experience operating CNC machinery, including lathes and milling machines, within a heavy manufacturing environment Technical Knowledge: Advanced ability to read and interpret engineering drawings and specifications, with a strong understanding of geometric dimensioning and tolerancing (GD&T) Mathematical Skills: Proficient in basic and applied mathematics, including addition, subtraction, multiplication, division, geometry, and algebra, for material fabrication and dimensional calculations PHYSICAL/NON-PHYSICAL REQUIREMENTS While performing the duties of this position, the employee is regularly required to stand, use hands to handle or feel objects, tools, or controls, and communicate effectively through speech and hearing The employee is occasionally required to walk, reach with hands and arms, stoop, kneel, crouch, or crawl The employee must be able to lift and/or move up to 50 pounds on occasion Vision requirements include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus While performing job duties, the employee may be occasionally exposed to moving mechanical parts and industrial vehicles The noise level in the work environment is typically moderate Competitive Benefits (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest Competitive medical plans that cover your entire family (yourself, eligible spouse, and eligible children) as of your first date of hire for as little as $142 per pay period (bi-weekly) Employees and their spouse enrolled in a medical plan can receive up to $350 (pre-tax) each per year for participating in Choose Well-being Rewards FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician) FREE Basic Life and AD&D insurance (for full-time employees) All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date) All regular full-time employees receive up to 11 paid holidays per year

GENERAL DESCRIPTION: Perform machine operations on CNC or manual engine lathe. Tasks such as profiling, sub-blanking, coupling turning and threading. Second level in CNC Machinist training requiring close supervision. Ability to set up and thread VAM TOP Family threads and API threads, pin and boxes. Accurately measure, and record product tolerances required for Pre-Level CNC 1, VAM Top family, and API threads. Comprehend Original Equipment Manufacturer, Vallourec Tube-Alloy drawings and Manufacturing Orders. Maintain product traceability throughout the manufacturing process, including product marking per SOP, TSLI, and Licensor requirements. Follow Vallourec Tube Alloy HS&E safety standards, policies and understand the Risk Assessments pertaining to machine operations. Perform machine maintenance per SOP, TSLI, and Autonomous Maintenance requirements. Capable of making required molds for VAM Top family of threads. Maintain 5S standards. Maintain operator measured Efficiencies and Utilization requirements. Participate in at least one Continuous Improvement Event. Must have successfully completed all classroom, SOP, and TSLI related training for CNC 1. Perform other duties as assigned. REPORTS TO: Department Manager/Supervisor/Lead Person as applicable per facility QUALIFICATIONS: Must meet requirements for Pre-CNC 1. EDUCATION: High School Degree or GED required. Must be able to read, write, and verbally communicate in English. EXPERIENCE: Meet qualifications for Machinist - Manual I or prior CNC experience. SPECIAL SKILLS: Good mechanical aptitude and must meet Pre-CNC 1 requirements. Good mathematical background and can calculate rework pull-back for hooked threads, calculating angles, and turning speeds. Ability to safely operate a jib crane to load and unload product.

Job Description GENERAL DESCRIPTION: Perform machine operations on CNC or manual engine lathe. Tasks such as profiling, sub-blanking, coupling turning and threading. Second level in CNC Machinist training requiring close supervision. DUTIES: Ability to set up and thread VAM TOP Family threads and API threads, pin and boxes. Accurately measure, and record product tolerances required for Pre-Level CNC 1, VAM Top family, and API threads. Comprehend Original Equipment Manufacturer, Vallourec Tube-Alloy drawings and Manufacturing Orders. Maintain product traceability throughout the manufacturing process, including product marking per SOP, TSLI, and Licensor requirements. Follow Vallourec Tube Alloy HS&E safety standards, policies and understand the Risk Assessments pertaining to machine operations. Perform machine maintenance per SOP, TSLI, and Autonomous Maintenance requirements. Capable of making required molds for VAM Top family of threads. Maintain 5S standards. Maintain operator measured Efficiencies and Utilization requirements. Participate in at least one Continuous Improvement Event. Must have successfully completed all classroom, SOP, and TSLI related training for CNC 1. Perform other duties as assigned. REPORTS TO: Department Manager/Supervisor/Lead Person as applicable per facility QUALIFICATIONS: Must meet requirements for Pre-CNC 1. EDUCATION: High School Degree or GED required. Must be able to read, write, and verbally communicate in English. EXPERIENCE: Meet qualifications for Machinist - Manual I or prior CNC experience. SPECIAL SKILLS: Good mechanical aptitude and must meet Pre-CNC 1 requirements. Good mathematical background and can calculate rework pull-back for hooked threads, calculating angles, and turning speeds. Ability to safely operate a jib crane to load and unload product.

Our client, an industrial equipment manufacturer in the Greater New Orleans area, is hiring a CNC Sheet Metal and Press Brake Programmer to join their team. This full-time role focuses on creating and optimizing programs for Trumpf laser cutting and press brake machinery using TruTops Boost software. The position involves improving production efficiency, collaborating with engineering and production teams, troubleshooting, and maintaining accurate documentation. The company offers a comprehensive benefits package including insurance, 401(k) with match, PTO, and professional growth opportunities. Key Responsibilities Develop and optimize nesting programs for laser cutting and press brake operations. Use Trumpf TruTops Boost for accurate sheet metal bending and forming. Troubleshoot programming/machine issues and support equipment maintenance. Maintain programming records and pursue continuous improvement initiatives. Qualifications High school diploma required and technical degree or certification highly preferred 3+ years' experience in sheet metal programming, particularly with Trumpf equipment. Proficient in TruTops Boost, reading technical drawings, and understanding sheet metal fabrication. Strong problem-solving, communication, and multitasking skills. Preferred Qualifications Experience with CAD/CAM software (AutoCAD, SolidWorks, Creo), Trumpf TruStore, lean manufacturing, and similar CNC equipment.

Temp We are currently seeking recent graduates or individuals early in their careers who are ready to launch into the world of precision machining as CNC Machinists/Operators. This is an excellent opportunity to gain hands on experience, work with advanced machinery, and build a strong foundation for a long term career. Responsibilities: Set up, operate, and maintain CNC machines to produce high quality parts according to specifications. Interpret blueprints, technical drawings, and schematics. Perform basic programming adjustments and troubleshooting when needed. Monitor production to ensure accuracy and quality standards are met. Follow all safety procedures and maintain a clean, organized work area. Collaborate with team members and supervisors to ensure smooth production flow. Qualifications: Recent graduate from a CNC, machining, or manufacturing technology program. Basic understanding of CNC equipment and programming (Haas, Mazak, or similar). Strong attention to detail and a commitment to producing quality work. Mechanical aptitude and problem solving skills. Willingness to learn and grow in a fast paced environment. Why Work With Us: Hands on training and mentorship. Competitive pay with growth potential. Opportunity to gain experience with top regional employers. Locally owned company with personalized support and guidance. Benefits and long term career opportunities. Job Type: Full time

CNC Operator (Entry Level) Independence, Louisiana: Flexicrew Technical Services (FTS) is seeking an entry-level CNC Operator to join a leading manufacturing team. This is a full-time opportunity ideal for individuals beginning their career in CNC machining who are eager to grow their skills in a supportive, hands-on environment. Essential Duties: • Set up and operate CNC machines such as mills, lathes, or routers • Interpret and understand blueprints, schematics, and technical drawings • Load raw materials and tooling into machines with accurate alignment and calibration • Perform routine inspections, measurements, and quality checks using precision tools (e.g., calipers, micrometers, gauges) • Monitor machining processes and make necessary adjustments to maintain product quality • Conduct basic machine maintenance and troubleshoot minor mechanical issues • Maintain a clean, safe, and organized work environment in compliance with company safety policies • Accurately document production data and maintain job-related paperwork Requirements/Skills: • Minimum of 1 year of experience operating CNC machinery preferred, but recent training or vocational school graduates are encouraged to apply • Ability to read and interpret technical drawings and blueprints • Strong attention to detail and mechanical aptitude • Eagerness to learn and develop CNC skills in a hands-on environment • Willingness to work Monday - Friday, 8-10-hour shifts, with overtime as needed • Strong problem-solving and communication skills Physical Requirements: • Ability to lift up to 50 lbs regularly • Stand, walk, and perform repetitive tasks for extended periods • Manual dexterity and visual acuity to operate precision equipment Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Uses blueprints, sketches, or computer-aided design (CAD) and manufacturing files to produce precision metal parts. Set up different types of equipment that are controlled by computers for their work in order to accomplish goals with accuracy while also maintaining high levels of production rates. Operates and maintains lathe and milling machines. Reviews drawings, instructions, blueprints or samples to ensure accurate production. Takes precise measurements for cutting or threading. Selects appropriate machine and settings for a given task. Plans proper sequence of tasks to complete the assignment. Maintains good housekeeping skills of the work area daily. May be assigned to assist in other work areas as job demands dictate. May perform simple adjustments and/or repairs to equipment within a work area as directed. Job Requirements Heavy work classification. Exerting 50 lbs. frequently and/or occasionally and perform repetitive task. Long periods of sitting, standing, stooping, bending, kneeling and reaching. Push / Pull while exerting manual force. Works with moving equipment. Repetitive motions and manual handling of material. Works at a rapid, but efficient safe pace. Education High School Diploma or GED Experience Excellent coordination and mechanical skills. Strong attention to detail, accuracy, and safety. Solid written and verbal communication skills. Proficient in math. Basic computer skills. Completion of Core Employee Safety Orientation, and other training as identified on SSI Employee Training Matrix.

As a Machine Operator for H&S, you'll produce large industrial gears and gear parts while ensuring those products meet precise specifications using appropriate measurement tools and devices. This position is responsible for setting up and operating Boring Mills, Lathes, and Grinding Machines to machine industrial gearing parts to specific tolerances. The operator is responsible for operating controls, setting offsets, editing programs, some deburring, and performing self-inspection of parts in-process and upon completion for conformance to requirements. The Operator will also use large overhead cranes and other large equipment. Primary responsibilities: Operate machine tools such as lathes, milling machines, and grinders to produce metal parts. Review electronic or written blueprints or specifications for a job. Calculate where to cut or bore. Shape steel, aluminum, titanium, plastic, silicon and other materials. Determine how fast or slow work piece is fed into machine. Determine how much material to remove. Select tools and materials for the job. Plan the sequence of cutting and finishing operations. Mark the work piece to show where cuts should be made. Position work piece on the drill press, lathe, or milling machine. Monitor and control feed rate and speed. Ensure work piece is properly lubricated and/or cooled. Regulate temperature of work piece. Detect problems by listening for specific sounds. Adjust cutting speed to compensate for harmonic vibrations. Monitor the accuracy of cuts. Replace dull cutting tools. Check accuracy of work against blueprints and specifications. Produce large quantities of parts. Determine how automated equipment will cut a part. Determine cutting path. Concert path, speed, and feed information into set of instructions for machine tool. Use manual and computer-controlled machinery. Qualifications and Experience Minimum of five years' experience using Boring Mills, Lathes, and Grinders, and proficiency with large-part machining and blueprint reading; with the understanding of geometric tolerancing and dimensioning. Must be able to perform own setups, measure parts that consistently result in precision quality parts. Large overhead crane experience and move large work pieces. Strong shop mathematics (trigonometry) aptitude and the ability to use precision measuring instruments (calipers, mics and other gauges). Must have the ability to use a feed and speed chart or calculator to determine appropriate feeds, speeds, and depths of cut. Understanding of metal properties and appropriate cutting tools. Positive attitude required; dependable, self-starter and the willingness to help others. Ability to work in a large manufacturing environment and performs well with minimal supervision. Must be able to perform the essential functions of the job with or without accommodation.

Join Our Team at Unite Contracting in Belle Chasse, LA! Are you a skilled individual with experience in managing and maintaining tools and equipment? We are currently seeking a dedicated Tool Room Technician to join our team at Unite Contracting in Norco, LA. Key Responsibilities: Manage inventory and organization of tools in the tool room Issue tools and equipment to employees as needed Inspect tools for proper functioning and perform routine maintenance Keep detailed records of tool usage and maintenance history Communicate with the Tool Room Clerk to order new tools and supplies as needed We are looking for a proactive, detail-oriented individual who is passionate about ensuring that our team has the tools it needs to succeed. As a Tool Room Technician, you will play a crucial role in the efficiency and productivity of our operations. Qualifications: Prior experience in a similar role is preferred Strong organizational and time management skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Knowledge of various tools and equipment About Us: Unite Contracting is a leading provider of construction and maintenance services in Norco, LA. With over 20 years of experience, we pride ourselves on delivering high-quality work and exceptional customer service to clients in various industries. Our team is comprised of dedicated professionals who are committed to excellence and innovation in everything we do. Join us and be a part of our success!

Job DescriptionJoin Our Team at Unite Contracting in Belle Chasse, LA! Are you a skilled individual with experience in managing and maintaining tools and equipment? We are currently seeking a dedicated Tool Room Technician to join our team at Unite Contracting in Norco, LA. Key Responsibilities: Manage inventory and organization of tools in the tool room Issue tools and equipment to employees as needed Inspect tools for proper functioning and perform routine maintenance Keep detailed records of tool usage and maintenance history Communicate with the Tool Room Clerk to order new tools and supplies as needed We are looking for a proactive, detail-oriented individual who is passionate about ensuring that our team has the tools it needs to succeed. As a Tool Room Technician, you will play a crucial role in the efficiency and productivity of our operations. Qualifications: Prior experience in a similar role is preferred Strong organizational and time management skills Ability to work independently and as part of a team Excellent communication and problem-solving skills Knowledge of various tools and equipment About Us: Unite Contracting is a leading provider of construction and maintenance services in Norco, LA. With over 20 years of experience, we pride ourselves on delivering high-quality work and exceptional customer service to clients in various industries. Our team is comprised of dedicated professionals who are committed to excellence and innovation in everything we do. Join us and be a part of our success! #hc189498

CNC Machinist $1,600+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must have CNC machining experience Proficient in CNC programming using Fusion 360, CAD, CAM. Experience with 4-Axis Mills and 3-Axis Lathes. Ability to read and interpret blueprints and technical drawings. Strong understanding of machining principles, tooling, and materials. Excellent attention to detail and precision. Good problem-solving and troubleshooting skills. Ability to lift heavy materials and stand for extended periods. Preferred: Previous experience in a valve manufacturing or industrial machining environment. Shifts: Monday - Friday 6:30 AM - 5:00 PM Overtime Opportunity Duration: Temporary to Permanent How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at ************ Job ID# 50532953

Job DescriptionCNC Machinist $1,600+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must have CNC machining experience Proficient in CNC programming using Fusion 360, CAD, CAM. Experience with 4-Axis Mills and 3-Axis Lathes. Ability to read and interpret blueprints and technical drawings. Strong understanding of machining principles, tooling, and materials. Excellent attention to detail and precision. Good problem-solving and troubleshooting skills. Ability to lift heavy materials and stand for extended periods. Preferred: Previous experience in a valve manufacturing or industrial machining environment. Shifts: Monday - Friday 6:30 AM - 5:00 PM Overtime Opportunity Duration: Temporary to Permanent How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at 225-930-0685 Job ID# 50532953

Full-time Description Atalco Gramercy Operations is the leading producer of Alumina in the United States. Our Gramercy refinery produces 1.2 million tons a year of smelter grade alumina (SGA) for the production of aluminum as well as chemical grade alumina (CGA) which is used in a wide array of industrial applications. We are currently seeking 2 Machinists for our Gramercy, LA refinery. Job Summary/Objective This role is responsible for setting up and performing various types of machining on any type of rough or finished stocks or parts. Essential Functions / Qualities / Skills Reads and interpret blueprints, charts, and sketches. Know shop mathematics and can thoroughly plan own work. Set up and operate machines to fabricate or repair parts within close tolerances. Fabricate and fits all types of journal bearings, couplings, etc. Does bench and floor work. Knows thoroughly the working properties of the materials handled. Operates and directs the operation of weight-lifting devices in moving heavy material or equipment to and from the work area. Dismantles inspects for sources of trouble, repairs, and reassembles all types of machinery and equipment in the plant as required. Education/Training Requirements Highschool diploma or equivalent Must have at least 3 years of craft experience in a craft environment. Hands of craft testing will be a required portion of the application process.