Numerical control operator jobs in Rialto, CA - 403 jobs

Company Information Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect solutions to industries like Aerospace, Military & Defense Electronics, Space, Medical, Test & Measurement, and Industrial. Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. At Amphenol CIT, we make the amazing possible. Take the next step to become an integral part of our team by applying today and kickstart your journey with us. Summary Receives direction from the Maintenance Supervisor. The primary responsibilities include setting up and operating tooling and fixtures for the Model Shop, and completing all assigned tasks in accordance with the Router and Blueprint. Must adhere to all Machine Shop processes, including but not limited to Work Instructions (WI), Manufacturing Instructions (MI), and Operating Procedures (OP). All tasks are to be performed accurately, promptly, and independently, without the need for further instruction. Essential Job Functions Receive, review, and interpret Work Orders and tooling requirements for set-up. Work under the guidance of a Machinist III. Fabricate tooling, fixtures, jigs, and models to support manufacturing operations. Operate conventional equipment such as lathes, Bridgeport-type horizontal mills, surface grinders, band saws, pedestal grinders, and related support equipment. Maintain a clean and organized work area. Read and interpret blueprints, including understanding geometric tolerances. Complete all required documentation, including Work Orders. Troubleshoot and evaluate machining issues, and clearly communicate any discrepancies. Use all necessary inspection equipment relevant to the task. Support the Quality System by ensuring compliance with the company's Quality Manual, procedures, and policies. *Other duties as required in support of the department and the company* Supervisor Responsibilities Non-Supervisory Role The responsibilities of this role do not include supervising other employees. Qualifications To perform this job successfully, the individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION And EXPERIENCE Minimum of one year of experience as a machinist using conventional equipment High school diploma or equivalent Strong understanding of shop math, including geometry and trigonometry, as well as blueprint reading Effective oral and written communication skills Excellent hand dexterity, coordination, and precision Ability to communicate and collaborate effectively with individuals at all levels Strong attention to detail Language Requirements Excellent verbal and written communication skills in English. Conversational in any other language is a plus. PHYSICAL DEMANDS The physical requirements outlined below indicate those necessary to fulfill this position's core responsibilities. While performing job duties, the employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds and using a ladder may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodation will be provided according to ADA regulations to enable individuals with disabilities to perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Amphenol CDI is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. Personal Protective Equipment Requirements ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL Approximately 0-10% of travel is expected. Salary Information According to several states' laws, this position's salary range falls between $21.00 and $25.00 hourly. However, this salary information is merely a general guideline. When extending an offer, AmphenolCDI considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. AMPHENOL CIT RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." THE AFOREMENTIONED JOB REQUIREMENTS ARE SUBJECT TO CHANGE TO REASONABLY ACCOMMODATE QUALIFIED DISABLED INDIVIDUALS. Amphenol CIT is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. For more information regarding EEOC requirements please visit **************************************************************** *********************************************************************************************** Due to the nature of our business, the candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol CIT participates in the United States Department of Homeland Security E-Verify program. The E-Verify program is a web-based employment eligibility verification system for newly hired employees operated by the U.S. Citizenship and Immigration Services. Any candidate that needs an accommodation or assistance with the application process should contact HR at ********************************

Individuals assigned to the Machine Shop shall be able to use blueprints, drawings, sketches, or computer-aided design (CAD) and manufacturing files to program by using computer software such as Mastercam CAD/CAM, SolidWorks, and/or Fusion 360 for the Computerized Numerical Control machines and operate CNC machines to produce precision metal or plastic parts. Must also set up different types of equipment that are controlled by computers to accomplish goals with accuracy while maintaining high level of production rates. Operating the conventional milling machines, lathes, drill presses, and band saws as required to manufacture new products and/or repair or rework parts in accordance with engineering instructions and drawings. Basic Qualifications : Service Orientation: Passionate, effective demeanor in interactions with Guests and Cast Members Receptive to special requests Committed and reliable (reports for scheduled shifts) Encouraging of other Cast Members working on your team Detail oriented Ability to complete repetitious tasks while maintaining quality Ability to address and build appropriate solutions Interpersonal Skills and Abilities: Excellent written and verbal communication skills Capable of easily explaining sophisticated issues and procedures to others Excellent computer skills using MS Office or similar programs Additional Information : SUBMITTING YOUR APPLICATION After clicking “Apply for this job” below, the employment application will open in a new window. Please complete ALL pages of the application by clicking “Next” on each page, then “Submit” on the final page. SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, CNC, Milling, Machine, Programming The pay rate for this role in California is $41.11 to $50.05 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ****************************************

Mold Maker III will work with minimum supervision on new construction of Plastic Injection, Pultrusion, Compression and Rotational Molds, as well as Modifications and Repairs of the same. The Mold Maker will be expected to work with Senior Mold Makers as a support, Junior Mold Makers as a lead or independently as workload requires. The Mold Maker will also be expected to continue to improve their skill level and technical knowledge through interaction with coworkers and training opportunities as they are presented. ESSENTIAL JOB FUNCTIONS · Disassemble and assemble molds safely, efficiently and without damage. · Use advanced skills to produce new molds and to repair existing molds · Use support software like Word, Excel and Outlook · Set-up, program and operate as needed CNC, manual mill, radial arm drill press, lathe, EDM and surface grinder in safe, efficient and proper manner to produce quality workmanship · Perform routine maintenance on shop equipment · Follow verbal and written directions · Troubleshoot molds, dies and fixtures to suggest improvements or determine root cause of a problem · Participate in continual improvement efforts · Work from shop drawings, e-files, verbal instructions and sketches · Perform assigned work with little or no supervision · Repair Injection, Compression and Pultrusion molds as directed · Work with senior and lower level mold makers on new mold builds and repairs · Determine efficient material removal techniques, including speeds, feeds, cut depths and cutting tools · Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. · Execute each essential duty satisfactorily in order to perform job successfully. · Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. · Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. · Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. · Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. · Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). · Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. · Other duties as needed or required. ADDITIONAL RESPONSIBILITIES · Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Minimum of 10 years' experience in mold making and/or mold repair · Willing to continue to train and develop mold making technical skills/knowledge · Demonstrate competence in math, basic algebra and some trigonometry · Demonstrate mechanical aptitude · Speak and understand English proficiently · Must be a critical thinker, able to analyze and evaluate facts and circumstances that affect an issue · Must be able to clearly communicate information in verbal and written form PREFERRED QUALIFICATIONS · High School diploma or equivalent preferred but not required · Ability to conceptualize PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, twisting at the neck and waist, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 25 lbs. · Working around equipment and machinery PPE REQUIREMENTS · Safety glasses · Steel-toe slip-resistant shoes Face covering (mask) in accordance with company policy. Mold Maker COMPENSATION RANGE: $34.96 - $40.00 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Job DescriptionBuild the future, faster. At Layup Parts, our mission is simple: deliver composite parts faster. We're not just another machine shop-we're a technology-first manufacturing startup that's revolutionizing how composite tooling and parts are made for the aerospace, defense, and motorsports industries. Our customers are developing tomorrow's high-tech products, and we are building technology to accelerate their success. We design, machine, print, and build faster than anyone else in the industry-and we're looking for machinists who thrive in high-performance environments and want to be part of the team that's redefining what's possible in advanced manufacturing. We value initiative and attitude and are building a team of outstanding individuals who take pride in their work, enjoy mentoring and learning from others, and are eager to tackle any challenge. What You'll Do: This isn't your typical operator role-you'll be hands-on in a cutting-edge, high-mix shop where no two days are the same. You'll: Set up and operate 3- and 5-axis CNC machines, including either Zimmerman, HAAS mills, and Lathes. Run both billet and non-traditional stock (e.g., 3D prints, foam, castings). Collaborate with engineering to provide real-time DFM feedback and drive rapid iteration. Occasionally work with LFAM 3D printers and get hands-on with hybrid manufacturing workflows. Perform post-process and in-process inspection of molds, tooling, and final parts using standard metrology tools. Move quickly between R&D prototypes and low-rate production runs. Communicate actively across teams-engineering, composites, inspection, and operations. Who You Are: Be awesome! Be the kind of person you want to work with! You take ownership of your work and always bring a “get it done” attitude. You thrive in fast-paced, ambiguous environments where speed matters. You're not just a machinist-you're a builder, a problem-solver, and a teammate. You believe in craftsmanship, but you're not precious-you prioritize iteration and progress. You take pride in high-quality output and speak up when something isn't right. Must-Haves: 5+ years of CNC machining experience including setup, tooling, and troubleshooting. 3+ years operating 5-axis gantry mills. Strong knowledge of G and M code and CNC operations. Familiarity with inspection tools like calipers, micrometers, and height gauges. Ability to lift 50 lbs, stand for long periods and work hands-on in a production setting. Willingness to learn new machines, processes, and tech on the fly. Bonus Points: Background in aerospace, defense, or motorsport tooling and mold making. Experience machining from complex or non-rectangular stock (e.g. foam blocks, prints, castings). Comfortable with Siemens or HAAS controllers. Past work in both R&D/prototype and production environments. Exposure to 3D printers (any type), hybrid workflows, or additive-subtractive processes. CAM experience with Tebis, Fusion, or ESPRIT. CAD familiarity with NX, SolidWorks, or CATIA. If willing to work 2nd shift, 1PM - 9PM. Why Layup Parts? Real Impact - You'll work on critical parts for some of the most demanding industries in the world. Tech-Driven - We blend software, 5-axis machining, and 3D printing to move fast and innovate constantly. No Bureaucracy - You'll be trusted to own your work, solve problems, and help us scale. High-Mix, Fast-Paced - From prototypes to low-rate production, you'll never be bored. Compensation and Benefits: Hourly Range: $30 - $45 per hour. Final compensation is based on your experience, skills, and what you bring to the table. Equity Option Grants: Most full-time team members receive stock options-because we believe in shared success. Full Benefits Package: Medical, dental, and vision coverage, short- and long-term disability insurance, company-paid life insurance Time Off That Respects Your Time: Competitive PTO plan with paid vacation, holidays, and leave options. We're not just building parts-we're building momentum. You'll be part of a small, fast, and tight-knit team tackling real engineering challenges every day. If you're ready to work hard, move fast, and push boundaries, you'll fit right in. Equal Opportunity Layup is an equal-opportunity employer. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance. ITAR Requirements To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Hourly Pay Range: $37.25-$41.00 **All Applicants must comply with ITAR Requirements. US Citizens or Permanent Residents only** Summary: Reporting to the Head of Machining Operations, the Machinist III is responsible for operating manual and CNC machine tools, including 5-axis gantry mills, vertical and horizontal milling centers, horizontal and vertical turning centers, etc. in support of production and development machining. Critical thinking and collaboration are required to evaluate and resolve unique equipment and product issues in a demanding production environment. Core Responsibilities: All functions of a Machinist II Communicate with other departments to keep product flowing Ensure the personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Proper selection of tools per application Apply understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Apply advanced understanding of probe cycles and functions Read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that do not require CMM, GOM, VeriSerf layout Additional Responsibilities: Other duties as assigned Qualifications: Must be able to comply with ITAR and EAR residency requirements Demonstrated knowledge of machining procedures and practices Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proven track record of operating safe facilities. Fluent in English; Bi-lingual is a plus Education/Experience: High school diploma or equivalent A minimum of 5 years of experience in a manufacturing environment operating CNC mills and lathes. (with) completion of vocational training or an apprenticeship Skills: Required: All skills required of a Machinist II Effective communication techniques for collaboration with other departments Methods for ensuring personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Demonstrate proper selection of tools per application Understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Advanced understanding of probe cycles and functions Ability to read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that don't require CMM, GOM, VeriSerf layout

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 2: 2-10:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) + $3.00 Shift Differential Responsibilities Operate and monitor assigned machinery and equipment according to established procedures and safety standards. Perform routine maintenance and cleaning of machines to ensure optimal performance. Read and interpret blueprints, work orders, or production schedules to determine job instructions. Inspect parts and finished products for quality and accuracy using measuring tools. Record production data, including output, downtime, and defects. Adjust machine settings as necessary to maintain product specifications and minimize waste. Collaborate with team members and supervisors to meet daily production goals. Report any mechanical issues or safety concerns to maintenance or supervisory staff. Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications High school diploma or GED is a plus; vocational or technical training preferred. Previous experience in a manufacturing or production environment is a plus. Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. Familiarity with machining processes such as cutting, drilling, or grinding. Mechanical aptitude and the ability to troubleshoot minor equipment issues. Basic math and measurement skills. Ability to read and interpret technical documents, blueprints, or schematics. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment. Willingness to work flexible hours or shifts as needed. Work Environment: Regular standing, bending, reaching, and lifting up to 50 lbs. Use of hands and manual dexterity for precise machining and tool work. Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Duties & Responsibilities: · Maintain on-time deliveries for all jobs in production. · Maintain quality control procedures. · Maintain and promote ISO and/or certified quality standards. · Coordinate efforts with purchasing, assembly, & QC to move jobs through production workflow in a timely manner. · Make machine & tool adjustments as needed to maintain part conformance. · Able to set up and run CNC Swiss Lathe turning centers or Live Tool Lathe machines. Able to program Fadel CNC machine with set up. · Able to create detailed setup and work instructions. · Able to deal with tight tolerances +-.0001 on low-volume Tooling projects (ex. electrodes) · Able to deal with tight tolerances +-.001 on medium to higher volume parts. · Mastery of working with small parts, ie. size of parts that fit in the palm of your hand. · Management ability · Able to train other machinists to set up & run production parts. · Adjust part dimensions with offsets, change inserts, tool center centering, adjust/replace collets & guide bushings. · Able to design & mill fixtures for production runs. · Consistently clean & maintain machines & related equipment to ensure optimal condition. · Creates process instructions that identify operations, tool sequences, fixtures, speeds, and feeds for parts requiring any type of machining operation. · Perform any other duties assigned by the immediate supervisor/Plant Manager. Required Knowledge, Skills, & Abilities Mastercam programming skills - X9 is the current version in use (5+ years) Master machinist Level A machinist or Tool/Die Certification Project Management experience Extensive experience programming 4-axis, 5-axis, & 3-D contour complex precision parts Ability to program, setup, and initiate new production runs through FAI (5+ years) In depth knowledge of materials and tool selection for proper application In depth knowledge of set-up techniques to ensure optimum quality and productivity through the manufacturing process Physical Requirements: Ability to move around an office environment and on the production floor. Must be able to occasionally lift and/or carry up to 20-25 pounds. Must be able to continuously stand and/or walk for extended periods of time on concrete surfaces. Ability to repeatedly kneel, bend, crouch, reach, and/or stoop throughout the shift as needed to successfully perform job duties. Benefits: Medical, Dental, Vision, 401K with company match, Life Insurance, Vacation, Sick leave, and Holiday Pay Pay Rate $ 27 - $30per Hour (Depending on Education and Experience)

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 2: 2-10:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) + $3.00 Shift Differential Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Machinist II is responsible for performing basic machine setups and operating fabrication machinery. ESSENTIAL FUNCTIONS OF THE JOB: Performs simple setups and operates a variety of machines, tools and other equipment (with major focus on lathes, mills, grinders, honing machines, drill presses, but may also include hydraulic or pneumatic presses, bench grinders, deburring and polishing tools, and manual operations) to produce parts per instructions, blueprints or other technical drawings . Properly maintains and performs minor routine maintenance to machines utilized. Evaluates parts or material by measuring with appropriate instruments and may perform simple testing to validate parts or material conforms to requirements. Documents information as required per the work instruction or as instructed and reports any discrepancies to the supervisor, lead, and/or engineer. Maintains a safe work environment and adheres to all safety procedures and protocols, including the use of personal protective equipment (PPE). Supports area organization and fosters a continuous improvement mindset. Adheres to the company's policies and promotes a healthy and positive work culture The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 3-5 years of recent working experience in CNC Lathe. Completion of a 2 year technical/trade school in machining (preferred). KNOWLEDGE/SKILLS/ABILITIES: Must be able to read engineering blueprints and planning. A positive attitude, excellent communication skills, strong multitasking ability, and an interest in learning new skills/technologies required. MUST be well organized, works well with others and flexible. Broad skill set who is not afraid to tackle multiple tasks. Knowledge of tooling speeds and feeds offsets and minor program changes. Ability to prove out programs. Setup, program, and operate two CNC Lathes (Okuma). Perform tool adjustment as required. Work with Engineering to make tooling. Able to use inspections tool to inspect parts. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $24-28 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Career Opportunity - Day and Night Shift Machinists - Acromil LLC - Corona, CA Our Company Using state-of-the-art technology, Acromil, LLC in City of Industry, CA has been a primary supplier to the Commercial and Defense Aerospace Industries of complex structural components and assemblies since 1959. Acromil pursues its vision of excellence by providing the highest quality products, on time and at competitive prices within a culture of integrity and pride. This vision lead us to the acquisition of a similar business operation located in Corona, CA in September, 2018 for a total footprint of 200,000 square feet. Acromil's increased capacity will further our goal of being a World Class Supplier. Our Opportunity We have two positions available. One Day Shift (6:00 am - 2:30pm) and One Night Shift (6:00pm - 2:30am). The selected individual will independently set-up and operate CNC Machines according to job and program specifications while ensuring that quality, dimensions, and key characteristics are maintained. Must have knowledge of CNC's, single and Multi-Spindle machine tools such as: ESSENTIAL DUTIES: Handtmann HBZ Trunnion 120, Handtmann HBZ CC 400, Handtmann PBZ HD 600 SNK High Speed Tilt Table UHP-120B,SNK High Speed Horizontal Tilt Table HPS-4B,SNK RB-200F,SNK Vertical Cincinnati 3 spindle gantries, Cincinnati high speed 3 spindle gantries, Cincinnati Vertical Mills OKK Horizontal mills, OKK High Speed vertical mills 3 axis, 4 axis and 5 axis machines, using Fanuc, Siemens 840D, and Cincinnati 950 controllers. QUALIFICATIONS: Qualified individuals will have 5 years related work experience in an Aerospace Manufacturing environment and familiar with our machine line. Must be able to stand for 8 hours in a day/night, lift/carry up to 50 pounds, keen eye-hand coordination, able to be trained and certified as a Forklift & Crane Operator. Person must be an United States (US) Person as defined by ITAR Regulations - A United States (US) Person is a citizen of the United States, a lawful permanent resident alien of the US, (a "Green Card" holder), a refugee or someone in the USA as a protected political asylee or under amnesty. EDUCATION/EXPERIENCE: High School Diploma or GED required. Requires 5+ years working in a manufacturing environment with duties similar to those listed above. LANGUAGE SKILLS: Ability to read and interpret documents such as operating procedures and general instructions, machine manuals, employee handbook, company policies and departmental procedures, etc. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. PHYSICAL DEMANDS : The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to sit; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Receipt of this does not imply nor create a promise of employment, nor an employment contract, or in any way change my at-will employment status. This job description is representative of the duties and responsibilities of the position but may not be inclusive of every aspect of the position. Benefits We offer Medical, Dental, Vision, Life Insurance and a 401(k) plan with Employer's match, safety incentives and an employee referral bonus program. We also provide paid holidays, vacation and sick days. EEO We are proud to be an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

We are seeking an experienced 3 axis CNC Machinist, 1st Shift for our Corona, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: Corona, CA Compensation & Benefits: * Medical, Dental, Vision * Company Paid Life Insurance * 401(k) Retirement Savings Plan * Paid Time Off (PTO) * Paid Holidays * Tuition Reimbursement* RESPONSIBILITY & AUTHORITY: * Maintain and Realize AS 9100 procedures and continuous improvement efforts. * Maintain a clean and organized work environment. * Keep the CNC clean and general maintenance up to date. * Keep machine fixtures clean and stored properly. * Work with Management to prioritize machine schedule. * Work with programmers in order to minimize set-up and manufacture time. * Order cutters and tooling as required to support manufacturing. * Operate the CNC. * Report to Management recommendations and / or concerns that will affect quality or time management. * Must understand how customer products are impacted in the event of failure. * Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: * Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. * Must have experience with Siemens 840D and Fanuc 31i - B5 Controls. * Must have excellent blueprint interpretation skills. * Must have thorough understanding of machine set-ups, tooling, and cutters. * Must have direct communication with internal customers. * Must be trained of applicable changes & customer requirements. * Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: * High school graduate or equivalent work experience. * Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: * Constant standing/walking/sitting for at least 8 hours. * Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. * Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. * Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. * Prolonged periods of repetitive movement are required. * Constant holding, grasping, turning, or otherwise working with the hand(s). * Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: * This position operates in a warehouse/shop/manufacturing environment. As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. ITAR REQUIREMENTS: * To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. 1st Shift | 5:00 AM to 5:00 PM 2nd Shift | 5:00 PM to 5:00 AM

EZONYX BIO TECHNOLOGIES, INC.™ IS A FULL-SERVICE BIOPLASTICS COMPANY THAT SPECIALIZES IN SUSTAINABLE PRODUCT INNOVATION AND THE MANUFACTURING OF PROPRIETARY BIOPOLYMER RESINS, PROVIDING COMPREHENSIVE DESIGN AND DEVELOPMENT SOLUTIONS FOR COMPANIES SEEKING ALTERNATIVES TO CONVENTIONAL PLASTICS. Job Description Plastic Injection Mold Maker (Los Angeles) EZONYX BIO TECHNOLOGIES, Inc We are a dynamic technology start-up currently developing more than 100 innovative products and inventions with multiple utility patents field with USPTO. We are seeking an experienced plastic injection mold maker to join our engineering team in the research, development, optimization and launch of biodegradable and compostable plastics. This candidate will focus on mechanical and technical improvements for plastic extrusion, molding and other thermoforming processes to meet company goals. Responsible for laying-out, building, fine-tuning and repairing injection molds. Essential Duties and Responsibilities: Competent, safe operation of manual milling machines and lathes Programming, set-up and operation CNC milling machines, CNC WEDM machines (Charmilles and Sodick), CNC Die sinking EDM machines, Manual EDM machines, saws, surface grinders 3 axis and 5 axis CNC operation Interpret customer-supplied parts, drawings, and computer files Mold layout, including materials, gates, vents, parting lines, overall size, shrinkage, heat transfer Utilize any/all machine centers to achieve desired results Fabricate high-quality injection molds Meeting schedule commitments (on-time build) Fine-tune molds based on feedback from molding department Repair molds based on feedback from molding department Conduct complicated mold maintenance as needed T/R housekeeping, keep machine centers and personal tools orderly Notify manager or project manager of any materials or tools required Participate in corrective / preventive action reviews (assist production in troubleshooting) PLEASE SUBMIT CURRENT RESUME AND COVER LETTER AND LET US KNOW HOW YOU CAN BENEFIT THE COMPANY WITH YOUR SKILLSET. Compensation: Salary bonus based on Performance Qualifications Essential Duties and Responsibilities: Competent, safe operation of manual milling machines and lathes Programming, set-up and operation CNC milling machines, CNC WEDM machines (Charmilles and Sodick), CNC Die sinking EDM machines, Manual EDM machines, saws, surface grinders 3 axis and 5 axis CNC operation Interpret customer-supplied parts, drawings, and computer files Mold layout, including materials, gates, vents, parting lines, overall size, shrinkage, heat transfer Utilize any/all machine centers to achieve desired results Fabricate high-quality injection molds Meeting schedule commitments (on-time build) Fine-tune molds based on feedback from molding department Repair molds based on feedback from molding department Conduct complicated mold maintenance as needed T/R housekeeping, keep machine centers and personal tools orderly Notify manager or project manager of any materials or tools required Participate in corrective / preventive action reviews (assist production in troubleshooting) Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description About the Opportunity: Take your career to new heights with a leading company in the Aerospace Research and Development industry. Our client is renowned for their precision and innovation in the aerospace wind tunnel model field. They are seeking a meticulous and skilled CNC Mill Machinist to join their team. In this role, you'll have the opportunity to contribute to cutting-edge aerospace projects, crafting complex contoured components that make a genuine impact on aerospace technologies. Responsibilities: Execute setups and operate CNC mills to machine precise, tight-tolerance parts for aerospace applications. Program CNC mills to optimize tool paths and machining strategies for complex contoured components. Select and apply appropriate tools, feeds, and speeds for machining aerospace-grade materials such as aluminum and titanium. Inspect and verify parts to ensure they meet rigorous quality standards using precision measuring instruments. Interpret and work from blueprints and engineering drawings, including GD&T specifications. Requirements: Minimum of 5 years of practical experience as a CNC Mill Machinist in precision prototype or aerospace manufacturing. Proficient in CNC mill setup, operation, and programming for high-precision results. Strong understanding of tool selection, feeds, speeds, and machining strategies for specialized materials. Skilled in using precision measuring instruments for part verification. Able to read and apply engineering drawings and GD&T specifications. U.S. citizenship or Permanent Residency required (per U.S. Export/ITAR regulations). DOD clearance required for this position. Benefits & Perks: Competitive pay range based on experience Immediate employment opportunities. Comprehensive benefits package supporting professional and personal growth. Why Apply Through Total Aviation Staffing? Total Aviation Staffing connects aviation professionals with top-tier opportunities across the industry. Whether you're looking for roles in: Commercial Aviation - Passenger airlines, cargo operations, and aircraft leasing Business & General Aviation - Corporate jets, charter services, and private aviation MRO & Aftermarket Services - Aircraft maintenance, repair, overhaul, and parts distribution Aerospace & Defense - Military aviation, space systems, and defense programs Aviation Technology & Manufacturing - OEMs, avionics, propulsion, and emerging technologies Even if this role isn't the perfect fit, applying with us gives you access to multiple career opportunities that may not be publicly advertised. Work with top companies in aviation and aerospace. Get priority access to multiple job openings. Receive expert career guidance from specialized aviation recruiters. Apply today to take the next step in your aviation career.

Job DescriptionDescription:Temp-to-hire The Mill Machinist is responsible for the set up and operation of CNC Mills to perform machining operations, such as turning, boring, threading and facing, on metallic or nonmetallic work pieces according to specifications for the aerospace and other industries.Duties and Responsibilities: Operate Set up Mori Seiki and/or HAAS Mills with Fanuc and HAAS controls. Make changes to offsets and change/touch off tools. Ability to read and explain Blueprints, Engineering Changes, and Manufacturing Instructions. Mathematics skills: Geometry, Algebra and Trigonometry. Comprehensive understanding of mechanical components, tooling and fixtures. Use of all measuring instruments including Dial Bore Gauge, Micrometer and Comparator. Comprehensive understanding of tool geometries, materials, and coatings. Must be knowledgeable in tooling selection and speeds / feeds. Problem solving skills. Accurately complete all required documents (Router, Production Inspection Report, Programs, etc.). Maintain a safe, clean and orderly work area. Must be able to be able to listen carefully to verbal and written instructions. Must be able to load material in and out of the machines. Must keep machine properly maintained. Any other duties as required. Physical Requirements: Ability to squat and kneel on an occasional basis. Ability to twist and bend the neck and waist on a constant basis. Ability to stand up to 10 hours per day. Ability to lift and carry up to 50 pounds on a constant basis. Monday-Friday7:30 am - 4:00 pm $25/hr. #PROD2

Hourly Pay Range: $37.25-$41.00 **All Applicants must comply with ITAR Requirements. US Citizens or Permanent Residents only** Summary: Reporting to the Head of Machining Operations, the Machinist III is responsible for operating manual and CNC machine tools, including 5-axis gantry mills, vertical and horizontal milling centers, horizontal and vertical turning centers, etc. in support of production and development machining. Critical thinking and collaboration are required to evaluate and resolve unique equipment and product issues in a demanding production environment. Core Responsibilities: All functions of a Machinist II Communicate with other departments to keep product flowing Ensure the personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Proper selection of tools per application Apply understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Apply advanced understanding of probe cycles and functions Read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that do not require CMM, GOM, VeriSerf layout Additional Responsibilities: Other duties as assigned Qualifications: Must be able to comply with ITAR and EAR residency requirements Demonstrated knowledge of machining procedures and practices Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proven track record of operating safe facilities. Fluent in English; Bi-lingual is a plus Education/Experience: High school diploma or equivalent A minimum of 5 years of experience in a manufacturing environment operating CNC mills and lathes. (with) completion of vocational training or an apprenticeship Skills: Required: All skills required of a Machinist II Effective communication techniques for collaboration with other departments Methods for ensuring personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Demonstrate proper selection of tools per application Understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Advanced understanding of probe cycles and functions Ability to read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that don't require CMM, GOM, VeriSerf layout

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Job Description COME JOIN OUR TEAM! Without the strength of our Machine Shop team, we would not be able to offer the industry-leading service we're known for. We're seeking an experienced CNC Machinist Professional. The ideal candidate will have proven industry experience as a CNC Machinist. As a strong communicator and skilled hands-on CNC Machinist, you will operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. The CNC machinist shall also be aware of ethical behavior and conduct themselves accordingly to Karman policies and procedures. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California, 1 location in Mukilteo, Washington and 1 location in Wilsonville, Oregon. Equal Opportunity Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. DUTIES/RESPONSIBILITIES: Maintain and Realize AS 9100 procedures and continuous improvement efforts. Maintain a clean and organized work environment. Keep the CNC clean and general maintenance up to date. Keep machine fixtures clean and stored properly. Work with Management to prioritize machine schedule. Work with programmers in order to minimize set-up and manufacture time. Order cutters and tooling as required to support manufacturing. Operate the CNC. Report to Management recommendations and / or concerns that will affect quality or time management. Must understand how customer products are impacted in the event of failure. Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. Must have excellent blueprint interpretation skills. Must have thorough understanding of machine set-ups, tooling, and cutters. Must have direct communication with internal customers. Must be trained of applicable changes & customer requirements. Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: High school graduate or equivalent work experience. Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: Constant standing/walking/sitting for at least 8 hours. Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. Prolonged periods of repetitive movement are required. Constant holding, grasping, turning, or otherwise working with the hand(s). Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: This position operates in a warehouse/shop/manufacturing environment. TRAVEL REQUIREMENTS:

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: Set up and operate Speed Lathes, Hone, and occasionally CNC lathes in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation. Must model safe behaviors. Must have evening availability for 2 nd Shift from 3:30pm until 12:00am. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: High school diploma or General Education Degree (GED) required. Experience: Must have at least two years of current CNC lathe setup experience. Formal CNC training experience preferred. Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves. Ability to read and interpret engineering prints. Ability to make decisions, communicate effectively, and work well with others in a team environment. Must be a quick learner. Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $20 to 25/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.2-1/2

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: Set up and operate CNC machines (lathe/mill) in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation. Must model safe behaviors. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: High school diploma or General Education Degree (GED) required. Experience: Must have at least five years of current CNC lathe setup experience. Formal CNC training experience preferred. Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform routine maintenance and troubleshooting on machines. Skilled to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves. Skilled to inspect finished parts using precision measuring tools (calipers, micrometers, etc.). Ability to read and interpret engineering prints. Ability to make decisions, communicate effectively, and work well with others in a team environment. Must be a quick learner. Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $19 to 22/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.1-1