Numerical control operator jobs in Raleigh, NC - 56 jobs

Job Description Transform the everyday - one precision bend at a time Join Siemens in Wendell, NC and help the Electrification & Automation (E&A) Business Unit deliver dependable power distribution today while innovating for Future Grids. Your craft on a Trumpf press brake turns designs into reality. Your impact Own the setup and operation of a Trumpf press brake to form steel, aluminum, galvanized, and copper parts to drawing specs. Load, configure, and run offline bend programs; select/change tooling for optimal forming. Decode 2D/3D blueprints; apply shop math to calculate bend allowances/deductions and tonnage. Document confirmations in our manufacturing data system and follow Quality/Safety documents, Operating Instructions, production sequences, and part drawings. Maintain equipment and workspace for safe, reliable performance; collaborate with a Group Lead/Supervisor. Growth & support Start on 1st shift for training at the manager's discretion, then move to 3rd shift. Work within a global, diverse team that supports development and new challenges. Schedule & compensation 3rd shift: 11:00 PM - 7:30AM (ET) Hourly: $24.79 plus $1.50 shift differential What you'll need 1+ year of press brake setup/operation with experience selecting and changing tooling. Deep understanding of flat pattern layout, bend deductions/allowances, and tonnage calculations. Proven ability to analyze and solve forming issues independently. Comfort with shop math, digital systems, and basic mechanical/measuring tools. Read, write, speak, and comprehend English; able to stand for the duration of the shift and to stoop, bend, squat, crawl, and climb. Able to reach, grasp, lift up to 50 lbs, and push/pull/slide material. Preferred: High School diploma or equivalent. Technical proficiencies & tools Mechanical Troubleshooting Skills Tape Measure Reading Blueprint Reading Machine: Press Brake (Trumpf) About Siemens We are a global technology company focused on industry, infrastructure, transport, and healthcare. From resource‑efficient factories and resilient supply chains to smarter buildings and grids, to sustainable transportation and advanced healthcare, we create technology with purpose. Learn more about Siemens here. Inclusion & compliance Our Commitment to Equity and Inclusion in our Diverse Global Workforce: We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us. Must be able to reach, grasp, lift 50lbs, and push/pull/slide material; legally authorized to work in the United States on a continual and permanent basis without company sponsorship.

Job Description About Company: What Does Prolec GE Waukesha Do? To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. PRINCIPLE DUTIES AND RESPONSIBILITIES Interprets and understand simple and complex part drawings. Uses precision measuring tools such as micrometers, Vernier's, scales, protractors, compass, height gage, dial indicators, etc. Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts. Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment. Performs normal operator maintenance as prescribed by equipment builder to include the replacement of consumable materials and parts. Performs multiple activities simultaneously, organizes work, and takes corrective action in response to error messages and/or process interruptions. Assists with supervision in the training of other machine operators and helpers. Diagnoses machine problems and repair of the machines. Assumes leadership role and takes responsibility for overall performance of equipment. Meets production standards by monitoring machine performance to include managing up time and quality standards. Use of punch dies and pressures used in the hydraulic forming of steel and alloys. Very proficient at performing oxy/fuel flame and plasma cutting, part layout, inspection, hole drilling, tapping and milling to include an understanding of speed and feed rates. Reads, understands, and follows guidelines set forth by E.I.s, M.P.s, S.P.s, O.I.C.s, and blueprints when performing assigned work. Comply with all safety policies and procedures and actively participate in defined zero harm safety culture driven initiatives. KNOWLEDGE, SKILLS & ABILITIES TOOLS AND MACHINERY CNC machines such as saws, press brake, manual mills, plasma cutter and CNC Flex machine. Tools include micrometers, Vernier's, scales, protractors, compass, height gage, dial indicator, tape measure, go-no-go gauges and squares. MATERIALS Personal protective equipment to include safety glasses, steel toed shoes, hearing protection, welding apron, face shield, and appropriate gloves. GENERAL Works under minimal supervision. Must be a self-starter with excellent problem solving and decision making skills. Acts decisively with a sense of urgency to maximize machine production and minimize down time. Strong knowledge of mathematics, to include geometry, to determine unknown part dimensions and/or relationships. Knowledge of metal types and characteristics. Understanding of the part use, fit and function as well as the manufacturing processes utilized is essential. Experience working with computers and machine controls. EDUCATION AND EXPERIENCE High school diploma or G.E.D. equivalent ADDITIONAL INFORMATION The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous, incidental, or substantially similar duties, which may be assigned during normal or emergency operations. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

Job Title: Amada CNC Turret Operator Job Type: Full-time Location: Oxford, NC Company Overview: H3 Manufacturing is a leading integrated manufacturing solutions provider specializing in precision machining, laser cutting, sheet metal fabrication, complex welding, assembly, surface finishing, painting, and powder coating. With four state-of-the-art facilities spanning 225,000 square feet with locations in Illinois and North Carolina, we serve high-spec markets including power generation, healthcare, electrical power distribution, aerospace and defense, life sciences, and more. We're looking for a CNC Turret Operator to join our precision metal fabrication team on second shift. This position is responsible for setting up and operating CNC turret punch presses (Amada or similar) to produce high-quality sheet metal components. If you're motivated, detail-oriented, and take pride in turning flat sheet into precision parts, you'll fit right in. Responsibilities: Set up and operate CNC turret punch presses according to production schedules and part specifications. Load and unload sheet metal, ensuring proper alignment and material handling. Interpret blueprints, drawings, and job travelers. Verify part dimensions and quality using precision measuring tools (calipers, micrometers, gauges). Make machine adjustments and tool changes as required. Inspect first-piece and in-process parts to maintain tight tolerances. Perform basic maintenance and keep machines clean and in good working order. Communicate issues or improvement ideas to the production supervisor. Maintain a safe and organized workspace. machine operation for proper forming and quality control. Work with team members to meet production goals and deadlines. Maintain a clean, organized, and safe work environment. Required Qualifications: Education & Experience: High school diploma or GED required. Minimum of 2 years' experience in sheet metal fabrication or a related trade preferred. Experience operating Amada or similar fabrication machinery a plus. Skills & Competencies: 1-2 years of CNC turret punch experience (Amada preferred). Ability to read blueprints and understand fabrication tolerances. Familiarity with sheet metal types, gauges, and layouts. Strong mechanical aptitude and problem-solving skills. Able to lift up to 50 lbs and stand for extended periods. Reliable attendance and strong attention to detail required. Work Environment: Manufacturing floor environment with exposure to moderate noise, dust, and moving machinery. Must adhere to all PPE and safety requirements. Hours typically run from 4:00 PM - 2:30 AM, Monday through Thursday. Physical Requirements: Ability to stand for extended periods. Lift up to 50 lbs occasionally. Frequent bending, stooping, and reaching. Benefits: Retirement plan 401(k) with 401(k) match Healthcare, Dental & Vision insurance Flexible spending account or Health savings account option Life insurance Paid time off Parental leave Professional development assistance Referral program ~~~~~~~~~~~~~~~~~~~~~~~~~~~ This position requires ITAR compliance and may involve access to technical data controlled under the International Traffic in Arms Regulations (ITAR). Sponsorship is not available now nor in the future. Applicants must be U.S. Persons as defined by ITAR. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ H3 Manufacturing Group, LLC is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should email *****************.

Join the Leader in Trading Card Manufacturing At Millennium Print Group (MPG), a proud subsidiary of The Pokémon Company International, we're on a mission to be the world's leading manufacturer of trading card games and collectibles. Based in North Carolina's vibrant Research Triangle Park and Piedmont Triad regions, we're at the heart of innovation in this fast-growing industry. Since our founding in 2014, our dedicated team has built a world-class operation known for exceptional quality, customer focus, and market agility. Specializing in trading and collectible cards, we offer a unique range of services that set us apart. Our commitment to excellence has fueled rapid growth - we've nearly tripled in size since 2019 - and we're just getting started. Come be part of a forward-thinking, high-performing team that's shaping the future of collectible printing. At MPG, your work makes an impact. Click here to review our Privacy Notice for applicants. Click here to review our applicant Privacy Notice for SMS Texting and Terms of Service. Post-Press Machine Operator Talent Pool Location: Raleigh, NC | Morrisville, NC | Durham, NC Shift: Multiple shifts available (12-hour shifts - Days: 7am - 7pm or Nights: 7pm - 7am) Shift Details: This position follows a rotating 2-2-3-2 schedule: work 2 days, off 2 days, work 3 days, off 2 days, work 2 days, off 3 days, then repeat. You will be placed on a designated day or night shift (not swing). A minimum of 4-6 weeks of day-shift training (Monday-Friday, 8-hour schedule) is required before moving into the rotation. About the talent pool Our Post-Press team is growing, and we're always interested in connecting with skilled machine operators! By joining this talent pool, you'll be considered for upcoming opportunities on our finishing lines, including overwraps, slitters, die cutters, and other high-speed equipment. As a Post-Press Machine Operator at Millennium Print Group, you'll help produce millions of trading cards and specialty products each week, ensuring quality, precision, and efficiency. What does a Post-Press Machine Operator do? Set up, operate, and monitor post-press machinery and equipment including, but not limited to: die cutters, cutters, overwrap, and slitting machines. Inspect finished products to ensure accuracy, quality, and consistency. Perform basic equipment adjustments and troubleshoot mechanical issues. Maintain a clean and safe work environment. Work closely with team members and shift leads to meet production targets. What are the basic qualifications? High school diploma or equivalent required. Minimum of 2-3 years' experience operating manufacturing machines, troubleshooting, and working as a lead machine operator in a fast-paced manufacturing environment (printing, packaging, and large-scale manufacturing industries preferred). Strong attention to detail and commitment to quality. Mechanical aptitude and comfort with hands-on machine operation in a manufacturing setting. Ability to stand, bend, and lift up to 50 lbs. for up to a 12-hour work shift (2-2-3-2 shift rotation). Willingness to learn and grow within a fast-paced production environment. What to Expect MPG offers a leading-edge compensation package which includes the following: A highly competitive compensation "above the industry" commensurate with experience which includes an annual incentive bonus plan 100% Employer-paid medical, dental base plan, vision, life/AD&D, and short-term and long-term disability, while subsidizing premiums for medical, dental, and vision for employee dependents 401(k) Plan with up to a 6% (dollar for dollar) Employer match Health Savings/Flexible Spending Account options Paid time off, including 10 company-paid holidays, plus 1 floating holiday Employee Assistance Program Comprehensive relocation package available for qualified candidates And, much more! Millennium Print Group is an Equal Opportunity Employer The duties and responsibilities described above are essential functions of the job. The following qualifications are representative of the knowledge, skills, and or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

Job Description Your mission Engineer smarter, leaner, and more efficient CNC-driven production for next-generation driveline components. You will bridge design and manufacturing, ensuring parts are producible at quality, cost, and speed-right from launch. Why this matters GKN Automotive advances mobility for over 90% of the world's car manufacturers. Your work will underpin reliable, scalable machining processes that keep vehicles moving worldwide. Scope of work Develop and improve manufacturing systems, equipment, and tooling for CNC operations Lead FTF (First Time Through) measurement strategy and compile PPAP packages Collaborate with design to elevate manufacturability and reduce total landed cost Direct inspections, apply structured problem solving, and recommend engineering changes Mine production data to drive waste reduction, cycle-time gains, and process capability Run small projects with tight control of schedule, cost, and scope; align suppliers/subcontractors Embed safety, health, and environmental compliance into every improvement Elevate the team through coaching and knowledge sharing Qualifications Bachelor's degree in Engineering (or equivalent) 5-6 years of manufacturing/process engineering experience Demonstrated experience in process/equipment design, development, and specification Competence in project scheduling, costing, and budgeting Preferred background Hands-on CNC machining process experience Lean manufacturing and organizational change management Data analysis and process optimization expertise Supplier and subcontractor coordination Your toolbox GD&T Project Management 5 Why (root cause analysis) APQP and PPAP Mechanical Design & Engineering Lean Manufacturing Principles Experience operating within a manufacturing environment How we work Ingenuity: We decide smartly and improve relentlessly Collaboration: We build relationships and share knowledge Principled Leadership: We act with integrity and own outcomes Drive: We innovate with focus and deliver results About GKN Automotive We lead the world in driveline systems, partnering with the majority of global automakers to push the boundaries of mobility through cutting-edge technology and smart engineering.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. ********************************************************************************************** Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. We have a brand-new state-of-the-art facility which includes new equipment, a cafeteria, onsite fitness gym, golf simulator, outdoor tennis court, basketball court, and pickleball court. Your schedule will be Monday-Friday 3:30 PM - midnight, with overtime on a business need basis. Compensation • $1,500 Sign on Bonus* • 10% shift differential for 2nd shift • Eligible for Annual Increases • Competitive Benefits Package, including first day Medical Benefits What You Will Do • Responsible for the set-up, calibration, and operation of machines used in production processes. • Work from verbal or written instructions, diagrams, or models. • Inspect machining operations and finished products against specified tolerances using precision measuring tools. • Perform routine maintenance and cleaning. • Set up and operate a CNC production machine in accordance with established procedures and guidelines. • Use computer-controlled equipment to select, position and secure automatic or semi-automatic machines. • Control and adjust machine settings to complete routine tasks according to specifications. • Make calculations and assist with numeric controlled programming. Qualifications You Must Have • Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline with a minimum of 1 year of relevant experience Qualifications We Prefer •Completion of CNC Machine Operating technical school program. •1 year machine operator experience What We Offer Some of our competitive benefits package includes: • Medical, dental, and vision insurance • Three weeks of vacation for newly hired employees • Generous 401(k) plan that includes employer matching funds • Tuition reimbursement program • Student loan repayment program • Life insurance and disability coverage • Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection • Birth, adoption, parental leave benefits • Ovia Health, fertility, and family planning • Adoption assistance • Autism Benefit • Employee Assistance Plan, including up to 10 free counseling sessions • Healthy You Incentives, wellness rewards program • Doctor on Demand, virtual doctor visits • Bright Horizons, child and elder care services • Teledoc Medical Experts, second opinion program • And more! Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military, and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft, and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other - propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description Join a collaborative behavioral health team consisting of 4 Psychiatrists, 2 Advanced Practice Providers & an experienced support staff, all backed by a strong and motivated administrative team. This is a rewarding inpatient-only position with a balanced schedule and excellent resources to support your practice. Position Highlights Schedule: 7 days on / 7 days off Setting: 33-bed inpatient psychiatric center (20 adult beds, 13 geriatric beds) Caseload: Average 12-16 patients per day Responsibilities: Provide high-quality inpatient behavioral health services across adult & geriatric units Compensation & Benefits Competitive, generous base salary with productivity incentives Sign-on bonus and relocation assistance Paid vacation and CME allowance Comprehensive benefits package (medical, dental, vision, malpractice, retirement, etc.) Supportive work environment with long-term stability Community & Lifestyle Located in a family-friendly community serving 100,000 residents Excellent public and private school options Vibrant downtown with dining, cultural and recreational opportunities Convenient access to Raleigh and surrounding cities, making it easy to balance work and lifestyle For more details on this position and others we have, email us at ************************** or call **************.

NCDNCR has an URGENT/IMMEDIATE need for a PHP and Wordpress Developer to get their website up and running again. Candidates need to be available immediately for the duration of the engagement. There may be a small extension to complete the work, if needed. To support existing NC Museum of Natural Sciences (NCMNS) website: 1. Website Access Restoration: Diagnose and repair issues related to the missing WordPress login PHP file, restoring the login functionality for administrative and content management access. 2. Static Pages Restoration: Diagnose and repair issues related to the inability to make lives changes made to the static portions of the site. 3. Codebase Stabilization: Identify problematic custom PHP code, outdated plugins, and legacy configurations that contribute to website instability, applying fixes as necessary to support ongoing use. 4. Content Management Support: Make minor updates to improve navigation and usability where feasible, given the current structure, to facilitate better access for public users and ease of content management. 5. Short -Term Maintenance Recommendations: Provide guidance on maintaining the website's operability over the short term, including essential updates and monitoring for potential points of failure. 6. Documentation: Document any repairs, temporary fixes, or recommendations for the NCMNS team to maintain site functionality and address minor issues Requirements Extensive experience with PHP Development Experience with WordPress Development Experience reviewing existing code to diagnose and repair issues related to missing WordPress login PHP files Experience restoring the login functionality for administrative and content management access. Identify problematic custom PHP code, outdated plugins, and legacy configurations that contribute to website instability, applying fixes as necessary

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Parental leave Vision insurance Summary: Custom Cylinders, Inc. has been designing and manufacturing high quality, custom pneumatic and hydraulic cylinders since 1984. We are currently experiencing tremendous growth in demand from customers in several of the industries that we serve. This has created an immediate need for skilled CNC Machine Setup/Operators. Custom Cylinders, Inc. is seeking a CNC Setup/Operator to work with an experienced team in a dynamic and action-oriented Continuous Improvement environment. This position will be responsible for the setting up and operation of CNC mills and lathes to produce parts to print specifications. Machine types include Bridgeport, Haas, Hardinge, and Takisawa lathes and mills. An ideal candidate for this role should pay strong attention to detail, is committed to workplace safety, and maintains a constant quality mindset in all work. Having experience setting up and maintaining Swiss lathes and other multi turret, multi-spindle lathes would be a huge plus. Essential Functions/Job Responsibilities: Interpret engineering drawings to understand tolerances of the parts to be machined. Interpret setup documentation and tooling sheets to setup a variety of jobs. Setup and operate CNC multi-turret and multi spindle lathes to meet parts per hour requirements. Perform quality checks and make necessary adjustments to hold dimensions and tolerances. Makes necessary offset and program adjustments or requests program updates from programmer in order to hold dimensions and tolerances to print specifications. Takes proper care of all tools and equipment. Performs daily preventative maintenance. Maintain a clean and orderly work area. Education and/or Experience: High school diploma or GED. five years prior machining experience. Ability to read blueprints and to use and read precision measuring tools. Understanding of basic shop math including decimal/fraction conversion. Compensation: $40.00 - $50.00 per hour ABOUT CUSTOM CYLINDERS, INC. Established over 40 years ago by engineers, Custom Cylinders, Inc. specializes in the design and manufacturing of custom pneumatic and hydraulic cylinders and valves and continues to maintain its design-focused approach to addressing customer needs. In addition to custom cylinders, we can also provide fittings, valves, and other components, and are continually expanding our offerings to meet comprehensive customer needs. Custom Cylinders can service orders as small as a single cylinder or as large as 50,000 pieces per year. Our products are found in a wide variety of industries and applications including but not limited to food processing and packaging, medical devices, printing, automotive, material handling systems, and automation. Our size gives us the flexibility to take on projects and degrees of customization to meet customers' needs, and our in-house capabilities enable us to control the entire design and manufacturing process and maintain quality product development timelines and delivery. Mission and Vision Our mission is to be that trusted partner to our fluid power customers, solving their complex pneumatic and hydraulic challenges by delivering the delicate balance between performance, quality and cost. Founded by engineers, our design focused approach emphasizes designing and delivering solutions that solve problems and optimize costs.

The Mold Maker works with senior mold makers on new mold builds, repair Injection, EPP and Insert molds as directed, and continue to develop technical skills from senior mold makers and through external training programs. ESSENTIAL JOB FUNCTIONS Disassemble and assemble molds safely, efficiently, and without damage. Disassemble and assemble hot runner systems including wiring and multimeter testing. Accurately use and read Micrometers, Calipers and Gauges. Utilize basic MasterCam skills. Set-up, program, and operate CNC, manual mill, lathe, sinker EDM, and surface grinder as needed and in a safe, efficient, and proper manner to produce quality workmanship. Participate in continuous improvement efforts. Obtain work instruction from shop drawings, e-files, verbal instructions, and sketches. Perform assigned work with minimal supervision from manager or senior mold makers. Work with senior mold makers to repair Injection, EPP and Insert molds. Work with senior mold makers on new mold builds. Perform routine maintenance on shop equipment. Pursue ongoing training in related job skills. Keep work area and machines clean. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Use support software such as Word, Excel, and Outlook to communicate and document information. Provide technical expertise to team members with less experience. Provide training to other team members. Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum of 2 years' experience in mold making, mold repair and/or mold maintenance. Willing to train and develop mold making technical skills/knowledge. Demonstrate competence in shop math, adding, subtracting, understanding decimals and fractions. Demonstrate mechanical aptitude. Proficiently speak, read, and understand English. Must be a critical thinker, able to analyze and evaluate facts and circumstances that affect an issue. Must be able to clearly communicate information orally and in written form. PREFERRED QUALIFICATIONS High School diploma or equivalent. 3+ years' experience in mold making, mold repair and/or mold maintenance. Ability to conceptualize. Experience driving a forklift. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent walking, standing, simple and power grasping, lifting/carrying up to 50 lbs. Occasional sitting, bending at the neck and/or waist, squatting, climbing, kneeling, twisting at the neck and/or waist, repetitive use of hands, use of hands for fine manipulation, pushing and pulling above and below shoulder level. May require: Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes, or chemicals Working at heights Operation of foot controls or repetitive foot movement Use of special visual or auditory protective equipment PPE REQUIREMENTS Safety glasses Full leather upper, slip-resistant, safety toe shoes Hearing Protection Mold Maker CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Job DescriptionExperience:3 - 5 YearsLocation:MebaneMust Have:Minimum of 2 years experience in mold making, mold repair and/or mold maintenance. Willing to train and develop mold-making technical skills/knowledge. Demonstrate competence in shop math, adding, subtracting, understanding decimals and fractions. Demonstrate mechanical aptitude. Proficiently speak, read, and understand English. Must be a critical thinker, able to analyze and evaluate facts and circumstances that affect an issue. Must be able to clearly communicate information orally and in written form.Job Summary The Mold Maker I works closely with Senior Mold Makers to support new mold builds and perform repair and maintenance of Injection, EPP, and Insert molds. This role is ideal for an early-career mold maker who is eager to develop technical expertise through hands-on experience, mentorship, and external training programs. Key ResponsibilitiesMold Making Repair Assist senior mold makers with new mold builds and mold modifications. Disassemble and assemble molds safely, efficiently, and without damage. Disassemble and assemble hot runner systems, including wiring and multimeter testing. Repair and maintain Injection, EPP, and Insert molds under guidance. Perform routine maintenance on shop equipment. Machining Tooling Operations Set up, program, and operate CNC machines, manual mills, lathes, sinker EDMs, and surface grinders. Use MasterCam at a basic level for machining operations. Produce quality workmanship while following proper machining and safety procedures. Read and accurately use micrometers, calipers, and gauges. Technical Documentation Instructions Obtain and follow work instructions from shop drawings, electronic files, sketches, and verbal directions. Use support software such as Word, Excel, and Outlook for communication and documentation. Continuous Improvement Training Participate in continuous improvement initiatives. Pursue ongoing training to enhance mold making and machining skills. Share technical knowledge with less experienced team members when required. Support training of other team members as assigned. Safety, Quality Teamwork Follow all safety procedures, wear required PPE, and attend safety meetings. Maintain a clean, organized, and safe work area. Adhere to department quality standards and report concerns to management. Demonstrate company core values: Safety, Quality, Respect, and Service. Work effectively as part of a team, open to feedback, and respectful of others. Take ownership of work, communicate job status, and meet department KPIs. Maintain reliable attendance, punctuality, and dependability. Perform other duties as assigned. Work Schedule Flexibility Must be willing to work overtime and flexible schedules based on business needs. Required Qualifications Minimum 2 years of experience in mold making, mold repair, or mold maintenance. Willingness to learn and develop mold-making technical skills. Strong mechanical aptitude and problem-solving skills. Competence in shop math, including decimals and fractions. Ability to read, speak, and understand English. Ability to analyze situations and communicate information clearly, both verbally and in writing. Preferred Qualifications High school diploma or equivalent. 3+ years of experience in mold making, repair, or maintenance. Ability to conceptualize tooling and machining solutions. Forklift driving experience.

Piper Companies is seeking a Machinist to join a global leader in the pharmaceutical and life sciences industry for an onsite contract position (20-40 hours/week) located in Clayton, NC. The Machinist will support manufacturing operations by operating and maintaining precision machinery to ensure production quality and efficiency. Responsibilities of the Machinist include: * Operate and maintain CNC and manual machines to produce high-quality components. * Perform routine inspections and measurements to ensure compliance with specifications. * Troubleshoot and resolve mechanical issues to minimize downtime. * Collaborate with maintenance and engineering teams to optimize machine performance. * Adhere to all safety protocols and GMP standards within a regulated environment. Qualifications for the Machinist include: * Previous experience operating CNC and manual machining equipment. * Strong understanding of mechanical systems and machining processes. * Ability to read and interpret technical drawings and blueprints. * Familiarity with GMP and safety standards in a manufacturing setting. * High school diploma or equivalent; technical certification preferred. Compensation for the Machinist: * Salary Range: $70,000-$100,000/year (dependent upon experience) * Comprehensive Benefits: Medical (Cigna), Dental (Guardian), Vision (VSP), sick leave if required by law, and 401K (Voya through ADP) This job opens for applications on 01/09/26. Applications for this job will be accepted for at least 30 days from the posting date. Keywords: machinist, CNC, manual machining, GMP, pharmaceutical manufacturing, precision machining, mechanical troubleshooting, technical drawings, regulated environment, safety compliance, production support, maintenance collaboration. #LI-MB1 #LI-ONSITE

Broadwind Industrial Solutions is searching for a CNC Plate Processing Machinist to join our team in Sanford, NC. Do you have water jet, plasma or laser plate processing experience and are able to program? If so, this is the job for you!! The CNC Plate Processing Machinist programs and operates computer-controlled cutting equipment and may oversee a broader range of tools, including drills, mills, lathes, and other machinery. Blueprint reading and interpretation is critical! Key responsibilities: * Machine operation: Setting up, programming, and operating various CNC machine tools, including plasma and laser cutters, water jet, as well as mills, lathes, and punches. * Part fabrication: Building, modifying, or repairing parts from blueprints, samples, or drawings. * Programming: Interpreting CAD files and translating designs into machine code. * Preventative maintenance: Performing routine maintenance on all machinery to ensure proper function. * Quality inspection: Measuring and examining parts to verify they meet precise specifications and tolerances. * Record keeping: Documenting production data and noting any nonconformities. * Troubleshoot complex machining problems * Read and understand blueprints, engineering drawings, and machining print symbols. * Calculate dimensions and tolerances using knowledge of mathematics and instruments such as tape measure and calipers. * Keep a clean and orderly work area. Comply with all quality, safety, and work rules and regulations. * Safely operate forklift equipment and overhead crane. * All other duties as assigned. Academic/Experience/Credentials/Certifications: * High school diploma or equivalent. * Two-year technical degree in Machining or an equivalent amount of machinist experience. * 2 + years experience with multiple types of CNC plate processing equipment and tooling. * Programming experience required. Specialized Skills/Knowledge/Ability: * Advanced understanding of blueprints, engineering drawings, and preferred experience in geometric dimensions and tolerancing (GD&T). * Ability to troubleshoot and resolve complex machining problems. * Knowledge of various metal properties and machining techniques. * Ability to read and understand machining print symbols necessary. * Ability to safely operate overhead crane and forklift equipment. * Strong attention to detail.

Wakefield Solutions, Inca global leader in innovative thermal management . end-to-end thermal solutions with global engineering, global manufacturing, and global supply chain to meet today's thermal. Job Description This individual will be responsible for operating CNC Milling for production of precision metal parts. Will include calipers, micrometers and methods to measure a depth and hole diameter. Qualifications • Minimum of 2-3 years of CNC milling experience or a degree from an accredited machining technology school • Experience with precision measuring devices including calipers and gauges • Ability to work independently and perform repetitive tasks • Ability to stand for extended periods of time • Resume and 3 professional references required Additional Information All your information will be kept confidential according to EEO guidelines.

About Company: What Does Prolec GE Waukesha Do? To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. PRINCIPLE DUTIES AND RESPONSIBILITIES Interprets and understand simple and complex part drawings. Uses precision measuring tools such as micrometers, Vernier's, scales, protractors, compass, height gage, dial indicators, etc. Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts. Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment. Performs normal operator maintenance as prescribed by equipment builder to include the replacement of consumable materials and parts. Performs multiple activities simultaneously, organizes work, and takes corrective action in response to error messages and/or process interruptions. Assists with supervision in the training of other machine operators and helpers. Diagnoses machine problems and repair of the machines. Assumes leadership role and takes responsibility for overall performance of equipment. Meets production standards by monitoring machine performance to include managing up time and quality standards. Use of punch dies and pressures used in the hydraulic forming of steel and alloys. Very proficient at performing oxy/fuel flame and plasma cutting, part layout, inspection, hole drilling, tapping and milling to include an understanding of speed and feed rates. Reads, understands, and follows guidelines set forth by E.I.s, M.P.s, S.P.s, O.I.C.s, and blueprints when performing assigned work. Comply with all safety policies and procedures and actively participate in defined zero harm safety culture driven initiatives. KNOWLEDGE, SKILLS & ABILITIES TOOLS AND MACHINERY CNC machines such as saws, press brake, manual mills, plasma cutter and CNC Flex machine. Tools include micrometers, Vernier's, scales, protractors, compass, height gage, dial indicator, tape measure, go-no-go gauges and squares. MATERIALS Personal protective equipment to include safety glasses, steel toed shoes, hearing protection, welding apron, face shield, and appropriate gloves. GENERAL Works under minimal supervision. Must be a self-starter with excellent problem solving and decision making skills. Acts decisively with a sense of urgency to maximize machine production and minimize down time. Strong knowledge of mathematics, to include geometry, to determine unknown part dimensions and/or relationships. Knowledge of metal types and characteristics. Understanding of the part use, fit and function as well as the manufacturing processes utilized is essential. Experience working with computers and machine controls. EDUCATION AND EXPERIENCE High school diploma or G.E.D. equivalent ADDITIONAL INFORMATION The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous, incidental, or substantially similar duties, which may be assigned during normal or emergency operations. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. PRINCIPLE DUTIES AND RESPONSIBILITIES · Interprets and understand simple and complex part drawings. · Uses precision measuring tools such as micrometers, Vernier's, scales, protractors, compass, height gage, dial indicators, etc. · Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts. · Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment. · Performs normal operator maintenance as prescribed by equipment builder to include the replacement of consumable materials and parts. · Performs multiple activities simultaneously, organizes work, and takes corrective action in response to error messages and/or process interruptions. · Assists with supervision in the training of other machine operators and helpers. · Diagnoses machine problems and repair of the machines. · Assumes leadership role and takes responsibility for overall performance of equipment. · Meets production standards by monitoring machine performance to include managing up time and quality standards. Use of punch dies and pressures used in the hydraulic forming of steel and alloys. · Very proficient at performing oxy/fuel flame and plasma cutting, part layout, inspection, hole drilling, tapping and milling to include an understanding of speed and feed rates. · Reads, understands, and follows guidelines set forth by E.I.s, M.P.s, S.P.s, O.I.C.s, and blueprints when performing assigned work. · Comply with all safety policies and procedures and actively participate in defined zero harm safety culture driven initiatives. KNOWLEDGE, SKILLS & ABILITIES TOOLS AND MACHINERY CNC machines such as saws, press brake, manual mills, plasma cutter and CNC Flex machine. Tools include micrometers, Vernier's, scales, protractors, compass, height gage, dial indicator, tape measure, go-no-go gauges and squares. MATERIALS Personal protective equipment to include safety glasses, steel toed shoes, hearing protection, welding apron, face shield, and appropriate gloves. GENERAL Works under minimal supervision. Must be a self-starter with excellent problem solving and decision making skills. Acts decisively with a sense of urgency to maximize machine production and minimize down time. Strong knowledge of mathematics, to include geometry, to determine unknown part dimensions and/or relationships. Knowledge of metal types and characteristics. Understanding of the part use, fit and function as well as the manufacturing processes utilized is essential. Experience working with computers and machine controls. EDUCATION AND EXPERIENCE High school diploma or G.E.D. equivalent ADDITIONAL INFORMATION The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous, incidental, or substantially similar duties, which may be assigned during normal or emergency operations. Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

Job Title: Amada CNC Turret Operator Job Type: Full-time Location: Oxford, NC H3 Manufacturing is a leading integrated manufacturing solutions provider specializing in precision machining, laser cutting, sheet metal fabrication, complex welding, assembly, surface finishing, painting, and powder coating. With four state-of-the-art facilities spanning 225,000 square feet with locations in Illinois and North Carolina, we serve high-spec markets including power generation, healthcare, electrical power distribution, aerospace and defense, life sciences, and more. Position Summary: We're looking for a CNC Turret Operator to join our precision metal fabrication team on second shift. This position is responsible for setting up and operating CNC turret punch presses (Amada or similar) to produce high-quality sheet metal components. If you're motivated, detail-oriented, and take pride in turning flat sheet into precision parts, you'll fit right in. Responsibilities: • Set up and operate CNC turret punch presses according to production schedules and part specifications. • Load and unload sheet metal, ensuring proper alignment and material handling. • bInterpret blueprints, drawings, and job travelers. • Verify part dimensions and quality using precision measuring tools (calipers, micrometers, gauges). • Make machine adjustments and tool changes as required. • Inspect first-piece and in-process parts to maintain tight tolerances. • Perform basic maintenance and keep machines clean and in good working order. • Communicate issues or improvement ideas to the production supervisor. • Maintain a safe and organized workspace. • Machine operation for proper forming and quality control. • Work with team members to meet production goals and deadlines. • Maintain a clean, organized, and safe work environment. Required Qualifications: Education & Experience: • High school diploma or GED required. • Minimum of 2 years' experience in sheet metal fabrication or a related trade preferred. • Experience operating Amada or similar fabrication machinery a plus. Skills & Competencies: • 1-2 years of CNC turret punch experience (Amada preferred). • Ability to read blueprints and understand fabrication tolerances. • Familiarity with sheet metal types, gauges, and layouts. • Strong mechanical aptitude and problem-solving skills. • Able to lift up to 50 lbs and stand for extended periods. • Reliable attendance and strong attention to detail required. Work Environment: • Manufacturing floor environment with exposure to moderate noise, dust, and moving machinery. • Must adhere to all PPE and safety requirements. • Hours typically run from 4:00 PM - 2:30 AM, Monday through Thursday. Physical Requirements: • Ability to stand for extended periods. • Lift up to 50 lbs occasionally. • Frequent bending, stooping, and reaching. Benefits: • Retirement plan 401(k) with 401(k) match • Healthcare, Dental & Vision insurance • Flexible spending account or Health savings account option • Life insurance • Paid time off • Parental leave • Professional development assistance • Referral program ~~~~~~~~~~~~~~~~~~~~~~~~~~~ This position requires ITAR compliance and may involve access to technical data controlled under the International Traffic in Arms Regulations (ITAR). Sponsorship is not available now nor in the future. Applicants must be U.S. Persons as defined by ITAR. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ H3 Manufacturing Group, LLC is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should email *****************.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. ********************************************************************************************** Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. We are seeking a CNC Machinist V Programmer to join our team. We have a brand-new state-of-the-art facility which includes new equipment, a cafeteria, onsite fitness gym, golf simulator, outdoor tennis court, basketball court, and pickleball court. Your schedule will be Monday-Friday 7:00 AM - 3:30 PM, with overtime on a business need basis. Compensation • $1,500 Sign on Bonus* • Eligible for Annual Increases • Competitive Benefits Package, including first day Medical Benefits What You Will Do • Determine methods and procedures in daily activities and establishes approaches for new assignments or activities • Set-up and operate a variety of computer and mechanically controlled machine tools to produce and repair metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. • Operate and program machines to complete specific production steps or processes. • Monitor and verify quality in accordance with statistical processes or other control procedures • As a lead specialist, contribute to the development of concepts and techniques • Complete complex tasks in creative and effective ways • Apply advanced technical principles, theories, and concepts in a specialized field • Have general knowledge of all other related disciplines • Rely on advanced experience and judgement to plan and accomplish assigned tasks and solve problems • Conduct inspection of work produced and may inspect work of others • Provide solutions to problems that are complex • Develop and implement action plans to maximize performance and productivity Qualifications You Must Have • Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 6 years of related experience What We Offer Some of our competitive benefits package includes: • Medical, dental, and vision insurance • Three weeks of vacation for newly hired employees • Generous 401(k) plan that includes employer matching funds • Tuition reimbursement program • Student loan repayment program • Life insurance and disability coverage • Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection • Birth, adoption, parental leave benefits • Ovia Health, fertility, and family planning • Adoption assistance • Autism Benefit • Employee Assistance Plan, including up to 10 free counseling sessions • Healthy You Incentives, wellness rewards program • Doctor on Demand, virtual doctor visits • Bright Horizons, child and elder care services • Teledoc Medical Experts, second opinion program • And more! Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military, and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft, and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other - propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Piper Companies is seeking an experienced Machinist to support an in-house machining program for a leading pharmaceutical organization. This is a contract, on-site role based in Clayton, NC, ideal for a skilled professional with CNC programming expertise and a strong background in precision part manufacturing. Key Responsibilities of the Machinist: * Program and operate CNC lathes (Haas ST25LY) using G-code and onboard software. * Manufacture small batches of precision components, primarily in stainless steel with occasional Hastelloy. * Interpret technical drawings and 3D models to develop accurate machining programs. * Build and maintain a parts inventory, including scanning and programming components. * Train team members on CNC machine operation and best practices. Required Qualifications of the Machinist: * 6+ years of CNC machining and programming experience. * Proficiency with Haas ST25LY and G-code programming. * Strong background in 3D design and familiarity with CAM software. * Ability to produce custom parts and troubleshoot machining challenges. * Must be able to work on-site in Clayton, NC. Compensation of the Machinist: * $30.00 - $50.00 per hour, based on experience. * Contract position with potential for extension. Keywords: Machinist, CNC programming, Haas ST25LY, G-code, CNC lathe, precision machining, stainless steel, Hastelloy, 3D design, CAM software, small-batch production, Clayton NC jobs, contract machinist. #LI-GY #LI-ONSITE